High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C....
-
Upload
edgar-norton -
Category
Documents
-
view
215 -
download
0
Transcript of High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C....
![Page 1: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/1.jpg)
2010-01-2247
High-Speed Microscopic Imaging of theInitial Stage of Diesel Spray Formation and
Primary Breakup
C. Crua, T. Shoba, M. Heikal, University of Brighton
M. Gold, C. Higham, BP Global Fuels Technology
![Page 2: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/2.jpg)
2010-01-2247
Research objectives
Improve understanding of:
• Initial stage of diesel spray formation
• Breakup mechanisms of jet and ligaments
2
![Page 3: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/3.jpg)
2010-01-2247
Optical diagnostic technique
Techniques considered:
• High-speed video Resolution too coarse
• Doppler anemometry Slow; Dispersed spherical droplets only
• Long-range microscopic imaging Lighting is difficult
3
![Page 4: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/4.jpg)
2010-01-2247
Microscopic imaging of diesel sprays
4
Roisman, Araneo, Tropea (2007)
Badock, Wirth, Fath, Leipertz (1999) Heimgärtner , Leipertz (2000)
Bae, Kang (2005)
![Page 5: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/5.jpg)
2010-01-2247
5
Technique development
Flood light Pulsed laser(~ 6 ns)
Spark light(~ 500 ns)
Laser + diffuser(~ 20ns)
• Flood lights: Motion blurring, not enough light
• Spark light: Short exposure but still some motion blurring
• Pulsed laser: Short exposure but speckling artefact
• Pulsed laser + diffuser: Non-homogeneous scattering
• Pulsed laser + diffuser + shadowgraphy: Correct exposure
![Page 6: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/6.jpg)
2010-01-2247
Static diesel spray rig
• Ambient pressure & temperature
• Quiescent air motion
• Allows to develop experiments off engine
Non-evaporative test conditions
6
![Page 7: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/7.jpg)
2010-01-2247
Simultaneous micro & macroscopic imaging
7
Light source
Camera
Microscope
Camera
![Page 8: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/8.jpg)
2010-01-2247
Spray microscopy test conditions
• Field of view: 768 x 614 µm (1280 x 1024 pixels)
• Injection pressures: 400, 1000, 1600 bar
• Ambient pressure: atm
• Spatial locations: 0 to 5 mm in 0.5 mm increments
6 to 30 mm in 4 mm increments
8
![Page 9: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/9.jpg)
2010-01-2247
9
Initial stage of diesel spray formation
Spheroidal cap Surface ripplesStagnation point
VCO Delphi DFI1.3, Pinj = 400 bar, ICP = 1 atm, exp = 20ns, 0.600 µm/pix
135 µm
Spheroidal cap
![Page 10: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/10.jpg)
2010-01-2247
Initial stage of diesel spray formation
10Pinj = 400 bar, ICP = 1 atm, exp = 20ns, 0.600 µm/pix
![Page 11: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/11.jpg)
2010-01-2247
11
Ligament formation and primary breakup0.5 – 1.0 mm from nozzle
Pinj = 400 bar, ICP = 1 atm, exp = 20ns, 0.600 µm/pix
![Page 12: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/12.jpg)
2010-01-2247
12
Ligament formation and primary breakup1.0 – 1.5 mm from nozzle
Pinj = 400 bar, ICP = 1 atm, exp = 20ns, 0.600 µm/pix
![Page 13: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/13.jpg)
2010-01-2247
18.5mm downstream
200µs later
13
![Page 14: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/14.jpg)
2010-01-2247
Ligaments ahead of the jet
14
Roisman, Araneo, Tropea (2007)
![Page 15: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/15.jpg)
2010-01-2247
Questions arising
15
• Temporal evolution of initial jet?
• Origin of ligaments ahead of jet?
• Breakup mechanisms within initial 1 mm?
