HENDERSON - ASSA ABLOY Opening Solutions NZ
Transcript of HENDERSON - ASSA ABLOY Opening Solutions NZ
HE
ND
ER
SO
Ninterior folding systems
ISSU
E 1-
0313
D40
For top hung interior pivot folding partitions. Max 75kg each leaf.
SoltAIre PIvotfold
APPlICAtIon
• Manufactured from high grade 316 stainless steel with anodised aluminium track• Suitable for residential and commercial pivot folding partition• The folding unit is not hinged to the jamb, but is pivoted in the track and off the floor• To cover any width of opening, any number of folding units can be used• Folding units of up to eight leaves can be pivoted from a post• Floating units can consist of four, six or eight leaves
door SPeCIfICAtIon
track System Soltaire 45 Soltaire 75For Individual Door Leaves:Max Panel Weight 45kg 75kgMax Panel Width 900mm 900mmPanel Thickness 35-56mm 35-56mmMax Panel Height 3000mm 3300mm
H21/180/SS - Hanger
H21/250/SS - HangerH100x75LPSS - Hinge
No. HSF190 - Flush Bolt
H21SS/94 - Guide
H21SS/PSC - Guide
H1/250 - Bracket
HArdWAre SPeCIfICAtIon
track System Soltaire 45 Soltaire 75
track H180A H250AAnodised aluminium (2000, 3000, 4000 & 6000mm lengths)Soffit fix spacing 900mm centres (maximum)
Brush StripsBS10, BS15, Available in black in 4 brush heights, by the metreBS20, BS25 (mm)
Brackets H1/SS Face fixed stainless steelStarting 20mm from end of track fix at 900mm maximum centres.
Hangers H21/180/SS Timber doors 45kg 4 wheelH21/250/SS Timber doors 75kg 4 wheel
Pivots H21/SS/P Top and bottom pivot channel fixH21/SS/PNC Top and bottom pivots no channel
track Stop HH5/SS Anodised aluminium with rubber bufferHinges HSF3S Non-mortice hinge handle set
(includes 2 hinges and 1 hinge handle)HSF5S Non-mortice hinge set (includes 3 hinges)H100X75LPSS Stainless steel butt hingeH100X75DHSS Stainless steel D Handle butt hinge
guides H21SS/94 Angle plate fixing stainless steel
Channels H94X Aluminium (2000, 3000, 4000 & 6000mm lengths) H94 Brass (4000 & 6000mm lengths)H89SS Stainless steel (2000 & 3000mm lengths)H94P Polypropylene (2000, 3000, 4000 & 6000mm lengths)H94PSC Aluminium supporting channel and polypropylene
(2000, 3000, 4000 & 6000mm lengths)
flushbolts H190S 190mm flushbolt non-lockingH190LS 190mm flushbolt lockingH450S 450mm flushbolt non-lockingH450LS 450mm flushbolt lockingH600S 600mm flushbolt non-lockingH600LS 600mm flushbolt locking
flush Pulls
IMAGE COMING
SOON
IMAGE COMING
SOON
IMAGE COMING
SOON
H94X - Channel
H21/SS/PNC
50
50
3
20
H250 - Track
45
60
�6
6,0
20
Ø1024
6
HH5/SS - Track Stop
47
45
2
19
H180 - Track
HSF190S
HE
ND
ER
SO
N
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
ISSU
E 1-
0313
D40B
No. H21/SS/P OR H21/SS/PNC Top Pivot
No. 180 Track
No. BS150 or BS20B Brush Seal
Hangers, 2 wheels or 4 wheels for stability. Fitted on leaf adjacent to access door when access door forms part of the unit.
Track cut to fit tight on jamb
1/250 Bracket
M6 screw with washer and captive nut
Hanger
No. 1/250 Bracket
No. 45/75P Bottom Pivot
No. 94PSC Channel
Fit hinges clear of hanger and guide plate
No. 400 Flush Pulls
Flush Bolt
No. 45/75P Top Pivot
Radius to clear jamb when pivoting
Cover fillet
Extra bracket to take weight of folded door
vIeW SHoWIng AlternAtIve no. 250 trACK And 1/250 BrACKet
PIvot detAIltoP of door WItH HAnger removed
H21/SS/PNC BottoM Pivot ASSEMBly
250 TrackBolt and Pull
Bolt and Pull
PlAn 1
PlAn 2
No. 45/75P Top Pivot
16 Thick Timber Pad
Angle Plate vertical leg narrower to allow for rebating
Bore hole for Hanger 27 dia. x 36 to allow bolt to withdraw
Fit Hinges 6 offset to centre of Pin.
100X75LPSS Butt Hinge
Section Scale 1:2
6 min. clearance
Angle Plate vertical leg narrower to allow for rebating
No. 4G/904 GuideNOT TO SCALE
94PSC Polypropylene channel with aluminium support channel recessed into floor
H21/SS/P BottoM Pivot ASSEMBlyH21/SS/PNC
Bottom Pivot Assembly
H21/SS/P Bottom Pivot
Assembly
Pivot socket
H21/180/SS
H21/250/SS
VIEW SHOWING ALTERNATIVE NO. 250 TRACK AND 1/SS BRACKET