HIGH AND LOW PRESSURE COMPRESSORS FOR PURE BREATHING AIR...
Transcript of HIGH AND LOW PRESSURE COMPRESSORS FOR PURE BREATHING AIR...
HIGH AND LOW PRESSURE COMPRESSORS FOR PURE BREATHING AIR AND TECHNICAL GASES
MCH-6 PORTABLE COMPRESSORS
1
Coltri compressors are manufactured at our production
plant in Italy.Production departments are equipped with robots and totally computerized
CNC lathes.
3
MCH-6PUMPING UNIT
1st STAGE carbon fibres reed valve
2nd - 3rd STAGE tempered disc pressure valve, hardened valve seat, copper gasket
1st STAGE needle bearing light alloy conrod
3rd STAGE tempered steel cylinder and piston, honing coupling, carbon graphite piston rings
4th STAGE tempered chrome-steelcylinder and piston honing-coupling
2nd - 3rd STAGE die cast aluminum head, high efficiency compression chamber
3
4
Aluminium crankcase, machined on high tech CNC
Stainless steel intercoolers and aftercoolers
2nd STAGE Splash lubrication conrod
Tempered steel crankshaft rotating on 3 Heavy Duty ball bearing
SAFETY VALVE 250 bar Code 6-05-015/250300 bar Code 6-05-015/300330 bar Code 6-05-015/330
SAFETY VALVE 200 bar Code 6-05-015/200225 bar Code 6-05-015
MCH-6/SH
5
MCH-6/SH WITH RED FRAME
Code SC000100/R/R
MCH-6/SH WITH BLUE FRAME
Code SC000100/R/B
MCH-6 WITH STAINLESS STEEL FRAME
Code SC000100/I
AUTOSTOP
Code SC000521
DIGITAL HOUR-TACHO METER
Code 13-04-0210
Driven by Honda petrol engine QXD4 model, certified CARB III and EPA2-EURO2
100 L / min - 6 m3 / h - 3,5 CFM charging rate
Filling time cylinder 10 L - 0-200 bar in 20 min
Working pressure 200 bar/3000 psi - 225 bar/3200 psi - 300 bar/4300 psi - 330 bar/4700 psi
2800 rpm pumping unit
Power 3,6 Kw / 5,5 HP @ 3600 rpm
Fuel unleaded petrol
Fuel tank capacity 3,6 L / 3.8 quarts
Fuel consuption 0,987 L / h - 1.04 quarts/hour
Dimensions height 35 cm / 13.7”, width 78 cm / 30.7”, depth 32 cm / 12.5”
Dry weight 37 Kg / 81.5 lbs
100,5 LWA noise power 80,5 dB noise pressure
4 stages and cylinders
Lubricating oil capacity 300 cc (0,3 L) / 10 FL.OZ.
Lubricant Coltri Oil CE 750
Frame powder coated steel
Oil/moisture separator after last stage with vortex generator
Filter cartridge with activated carbon and molecular sieve
Safety valve on the separator housing 200-225-300-330 bar Stainless steel interstage coolers and after coolers
2 micron paper suction filter EN 12021 CGA E breathing air
OPTIONAL ACCESSORIES
FEATURES
6
Muffler
Air filter withactivated carbon and molecular sieve
Pressure gauge
Intake air filter
Starting
Separator housing
Condensate drain
Cooling fan
Filling connection(see page 26)
7
Driven by Honda petrol engine QXD9 model, certified CARB III and EPA2-EURO2
100 L / min - 6 m3 / h - 3,5 CFM charging rate
Filling time cylinder 10 L - 0-200 bar in 20 min
Working pressure 200 bar/3000 psi - 225 bar/3200 psi - 300 bar/4300 psi - 330 bar/4700 psi
2800 rpm pumping unit
Power 3,6 Kw / 5,5 HP @ 3600 rpm
Fuel unleaded petrol
Fuel tank capacity 3,6 L / 3.8 quarts
Fuel consuption 0,987 L / h - 1.04 quarts/hour
Dimensions height 35 cm / 13.7”, width 78 cm / 30.7”, depth 32 cm / 12.5”
Dry weight 38,5 Kg / 84.8 lbs
96,9 LWA noise power 76,8 dB noise pressure
4 stages and cylinders
Lubricating oil capacity 300 cc (0,3 L) / 10 FL.OZ.
