High Density Mobile Systems by - Filing Solutions · PDF fileHigh Density Mobile ... SPACE...
Transcript of High Density Mobile Systems by - Filing Solutions · PDF fileHigh Density Mobile ... SPACE...
High Density MobileSystems by
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
Double your filing capacity.Or, free up to 50% of your existingfloor space for other uses… workstations… a conference center…mail room, etc.
By mounting shelving units onmovable carriages that roll ontracks, SpacePro eliminates theneed for aisles. You can utilizeyour existing shelving or filingcabinets with the SpacePro systemor select from a wide range ofstorage options.
SPACE SAVINGS are Only the Beginning!
High Density, Very High StyleFrom high end legal offices, medical facilities and financialinstitutions to warehouse operations, SpacePro complementsthe style of your workplace with a virtually endless selectionof end panels in solid colors, woodgrains and beautifuldesigner patterns.
An electronic touchpad or ergonomic handle allowseffortless movement of an entire library.
Custom Designs,Creative SolutionsOur experienced Sales Team andCAD Design department can create acustom layout targeting your specificneeds with a comprehensive quote forthe mobile system, shelving andaccessories to suit your businessapplication.
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
QUALITY ENGINEERING sets SpacePro® apart!
Multiple Track DesignsAll SpacePro track designs incorporate tongue and groove railconnections to maintain proper rail alignment for smooth andeasy carriage movement with minimal effort. From smallsurface mount track systems to raised level deck systems,SpacePro has the track to suit your needs.
Solid FoundationSpacePro deck systems utilize top grade 3/4" tongue andgroove plywood providing a level, safe and substantialwalking surface ideal for the floor covering of yourchoice.
Carriage DesignAll carriages come complete withwelded cross members thatutilize factory installed andtested dual flange wheels housedin lifetime maintenance free bearings.
Mechanical Assist Drive Systemwith Ergonomic HandleMechanical assist systems feature full-length drive shafts. Byturning the handle, the chain drive transfers power to the driveshaft moving all drive wheels throughout the carriage simultaneously.This prevents racking of carriages. A simple chain tensioning deviceprovides infinite chain adjustment for trouble-free use. Manually movedcarriages are also available for smaller systems.
SpacePro’s uniquely designed mechanical assist handle affords effortless carriage movement. Bygrasping and turning one of the three rotating knobs, users can easily move multiple carriages at onetime. The die cast aluminum construction and powder coat finish provide a combination of aesthetics anddurability suitable for high-end office environments or heavy industrial work settings.
Unique one-piece weldedwheel channels create theindustry’s strongestcarriage framework Electrical Touchpad
Control
DRIVE SHAFT
T
SHELVING OR CABINETRY MOUNTS DIRECTLY TO CARRIAGE
ERGONOMIC HANDLE
END PANEL
by American Filing Solutions
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
CHAIN DRIVE ASSEMBLY
WHEELCHANNEL
DOUBLE FLANGEDPILLOW BLOCK BEARINGS
CARRIAGE
CHAINTENSIONER
T-TRACK
RAMP
CROSS OVER CHAIN
DECK
GROUT
BUMPER
T-TRACKEND STOP
DUAL FLANGE WHEEL
DETAILS make the DIFFERENCE
Mechanical assist handlewith push/pull safety pin
Neoprene track insertseliminate debriscollection allowingcarriages to rollsmoothly
All systems have dualflange wheels toeliminate carriagederailment
Carriage bumpers formedia protection
Track end stops
Electrical Drive System with Touchpad ControlWith this state of the art computerized electrical drive system, multiple carriages can be moved with justa touch. The advanced touchpad design provides oversized touch areas for “hands full” operation and
an ADA friendly environment. Options include an interface with file tracking software, buildingalarm and fire suppression systems as well as remote computer control.
Safety FirstAll electrical SpacePros include a standard three level redundant safety
system. All mechanical assist handles are equipped with a safetylocking pin to disable carriage movement. Carriage mounted
bumpers provide the proper spacing for media protection.
