HIGH SPEED DOORS GENERAL CATALOGUE · 2019-01-10 · an OdC TÜV ITALIA certified company ......
Transcript of HIGH SPEED DOORS GENERAL CATALOGUE · 2019-01-10 · an OdC TÜV ITALIA certified company ......
HIGH SPEED DOORSGENERAL CATALOGUECAMPISA
CAMPISA srl an OdC TÜV ITALIA certified company
CAMPISA
LOADING BAYS EQUIPMENT, RECESSED LOADING BAYS FOR TEMPERATURE-CONTROLLED ENVIRONMENTS, DOCK HOUSES
SECTIONAL OVERHEAD DOORS, VERTICAL AND HORIZONTAL FIRE-RETARDANT DOORS, SPECIAL FOR ATEX ENVIRONMENTS, GAS-TIGHT AND SMOKE-TIGHT
HIGH SPEED DOORS, FOLDING DOORS, CONTROL AND SAFETY SYSTEMS
SINCE 1972, WE ARE A LEADING PRODUCER OF INDUSTRIAL AND COMMERCIAL CLOSURES.
ONE SUPPLIER, MANY SOLUTIONS.
2 HIGH SPEED DOORS GENERAL CATALOGUE
CAMPISA
Leonardo would surely approve.
COMPONENTSWe have innovative hydraulic
lifting systems for vertical sliding sectional overhead doors and
extremely high-quality products. We provide both complete
products and highly innovative single components.
TOTAL QUALITY MADE IN ITALYWe manufacture in Italy, with our
own specialised personnel using our own machinery and with
rigorous procedures to ensure perfect products.
ECOLOGY FIRSTWe are environmentally sensitive, producing products free of contaminants.
The curtain of our high speed doors is recyclable.
SAFETY FIRSTWe are able to provide, both
in Italy and abroad, high-level technical products and solutions
that fully comply with the most strict international standards, designed
to function and guarantee the highest standards of safety and performance.
BREAKAGE FREEOur products are so
reliable and robust that they never break!
RESPONSIBILITY & INNOVATION
We produce with the heart and the passion of the artisans,
but with our eyes and minds clearly focused on technology. Our patents are the proof of this.
500 years ago, Leonardo da Vinci worked at the court of Ludovico il Moro. He studied mechanics, bodies in motion,
the calibration of various technologies.
Today, in those same lands near Milan, where Leonardo's works and canals can still be seen, there is a company that for 50 years has had the same passion for mechanics
and motion, producing versatile technological systems.
We have studied the needs of those who use our products and have met them
with technological solutions and developments, we would dare to say, scientific.
HIGH SPEED DOORS GENERAL CATALOGUE 3
CAMPISA - SERVICES
CAMPISA - GLOBAL
INFORMATIONAnswers to all your [email protected]
AFTER-SALES SUPPORTThe service that resolves those few problems that may arise
PROJECT - ASSISTANTA point of reference, offering complete support for your design [email protected]
INSPECTIONSTo guarantee and certify the mandatory inspections of the equipment supplied
SALESWe are always available for all your commercial [email protected]
From its headquarters or through its distributors, CAMPISA provides top-quality materials and equipment throughout the world.
SERVICEFor the fast shipping of spare parts, even same [email protected]
4 HIGH SPEED DOORS GENERAL CATALOGUE
System Fold-up Roll-up Roll-up Roll-up Swing Vertical strips
Self-repairing Yes Yes Exempt Exempt
Maximum dimensions m (L x H)
7x7 standard12x12 special 4.8 x 4.8 4 x 4.5 6 x 5.4 3.4 x 4 Without limits
Standard speedSpeed with Inverter m/s
0.7 – 0.8Up to 2
0.7 – 0.8Up to 2
0.7 – 0.8Up to 2
--Up to 2.5 -- --
Wind resistance *** ** * ** * *Air tightness * ** ** *** * *Flame resistance (curtain) Class 2 Class 2 Class 2 Class 2
Class 1 Class 2 Class 2
For aggressive environments AISI 304 AISI 304 AISI 304 AISI 304
AISI 316 AISI 304 AISI 304
Insulated curtain and thermal insulation ** **
Up to 3.5 h * *** * *
INDUSTRY
Light industry *** *** * *** * **Heavy industry *** *** *** * *Metalworking *** *** *** ** *Electronics, Fabrics *** *** * *** ** **Chemical industry *** *** * *** * *Paper mills *** *** *** ** *Automotive *** *** * *** ** *LOGISTICS
Warehouse and logistics *** *** *** * *FOOD PRODUCT / PHARMACEUTICAL
Food product/pharmaceutical industries ** *** * *** * *Meat processing ** *** *** * *Fish processing – stainless steel *** *** * *TEMPERATURE-CONTROLLED ENVIRONMENTS
Cool ** *** *** *** *SERVICES
Hospitals ** *** *** *** *Airports ** *** *** *** *Supermarkets and services *** *** *** *** *** ***
Characteristics
Model
Sectors
Page
DOMINO EVOLUTION AVANTGARDE WING LINEAR
6 810 14 18 22 24
QUICK CHOICE GUIDE
Model features and areas of useCAMPISA has products and solutions to meet any requirement
HIGH SPEED DOORS GENERAL CATALOGUE 5
CAMPISA
Free-standing, particularly robust,
with curtain reinforced with steel profiles
Excellent wind resistanceFor internal and external use
and for large dimensions
Safe, reliable, long-lasting
Speed 0.7 m/s or up to 2 m/s with 230 V
Inverter to set speed, acceleration and braking
Also in stainless steel and/or with insulated curtain
• High speed door with high-resistance belt lifting wound on a modular shaft with a ball bearing for each lifting belt.
