Hemstedt Catalogue

Produc t catalogue 2011

Innovative products for an optimum temperature

H e a t I n g t e c H n o l o g y f o r t H e H o m e

all you can heat

Hemstedt ® Hem-system ® tHIn-bed HeatIng mats With sleeveless cold/warm splice

Produc t InnovatIon for even sImPler InstallatIon

the Hemstedt® self-adhesive thin-bed heating mat has been fitted with the Hem-system® since 2005: the cold/warm splice is now sleeveless so that the typical problems associated with bulky shrinkable sleeves are eliminated. this simplifies the work for the floor fitter and the electrician. all subsequent work can be carried out on a flat surface. the Hem-system® has established itself as a successful solution.

the sleeveless splice is absolutely waterproof, and therefore ideal for installations requiring moisture proofing. another benefit: this insulating covering is completely resistant to chemicals and temperatures up to 200 °c. this is provided right up to the thermostat.

leeveless self-adhesive 100 % waterproof

direct from the manufacturer Insulating covering completely

chemical and temperature resistant

neW before

about us

Hemstedt® has been one of the leading manufacturers of heating cables and products for cold store houses for over 40 years. our high-quality products are produced in accordance with the latest technical standards.

as an expert in heating cables and cold store technology, Hemstedt® not only complies with the very individual requirements of its customers, but also stands out by frequent-ly presenting trend-setting innovations.a lot of these developments are protected by international patents. many of these developments are protected by international patents. our customers all over the world not only appreciate the wide range of Hemstedt products, but also the short delivery times, the professional handling and our customized pricing. our company is provided with an operating area of more than 16,000 m2 and has worked for its leading position against keen competition within the sector. We aim to always

„satisfied customers – the aim we share.“

see for yourself and benefit from the many possibilities our products offer –also for your product range!

Hemstedt® quality: excellent!

Iecex declaration of conformity Iecex Kem 10.0010 u

Iec 60079-0: 2004Iec 60079-30-1: 2007

Iec 61241-0: 2004Iec 61241-1: 2004

ec type approval certificate Kema 09ate X0021 u

en 60079-0: 2006en 60079-30-1: 2007

en 61241-0: 2006en 61241-1: 2004

Hemstedt gmbH is one of the 100 most innovativemedium-sized companies in germany. It wasoutstanding in the renowned “top 100 Innovators”comparison of companies on account of its sys-tematic, well-conceived and accordingly successfulinnovation management, and in 2008 was awardedthe sought after “top 100” quality seal. In the area of “innovation-supporting top management”, the company even succeeded in jumping up the rankings to 7th place. In this category, Hemstedt® is thus now one of the 7 most innovative medium-sized companies in germany.

Hemstedt ® – every tHIng from a sIngle source our range of services

Hemstedt® is the successful specialist and reliable oem partner for innovative electrical underfloor heating systems. cold storage technology and special solutions, together with consulting, project planning and development, complete the portfolio.

take advantage of this extensive range from a single source:

Hemstedt® Home technology

electric underfloor heating systems electric thin-bed heating mats for dry installation / laminate flooring electric thin-bed heating mats for laying in wet rooms electric outdoor area heating systems frost protection heating elements/ pipe heating element – also with earthed plug roof gutter heating systems – also with earthed plug self-regulating heating bands manufactured heating cables special heating elements thin-bed heating mats, warm water

Hemstedt® farming, gardening and sport

Heating cable for animal husbandry and plant growing Heating cables for heating sports grounds

Hemstedt® cold storage technology

emergency alarm systems electrical under-freezing protection heating mats Heated and unheated pressure compensating valves deep-freeze cells and cold storage cells as well as deep-freeze

buildings and cold storage buildings for cells and cold storage buildings controllers/temperature regulators

Hemstedt® cable factory

Heating cables in material groups Pe, Pvc, silicon, feP, Pfa and Ptfe

contents

Product Page

underfloor heating –thin-bed heating mats and heating cables 6

underfloor heating – concrete heating mats / heating cables and asphalt heating mats / heating cables 17

outdoor heating mats 22

frost protection heating elements 32

eaves gutter heating 38

farming and gardening 44

Heating cables for outdoor sports areas 46

accessories: distance bars 48

natural stone heating elements on request

Heating cables on drum /self-regulating heating tapes – separate catalogue

on request

cold storage technology – separate catalogue on request

ate X – explosion proof heating cables and connection technology – separate catalogue

on request

figure

6

Hem-system ® tHIn-bed dIrec t HeatIng mats

und

erflo

or h

eatin

g sy

stem

s

thin-bed heating mats – dry installation system for laminate and ready-to-lay wooden parquet

thin-bed heating mats in adhesive for tiles and natural stone

cold connection cable sleeveless splice Heating cable

7

modern underfloor heating systems from Hemstedt® generateheat source over a large-area to ensure a comfortable room temperature.

thin-bed heating for tiles

thin-bed heating mats and heating cables – specially designed for installation in bathrooms, showers, children’s rooms, living rooms and bedrooms.the thin-bed heating mats and heating cables are layed directly in the levelling compound. by cutting the heating mats they can be adapted easily to different building conditions. the maximum output of an underfloor direct heating system must not exceed 150 W/m².

dry installation system for laminate and ready to lay parquet floor

the brand new Hem dry installation system sets new standards in warmth, installation height and mounting. With its unique heating mat concept using aluminium-coated textile fibre glass, Hemstedt® ensures even heat distribution and super fast heating within a few minutes. the heating cables are extremely thin at only 2.8 mm, fit easily in the sound insulation and fully secured against slipping. the specialist’s view: Ideal for renovation, new builds and also subsequent removal.the Hem dry installation must only be layed in dry rooms. by cutting the heating mats they can be adapted easily to different building conditions. all components must be temperature resistant up to 80 °c. a sound/heat insulation with fire class b2 is required.

the sleeveless splice is absolutely waterproof, and therefore ideal for installations requiring moisture proofing.

und

erflo

or h

eatin

g sy

stem

s

modern underfloor HeatIng systems WItH loW InstallatIon HeIgHt Ideal for different building conditions

Warmth made to measure direct from the manufacturer self-adhesive 100 % waterproof Insulating covering completely

chemical and temperature resistant

for use in tile adhesive or levelling compound Pagethin-bed heating mat sets 8thin-bed heating mats / thin-bed heating cables 11dry installation under laminate and engineered parquet flooringalu dry installation system 13Intelligent temperature controllersHemstedt® regulators 15

low installation height!

max. 5 mm + floor covering

thin

-bed

hea

ting

mat

s dHsu tHIn-bed HeatIng mat se t sleeveless with timer thermostat, flush installation, for installation

Hem system® heating mats with single-end connection cable for mounting in tile adhesive / or levelling compound. Ideal for renovations, new buildings as well as for baths, showers, living rooms, offices etc.

the thin-bed heating mat set contains the following products: 1 Hem direct heating mat with single-end connection cable 150 W/m² and 4.00 m connection cable 1 temperature regulator with self-teaching timer thermostat and sensor, flush 1 end seal sensor for sensor tube 1 sensor tube for room thermostat 1 switch socket 1 installation instructions

nominal voltage ............................................................................................................230 voltoutput ...............................................................................................................................150 W/m²cold connection cable .................................................................................................1 x 4.00 mminimum installation temperature ........................................................................5 °csmallest bending radius .............................................................................................6 x daresistance tolerance .................................................................................................... -5 % / +10 %approvals .........................................................................................................................vdecold / warm splice .........................................................................................................sleeveless, without shrinkable sleeveInsulation ..........................................................................................................................Ptfesupplied width ...............................................................................................................0.46 mcalculated width ............................................................................................................0.50 m

technical data

8 www.hemstedt.comas of 03 /11. subject to alterations. all prices not including vat.

accessories

a residual current device (fI < 30 ma) must be provided as a protection measure.extended cold connection cables cannot be returned.

150 W/m² 230 vdHsu thin-bed heating mats with single-end connection cable

Heating output W surface area m² calculated width m length m order no. Price/pce €

150 1.00 0.50 2.00 30751-150 u-set 266.60 225 1.50 0.50 3.00 30751-225 u-set 279.30 300 2.00 0.50 4.00 30751-300 u-set 287.30 375 2.50 0.50 5.00 30751-375 u-set 323.40 450 3.00 0.50 6.00 30751-450 u-set 338.80 525 3.50 0.50 7.00 30751-525 u-set 381.60 600 4.00 0.50 8.00 30751-600 u-set 406.00 675 4.50 0.50 9.00 30751-675 u-set 419.70 750 5.00 0.50 10.00 30751-750 u-set 472.20 900 6.00 0.50 12.00 30751-900 u-set 530.10 1050 7.00 0.50 14.00 30751-1050 u-set 597.50 1200 8.00 0.50 16.00 30751-1200 u-set 663.90 1350 9.00 0.50 18.00 30751-1350 u-set 711.60 1500 10.00 0.50 20.00 30751-1500 u-set 754.40

article designation order no. Price/pce €

cold connection cable for extension 3 x 1.00 mm², 1.00 m, black 81302-1.00 bl/sW 3.60

mounting sleeve (1, factory fitted), for extension 26121 6.00

mounting / repair set with cold connection cable 1 x 5.00 m,incl. 1 sleeve, for extension 26155 19.00

cu end seal sensor (od 15.20 mm / Id 12.50 mm) 20079 6.60

Plastic switch socket for room thermostat 20702 0.70

sensor tube for room thermostat, length: 2.50 m 20703 4.90

spare temperature sensor timer thermostat 93099 sensor 13.09

dHsu thin-bed heating mat

sleevelesssplice

by cutting the heating mats they can beadapted easily todifferent buildingconditions.

flexible installation

simply cut and adjust.

cold connection cable 1.00 m² - 4.00 m² 0.50 mm² I 4.50 m² - 9.00 m² 0.75 mm² I 10.00 m² 1.00 mm²Heat insulation is required in flooring in all cases.

supplied widthcalculated width

calculated width

thin

-bed

hea

ting

mat

sdHsPa tHIn-bed HeatIng mat se t sleeveless with point scale regulator, flush


the thin-bed heating mat set contains the following products: 1 Hem direct heating mat with single-end connection cable 150 W/m² and 4.00 m cold connection cable 1 analog regulator, flush and sensor 1 end seal sensor for sensor tube 1 sensor tube for room thermostat 1 switch socket 1 installation instructions

nominal voltage ............................................................................................................230 voltoutput ...............................................................................................................................150 W/m²cold connection cable .................................................................................................1 x 4.00 mminimum installation temperature ........................................................................5 °csmallest bending radius .............................................................................................6 x daresistance tolerance .................................................................................................... -5 % / +10 %approvals .........................................................................................................................vdecold / warm splice .........................................................................................................sleeveless, without shrinkable sleeveInsulation ..........................................................................................................................Ptfesupplied width ...............................................................................................................0.46 mcalculated width ............................................................................................................0.50 m

technical data

9www.hemstedt.comas of 03 /11. subject to alterations. all prices not including vat.

accessories


cold connection cable 1.00 m² - 4.00 m² 0.50 mm² I 4.50 m² - 6.00 m² 0.75 mm² Heat insulation is required in flooring in all cases.