Storage UnitsSpace Pro carriages are designed to
accept virtually every style ofshelving and cabinetry,
either new or existing.
GS-00F-0043L
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
LIMITLESSApplicationsHospitalsClinicsDoctor and Dentist OfficesLaw FirmsBanksCourthouse RecordsLaw Enforcement AgenciesSchoolsUniversitiesLibrariesCommunity CentersMilitary BasesGovernment AgenciesHuman ResourcesMuseumsManufacturingCountry ClubsWarehousesRetailLaboratoriesAutomotiveCasinos
If You Need to Store It,SpacePro will Hold It!
Letter or Legal FilesX-RaysMammogramsArchivesGolf BagsEngine PartsPharmaceuticalsVideos and CDsBooks and BindersMicrofilmMicroficheComputer Discs
SpaceProend paneloptions includeeconomicalpedestal covers,Designer Edge,ProEdge withvinyl trim andRadius Edgewith aluminumtrim. (L to R).
FUNCT
IONAL
Flex
ible
Vers
atile
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
Large or small, SpacePro has thesolution for your storage requirements.
By installing storage equipment onmovable carriages (eliminating wastedaisles), you can double your storagecapacity or free up valuable floor spacefor other facets of your operations.Consult your authorized SpaceProdistributor for details.
Providing the Service You Expec t
AND IN THE END…More SpaceMore VersatilityMore Value
BEFORE YOU CALLED AFTER WE INSTALLED
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
SECTION: Mobile Aisle Specifications page 1
PRO®
Mobile Systems Quik-Spec SpecificationsManual Mobile Aisle Series
3" — 1,000 LB. SERIESFor systems up to 1000 lbs. per linear ft.
TRACKS1.0 System designed to utilize C, Low-Pro,T or Anti-Tip Tracks.
1.1 Shims (C-Track) or grout (T-Track,Anti-Tip Track) are provided for properleveling to ensure smooth operation.
1.2 Low-Pro tracks may be secured to thefloor with rawl type anchors or double-sidedtape.
1.3 All track sections are designed with atongue and groove lap connection betweeneach rail joint. This provides a superiorconnection and proper alignment for smoothcarriage movement.
RAISED FLOOR DECKING(WHEN APPLICABLE)2.0 Decking to be constructed of 3/4" highdensity cabinet grade plywood. Flameretardant decking is an option.
2.1 Decking shall support a minimum of 250lbs. per sq. ft.
2.2 Decking to be installed flush and tight tothe track.
2.3 Decking to be installed in a manner thatwill prevent warping, deformation andmovement during normal use and operation.
2.4 Decking may be finished with floorcovering as specified by end user.
RAMPS3.0 Beveled ramp grade shall be ADAcompliant.
3.1 Ramps constructed of 3/4" plywood in14", 18", or 24" width as determined bycarriage length.
CARRIAGES4.0 All carriages are of 3" high welded steelconstruction; carriage side members consist of12 gauge welded steel and are capable ofsupporting 1000 lbs. per lineal carriage foot.
4.1 Carriage cross members are 12 gauge11/2" x 3" welded “U” shaped steel channels.
4.2 Optional fixed carriages shall be of thesame construction and height as movablecarriages and shall be anchored to the floorfor a complete, homogeneous system.
4.3 Carriage design allows shelving to besecurely anchored to the top surface of allcarriages.
WHEELS5.0 All wheels to be a minimum of 31/4" indiameter, double flanged, precision ground,balanced and constructed from solid steel forsmooth operation.
5.1 A minimum of four wheels is requiredper movable carriage.
END PANELS6.0 All optional end panels are to be the fullheight and depth of the shelving ends.
6.1 Melamine or high pressure laminatecovered end panels to be 3/4" in thickness.
6.2 Optional laminates are available uponcustomer request.
6.3 Shelving closed end panels may be usedas finished product.
ATTACHMENT OF SHELVING7.0 Carriage construction shall be designedto allow numerous shelving designs to besecurely anchored to the carriages. Shelvingshall be secured to the carriages with specialtek screws provided.