• Sendzimir galvanized sheet structure assembled without welding.
• In compliance with the EN 13241-1 Standard.
• Wireless safety rib as standard.
• Equipped with reinforcement pipes in variable quantity and dimensions based on the size of the opening and required wind resistance. This type of execution makes it possible to achieve large dimensions with excellent wind-pressure resistance, making this door particularly suitable for the installation in external areas of buildings.
POCKET smart
5 good reasons to choose
POCKET smart
Main characteristics
1
2
3
4
5
6 HIGH SPEED DOORS GENERAL CATALOGUE POCKET smart
CAMPISA srl an OdC TÜV ITALIA certified company
Structure
• Sendzimir galvanised steel structure with anti-noise brushes on the upright frames.
• Curtain made of anti-tear polyester coated with PVC 700 g/m2.
• Horizontal reinforcing pipes that ensure an excellent wind resistance.
• First row of transparent PVC windows positioned at safety height, with the central point between 1060 and 1360 mm from the ground, based on the height of the sectors and reinforcement pipes.
Wind resistance
• The high speed POCKET smart door is ideal for openings that require strong wind resistance. It can be provided with resistance up to over 200 km/h, based on the size of the door.
• Wind resistance, according to the EN 12424 classification, shown in the chart.
Motor gear
• Compact motor gear with electromechanical brake, 400 V three-phase, 50Hz, 0.55 kW, minimum IP54 with electronic programmer and three-phase power supply connection plug.
• The largest doors have more powerful motor gears and controls, 1.1 kW or 2 kW, or 2 motors.
• Crank device for complete emergency opening, to be inserted in the motor gear and operated from the ground.
Controls and safeties
• CE compliant controls, minimum IP54 protection pre-wired to the motor gear.
• Total open control (and also optional pedestrian for large doors).
• Possibility of automatic, step by step and dead man operating.
• Emergency button.
• Wireless safety rib incorporated in the lower part of the curtain, in compliance with the EN 12453.
• Separate polarised reflecting photocell, in compliance with the EN 12453 Standard.
Technical data
• Flame-spread classification: Class 2.
• EN 12424 wind-resistance classification: up to Class 3, based on requirements, see chart.
• Opening/closing speed: up to 0.7 m/s. Up to 2 m/s with inverter requiring 230 V single-phase power supply.
• Operating temperature: from -20°C to +50°C.
• Wide range of Similar RAL colours, as shown in the table
Beige 1013
Light blue 5012
Yellow 1021
Green 6026
Orange 2004
Grey 7040
Blue 5010
White 9010
Red 3002
Black 9005
Green 6026 Grey 7040Blue 5010
White 9010
• Colours available for high speed doors with insulated curtain
High speed fold-up door Particularly suitable for large openings and heavy winds
Standard door curtain colours
Standard configurations
1401301201101009080706050403020
2000
2500
3000
3500
4000
4500
5000
5500
6000
6500
7000
Win
d sp
eed
(km
/h)
Door width (mm)
T4
T3T2
CLASS 3
CLASS 2
CLASS 1
CLASS 0
REMARKS
The decision between the T2, T3 and T4 models must take into account the area in which the door will be installed and the wind speed to which it will be exposed.