150 W/m² 230 v


cold connection cable for extension 3 x 1.00 mm², 1.00 m, black 81302-1.00 bl/sW 3.60


mounting / repair set with cold connection cable 1 x 5.00 m,incl. 1 sleeve, for extensiong 26155 19.00




spare temperature sensor timer thermostat 93099-fühler 13.09

dHsPa thin-bed heating mats with single-end connection cable


150 1.00 0.50 2.00 30751-150 Pa-set 195.50 225 1.50 0.50 3.00 30751-225 Pa-set 202.50 300 2.00 0.50 4.00 30751-300 Pa-set 248.00 375 2.50 0.50 5.00 30751-375 Pa-set 279.50 450 3.00 0.50 6.00 30751-450 Pa-set 301.10 525 3.50 0.50 7.00 30751-525 Pa-set 338.10 600 4.00 0.50 8.00 30751-600 Pa-set 366.30 750 5.00 0.50 10.00 30751-750 Pa-set 429.50 900 6.00 0.50 12.00 30751-900 Pa-set 487.10

dHsPa thin-bed heating mat

sleevelesssplice

by cutting the heating mats they can beadapted easily todifferent buildingconditions.




calculated width

dHsP tHIn-bed HeatIng mat se t sleeveless with point scale regulator, non-flush, for installation in tile adhesive


the thin-bed heating mat set contains the following products: 1 Hem direct heating mat with single-end connection cable 150 W/m² and 4.00 m connection cable 1 temperature regulator with self-teaching timer thermostat and sensor, flush 1 end seal sensor for sensor tube 1 sensor tube for room thermostat 1 switch socket 1 installation instructions

nominal voltage ............................................................................................................230 voltoutput ...............................................................................................................................150 W/m²cold connection cable .................................................................................................1 x 4.00 mminimum installation temperature ........................................................................5 °csmallest bending radius .............................................................................................6 x daresistance tolerance .................................................................................................... -5 % / +10 %approvals .........................................................................................................................vde cold / warm splice ........................................................................................................sleeveless, without shrinkable sleeveInsulation ..........................................................................................................................Ptfesupplied width ...............................................................................................................0.46 m calculated width ............................................................................................................0.50 m

technical data

10

thin

-bed

hea

ting

mat

s

dHsP thin-bed heating mat

by cutting the heating mats they can be adapted easily to different building conditions.




calculated width

accessories


cold connection cable 1.00 m² - 4.00 m² 0.50 mm² I 4.50 m² - 6.00 m² 0.75 mm² IHeat insulation is required in flooring in all cases.

150 W/m² 230 vdHsP thin-bed heating mats with single-end connection cable


150 1.00 0.50 2.00 30751-150 P-set 180.90 225 1.50 0.50 3.00 30751-225 P-set 208.40 300 2.00 0.50 4.00 30751-300 P-set 234.10 375 2.50 0.50 5.00 30751-375 P-set 265.00 450 3.00 0.50 6.00 30751-450 P-set 286.90 525 3.50 0.50 7.00 30751-525 P-set 324.10 600 4.00 0.50 8.00 30751-600 P-set 352.00 750 5.00 0.50 10.00 30751-750 P-set 415.20 900 6.00 0.50 12.00 30751-900 P-set 473.80


cold connection cable for extension 3 x 1.00 mm², 1.00 m, black 81302-1,00 bl/sW 3.60


mounting / repair set with cold connection cable 1 x 5.00 m, incl. 1 sleeve, for extension 26155 19.00




www.hemstedt.comas of 03 /11. subject to alterations. all prices not including vat.

sleeveless splice





thin

-bed

hea

ting

mat

s

nominal voltage ............................................................................................................230 voltoutput ...............................................................................................................................150 W/m²cold connection cable .................................................................................................1 x 4.00 mminimum installation temperature ........................................................................5 °csmallest bending radius .............................................................................................6 x daresistance tolerance .................................................................................................... -5 % / +10 %approval ...........................................................................................................................vde (1-10 m²) cold / warm splice ........................................................................................................sleeveless, without shrinkable sleeveInsulation ..........................................................................................................................Ptfesupplied width ...............................................................................................................0.46 mcalculated width ............................................................................................................0.50 m

technical data

* with shrinkable sleeve. cold connection cable 1.00 m² - 4.00 m² 0.50 mm² I 4.50 m² - 9.00 m² 0.75 mm² I 10.00 m² 1.00 mm² Heat insulation is required in flooring in all cases.

dH thin-bed heating mat

150 W/m² 230 v

dH tHIn-bed HeatIng mats, sleeveless dr tHIn-bed HeatIng cables, sleeveless Heating mats, self-adhesive

Hem system® Heating mats and thin-bed heating cables with single-end connection cable for installation in tile adhesive / or levelling compound. Ideal for renovations, new buildings as well as for baths, showers, living rooms, offices etc.

dH thin-bed heating mats with single-end connection cable dr thin-bed heating cables

Heat output W

surface area m²

calculated width m

matlength m

order no. Price/pce €

element length m

order no. Price/pce. €

150 1.00 0.50 2.00 30751-150 115.80 12.07 37702-12,07 85.90 225 1.50 0.50 3.00 30751-225 144.70 17.66 37702-17,66 102.70 300 2.00 0.50 4.00 30751-300 162.10 23.77 37702-23,77 114.30 375 2.50 0.50 5.00 30751-375 196.10 29.87 37702-29,87 136.50 450 3.00 0.50 6.00 30751-450 227.80 35.97 37702-35,97 159.80 525 3.50 0.50 7.00 30751-525 258.50 41.56 37702-41,56 179.00 600 4.00 0.50 8.00 30751-600 284.50 47.67 37702-47,67 202.00 675 4.50 0.50 9.00 30751-675 319.70 53.77 37702-53,77 228.40 750 5.00 0.50 10.00 30751-750 346.80 59.87 37702-59,87 243.00 900 6.00 0.50 12.00 30751-900 403.50 71.57 37702-71,57 280.401050 7.00 0.50 14.00 30751-1050 470.50 83.77 37702-83,77 330.601200 8.00 0.50 16.00 30751-1200 539.20 95.47 37702-95,47 376.801350 9.00 0.50 18.00 30751-1350 584.10 107.67 37702-107,67 414.701500 10.00 0.50 20.00 30751-1500 543.60 119.37 37702-119,37 460.401800 12.00 0.50 24.00 30751-1800 645.34 143.27 37707-143,27 537.26 2250 15.00 0.50 30.00 30751-2250 781.72 179.37 37707-179,37 661.88

2379* 19.50 0.50 39.00 30688-2379 895.72 193.11 37708-193,11 705.853038* 24.50 0.50 49.00 30688-3038 997.13 242.49 37708-242,49 827.96

accessories

a residual current device (fI < 30 ma) must be provided as a protection measure. extended cold connection cables cannot be returned.








analog point scale regulator with sensor, non-flush 93098 81.30

analog point scale regulator with sensor, flush 93093 96.20

Intelligent temperature monitoring timer thermostat with self-teach function and sensor, flush 93099 118.10

distance bars 20060 1.04

dr thin-bedheating cables


calculated width

distance bars for thin-bed heating cables

1260 W/m² 230 v

sleeveless splice


thin

-bed

hea

ting

mat

s

nominal voltage ............................................................................................................230 voltoutput ...............................................................................................................................150 W/m²cold connection cable .................................................................................................1 x 6.00 1 2.50 mminimum installation temperature ........................................................................5 °csmallest bending radius .............................................................................................6 x daresistance tolerance .................................................................................................... -5 % / +10 %standard ...........................................................................................................................60335-2-96cold / warm splice ........................................................................................................sleeveless, without shrinkable sleeveInsulation ..........................................................................................................................Ptfesupplied width ...............................................................................................................0.46 m calculated width ............................................................................................................0.50 m

technical data

dH-Z thin-bed heating mat

dr-Z thin-bed heating cables

Heat insulation is required in flooring in all cases.