QUALITY CONTROL8.0 Systems are checked at the factory toensure high quality and uninterrupted fieldinstallation.
INSTALLATION STANDARDS9.0 All parts and fasteners are provided toensure proper and safe installation.
9.1 All mobile systems are to be installed bytrained technicians.
CLEAN UP & DOCUMENTATION10.0 All debris and excess materials resultingfrom installation shall be removed and theconstruction area left in a broom cleancondition.
10.1 Additional Operators Manuals areavailable upon request.
DATE: OCTOBER 1, 2003SPECIFICATIONS ARE SUBJECT TO CHANGE.
by American Filing Solutions
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
SECTION: Mobile Aisle Specifications page 2
PRO®
Mobile Systems Quik-Spec Specifications1000 lb. LP3 Mechanical Assist Carriage
T TRACK1.0 Rail to be 1/2" wide x 3/4" high # 1018cold rolled steel rail positioned in 6063T56“T” aluminum extrusion. Rail to be machinedon all sides.
1.1 Each track to have a minimum basewidth of 3".
1.2 Leveling screws provided to ensureproper leveling for smooth operation.
1.3 Track is secured to the floor with rawltype anchors (supplied) and grouted in place.
1.4 Track sections designed with tongue andgroove lap connection between each rail jointproviding a smooth rail surface for ease ofcarriage operation.
1.5 Rail and trough drawings are availablefor optional recessed rail installation to makesystem level with the existing floor ifrequired.
1.6 The space between the rail and thealuminum housing will be filled with aneoprene material to prevent debris fromaffecting carriage movement.
1.7 C-Track, Low-Pro Track and Anti-TipTrack also available. Consult customersupport for specifications.
RAISED FLOOR DECK2.0 Standard elevated deck constructed of3/4" plywood. Flame retardant decking is anoption.
2.1 Decking shall support a minimum of250 lbs. per square foot.
2.2 Decking to be installed flush and tightto the track.
2.3 Deck to be installed in a manner thatwill prevent warping, deformation andmovement during normal use and operation.
2.4 Deck may be covered with floorcovering as specified by the end user.
RAMPS3.0 Beveled ramp grade shall be ADAcompliant.
3.1 Ramps constructed of 3/4" plywood in14", 18", or 24" width as determined bycarriage length.
CARRIAGE4.0 Welded steel construction; carriage sidemembers consist of 12 gauge welded steelcapable of supporting 1,000 lbs per linearcarriage foot.
4.1 Fixed carriages shall be of sameconstruction and height as movable carriagesand anchored to the rails for a complete,homogeneous system.
4.2 Necessary carriage splices shall be boltedtype to maintain proper unit alignment.
4.3 Carriage cross members are 12 gaugewelded U-shaped steel channels.
4.4 Carriage construction to allow shelvingto be securely anchored to the carriages.
WHEELS5.0 All wheels to be a minimum of 31/4" indiameter, double flanged as required,precision ground, balanced and constructedfrom solid steel for smooth operation.
5.1 Each drive wheel will be fitted with twopermanently sealed and shielded bearingshoused in a self-aligning flanged pillow blockhaving a dynamic load rating of 2,200 lbs. perbearing.
5.2 A minimum of four guide wheels isrequired per movable carriage.
DRIVE SYSTEM6.0 All mobile carriages shall be fitted withfull length drive shafts.
6.1 All drive shafts shall be a minimum of11/8" hollow steel and connect all wheels ondrive side of carriage. All axles shall be solidsteel and support the full load of the carriage.
6.2 Complete drive shaft/axle and wheelassemblies shall be secured by means of amechanically retained coupling methodeliminating any loose connections betweenshafts and axles and shall exhibit no play orlooseness through the length of carriage.
6.3 The mechanical assist handle shall be ofergonomic design. The transfer of powerfrom the handle to the drive shaft shall bedirect drive and chain driven.