Doors with greater wind resistance and with larger dimensions are available on request.
CAMPISA
HIGH SPEED DOORS GENERAL CATALOGUE POCKET smart 7
350
200
P
Door curtain windows conformation
• The standard door curtain includes a row of windows at around 1060 – 1360 mm from the ground.
• Many window options are available which, for this model, must be interrupted for the passage of the lifting belts and reinforcement pipes.
REMARKSP = Step between reinforcement pipes, varying with
door height
Open control Reflective polarized light photocell
Optional features
• AISI 304 stainless steel structure.
• Motor gear protective cover (only for side motor gears).
• Closing frame for the installations inside the opening (remark: the frame may be necessary on the two sides).
• Inverter to adjust speed, acceleration and braking, complete with stroke counter.
• Supplementary wireless open control.
• Supplementary controls and safety features.
• Front motor for installation without side clearances.
• Additional windows.
• Insulated curtain.
• Screen or digital printing on the curtain.
Maximum dimensions
• Maximum dimensions as per price list: maximum width 7000 mm, maximum height 7000 mm.
• Larger dimensions up to 12 x 12 m off price list, available on request.
Certification
• Constructed in compliance with the EN 13241-1 Product Standard. CE marked.
Laef composition with windows
LL <2500 <5000 ≤7000
No. windows 1 2 3
High speed fold-up door Particularly suitable for large openings and heavy winds
POCKET smart
8 HIGH SPEED DOORS GENERAL CATALOGUE POCKET smart
Applications
• POCKET smart can be installed “outside the opening” or “inside the opening”.
• Requires free space to the right and left of the door, as shown in the diagram below, with the motor gear to the left of the high speed door.
• The free space for the motor gear is only required on the side where it is mounted – on the left, if not otherwise specified.
• The diagram also shows the necessary lintel height for the crosspiece and the folds of the open door.
• It also indicates the two assembly sections, with side motor gear and front motor gear for installations inside the opening.
LL = Required passage width
200150
Required space for assembly
160 160
515
AT =
800
/ 10
00240
350
640/
840
160
HL
= R
equi
red
pass
age
heig
ht
50
Optional Cover
1060
÷ 13
60
LL = Required passage width = LV - 370160 160
AT =
800
/100
0
240
640/
840
HL =
Req
uire
d pa
ssag
e he
ight
= H
V-21
0-(6
40/8
40)
50
1060
÷ 13
60
310
430
LV = Opening Width
25 25
HV
= O
peni
ng H
eigh
t
160
www.campisa.it [email protected]
CAMPISA
HIGH SPEED DOORS GENERAL CATALOGUE POCKET smart 9
Refer to the PSP-SR000 and PSPF-SR000 survey forms for the complete definition of the clearances.
“Outside the opening” installations
“Inside the opening” installations
DOMINO smart
Free-standing, very robust, with curtain reinforced
with steel profiles
Excellent wind resistanceFor internal and external use
Safe, reliable, long-lasting
Speed 0.8 m/s or up to 2 m/s with 230 V
Inverter to set speed, acceleration and braking
Also in stainless steel and/or with insulated curtain
5 good reasons to choose
DOMINO smart
1
2
3
4
5
• Robust high speed lifting door made with sendzimir galvanized sheets assembled without welding and with curtain reinforced with horizontal steel bars.
• In compliance with EN 13241-1 Standard.
• Wireless safety rib as standard.
• Offers an excellent wind resistance combined with good resistance at the vertical sliding points thanks to the special brushes installed as standard on the upright frames.
Main characteristics
10 HIGH SPEED DOORS GENERAL CATALOGUE DOMINO smart
CAMPISA srl an OdC TÜV ITALIA certified company
CAMPISA High speed roll-up door also for food-processing environments
Structure
• Galvanised steel structure with sealing and noise-reducing brushes on the upright frames.
• Curtain made of anti-tear polyester coated with PVC 700 g/m2.
• Horizontal reinforcing pipes that ensure an excellent wind resistance.
• A transparent PVC segment positioned at safety height (around 1500 mm from the ground).
Wind resistance
• The DOMINO high speed door has an excellent wind resistance, thanks to metal support profiles, inserted within the curtain.
• Wind resistance, according to the EN 12424 classification, shown in the chart.
Motor gear
• Compact motor gear with electromechanical brake, 400 V three-phase, 50Hz, from 0.55 to 1.1 kW (based on door dimensions), minimum IP54 with electronic programmer and three-phase power supply connection plug.