![Page 16: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/16.jpg)
2010-01-2247
Ultra high-speed micro & macroscopic video
16
u-HS camera
Light source
Microscope
HS camera
200 million fps, 5ns exp,1280x960 pixels
16 frames, intensified100k fps, 1µs exp,
200x60 pixelsNon-intensified
![Page 17: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/17.jpg)
2010-01-2247
Rapid Compression Machine – Ricardo Proteus
• 4, 6, 8 MPa pressure at TDC
• Up to 200 MPa fuel injection pressure
• 540 K estimated temperature at TDC
• Operated at 500 rpm
• Quiescent air motion at start of injection (no swirl)
Evaporative test conditions
17
![Page 18: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/18.jpg)
2010-01-2247
Central ligament ahead of the spray
18
995 µm
746 µm
Pinj = 400 bar, ICP = 40 bar, exp = 20ns, dt = 2µs, 0.777 µm/pix
Spheroidal cap is translucent Vapour phase Residual fuelJet and central ligament are opaque Liquid phase Fresh fuelLigament penetrates faster than jet Less resistance along centreline
![Page 19: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/19.jpg)
2010-01-2247
Central ligament ahead of the spray
19Pinj = 400 bar, ICP = 40 bar, exp = 20ns, dt = 2µs, 0.777 µm/pix
995 µm
746 µm
![Page 20: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/20.jpg)
2010-01-2247
Ligaments ahead of the spray
20
127 µm~D
23 µm
D = 135 µm
Ligament
Spheroidal cap(residual fuel)
Jet (fresh fuel)
•Trapped fuel pushed out by fresh fuel
•Less resistance along centreline Vortex ring motion
•Surface ripples shear layer
Corolla
![Page 21: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/21.jpg)
2010-01-2247
Effect of spheroidal cap on jet velocity
21
395 400 405 410 415 420 425 430 4350
100
200
300
400
500
600
700
Drop Perforating jet Continuous jet
Time (µs)
Pen
etra
tion
leng
th (
µm
)
Jet: 44 m/s
36 m/s
Cap: 14 m/s
Jet without cap22 m/s
Pinj = 400 bar, ICP = 80 bar, exp = 40ns, dt = 2µs, 0.777 µm/pix
![Page 22: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/22.jpg)
2010-01-2247
Breakup mechanisms within initial 1 mm
22Pinj = 400 bar, ICP = 1 atm, exp = 40ns, dt = 5µs, 0.777µm/pix
Instability Sheet Ligament Droplets
![Page 23: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/23.jpg)
2010-01-2247
Breakup mechanisms within initial 1 mm
23Pinj = 400 bar, ICP = 1 atm, exp = 20ns, 0.600µm/pix
Instability Sheet Ligament Droplets
![Page 24: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/24.jpg)
2010-01-2247
Further developments
24
Ultra-high speed drop size & velocity?
® Need: - Higher resolution (non-intensified) images
- Higher magnification factor
![Page 25: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/25.jpg)
2010-01-2247
Double-shot microscopic imaging samples
25
337 µm
446 µm
VCO, Pinj = 400 bar, ICP = 40 bar, exp = 20ns, dt = 0.5µs, 324nm/pix
Confirms vortex ring motion in the vaporised fuel
![Page 26: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/26.jpg)
2010-01-2247
Double-shot microscopic imaging samples
26
337 µm
446 µm
Pinj = 1000 bar, ICP = 40 bar, exp = 20ns, dt = 0.5µs, 324nm/pix
Vaporised trapped fuel with sac-type Delphi DFI 1.5, 1000 bar
![Page 27: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/27.jpg)
2010-01-2247
10.5 – 11.0mm 18.5 – 19.0mm
27
Spray centre Spray centreSpray periphery
Next step: Droplet sizing
Spherical droplets represent a small proportion of fuel volume
![Page 28: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/28.jpg)
2010-01-2247
Next step: Droplet sizing
28
Further work:
• Particle tracking for single droplet velocity and size
![Page 29: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/29.jpg)
2010-01-2247
Conclusions
Spray formation• Residual fuel remains in the nozzle orifice between injections
(VCO and sac-type nozzles, latest injector generation)
• Trapped fuel affects the dynamics of spray formation
(evaporative and non-evaporative conditions)
• Degradation of residual fuel internal deposit
Breakup mechanisms• Breakup processes observed & described near nozzle
• Spherical droplets represent a small proportion of total fuel volume
(need techniques for aspherical droplet sizing and velocimetry)
29
![Page 30: High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup C. Crua, T. Shoba, M. Heikal, University of Brighton.](https://reader035.fdocuments.net/reader035/viewer/2022062518/56649cef5503460f949bd5c6/html5/thumbnails/30.jpg)
2010-01-2247
High-Speed Microscopic Imaging of theInitial Stage of Diesel Spray Formation and
Primary Breakup
C. Crua, T. Shoba, M. Heikal, University of Brighton
M. Gold, C. Higham, BP Global Fuels Technology