High Quality Steel BuildingsAug 10, 2019 · Our buildings meet the highest level of building...
Transcript of High Quality Steel BuildingsAug 10, 2019 · Our buildings meet the highest level of building...
High Quality Steel BuildingsRaising Industry Standards For Over 45 Years!
SUNWARD STEEL BUILDINGSSunward Steel Buildings was established in 1972 and has been manufacturing and supplying su-perior steel buildings of all types ever since. We have delivered over 50,000 buildings worldwide and treat every customer with honesty and integrity. We own and operate 3 large full service manufacturing facilities.
Our 2 Wedgcor factories are located in Jamestown, ND while our factory, Rockford is located in Walterboro, SC. Sunward’s corporate headquarters is located in Denver, CO.
We hold several accreditations including IAS, which provides evidence that an organization operates at the highest level of ethical, legal, and technical standards. Our buildings meet the highest level of building manufacturing standards.
EXCLUSIVE SEAL TIGHT FEATURES
Ten Star Features & Benefits Our Quality Standards Compared To Competitors
SIPHON GROOVE BASE TRIM
HIGH RIB SHEETING BASE ANGLE
DIE-FORMED RIDGE CAP MAIN FRAME COLUMNS & RAFTERS
6” SOFFIT TRIM SYSTEM (OPTIONAL) HIGH STRENGTH BRACING
PREMIUM FASTENERS UPGRADED CLOSURE SYSTEM
Allows the moisture to gather and siphon under the seam, helping to prevent the insulation from getting wet.
Included on ALL buildings, base trim covers the concrete sheeting notch providing a clean trimmed finish at the base of the building.
26 gauge with purlin bearing leg for ease on con-struction and High-Rib support.
G-90 galvanized 16 gauge angle protects the base of the sheeting and wall insulation.
Matching roof profile with Siphon Groove and purlin bearing leg that extends 18” on both sides.
55 KSI yield strength provides certified structural integrity strength.
Steel flashing and a formed closure that help pre-vents moisture from getting into insulation.
With overlapping purlin and girts, flange bracing, and heavy galvanized purlin bracing angle.
Rust and corrosion warranted with a special cupped head that prevents over drilling and pro-tects the washer from harmful UV rays.
Upgraded quality closed cell closures with pre-ap-plied adhesive for a secure fit to keep water, dust, and pests out.
Sunward’s Exclusive Seal Tight Features bring unmatched quality to our buildings. When in-stalled properly, our exclusive special building features help create a complete building system.
RIDGE CAPSOFFIT SYSTEM (OPTIONAL)
SHEETING NOTCH
FULL WRAP TRIM
BASE TRIM
CLOSURES AT EAVE
CLOSURES AT BASE
SIPHON GROOVE ON PANELS
STRUCTURAL INTEGRITY
1:12 ROOF PITCH 2:12 ROOF PITCH 3:12 ROOF PITCH
FRAMING OPTIONS
CORNERCOLUMN
COLUMN
GIRT
PURLIN ANGLE
RAFTER
PURLIN
4:12 ROOF PITCH
MULTI-SPAN
CLERESTORY
SINGLE SLOPE
MONITOR
GAMBREL
LEAN-TO
MULTI-STORY MEZZANINE
STRAIGHT COLUMN
Framed OpeningsWe provide structural framed openings for doors and windows. Our framed openings provide support for doors and windows and secure them to the building. This eliminates the need for wood framing and prevents the doors and windows from shaking when they open and close.
WALL SHEETINGPBR Panel with Siphon Groove At Sunward our High Rib PBR Panel is standard with an exclusive Siphon Groove. The Siphon Groove allows the moisture to gather and siphon under the seam, helping to prevent the insu-lation from getting wet. This is only available with Sunward manufactured products. Outsourced panels will not include a siphon groove.
The panels come standard in 26 gauge. 24 gauge is available in white and galvalume.
SIPHON GROOVE
PURLIN BEARING LEG
BASE TRIM
BASE ANGLE
CLOSURE SHEETING NOTCH
WALL PANEL
FASTENER
Architectural PanelArchitectural Panels offer an aesthetically pleasing look by reversing the panels to conceal the hardware. They are ideal and often used in buildings when the building owner is adhering to local city zoning requirements or looking for a different look.
