HigH PERFORMANCE MultiPuRPOsE MACHiNiNg CENtREs

HigH PERFORMANCE MultiPuRPOsE MACHiNiNg CENtREs

GB

High performance multipurpose machining centres

Breton multipurpose machining centres are specially conceived for high speed, high performance and high versatility.Architecture with gantry mobile bridge, Metalquartz structure and a wide range of powerful spindles are the main features of these centres.

High dynamic, high chip removal, excellent surface finish and outstanding machining accuracy are synonym of efficiency, quality and productivity.

With its full range of machines, Breton can satisfy Customers with the most complex and sophisticated machining requirements in the main industrial sectors such as aerospace, energy, automotive, mold and die and general mechanics.

XCEEDER / MiCRON

XCEEDER / MiCRON

5

Metalquartz®

XCEEDER 900 Rt / MiCRON XCEEDER 1200 Rt / MiCRON

Interpolated axes 5 5

X Strokemmin

90035.4

1.20047.2

Y Strokemmin

90035.4

1.00039.4

Z Strokemmin

60023.6

70027.6

X - Y Axes rapid feedratem/min

ipm60

2,36260

2,362

Z Axis rapid feedratem/min

ipm40

1,57540

1,575

A Axis rotation -30° ÷ +110° -30° ÷ +120°

C Axis rotation continuous continuous

A Axis rapid feedrate rpm 50 30

C Axis rapid feedrate rpm 100 60

Spindle power S6(40%) / S1kWHP

40/4053.6/53.6

oror

54/4072.4/53.6

oror

55/4073.8/53.6

85/74.6114/100

oror

54/4072.4/53.6

oror

55/4073.8/53.6

Spindle torque S6(40%) / S1Nmft-lb

137/100101/73.7

oror

70/5151.6/37.6

oror

22/1616.2/11.8

480/300354/221

oror

70/5151.6/37.6

oror

22/1616.2/11.8

Spindle speed rpm 18.000 or 28.000 or 40.000 14.000 or 28.000 or 40.000

High speed vertical machining centre, with 5 axes,for milling of small and medium size parts.

Range of materials: Superalloys (Titanium, Inconel etc), Steel and Aluminium.

ultRiX

ultRiX

7

ultRiX 800 Rt ultRiX 1000 Rt


X Strokemmin

80031.5

1.15045.2

Y Strokemmin

90035.4

1.00039.4

Z Strokemmin

60023.6

70027.6


ipm60

2,36260

2,362


ipm40

1,57540

1,575

A Axis rotation -30° ÷ +110° -30° ÷ +120°




MilliNg sPiNDlE:Spindle power S6(40%) / S1

kWHP

40/4053.6/53.6

oror

54/4072.4/53.6

oror

55/4073.8/53.6

85/74.6114/100

oror

54/4072.4/53.6

oror

55/4073.8/53.6


137/100101/73.7

oror

70/5151.6/37.6

oror

22/1616.2/11.8

480/300354/221

oror

70/5151.6/37.6

oror

22/1616.2/11.8

Spindle speed rpm 18.000 or 28.000 or 40.000 14.000 or 28.000 or 40.000

tuRNiNg sPiNDlE:Spindle power S6(40%) / S1

kWHP

40/3053.6/40.2

30/3040.2 - 40.2


1.525/1.0001,124/737

2.700/2.0001,991/1,475

Spindle speed range S6(40%) / S1 rpm 1.000/800 500/400

High speed multipurpose vertical machining centre, with 4 or 5 axes, offering the widest rangeof machining options such as milling, horizontal and vertical turning and grinding of small and

medium size parts. Range of materials: Superalloys (Titanium, Inconel etc), Steel and Aluminium.