Lubricant Coltri Oil CE 750
Frame powder coated steel
Oil/moisture separator after last stage with vortex generator
Filter cartridge with activated carbon and molecular sieve
Safety valve on the separator housing 200-225-300-330 bar Stainless steel interstage coolers and after coolers
2 micron paper suction filter EN 12021 CGA E breathing air
OPTIONAL ACCESSORIES
FEATURESMCH-6/SH EU
MCH-6/SH EU WITH RED FRAME
Code SC000100/EU/R/R
MCH-6/SH EU WITH BLUE FRAME
Code SC000100/EU/R/B
MCH-6/SH EU WITH STAINLESS STEEL FRAME
Code SC000100/EU/I
AUTOSTOP
Code SC000521
DIGITAL HOUR-TACHO METER
Code 13-04-0210
8
Muffler
Air filter withactivated carbon and molecular sieve
Pressure gauge
Intake air filter
Starting
Separator housing
Silencer
Condensate drain
Cooling fan
Filling connection(see page 26)
9
Driven by Honda petrol engine QXD4 model, certified CARB III and EPA2-EURO2 100 L / min - 6 m3 / h - 3,5 CFM charging rate
Filling time cylinder 10 L - 0-200 bar in 20 min
Working pressure 200 bar/3000 psi - 225 bar/3200 psi - 300 bar/4300 psi - 330 bar/4700 psi
2800 rpm pumping unit
Power 3,6 Kw / 5,5 HP @ 3600 rpm
Fuel unleaded petrol
Fuel tank capacity 3,6 L / 3.8 quarts
Fuel consuption 0,987 L / h - 1.04 quarts/hour
Dimensions height 47 cm / 18.5”, width 73 cm / 28.7”, depth 37 cm / 14.5”
Dry weight 47,3 Kg / 104 lbs
100,5 LWA noise power 80,5 dB noise pressure
4 stages and cylinders
Lubricating oil capacity 300 cc (0,3 L) / 10 FL.OZ.
Lubricant Coltri Oil CE 750
Frame powder coated steel
Oil/moisture separator after last stage with vortex generator
Filter cartridge with activated carbon and molecular sieve
Safety valve on the separator housing 200-225-300-330 bar Stainless steel interstage coolers and after coolers
2 micron paper suction filter EN 12021 CGA E breathing air
OPTIONAL ACCESSORIES
FEATURESMCH-6/SH COMPACT
MCH-6/SH COMPACT WITH BLUE FRAME
Code SC000100/COMP
MCH-6/SH COMPACT WITH STAINLESS STEEL FRAME
Code SC000100/COMP/I
AUTOSTOP
Code SC000521
DIGITAL HOUR-TACHOMETER
Code 13-04-0210
10
Muffler
Cooling fan
Pressure gauge
Air filter withactivated carbon and molecular sieve
Separator housing
Condensate drain
Condensate drain
Filling connection(see page 26)
11
Driven by Honda petrol engine QXD9 model, certified CARB III and EPA2-EURO2 100 L / min - 6 m3 / h - 3,5 CFM charging rate
Filling time cylinder 10 L - 0-200 bar in 20 min
Working pressure 200 bar/3000 psi - 225 bar/3200 psi - 300 bar/4300 psi - 330 bar/4700 psi
2800 rpm pumping unit
Power 3,6 Kw / 5,5 HP @ 3600 rpm
Fuel unleaded petrol
Fuel tank capacity 3,6 L / 3.8 quarts
Fuel consuption 0,987 L / h - 1.04 quarts/hour
Dimensions height 47 cm / 18.5”, width 73 cm / 28.7”, depth 37 cm / 14.5”
Dry weight 48,8 Kg / 107.7 lbs
96,9 LWA noise power 76,8 dB noise pressure
4 stages and cylinders
Lubricating oil capacity 300 cc (0,3 L) / 10 FL.OZ.
