High-Performance Butterfly Valves - Emerson...

©Fisher Controls International, Inc. 1997; All Rights Reserved

Product Flier PF51.6:8510BMarch 1997

High-Performance ButterflyValves

edisc, ENVIRO-SEAL, FIELDVUE, Fire-Tested, FloVue, Fisher, Fisher-Rosemount,Managing The Process Better, NOVEX, Phoenix III, POSI-SEAL, and ValveLinkaremarks owned by Fisher Controls International, Inc. or Fisher-Rosemount Systems,Inc. HART is mark owned by the HART Communications Foundation, Inc. All othermarks are the property of their respective owners.These products may be covered by one or more of the following patents (5,129,625; 5,131,666; 5,056,757; 5,230,498; and 5,299,812) or under pending patent applications.

l High-performance butterfly valves featuring tight shutoff andexcellent throttling performancel DIN and ANSI designsl DN 50 to DN 300 DIN and 2- to 36-inch ANSI sizesl Choice of seal materials--soft, metal, or fire-tested ™ metal-and-soft seall Temperatures to 538 °°°°°Cl Pressures to DIN PN100 and ANSI Class 600

l ENVIRO-SEAL® packing systems to help ensure compliance withenvironmental emissions requirements

l FIELDVUE® digital valve controllers offer digital control andremote diagnostics. The proven line of Fisher Controlspositioners, controllers, transmitters, and switches also isavailable.

D102454X412

W6858

2

Product Flier PF51.6:8510BHigh-Performance Valves for Excellent Flow Control and Shutoff

Accurate Flow Control... Thevalves have a splined-and-clampedconnections to positioning actuatorsfor accurate throttling or on-offcontrol. The valves are capable ofthrottling through 90 degrees ofdisc rotation with an approximatelylinear or modified equal percentage(Type 8532) characteristic.The splined-and-clamped valve-actuator connection reduces lostmotion and deadband.The valves and actuators can bereversed from push-down-to-closeto push-down-to-open in the fieldwithout additional parts.Excellent Shutoff... The soft and

metal seals are pressure assistedfor excellent shutoff.Type 8510B edisc ® Valves ... forDIN or ANSI applications. Thevalves feature DIN dimensionsand compatibility. The valve shaftis a through, balanced shaft.Also, the eccentric disc pathreduces seating torquerequirements and seat wear.Type 8560 Valves... For ANSIapplications. The Type 8560 valveis available with a Fire-Tested™seal that can meet fire-safestandards.Type 8532 Valves... This valve

shares many features with the Type8560 valve and is available in largersizes.Type 8510 edisc ® Valves... TheType 8510 valve is an ANSI designversion of the Type 8510B valve in30- and 36-inch sizes. The 36-inchsize is compatible with DIN flanges.

W3542-2

Typical Type 8510B and 8510 Construction

A6936

Pressure-Assisted Seals (VerticalArrows Indicate Disc Position with noPressure)

DISC POSITIONWITH NOPRESSURE

DIREC-TION OFPRES-SURE

DIREC-TION OFPRES-SURE

3

Product Flier PF51.6:8510BHigh-Performance Valves (Continued)

Protection Against Process FluidEmissions... Optional ENVIRO-SEAL® packing systems provide asuperior shaft seal to prevent theloss of valuable or hazardousprocess fluids. This live-loadedsystem provides longer packing lifeand reliability.

Materials for SourService... Fisher Controls offersmaterials and manufacturingprocedures for compliance withNACE (National Association ofCorrosion Engineers) standardMR0175.

POSI-SEAL™ Types A31A andA41...For less stringent throttlingapplications and for on-offapplications requiring the sameexcellent shutoff capabilities as theType 8560 and 8532. The TypeA31A and A41 valves connect to arack-and-pinion piston actuator,manual handwheel actuator, orhandlever.

H.D. Baumann 21000 Series ... Forapplications that require anelastomer-lined valve in 2- through6-inch sizes.

Other Butterfly Valves

ENVIRO-SEAL® Packing System (Single PTFE V-Ring)

W5806-1

Type 8560 Valve with ActuatorW6213/IL

4

Product Flier PF51.6:8510B

Actuators

Type 1061 ActuatorType 1052 Actuator

Type 1051 and 1052Pneumatic DiaphgragmActuators... Rugged, heavy-duty spring-return actuators.These actuators are availablewith a variety of instrumentaccessories, handwheels,adjustable travel stops, and amaintenance lock-out device.

Type 1061 Pneumatic PistonActuator... Heavy-duty piston

The High-Performance Valve Family (Continued)

The Actuators are Available in anyof Four Styles and Positions (Abovethe Pipeline as Shown Here,Below, or Parallel with the Pipeline)

actuator available with a variety ofinstrument accessories, handwheelsand piston bypass valves, and amaintenance lockout device.

Type 1077 Manual HandwheelActuator... Available for manual-onlyoperation.

Actuator Accessories

FIELDVUE® Digital ValveController... Available mounted on

Type 1051 and 1052 actuators.

Positioners andTransducers... Pneumatic positionersand electro-pneumatic positioners andtransducers can be provided withthese actuators.

Position Transmitters, SolenoidValves, Volume Boosters, and LimitSwitches... Also available.

RIGHT-HANDMOUNTING

LEFT-HANDMOUNTING

STYLE D

STYLE C

STYLE B

STYLE A

A1579-4/IL

Actuators are Field-Reversible from Push-Down-to Close (PDTC) to Push-Down-toOpen (PDTO)

J407T13

MOUNT-ING

ACTION STYLE

Righthand

PDTCPDTO

BA

Lefthand

PDTCPDTO

CD

W6475-1 W5978

5


Only a few of the more commonly selected product materials, sizes,options, and accessories are covered in this flier.

