HigH-torque direct drive rotary servomotor - Moog Inc. · PDF fileHigH-torque direct drive...
12
What moves your World advanced direct drive technology in a compact, customized package for high-power applications HigH-torque direct drive rotary servomotor
Transcript of HigH-torque direct drive rotary servomotor - Moog Inc. · PDF fileHigH-torque direct drive...
What moves your World
advanced direct drive technology in a compact, customized packagefor high-power applications
HigH-torquedirect drive rotaryservomotor
�
Moog’s new line-up of customized High-Torque Direct Drive Rotary Servomotors provides exceptional power and control without increasing machine size. With peak torque up to 50,000 Nm, they are ideal for high- speed applications such as press work, injection molding, laser cutting, and sheet metal punching. An extraordinary response pattern, customized motor characteristics, and original control solutions provide a significant performance edge, with implementation costs able to be recovered in just one to two years. Read on to find out more about this exciting technology…
�
Machine builders are increasingly being forced to adapt their designs to fit a number of globally uniform motion control components such as ballscrews, controllers, and servomotors. A performance edge is a strong appeal point for end users. However, increased use of standard components makes this difficult to achieve. Moog has tackled this issue head on with a new line-up of High-Torque Permanent Magnet Rotary Servomotors incorporating advanced direct drive technology in a customized package. With peak torque up to 50,000 Nm and a very compact design, these motors deliver the power and control required for large, high-speed applications without proportionate increases in machine size.
Fitting motors to the mechanism, not the mechanism to motors
�
investment in PerFormance
Moog’s Direct Drive Servomotors are an investment in performance-enhancing technology that simplifies drive systems, improves control, and reduces assembly time to provide greater value for machine builders and end users alike.
Advantages over conventional servomotors
Conventional rotary servomotors are connected to loads via mechanical transmissions such as gearboxes and belt drives. However, mechanical transmissions cannot provide optimal performance due to inherent backlash and compliance which affects repeat and position accuracy. A larger moment of inertia also affects motor response and velocity control. Eliminating these wear-prone, redundant components with a Moog Direct Drive Servomotor allows machine length to be reduced, renders the motion control system maintenance free, improves reliability, cuts operating noise and frictional heat losses, and reduces machine assembly time.
Advantages over servo-hydraulic systems
Servo-hydraulic systems are more demanding than electric. Oil must be kept clean and there is an inherent fire risk. They also consume large amounts of electricity because pumps are operated continuously. Accuracy is a challenge due to changes in hydraulic fluid viscosity as machine temperature rises, and the large number of components involved impacts machine assembly time.
A leading injection molding machine builder found operational problems reduced by 90 percent when it switched to direct drive servo-electric technology because problems such as filter blockages, valve seizures, and oil leaks were eliminated. Machine builders in other application areas have found trouble disappeared altogether.
Direct drive servomotor benefits
Increased accuracy
Maintenance free
Improved reliability Faster
response
Reduced machine
length
Stepless movement
Less operating
noise
Higher efficiency
Reduced assembly
time
�
Moog knows that a motor’s performance is not determined by its kilowatt output, but by how much torque it has. Focusing on this important yet often neglected fact in motor design enables us to extract more torque from a given kilowatt size. Moog Servomotors are up to �0 percent smaller than equivalent direct drive offerings and permit exact torque requirements to be matched with any motor speed between �00 and 1000 rpm.
This line-up of direct drive motors also provides more peak torque at a higher range to enable electrification of larger tonnage machines. The top model is one of the world’s largest synchronous servomotors with 50,000 Nm peak torque. Rated torque ranges from 185 Nm to 17,000 Nm. Motor performance is enhanced via water- and fan-cooling.
more torque without increasing machine size
Application 1: Press work
The superior control characteristics of Moog’s direct drive technology make it the ideal development platform for advanced techniques such as net shaping and intelligent pressing. Gearboxes can be eliminated from crank-type presses up to 50 tons. Gears ratios such as 10:1, or less, can be used on crank-type machines from 50 to �,000 tons for significant space reduction and cost savings compared with conventional servomotors which use expensive torque gears to reduce backlash.