150 W/m² 230 vdH-Z heating mats with double-end connection cable dr-Z thin-bed heating cables

Heat output W

surface area m²

calculated width m

matlength m


element length m


150 1.00 0.50 2.00 30800-150 73.80 12.07 37709-12,07 55.00 225 1.50 0.50 3.00 30800-225 112.20 17.66 37709-17,66 80.80 300 2.00 0.50 4.00 30800-300 144.50 23.77 37709-23,77 104.00 375 2.50 0.50 5.00 30800-375 171.60 29.87 37709-29,87 123.00 450 3.00 0.50 6.00 30800-450 196.30 35.97 37709-35,97 140.10 525 3.50 0.50 7.00 30800-525 227.30 41.56 37709-41,56 161.90 600 4.00 0.50 8.00 30800-600 244.00 47.67 37709-47,67 173.20 675 4.50 0.50 9.00 30800-675 282.90 53.77 37709-53,77 200.00 750 5.00 0.50 10.00 30800-750 311.90 59.87 37709-59,87 220.20 900 6.00 0.50 12.00 30800-900 366.40 71.57 37709-71,57 256.501050 7.00 0.50 14.00 30800-1050 414.20 83.77 37709-83,77 287.501200 8.00 0.50 16.00 30800-1200 458.96 95.47 37709-95,47 295.091350 9.00 0.50 18.00 30800-1350 502.83 107.67 37709-107,67 302.941500 10.00 0.50 20.00 30800-1500 519.20 119.37 37709-119,37 319.91

accessories


dH-Z tHIn-bed HeatIng mats dr-Z tHIn-bed HeatIng cables sleeveless, heating mats, self-adhesive

Hem system® heating mats and thin-bed heating cables with double-end connection cable for installation in tile adhesive / or levelling compound. Ideal for renovations, new buildings as well as for baths showers, living rooms, offices etc.

further information in our installation instructions.

12


cold connection cable for extension 1.00 mm², 2 x 1.00 m, black 81101-1,00 sW 3.10


mounting / repair set with cold connection cable 2 x 5.00 m, incl. 2 sleeves, for extension 26158 12.00




analog point scale regulator with sensor, non-flush 93098 81.30

analog point scale regulator with sensor, flush 93093 96.20

Intelligent temperature monitoring timer thermostat with self-teach function and sensor, flush 93099 118.10

distance bars 20063 1.04

sleeveless splice

neW!super-thin, without

shrink technology!




distance bars for thin-bed heating cables

sleeveless splice


calculated width


calculated width



thin

-bed

hea

ting

mat

s

alu thin-bed heating mat

93088

93089

100 W/m² 230 v

13

alu dry InstallatIon sleeveless, specially developed for laying under laminate and engineered parquet flooring.

Heating mat with single-end connection cable. the aluminium-coated textile glass fabric, ensures even heat distribution underneath the flooring. the small installation height of only approx. 5 mm + floor makes this product ideal for renovations and for new buildings. must only be installed in dry rooms. the regulation system uses thermostats that are specially adapted to this product. the Hem dry installation system is manufactured in accordance with vde 60335-2-96. Installation(brief description): a vapour barrier must be installed and fitted if necessary. the room must be fitted with a tem-perature resistant sound and heat insulation (80 °c, b2). the heated area must be fitted with our Hem dry installation system. fit floor covering.

example for price calculation: the room must be completely fitted with sound and heat insulation (order no.: 20106) calculate the surface area to be heated = size of heating mat (order no.: 30601...) remaining surface area (unheated area) = compensation textile (order no.: 20107) selection and determination of temperature regulator (order no.: 93088 or 93089)

nominal voltage ............................................................................................................230 voltoutput ...............................................................................................................................100 W/m²cold connection cable .................................................................................................1 x 4.00 mminimum installation temperature ........................................................................5 °csmallest bending radius .............................................................................................6 x daresistance tolerance .................................................................................................... -5 % / +10 %standard ...........................................................................................................................60335-2-96cold / warm splice ........................................................................................................sleeveless, without shrinkable sleeveHeating cable diameter...............................................................................................approx. 2.40 mmInsulation ..........................................................................................................................Ptfesupplied width ...............................................................................................................0.45 m calculated width ............................................................................................................0.50 m

technical data

accessories


dry installation system


100 1.00 0.50 2.00 30601-100 130.20 200 2.00 0.50 4.00 30601-200 183.00 300 3.00 0.50 6.00 30601-300 257.60 400 4.00 0.50 8.00 30601-400 316.00 500 5.00 0.50 10.00 30601-500 385.30 600 6.00 0.50 12.00 30601-600 443.90 700 7.00 0.50 14.00 30601-700 552.80 800 8.00 0.50 16.00 30601-800 589.40

sound / heat insulation

article designation Width m length m surface area m² order no. Price/pce €

fire class b2, thickness 5 mm 1.00 10.00 10.00 20106 56.50compensation textile 0.50 10.00 5.00 20107 10.70


cold connection cable for extension 3 x 1.00 mm², 1 x 1.00 m 81302-1,00 bl/sW 3.60






analog point scale regulator with sensor, up to 35 °c, flush 93088 93.50

digital floor regulator, digital with sensor, up to 35 °c, flush 93089 114.50

Hemstedt®

Innovation 2011

extra thin and shortest warm up time




sleeveless splice


calculated width

thin

-bed

hea

ting

mat

s

14

alu-Z dry InstallatIon sleeveless, specially developed for laying under laminate and engineered parquet flooring.

Heating mat with double-end connection cable. the aluminium-coated textile glass fabric ensures even heat distribution underneath the flooring. the small installation height of only ap-prox. 5 mm + floor makes this product ideal for renovations and for new buildings. must only be installed in dry rooms. the regulation system uses thermostats that are specially adapted to this product. the Hem dry installation system is manufactured in accordance with vde 60335-2-96. Installation (brief description): a vapour barrier must be installed and fitted if necessary. the room must be fitted with a tem-perature resistant sound and heat insulation (80 °c, b2). the heated area must be fitted with our Hem dry installation system. fit floor covering.

example for price calculation: the room must be completely fitted with sound and heat insulation (order no.: 20106) calculate the surface area to be heated = size of heating mat (order no.: 30600...) remaining surface area (unheated area) = compensation textile (order no.: 20107) selection and determination of temperature regulator (order no.: 93088 or 93089)

nominal voltage ............................................................................................................230 voltoutput ...............................................................................................................................100 W/m²cold connection cable .................................................................................................1 x 2.50 m / 1 x 6.00 mminimum installation temperature ........................................................................5 °csmallest bending radius .............................................................................................6 x daresistance tolerance .................................................................................................... -5 % / +10 %standard ...........................................................................................................................60335-2-96cold / warm splice ........................................................................................................sleeveless, without shrinkable sleeveHeating cable diameter...............................................................................................approx. 2.40 mmInsulation ..........................................................................................................................Ptfesupplied width ...............................................................................................................0.45 mcalculated width ............................................................................................................0.50 m

technical data

accessories


dry installation system


100 1.00 0.50 2.00 30600-100 83.50200 2.00 0.50 4.00 30600-200 162.10300 3.00 0.50 6.00 30600-300 219.50400 4.00 0.50 8.00 30600-400 271.50500 5.00 0.50 10.00 30600-500 343.00600 6.00 0.50 12.00 30600-600 399.80700 7.00 0.50 14.00 30600-700 450.20800 8.00 0.50 16.00 30600-800 509.20

sound / heat insulation

article designation Width m length m surface area m² order no. Price/pce €

fire class b2, thickness 5 mm 1.00 10.00 10.00 20106 56.50compensation textile 0.50 10.00 5.00 20107 10.70


cold connection cable for extension 1.00 mm², 2 x 1.00 m 81101-1,00 sW 3.10






analog point scale regulator with sensor, up to 35 °c, flush 93088 93.50

digital floor regulator, digital with sensor, up to 35 °c, flush 93089 114.50


Hemstedt®

Innovation 2011

extra-thin and superfast




sleeveless splice

alu-Z thin-bed heating mat

93088

93089

100 W/m² 230 v


tem

pera

ture

regu

lato

r

15

u-uP tImer tHermostat for underfloor heating systems

Pa-uP temPerature regulator WItH PoInt scale for underfloor heating systems

P-aP temPerature regulator WItH PoInt scale for underfloor heating systems

nominal voltage 230 v/50 Hz switching capacity 16 (2) asetting range +10 °c to + 40 °c with mechanical range limitation via setting buttonswitching difference approx. 1.5 Kdisplay Heating mode

nominal voltage 230 v/50 Hz +-10 % / -15 %switching capacity 16 (2) asetting range +10 °c to +40 °c with mechanical range limitation via setting buttonled indication Heating (red) and temperature reduction (green)

technical data

technical data

technical data

fits into dIn wall sockets, compatible with busch-Jaeger, Jung, etc.

fits into dIn wall sockets, compatible with busch-Jaeger, Jung, etc.

a residual current device (fI < 30 ma) must be provided as a protection measure.

Installation in flush mounted socket via intermediate frame 50 x 50 (to dIn 49075) in virtually all wall sockets.

timer thermostat


Hemstedt Hem u intelligent temperature monitoring: thermostat with self-teach function, programmable, time switch zones, with sensor (digital)

93099 118.10

thermostat


Pa-uP temperature regulator with point scale and sensor (analog) 93093 96.20

thermostat


P-aP temperature regulator with point scale and sensor (analog) 93098 81.30

temperature reduction optional within the control range (via external switch/pilot timer)temperature sensor ntc 4 m to dIn 44574. Heating is switched off in the event of sensor failure and short-circuitdegree of protection IP 30 – degree of protection II after appropriate installationHousing colour similar to ral 9010 pure white

temperature reduction 5K via external switch/pilot timertemperature sensor ntc 4 m to dIn 44574. Heating is switched off in the event of sensor failure and short-circuitdegree of protection IP 30 – degree of protection II after appropriate installationHousing colour similar to ral 9010 pure white


the regulator continuously monitors the floor temperature and regulates the temperature as required. the floor temperature can be set to the required value by adjusting the knob. a red led indicates heating mode. the user can set the floor temperature individually and as required and irrespective of the room temperature.

nominal voltage230 v/50 Hz +-6 %switch output10 a at 230 v ac

settable from +5 °c to +40 °ctemperature sensorntc, 4 m

degree of protection of housing IP20

Housing colour ral 9010/whiteHousing dimensions 70.5 x 70.5 x 21 mm


16

notes

16

not

es


17

Hem system ® concre te HeatIng mats and concre te HeatIng cables

conc

rete

hea

ting

mat

s and

con

cret

e he

atin

g ca

bles

conc

rete

hea

ting

mat

s

nominal voltage ............................................................................................................230 voltoutput ...............................................................................................................................100 / 120 / 140 / 160 / 180 / 240 W/m²cold connection cable .................................................................................................1 x 4.00 (1.00 mm²)minimum installation temperature ........................................................................5 °cmax. temperature outer sheath ...............................................................................65 °csmallest bending radius .............................................................................................5 x daresistance tolerance .................................................................................................... -5 % / +10 %cold / warm splice ........................................................................................................sleeveless, without shrinkable sleevediameter ...........................................................................................................................approx. 7.50 mmInsulation ..........................................................................................................................XlPe / Ptfe*supplied width ...............................................................................................................0.80 m calculated width ............................................................................................................0.90 m

technical data

100 W/m² 230 v

120 W/m² 230 v

140 W/m² 230 v

160 W/m² 230 v

* Insulation Ptfe

bH-Im concre te HeatIng mats sleeveless, for installation in / under heating screed

Hem system® Heating mats with single-end connection cable and sleeveless splice. for underfloor storage / direct heating install only in dry, humid and wet rooms as well as in flush installations and in screed.