Lubricant Coltri Oil CE 750
Frame powder coated steel
Oil/moisture separator after last stage with vortex generator
Filter cartridge with activated carbon and molecular sieve
Safety valve on the separator housing 200-225-300-330 bar Stainless steel interstage coolers and after coolers
2 micron paper suction filter EN 12021 CGA E breathing air
OPTIONAL ACCESSORIES
FEATURESMCH-6/SH EU COMPACT
MCH-6/SH EU COMPACT WITH BLUE FRAME
Code SC000100/EU/COMP
MCH-6/SH EU COMPACT WITH STAINLESS STEEL FRAME
Code SC000100/EU/COMP/I
AUTOSTOP
Code SC000521
DIGITAL HOUR-TACHOMETER
Code 13-04-0210
12
Muffler
Pressure gauge
Cooling fan
Air filter withactivated carbonand molecular sieve
Separator housing
Condensate drain
Condensate drain
Silencer
Filling connection(see page 26)
MCH-6/EM
13
Driven by single-phase electric motor with centrifugal switch
80 L / min - 4,8 m3 / h - 2,8 CFM charging rate
Filling time cylinder 10 L - 0-200 bar in 25 min
Working pressure 200 bar/3000 psi - 225 bar/3200 psi - 300 bar/4300 psi - 330 bar/4700 psi
2240 rpm pumping unit
Power 2,2 Kw
*14 A (230 V - 50/60 Hz) **29 A (115 V - 60 Hz) full load Amp
Dimensions height 35 cm / 13.7”, width 65 cm / 25.5”, depth 39 cm / 15.3”
Dry weight 39,5 Kg / 87 lbs
81,7 dB noise pressure
4 stages and cylinders
Lubricating oil capacity 300 cc (0,3 L) / 10 FL.OZ.
Lubricant Coltri Oil CE 750
Frame powder coated steel
Oil/moisture separator after last stage with vortex generator
Filter cartridge with activated carbon and molecular sieve
Safety valve on the separator housing 200-225-300-330 bar Stainless steel interstage coolers and after coolers
2 micron paper suction filter EN 12021 CGA E breathing air
Information for onboard use with electric generator starting load Ampere *42 A **87 A
Generator power @ starting (without pressure) 4 KVA
OPTIONAL ACCESSORIES
FEATURES
MCH-6/EM WITH RED FRAMECode SC000120/R for 230 V - 50 HzCode SC000121/R for 230 V - 60 HzCode SC000122/R for 115 V - 60 Hz
MCH-6/EM WITH BLUE FRAMECode SC000120/B for 230 V - 50 HzCode SC000121/B for 230 V - 60 HzCode SC000122/B for 115 V - 60 Hz
MCH-6/EM WITH STAINLESS STEEL FRAMECode SC000120/I for 230 V - 50 HzCode SC000121/I for 230 V - 60 HzCode SC000122/I for 115 V - 60 Hz
AUTOSTOP
Code SC000521
AUTODRAIN WITH TIMER
Code SC000522
A
B
A B+AUTOSTOP AUTODRAIN WITH TIMERCode SC000523
14
Air filter withactivated carbon and molecular sieve
Pressure gauge
Intake air filter
Start and stop
Separator housing
Condensate drain
Cooling fan
Filling connection(see page 26)
MCH-6/EMSTAINLESS STEELWITH AUTOMATED
EQUIPMENTS
15
Driven by single-phase electric motor with centrifugal switch
80 L / min - 4,8 m3 / h - 2,8 CFM charging rate
Filling time cylinder 10 L - 0-200 bar in 25 min
Working pressure 200 bar/3000 psi - 225 bar/3200 psi - 300 bar/4300 psi - 330 bar/4700 psi
2240 rpm pumping unit
Power 2,2 Kw
*14 A (230 V - 50/60 Hz) **29 A (115 V - 60 Hz) full load Amp
Dimensions height 35 cm / 13.7”, width 65 cm / 25.5”, depth 39 cm / 15.3”
Dry weight 41 Kg / 90.3 lbs
81,7 dB noise pressure
4 stages and cylinders
Lubricating oil capacity 300 cc (0,3 L) / 10 FL.OZ.