50000
45000
40000
35000
30000
Short (Motor length)Medium Long
25000
20000
Motor Line-up
Frame Size (mm)
Peak
Tor
que
(Nm
)
15000
10000
5000
0
825
375
290
450
550
Motor Line-uP
7
solutions designed around you
These high-torque servomotors are ideal for both crank and ballscrew type injection molding systems. They can be applied to the injection axis of 500 to �,000 ton machines and the plasticizing axis of even the largest hybrid machines. Either way, they greatly reduce machine envelopes. Their low-speed, high-torque characteristics enable use of long lead ballscrews on the injection axis for longer ballscrew life. Hollow pancake designs on the plasticizing axis reduce overall machine length.
Application 2: injection molding
Faster response
Moog Servomotors have an extraordinary response pattern that matches the requirements of the most dynamic applications. They combine high peak torque with a low moment of inertia for faster response, improved accuracy, and stepless movement during high-speed operation. Response time is up to half that of conventional servomotors with gearboxes.
Design flexibility
Moog customizes the characteristics and packaging of these motors to provide higher performance and machine design flexibility than previously possible. Stator design can be customized to maximize peak or rated torque for a motor with the optimal performance characteristics for
each given application. Every kind of shaft and hollow shaft configuration can be accommodated to enable greater originality in machine design. For example, flange, spline, key, and thread configurations are available and hollow shafts can be freely enlarged to pass cables or house mechanical components to reduce machine length.
The motor can provide the bearing unit for the machine or alternatively the machine can provide the bearing unit for the motor for cost reduction and ease of installation. Taper roller bearings can be accommodated for high radial and axial loads, and thrust bearings when ballscrews are used. Electromagnetic brakes in sizes not supplied by brake manufacturers are available for the largest applications.
Drive solutions
Moog provides customized drive solutions for easier operation, faster set up, optimal performance, and size advantage, especially on medium to large capacities. Solutions include original programs for control of machine axes and customization of drive shape and configuration. Drives can be separated into heat producing and non-heat producing stages to enable more efficient cooling processes, and multiple circuit configurations provided for optimal control of larger motors. Water-cooling and customized mounting are also available.
Moog Direct Drive Motor
0.028 0.058
300 Conventional Servomotor with Gearbox
resPonse tiMe
spee
d (r
pm)
time (s)
8
Coming from servo-hydraulic systems
The greatest advantage for machine users in switching from hydraulic to electric systems is savings on power charges. High-speed applications which run hydraulic pumps continuously can recover the cost of direct drive motors in one to two years through savings on electricity costs. Servo-electric presses only consume 10 to �0 percent of the electricity required by their hydraulic counterparts, while all-electric injection molding machines only consume �0 to �0 percent of hydraulic machines.
Consumables such as hydraulic fluid and filters are no longer required and maintenance burden is greatly reduced. Servo-electric machines are also inherently safer than hydraulic-based processes because they eliminate the need to handle and manage large quantities of hydraulic fluids. In some cases, removal of servovalves, accumulators, manifolds, pumps, and hoses even reduces overall machine cost. The elimination of these components in a servo-electric system also simplifies machine assembly.
Coming from conventional servo-electric systems
Servomotors are intended to be maintenance-free. However, use of conventional servomotor systems on applications requiring different torques or motor speeds complicates power transmission design through the addition of mechanical couplings using gearboxes or belt drives. The use of such mechanical transmissions initiates a series of inefficiencies that snowball into higher operating costs for end users.
Gearboxes and belt drives also introduce problems with tuning and position inaccuracy. The increased number of components involved tax design and integration resources, while part failures increase maintenance burden and reduce output. Removing backlash or compliance from mechanical transmissions is very expensive and prone to further problems with thermal expansion and performance.
reducing total cost oF ownershiP For end users
Application 3: Laser cutting
This technology provides higher traverse speeds on laser cutting machines. A compact, high-torque hollow motor directly drives the nut, and not the ballscrew. This minimizes inertia and eliminates skipping that occurs when motors drive long screws. Combined with a long lead ballscrew, this enables laser heads to be rapidly and accurately positioned for clear performance advantage.
9
it all starts with a “yes”: moog total suPPortYes, we can help you. Whether you are considering switching from hydraulic to servo-electric systems, from conventional electric systems to direct drive motion control, looking to refit a machine or design a completely new one, Moog is here to support you.
Our trained engineers, based in �� countries around the world, bring a dynamic and collaborative approach to helping you solve your engineering problems. That’s because, instead of starting with a particular motor, we start with a thorough understanding of your application. By addressing your unique needs, we can customize the ideal motor specifications for your largest applications—with no artificial barriers to originality or performance.