6.4 All mechanical assist systems are to bemoved by means of a chain and sprocketreduction drive system.
6.5 Mechanical assist tower attaching pointsshall be created using a CAM/CNC methodto provide precise alignment for attachmentto the carriage.
6.6 Dual control options are available foroperation of mobile carriages from either orboth ends.
6.7 All mechanical assist systems areequipped with a push-pull safety parkingbrake as a standard feature.
DRIVE EFFORT7.0 Gear ratio to be determined by carriagelength and weight; factory calculates correctdrive effort for each system consideringlength, weight loads and number of carriagesto be moved.
7.1 There is no "play" in the drive handleand the carriage will stop without driftingwhen operation of the actuator is terminatedon all leveled systems.
END PANELS8.0 All optional end panels are to be fullheight and depth of the shelving ends pluscarriage height.
8.1 Melamine or high-pressure laminatecovered end panels to be 3/4" in thickness.
8.2 Optional laminates are available uponcustomer request.
8.3 Steel chain covers or end panels may besupplied as specified. They shall cover onlythe exposed chain drive mechanism andmechanical assist tower or be the full heightand depth of upright.
SAFETY FEATURES9.0 All carriages can be equipped with asafety parking brake.
9.1 Carriage end stops will be provided forsystems without stationary units.
9.2 A safety spacing is provided between endpanels through the use of 1" carriagebumpers; protects fingers of those using thesystem and provides a positive stop for allcarriages.
ATTACHMENT OF SHELVING10.0 Carriage construction shall be designedto allow all shelving types to be securelyanchored to the carriages. Shelving to besecured to the carriage with tek screwsprovided.
SYSTEM ACCESSORIES / OPTIONS11.0 Optional security key lock systems tosecure one carriage or entire system.
11.1 Back panels (for stationary units), endcaps and misc. finishing pieces are available.
QUALITY CONTROL12.0 Systems are checked at the factory toensure high quality and uninterrupted fieldinstallation.
12.1 All parts and fasteners are provided toensure proper and safe installation.
12.2 All mobile systems are to be installedby trained technicians.
INSTALLATION STANDARDS13.0 Install, level and grout tracks directly toa properly prepared floor.
13.1 Install carriages, end panels (ifapplicable) and shelving as shown on thedrawings, complete and ready for owner use.
CLEAN UP & DOCUMENTATION14.0 All debris and excess materialsresulting from installation shall be removedand the construction area left in a broomclean condition.
Additional Operators Manuals are availableupon request.
DATE: OCTOBER 1, 2003SPECIFICATIONS ARE SUBJECT TO CHANGE
by American Filing Solutions
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
SECTION: Mobile Aisle Specifications page 3
PRO®
Mobile Systems Quik-Spec Specifications1000 lb. HP5 Mechanical Assist Carriage
T-TRACK1.0 Rail to be 1/2" wide x 3/4" high # 1018cold rolled steel rail positioned in 6063T56“T” aluminum extrusion. Rail to be machinedon all sides.
1.1 Each track to have a minimum basewidth of 3".
1.2 Leveling screws provided to ensureproper leveling for smooth operation.
1.3 Track is secured to the floor with rawltype anchors (supplied) and grouted in place
1.4 Track sections designed with tongue andgroove lap connections between each rail jointproviding a smooth rail surface for ease ofcarriage operation.
1.5 Rail and trough drawings are availablefor optional recessed rail installation to makesystem level with the existing floor ifrequired.
1.6 The space between the rail and thealuminum housing will be filled with aneoprene material to prevent debris fromaffecting carriage movement.
1.7 C-Track, Low-Pro Track and Anti-TipTrack also available. Consult customersupport for specifications.
RAISED FLOOR DECK2.0 Standard elevated deck constructed of3/4" plywood. Flame retardant decking is anoption.
2.1 Decking shall support a minimum of250 lbs. per square foot.
2.2 Decking to be installed flush and tightto the track.
2.3 Deck to be installed in a manner thatwill prevent warping, deformation andmovement during normal use and operation.
2.4 Deck may be covered with floorcovering as specified by the end user.
RAMPS3.0 Beveled ramp grade shall be ADAcompliant.
