High-efficiency helical bevel gear motors SIMOGEAR gear motor series encompasses an intricately...
2
usa.siemens.com/SIMOGEAR SIMOGEAR helical bevel gear motors • Mounting options: Foot, flange, and torque arm • Inch or metric shafts in common dimensions • Shaft types: Solid, hollow, and SIMOLOC • Gear teeth hardened and ground for infinite life • Synthetic oil standard for longer maintenance intervals • Aluminum housings are lightweight and do not require paint • Inverter-duty NEMA Premium® and NEMA Energy Efficient motors (230/460VAC, 60Hz) • Conduit box with NPT-tapped holes • Standard 9-pin terminal block in 3x3 configuration Helical bevel gear motors 2-stage (B Series) Efficiency Up to 96% Output torque (lb-in) 442 to 3,982 Ratio 3.47 to 59.28 Motor power (HP) 1/3 to 10 The power of 2%: Our SIMOGEAR 2-stage helical bevel unit gives you higher ratios in the first gear stage than traditional designs. All told, the unit averages 2% higher efficiency than 3-stage units. For any continuous duty application, that translates to substantial energy savings over the long term. Easy installation • SIMOLOC keyless tapered shaft locking system allows for easier installation on hollow shaft applications • An integrated mounting flange is incorporated into the gearbox housing, however other common flanges are also available E-readable • RFID nameplates allow for quick identification, while Smart Numbers make ordering of exact duplicates effortless Field modifiable • MODULOG modular concept uses various mounting shafts to add options such as brakes, encoders, and external fans that can be field-retrofitted after installation Conveyors ASRS Travel Drives & Hoists usa.siemens.com/SIMOGEAR High-efficiency helical bevel gear motors SIMOGEAR B Series
Transcript of High-efficiency helical bevel gear motors SIMOGEAR gear motor series encompasses an intricately...
usa.siemens.com/SIMOGEAR
SIMOGEAR helical bevel gear motors• Mounting options: Foot, flange, and torque arm• Inch or metric shafts in common dimensions• Shaft types: Solid, hollow, and SIMOLOC• Gear teeth hardened and ground for infinite life• Synthetic oil standard for longer maintenance intervals• Aluminum housings are lightweight and do not require
paint• Inverter-duty NEMA Premium® and NEMA Energy Efficient
motors (230/460VAC, 60Hz)• Conduit box with NPT-tapped holes• Standard 9-pin terminal block in 3x3 configuration
Helical bevel gear motors 2-stage (B Series)
Efficiency Up to 96%
Output torque (lb-in) 442 to 3,982
Ratio 3.47 to 59.28
Motor power (HP) 1/3 to 10
The power of 2%:
Our SIMOGEAR 2-stage helical bevel unit gives you higher ratios in the first gear stage than traditional designs. All told, the unit averages 2% higher efficiency than 3-stage units. For any continuous duty application, that translates to substantial energy savings over the long term.
Easy installation• SIMOLOC keyless tapered shaft locking system allows for
easier installation on hollow shaft applications• An integrated mounting flange is incorporated into the
gearbox housing, however other common flanges are also available
E-readable• RFID nameplates allow for quick identification, while Smart
Numbers make ordering of exact duplicates effortless
Field modifiable• MODULOG modular concept uses various mounting shafts to
add options such as brakes, encoders, and external fans that can be field-retrofitted after installation
Conveyors ASRS Travel Drives & Hoists
usa.siemens.com/SIMOGEAR
High-efficiency helical bevel gear motorsSIMOGEAR B Series
The SIMOGEAR gear motor series encompasses an intricately stepped line of gear motors featuring helical, parallel shaft, and bevel gear units plus NEMA Energy Efficient and NEMA Premium® Efficient motors. SIMOGEAR gear motors smoothly
www.usa.siemens.com/SIMOGEAR
Subject to change without prior notice Order No.: MDFL-00002-0713 Printed in USA © 2013 Siemens Industry, Inc.
Siemens Industry, Inc. 3333 Old Milton Parkway Alpharetta, GA 30005 1-800-241-4453
The information provided in this flyer contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract.
All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.
Can your supplier deliver high-efficiency gear motors quickly?
integrate with other Siemens drive train components. You benefit from this high level of innovation, quality, and expertise.
Your Needs Siemens Answers
Fast delivery 10 days or less standard delivery from our South Carolina assembly plant
Lower operating costs NEMA Premium® Efficient or NEMA Energy Efficient motors coupled with highly efficient helical and bevel gearing
Design and order quickly Easy-to-use online configuration tool provides exact 3D CAD data and a detailed summary of your configured gear motors
Identify instantly RFID nameplates allow for quick identification, while Smart Numbers make ordering of exact duplicates effortless
Reduce installation time Lightweight aluminum housings make units easier to handle, and the SIMOLOC keyless tapered hollow shaft locking system allows for ease of installation
Help and support 24/7 Network of 1,200+ service engineers and technical professionals who are on call, on-site, and on-line 24/7
Single source supplier Siemens is the only automation supplier able to deliver end-to-end conveyor solutions which benefits you by reducing assembly and commissioning costs, shortening time to market, and increasing system flexibility and reliability
We’ve responded to what we know our customers want with compact and highly efficient gear motors, short delivery times, and long-term, single-source service. Visit our website to learn more about SIMOGEAR or to configure your own gear motor today.
NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. (US DOE CC# 032A)
