Marine

People - Ideas - Solutions

High Accuracy Bunker Control

2 3

Specifi cationsBunker Control

1. Actual flow in m3/h. 2. Total Counter, can not be reset. 3. Density Act. Is actual density measured by the flow meter.4. Density 15. Is calculated density at 15 deg. C. using the

temperature shown in “6”. 5. Density 15 lab. Is the expected density as measured in

reference laboratory. 6. Actual temperature measured by the flow meter. 7. Average temperature calculated during loading or

unloading of oil. 8. Total Tons delivered. Resettable.9. Total m3 delivered. Resettable.10. START/RUN button. 11. Warning light for high flow. 12. Warning light for density error (entrained air).13. Not used. 14. A historical trend showing current values of flow,

temperature, density 15 and delivered oil.15. Control bar.16. Log to Excel.17. Opens parameter window.

The Insatech Marine Bunker Control solution can be used on both delivering and receiving vessels.

No matter if oil is bought or sold, total knowledge of the transferred amount and full bunker documentation is needed.

The Insatech Marine Bunker Control solution is a one (HFO) or two (HFO+MGO) flow meter installation. The bunker control gives full overview of the bunker process.The Coriolis principle mass flow meters ensure correct mass measurements, temperature and density. The Bunker control installation can be supplied according to MID Annex MI-005 as an option (Custody transfer).The MID approval guarantees that measured values are correct and is a strong asset in any claim situation.

The Bunker Control solution has a built in anti-pilferage function. Entrained air will be detected immediately, and alarm will be given. This ensures that surprises due to the cappuccino effect are eliminated. Further the reverse flow totalizer guarantees that only net flow is measured.

All data is summed up in an automatically generated bunker report (optional MID approval).

Features

• Direct measurement in metric tons (vacuum)• Direct actual density measurement• Direct temperature measurement• Online calculation of Density 15• Built in anti-pilferage function• Average temperature calculation• Average Density 15 calculation• Air in oil detection and alarm• Counter per delivery• Total counter, not resettable• Reverse flow totalizer• Full data log of every parameter available in the system• Full Bunker report

Optional features

• Data integration via internet• MID certification• Sulphur measurement• Water in oil measurement• Automatic sampler

Layout example for a 2 product system. Operator display Bunker Control system.

Parameter display for Bunker Control system.

Flow measuring equipment• Mass measurement using the Coriolis principle• +/- 0.1% accuracy of flow rate• Reproducibility of reading: +/- 0.05%• Temperature measurement +/- 0.5°C +/-0.2% of reading• Density accuracy: +/- 0.00005 g/cm3 (non aerated liquids)• Mass flow measurement up to 600 t/h• Special detector decoupling ensuring high independency of

external loads and vibrations• Available in explosion proof versions• Optional heat tracing Viscosity measuring equipment• +/- 1% accuracy of reading• Reproducibility of reading: +/- 0.5%• Density independent (not a tuning fork)• Explosion proof• Output: 2 x analog or 1 analog and 1 serial (RS232 or

RS485) Blend unit actuator• Operating time 90°: 2 – 11 sek.• Open/shut: 90° - 180° rotation angle• Position indication: Cam switches (options: potentiometer or

transmitter 0-(4)-20mA)• Explosion proof • Optional failsafe device, mechanical or electric

Coriolis Meter Viscosity Meter

Insatech A/S • Algade 133 • DK-4760 Vordingborg • Denmark Tel. +45 5537 2095 • www.insatech.com

People - Ideas - Solutions

Marine

Insatech A/S was established in 1989, and has, over the years, had a positive business development; today we are more than 50 employees, and are considered one of the market leaders. We are based in Vordingborg in the south of Zealand, in an old historic building. Since December 2005 we are part of the Addtech Group of companies – Addtech AB, Stockholm.

As a result of our longstanding partnership with some of the world’s leading manufacturers within instrumentation and automation, we are able to provide a global service.

We supply quality products, solutions and services in the fields of measurement, control and calibration to nearly all industrial segments, as well as utilities, and we work as a professional partner for our suppliers and for our customers – we believe in long term relationships.

Our main markets are in the Pharmaceutical, Food, Energy, Marine/Oil & Gas Industry, which means we have a strong knowledge of the special applications, as well as the requirements for documentation in these areas.

About us

• Process instrumentation and calibration equipment

• Automation, control and data aquisition• System design, engineering and validation

(DCS and Safety Systems)• Service/maintenance and calibration

(ISO 17025 accreditation)• Site surveys and evaluation of process

optimization based on better control practices

• Marine- and ship solutions, Cargo Management Systems

• Project Management• Flow rigs / calibration rigs• Special fittings• Product enhancements• Wireless solutions for monitoring

and control• Complete solutions including panels

and commissioning• Seminars and training

Our main business areas:

Conductivity calibrationTemperature calibration

Electrical calibration

2013

-10-

002_

Hig

h A

ccur

acy

Bunk

er C

ontr

ol •

© In

sate

ch A

/S -

Rep

rodu

ctio

n of

tex

t or

exc

erpt

s of

thi

s is

aut

horiz

ed p

rovi

ded

the

sour

ce is

ack

now

ledg

ed.

High Accuracy Bunker Control