3.1 Ramps constructed of 3/4" plywood in14", 18", or 24" width as determined bycarriage length.
CARRIAGE4.0 Welded steel construction; carriage sidemembers consist of a 5", 12 gauge C-channeldesign, capable of supporting minimum 1,000lbs. per linear carriage foot.
4.1 Fixed carriages shall be of sameconstruction and height as movable carriagesand anchored to the rails for a complete,homogeneous system.
4.2 Necessary carriage splices shall be abolted type to maintain proper unit alignment
4.3 Carriage cross members are 12 gauge,welded U-shaped steel channels with extrareinforcement when specified for X-Rayshelving.
4.4 Carriage construction to allow shelvingto be securely anchored to the carriages.
WHEELS5.0 All wheels to be a minimum of 5" indiameter, double flanged as required,precision ground, balanced and constructedfrom solid steel for smooth operation.
5.1 Each drive wheel will be fitted with twopermanently sealed and shielded bearingshoused in a self-aligning flanged pillow blockhaving a dynamic load rating of 2,200 lbs. perbearing.
5.2 A minimum of four guide wheels isrequired per movable carriage.
DRIVE SYSTEM6.0 All mobile carriages shall be fitted withfull length drive shafts.
6.1 All drive shafts shall be a minimum of11/8" hollow steel tubing and connect allwheels on drive side of carriage. All axles shallbe solid steel and support the full load ofbearings.
6.2 Complete drive shaft /axle and wheelassemblies shall be secured by means of amechanically retained coupling methodeliminating any loose connections betweenshafts and axles and shall exhibit no play orlooseness through the length of carriage.
6.3 The mechanical assist handle shall be ofergonomic design. The transfer of powerfrom the handle to the drive shaft shall bedirect drive and chain driven.
6.4 All mechanical assist systems are to bemoved by means of a chain and sprocketreduction drive system.
6.5 Mechanical assist tower attaching pointsshall be created using a CAM/CNC methodto provide precise alignment for attachmentto the carriage.
6.6 Dual control options are available foroperation of mobile carriages from either orboth ends.
6.7 All mechanical assist systems areequipped with a push-pull safety parkingbrake as a standard feature.
DRIVE EFFORT7.0 Gear ratio to be determined by carriagelength and weight; factory calculates correctdrive effort for each system consideringlength, weight loads and number of carriagesto be moved.
7.1 There shall be no “play” in the drivehandle and the carriage shall stop withoutdrifting when operation of the actuator isterminated on all leveled systems.
END PANELS8.0 All optional end panels are to be the fullheight and depth of the shelving ends pluscarriage height.
8.1 Melamine or high pressure laminatecovered end panels to be 3/4" in thickness.
8.2 Optional laminates are available uponcustomer request.
8.3 Steel chain covers or end panels may besupplied as specified. They shall cover onlythe exposed chain drive mechanism andmechanical assist tower or be the full heightand depth of upright.
SAFETY FEATURES9.0 All carriages are equipped with a safetyparking brake
9.1 Carriage end stops will be provided forsystems without stationary units.
9.2 A safety spacing is provided betweenend panels through the use of 1" carriagebumpers; protects fingers of those using thesystem and provides a positive stop for allcarriages.
ATTACHMENT OF SHELVING10.0 Carriage construction shall be designedto allow all shelving types to be securelyanchored to the carriages. Shelving to besecured to the carriage with (enclosed) specialtek screws
SYSTEM ACCESSORIES / OPTIONS11.0 Optional security key lock to secure onecarriage or entire system.
11.1 Back panels (for stationary units), endcaps and misc. finishing pieces are available.
11.2 Optional label holders show aislecontents.
QUALITY CONTROL12.0 Systems are checked at the factory toensure high quality and an uninterrupted fieldinstallation.
