HIGH SPEED SPINDLE SPEEDER - Nikken 8.0 1.75~16 1.75~10 0.5~8.0 L 153 153 149 162.5 192 ......
Transcript of HIGH SPEED SPINDLE SPEEDER - Nikken 8.0 1.75~16 1.75~10 0.5~8.0 L 153 153 149 162.5 192 ......
BT40 1605
Shank
Ratio
Length
NX : 4times, 5 timesPX : 6times, 10 times
Explanation of the Code No.NX
SK Collet
ℓ
Within 10microns
4D
�D
H
�C1
�C�D
L
�d
�14.520.5
ℓ
�C
�D
L
�C1
H
L
H
W
L
H
No.40
No.50
No.30TAPER Code No.
55
60
82
H
32
14.5
46
14.5
27.5
22
C
4027.5
22
Collet
SK10A
ETS14
SK16ASK10A
ETS14
D
1.75~10
0.5~8.0
1.75~161.75~10
0.5~8.0
L
153153149
162.5192151142
155.5
610
5
Ratio
456
10
Weight (kg)
2.95.04.14.5
11.07.06.87.2
20,000
40,00030,000
MAX. min-1
10,00020,00030,00040,000
7698
85
C1
118857698
BT30-NX 5-153BT40-NX 5-153
-PX 6-150GX-PX10-160GX
BT50-NX 4-192-NX 5-151-PX 6-140GX-PX10-155GX
No.40No.50
No.30
TAPER Code No.
148152140146
L
13.9
C
55406082
H
49
C1
150,000
Fixed min-1
15
Collet
CHA-□(Internal dia.)
D
0.5~4
Weight (kg)
2.72.73.26.0
BT30-HTS1500-148-HTS1500-152B
BT40-HTS1500-140BT50-HTS1500-146
(IT40)
(IT40)
(IT50)
(IT50)
NX
10,000~40,000min-1
HTS
150,000min-1Run-out Accuracy ofthe Spindle: Within 1µmAir Pressure, Comsumption:0.5MPa, 90Nl/min.Collet Size : MAX �4.0mm
PX
ETS Collet
★�d=0.5~1.0: Each 0.1mm (Gripping range : 0.1mm)e.g. ETS14-0.5 : 0.4~0.5mm
★�d=1.25~2.5: Each 0.25mm (Gripping range : 0.25mm)★�d=3.0 ~8.0: Each 0.5mm (Gripping range : 0.5mm)
ETS
Symbol of ETS Collet
MAX. Chucking Dia.Style No.
Explanation of the Code No.14 0.5
AL-0304L×W×H300×120×220
★Collet CHA-4.0 and spanner are suplied as standard.★Air line kit (AL-0304/AL-951) , the lubrication oil (K-211)
and the stopper block are available as an option.
★The collet which internal dia. excepts �4.0mm is available as an option.CHA-2.35, 3.0, 3.175The internal dia. range is each 0.1mm incremental from �0.5 to �4.0mm.
Air Cylinder for Cooling with ON/OFF MagnetNXE-COOLThe best cooling is to cool the speeder body directly.
HSK shank is also available.HSK 50A-HTS1500-158HSK 63A-HTS1500-160HSK100A-HTS1500-167
AL-951 (DC24V ON/OFF)L×H490×320
NX type★For End Mill, please use SK A type collet. For Drill, please use SK-P class collet. P.39★Wrench, Collet Extractor and A type SK Collets are supplied as standard.
NX5: SK10-6A, 8A, 10A NX4: SK16-8A, 10A, 12A, 16A★Stopper block is available as an option. When ordering, please inform your M/C maker
and Model as well as your M/C spindle flange dimension.★Air Clyinder for Cooling (NXE-COOL) is highly recommended to use for the stable milling.
PX type★Grease lubrication is standard.★Please add “MX” instead of “GX” at the end
of Code No. for the oil mist lubrication.e.g. BT40-PX6-130MX★ETS collet is supplies as an option.
140Nominal Gauge Length
BT40
Shank No.
1500
150,000min-1
Explanation of the Code No.
Symbol of Air Turbine Spindle
HTS
Please do not rotatethe machine spindle.
NIKKEN NX increases the spindle speed by 4 or 5 times, so economically convert your standard M/C to high speed M/C.
Inside gears are mirror-finish ground by NIKKEN original Fluid-Dynamic Grinding Process.
Run-out accuracy is more stable due toTiN Bearing Nut (standard accessory).
BT
HIGH SPEED SPINDLE SPEEDER
AIR TURBINE SPINDLE TOOL
112