Contact your nearest sales office or sales representative (refer to the backcover) for assistance in selecting and sizing these products. More detailedspecifications are available on request.

Selecting Valve ComponentsValve Type Selection .......................................................................... 6Valve Body Information ....................................................................... 6Primary Valve Component Materials .................................................. 7Temperature Capabilities of Selected Combinations .......................... 8Inlet Pressure Ratings for M35-1 (Monel) Valves ............................... 8

Selecting an ActuatorType 1051 and 1052 Pneumatic Diaphragm Actuators ...................... 9Type 1061 Pneumatic Piston Actuator .............................................. 10

Selecting AccessoriesFIELDVUE® Digital Valve Controller ................................................. 113610J Series Valve Positioners ........................................................ 12Other Accessories ............................................................................ 13

Reference InformationFlow Coefficients .............................................................................. 14Conversions for Other Sizing Equations ........................................... 14Typical Actuator-Valve Size Combinations ....................................... 15Actuator Size Selection (Shutoff Pressure Drop) .............................. 16Dimensions ....................................................................................... 17Typical Weights ................................................................................ 18

Ordering Information ........................................................................ 19Sales Offices and Sales Representatives ........................................ 20

Selecting High-Performance Products

6


Valve Body Information

J407T02

Valve Type Selection

J407T01

APPLICATIONSHUTOFF

CLASSIFICATIONPER IEC 534-4AND FCI/ANSI

70-2-1991

SIZES,DN ORINCHES

RATINGS, DIN PNOR ANSICLASS

VALVETYPE

NUMBERNOTES

Service Valve BodyTempera-

tureSeal

DIN to DN 300 &to PN100 rating

Wafer-style steelor stainless steel

body

to 232C PTFE

See notes forstandard;

Class VI isoptional

DN 50DN 80

DN 100DN 150DN 200DN 250DN 300

10, 25, 40, 63, & 10010, 25, 40, 63, & 10010, 25, 40, 63, & 10010, 25, 40, 63, & 10010, 25, 40, 63, & 10010 & 16 or 25 & 4010 & 16 or 25 & 40

8510B

Standard shutoff forType 8510B and 8510with PTFE seal is2mL/minute of air perinch of valve size at apressure drop of 3.4bar.

Refer to pages 7 and8 for more detailedinformation aboutmaterials andtemperatures.The 30- and 36-inchsizes are compatiblewith DIN PN10 andPN 16 flanges.

to 538°CS31600 (316

stainlesssteel)

1/10 of Class IV

ANSI to 12-inch &to Class 600

Wafer-style steel,stainless steel,

CN7M (alloy 20)or M35-1 (Monel)

body

to 232°C PTFE

See notes forstandard;

Class VI isoptional

23468

1012

150/300/600150/300/600150/300/600150/300/600150/300/600150 or 300150 or 300

to 538°C S31600 1/10 of Class IV

ANSI to 24-inch &to Class 300

Wafer-style orsingle-flange

steel or stainlesssteel body

to 204°C Soft VI 3468

10121416182024

150 or 300

8560 (to12-inch)

or8532

(greaterthan 12-

inch)

to 538°C NOVEX seal1/10 of Class IV isstandard: Class V

is optional

to 232°C

Phoenix IIImetal/soft

VI

Phoenix IIIFire-Tested

sealVI

ANSI 30- & 36-inch & Class 150

rating

Wafer-style steelor stainless steel

body

to 232°C PTFESee notes for

standard; Class Vis optional

3036

150 (per MSS SP-44)

8510

to 538°C S31600 1/10 of IV

Sizes Type Valve Body MaterialsFace-to-FaceDimensions

Mating Flange Compatiblity

DIN or ANSI

DN 50through DN

300 & 2through

12inches

8510B

DIN 1.0619 steel (17245) DIN 1.4581stainless steel, WCC steel, CF3M (316Lstainless steel), M35-1 (Monel), & CN7M

(alloy 20)

DIN: 3202 Part 3/K2ANSI: API 609 for all

Class 150 valves & for 3-through 6-inch Class 300

Raised-face flanges; all sizes compatiblewith with schedule 80 and lighter welding-

neck and slip-on flanges

ANSI

3 through24 inches

8560 &8532

Steel, CF8M (316 stainless steel), & CG8M(317 stainless steel)

API 609 & MSS SP68Raised-face flanges; all Type 8560 sizescompatible with schedule 80 and lighter

welding-neck and slip-on flanges

30 & 36inches

8510WCB steel, CF8M (316 stainless steel), &

CN7M (alloy 20)30-inch: 191 mm36-inch: 222 mm

Class 150 raised-face flanges (MSSSP44); compatible with schedule 40 andlighter welding-neck and slip-on flanges

7

Product Flier PF51.6:8510BPrimary Valve Component Materials

J407T03

Phoenix III Seal

A6937

Single-Flange Valve

W6361RESILIENT INSERT

BACKUP O-RINGDISC

SEAL RING

GASKET

RETAININGRING VALVE BODY

PartDIN or ANSI (Type 8510B: DN 50

through DN 300)ANSI (Type 8560: 3- through

12 inch)ANSI (Type 8532: 14-

through 24-inch)ANSI (Type 8510: 30 &

36-inch)Notes

Discn WCC steel, n CF3M (316Lstainless steel, n 35-1 (Monel) orn CN7M (alloy 20)

n CF3M or n CG8M (317stainless steel)

n Steel or n CF8M (316stainless steel)

n WCB steel, n CF3M(316 stainless steel), nM35-1 (Monel) or nCN7M (alloy 20)