18

bH-Im concrete heating mats

Heating output W surface area m² calculated width m length m order no. Price/pce € 220 2.20 0.90 2.44 31801-220* 67.90 300 3.00 0.90 3.33 31801-300* 81.20 500 5.00 0.90 5.55 31801-500 108.80 700 6.66 0.90 7.40 31801-700 134.701000 9.52 0.90 10.58 31801-1000 178.80



300 2.49 0.90 2.77 31802-300* 70.30 400 3.33 0.90 3.70 31802-400 87.20 700 5.47 0.90 6.08 31802-700 118.901250 9.77 0.90 10.85 31802-1250 177.902100 16.38 0.90 18.20 31802-2100 280.90



300 2.14 0.90 2.38 31804-300* 69.90 400 2.85 0.90 3.17 31804-400 85.10 700 4.70 0.90 5.22 31804-700 116.601500 10.08 0.90 11.20 31804-1500 189.502300 15.48 0.90 17.20 31804-2300 286.40



300 1.94 0.90 2.15 31806-300* 68.90 500 3.12 0.90 3.47 31806-500 87.20 850 5.22 0.90 5.80 31806-850 124.501500 9.18 0.90 10.20 31806-1500 193.602300 14.13 0.90 15.70 31806-2300 292.20

concrete heating matbH-Im





sleeveless splice


calculated width

conc

rete

hea

ting

mat

s180 W/m² 230 v

240 W/m² 230 v

accessories


* Insulation Ptfe

19



292 1.62 0.90 1.80 31323-292* 80.10 373 2.07 0.90 2.30 31323-373* 91.20 745 4.14 0.90 4.60 31323-745* 147.801580 8.78 0.90 9.75 31323-1580* 274.401993 11.07 0.90 12.30 31323-1993* 338.10



374 1.56 0.90 1.73 31324-374* 76.60 734 3.06 0.90 3.40 31324-734* 129.401351 5.63 0.90 6.25 31324-1351* 238.00





mounting / repair set with cold connection cable 1 x 5.00 (1.50 mm²), incl. 1 sleeve for extension 26183 21.00


Plastic fixing nails (standard pack = 100 pcs) 20304 12.90

sensor extension 1.00 m 20090 2.00

concrete heating matbH-Im






thermostats see page 15 and 42.

sleeveless splice


calculated width

conc

rete

hea

ting

cabl

es

nominal voltage ............................................................................................................230 voltoutput ...............................................................................................................................17 W/mcold connection cable .................................................................................................1 x 4.00 (1.00 mm²)minimum installation temperature ........................................................................5 °cmax. temperature outer sheath ...............................................................................65 °csmallest bending radius .............................................................................................5 x daresistance tolerance .................................................................................................... -5 % / +10 %cold / warm splice ........................................................................................................sleeveless, without shrinkable sleeveouter diameter ...............................................................................................................approx. 7.50 mmInsulation ..........................................................................................................................Ptfe to 395 W, XlPe from 400 W

technical data

27 W/m

accessories


br- Im concre te HeatIng cables sleeveless

With single-end connection cable and sleeveless splice. Ideal for melting ice and snow in out-door areas as well as for installation in concrete and sand for melting snow and ice. likewise suitable for outdoor areas, e.g. stairways.

20

br-Im concrete heating cables

Heating output W element length m order no. Price/pce €

193 6.90 37710-6,90* 22.40 291 10.40 37710-10,40* 29.50 395 14.15 37710-14,15* 37.50








distance bars (mounting bars) 20063 1.04


concrete heating cables br-Im

distance bars for concrete heating cables



* Insulation Ptfesleeveless

splice

17 W/mbr-Im concrete heating cables


400 24.77 37710-24,77 44.90 500 31.04 37710-31,04 52.20 600 34.74 37710-34,74 57.50 700 40.59 37710-40,59 60.20 850 49.35 37710-49,43 67.601000 58.11 37710-58,11 78.901250 72.71 37710-72,71 88.101500 87.32 37710-87,32 100.001700 99.00 37710-99,00 108.101900 110.69 37710-110,69 120.702100 122.37 37710-122,37 127.502300 134.05 37710-134,05 134.302600 151.58 37710-151,58 140.303356 197.00 37710-197,00** 177.403719 218.80 37710-218,80** 194.704249 249.00 37710-249,00** 216.60

** with shrinkable sleeve.

conc

rete

hea

ting

cabl

es

accessories


21

br- Im-Z concre te HeatIng cables sleeveless

With double-end connection cable and sleeveless splice. Ideal for melting ice and snow in out-door areas as well as for installation in concrete and sand for melting snow and ice. likewise suitable for outdoor areas, e.g. stairways.

nominal voltage ............................................................................................................230 voltoutput ...............................................................................................................................17 W/mcold connection cable .................................................................................................2 x 2.50 (1.00 mm²)minimum installation temperature ........................................................................5 °cmax. temperature outer sheath ..................................................................................... 65 °csmallest bending radius .............................................................................................5 x daresistance tolerance .................................................................................................... -5 % / +10 %cold / warm splice ........................................................................................................sleeveless, without shrink technologyouter diameter ...............................................................................................................approx. 7.00 mmInsulation ..........................................................................................................................Ptfe up to 410 W, XlPe from 510 W

technical data

17 W/mbr-Im-Z concrete heating cables


310 18.07 37720-18,07* 30.40 410 24.24 37720-24,24 35.60 510 30.42 37720-30,42 40.80 600 34.55 37720-34,55 43.20 700 41.09 37720-41,09 44.80 850 49.61 37720-49,61 50.801000 59.15 37720-59,15 58.401260 74.28 37720-74,28 64.701530 89.34 37720-89,34 75.601750 101.88 37720-101,88 82.901980 111.79 37720-111,79 94.802200 124.59 37720-124,59 99.802430 136.06 37720-136,06 105.902780 163.34 37720-163,34 118.20


cold connection cable for extension 1 x 1.50 mm², 1.00 m, black 81101-1,50 sW 3.70



mounting / repair set with cold connection cable 1 x 5.00 m, incl. 1 sleeve for extension 26185 19.00




concrete heating cables br-Im-Z




* Insulation Ptfe

sleeveless splice

22

Hem system® HeatIng mats and cables for outdoor areas for asphalt, concrete, screed and sand

Hea

ting

for o

utdo

or a

reas

Practical!

economical!


23

Paths, bridges, garage entrances, outdoor stairways, ramps, hospital entrances, heliports - many areas have to be kept free of snow and ice in winter for the safe movement of vehicles and people. Hemstedt® offers reliable electrical outdoor area heating systems for asphalt, concrete, screed and sand. they guarantee the reliable melting of snow and ice and prevent the formation of snow covered and icy surfaces.

the 80 cm wide mats have an effective width of 90 cm and are operated at 230 or 400 v. the connection load at 7 cm installation depth is 300 W/m², 400 W/m² at a greater depth or in other climatic zones.

application area: concrete, screed and sandthe outdoor area heating mats are rugged and designed for installation in concrete and sand surfaces. a reinforced “shakeproof” design is available.

application area: asphaltHemstedt® is offering heating mats with a short-time temperature resistance up to 240 °c.

the heating cables are also available as fully pre-assembled reels.

Hea

ting

for o

utdo

or a

reas

safe surfaces for veHIcles and PatHs, snoW and Ice free trouble-free installation, easy handling

concrete, screed and sand PageHeating mats and concrete heating cables 24concrete heating cables, shakeproof 26asphaltasphalt heating mats and asphalt heating cables 31


direct from the manufacturer factory tested 100 % waterproof sleeveless 100 % electrical safety With single and double end

connection cable

bHf-Im heating mats


891 2.21 0.90 2.45 31850-891 69.901068 2.67 0.90 2.97 31850-1068 83.001350 3.38 0.90 3.75 31850-1350 85.801593 4.05 0.90 4.50 31850-1593 103.301905 4.76 0.90 5.29 31850-1905 114.102430 6.08 0.90 6.75 31850-2430 136.70

Hea

ting

for o

utdo

or a

reas bHf-Im HeatIng mats

brf-Im concrete HeatIng cables outdoor area heating, sleeveless

300 W/m² 230 v · supplied width approx. 0.80 m


Hem system® Heating mats and concrete heating cables with single-end connection cable and sleeveless splice. only for outdoor areas!!! Ideal for melting ice and snow in outdoor areas as well as for installation in concrete and sand for melting snow and ice. not for hot asphalt.