• Crank device for complete emergency opening, to be inserted in the motor gear and operated from the ground.
Controls and safeties
• CE compliant controls, minimum IP54 protection pre-wired to the motor gear.
• Total open control (and also pedestrian for large doors).
• Possibility of automatic, step by step and dead man operating.
• Emergency button.
• Wireless safety rib incorporated in the lower part of the curtain, in compliance with the EN 12453 Standard.
• Separate polarised reflecting photocell, in compliance with the EN 12453 Standard.
Technical data
• Flame-spread classification: Class 2.
• Wind-resistance classification: up to Class 1, based on dimensions, see chart.
• Opening/closing speed: up to 0.8 m/s. Up to 2 m/s with inverter requiring 230 V single-phase power supply.
• Operating temperature: from -20°C to +50°C.
Standard configurations
HIGH SPEED DOORS GENERAL CATALOGUE DOMINO smart 11
100
90
80
70
60
50
40
30
20
2000
2500
3000
3500
4000
4500
4800
Win
d sp
eed
(km
/h)
Door width (mm)
CLASS 0
CLASS 1 REMARKS
Door includes brushes along the perimeter to limit the passage of air.
Suitable for internal and external use according to the characteristics required for the environment.
• Wide range of Similar RAL colours, as shown in the table
Beige 1013 Yellow 1021
Green 6026
Orange 2004
Grey 7040
Blue 5010
White 9010
Red 3002
Black 9005
Green 6026 Grey 7040Blue 5010
White 9010
• Colours available for high speed doors with insulated curtain
Standard door curtain colours
Light blue 5012
Door curtain windows conformation
• The standard door curtain includes a row of windows at around 1500 mm from the ground.
• Additional optional windows are available.
Optional features
• AISI 304 stainless steel structure.
• Motor gear protective cover (only for side motor gears).
• Closing frame for the installations inside the opening (remark: consider one or both sides).
• Inverter for programmables speeds with departure and arrival ramps and stroke counter, requires 230 V single-phase power supply.
• Supplementary wireless open control.
• Supplementary controls and safety features.
• Front motor for installation without side clearances.
• Additional windows.
• Insulated curtain.
• Screen or digital printing on the curtain.
Maximum dimensions
• Maximum dimensions possible: maximum width 4800 mm, maximum height 4800 mm.
Certification
• Constructed in compliance with the EN 13241-1 Product Standard. CE marked.
High speed roll-up door also for food-processing environments
DOMINO smart
12 HIGH SPEED DOORS GENERAL CATALOGUE DOMINO smart
Curtain composition with windows
LL ≤4800
No. 1 window, full width
250
800
800
800
800
800
Motor gear protective cover (optional) Reflective polarized light photocell (polarising mirror detail)
Applications
• DOMINO smart can be installed “outside the opening” or “inside the opening”.
• Requires free space to the right and left of the door, as shown in the diagram below, with the motor gear positioned on the left. Its clearance will be required only on the side where it is mounted – on the left, if not otherwise specified.
• The drawing also shows the necessary lintel height for the crossbeam and the portion of the curtain which does not re-enter, of particularly compact dimensions.
• It also shows the two mounting sections, with side motor gear and front motor gear for installations inside the light.
www.campisa.it [email protected]
CAMPISA
HIGH SPEED DOORS GENERAL CATALOGUE DOMINO smart 13
160 LL = Required passage width 160
350
HL
= R
equi
red
pass
age
heig
ht
22050
AT =
500
200360
150
Required space for assembly
550
150
Optional Cover
1500
160 LL = Required passage width = LV - 370 160
350
HL
= R
equi
red
pass
age
heig
ht =
HV-
550
220
50AT
= 5
00 15
0
680LV = Opening Width
25 25
HV
= O
peni
ng H
eigh
t
Refer to the PSD-SR000 and PSDF-SR000 survey forms for the complete definition of the clearances.
“Outside the opening” installations
“Inside the opening” installations
EVOLUTION
Simple, economical, self-repairing high speed door, reinforced curtain with fibreglass profiles
Long-lasting, for internal entrances with high traffic
or intense use
Secure, reliable and robust, with special aluminium
upright frames
Speed 0.8 m/s, up to 2.5 m/s with optional
Inverter to set speed, acceleration and braking
Also in stainless steel and/or with insulated curtain
• EVOLUTION is an economical solution for all high-traffic internal entrances. In compliance with the EN 13241-1 Standard. Self-repairing and long-lasting, made with special aluminium upright frames, sendzimir galvanized sheets and anti-tear polyester fabric curtain coated with PVC 700 g/m2.