• PEEK is poly-ether-etherketone• UHMWPE isultra high-molecular weightpolyethylene• Contact yoursales office orsalesrepresentativefor moreinformation onENVIRO-SEALpacking

Sealn PTFE composition (filled PTFEfor CF3M valves) or n S31600(316 stainless steel)

n PTFE or n UHMWPE withbackup ring of:• nitrile • neoprene, •EPR, •fluoroelastomer, or • PTFE

n NOVEX seal S31600(standard for Class 150) orNitronic 60 (standard for Class300)

n S31600/PTFE Phoenix III orPhoenix III fire-tested seal withbackup ring of:• nitrile • neoprene, • EPR, or• PTFE

n PTFE, n UHMWPE,n NOVEX seal S31600(standard for Class 150) orNitronic 60 (standard for Class300), n Phoenix IIImetal/fluoreoelastomer, orn Phoenix IIImetal/fluoreoelastomer fire-tested seal

n PTFE composition orn S31600

Bear-ings

n PTFE/Composition with S31603jacket, n S44004 (440C stainlesssteel) n alloy 6 with or withoutsilver plating, n Filled PTFE withN04400 (Monel) or N08020 (alloy20) jacket

n PEEK/PTFE lined or n metal(NOVEX or Phoenix II sealsonly)

n PEEK, n S31600, n alloy6, or n bronze

n PTFE/Composition withS31603 jacket, n S44004,n alloy 6B with or withoutsilver plating, or n FilledPTFE with N04400, orN08020 jacket

Valveshaft

n S17400 (17-4PH stainless steel),n S20910 (Nitronic 50 stainlesssteel), n N05500 (Monel), nN10276 (alloy 276), or n N08020(alloy 20)

n S17400 or n S20910 n S17400 or n S20910n S17400, n S20910), nN05500, or n N08020

Packing

n PTFE V-ring, n PTFE-composition (both with oneconductive ring), n graphite ribbonrings, or n ENVIRO-SEALpacking

n PTFE V-ring, n graphite, orn ENVIRO-SEAL packing

n PTFE V-ring, n graphite, orn ENVIRO-SEAL packing

n PTFE V-ring, n PTFE-composition (both withone conductive ring),n graphite ribbon rings, orn ENVIRO-SEALpacking (30-Iinch sizeonly)

8


J407T04

Temperature Capabilities of Selected Combinations

Only selected combinations are shown here. Consult the previous table and your salesoffice or sales representative for other combinations. For simplicity, only general materialnames are given here; refer to the previous tables for more complete descriptions. ForType 8510 and 8510B valves with PTFE bearings, limit maximum temperature to 207°Cwith water or steam.

Inlet Pressure Ratings for M35-1 (Monel) Valve Bodies,Bar

J407T15

Temperature, °C 150 300 600 Note

-29 to 3893

149204232

15.813.813.112.712.3

41.336.534.133.133.0

82.772.768.265.865.7

M35-1 is not listed in ASME/ANSIB16.34. The designations 150,300, and 600 indicate relativepressure-retaining capabilities andare not ANSI pressure-temperaturerating classes.

ValveBody

Disc Shaft Seal Bearings PackingTemperature,

°CNote

TYPE 8510B--DN 50 to DN 300 or 3- to 12 INCH & 8510-- 30- & 36-INCH

For DIN valvebodiess, theminimumtemperature isnormally limited to -10°C. Contact yoursales office or salesrepresentative iflower temperaturesare required and forpressure andtemperature limitswith ENVIRO-SEALpacking..

Steel Steel S17400PTFE

S31600PTFE-composition

S44004PTFE

Graphite-29 to 232-29 to 427

Stainlesssteel

Stainless steel S17400 or N20910 PTFE PTFE-composition PTFE -40 to 232Chrome-platedstainless steel