nominal voltage ............................................................................................................230 voltoutput ...............................................................................................................................27 W/mcold connection cable .................................................................................................1 x 7.00 (1.00 mm²)minimum installation temperature ........................................................................5 °cmax. temperature outer sheath (colour red) ............................................................ 6 5 °csmallest bending radius .............................................................................................5 x daresistance tolerance .................................................................................................... -5 % / +10 %cold / warm splice ........................................................................................................sleeveless, without shrink technologydiameter ...........................................................................................................................approx. 7.50 mmInsulation ..........................................................................................................................XlPe supplied width ...............................................................................................................0.80 mcalculated width ............................................................................................................0.90 m

technical data

bHf-Im heating mats brf-Im concrete heating cables

Heat output W

surface area m²

calculated width m

matlength m

order no. Price €

element length m


891 2.97 0.90 3.30 31800-891 73.30 32.15 m 37731-32,15 62.401068 3.56 0.90 3.95 31800-1068 83.40 38.10 m 37731-38,10 70.901350 4.50 0.90 5.00 31800-1350 100.30 48.29 m 37731-48,29 84.901593 5.31 0.90 5.90 31800-1593 121.30 57.64 m 37731-57,64 102.901905 6.35 0.90 7.05 31800-1905 135.90 68.69 m 37731-68,69 114.302430 8.10 0.90 9.00 31800-2430 168.90 87.38 m 37731-87,38 141.60

accessories


Heating matbHf-Im

concrete heating cablesbrf-Im

24





mounting / repair set with cold connection cable 1 x 5.00 m (1.50 mm²), incl. 1 sleeve for extension 26183 21.00





Please note:

only suitable for

winter outdoor use!







sleeveless splice


calculated width

Hea

ting

for o

utdo

or a

reasbHf-Im-s HeatIng mats

outdoor area heating system, sleeveless

Hem system® Heating mats with single-end connection cable and sleeveless splice. only for outdoor areas!!! Ideal for melting ice and snow in outdoor areas as well as for installation in concrete and sand for melting snow and ice.

nominal voltage ............................................................................................................230 voltoutput ...............................................................................................................................300 400 W/m²cold connection cable .................................................................................................1 x 7.00 (1.00 mm²)minimum installation temperature ........................................................................5 °cmax. temperature outer sheath (colour red) ............................................................ 6 5 °csmallest bending radius .............................................................................................5 x daresistance tolerance .................................................................................................... -5 % / +10 %cold / warm splice ........................................................................................................sleeveless, without shrink technologydiameter ...........................................................................................................................approx. 7.00 mmInsulation ..........................................................................................................................XlPesupplied width ...............................................................................................................0.50 mcalculated width ............................................................................................................0.60 m

technical data

€

accessories

€order no.


Heating matbHf-Im-s

25











Please note:

only suitable for

winter outdoor use!Please note:

only suitable for

winter outdoor use!








bHf-Im-s heating mats


891 3.00 0.60 5.00 31851-891 71.111068 3.57 0.60 5.95 31851-1068 81.641350 4.50 0.60 7.50 31851-1350 97.331593 5.40 0.60 9.00 31851-1593 117.721905 6.36 0.60 10.60 31851-1905 131.442430 8.10 0.60 13.50 31851-2430 163.78

bHf-Im-s heating mats


891 2.19 0.60 3.65 31852-891 67.351068 2.58 0.60 4.30 31852-1068 80.891350 3.27 0.60 5.45 31852-1350 83.491593 3.99 0.60 6.50 31852-1593 100.711905 4.65 0.60 7.75 31852-1905 110.932430 5.91 0.60 9.85 31852-2430 133.42

sleeveless splice


calculated width










Hea

ting

for o

utdo

or a

reas bHf HeatIng mats

brf concrete HeatIng cables outdoor area heating, sleeveless

300 W/m² 400 v supplied width approx. 0.80 m

400 W/m² 400 v supplied width approx. 0.80 m

Hem system® Heating mats and concrete heating cables with single-end connection cable and sleeveless splice. only for outdoor areas!!! Ideal for melting ice and snow in outdoor areas as well as for installation in concrete and sand for melting snow and ice. not for hot asphalt.

nominal voltage ............................................................................................................400 voltoutput ...............................................................................................................................approx. 37 W/mcold connection cable .................................................................................................1 x 7.00 (1.00 mm²)minimum installation temperature ........................................................................5 °cmax. temperature outer sheath (colour red) ............................................................ 65 °c 5 °csmallest bending radius .............................................................................................5 x daresistance tolerance .................................................................................................... -5 % / +10 %cold / warm splice ........................................................................................................sleeveless, without shrink technologydiameter ...........................................................................................................................approx. 7.50 mmInsulation ..........................................................................................................................Ptfesupplied width ...............................................................................................................0.80 mcalculated width ............................................................................................................0.90 m

technical data

bHf heating mats brf concrete heating cables

Heat output W

surface area m²

calculated width m

matlength m


element length m


1068 3.56 0.90 3.95 31900-1068 121.70 28.47 m 37703-28,47 103.401350 4.50 0.90 5.00 31900-1350 147.10 36.29 m 37703-36,29 124.501554 5.18 0.90 5.75 31900-1554 161.60 41.50 m 37703-41,50 136.601878 6.26 0.90 6.95 31900-1878 188.60 50.18 m 37703-50,18 159.202322 7.74 0.90 8.60 31900-2322 220.40 62.34 m 37703-62,34 185.202862 9.54 0.90 10.60 31900-2862 259.70 76.24 m 37703-76,24 218.603321 11.07 0.90 12.30 31900-3321 295.40 89.27 m 37703-89,27 247.603726 12.42 0.90 13.80 31900-3726 329.10 99.69 m 37703-99,69 274.004158 13.86 0.90 15.40 31900-4158 356.90 110.89 m 37703-110,98 297.00

accessories

Heating matbHf

concrete heating cablesbrf


Please note:

only suitable for

winter outdoor use!





26

bHf heating mats


1068 2.67 0.90 2.97 31910-1068 109.201350 3.38 0.90 3.75 31910-1350 126.001554 3.89 0.90 4.32 31910-1554 141.101878 4.70 0.90 5.22 31910-1878 155.202322 5.81 0.90 6.45 31910-2322 200.602862 7.16 0.90 7.95 31910-2862 235.903321 8.31 0.90 9.23 31910-3321 271.703726 9.32 0.90 10.35 31910-3726 301.004158 10.40 0.90 11.55 31910-4158 331.40


sleeveless splice


calculated width










Hea

ting

for o

utdo

or a

reas

accessories


Hem system® Heating mats with single-end connection cable and sleeveless splice. only for outdoor areas!!! Ideal for melting ice and snow in outdoor areas as well as for installation in concrete and sand for melting snow and ice.

nominal voltage ............................................................................................................400 voltoutput ...............................................................................................................................300 400 W/m²cold connection cable .................................................................................................1 x 7.00 (1.00 mm²)minimum installation temperature ........................................................................5 °cmax. temperature outer sheath (colour red) ............................................................ 65 °c 5 °csmallest bending radius .............................................................................................5 x daresistance tolerance .................................................................................................... -5 % / +10 %cold / warm splice ........................................................................................................sleeveless, without shrink technologydiameter ...........................................................................................................................approx. 7.50 mmInsulation ..........................................................................................................................Ptfesupplied width ...............................................................................................................0.50 mcalculated width ............................................................................................................0.60 m

technical data

bHf-s HeatIng mats With single-end connection cable and sleeveless splice



bHf-s heating mats


1068 3.63 0.60 6.05 31912-1068 118.661350 4.62 0.60 7.70 31912-1350 142.781554 5.28 0.60 8.80 31912-1554 156.221878 6.36 0.60 10.60 31912-1878 182.492322 7.92 0.60 13.20 31912-2322 212.992862 9.66 0.60 16.10 31912-2862 251.163321 11.34 0.60 18.90 31912-3321 285.073726 12.66 0.60 21.10 31912-3726 316.974158 14.04 0.60 23.40 31912-4158 344.48

bHf-s heating mats


1068 2.67 0.60 4.45 31913-1068 106.221350 3.38 0.60 5.63 31913-1350 122.711554 3.90 0.60 6.50 31913-1554 136.641878 4.68 0.60 7.80 31913-1878 150.842322 5.82 0.60 9.70 31913-2322 193.822862 7.11 0.60 11.85 31913-2862 228.343321 8.31 0.60 13.85 31913-3321 263.413726 9.30 0.60 15.50 31913-3726 291.584158 10.38 0.60 17.30 31913-4158 321.69

Heating matbHf-s




Please note:

only suitable for

winter outdoor use!



sleeveless splice


calculated width

conc

rete

hea

ting

cabl

es br- Im concre te HeatIng cables sleeveless

With single-end connection cable and sleeveless splice. Ideal for melting ice and snow in out-door areas as well as for installation in concrete and sand for melting snow and ice. likewise suitable for outdoor areas, e.g. stairways.




sleeveless splice

nominal voltage ............................................................................................................230 voltoutput ...............................................................................................................................17 W/mcold connection cable .................................................................................................1 x 4.00 (1.00 mm²)minimum installation temperature ........................................................................5 °cmax. temperature outer sheath ...............................................................................65 °csmallest bending radius .............................................................................................5 x daresistance tolerance .................................................................................................... -5 % / +10 %cold / warm splice ........................................................................................................sleeveless, without shrinkable sleeveouter diameter ...............................................................................................................approx. 7.50 mmInsulation ..........................................................................................................................Ptfe to 395 W, XlPe from 400 W

technical data

27 W/m

accessories




193 6.90 37710-6,90* 22.40 291 10.40 37710-10,40* 29.50 395 14.15 37710-14,15* 37.50











* Insulation Ptfe

17 W/mbr-Im concrete heating cables


400 24.77 37710-24,77 44.90 500 31.04 37710-31,04 52.20 600 34.74 37710-34,74 57.50 700 40.59 37710-40,59 60.20 850 49.35 37710-49,43 67.601000 58.11 37710-58,11 78.901250 72.71 37710-72,71 88.101500 87.32 37710-87,32 100.001700 99.00 37710-99,00 108.101900 110.69 37710-110,69 120.702100 122.37 37710-122,37 127.502300 134.05 37710-134,05 134.302600 151.58 37710-151,58 140.303356 197.00 37710-197,00** 177.403719 218.80 37710-218,80** 194.704249 249.00 37710-249,00** 216.60