Lubricant Coltri Oil CE 750
Frame powder coated steel
Oil/moisture separator after last stage with vortex generator
Filter cartridge with activated carbon and molecular sieve
Safety valve on the separator housing 200-225-300-330 bar Stainless steel interstage coolers and after coolers
2 micron paper suction filter EN 12021 CGA E breathing air
Information for onboard use with electric generator starting load Ampere *42 A **87 A
Generator power @ starting (without pressure) 4 KVA
FEATURES
MCH-6/EM STAINLESS STEEL WITH AUTOSTOP + AUTODRAIN WITH TIMERCode SC000120/I+SC000521+SC000522 for 230V-50HzCode SC000121/I+SC000521+SC000522 for 230V-60HzCode SC000122/I+SC000521+SC000522 for 115V-60Hz
AUTOSTOP Code SC000521
AUTODRAIN WITH TIMER Code SC000522
SEPARATE AUTOMATED EQUIPMENTS
16
Autostop
Pressure gauge
Air filter withactivated carbon and molecular sieve
Intake air filter
Start and stop
Separator housing
Autodrain with timer
Condensate drain
Cooling fan
MCH-6/EM COMPACT
17
Driven by single-phase electric motor with centrifugal switch
Power/chargin rate 2,2 Kw (80 L / min - 4,8 m3/h - 2,8 CFM) or 3 Kw (100 L / min - 6 m3/h - 3,5 CFM)
Filling time cylinder 10 L - 0-200 bar 25 min (2,2 Kw - 80 L / min - 4,8 m3 / h - 2,8 CFM) or20 min (3 Kw - 100 L / min - 6 m3 / h - 3,5 CFM)
Working pressure 2,2 Kw 225 bar / 3300 psi or 3 Kw 300 bar / 4300 psi
2240 rpm pumping unit for 2,2 Kw or 2800 rpm for 3 Kw pumping unit
*2,2 Kw - 14 A (230 V - 50/60 Hz) **29 A (115 V - 60 Hz) 3 Kw - 18 A (230 V - 50 / 60 Hz) full load Amp
Dimensions height 47 cm / 18.5”, width 73 cm / 28.7”, depth 37 cm / 14.5”
Dry weight 57,1 Kg / 126 lbs (2,2 Kw - 80 L / min - 4,8 m3 / h - 2,8 CFM) or62 Kg / 136.6 lbs (3 Kw - 100 L / min - 6 m3 / h - 3,5 CFM)
81,7 dB noise pressure
4 stages and cylinders
Lubricating oil capacity 300 cc (0,3 L) / 10 FL.OZ.
Lubricant Coltri Oil CE 750
Frame powder coated steel
Oil/moisture separator after last stage with vortex generator
Filter cartridge with activated carbon and molecular sieve
Safety valve on the separator housing 225-300-330 bar Stainless steel interstage coolers and after coolers
2 micron paper suction filter EN 12021 CGA E breathing air
Information for onboard use with electric generator starting load Ampere *42 A **87 A
Generator power @ starting (without pressure) 4 KVA for 2.2 Kw motor
OPTIONAL ACCESSORIES
FEATURES
MCH-6/EM COMPACT WITH BLUE FRAMECode SC000120/COMP for 230 V - 50 Hz - 2,2 KwCode SC000121/COMP for 230 V - 60 Hz - 2,2 KwCode SC000122/COMP for 115 V - 60 Hz - 2,2 KwCode SC000120/COMP/S for 230 V - 50 Hz - 3 KwCode SC000121/COMP/S for 230 V - 60 Hz - 3 Kw
MCH-6/EM COMPACT WITH STAINLESS STEEL FRAMECode SC000120/COMP/I for 230 V - 50 HzCode SC000121/COMP/I for 230 V - 60 HzCode SC000122/COMP/I for 115 V - 60 Hz
AUTOSTOPCode SC000521
AUTODRAIN WITH TIMERCode SC000522
REDUCER 300/200 barCode SC000531
AB
+AUTOSTOP AUTODRAIN WITH TIMER Code SC000523
A
B
18
Starting
Pressure gauge
Cooling fan
Air filter withactivated carbon and molecular sieve
Separator housing
Condensate drain
Condensate drain
Filling connection(see page 26)
MCH-6/ET
19
Driven by three-phase electric motor
100 L / min - 6 m3 / h - 3,5 CFM charging rate
Filling time cylinder 10 L - 0-200 bar in 20 min
Working pressure 200 bar/3000 psi - 225 bar/3200 psi - 300 bar/4300 psi - 330 bar/4700 psi
Power 3 Kw
2800 RPM pumping unit
11,5 A (230 V - 50/60 Hz) 6,7 A (400 V - 50/60 Hz) full load Amp
Dimensions height 35 cm / 13.7”, width 65 cm / 25.5”, depth 39 cm / 15.3”
Dry weight 39 Kg / 85 lbs
83 dB noise pressure
4 stages and cylinders
Lubricating oil capacity 300 cc (0,3 L) / 10 FL.OZ.