S17400N20910

S31600S31600

Alloy 6Alloy 6

GraphiteGraphite

-40 to 232-46 to 538

TYPE 8510B--DN 50 to DN 300 or 3- to 12 INCH

M35-1 M35-1 N05500 PTFE PTFE-compositionPTFE


CN7M CN7M N08020 PTFE PTFE-compositionPTFE


TYPE 8560--3- to 12-INCH

Steel Stainless steel S17400 or N20910PTFE

NOVEX sealPhoenix III seal

PEEK/PTFEMetal

PEEK/PTFE or metal

PTFEGraphite

PTFE

-29 to 232-29 to 427-29 to 232

Stainlesssteel

Stainless steel

S17400PTFE


PEEK/PTFEMetal

PEEK/PTFE

PTFEGraphite

PTFE

-46 to 232-29 to 427 -40 to 232

N20910PTFE


PEEK/PTFEMetal

PEEK/PTFE

PTFEGraphite

PTFE

-46 to 232-29 to 538-40 to 232

TYPE 8532--14- to 24-NCH

SteelSteel or stainless

steelS17400 or N20910

PTFE with PTFE backup ringNOVEX seal

Phoenix III with EPR backup ring

PEEK/PTFES31600

PEEK/PTFE

PTFEGraphite

PTFE

-29 to 204-29 to 538-29 to 204

Stainlesssteel

Stainless steelS17400 or N20910

N20910S17400 or N20910

PTFE with PTFE backup ringNOVEX seal

Phoenix III with EPR backup ring

PEEK/PTFES31600

PEEK/PTFE

PTFEGraphite

PTFE

-29 to 232-29 to 538-29 to 232

9

Product Flier PF51.6:8510BType 1051 and 1052 Actuators

H419T40

Type 1051 and 1052 pneumaticdiaphragm rotary actuators arespring-return actuators that providereliable operation for the valves inthis flier.The Type 1051 actuator is suitablefor on-off operation or for throttlingoperation when equipped with avalve controller or positioner. TheType 1052 actuator is suitable foron-off or throttling with or without acontroller or positioner.These actuators feature single-jointlinkage with splined-and-clampedlevers for minimum lost motion andhigh control accuracy.The actuator-valve linkage iscompletely enclosed for safety, yetthe packing adjustment isaccessible without removing anyparts.

Specifications... Refer to the tablebelow and the actuator selectiontables.

Options... n Top-mountedhandwheel, n Type 1078declutchable handwheel actuator,n Adjustable up- and down-travelstops, n Actuator lockingmechanism that keeps the actuatorin a locked position duringmaintenance, and n Pipe-awayvent for remote venting of theactuator housing.

Accessories... n Pneumatic andelectro-pneumatic valve postioners,n FIELDVUE® digital valvecontroller, and n Limit andproximity switches.

Size 33 Actuator

Typical Type 1052 Actuator

W3813-1

W4742-1

ACTUATOR SIZENOMINAL OPERATING PRESSURE

RANGES

MAXIMUMCASING

PRESSURE, BAR

MAXIMUM VALVEBREAKOUT

TORQUE, N•mAMBIENT

TEMPERATURES, °CMATERIALS

Type1051

Type1052

Bar PsigType1051

Type1052

Type1051

Type1052

- - - 20n 0 to 1.2, n 0 to

2.3, and n 0 to 2.8n 0 to 11, n 0 to 33,

and n 0 to 40- - - 4.1 - - - 42

Nitrile: -40 to 82Silicone: -50 to 149

Diaphragm: Nitrile(standard) or silicone

elastomersO-rings (for optionalhandwheel): Nitrile or

EPDMHousing: Cast iron(standard) or steelOther Major Metal

Parts: Aluminum, steel,or cast iron

33 33 n 0 to 1.2, n 0 to2.3, n 0 to 2.8, and n

0 to 3.8

n 0 to 18, n 0 to 33,n 0 to 40, and n 0

to 55

4.5 85 132

40 40 5.2 322 730

60 60n 0 to 1.2, n 0 to

2.3, and n 0 to 2.8n 0 to 11, n 0 to 33,

and n 0 to 403.4 626 6460

- - - 70n 0 to 2.3, n 0 to

2.8, and n 0 to 3.8n 0 to 33, n 0 to 40,

and n 0 to 55- - - 4.5 - - - 1370

10

Product Flier PF51.6:8510BType 1061 Actuators

Type 1061 pneumatic rotaryactuators are double-acting pistonactuators that provide reliableoperation for the valves in this flier.The Type 1061 can be used with atwo-position control signal for on-off operation or with a valvecontroller or positioner for throttlingoperation.These actuators feature single-jointlinkage with splined-and-clampedlevers for minimum lost motion andhigh control accuracy.The actuator-valve linkage iscompletely enclosed for safety, yetthe packing adjustment isaccessible without removing any

parts.

Specifications... Refer to the tablebelow and the actuator selectiontables.

Options... n Type 1078declutchable handwheel actuatorwith cylinder bypass valve, nAdjustable up- and down-travelstops, n Actuator lockingmechanism that keeps the actuatorin a locked position duringmaintenance, and n Pipe-awayvent for remote venting of theactuator housing.

Accessories... n Pneumatic andelectro-pneumatic valve postionersand n Limit and proximity switches.

H419T41

W3827-1

ACTUATORSIZE

CYLINDER OPERATING PRESSURE, BAR MAXIMUM VALVEBREAKOUT TORQUE,

N•m

AMBIENTTEMPERATURES, °C

MATERIALSMinimum

RecommendedMaximum Allowable

30

Without positioner: 1.4With positioner: 0.35

bar above actuatorrequirement

6.9 282

-34 to 82(to -50 with optional

materials)

Cylinder and flange: AluminumPiston: Aluminum or nylon-

coated aluminumO-rings: Nitrile

Mounting yoke bushing: PTFEand steel

Sliding seal: BrassOther parts: Iron, aluminum,

and stainless steel

40 10.3 847

60 6.9 1130

68 5.9 1540

80 10.3 5080

100 10.3 6290

11

Product Flier PF51.6:8510BType DVC5020 Digital Valve Controller

W6161

FIELDVUE digital valve controllersare communicating,microprocessor-based controllersthat convert a current signal to apressure signal to operate theactuator. Through the HART®

communications protocol, thecontroller gives easy access toactuator-valve information that iscritical to process operation.

The Type DVC5020 controller isavailable to mount on Type 1051and 1052 actuators.

ValveLink™ Software... ValveLinksoftware allows easy access to theinformation available from theFloVue™ system. The softwareprovides diagnostic informationsuch as dynamic error band andstep response on easy-to-interpretscreens .

Access to diagnostics is through aModel 275 HART communicator ora personal computer usingWindows™ software.