Contact your nearest Moog representative today for an introduction to this unique direct drive servo-electric technology.
These direct drive servomotors can be used to improve the performance of turret punch presses with punching capacities from �0 to 50 tons. Converting the ram drive from servo-hydraulic to direct drive improves accuracy, reduces operating noise, and increases hit rates. Energy savings associated with servomotor implementation are further increased by Moog’s drive regeneration technology.
Application 4: sheet metal punching
10
sPeciFications and mounting
These servomotors come in five frame sizes, with three different stack lengths per frame. Different voltage ratings are available including �-phase ��0V and �00V for maximum flexibility and robust operation. The standard feedback device provided with the motors is an absolute encoder. However, incremental encoder and resolver are also available.
Mounting diagram
servomotor specifications
Frame size mm 290x290 375x375 450x450 550x550 825x825
motor length* (short, medium, long) s m L s m L s m L s m L s m L
motor length mm �18 ��8 ��8 ��8 �98 5�8 ��� �7� ��� ��8 �88 788 ��� ��� 9��
Nominal power
Fan-cooled kW 18 �7 55 �� �5 105 �� �8 10� �0 1�0 ��0 81 1�� �85
Water-cooled kW �� �7 99 �7 118 189 �1 1�� 185 108 �1� ��� 1�� �9� 510
rated torque
Fan-cooled Nm 185 �70 550 �50 875 1�00 �80 1�70 �050 1500 �000 �000 �7�0 5��0 95�0
Water-cooled Nm ��� ��� 990 ��0 1575 �5�0 1��0 ���0 �700 �700 5�00 10800 �890 9790 17000
Peak torque Nm 800 1�00 ��00 1�00 �000 �800 �850 5700 8500 5�00 10500 �1000 1�000 �8500 50000
rated speed rpm 1000 750 500 �00 �00
max. speed rpm 1500 1�00 750 �00 �00
2 x 75mm (for 550 and 825 Frame)
Water-cooling: 4 x 25mm
Fan-cooling: 2 x 71mm (for 290, 375 and 450 Frame)
75
Frame SizeMotor Length
*See chart on page �.
Whenever the highest levels of motion control performance and design flexibility are required, you’ll find Moog expertise at work. Through collaboration, creativity, and world-class technological solutions, we help you overcome your toughest engineering obstacles. Enhance your products’ performance. And help take your thinking further than you ever thought possible.
moog.com/industrial
For the Moog location nearest you, visit moog.com/industrial/globallocator.
What moves your World
©�00� Moog Inc.
Moog is a registered trademark of Moog, Inc. and its subsidiaries. All trademarks as indicated herein are the property of Moog, Inc. and its subsidiaries. All rights reserved.
Specifications may be revised without notice. Comparisons based on internal Moog data.
DDR Servomotor CDL 7150 500-5�8 0�0� Mobium/PDF
Argentina +54 (0) 11 4326 5916 [email protected]
Australia +61 (0) 3 9561 6044 [email protected]
Austria +43 (0) 1 688 1384 [email protected]
Brazil +55 (0) 11 5523 8011 [email protected]
China +86 (0) 21 5854 1411 [email protected]
Finland +358 (0) 9 2517 2730 [email protected]
France +33 (0) 1 4560 7000 [email protected]
Germany +49 (0) 7031 622 0 [email protected]
Hong Kong +852 2 635 3200 [email protected]
india +91 (0) 80 2668 9947 [email protected]
ireland +353 (0)21 451 9000 [email protected]
italy +39 0332 42111 [email protected]
Japan +81 (0)463 55 3615 [email protected]
Korea +82 (0) 31 764 6711 [email protected]
Luxembourg +352 40 46 401 [email protected]
netherlands +31 (0) 20 605 4570 [email protected]
norway +47 224 32927 [email protected]
russia +7 (8) 31 713 1811 [email protected]
singapore +65 677 36238 [email protected]
south Africa +27 (0) 11 655 7030 [email protected]
spain +34 902 133 240 [email protected]
sweden +46 (0) 31 680 060 [email protected]
switzerland +41 (0) 71 394 5010 [email protected]
united Kingdom +44 (0) 168 429 6600 [email protected]
usA +1 716 652 2000 [email protected]