Lubricant Coltri Oil CE 750
Frame powder coated steel
Oil/moisture separator after last stage with vortex generator
Filter cartridge with activated carbon and molecular sieve
Safety valve on the separator housing 200-225-300-330 bar Stainless steel interstage coolers and after coolers
2 micron paper suction filter EN 12021 CGA E breathing air
OPTIONAL ACCESSORIES
FEATURES
A
B
A B+AUTOSTOP AUTODRAIN WITH TIMERCode SC000523
MCH-6/ET WITH RED FRAMECode SC000131/R for 230 V - 50 HzCode SC000132/R for 230 V - 60 HzCode SC000130/R for 400 V - 50 HzCode SC000133/R for 440 V - 60 Hz
MCH-6/ET WITH BLUE FRAMECode SC000131/B for 230 V - 50 HzCode SC000132/B for 230 V - 60 HzCode SC000130/B for 400 V - 50 HzCode SC000133/B for 440 V - 60 Hz
MCH-6/ET WITH STAINLESS STEEL FRAMECode SC000131/I for 230 V - 50/60 HzCode SC000130/I for 400/440 V - 50/60 Hz
AUTOSTOP
Code SC000521
AUTODRAIN WITH TIMER
Code SC000522
20
Start and stop
Air filter withactivated carbon and molecular sieve
Intake air filter
Pressure gauge
Separator housing
Condensate drain
Cooling fan
Filling connection(see page 26)
MCH-6/ET COMPACT
21
OPTIONAL ACCESSORIES
MCH-6/ET COMPACT WITH BLUE FRAMECode SC000131COMP for 230 V - 50 HzCode SC000132COMP for 230 V - 60 HzCode SC000130COMP for 400 V - 50 HzCode SC000133COMP for 440 V - 60 Hz
MCH-6/ET COMPACT WITH STAINLESS STEEL FRAMECode SC000131/COMP/I for 230 V - 50/60 HzCode SC000130/COMP/I for 400/440 V - 50/60 Hz
AUTOSTOPCode SC000521
AUTODRAIN WITH TIMERCode SC000522
REDUCER 300/200 barCode SC000531
AB
+AUTOSTOP AUTODRAIN WITH TIMER Code SC000523
A
B
Driven by three-phase electric motor
100 L / min - 6 m3 / h - 3,5 CFM charging rate
Filling time cylinder 10 L - 0-200 bar in 20 min
Working pressure 225 bar / 3300 psi or 300 bar / 4300 psi
Power 3 Kw
2800 RPM pumping unit
11,5 A (230 V - 50/60 Hz) 6,7 A (400 V - 50/60 Hz) full load Amp
Dimensions height 47 cm / 18.5”, width 73 cm / 28.7”, depth 37 cm / 14.5”
Dry weight 56,7 Kg / 125 lbs
83 dB noise pressure
4 stages and cylinders
Lubricating oil capacity 300 cc (0,3 L) / 10 FL.OZ.
Lubricant Coltri Oil CE 750
Frame powder coated steel
Oil/moisture separator after last stage with vortex generator
Filter cartridge with activated carbon and molecular sieve
Safety valve on the separator housing 225-300-330 bar Stainless steel interstage coolers and after coolers
2 micron paper suction filter EN 12021 CGA E breathing air
FEATURES
22
Cooling fan
Pressure gauge
Starting
Air filter withactivated carbon and molecular sieve
Condensate drain
Separator housing
Condensate drain
Filling connection(see page 26)
MCH-6/EM SILENTMCH-6/ET SILENT
23
Driven by single-phase or three-phase electric motor
MCH-6/EM SILENT 80 L / min - 4,8 m3 / h - 2,8 CFM charging rate
MCH-6/ET SILENT 100 L / min - 6 m3 / h - 3,5 CFM charging rate
MCH-6/EM SILENT filling time cylinder 10 L - 0-200 bar in 25 min
MCH-6/ET SILENT filling time cylinder 10 L - 0-200 bar in 20 min
Working pressure 200 bar/3000 psi - 225 bar/3200 psi - 300 bar/4300 psi - 330 bar/4700 psi
MCH-6/EM SILENT power 2,2 Kw MCH-6/ET SILENT power 3 Kw
MCH-6/EM SILENT *14 A (230 V - 50/60 Hz) **29 A (115 V - 60 Hz) full load Amp
MCH-6/ET SILENT 11,5 A (230 V - 50/60 Hz) 6,7 A (400 V - 50/60 Hz) full load Amp
Dimensions height 84 cm / 33”, width 66 cm / 26”, depth 50 cm / 19.7”
Dry weight 84,5 Kg / 186.3 lbs
66 dB noise pressure
4 stages and cylinders
Lubricating oil capacity 300 cc (0,3 L) / 10 FL.OZ.