Type DVC5020 Controller on aValve and Actuator with Model 275HART Communicator

FIELDVUE Valve Controller Physical Specifications

SUPPLY PRESSURE, BAROUTPUTSIGNAL

STEADY-STATEAIR

CONSUMPTION,Nm 3/h

TEMPERATURELIMITS

WEIGHT HOUSINGMinimum andRecommended

Maximum

As needed byactuator

6.5Up to 95%of supplypressure

Less than 0.3 at 1.4bar supply pressure

-40 to 80°C 2.7 kgIP 65 per IEC 529

classification

H419T45

H410T06

H419T49

FIELDVUE Controller Electrical SpecificationsELECTRICAL INPUT

DIGITALCOMMUNICATION

INPUT SIGNALAnalog Input

SignalVoltage

Minimum ControlCurrent

Minimum Currentwithout

MicroprocessorRestart

MaximumCurrent

PolarityProtection

n 4 to 20, n 4to 12 or n or 12

to 20 mA dc(user adjustable)

12 Vdc minimumand 30 Vdcmaximum

4.0 mA 3.5 mA 100 mA-30 Vdc minimumwithout damage

HART 1200 baudfrequency shift

keyed

FIELDVUE Digital Controller Certifications

INTRINSIC SAFETYINTRINSIC

SAFETY OR NON-INCENDIVE

FLAMEPROOF DIVISION 2EXPLOSION-

PROOF

LCIE CSA (1) or FM (1) SAA CENELEC SAA CSA FM CSA or FM

EEx ia IIC T5

Class I, Division1, Groups(1) A,

B, C, DT5 (T

amb 80°C)

Ex n IIC T5, T6Ex ia IIC T4, T5, T6

EEx d IIB + H2

T5 (Tamb

80°C)EEx d IIB + H

2

T6 (Tamb

80°C)

Class I Division 2,Groups A, B, C, DClass II, Division 2,

Groups E, F, G

Class I Division 2,Groups A, B, C, DClass II, Division2, Groups F, G

Class I Division 1,Groups B, C, D

Class II, Division 1,Groups E, F, G

1. Contact your nearest sales office or sales representative for the appropriate FM entity ratings and CSA parametric ratings for each group.

12

Product Flier PF51.6:8510B 3610J Series Valve Positioners

The 3610J Series pneumatic and3620J Series electro-pneumaticvalve positioners can be used withType 1051, 1052, or 1061actuators for accurate valvepositioning in throttling applications.The positioners provide accurate,fast response and can withstandthe vibrations in most plants.The positioners are easilyreversible for direct or reverse

action without additional parts.The 3610J positioners are singleacting for Type 1051 and 1052actuators, and the 3610JPpositioners are double acting forType 1061 actuators.

Options... n Supply pressuregauge, n Tire valves for clip-ongauges, and n Integrally mountedbypass valve for single-actingactuators

H419T42

H419T43

H419T44

3610J and 3620J Positioner Specifications

Type Input Signal Supply PressureOperative

TemperatureWEIGHT Connections

3610J and3610JP

n 0.2 to 1.0 or n 0.4 to 2.0 bar

n 3 to 15 or n 6 to 30 psig

0.3 bar above the actuatorrequirement up to 10.3 bar

maximum-40 to 80°C 2.5 kg

Pressure and VentConnections: 1/4-inch NPT

Type 3620J and JPConduit:1/2 NPT

3620J and3620JP

4 to 20 mA constant current with30 Vdc maximum compliance

voltage; equivalent circuit is 120ohms shunted by three 5.6 V zener

diodes

0.3 bar above the actuatorrequirement up to 10.3 bar

maximum-40 to 80°C 3.6 kg

3610J and 3620J Series Capacities and Housing

TypeSUPPLY

PRESSURE, BARSUPPLY AIR

DEMAND, Nm 3/hAir Consumption, Nm 3/h

Housing (Types 3620Jand 3620JP)

3610J and 3620J1.4 13 Type 3610J: 0.40 at 1.4 bar supply

Type 3620J: 0.49 at 1.4 bar supply

IP 54 per IEC 529classification

(weatherproof), NEMA 3;vent should be on the sideor bottom for weatherproof

applications

2.4 17

3610JP and 3620JP5.2 37 Type 3610JP: 0.64 at 6.9 bar supply

Type 3620JP: 0.93 at 6.9 bar supply6.9 46

Type 3622 Electro-Pneumatic Converter Certifications

INTRINSIC SAFETY ORNON-INCENDIVE

INTRINSICSAFETY OR

NON-INCENDIVEFLAMEPROOF DIVISION 2

EXPLOSION-PROOF

PTB CSA (1)or FM (1) SAA LCIE SAA CSA FM CSA or FM

EEx ia IIC T6

Class I,Division 1,

Groups(1) A, B,C, D T5

Ex ia IIC T4Ex n IIC T4

EEx d IICT6 Ex d IIB T6

Class I Division2, Groups A, B,

C, DClass II, Division2, Groups E, F,

G

Class I Division2, Groups A, B,

C, DClass II,

Division 2,Groups F, G

Class I, Division1, Groups A, B,

C, DClass II Division

1, Groups E, F, G

1. Contact your nearest sales office or sales representative for the appropriate FM entity ratings and CSA parametric ratings for each group.