The panels come standard in 26 gauge. 24 gauge is available in white and galvalume.
Panels without purlin bearing leg causes a gap between which compromises the seal
and creates leakage
ROOF SHEETINGHigh Rib PBR Panels are standard in metal building roofs. Our exclusive PBR Panels with Siphon Groove are a great choice for roof sheeting.
Standing seam roof panels are often used in buildings over 80′ wide providing uplift protec-tion in windy areas. At Sunward we use a variety of standing seam roof panel options based on building use and architectural specifications and requests. Pictured is a common standing seam roof panel. Separate tools or machinery are required to install standing seam roofs. Standing Seam Panels come standard in 24 gauge.
PBR Panel with Siphon Groove
Standing Seam Roof Panel
RIDGE CAP
EAVE SEALANT
EAVE CLOSURE
ROOF PANEL
COLORS
We have a wide variety of options that truly make your building beautiful and one-of-a-kind. Our color options run across not only the exterior of your building but are also incorporated into our trim packages and even down to the actual exterior screws.
Color Options
ASH GRAY
KOKO BROWN
BURNISHED SLATE
CHARCOAL GRAY
LIGHT STONE
HAWIIAN BLUE
SADDLE TAN
POLAR WHITE
HUNTER GREEN
RUSTIC RED
We offer up to a 40-year paint warranty on most colors!
WAINSCOT OPTIONSWainscot can be added to the exterior of any building to add color or contrast. Transition trim can be added to soften the transition between the two colors and dress up the look. There is a girt placed at the height of the wainscot. Wainscot is typically run at 4’, but can be customized to any height. Custom brick or stone finishes can be added to the wainscot for curb appeal.
TRANSITION TRIM
WAINSCOT GIRT
CLOSURESOur closed cell closures are upgraded quality. Adhesive is pre-applied to ensure proper position-ing of the closure and give a better fit. The strips interlock at the eave and base underneath the metal panels to help keep water, dust, air and pests out. The closure is an important component to our exclusive Seal Tight Building Features.
EAVE CLOSURE BASE CLOSURE
TRIMS
GABLE TRIM
BASE TRIM
WINDOW TRIM
CORNER TRIM
DOOR TRIM
DOWNSPOUT
EAVE TRIMOR GUTTER
TRANSITION TRIM
EAVE TRIM
FULL WRAPDOOR TRIM
FULL WRAP WINDOW TRIM
GABLE TRIM
CORNER TRIM
WINDOW TRIM
DOOR TRIMBASE TRIM
BASE TRIM
BASE TRIM
CLOSURE
GALVANIZEDBASE CHANNEL
(FOR LINER PANEL)GALVANIZEDBASE ANGLE
(STANDARD)
Gutter & Downspout
Base trim comes standard on all Sunward Steel buildings. Galvanized base angle helps prevent rust on the concrete. Galvanized base channel gives liner panel an interior attachment.
GUTTER & DOWNSPOUTSOFFIT TRIM
FASTENERSOur high quality, high strength, “Long Life” fasteners are red rust corrosion warranted and col-or matched to your building. They have a special cupped head that prevents over drilling and protects the washer from harmful UV rays. This fastener is a critical component in our Seal Tight Building System.
DOORSOur steel walk doors come standard as heavy 18 gauge , insulated and foam filled with a Poly-urethane core. Included with our doors are a lever lock and a sub-frame with full trim and clo-sure strips.
Overhead doors are available in various heights and widths to accommodate any size framed opening, and can be ordered with insulated or non-insulated options. Windows , track options, and weather stripping are available to customize your door.
Steel Walk Doors
Overhead Doors
CUSTOMIZATION OPTIONS
BUILDING WARRANTIES
Accessories can add a finishing touch to any prefabricated steel building. We supply the most common steel building accessories from doors, to vents, to metal building insulation, and every-thing in between. Sunward Steel works with name brand suppliers that have the experience and service capabilities to meet our customers’ needs.
Your Sunward building products are backed by warranty. We offer some of the most complete, limited warranties in the industry!
Follow Us On Social:
6800 E. Hampden Ave. Denver, CO [email protected](303) 758-4141