Lubricant Coltri Oil CE 750
Frame powder coated steel
Oil/moisture separator after last stage with vortex generator
Filter cartridge with activated carbon and molecular sieve
Safety valve on the separator housing 200-225-300-330 bar Stainless steel interstage coolers and after coolers
2 micron paper suction filter EN 12021 CGA E breathing air
Information for onboard use with electric generator starting load Ampere *42 A **87 AGenerator power @ starting (without pressure) 4 KVA
FEATURES
MCH-6/EM SILENTCode SC000145 for 230 V - 50 HzCode SC000146 for 230 V - 60 HzCode SC000147 for 115 V - 60 Hz
MCH-6/ET SILENTCode SC000148 for 400 V - 50 Hz
Top can be opened to access to the oil dipstick and the suction filter
Automated view
24
Filling connection(see page 27)
Hourmeter
Pressure gauge
Starting
Cooling fan
Maxifilter withactivated carbon and molecular sieve
Oil drain
Autostop
Safety valve
Water separator
Autodrain with timer
Condensate drain valve
Soundproof cabin
25
COMPRESSORS FOR PAINTBALL
Driven by: Robin Subaru petrol engine EX17 model, certificated CARB III and EPA2-EURO2
Chargin rate: 100 L/min-6 m³/hFilling time cylinder 10L 0-200 bar: 20 min Working pressure:200 - 225 - 300 - 330 barFuel: unleaded petrolDimensions: height 35 cm/13.7”, width 78 cm/30.7”, depth 32 cm/12.5”Dry weight: 36,2 Kg/79.8 lbs
MCH-6/SR
MCH-6/EM
Driven by: single-phase electric motor with centrifugal switch Charging rate: 80 L/min - 4,8 m³/hFilling time cylinder 10 L 0-200 bar: 25 minWorking pressure:200 - 225 - 300 - 330 barDimensions: height 35 cm/13.7”, width 78 cm/30.7”, depth 39 cm/15.3”Dry weight: 39,5 Kg/87 lbs
Code SC000120/S for 230 V - 50 HzCode SC000121/S for 230 V - 60 HzCode SC000122/S for 115 V - 60 Hz
NO HP FILTER
Code SC000090/S
NO HP FILTER
STANDARD FILLING
CONNECTIONS
Code 6-05-024 DIN 230 bar
Code 6-05-023ITALIA
Code 6-05-024/300 DIN 300 bar
Code 6-05-025INT
OPTIONAL FILLING
CONNECTIONS
Code SC000460/SPBC DIN 300 bar USA WITHOUT PIN
Code SC000460BC DIN 300 bar USA WITH PIN
Code RE100350DIN/INT ADAPTER
Code SC000475BC ITALIA
Code SC000470BC DIN 230 bar
Code SC000450BC INT
26
Code HC010110
FOOD GRADE FLOATING LP PIPECode HC010160
2nd STAGE REGULATORCode HC010170
DOUBLE OUTLETCode HC010180
Driven by Honda petrol engine certified CARB III, EPA2-EURO2
300 L / min - 18 m3 / h - 10,5 CFM air deliver
Working pressure 8 bar / 120 psi
1100 rpm pumping unit
Power 3,6 Kw / 5,5 HP @ 3600 rpm
Fuel unleaded petrol
Fuel tank capacity 3,6 L / 3.8 quarts
Fuel consuption 0,987 L / h - 1.04 quarts/hour
Dimensions height 55 cm / 21.6”, width 90 cm / 35.4”, depth 45 cm / 17.7”
Dry weight 52 Kg / 114.6 lbs
100,5 LWA noise power 80,5 dB noise pressure
3 stages and cylinders
Lubricating oil capacity 125 cc (0,125 L) / 4.2 FL.OZ.