** with shrinkable sleeve.

conc

rete

hea

ting

cabl

es

accessories


29

br- Im-Z concre te HeatIng cables sleeveless splice

With double-end connection cable and sleeveless splice. Ideal for melting ice and snow in out-door areas as well as for installation in concrete and sand for melting snow and ice. likewise suitable for outdoor areas, e.g. stairways.

nominal voltage ........................................................................................... 230 voltoutput .............................................................................................................. 17 W/mcold connection cable ................................................................................ 2 x 2.50 (1.00 mm²)minimum installation temperature ....................................................... 5 °cmax. temperature outer sheath ....................................................................65 °csmallest bending radius ............................................................................ 5 x daresistance tolerance ................................................................................... -5 % / +10 %cold / warm splice ....................................................................................... sleeveless splice, without shrink technologyouter diameter .............................................................................................. approx. 7.00 mmInsulation ......................................................................................................... Ptfe up to 310 W, XlPe from 410 W

technical data

17 W/mbr-Im-Z concrete heating cables


310 18.07 37720-18,07* 30.40 410 24.24 37720-24,24 35.60 510 30.42 37720-30,42 40.80 600 34.55 37720-34,55 43.20 700 41.09 37720-41,09 44.80 850 49.61 37720-49,61 50.801000 59.15 37720-59,15 58.401260 74.28 37720-74,28 64.701530 89.34 37720-89,34 75.601750 101.88 37720-101,88 82.901980 111.79 37720-111,79 94.802200 124.59 37720-124,59 99.802430 136.06 37720-136,06 105.902780 163.34 37720-163,34 118.20





mounting / repair set with cold connection cable 1 x 5.00 m, incl. 1 sleeve for extension 26185 19.00




br-Im-Z concrete heating cables




* Insulation Ptfe

sleevelesssplice

Hea

ting

for o

utdo

or a

reas

30

br-r concre te HeatIng cables shakeproof, sleeveless

Hem system® Heating cables with single-end connection cable and sleeveless splice. Heating cables can be fastened directly on the reinforcement.

the installation must only be carried out in concrete structures used for heating outdoor areas and with temperature monitoring (frost protection only!).

nominal voltage ............................................................................................................400 voltoutput ...............................................................................................................................44 W/mcold connection cable .................................................................................................1 x 7.00 m minimum installation temperature ........................................................................5 °cmax. temperature outer sheath ...............................................................................80 °csmallest bending radius .............................................................................................5 x daresistance tolerance .................................................................................................... -5 % / +10 %cold / warm splice ........................................................................................................sleeveless, without shrinkable sleeveouter diameter ...............................................................................................................approx. 10.50 mmInsulation ..........................................................................................................................Ptfe

technical data

44 W/m 400 v

accessories


br-r concrete heating cables, shakeproof

Heating output W element length m order no. Price/pce € 1469 33.35 37790-33,35 220.202037 46.25 37790-46,25 282.403100 70.40 37790-70,40 422.003613 82.00 37790-82,00 441.204044 91.80 37790-91,80 484.104507 102.30 37790-102,30 567.60







1 set of sleeves with cold connection cable 5.00 x m 26189 33.10




concrete heating cables br-r



sleeveless splice

Hea

ting

for o

utdo

or a

reas


gH mastIc asPHalt HeatIng mats gr mastIc asPHalt HeatIng cables outdoor area heating system, sleeveless

300 W/m² 400 v

Hem system® mastic asphalt heating mats and mastic asphalt heating cables with single-end connection cables can be used for stairways, garage entrances, bridges as well as for installation in sand and screed.

nominal voltage ............................................................................................................400 voltoutput ...............................................................................................................................37 W/mcold connection cable .................................................................................................1 x 7.00 (1 00 mm²)minimum installation temperature ........................................................................5 °cmax. temperature outer sheath ...............................................................................90 °cInstallation temperature ............................................................................................. short term 240 °csmallest bending radius .............................................................................................5 x daresistance tolerance .................................................................................................... -5 % / +10 %cold / warm splice ........................................................................................................sleeveless, without shrinkable sleevediameter ...........................................................................................................................approx. 8.00 mmInsulation ..........................................................................................................................Ptfesupplied width ...............................................................................................................0.80 mcalculated width ............................................................................................................0.90 m

technical data

accessories

gH mastic asphalt heating mats gr mastic asphalt heating cables

Heat output W

surface area m²

calculated width m

matlength m


element length m


1068 3.56 0.90 3.95 31269-1068 162.10 28.47 36603-28,47 137.701350 4.50 0.90 5.00 31269-1350 194.10 36.29 36603-36,29 164.601554 5.18 0.90 5.75 31269-1554 216.80 41.50 36603-41,50 182.901878 6.26 0.90 6.95 31269-1878 250.50 50.18 36603-50,18 210.402322 7.74 0.90 8.60 31269-2322 300.40 62.34 36603-62,34 251.902862 9.54 0.90 10.60 31269-2862 358.20 76.24 36603-76,24 298.303321 11.07 0.90 12.30 31269-3321 406.30 89.27 36603-89,27 337.303726 12.42 0.90 13.80 31269-3726 453.00 99.69 36603-99,69 375.804158 13.86 0.90 15.40 31269-4158 492.00 110.98 36603-110,98 411.20


cold connection cable for extension 3 x 1.50 mm², 1.00 m, black 80407-1,00 4.70

cold connection cable for extension 3 x 2.50 mm², 1.00 m, black 80407-2,50 5.10


mounting / repair set with cold connection cable 1 x 5.00 m (1,50 mm²), incl. 1 sleeve for extension 26128 24.30







mastic asphalt heating matgH

mastic asphalt heating cables gr

distance bars for mastic asphalt heating cables




sleeveless splice


calculated width

32

Hem system ® self-monItorIng HeatIng cable for PIPIng frost protection heating cable with plug

Pipe

hea

ting

elem

ents

· fro

st p

rote

ctio

n he

atin

g el

emen

ts

at + 5 °c on

at +15 °c off

33

the Hem heating cable is designed for heating metal or plastic water pipes that are subject to freezing down to -20 °c. It is self-monitoring, prevents impermissible cooling and general frost damage, and ensures a minimum temperature, e.g. for the supply of drinking water to animals outdoors and in stables. a thermostat monitors the point on the pipe suspected of having the lowest temperature. for frost protection the heating cable is activated at + 5 °c and is deactivated when the temperature exceeds + 15 °c. benefit: the required electrical energy is automati-cally kept to a minimum.

all in one: fitted quickly and effortlessly

the Hem system® heating cable is fixed loosely with slight bends, preferably along the bottom of the pipe. at locations requiring additional energy such as valves, some loosely placed windings of the heating cable for the required energy supply. the cable is fixed with adhesive aluminium tape or loosely fitted with temperature resistant plastic cable binders. Plastic pipes must be wrapped beforehand in aluminium foil.an industry standard heat insulation layer at least 20 mm thick not only guarantees the functioning of the heating cable but also reduces the heat requirement. simply plug in and frost protection is guaranteed.

a mInImum of energy for tHe maXImum In frost Protec tIon Plug and heat – reliable frost protection

Pipe

hea

ting

elem

ents

· fr

ost p

rote

ctio

n he

atin

g el

emen

tsthe sleeveless splice is absolutely waterproof and therefore ideal for installations requiring moisture proofing.

direct from the manufacturer factory tested 100 % waterproof sleeveless ready to plug 100 % electrical safety vde approval With single-end connection cable

frost protection heating elements Pagefs frost protection heating element 34with temperature regulator and earthed plug

fse frost protection heating element export variant 35

f frost protection heating element 36without temperature regulator and without earthed plugfe frost protection pipe heating element 37without temperature regulator and without earthed plug


thermostat mounting band

Insulation

Heating cable

Insulation

mounting band

Plug

34

Pipe

hea

ting

elem

ents

· fr

ost p

rote

ctio

n he

atin

g el

emen

ts fs frost ProtectIon PIPe HeatIng element With temperature regulator and earthed plug

approx. 10 W/m

Heating cable with single-end cold connection cable, earthed plug and temperature regulator,+5 °c on / +15 °c off; 10 W/m Hem system® heating cables installed along water pipesprevent impermissible cooling and also protect the supply of drinking water to animals out-doors and in stables.

nominal voltage ............................................................................................................230 voltoutput ...............................................................................................................................approx. 10 W/mcold connection cable .................................................................................................1 x 2.00 mminimum installation temperature ........................................................................5 °cnominal temperature ..................................................................................................65 °ctemperature regulator 16 a ......................................................................................+5 °c on / +15 °c offsmallest bending radius .............................................................................................5 x daresistance tolerance .................................................................................................... -5 % / +10 %approval (heating cable) ............................................................................................vdecold/warm splice ...........................................................................................................sleevelessouter diameter ...............................................................................................................approx. 9.00 mm

technical data

accessories


fs frost protection heating element, ready to connectvoltage v output W length m kg/reel order no. Price/pce €

230 10 1 0.26 35602-01 43.10230 20 2 0.32 35602-02 47.50230 30 3 0.40 35602-03 50.60230 40 4 0.48 35602-04 55.20230 50 5 0.55 35602-05 58.60230 60 6 0.60 35602-06 61.30230 70 7 0.68 35602-07 64.80230 80 8 0.75 35602-08 68.70230 90 9 0.80 35602-09 73.30230 100 10 0.90 35602-10 75.20230 120 12 1.07 35602-12 78.90230 140 14 1.20 35602-14 86.20230 180 18 1.47 35602-18 93.40230 220 22 1.77 35602-22 99.40230 240 24 1.86 35602-24 109.90230 280 28 2.24 35602-28 113.90230 320 32 2.24 35602-32 124.40230 360 36 2.70 35602-36 140.70230 480 48 3.50 35602-48 188.00230 500 50 3.66 35602-50 195.80230 600 60 4.02 35602-60 235.30


aluminium mounting band 20084 31.80

sign with text "electrically heated” 20085 1.30

meshed band 20086 21.40


sleeveless splice

frost protection pipe heating element fs

35

Pipe

hea

ting

elem

ents

· fr

ost p

rote

ctio

n he

atin

g el

emen

tsfse frost ProtectIon PIPe HeatIng element With temperature regulator and earthed plug

approx. 17 W/m

Heating cable with single-end cold connection cable, earthed plug and temperature regulator,+5 °c on / +15 °c off; 17 W/m Hem system® heating cables along water pipesprevent impermissible cooling and also protect the supply of drinking water to animals out-doors and in stables.

