Hh 360 Bd Product Leaflet
2
Hutchison Hayes Separation Inc. Hutchison Hayes Separation Inc. www.hutchisonhayes.com 3520 East Belt P.O.Box 2965 Houston, Texas 77015, USA Houston, Texas 77252, USA Phone 713 455 9600 Fax 713 455 7753 HH 360 BD The HH 360 centrifuge is a Biodiesel cleaning system with a low installation cost. It is a small and compact system with well proven components. Application The HH 360 system is specifically designed for a number of different separation duties, such as: purification, degumming, wash water removal, glycerin separation and clarification Working principle: Separation takes place in a solids-retaining, also known as a solid bowl that can be arranged for purification or clarification (optional). In both cases the dirty oil is fed in to the separator by a build-on feed pump through the oil inlet and is separated by centrifugal force into its various phases. The heaviest phase, sludge, is forced to and deposited at the periphery of the bowl. Separated sludge is collected in the space at the periphery of the bowl and must be removed periodically by hand. The clean oil is continuously discharged through a built-on pump. Water leaves the bowl via an open outlet. When operated in purifier mode, a gravity disc must be fitted to obtain the correct interface position (the boundary between the separated oil and the water seal) in the separator bowl. In the optional clarifier mode, a clarifier disc is fitted instead of a gravity disc. A water seal alarm is available as optional equipment to monitor the pressure in the clean oil outlet. The control unit will shut off the oil feed to the separator in case a pressure drop is detected and give an audible and/or visible alarm. Installation The HH 360 separation system is designed for installation as a complete system. The layout schematic shows a typical installation of an HH 360 separator. Dirty oil is supplied by the feed pump from the oil tank to the separator bowl for continuous cleaning. After separation, the cleaned oil is discharged by a built-on pump. Options A complete system includes an optional water seal alarm, starter, valves, piping and other equipment.
-
Upload
helbertortiz -
Category
Documents
-
view
216 -
download
4
Transcript of Hh 360 Bd Product Leaflet
Hutchison Hayes Separation Inc.
Hutchison Hayes Separation Inc. www.hutchisonhayes.com 3520 East Belt P.O.Box 2965 Houston, Texas 77015, USA Houston, Texas 77252, USA Phone 713 455 9600 Fax 713 455 7753
HH 360 BD
The HH 360 centrifuge is a Biodiesel cleaning system with a low installation cost. It is a small and compact system with well proven components. Application The HH 360 system is specifically designed for a number of different separation duties, such as: purification, degumming, wash water removal, glycerin separation and clarification Working principle: Separation takes place in a solids-retaining, also known as a solid bowl that can be arranged for purification or clarification (optional). In both cases the dirty oil is fed in to the separator by a build-on feed pump through the oil inlet and is separated by centrifugal force into its various phases. The heaviest phase, sludge, is forced to and deposited at the periphery of the bowl. Separated sludge is collected in the space at the periphery of the bowl and must be removed periodically by hand. The clean oil is
continuously discharged through a built-on pump. Water leaves the bowl via an open outlet. When operated in purifier mode, a gravity disc must be fitted to obtain the correct interface position (the boundary between the separated oil and the water seal) in the separator bowl. In the optional clarifier mode, a clarifier disc is fitted instead of a gravity disc. A water seal alarm is available as optional equipment to monitor the pressure in the clean oil outlet. The control unit will shut off the oil feed to the separator in case a pressure drop is detected and give an audible and/or visible alarm. Installation The HH 360 separation system is designed for installation as a complete system. The layout schematic shows a typical installation of an HH 360 separator. Dirty oil is supplied by the feed pump from the oil tank to the separator bowl for continuous cleaning. After separation, the cleaned oil is discharged by a built-on pump. Options A complete system includes an optional water seal alarm, starter, valves, piping and other equipment.
Hutchison Hayes Separation Inc.
Hutchison Hayes Separation Inc. www.hutchisonhayes.com 3520 East Belt P.O.Box 2965 Houston, Texas 77015, USA Houston, Texas 77252, USA Phone 713 455 9600 Fax 713 455 7753
TECHNICAL DATA SHEET MODEL HH-360 BD
MAXIMUM RATED CAPACITY 47 GPM SPEED Minimum temperature 30°F Drive motor 1750 RPM Maximum temperature 212°F Bowl Spindle 8425 RPM Recommended throughput: Run up time 2 minutes Run down time 3 minutes Bio Diesel Viscosity 14 cSt/40°C (104°F) 30 GPM Materials Viscosity 32-46 cSt/40°C (104°F)
20 GPM Frame: cast iron (epoxy enamel)
Covers: cast aluminum Suction lift to pump 12 Feet, WC Bowl body, hood, disc stack: stainless steel Delivery head pump 45 Feet, WC Distributor, top disc: nickel
plated bronze
Sludge Holding Space 0.9 Gallon Shipping Data Drive Motor 17 HP Unit is shipped with all necessary bowl tools, Gear Case Oil 1 Gallon mounting isolators, built-on feed pump and motor. Net weight 725 Lbs Operating Water for Sealing Gross weight 945 Lbs Max chloride content 60 PPM Volume 44 Cu. foot
![l>lf·· E ·B; -I,:,C-·-1·1V · cat. no.i bd lj.657 bd lj.6]5 bd 4630 bd 4·627 bd 4628 bd 4886 bd 4546 bd 4·545 bd 4544 bd 4542 bd lj,588 bd lj.593 bd 0102 bd 4636 bd 4632 bd](https://static.fdocuments.net/doc/165x107/5f7c69bb7d840d18665ab1e6/llf-e-b-ic-11v-cat-noi-bd-lj657-bd-lj65-bd-4630-bd-4627-bd-4628-bd.jpg)
![B C&% % 1 % 8 : G ':&% I G J & D %7L% . 3 · [ $3 hh hh$#hh 1 [hhh hh hh dhhphh #hhm#hhbhh hh&lhh < w) d?. {lhh hh$ @b#-p 3 c 3:;hhh $# #" )j p d] #hhm#hhbhh hh&x %hh | x4 3 hh?hh](https://static.fdocuments.net/doc/165x107/5ea61d5cbec94348cc54f9a5/b-c-1-8-g-i-g-j-d-7l-3-3-hh-hhhh-1-hhh-hh-hh.jpg)