• The curtain, reinforced with transversal fibreglass bars guided in the side aluminium upright frames, provides an excellent wind resistance. The fibreglass profiles are always under tension between the two upright frames in which they slide. The sliding system, featuring brushes, makes it possible to achieve a good air tightness and avoid thermal dispersion, with insulation between inside and outside.
• EVOLUTION is self-repairing and economical: if bumped, it comes out of the side rails and re-enters after it lifts up, minimising the repair costs.
• Safety rib unnecessary according to risk evaluation, since the pressure of the edge is less than what is permitted under the EN 12453.
• EVOLUTION can only be mounted “outside the opening”.
5 good reasons to choose
EVOLUTION
Main characteristics
1
2
3
4
5
14 HIGH SPEED DOORS GENERAL CATALOGUE EVOLUTION
SELF-REPAIRING
Can be installed with motor gear protective cover (optional) and control panel with INVERTER (optional)
CAMPISA srl an OdC TÜV ITALIA certified company
CAMPISA High speed SELF-REPAIRING roll-up door Ideal for internal use
Structure
• Sendzimir galvanized steel structure with curtain rail within two aluminium upright frames.
• Curtain made of anti-tear polyester coated with PVC 700 g/m2, reinforced with flexible bars and with a patented wind-resistance and self-repairing system.
• A row of transparent windows in PVC positioned at safety height (around 1500 mm from the ground).
Wind resistance
• The EVOLUTION high speed door is conceived for internal use, with good suction resistance.
• Wind resistance, according to the EN 12424 classification, shown in the chart.
Motor gear
• Compact motor gear with electromechanical brake, 400 V three-phase, 50Hz, 0.55 kW, with electronic programmer and three-phase power supply connection plug.
• Crank device for complete emergency opening, to be inserted in the motor gear and operated from the ground.
Controls and safeties
• Control logic including remote-control receiver built into the motor gear, IP54 protection rating. Open-close-stop push buttons, IP65 protection rating.
• Possibility of automatic, step by step and dead man operating.
• Curtain anti-overlap photocell with auto-test in the crossbeam, in compliance with EN 12453 Standard.
Technical data
• Flame-spread classification: Class 2.
• Wind-resistance classification: up to 85 Km/h, Class 1, see chart.
• Opening/closing speed: up to 0.8 m/s. Up to 2 m/s with inverter requiring 230 V single-phase power supply.
• Operating temperature: from -20°C to +50°C.
Standard configurations
HIGH SPEED DOORS GENERAL CATALOGUE EVOLUTION 15
90
80
70
60
50
40
30
20
2000
2500
3000
3500
4000
4500
Win
d sp
eed
(km
/h)
Door width (mm)
CLASS 0
CLASS 1 REMARKS
In the event of strong gusts of wind, the curtain comes out from the containment brushes and is held in position by the fibreglass reinforcement bars.
Suitable for internal and external use according to the characteristics required for the environment.
• Wide range of Similar RAL colours, as shown in the table
Beige 1013 Yellow 1021
Green 6026
Orange 2004
Grey 7040
Blue 5010
White 9010
Red 3002
Black 9005
Green 6026 Grey 7040Blue 5010
White 9010
• Colours available for high speed doors with insulated curtain
Standard door curtain colours
Light blue 5012
Door curtain windows conformation
• The standard door curtain includes a row of windows at around 1500 mm from the ground.
• Additional optional windows are available.
EVOLUTION High speed SELF-REPAIRING roll-up door Ideal for internal use
Optional features
• AISI 304 stainless steel support for the aluminium upright frames.
• Motor gear protective cover.
• Inverter to set speed, acceleration and brakes, with stroke counter, 230 V single-phase feeding.
• Supplementary wireless open controls.
• Supplementary controls and safety features.
• Additional windows.
• Screen or digital printing on the curtain.
Maximum dimensions
• Maximum dimensions possible: maximum width 4000 mm, maximum height 4500 mm.
Certification
• Constructed in compliance with the EN 13241-1 Product Standard. CE marked.
16 HIGH SPEED DOORS GENERAL CATALOGUE EVOLUTION
Curtain composition with windows
LL <1800 <2650 <3500 ≤4000
No. windows 1 2 3 4
250
770
770
770
770
770
Control panel with INVERTER (optional) Motor gear protective cover (optional)
Applications
• EVOLUTION can only be mounted “outside the opening”.