12.1 All parts and fasteners are provided toensure proper and safe installation.
12.2 All mobile systems are to be installedby trained technicians.
INSTALLATION STANDARDS13.0 Install, level and grout tracks directlyto a properly prepared floor.
13.1 Install carriages, end panels (ifapplicable) and shelving as shown on thedrawings, complete and ready for owner use.
CLEAN UP & DOCUMENTATION14.0 All debris and excess materialsresulting from installation shall be removedand the construction area left in a broomclean condition.
Additional Operator Manuals are availableupon request.
DATE: OCTOBER 1, 2003SPECIFICATIONS ARESUBJECT TO CHANGE
by American Filing Solutions
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
SECTION: Mobile Aisle Specifications page 4
PRO®by American Filing Solutions
5"
3" 3"
TIT
LE
:C
AR
RIA
GE
SA
DD
LE
PR
OFI
LE
S
RE
VIS
ION
:00
FIL
E:
CA
RR
IAG
E P
RO
FIL
ES.
DW
G
SCA
LE
:
04/1
7/20
01D
AT
E:
DR
AW
N B
Y:
NO
NE
ME
D
HP5
MA
NU
AL
MO
BIL
E A
ISL
E
LP3
AN
TI-
TIP
BR
AC
KE
T
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
SECTION: Mobile Aisle Specifications page 5
PRO®by American Filing Solutions
5 8"
1 2"
31 2"
AL
UM
INU
ME
XT
RU
SIO
N
CO
LD
RO
LL
ED
FL
AT
ST
EE
L R
AIL
1 2"
x 1 2"
TIT
LE
:C
TR
AC
K
RE
VIS
ION
:00
FIL
E:
5718
DL
.DW
G
SCA
LE
:
04/0
9/20
01D
AT
E:
DR
AW
N B
Y:
NO
NE
ME
D
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
SECTION: Mobile Aisle Specifications page 6
PRO®by American Filing Solutions
5 8"
1 2"3"
41 8"
TIT
LE
:60
01D
L -
C T
RA
CK
WIT
H 3
" W
HE
EL
S
RE
VIS
ION
:00
FIL
E:
6001
DL
-C.D
WG
SCA
LE
:
04/0
9/20
01D
AT
E:
DR
AW
N B
Y:
NO
NE
ME
D
3" C
arri
age
Man
ual M
obile
and
Lat
eral
Car
riag
es a
fter
4/1
5/03
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
SECTION: Mobile Aisle Specifications page 7
PRO®
5 8"
1 2"3"
41 8"
TIT
LE
:60
02D
L -
LP3
CA
RR
IAG
E -
C T
RA
CK
RE
VIS
ION
:00
FIL
E:
6002
DL
-C.D
WG
SCA
LE
:
04/0
9/20
01D
AT
E:
DR
AW
N B
Y:
NO
NE
ME
D
Mec
hani
cal A
ssis
t L
P3
Car
riag
e
by American Filing Solutions
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
SECTION: Mobile Aisle Specifications page 8
PRO®
5 8"
7 9 16
"
FLU
SH F
LO
OR
IN
SER
T
FOR
ME
D S
TE
EL
CO
LD
RO
LL
ED
FL
AT
ST
EE
L R
AIL
1/2
" x
1/2" T
ITL
E:
LO
W P
RO
TR
AC
K RE
VIS
ION
:00
FIL
E:
5717
DL
.DW
G
SCA
LE
:
04/0
8/20
01D
AT
E:
DR
AW
N B
Y:
NO
NE
ME
D
by American Filing Solutions
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
SECTION: Mobile Aisle Specifications page 9
PRO®
1 2"
1 2"3"
4"
TIT
LE
:60
01D
L -
LO
W-P
RO
TR
AC
K W
ITH
3"
WH
EE
LS
RE
VIS
ION