W4920-1*

13


Type 67AFR Filter-Regulator... TheType 67AFR provides constantlycontrolled supply pressure toactuator accessories system. This

Type 67AFR Filter-Regulator Specifications

OUTLET PRESSURESETTINGS

MAXIMUM INLETPRESSURE

(BODY RATING) ,BAR

MAXIMUMDIAPHRAGM

PRESSURE, BAR

TEMPERATURECAPABILITIES

CONNECTIONSMAXIMUM FLOW

COEFFICIENT,C

v

WEIGHT,kg

Bar Psig

0.2 to 1.20.3 to 2.12.1 to 3.42.4 to 5.5

3 to 205 to 35

30 to 6035 to 100

17.2

3.4 over outletsetting or 7.6,whichever is

greater

Nitrile diaphragmand plug: -29 to

82°CFluoroelastomerdiaphragm and

plug: -18 to 149°C

Inlet and Outlet: 1/4-inchNPT female

Vent: n 6.4 mm hole orn 1/4-inch NPT female

0.28 0.7

H410T13

Type 646 or 846 Electro-Pneumatic Transducers... Thesetransducers convert a standard 4 to20 mA dc signal to a proportionalpneumatic signal. Certifications aren CE Mark to EMC directive(electromagnetic compatibility);n Contact your nearest sales officeor sales representative for intrinsicsafe and flameproof ratings.

Type 2626 Volume Booster... Thevolume booster can be used in

conjunction with a postioner toincrease actuator stroking speed.

Others... n High-pressure supplypressure regulators, n proximityswitches, n microswitches,n solenoid valves, and n signalvolume boosters.

Contact your nearest sales office orsales representative for moreinformation.

regulator features an internal filterand limited-capacity internal relief,allowing partial reduction ofdownstream pressure.

Other AccessoriesType 3065 Limit Switch Box

The limit switch box can beinstalled on the Type 3024Sactuator to hold proximity ormicroswitches, which can turn onan alarm or display device when apre-set limit is reached. Additionalmicroswitches are available.

The device has separate cams foropen and closed positions, andadjustment of one cam does notaffect the other.

Certifications... CE Mark to EMCdirective n EN 50081 andn EN 50082

Self-Adjusting... Complicatedadjustments are not required.

StandardizedInstallation... Covered by IEC534-6 (NAMUR). The box can besupplied with a mounting kit.

W6682B

W5075

14

Product Flier PF51.6:8510BSelected Flow Coefficients

J407T05

Conversions for Other Sizing EquationsFollowing are conversions for use with other common sizing equations.

KV = (0.865) C

V

C1 = 39.76(√X

T)

Cg = C

VC

1

Km = F

L2

CS = 1/20 (C

g). C

s is only applicable for inlet pressures up to 70 bar(a).

Line-to-Valve Size Ratios Greater than 1-to-1Contact your nearest sales office or sales representative for information ondeteriming the F

P , the piping geometry factor.

VALVE SIZEValve Rotation, Degrees (Line Size Equals Valve Size)

10 30 60 90 10 30 60 90 10 30 60 90

DIN Inches CV

FL

XT

DIN or ANSI (Type 8510B Normal Flow--Seal Retainer Upstream)

DN 50DN 80

DN 100DN 150DN 200DN 250DN 300

23468

1012

2.256.2911.932.286.492.1151

19.948.282.5221382471732

58.9137222543889

15102260

80.2247434921

180035704880

- - -- - -- - -- - -- - -- - -- - -

.77

.81

.79

.71

.70

.76

.69

.76

.69

.71

.62

.66

.69

.69

.71

.57

.56

.54

.54

.49

.50

.289

.446

.325

.416

.375

.466

.429

.315

.413

.375

.394

.316

.432

.452

.497

.322

.366

.289

.284

.348

.339

.442

.230

.250

.214

.209

.156

.166

ANSI (Type 8532 Seal Side of Valve Facing Downstream)

Class 150

- - -- - -- - -- - -- - -

1416182024

95129166208322

995946

122015202370

3980542069608730

13 540

63208600

11 05013 85021 500

- - - .81 .69 .52 .51 .55 .40 .23

Class 300

- - -- - -- - -- - -- - -

1416182024

102136173214329

747995

127015702420

30604070518064109880

67909050

11 50014 25021950

- - - .81 .69 .52 .51 .55 .33 .23

ANSI (Type 8510 Normal Flow--Seal Retainer Upstream)

- - -- - -

3036

10501500

45506510

15 40022 000

35 00050 000

- - - .75 .69 .49.284.284

.413

.416.255.258

.160

.160

15


Typical Actuator-Valve Size Combinations

Shown are actuator size selectionsfor two common valves. The tablesillustrate the factors that must beconsidered when determining thepressure drop and actuator size foryour application:

J407T08

VALVE TYPEVALVE SIZE DIAPHRAGM

TYPE 1051 &1052 SIZE

PISTONTYPE 1061 SIZEDIN Inches

8510B

DN 50DN 80

DN 100DN 150

DN 200, 250DN 300

2346

8, 1012

20, 33, 4033, 40

33, 40, 6040, 60

40, 60, 7060, 70

3030

30,40, 60, 6830, 40, 60, 6830, 40, 60, 68

40, 60, 68

Class 150 8560

- - -- - -- - -- - -- - -- - -

3468

1012

20, 33, 4033, 40

33, 40, 6040, 60

40, 60, 7060, 70

3030

30, 40, 60, 6830, 40, 60, 6830, 40, 60, 68

40, 60, 68

Class 300 8560

- - -- - -- - -- - -- - -- - -

3468

1012

33, 4033, 40, 60

40, 6040, 60, 70

60, 7060, 70

3030, 40, 60, 6830, 40, 60, 6830, 40, 60, 68

40, 60, 6080

Class 150 8532

- - -- - -- - -- - -

14, 16182024

40, 60, 7060, 7060, 70

- - -

40, 60, 6840, 60, 68

40, 60, 68, 8040, 60, 68, 80

Class 300 8532- - -- - -- - -

141618

60, 7060, 70- - -

68, 8068, 8068, 80

8510 - - - 30, 36 - - - 80, 100

J407T14

Note

It is not implied that theselection shown is bestfor your application.