Metalquartz®

MAXiMANEW

MAXiMA

9

MAXiMA 1200/1200tWiN

MAXiMA 1600K30/60/80

MAXiMA2000K30/60/80

Interpolated axes 6 6 6

X Strokemmin

2.50098.4

3.500137.8

3.500137.8

Y Strokemmin

2.000 - 6.00078 - 72 - 36

3.000 - 6.000 - 8.000118 - 236 - 315

3.000 - 6.000 - 8.000118 - 236 - 315

Z Strokemmin

1.00039.4

1.30051.1

1.30051.1

X Axis rapid feedratem/min

ipm30

1,18060

2,36060

2,360

Y Axis rapid feedratem/min

ipm30 - 20

1,180 - 78760

2,36060

2,360


ipm20

78740

1,57540

1,575

A Axis rotation 0° ÷ +135° 0° ÷ +135° 0° ÷ +135°

C Axis rotation continuous continuous continuous

A Axis rapid feedrate rpm 50 50 50

C Axis rapid feedrate rpm 100 100 100

W Axis rapid feedrate rpm 100 60 35

MilliNg sPiNDlE:Spindle power S6(40%) / S1

kWHP

85/74.6114/100

85/74.6114/100

85/74.6114/100


480/300354/221

480/300354/221

480/300354/221

Spindle speed rpm 14.000 14.000 14.000

tuRNiNg sPiNDlE:Spindle power S6(40%) / S1

kWHP

30/3040.2/40.2

88/68118/91.2

116/100156/134


2.700/2.0001,991/1,475

8.400/6.5006,196/4,794

24.600/20.00018,145/14,752

Spindle speed range S6(40%) / S1 rpm 500/400 350/300 248/230

High speed multipurpose vertical machining centre, with 6 axes, offering the widest range ofmachining options such as milling, vertical turning and grinding of medium and big size parts.

Range of materials: Superalloys (Titanium, Inconel etc), Steel and Aluminium.

Metalquartz®

titANNEW

titAN

13

Metalquartz®

titAN PM 1000K 30/45/60/80

titAN PM 1300K 30/45/60/80


X Strokemmin

2.50098.4

3.500138.8

Y Strokemmin

3.000 - 4.500 - 6.000 - 8.000118 - 177 - 236 - 315

3.000 - 4.500 - 6.000 - 8.000118 - 177 - 236 - 315

Z Strokemmin

1.00039.4

1.30051.1


ipm60

2,36060

2,360


ipm40

1,57540

1,575

A Axis rotation 0° ÷ +135° 0° ÷ +135°

C Axis rotation ± 270° ± 270°



Spindle power S6(40%) /S1kWHP

175/116234.7/155.5

175/116234.7/155.5

Spindle torque S6(40%) /S1 Nmft-lb

1.300/1.000958.7/737.5

1.300/1.000958.7/737.5

Spindle speed rpm 6.000 6.000

High power vertical machining centre, for 5 axes for millingof medium and very large parts.

Range of materials: Superalloys, Special Alloys and Steel.

FlyMill HDNEW

FlyMill HD

15

Metalquartz®

FlyMill 1000/2t DD HDK 30/45/60/80

FlyMill 1300/2t DD HDK 30/45/60/80

FlyMill 1600/2t DD HDK 30/45/60/80

Interpolated axes 5 5 5

X Strokemmin

2.50098.4

3.500137.8

3.500137.8

Y Strokemmin

3.000 - 4.500 - 6.000 - 8.000118 - 177 - 236 - 315

3.000 - 4.500 - 6.000 - 8.000118 - 177 - 236 - 315

3.000 - 4.500 - 6.000 - 8.000118 - 177 - 236 - 315

Z Strokemmin

1.00039.4

1.30051.1

1.60063

X Axis rapid feedratem/min

ipm60

2,36060

2,36060

2,360

Y Axis rapid feedratem/min

ipm60

2,36060

2,36060

2,360


ipm40

1,57540

1,57540

1,575

A Axis rotation 0° ÷ + 135° 0° ÷ + 135° 0° ÷ + 135°

C Axis rotation continuous continuous continuous

A Axis rapid feedrate rpm 50 50 50

C Axis rapid feedrate rpm 100 100 100


85/74,6114/100

85/74,6114/100

85/74,6114/100

Spindle torque S6(40%) /S1Nmft-lb

480/300354/221

480/300354/221

480/300354/221

Spindle speed rpm 14.000 14.000 14.000

High performance (speed/power) vertical machining centre,with 5 axes, for milling of medium and very large parts.

Range of materials: Superalloys, Steel and Aluminium.