:00
FIL
E:
6001
DL
-L.D
WG
SCA
LE
:
04/0
8/20
01D
AT
E:
DR
AW
N B
Y:
NO
NE
ME
D
Man
ual M
obile
by American Filing Solutions
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
SECTION: Mobile Aisle Specifications page 10
PRO®
1 2"
1 2"3"
4"
TIT
LE
:60
02D
L -
LP3
CA
RR
IAG
E -
LO
W-P
RO
TR
AC
K
RE
VIS
ION
:00
FIL
E:
6002
DL
-L.D
WG
SCA
LE
:
04/0
8/20
01D
AT
E:
DR
AW
N B
Y:
NO
NE
ME
D
Mec
hani
cal A
ssis
t L
P3
Car
riag
e
by American Filing Solutions
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
SECTION: Mobile Aisle Specifications page 11
PRO®
TO
NG
UE
& G
RO
OV
E C
ON
NE
CT
ION
/M
EC
HA
NIC
AL
LY
FA
STE
NE
D
1/4"
TH
RE
AD
ED
LE
VE
LIN
G H
OL
ES
1/4"
AN
CH
OR
HO
LE
S8
AN
CH
OR
S PE
R 8
' TR
AC
K
GR
OU
T A
SR
EQ
UIR
ED
1 2"
17 16
"
3 4"
11 4"
FLU
SH F
LO
OR
IN
SER
T
CO
LD
RO
LL
ED
ST
EE
L R
AIL
1/2
" x
3/4"
SLE
EV
E A
NC
HO
RS
TIT
LE
:T
-TR
AC
K W
ITH
GR
OU
T A
ND
AN
CH
OR
S
RE
VIS
ION
:01
FIL
E:
5711
DL
.DW
G
SCA
LE
:
02/0
7/20
02D
AT
E:
DR
AW
N B
Y:
NO
NE
ME
D
GR
OU
TD
EPT
HPLU
SG
RO
UT
DE
PTH
by American Filing Solutions
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
SECTION: Mobile Aisle Specifications page 12
PRO®
TITL
E:60
03D
L - L
P3 C
AR
RIA
GE
- T T
RA
CK
WIT
H G
RO
UT
RE
VIS
ION
:00
FIL
E:
6003
DL
.DW
G
SCA
LE
:
04/1
7/20
01D
AT
E:
DR
AW
N B
Y:
NO
NE
ME
D
3"
1-1/
4"
GR
OU
T D
EPT
H
3"
CA
RR
IAG
E
WH
EE
L FLU
SH
FLO
OR
IN
SER
T
CA
RPE
T
DE
CK
TR
AC
K H
OU
SIN
G
GR
OU
T A
S R
EQ
UIR
ED
4 -3/
4"PL
US
GR
OU
TD
EPT
H
T-T
RA
CK
PR
OFI
LE
4-3/
4"PL
US
GR
OU
TD
EPT
H
1-1/
4"
1/2"
1/2"
3"
GR
OU
T D
EPT
H
4-1/
2"
CA
RR
IAG
E
WH
EE
L
FLU
SH F
LO
OR
IN
SER
T
CA
RPE
T
DE
CK
TR
AC
K H
OU
SIN
GG
RO
UT
AS
RE
QU
IRE
D
1/4"
1/2"
AN
TI-
TIP
TR
AC
K P
RO
FIL
E
by American Filing Solutions
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
SECTION: Mobile Aisle Specifications page 13
PRO®
GR
OU
T D
EPT
H
1 1 4"
1"5"
7 1 4"
3"
CA
RR
IAG
E
FLU
SH F
LO
OR
IN
SER
T
CA
RPE
T
DE
CK
TR
AC
K H
OU
SIN
GG
RO
UT
AS
RE
QU
IRE
D
TITL
E:60
04D
L - H
P5 C
AR
RIA
GE
- T T
RA
CK
WIT
H G
RO
UT
RE
VIS
ION
:00
FIL
E:
6004
DL
.DW
G
SCA
LE
:
04/0
9/20
01D
AT
E:
DR
AW
N B
Y:
NO
NE
ME
D
PLU
S G
RO
UT
D
EPT
H
AN
TI-
TIP
TR
AC
K P
RO
FIL
ET
-TR
AC
K P
RO
FIL
E
1/4"
1/2"
GR
OU
T D
EPT
H
1 1 4"
1"5"
7 1 4"
3"
CA
RR
IAG
E
FLU
SH F
LO
OR
IN
SER
T
CA
RPE
T
DE
CK
TR
AC
K H
OU
SIN
GG
RO
UT
AS
RE
QU
IRE
D
PLU
S G
RO
UT
D
EPT
H
by American Filing Solutions
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
SECTION: Mobile Aisle Specifications page 14
PRO®
GR
OU
T
BA
CK
FIL
LB
AC
K F
ILL
FLO
OR
ING
SU
RFA
CE
(CA
RPE
T, T
ILE
, ET
C.)