nominal voltage ............................................................................................................230 voltoutput ...............................................................................................................................approx. 17 W/mcold connection cable .................................................................................................1 x 2.00 mminimum installation temperature ........................................................................5 °cnominal temperature ..................................................................................................65 °ctemperature regulator 16 a ......................................................................................+5 °c on / +15 °c offsmallest bending radius .............................................................................................5 x daresistance tolerance .................................................................................................... -5 % / +10 %cold/warm splice connection ...................................................................................sleevelessouter diameter ...............................................................................................................approx. 9.00 mm

technical data

accessories


fse frost protection heating element, ready to connectvoltage v output W length m kg/reel order no. Price/pce €

230 17 1 0.26 35606-01 45.60230 34 2 0.32 35606-02 50.10230 51 3 0.40 35606-03 53.20230 68 4 0.48 35606-04 57.80230 85 5 0.55 35606-05 61.20230 102 6 0.60 35606-06 63.90230 119 7 0.68 35606-07 67.40230 136 8 0.75 35606-08 71.30230 153 9 0.80 35606-09 75.90230 170 10 0.90 35606-10 77.80230 204 12 1.07 35606-12 81.50230 238 14 1.20 35606-14 88.80230 306 18 1.47 35606-18 92.70230 374 22 1.77 35606-22 101.90230 408 24 1.86 35606-24 112.50230 476 28 2.24 35606-28 116.40230 544 32 2.24 35606-32 108.40230 612 36 2.70 35606-36 143.20230 816 48 3.50 35606-48 190.50230 850 50 3.66 35606-50 198.40230 1020 60 4.02 35606-60 237.80






export variant

sleeveless splice

frost protection pipe heating element fse

as of 03 /11. subject to alterations. all prices not including vat. www.hemstedt.com

Pipe

hea

ting

elem

ents

· fr

ost p

rote

ctio

n he

atin

g el

emen

ts f frost ProtectIon PIPe HeatIng element Without temperature regulator and without earthed plug

approx. 10 W/m

Heating cable with single-end connection cable. Hem system® Heating cables without fixed connection in conjunction with controller and temperature sensor, layed along water pipes, prevent impermissible cooling and also protect the supply of drinking water to animals out-doors and in stables.

nominal voltage ............................................................................................................230 voltoutput ...............................................................................................................................approx. 10 W/mcold connection cable .................................................................................................1 x 2.00 mminimum installation temperature ........................................................................5 °cnominal temperature ..................................................................................................65 °csmallest bending radius .............................................................................................5 x daresistance tolerance .................................................................................................... -5 % / +10 %cold / warm splice ........................................................................................................sleeveless, without shrinkable sleeveouter diameter ...............................................................................................................approx. 9.00 mm

technical data

accessories


f frost protection heating elementvoltage v output W length m order no. Price/pce €

230 10 1 35600-01 40.00230 20 2 35600-02 44.10230 30 3 35600-03 47.00230 40 4 35600-04 50.80230 50 5 35600-05 54.00230 60 6 35600-06 56.70230 70 7 35600-07 59.60230 80 8 35600-08 63.00230 90 9 35600-09 66.20230 100 10 35600-10 68.70230 120 12 35600-12 72.10230 140 14 35600-14 79.40230 180 18 35600-18 87.80230 220 22 35600-22 94.50230 240 24 35600-24 102.50230 280 28 35600-28 107.30230 320 32 35600-32 113.50230 360 36 35600-36 128.20230 480 48 35600-48 171.20230 500 50 35600-50 178.40230 600 60 35600-60 214.60

36










control box 0 °c up to +80 °c 2000 W / 230 v with analog regulatorincl. 10.00 m sensor 98406 362.90

spare sensor 10.00 m 94010 28.10



sleeveless splice

frost protection pipe heating element f


Pipe

hea

ting

elem

ents

· fr

ost p

rote

ctio

n he

atin

g el

emen

tsfe frost ProtectIon PIPe HeatIng element Without temperature regulator and without earthed plug

approx. 17 W/m

Heating cable with single-end connection cable. Hem system® Heating cables without fixed connection in conjunction with controller and temperature sensor, layed along water pipes, prevent impermissible cooling and also protect the supply of drinking water to animals out-doors and in stables.

nominal voltage ............................................................................................................230 voltoutput ...............................................................................................................................approx. 17 W/mcold connection cable .................................................................................................1 x 2.00 mminimum installation temperature ........................................................................5 °cnominal temperature ..................................................................................................65 °csmallest bending radius .............................................................................................5 x daresistance tolerance .................................................................................................... -5 % / +10 %cold / warm splice ........................................................................................................sleeveless, without shrinkable sleeveouter diameter ...............................................................................................................approx. 9.00 mm

technical data

accessories


fe frost protection heating elementvoltage v output W length m order no. Price/pce €

230 17 1 35603-01 42.40230 34 2 35603-02 45.30230 51 3 35603-03 48.70230 68 4 35603-04 53.60230 85 5 35603-05 55.80230 102 6 35603-06 58.40230 119 7 35603-07 61.70230 136 8 35603-08 64.10230 153 9 35603-09 69.30230 170 10 35603-10 71.50230 204 12 35603-12 74.80230 238 14 35603-14 83.60230 306 18 35603-18 89.30230 374 22 35603-22 96.40230 408 24 35603-24 104.10230 476 28 35603-28 109.90230 544 32 35603-32 119.20230 612 36 35603-36 131.30230 816 48 35603-48 178.50230 850 50 35603-50 182.50230 1020 60 35603-60 222.70

37










control box 0 °c up to +80 °c 2000 W / 230 v with analog regulatorincl. 10.00 m sensor 98406 362.90

spare sensor 10.00 m 94010 28.10



export variant

sleeveless splice

frost protection pipe heating element fe

> 1 m

38

Hem system ® das roof gut ter HeatIng Heating cable with thermostat for protection from snow and ice

roof

gut

ter h

eatin

g

thermostat

edge guard

Plug, ready-to-use.designed for 230 v ac

sleeveless

splice,

absolutely

waterproof

chemical-resistant

Ptfe insulating

covering

das roof gutter heating


39

Ice on buildings, roof gutters and roof surfaces forms up in winter due to heat losses on buildings and poor exposure to sunlight. the resulting condensation water cannot flow away and freezes. Hem system® das roof gutter heating systems keep the areas at risk reliably free from snow and ice thus preventing:

formation of icicles (danger to persons and property) bursting downpipes freezing of downpipes in frost area (ground) Water penetration into buildings damage to external facades

all in one: fitted quickly and effortlessly

Plug, ready-to-use. With sleeveless splice and chemical-resistant Ptfe insulating covering. Hem system® das roof gutter heating systems have multiple uses for pitched roof areas, semi-circular and box gutters and downpipes. Installation is simple, the electrical connection can also be carried out by unqualified persons. the plug is already made up. for normal semi-circular gutters, the expected energy consumption is approx. 50 to 60 W/m per meter of guttering. this also applies to downpipes that have to be heated up to the frost limit (approx. 1 m in ground area). Important: When calculating the requirement and length, remember that the heating cable may have to be applied several times.

roof

gut

ter h

eatin

g

Hem system ® HeatIng cable WItH tHermostat safety for persons and building

roof gutter heating Pageroof gutter heating 40alarms and regulatorsIce and snow alarms 42frost alarms and regulators 42


direct from the manufacturer factory tested 100 % waterproof sleeveless ready to plug 100 % electrical safety

roof

gut

ter h

eatin

g das roof gut ter HeatIng With temperature regulator and earthed plug

approx. 30 W/m

Hem-system® das roof gutter heating with single-end connection cable, sleeveless splice and chemical-resistant Ptfe insulating covering.

nominal voltage ............................................................................................................230 voltoutput ...............................................................................................................................approx. 30 W/mcold connection cable .................................................................................................1 x 4.00 (1.00 mm²)minimum installation temperature ........................................................................5 °cnominal temperature acc. vde 0253 .....................................................................90 °csmallest bending radius .............................................................................................5 x daresistance tolerance .................................................................................................... -5 % / +10 %cold / warm splice ........................................................................................................sleeveless, without shrinkable sleeveouter diameter ...............................................................................................................approx. 8.20 mmInsulation ..........................................................................................................................Ptfe

technical data

accessories


das roof gutter heatingvoltage v output W length m order no. Price/pce €

230 120 4 38613-04 70.10230 151 5 38613-05 72.60230 196 6 38613-06 74.80230 293 10 38613-10 86.40230 367 12 38613-12 91.40230 419 14 38613-14 103.50230 471 16 38613-16 113.20230 627 20 38613-20 121.00230 700 23 38613-23 137.20230 919 30 38613-30 164.50230 1103 35 38613-35 177.50230 1265 41 38613-41 197.90230 1440 49 38613-49 217.80230 1719 55 38613-55 241.10230 2062 70 38613-70 302.90

40


cross-beam, stainless steel (only roof gutter heating) 20075 9.80

cord grip, stainless steel (only roof gutter heating) 20076 3.50

cord grip, copper (only roof gutter heating) 20070 3.60

support cable (only roof gutter heating) 20074 0.80


roof cable holder for tiled roof 20100 10.10

roof cable holder for seam roof, galvanised 20101 11.70

roof cable holder for seam roof, copper 20102 47.30

edge guard 20103 4.00

socket for outdoor area, IP44 20104 13.10

das roof gutter heating


distance bars for roof gutter heatings

sleeveless splice

roof

gut

ter h

eatin

gda roof gut ter HeatIng

approx. 30 W/m

Hem-system® da roof gutter heating with single-end connection cable, sleeveless splice and chemical-resistant Ptfe insulating covering. also suitable for outdoor areas, e.g. stairways.

nominal voltage ............................................................................................................230 voltoutput ...............................................................................................................................approx. 30 W/mcold connection cable .................................................................................................1 x 4.00 (1.00 mm²)minimum installation temperature ........................................................................5 °cnominal temperature acc. vde 0253 .....................................................................90 °csmallest bending radius .............................................................................................5 x daresistance tolerance .................................................................................................... -5 % / +10 %cold / warm splice ........................................................................................................sleeveless, without shrinkable sleeveouter diameter ...............................................................................................................approx. 8.20 mmInsulation ..........................................................................................................................Ptfe

technical data

accessories


da roof gutter heatingvoltage v output W length m order no. Price/pce €

230 120 4 38612-04 57.10230 151 5 38612-05 59.50230 196 6 38612-06 61.80230 293 10 38612-10 73.40230 367 12 38612-12 78.40230 419 14 38612-14 90.50230 471 16 38612-16 100.10230 627 20 38612-20 107.90230 700 23 38612-23 124.00230 919 30 38612-30 151.20230 1103 35 38612-35 164.30230 1265 41 38612-41 184.70230 1440 49 38612-49 204.30230 1719 55 38612-55 227.80230 2062 70 38612-70 289.60

order no.