• Requires free space to the right and left of the door, as shown in the diagram below, where the free space for the motor gear is shown on the left. This space is only required on the side where it is mounted – on the left, if not otherwise specified.
• The drawing also shows the necessary lintel height for the crossbeam and the portion of the curtain which does not re-enter, of particularly compact dimensions.
• It is shown the mounting section with side motor gear.
www.campisa.it [email protected]
CAMPISA
HIGH SPEED DOORS GENERAL CATALOGUE EVOLUTION 17
315
190
160 LL = Required passage width 160
HL
= R
equi
red
pass
age
heig
ht
AT =
520
370
50
330
150 160
525
Required space for assembly
Optional Cover
1500
Refer to the PE-SR000 survey form for the complete definition of the clearances.
“Outside the opening” installations
AVANTGARDE
Continuous air tightness along the entire perimeter,
high wind resistance
Self-repairing, for internal and external use, secure,
reliable, robust and long-lasting
Best standard solution for high-traffic openings, with best
performance and long life
Speed up to 2.5 m/s, with Inverter and departure
and stop ramps
Also in stainless steel and/or with insulated curtain
• AVANTGARDE is the best standard solution for all high-traffic openings and environments, in compliance with the EN 13241-1 Standard.
• Self-repairing and long-lasting, made with sendzimir galvanized sheets and anti-tear polyester fabric curtain coated with PVC 900 g/m2. In compliance with the EN 12453 Standard.
• It does not require wind resistance reinforcement bars because the curtain remains in tension between the two side upright frames along which it slides, which ensure its tightness thanks to a continuous retention system. In addition, the sliding system offers an excellent thermal performance, with improved insulation between inside and outside.
• AVANTGARDE is self-repairing and convenient: in case of impact during its descent, it comes out of the side rails and re-enters after it lifts up, minimising the repair costs.
• The door curtain and windows can be personalised to customer requirements.
• Also available in AISI 304 or AISI 316 stainless steel and/or with insulated curtain.
5 good reasons to choose
AVANTGARDE
Main characteristics
1
2
3
4
5
18 HIGH SPEED DOORS GENERAL CATALOGUE AVANTGARDE
SELF-REPAIRING
Standard INVERTER
CAMPISA srl an OdC TÜV ITALIA certified company
CAMPISA High speed SELF-REPAIRING roll-up door TOP OF THE RANGE – Also for food-processing environments
Structure
• Sendzimir galvanized steel structure with high density polizene curtain rail in the upright frames and zip side retention system.
• Curtain made of anti-tear polyester fabric coated with PVC 900 g/m2.
• Transparent PVC or wire-glass window sections. First row of transparent windows positioned at safety height (around 1500 mm from the ground).
Wind resistance
• The AVANTGARDE high speed door is highly recommended for its excellent wind resistance, and, above all, for its overall tightness along the entire surface, given that the curtain is sealed around the entire perimeter, particularly at the sides.
• Wind resistance, according to the EN 12424 classification, shown in the chart.
Motor gear
• Motor gear with electromechanical brake and electronic programmer, 230 V single-phase power supply. Electronic programmer with INVERTER to control and manage opening/closing, set speed, acceleration and braking.
• Crank device for complete emergency opening, operated from the ground, to be inserted in the motor gear.
Controls and safeties
• IP55 protection control panel pre-wired to the motor gear, with total open control (and also pedestrian for large doors), and emergency switch.
• Automatic, step-by-step impulse or dead man operation available, stroke counter incorporated in the control logic.
• Wireless safety rib (optional) incorporated in the lower part of the curtain, in compliance with the EN 12453 Standard (remark: it makes the lower edge rigid).
• Separate pair of photocells, in compliance with the EN 12453 Standard.
• Curtain anti-overlap photocell with auto-test in the crosspiece, in compliance with the EN 12453 Standard.
Technical data
• Flame-spread classification: Class 2.
• Wind-resistance classification: up to Class 2, see chart.
• Water permeability: Class 2 EN 12425.
• Opening/closing speed: up to 2.5 m/s with Inverter.
• Operating temperatures: from -20°C to +50°C.
• Wide range of Similar RAL colours, as shown in the table
Blue 5010
White 9010
Grey 7038Green 6026
White 9010
• Colours available for high speed doors with insulated curtain
Standard door curtain colours
Standard configurations
HIGH SPEED DOORS GENERAL CATALOGUE AVANTGARDE 19
1201101009080706050403020
2000
2500
3000
3500
4000
4500
5000
5500
6000
CLASS 0
CLASS 1
CLASS 2
Win
d sp
eed
(km
/h)
Door width (mm)
REMARKS
Excellent wind and draught resistance.