FlyMill

FlyMill

17

Metalquartz®

FlyMill 1000/DDK 20/30/45/60/80

FlyMill 1300/DDK 20/30/45/60/80

FlyMill 1600/DDK 20/30/45/60/80

FlyMill 2000/DDK 45/60/80

Interpolated axes 3 - 5 5 5 5

X Strokemmin

2.50098.4

4.000157.5

4.000157.5

3.500137.8

Y Strokemmin

2.000 - 3.000 - 4.500 - 6.000 - 8.00078.7 - 118 - 177 - 236 - 315

2.000 - 3.000 - 4.500 - 6.000 - 8.00078.7 - 118 - 177 - 236 - 315

2.000 - 3.000 - 4.500 - 6.000 - 8.00078.7 - 118 - 177 - 236 - 315

4.500 - 6.000 - 8.000177 - 236 - 315

Z Strokemmin

1.00039.4

1.30051.1

1.60063

2.00078.7


ipm60

2,36060

2,36060

2,36060

2,360


ipm40

1,57540

1,57540

1,57540

1,575

A Axis rotation -105° ÷ +120° -105° ÷ +120° -105° ÷ +120° -105° ÷ +120°

C Axis rotation continuous continuous continuous continuous

A Axis rapid feedrate rpm 50 50 50 50

C Axis rapid feedrate rpm 100 100 100 100


85/74.6114/100

oror

40/4053.6/53.6

oror

54/4072.4/53.6

oror

55/4073.8/53.6

40/4053.6/53.6

oror

54/4072.4/53.6

oror

55/4073.8/53.6

40/4053.6/53.6

oror

54/4072.4/53.6

oror

55/4073.8/53.6

54/4072.4/53.6

oror

55/4073.8/53.6


480/300354/221

oror

137/100101/73.7

oror

70/5151.6/37.6

oror

22/1616.2/11.8

137/100101/73.7

oror

70/5151.6/37.6

oror

22/1616.2/11.8

137/100101/73.7

oror

70/5151.6/37.6

oror

22/1616.2/11.8

70/5151.6/37.6

oror

22/1616.2/11.8

Spindle speed rpm 14.000 or 18.000 or 28.000 or 40.000 18.000 or 28.000 or 40.000 18.000 or 28.000 or 40.000 28.000 or 40.000

High speed vertical machining centre, with 5 axes,for milling of medium and very large parts.

Range of materials: Steel, Aluminium, Composites and Resins.

WORKiNg WitH tHE bEst

WORKiNg WitH tHE bEst WORKiNg WitH tHE bEst

MAtRiX 1000-1300

MAtRiX 1000-1300

21

Metalquartz®

MAtRiX 1000/DDK 20/30/45/60/80

MAtRiX 1300/DDK 20/30/45/60/80

Interpolated axes 3 - 5 5

X Strokemmin

2.50098.4

3.900153.5

Y Strokemmin

2.000 - 3.000 - 4.500 - 6.000 - 8.00078.7 - 118 - 177 - 236 - 315

2.000 - 3.000 - 4.500 - 6.000 - 8.00078.7 - 118 - 177 - 236 - 315

Z Strokemmin

1.00039.4

1.30051.5

X - Y Axis rapid feedratem/min

ipm30 - 20

1,180 - 78730 - 20

1,180 - 787


ipm20

78720

787

A Axis rotation ± 105° or - 105° ÷ + 120° ± 105° or - 105° ÷ + 120°


A Axis rapid feedrate rpm 12 or 50 12 or 50

C Axis rapid feedrate rpm 19 or 100 19 or 100

Spindle power S6(40%) /S1KWHP

85/74.6114/100

oror

40/4053.6/53.6

oror

54/4072.4/53.6

oror

55/4073.8/53.6

40/4053.6/53.6

oror

54/4072.4/53.6

oror

55/4073.8/53.6


480/300354/221

oror

137/100101/73.7

oror

70/5151.6/37.6

oror

22/1616.2/11.8

137/100101/73.7

oror

70/5151.6/37.6

oror

22/1616.2/11.8

Spindle speed rpm 14.000 or 18.000 or 28.000 or 40.000 18.000 or 28.000 or 40.000

High speed vertical machining centre, with 5 axes,for milling of medium and big size parts.

Range of materials: Steel, Aluminium, Composites and Resins.

MAtRiX 800

MAtRiX 800

23

Metalquartz®

MAtRiX 800K 16/25

Interpolated axes 3 - 5

X Strokemmin

2.00078.7

Y Strokemmin

1.600 - 2.50063 - 98.4

Z Strokemmin

80031.5

X - Y Axis rapid feedratem/min

ipm40

1,575


ipm20

787

A Axis rotation ± 105°

C Axis rotation continuous

A Axis rapid feedrate rpm 12

C Axis rapid feedrate rpm 19

Spindle power S6(40%) /S1KWHP

40/4053.6/53.6

oror

28/2037.5/26.8

oror

55/4073.8/53.6


137/100101/73.7

oror

55/3840.5/28

oror

22/1616.2/11.8

Spindle speed rpm 18.000 or 28.000 or 40.000

High speed vertical machining centre, with 5 axes, for milling of medium size parts.Range of materials: Steel finishing, Aluminium, Composites and Resins.