For pressure dropslower than those shown,a lower actuator pressureor smaller actuator mightbe satisfactory.

For pressure dropshigher than those shown,a higher operatingpressure or largeractuator will be required.

Contact your sales officeor sales representativefor other sizes andoperating pressures.

With rotary valves, the highestpressure drop occurs when thevalve is shut off. When the valve isopen, pressure drop is normallymuch lower. However, pressuredrop capabilities of a rotary valvealso are lower when the valve isopen. The allowable flowingpressure drop across a valvedepends on the valve construction,valve position, the type of flowingfluid (liquid or gas), and on the vaporpressure and critical pressure ratioof liquids.

Actuator Size Selection (Shutoff Pressure Drops)

Valve size Inlet pressure and valve rating Valve component capabilities Fluid temperature Flow direction Supply pressure available Desired action (air open or air to close)

16


Actuator Size Selection (Shutoff Pressure Drops) (Continued)

J407T06

Type 8510B DIN or ANSI Valve (Steel) with PTFE Seal and PTFEBearings (Forward Flow)

Type 8510B DIN or ANSI Valve (Steel) with S31600 Seal and PTFEBearings (Forward Flow)

J407T07

Only allowable shutoff pressuredrops are shown here. Todetermine the allowable flowingpressure drop, provide yoursales office or salesrepresentative with theapplication information shown onpage 19.

Do not exceed any other limitspresented in this flier. Following is abrief reminder of some of those limits:

Maximum Inlet Pressure andTemperature... Do not exceed themaximum rating of the valve (refer tothe valve type selection table).

Materials TemperatureLimits... Refer to the tablesshowing temperature capabilitiesfor valve materials, actuators, andaccessories.

VALVESIZE

ActuatorSize

ShutoffPressure Drop, Bar

Pressure to ActuatorNotes

At 38°C At 232°C Bar PsigType 1052 Push-Down-to-Close (Air Closes)

DN 50DN 80

DN 100DN 150

2346

20333340

21.949.217.049.0

21.949.217.049.0

0 - 2.80 - 2.30 - 2.80 - 3.8

0 - 400 - 330 - 400- 55

For higher pressuredrops, larger actuatorsare available.For lower pressuredrops, lower operatingpressures can be usedPressure drop at 232°C,if lower than thepressure drop at 38°C, isbased on the capabilitiesof the valve.

DN 200DN 250DN 300

81012

606070

57.921.015.5

31.017.217.2

0 - 2.30 - 2.30 - 2.3

0- 330- 330 - 33

Type 1061 Push-Down-to-Close or OpenDN 50DN 80

DN 100DN 150

2346

30303030

51.051.051.041.6

51.051.051.041.6

4.14.14.14.1

60606060

DN 200DN 250DN 300

81012

406040

31.017.214.4

31.017.214.4

6.94.15.5

1006080

VALVESIZE

ActuatorSize

ShutoffPressure Drop, Bar

Pressure to ActuatorNotes

At 38°C At 232°C Bar PsigType 1052 Push-Down-to-Close (Air Closes)

DN 50DN 80

DN 100DN 150

2346

20333340

56.364.553.857.9

3.43.43.43.4

0 - 2.80 - 2.30 - 2.80 - 3.8

0 - 400 - 330 - 400 - 55 For higher pressure

drops, larger actuatorsare available.For lower pressuredrops, lower operatingpressures can be usedPressure drop at 232°Cis based on thecapabilities of the valve.

DN 200DN 250DN 300

81012

404060

30.215.723.3

3.43.43.4

0 - 3.80 - 3.80 - 2.8

0 - 550 - 550 - 40

Type 1061 Push-Down-to-Close or OpenDN 50DN 80

DN 100DN 150

2346

30303030

56.264.553.849.0

3.43.43.43.4

6.96.96.96.9

100100100100

DN 200DN 250DN 300

81012

303040

20.910.121.1

3.43.43.4

6.96.96.9

100100120

17


Dimensions

J407T09

H419T24

ActuatorType

ActuatorSize

C E

1051334060

289333473

338505749

1052

2033406070

251289333473536

256338607876849

1061

304060

171206267

378425406

6880100

324324381

483714714

Dimensions A and X (mm)

Dimensions C and E (mm)

J407T12

B2531 AX

E

C

TYPE 8510B & 8560 DIMENSION X

Valve Size DIN orANSIType

8510B

ANSI Type 8560

DINANSI,Inches

Class150

Class300

DN 50DN 80DN 100DN 150

2346

239256178362

- - -258280332

- - -274302357

DN 200DN 250DN 300

81012

392405445

360402427

395416456

TYPE 8510 & 8510 DIMENSION A

TypeValveSize,

Inches

Class150

Class300

8532

1416182024

92102115127154

118133149159181

85103036

191222

- --- - -

TYPE 8510 & 8532 DIMENSION X

TypeValveSize,

Inches

Class150

Class300

8532

1416182024

475520548718778

650683705- - -- - -

85323036

- - -- - -

819903

J407T17

J407T16

TYPE 8510B & 8560 DIMENSION A

Valve Size DINType

8510B

ANSIType

8510B

ANSI Type 8560

DINANSI,Inches

Class150

Class300

DN 50DN 80

DN 100DN 150

2346

43495670

45485657

- - -485457

- - -485459

DN 200DN 250DN 300

81012

717683

647183

847181

738392

18

Product Flier PF51.6:8510BTypical Weights

J407T10

Weights are in kilograms and are for valve and actuator combined. Not allpossible valve and actuator size combinations are shown.