Suitable for internal installation and for the perimeter of buildings.
Yellow 1003
Grey 7035
Beige 1013
Grey 7037
Orange 2004
Grey 7038
Red 3002
Black 9004
Blue 5010
Argento 9006
Light blue 5015
Door curtain windows conformation
• The standard door curtain includes a row of windows at around 1500 mm from the ground.
• Many window options are available, including for the entire height, but separate due to the vertical reinforcements on the curtain.
Optional features
• Structure covers painted in Similar RAL colour upon request.
• AISI 304 or 316 stainless steel structure.
• Electrical panel in AISI 304 stainless steel case.
• Front motor gear.
• Closing frame for the installations inside the opening (remark: the frame may be necessary on two sides).
• Total counterweight automatic reopening.
• Wireless safety rib incorporated in the lower part of the curtain.
• Additional controls and safety features.
• Additional windows.
• Insulated curtain.
• Screen or digital printing on the curtain.
Maximum dimensions
• Maximum dimensions possible: maximum width 6000 mm, maximum height 5400 mm.
Certification
• Constructed in compliance with the EN 13241-1 Product Standard. CE marked.
AVANTGARDE High speed SELF-REPAIRING roll-up door TOP OF THE RANGE – Also for food-processing environments
20 HIGH SPEED DOORS GENERAL CATALOGUE AVANTGARDE
400
400
800
850
300
500
~1000
500
Curtain composition with windows
LL <1000 <2000 <4000 <5000 ≤6000
No. windows 1 2 3 4 5
Curtain composition with rectangular window sections
LL <1000 <2000 <4000 <5000 ≤6000
No. section 1 2 3 4 5
Control panel with INVERTER (standard) Motor gear protective cover (optional)
Applications
• AVANTGARDE can be installed “outside the opening” or “inside the opening”.
• Requires free space to the right and left of the door, as shown in the diagram below. In the diagram, the free space for the motor gear is shown on the left. This space is only required on the side where it is mounted – on the left, if not otherwise specified.
• The drawing also shows the necessary lintel height for the crossbeam and the portion of the curtain which does not re-enter, of particularly compact dimensions.
• It also shows the two mounting sections, with side motor gear and front motor gear for installations inside the light.
www.campisa.it [email protected]
CAMPISA
HIGH SPEED DOORS GENERAL CATALOGUE AVANTGARDE 21
125 LL = Required passage width 125
HL
= R
equi
red
pass
age
heig
ht
100
280/330 (*)
50
280/
330
(*)
200200
580
Required space for assembly
Optional Cover
1500
220
125 LL = Required passage width = LV - 300 125
HL
= R
equi
red
pass
age
heig
ht =
HV-
270-
(280
/330
)
100
380/430
50
280/
330
580
1500
LV = Opening Width
25 25
220
HV
= O
peni
ng H
eigh
t
200
Refer to the PA-SR000 and PAL-SR000 survey forms for the complete definition of the clearances.
(*) 280 mm for doors with width <4750 mm and height <4400 mm
(*) 330 mm for doors with width ≥4750 mm and height ≥4400 mm
“Outside the opening” installations
“Inside the opening” installations
WING / WING FRIGO
The most economical solution for limited
internal requirements
For small size commercial or industrial openings
Safe, reliable, robust and long-lasting
Manual with spring return or motorised with
compressed air
Also available in stainless steel and with PVC panel
for low temperatures
• WING is a practical flexible swing door, made with a galvanised steel structure, with a self-extinguishing transparent PVC panel, either 5 or 7 mm thick (based on the dimensions), suitably reinforced in the locations of highest stress, with spring reclosing system and fastening plates with ball bearings.
• Wing is also available in AISI 304 stainless steel with transparent PVC panel for low temperatures (-35°C).
5 good reasons to choose
WING
Main characteristics
1
2
3
4
5
22 HIGH SPEED DOORS GENERAL CATALOGUE WING - WING FRIGO
CAMPISA srl an OdC TÜV ITALIA certified company
CAMPISA Hinged swing doors The most economical solution
Manual
• The door opens in both directions by pushing and has a spring reclosing system.
Semiautomatic
• The door opens pneumatically by means of two cylinders as soon as it is pushed in either direction. It always opens in the direction of the push.
• It requires compressed air at 4 bar.