EAglENEW

EAglE

25

EAglE 1000/2tK 20/30/45/80/105

EAglE 1400/2tK 20/30/45/80/105

EAglE 1600K 30/45/80/105

EAglE 2000K 30/45/80/105

EAglE 2500K 30/45/80/105

Interpolated axes 5 5 5 5 5

X Strokemmin

2.50098.4

4.000157.5

4.000157.5

4.000157.5

5.000196.8

Y Stroke

mm

in

2.000 - 3.000 - 4.5008.000 - 10.50078.7 - 118 - 177

315 - 413.4

2.000 - 3.000 - 4.5008.000 - 10.50078.7 - 118 - 177

315 - 413.4

3.000 - 4.5008.000 - 10.500

118 - 177315 - 413.4

3.000 - 4.5008.000 - 10.500

118 - 177315 - 413.4

3.000- 4.5008.000 - 10.500

118 - 177315 - 413.4

Z Strokemmin

1.00039.4

1.40055.1

1.60063

2.00078.7

2.50098.4


ipm85

3,34785

3,34785

3,34785

3,34785

3,347


ipm50

1,96950

1,96950

1,96950

1,96940

1,575

A Axis rotation 0° ÷ + 115° or ± 105° 0° ÷ + 115° or ± 105° 0° ÷ + 115° or ± 105° 0° ÷ + 115° or ± 105° 0° ÷ + 115° or ± 105°

C Axis rotation ± 270° or continuous ± 270° or continuous ± 270° or continuous ± 270° or continuous ± 270° or continuous

A Axis rapid feedrate rpm 40 or 12 40 or 12 40 or 12 40 or 12 40 or 12

C Axis rapid feedrate rpm 20 or 19 20 or 19 20 or 19 20 or 19 20 or 19


20/1627/21

oror

28/2037.5/26.8

20/1627/21

oror

28/2037.5/26.8

20/1627/21

oror

28/2037.5/26.8

20/1627/21

oror

28/2037.5/26.8

20/1627/21

oror

28/2037.5/26.8

Spindle torque S6(40%) / S1 Nmft-lb

40/3030/22

oror

55/3840.5/28

40/3030/22

oror

55/3840.5/28

40/3030/22

oror

55/3840.5/28

40/3030/22

oror

55/3840.5/28

40/3030/22

oror

55/3840.5/28

Spindle speed rpm 14.500 or 28.000 14.500 or 28.000 14.500 or 28.000 14.500 or 28.000 14.500 or 28.000

High speed vertical machining centre, with 5 axes, for milling, trimming, routing & drillingof medium and very big size parts. Range of materials: Light Alloys, Composites and Resins.

RAPtORNEW

RAPtOR

27

RAPtOR 700/2t RAPtOR 1200/2t


X Strokemmin

3.800149.6

3.800149.6

Y Strokemmin

2.800110.2

2.800110.2

Z Strokemmin

70027.6

1.20047.2


ipm80

3,15080

3,150


ipm60

2,36260

2,362

A Axis rotation 0° ÷ -115° 0° ÷ -115°

C Axis rotation ± 200° ± 200°




20/1627/21

oror

28/2037.5/26.8

20/1627/21

oror

28/2037.5/26.8

Spindle torque S6(40%) / S1 Nmft-lb

40/3030/22

oror

55/3840.5/28

40/3030/22

oror

55/3840.5/28

Spindle speed rpm 14.500 or 28.000 14.500 or 28.000

High speed vertical machining centre, with 5 axes, for milling, trimming, routing & drillingof medium and big size parts. Range of materials: Composites and Resins.

AutOMAtiON

AutOMAtiON AutOMAtiON

31

tuRN KEy sOlutiONsFrom the 3D model tothe certified final component.

pri

nte

d in

ital

y b

y La

bo

rato

rio

Gra

fico

BS

T -

07/

10 -

1.0

00 -

GB

bREtON sPA

VIA GARIBALDI, 27

31030 CASTELLO DI GODEGO

TREVISO - ITALY

TEL +39 0423 7691

FAX +39 0423 769600

[email protected]

www.breton.ituNi EN isO 9001:2000

CERt. No. 0056/4uNi EN isO 14001:2004

CERt. No. 299A/0

Breton S.p.A. reserves the right to improve the products specifications and design, even during the execution of contracts. Therefore, every figure supplied, has to be regarded as an indicative and approximate figure.

All right reserved. Any unauthorized reproduction, publication, execution, loan, or other public performance of this catalogue is peremptorily forbidden and may constitute civil responsibility. Trespassers will be prosecuted by law.

HigH PERFORMANCE MultiPuRPOsE MACHiNiNg CENtREs

Documents

Transcript of HigH PERFORMANCE MultiPuRPOsE MACHiNiNg CENtREs