Typ ica l W eigh t--W afer-S ty leType 8510B and 8560 Valves

Va lve S izeD IN o r A N S I T Y P E 85 10B A N S I Typ e 8560

Typ e 1 052A c tu a to r


C lass 150 C lass 300

D INA N S I,

In ch es





S ize W e ig h t S ize W e ig h t S ize W e ig h t S ize W e ig h t S ize W e ig h t S ize W e ig h t

D N 50D N 80

D N 100D N 150

2346

20333340

18.326.930.164.0

30303030

26.327.931.141.0

- - -203333

- - -144050

- - -303030

- - -324151

- - -333340

- - -344477

- - -303030

- - -354555

D N 200D N 250D N 300

81012

404060

76.091.0164

303040

53.068.0101

404060

92120199

303040

6997

136

406060

98188233

304080

75125263

J407T11

J407T18

Typical Weight--Wafer-StyleType 8532 and 8510 Valves

ValveSize,

Inches

ANSI TYPE 8532

Class 150 Class 300

Type 1052Actuator

Type 1061Actuator

Type 1052Actuator

Type 1061Actuator

Size Weight Size Weight Size Weight Size Weight

1416182024

40406060

- - -

117139231259- - -

4040404040

101123168196284

6060

- - -- - -- - -

213366- - -- - -- - -

686868

- - -- - -

177239283- - -- - -

Typical Weight--Type 8510Valves

ANSI TYPE 8510

ValveSize,

Inches

Type 1061Actuator

Size Weight

3036

8080

9381143

19


When ordering, please specify...

Application

Type of ApplicationThrottling or on-off

Reducing or relief

Controlled Fluid

Include chemical analysis offluid if possible

Specific gravity

Fluid Temperature

Inlet Pressures

Minimum

Normal

Maximum

Pressure Drops

Minimum flowing

Normal flowing

Maximum flowing

Maximum at shutoff

Flow

Minimum controlled

Normal

Maximum

Maximum Permissible Noise Level, if Critical

Shutoff Classification Required

Line Size, Schedule, and End connection Type

Valve, Actuator, and Accessories

From this or other product flier, select your choice where evera choice is offered. If you cannot find the selection you need,contact your nearest sales office or sales representative.

H410T11

Ordering Information

20

Product Flier PF51.6:8510BFor Further Information, Contact...

Fisher ControlsMarshalltown, Iowa 50158 USACernay 68700 FranceSao Paulo 05424 BrazilSingapore 0512

The contents of th is publ icat ion are presented for informat ional purposes only, and whi le every effor t has been made to ensure their accuracy, they are not to beconstrued as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs orspecifications of such products at any time without notice.

FRANCE and French-Speaking AfricaFisher-Rosemount1 rue TraversièreSilic 125F- 94523 Rungis) 1.49.79.73.00

GERMANYFisher-Gulde RegelarmaturenGmbH & Co. KGMannheimer Str. 63D-67071 Ludwigshafen) 0621.6811.0

HUNGARYFisher-RosemountErsébet Királyné útja 1/cHu- 1146 Budapest) 1.343.02.03

ITALYFisher-RosemountVia dell' Artigianato 8/12I-20053 Muggió (Mi)) 2.274.291

NETHERLANDSFisher-RosemountPatrijsweg 140NL-2289 EZ Rijswijk) 070.340.96.66

NORWAYSolberg & AndersenPostboks 34 BrynN - 0611 Oslo) 22.63.57.00

AUSTRIAFisher-RosemountIndustrie - Zentrum No SudStraße 2a, obj M29A- 2351 Wr. Neudorf) 2236.607

BELGIUMFisher-Rosemountde Kleetlaan 4B-1831 Diegem) 2.716.77.11

CISFisher-RosemountMalaya Trubetskaya 811th floorCIS-119881 Moscow) 095.245.86.86

CZECH RepFisher-RosemountV olsinách 75Cz- 100 97 Praha 10) 2-8100.2666

DENMARKFisher-RosemountHejrevang 11DK-340 Allerød) 45.48.17.03.33

FINLANDOy Valmet-RosemountSinimaentie 10BFIN - 02630 Espoo) 0523.500

POLANDFisher-RosemountAl. Wilanowska 272PL- 02665 Warszawa) 22.473.766

PORTUGALFisher-RosemountRua Alfredo da Silva 8P-2720 Alfragide) 1.471.32.08

SLOVAK RepFisher-RosemountHanulova 5/bSR- 84101 Bratislava) 07.787.811

SPAINFisher-RosemountCtra Fuencarral-AlcobendasKm 12.2; Edificio Auge 1E-28049 Madrid) 1.358.91.41

SWEDENPEABIlanda GårdS - 65350 Karlstad) 054.530750

SWITZERLANDFisher-RosemountBlegistr. 21CH-6341 Baar) 41.768.61.11

UNITED KINGDOM and Middle EastFisher-RosemountKnight Road, StroodGB-Rochester, Kent ME2 2EZ) 01634.73.60.00

High-Performance Butterfly Valves - Emerson...

Documents

Transcript of High-Performance Butterfly Valves - Emerson...