T-T
RA
CK
8"
MIN
IMU
M T
RO
UG
H W
IDT
H
GR
OU
T A
SR
EQ
UIR
ED
AL
LO
WA
NC
E F
OR
FIN
ISH
ED
FLO
OR
CO
VE
RIN
G T
HIC
KN
ESS
11 4"
TIT
LE
:T
TR
AC
K I
N C
ON
CR
ET
E
RE
VIS
ION
:00
FIL
E:
6012
DL
.DW
G
SCA
LE
:
04/0
9/20
01D
AT
E:
DR
AW
N B
Y:
NO
NE
ME
D
FLO
OR
CO
VE
RIN
G T
HIC
KN
ESS
T-T
RA
CK
1 1/
4" +
GR
OU
TN
ON
E
1" +
GR
OU
T1/
4"
7/8"
+ G
RO
UT
3/8"
3/4"
+ G
RO
UT
1/2"
AN
TI-
TIP
TR
AC
K 1
0" M
INIM
UM
TR
OU
GH
WID
TH
MIN
IMU
M T
RO
UG
H D
EPT
H
AN
TI-
TIP
TR
AC
K
1 1/
2" +
GR
OU
T
1 1/
4" +
GR
OU
T
1 1/
8" +
GR
OU
T
1" +
GR
OU
T
by American Filing Solutions
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
SECTION: Mobile Aisle Specifications page 15
PRO®
WH
EE
LC
HA
NN
EL
DR
IVE
SHA
FT
CH
AIN
DR
IVE
ASS
EM
BL
Y
SID
E R
AIL
PIL
LO
W B
LO
CK
BE
AR
ING
S
TIT
LE
:L
P3 C
AR
RIA
GE R
EV
ISIO
N:
00FI
LE
:70
04D
L.D
WG
SCA
LE
:
04/0
8/20
01D
AT
E:
DR
AW
N B
Y:
NO
NE
ME
D
3"
by American Filing Solutions
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
SECTION: Mobile Aisle Specifications page 16
PRO®
CH
AIN
DR
IVE
ASS
EM
BL
Y
DR
IVE
SH
AFT
WH
EE
LC
HA
NN
EL
PIL
LO
W B
LO
CK
BE
AR
ING
S
TIT
LE
:H
P5 C
AR
RIA
GE R
EV
ISIO
N:
00FI
LE
:70
05D
L.D
WG
SCA
LE
:
04/0
8/20
01D
AT
E:
DR
AW
N B
Y:
NO
NE
ME
D
5"
by American Filing Solutions
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com
SECTION: Mobile Aisle Specifications page 17
PRO®
CH
AIN
TIG
HT
EN
ER
CH
AIN
CR
OSS
CH
AN
NE
L W
HE
EL
BR
AC
E
EN
D P
AN
EL
HA
ND
LE
ASS
EM
BL
Y
DR
IVE
SH
AFT
TIT
LE
:E
ND
PA
NE
L A
SSE
MB
LY
PR
OFI
LE
RE
VIS
ION
:00
FIL
E:
7001
DL
.DW
G
SCA
LE
:
04/0
8/20
01D
AT
E:
DR
AW
N B
Y:
NO
NE
ME
D
by American Filing Solutions
American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com