Product management 1 Revision G / 28.11.2017

Check list multiPANEL Customer:

Contact partner:

Phone:

Email address:

Surface coating: Powder coating RAL 9005 deep black matt, fine structure

Front plate: 3mm, silver anodised / silver metallic, Powder coating

Lock and hinge: RAL 9005 deep black matt, fine structure

Decorative inlay surface: Stainless steel inlay V2A

Ingress protection: IP65 / En 60529

Temperature range: -20°C bis +60°C

External dimension max.: 800 x 800mm

External dimension min.: 150 x 150mm

Standard execution

Product management 2 Revision G / 28.11.2017

MPD (multiPANEL-Display with permanently connected front plate)

Alu-Front plate Applicable for glass

Visible front

**Usable area

MPK (multiPANEL-Kommando inset Front plate from the front, rear and direct)

Visible front

**Usable area

Direct installation from panel PC‘s

Alu-Front plate inset from the front

Alu-Front plate inset from the rear

Enclosure HxW: ___________________mm Front plate HxW: _________________mm

Enclosure-/Front plate dimensions H x W

Dimension by installed equipment

Product management 3 Revision G / 28.11.2017

HMI Panel

Others:________________________ Typ:__________________________

_

Rear wall variants

Bolted flush rear wall

Mounting depth 64mm

Bolted door

*(Screws + Hinges)

Mounting depth 64mm

Framed door 15mm

*(Turnbuckle+ Hinges)

Mounting depth 77mm

Framed door 60mm

*(Turnbuckle+ Hinges)

Mounting depth 127mm

*Turnbuckle+Hinges, Side H

Note: If using the version MPK with front plate inset from the rear;

mounting depth is reduced about 8mm.

Circulation of air distance consider?

Further installed eqipment, e.g. switch, push botton and so on.

Product management 4 Revision G / 28.11.2017

Horizontal installation

Mounting on suspension system profiPLUS

Upright version ** Hanging Version **

* Mounting only on bolted flush rear wall

Desk coupling *

** Mounting only on 70mm front profile

Others / Accessories

Handle with stainless steel inlay (Dimension min. 300mm, with coupling min. 625mm)

Emblem by stainless steel inlay

Special colour inkl. rear wall RAL-Classic: _________________________

Special colour front plate RAL-Classic: __________________________

Screen printing

Profile handle

*Keyboard tray Rigid (15° grade) Swiveling, stageless Mouse tray

(*Enclosure amplitude min. 334mm)

*Keyboard tray shortened (380mm) for keyboards with a trackball

Digital printing Emblem by front plate

VESA 75 *

VESA 100 *

Down (only without panel coupling) on both sides

*Wall joint

*Socket joint

A

A

*Not for over-head assembling

A

Signal light adaption

Support profile 1 B

250mm

500mm

750mm

1000mm

1500mm

Intermediate joint

Support profile 2 D

250mm

500mm

750mm

1000mm

1500mm

Please note: Maximum system lenght 2m

___________mm ___________mm

C Elbow

Signal light adaption

E

B C D

E

*Socket joint smart

*Wall joint smart

A

A

Socket joint profile

adjustment smart

Wall joint profile

adjustment smart

Universal socket joint

adjustment smart

Universal wall joint

adjustment smart

Product management 5 Revision G / 28.11.2017

Vertical installation

Support profil 1 B

Signal light adaption D

250mm

500mm

750mm

1000mm

1500mm

Support profil 2 C

250mm

500mm

Elbow

___________mm

___________mm

A

F

D E

**Wall joint, vertical **Socket joint, vertical **Base

**It‘s not allowed with intermediate joint!

B

C

Elbow

D

Support profil 3 F

250mm

500mm

750mm

1000mm

___________mm

E

Signal light adaption E

A A A

Needle bearing, optional

*Panel coupling Elbow panel coupling *Panel coupling N

hanging upright hanging upright hanging upright

G

Elbow panel coupling N

hanging upright

Enclosure couplings G /F

F

L = 250mm

L = 500mm

L =750mm

L = 1000mm

L = _________mm

*Profile lenght F Elbow desk coupling N

hanging upright

*Desk coupling N

hanging upright

VESA Adapter