Lubricant Coltri Oil CE 750
Frame powder coated steel
Filter cartridge with activated carbon and molecular sieve
Safety valve on the volume tank Aluminum interstage coolers and after coolers
Foam suction filter
OPTIONAL ACCESSORIES
FEATURESEOLO 300 SHLOW PRESSURECOMPRESSOR
27
Driven by single-phase electric motor for EOLO 300 EMDriven by three-phase electric motor for EOLO 300 ET
300 L / min - 18 m3 / h - 10,5 CFM air deliver
Working pressure 8 bar / 120 psi
1100 rpm pumping unit
Power 2 Kw for EOLO 300 EM and 3 Kw for EOLO 300 Et
14 A (230 V - 50/60 Hz) for EOLO 300 EM full load Ampere11,5 A (230/400 V - 50 Hz) 6,7 A (230 V - 60 Hz) for EOLO 300 ET full load Ampere
Dimensions height 51 cm / 20”, width 78 cm / 30.7”, depth 45 cm / 17.7”
Dry weight 55 Kg / 121.2 lbs
81,7 dB noise pressure for EOLO 300 EM and 83 dB noise pressure for EOLO 300 ET
Lubricating oil capacity 125 cc (0,125 L) / 4.2 FL.OZ.
Lubricant Coltri Oil CE 750
Frame powder coated steel
Filter cartridge with activated carbon and molecular sieve
Safety valve on the volume tank Aluminum interstage coolers and after coolers
Foam suction filter
FEATURESEOLO 300 EMEOLO 300 ET
LOW PRESSURECOMPRESSORS
OPTIONAL ACCESSORIES
EOLO 300 EMCode HC010130 for 230 V - 50 HzCode HC010131 for 230 V - 60 Hz
EOLO 300 ETCode HC010150 for 400 V - 50 HzCode HC010151 for 230 V - 50 HzCode SC000152 for 230 V - 60 Hz
FOOD GRADE FLOATING LP PIPECode HC010160
2nd STAGE REGULATORCode HC010170
DOUBLE OUTLETCode HC010180
28
CONSUMABLES
SYNTHETIC COLTRI OIL CE 750
SYNTHETIC OIL HAS MULTIPLE BENEFITS
EASIER START-UP
FASTER OIL CIRCULATION AT LOW TEMPERATURE
YEAR-ROUND OPERATION
REDUCED WARM-UP
CLEANER COMPRESSOR
HIGHER FILM STRENGTH
UNI-20W50 ENGINE OIL
Code SC000498 for 5L Code SC000497 for 2LCode SC000496 for 1L Code SC000495 for 1/2L
Code SC000430 for 1L
SUCTION FILTERCARTRIDGECode SC000345
AIR FILTER CARTRIDGE
Code SC000340
Internal view withactivated carbon and molecular sieve
29
ACCESSORIES
OXYGEN & HELIUM ANALYZER Code SC000725
OXYGEN AND HELIUM SENSOR SPECIFICATION
Galvanic cell type Measurements range 0+100% of oxygen and Helium in air or Nitrogen or oxygen Operating humidity from 0 to 95% non condensingOperating temperature range from 5°C (41F) to 40°C (104F)Storage temperatute range from -15°C (5F) to 50°C (122F)
ANALYZER
Code SC000722 CARBON MONOXIDE ANALYZER
Code SC000720 OXYGEN ANALYZER
Code SC000721 OXYGEN ANALYZER
Code SC000723 HELIUM ANALYZER
FLOW RESTRICTOR 1L/minCode SC000724
WRENCH FOR FILTER PLUGCode 6-00-0200
30
AEROTECNICA COLTRI® S.p.A.
via dei Colli Storici 177
25010 San Martino della Battaglia
Brescia - ITALY
Tel: +39.030.99.103.01
+39.030.99.102.97
Fax: +39.030.99.10.283
www.aerotecnicacoltri.it
Technical features and product range, in this catalogue, can be changed without pre-notice.
Code CAT/COMPR/MCH6/GBEDITION 05-2013