Automatic
• The door opens pneumatically by means of two cylinders controlled remotely by any type of remote control or manual control connected to it.
• It only opens in one direction.
• Power supply: 220 V single-phase, 0,5 A.
• It requires compressed air at 4 bar.
Optional features
• AISI 304 stainless steel metal structure.
• Wainscotings and head sections in opaque coloured PVC, 9 mm thick.
Maximum dimensions possible Certification
• Constructed in compliance with the EN 13241-1 Product Standards. CE marked.
Versions available
HIGH SPEED DOORS GENERAL CATALOGUE WING - WING FRIGO 23
Model Max L m Max H m
Wing5 4 4.5
Wing7 4 4.5
Wing Frigo 3 3.5
Wing Inox 3.2 3.5
Wing Inox Frigo 3.2 3.5
LINEAR
The most economical solution to separate
workplaces
Easy crossing anywhere, perfectly transparent,
dimensions that adapt to all conditions
Suitable for the creation of protected environments
(e.g. painting, grinding)
Extremely simple installation, for suspension
Also available in stainless steel and with PVC strips
for low temperatures
• Linear doors are doors with vertical strips, fixed or sliding, made of transparent PVC.
• They allow work areas to be separated simply and economically, allowing for easy and fast passage at any point while maintaining complete transparency.
• The screening of passageways with Linear limits thermal dispersions and/or acoustic emissions.
• The support is made of galvanised steel with a rapid fasten/unfasten system of the strips.
• The strips are made of transparent extruded PVC for both normal- and low-temperature environments.
5 good reasons to choose
LINEAR
Main characteristics
1
2
3
4
5
24 HIGH SPEED DOORS GENERAL CATALOGUE LINEAR
CAMPISA srl an OdC TÜV ITALIA certified company
CAMPISA
Flexible closures using transparent vertical strips
Optional features
• AISI 304 stainless steel structure.
Certification
• Constructed in compliance with the EN 13241-1 Product Standard. CE marked.
Upper support
• 180° oscillating with ends for fastening to the lintel or the wall available in galvanised steel or AISI 304 stainless steel.
Flexible strips
• Made of transparent extruded PVC for both normal- and low-temperature environments (down to -25°). Upon request, opaque coloured PVC strips are available for special applications (anti-UV barriers to avoid the passage of sunlight) partial or total overlap of the strips.
HIGH SPEED DOORS GENERAL CATALOGUE LINEAR 25
26 HIGH SPEED DOORS GENERAL CATALOGUE ACCESSORI
Key selector
Chain switch and chain support bar
Mushroom door palm pushbutton
2-channel Rolling Code transmitter
Mushroom emergency stop pushbutton
Two-channel receiver for Rolling Code transmitters
Single loop metal detector
Two-button pushbuttonWireless one-button opening pushbutton
Microwave detecting radar, IP 54
Contactless manual control – sensor-based door opening
Weather-protective radar cover and fixing bracket
ACCESSORIES FOR HIGH SPEED DOORS
HIGH SPEED DOORS GENERAL CATALOGUE ACCESSORI 27
2-colour traffic-light system including control unit
Photocell with polarized light, with polarised mirror, 12 m range
Additional transformer for accessory power supply
Pair of infrared photocell (can also be used as open control)
4-channel Rolling Code transmitter
Stroke counter
Multipoint photocell barrier with support
6-channel Rolling Code transmitter
Aluminium anti-vandalism photocell protection
Wireless safety rib to protect lower edge
Flashing yellow light
CAMPISA
CAMPISA srl 13, via Ruffini 20037 Palazzolo Milanese (MI) Italy Tel. +39 02 9903971 r.a. - Fax +39 02 99044351 www.campisa.it e-mail: [email protected]
CAMPISAthe certainly of a sure choice
C.E
NG
.PR0
116
CAMPISA
Your local specialist
Repr
oduc
tion
is p
rohi
bite
d, e
ven
part
ial.
We
rese
rve
the
right
to m
ake
chan
ges
with
out p
rior
not
ifica
tion.
All
the
info
rmat
ion
in t
his
cata
logu
e ha
s be
en c
aref
ully
pre
pare
d an
d
repr
esen
ts t
he s
tate
of t
he a
rt. S
ome
refe
renc
es m
ay b
ecom
e ou
t of d
ate.
All
cont
ent a
nd d
escr
iptio
ns a
re s
ubje
ct to
gen
eral
and
spe
cial
sal
es c
laus
es.