HEAVY TRANSPORT (MULTI AXLE)

HEAVY LIFTING (MOBILE CRANE

& SKY LIFT)

PRIME MOVER & HAULAGE

JACKING & SKIDDING

Primary Membrane Skid onHydraulic Multi Axle Trailerwith self-propelled modular

HEAVY TRANSPORTMULTI AXLE TRAILER,& LIFTING SERVICES

INTRODUCTION

1

During the past 2 years, our experience in heavy lifting has improved in numbers.

ATC team with Tubular Pipe at Tg. Langsat Port, Johor on 15 January 2016

MANPOWER

40PERSONNELS

14

Cometto Team2 teams(7 personnels per team)

4Low Loader Driver

3Skylift Operator

CraneOperator

7Management &Technical Staff

5

Forklift Operator

7

Delivery of Tubular Pipe from Pasir Gudang to Tg. Langsat Port, Johor on 15 January 2016

It all started with internal l i f t ing activit ies inside Asturi. Over the years with wide range of equipments and facilities; that we have possessed, we have decided to strengthten our position by entering open market business via subsidiary Asturi Truck & Crane Sdn. Bhd. (ATC), which we established in December 2009.

Within short period, this subsidiary has created good impact in the East Cost of Malaysia, as we are the only heavy lifting company which have all the facilities stationed in this region (Kuantan).

Due to our strategic location, we are able to provide competitive pricing to all our clients which are based within the facility.

MULTI AXLE TRAILER

• Model : Cometto (Made in Italy)

• 24 line Axle in 4 modular 192 wheelers• 6 Axle 3 units• 6 Axle (Self Propelled) 1 unit• Power Pack (Mercedes) 1 unit• Prime Mover (MAN) 2 units• Turntable 2 units

• Capable of carrying up to 720mt, 100m length & 12.5m height

Multi Axle with Prime Mover

Delivery of Section Scrubber to Pasir Gudang, JohorDelivery of Charge Gas Dryer Vessels to Kerteh, Terengganu

2 2

Hydraulic Multi Axle Trailer with self-propelled deliver Upper Legs at Tg. Langsat Port, Johor

PRIME MOVER& HAULAGE

Delivery of Downstream Cooler using Prime Mover with Low Loader 5 Axle (Flat Bed)

3

The transport fleet ranges from 3 tons Lorry to Low Loader 5 Axle trailers, along with Prime Movers of various rated capacities.

The mix of assets enables the division to meet a variety of haulage needs, whether they related to the movements of equipment, modules or any other loads of different shapes, sizes and weights.

Delivery of Test Separator using Prime Mover with Low Loader 3 Axle (Lower Deck)

Delivery of Tube Bundle using Prime Mover with Low Loader 5 Axle (Lower Deck)

LOW LOADER BRAND CAPACITY

1. Low Loader 5 Axle (Flat Bed) MAN 10518 S.P 50 T2. Low Loader 5 Axle (Lower Deck) SCANIA 11705 S.P 50 T3. Low Loader 5 Axle (Lower Deck) MAN 10518 S.P 50 T4. Low Loader 3 Axle (Lower Deck) MAN 10518 S.P 40 T5. Low Loader 3 Axle (Lower Deck) SCANIA 10600 S.P 40 T

LORRY

1. Lorry HICOM 7 T2. Lorry HICOM 3 T

MOBILE CRANE

Mobile Crane (120 T) in operation at Navy Base Tg. Gelang, Kuantan

4

Joint Venture Basis}

ATC operates an extensive fleet of mobile cranes, ranging from Mobile Cranes to Rough Terrain Cranes. At the higher end of the capacity scale, the division operates Liebherr Mobile Crane of up to 500 T capacity.

CRANE MODEL CAPACITY

1. Mobile Crane TADANO PH PMA 1766 120 T2. Rough Terrain Crane KATO PH PMA 1820 45 T3. Rough Terrain Crane KATO WP PMA 2203 45 T4. Mobile Crane TADANO SL PMA 25211 25 T5. Mobile Crane TADANO WP PMA 11977 25 T6. Mobile Crane TADANO PMA 27792 25 T7. Mobile Crane DEMAG PH PMA 10155 300 T 8. Mobile Crane DEMAG SL PMA 20612 400 T9. Mobile Crane LIEBHERR SL PMA 21038 500 T

Additional Facilities :Additional facilities such as Wire Slings,

Web Slings, Chain Slings and Spreader Bar

for various weight lifting activity.

