High Performance Inline Fill to Level Filler...automatic and fully-automatic, with machine cycle...
2
Inline Fill to Level Filler Precision Built for High Performance The MRM/Elgin Corp. Inline Models are moderate speed fillers, ruggedly designed, yet precision built for long, trouble-free liquid filling operation. Each model features a fill-to-level design with filling accuracy maintained to within +\- 1/16 of an inch of targeted fill level. The inline series includes three easy to operate models - manual, semi- automatic and fully-automatic, with machine cycle speed up to 8 cycles per minute. Either gravity, pressure, vacuum, or combination filling systems can be utilized. A diverse range of products, including cosmetics, chemicals, food and beverages can be filled on these versatile machines. Model IFLM is suggested for use as either a lab model or as a small batch production line. The operator simply slides containers onto a stainless steel slide track to an adjustable stop point. The nozzles are now centered above the container openings. The operator lowers the spout bar, which brings the nozzles down into the containers and seals the openings. At this point, the filling cycle begins. When the operator sees product discharging from the overflow nozzle hose, the cycle is complete. The head is then raised and the container stop is manually released to discharge the containers. The cycle is repeated. Model IFLS functions in the same manner as the IFLM, but is intended for future growth to full production capabilities. This machine is designed to be easily upgraded to a Model IFLA by adding a powered conveyor and PLC for a fully automatic unit. Model IFLA incorporates an automatic conveyor and PLC to control the functions of the filling operation. Containers are conveyed into the filling area. When the correct amount of containers have entered the machine, the conveyor stops. The spout bar then descends, sealing the nozzles against the container openings. The containers are filled to the predetermined fill level, product overflow is then automatically returned to the reservoir. The filling cycle is completed based upon time factors programmed into the PLC. When the fill cycle is complete, the head is pneumatically raised, triggering the conveyor to restart, discharging the filled containers via the starwheel. e l p i c n i r P l l i F n w o h S r e l l i F y t i v a r G t u o p S 2 1 A L F I l e d o M Displaced Air/ Product Overflow Product Supply Overflow Fill Level Container Cozzoli Mach. Co. 50 Schoolhouse Road Somerset, NJ 08873-1289 USA Phone (732) 564-0400 Fax: (732) 564-0444 Email: [email protected] Website: www.cozzoli.com
Transcript of High Performance Inline Fill to Level Filler...automatic and fully-automatic, with machine cycle...
Inline Fill to Level Filler
Precision Built for High Performance
The MRM/Elgin Corp. Inline Models are moderate speed fillers, ruggedly designed, yet precision built for long, trouble-free liquid filling operation. Each model features a fill-to-level design with filling accuracy maintained to within +\- 1/16 of an inch of targeted fill level. The inline series includes three easy to operate models - manual, semi-automatic and fully-automatic, with machine cycle speed up to 8 cycles per minute. Either gravity, pressure, vacuum, or combination filling systems can be utilized.
A diverse range of products, including cosmetics, chemicals, food and beverages can be filled on these versatile machines.
Model IFLM is suggested for use as either a lab model or as a small batch production line. The operator simply slides containers onto a stainless steel slide track to an adjustable stop point. The nozzles are now centered above the container openings. The operator lowers the spout bar, which brings the nozzles down into the containers and seals the openings. At this point, the filling cycle begins. When the operator sees product discharging from the overflow nozzle hose, the cycle is complete. The head is then raised and the container stop is manually released to discharge the containers. The cycle is repeated.
Model IFLS functions in the same manner as the IFLM, but is intended for future growth to full production capabilities. This machine is designed to be easily upgraded to a Model IFLA by adding a powered conveyor and PLC for a fully automatic unit.
Model IFLA incorporates an automatic conveyor and PLC to control the functions of the filling operation. Containers are conveyed into the filling area. When the correct amount of containers have entered the machine, the conveyor stops. The spout bar then descends, sealing the nozzles against the container openings. The containers are filled to the predetermined fill level, product overflow is then automatically returned to the reservoir. The filling cycle is completed based upon time factors programmed into the PLC. When the fill cycle is complete, the head is pneumatically raised, triggering the conveyor to restart, discharging the filled containers via the starwheel.
elpicnirP lliF nwohS relliF ytivarG tuopS 21 ALFI ledoM
Displaced Air/ Product Overflow
Product Supply
Overflow
Fill Level
Container
Cozzoli Mach. Co.
50 Schoolhouse RoadSomerset, NJ08873-1289
USA
Phone (732) 564-0400Fax: (732) 564-0444Email: [email protected]: www.cozzoli.com
Inline Fill to Level Filler
STANDARD FEATURES OPTIONS
Configured with 2 to 12 Filling Nozzles Quick Change Nozzles12 Gallon Stainless Steel Supply Tank 25 Gallon Stainless Steel Supply TankProgrammable Logic Controller (IFLA) Type 304/316 Stainless Steel FrameFully Automatic Operation (IFLA) Stainless Steel Conveyor ChainType 316 Stainless Steel Wetted Contact Parts PVC, Teflon, Hastelloy or TitaniumType 316 Stainless Steel Filling Nozzles Nozzles and Contact PartsFully Wired 220 Volt, 3 Phase, 60 Cycles NEMA 7 Explosion Proof ElectricalsAccuracy to +\- 1/16 of 1 inch Positive Displacement PumpsAutomatic Overflow (IFLA) Special Tubing for Product CompatibilityPneumatic Operation of Fill Head Pneumatic or Mechanical Centering
noitceriD tfeL ot thgiRnoitceriD thgiR ot tfeLmetsyS ecalP ni hsulFgnibuT elbixelF CVP
Container Dimensions Up to 6" Wide - Standard ConveyorUp to 12" Wide - Special ConveyorUp to 12" Tall - All Machines
Air Requirements: 80 psi 1-2 cfm
Our Goal is to Exceed Your Expectations
Gravity Fill Configuration
50 Schoolhouse RoadSomerset, NJ08873-1289
USA
Phone (732) 564-0400Fax: (732) 564-0444Email: [email protected]: www.cozzoli.com