41

article designation order no. Price/pce €cold connection cable for extension 3 x 1.50 mm², 1.00 m, black 81302-1,50 bl/sW 4.10cold connection cable for extension 3 x 2.50 mm², 1.00 m, black 81302-2,50 bl/sW 4.60capillary tube regulator 0°c to 55°c / 16 a / 250 v~ 91116 38.10mounting sleeve (1, factory fitted), for extension 26182 5.30mounting / repair set with cold connection cable 1 x 5.00 m (1,50 mm²), incl. 1 sleeve for extension 26183 21.00


cross beam, stainless steel (only roof gutter heating) 20075 9.80cord grip, stainless steel (only roof gutter heating) 20076 3.50cord grip, copper (only roof gutter heating) 20070 3.60support cable (only roof gutter heating) per m 20074 0.80distance bars (mounting bars) 20063 1.04digital ice and snow alarm for universal use 93159 216.80Ice sensor 6.0 m, can be extended up to max. 50 m 93156 111.30frost alarms and regulators for roof gutter heating alternative to order no.93159 93160 105.901.00 m sensor extension for ice sensor 20099 3.601 sleeve for sensor 26185 3.10factory fitted installation sleeve (1 pce) 26121 6.00roof cable holder for tiled roof 20100 10.10roof cable holder for seam roof, galvanised 20101 11.70roof cable holder for seam roof, copper 20102 47.30edge guard 20103 4.00

da roof gutter heating


distance bars for roof gutter heatings

sleeveless splice

tem

pera

ture

regu

lato

r

used in conjunction with one or two combined moisture and temperature sensors, the digital ice and snow alarm has the task of detecting ice and snow early on and keeping the monitored areas clear by switching on a melting device.

this device is a practical / cost-effective alternative to the digital ice and snow alarm and is used for the economical control of roof gutter heating. the critical temperature range is monitored by two regulators so that the heating is only in operation when there is actually a risk of freezing. Heating is only activated in the critical range from -5 °c to +5 °c.

des Ice and snoW alarm digital

fr frost alarm and regulator for roof gutter heating

nominal voltage .....................................................................................1/n/ac, 50 Hz, 230 v, to dIn en 60730voltage range ..........................................................................................230 v +6/-6 % rated output ............................................................................................ approx. 10 va load max. 250 v~, 6 (2) aambient temperature ...........................................................................0 to 50 °c, condensation not permissibledegree of protection............................................................................. II to dIn 57700, .......................................................................................................................when mounted in distribution panel*Weight ...................................................................................................... approx. 0.4 kg

rated voltage ...........................................................................................230 v ac switch current .........................................................................................16 (4) aambient temperature ........................................................................... -30 to +50 °ctemperature range ................................................................................ -20 to -35 °cdegree of protection............................................................................. IP 65dimensions ...............................................................................................122 x 120 x 55 mm contact .......................................................................................................1 nc / 1 no

technical data

technical data



des ice and snow alarm

article designation order no. Price/pce €digital ice and snow alarm (for roof gutters and outdoor areas) 93159 216.80moisture and temperature sensor (for roof gutters) 93156 111.30Ice sensor with 6.00 m supply cable, cable entry from bottom, with protective housing (for outdoor area) 93164 209.70Ice sensor with 6.00 m supply cable, cable entry from side (for outdoor area) 93162 199.10

fr frost alarm and regulator


frost alarms and regulators for roof gutter heating 93160 105.90


not

es

4343

notes


44

Hem system ® HeatIng solutIons for farmIng and gardenIng Heating cable with thermostat for protection from snow and ice

farm

ing

and

gard

enin

g

underfloor heating for animal husbandry

Ptfe slug stop heating

underfloor heating for poly-tunnels and greenhouses

45

underfloor heating for animal husbandry

modern agricultural units increasingly recognise the financial benefits of electrical underfloor heating and trough heating for their livestock. this particularly applies to pig farming, where the partial heating of the sty floor reduces the loss of piglets and is considerably more economical than the use of red lights. Hemstedt® heating cables comply with the requirements for buildings used for farming and can be layed simply in the screed. a unique benefit: the sleeveless, 100 % tight splice prevents the penetration of aggressive waste water and thus any resulting faults.

underfloor heating for poly-tunnels and greenhouses the use of heating cables is becoming an increasing necessity for professional plant growing and propagation. ask us about our solutions and products.

sH-s “sophie” and sH-a “alessa” Ptfe slug stop heating set *

Hem slug stop heating system with single-end connection cable and Ptfe insulation. Particularly affordable price in relation to the used floor space. teflon heating “self-cleaning”– as known from the kitchen.

depending on heating cable length, the “sophie” set contains:

Hem slug stop heating with single-end connection cable transformer screws (4 x 20 mm) clips (Ø 5 mm) brackets (8 pce.) for mounting Weather protection for transformer (not shown, colour variable) Wooden frame

farm

ing

and

gard

enin

g

economIcal HeatIng cables for fleXIble use favourable solutions for increased yield

sH-s Ptfe “sophie” slug stop heatingtransformer v

transformerva

Heating output W

Heating cable m

Wooden frame cm


230/24 180 106 3.30 75 x 75 38020-3,3 144.77230/24 180 138 4.30 100 x 100 38020-4,3 151.11230/24 180 170 5.30 125 x 125 38020-5,3 161.10230/24 250 202 6.30 150 x 150 38020-6,3 178.98

sH-a Ptfe “alessa” slug stop heatingtransformer v

transformerva

Heating output W Heating cable m


230/24 180 106 3.30 38022-3,3 112.67230/24 180 138 4.30 38022-4,3 119.51230/24 180 170 5.30 38022-5,3 126.42230/24 250 202 6.30 38022-6,3 140.85

* the “alessa” and “sophie” sets both without wooden frame

46

Hem system ® HeatIng solutIons for sPorts areas

spor

ts a

reas

47

spor

ts a

reas

element length of e.g. approx. 200 m is also available with cold connection cable and splice.

rated voltage ...........................................................................................400 v

cold connection cable .......................................................................... approx. 2 x 30 m (2,50 mm²)

minimum installation temperature .................................................5 °c

smallest bending radius ......................................................................6 x da

technical data

soil heating with Hemstedt cables

the management and people responsible for sports grounds such as football stadiums or golf courses are increasingly using soil heating systems. the hard frozen ground is thawed, melting any snow covering and lengthening grass growth. sporting activities can thus take place all year round, the season lengthened, as well as ensuring that the ground is dried out faster after heavy precipitation. the risk of injury to players is also considerably reduced.

compared to warm water heating systems, electrical soil heating systems offer considerable benefits such as lower investment and running costs, faster operation and greater efficiency. Hemstedt® heating cables are optimally designed for these demanding requirements. they can be used for heating any grass area. depending on the heating requirement, cables with a 15 – 20 Watt/m output for 230 v or 400 v are available that are designed for the toughest weather conditions.

HeatIng cable for grass areas In stadIums and sPorts grounds for all-year use

dist

ance

bar

s d dIstance bars for fixing heating cables

Heating mats can be created with distance bars. a variable Watt/m2 heating mat production is possible depending on the grid dimensions of the distance bars. examples: Heating mats, heating cables, heating loops.

examples:

Heating mats Heating cables Heating loops

distance barsarticle designation

length m

grid mm

cable diameter mm

bar width mm


ms-1 distance bars ~ 1.00 20 38613-04 8 20060 1.04ms-2 distance bars ~ 1.00 25 38613-05 8 20061 1.04ms-3 distance bars ~ 1.00 25 38613-06 8 20062 1.04ms-4 distance bars ~ 1.00 25 38613-10 8 20063 1.04

48

d distance bars


distance bars

roof gutter

not

es

4949

notes


50

notes

50

not

es


Prices

all prices are quoted excluding vat and other charges.

delivery

goods shall be delivered at the purchasers risk.

terms of payment

unless other terms of payment have been agreed, the invoice sum is payable without deduction within 14 days of the date of the invoice.

the latest version of our general terms and conditions apply in addition to this extract. see: www.hemstedt.com (as of 2011)

Worldwide: direct

as a global player, Hemstedt gmbH supplies and looks after customers and projects together with overseas agents on all continents, directly from the headquarters in brackenheim.

Hemstedt gmbHschleicherweg 19d-74336 brackenheimPhone: +49 (0) 7135 / 9898-0fax: +49 (0) 7135 / 2197mail: [email protected]: www.hemstedt.com

Hemstedt Catalogue

Documents

Transcript of Hemstedt Catalogue