Wire Slings Spreader BarChain Slings

SKYLIFTS

Skylift (25 M) in operation at Gebeng Industrial Area, Kuantan

1. SL PMA 22718 25 M (TADANO) 4751 S.P

2. WP PMA 10037 18 M (ISUZU) 4334 S.P

ATC offers various range of Skylifts and Forklifts for logistics and warehousing industry, offering clean and robust power with almost maintenance-free operation.

MODEL CAPACITY

JACKING

SKIDDING

ATC also provide innovative solutions to lift and shift tasks.It is recognised that traditional methods may not be the most efficient in certain situations and alternative approaches may be required to achieve the desired result.

One of the alternative methods available is the 1200 tons capacity Hydraulic Jacking System.

HYDRAULIC JACKING

• Hydraulic Jacking up to 1200 tons

• Model : SJ200

• Compact Jack Set - 50 tons

• Super Flat Jack Set - 100 tons

• Compact Jack Set - 150 tons

Additional equipments :1. Jacking Beams up to 450 tons

2. Chengal Wooden Block 820mm (L) x 100mm (H) 100mm (W)

3. Elephant Legs up to 450 tons

4. Stool up to 500 tons

Complete jacking activity on Guard Bed

Arrangement of Dragon Skidding for moving heavy structure

Placing of Chengal Wooden Blocks

Skidding is used for moving and positioning heavy structures on a built up skid track.

A skid shoe is mounted between the structure and the skid track. With the help of a greased skid track, a special designed mechanism pulls the load over the tracks.

DRAGON SKIDDING

5

Jacking Beams

Hydraulic Jacking equipment

Wooden Blocks

Elephant Leg

RELATED SERVICES

OTHER SERVICES

RORO method is used to carry cargo, such as Pressure Vessel or Process Skids that are driven on and off using a self-propelled modular trailer.

RORO Method (Roll-on Roll-off)

Cargo are placed on the stool on the barge deck before shipping.

Lashing process to prevent cargo from falling or moving. Some equipment used are chain block, lever block, shackle and buckle.

Turntable for transporting large and long loads with capacity of 300 tons.

Bundle Puller is used to extract Heat Exchangerfrom its shell with capacity up to 45 tons.

A platform scale that stands flush with a road and used for weighing up to 250 tons of cargo.

Process of machining the faces of flanged and other types of pipe and vessel connectors sizing from 4” up to 75”

Bundle Puller Hydraulic Torque Wrench Weighbridge Flange Facing

On Board Lashing TurntableBarge Deck

6

Used to exert torque on a fastener to tightening or loosening of a nut connection. Nut sizing are from 60mm up to 145mm.

OUR EXPERIENCE

7

Cargo Structure

Length : 23,960 mmWidth : 8,000 mmHeight : 13,000 mm Weight : 130 tons / unit

Quantity : 18 unitsDestination : Gebeng Industrial Area to Kuantan Port, KuantanDelivery Date : 8th October, 15th November & 7th December 2014

Tubular Pipe

Length : 83,500 mmWidth : 1,829 mmHeight : 1,829 mm Weight : 291 tons / unit

Quantity : 20 unitsDestination : Pasir Gudang to Tg. Langsat Port, Johor BahruDelivery Date : 8th January & 12th February 2016

Upper LegLength : 66,000 mmWidth : 7,800 mmHeight : 7,500 mm Weight : 630 tons / unit

Quantity : 4 unitsDestination : Tg. Langsat to Tg. Langsat Port, Johor BahruDelivery Date : 12th - 18th July 2014

HEAVIEST

TALLEST

LONGEST

MuazT : +(60)19 994 2898E : gm@asturitruckcrane.com.my

6(09) 583 38886(019) 994 28986(012) 989 0800

Fatiha T : +(60)12 989 0800E : md@asturitruckcrane.com.my

Lot 74-A, Jln. Gebeng 1/6,Gebeng Industrial Estate,26080 Kuantan, Pahang,MALAYSIA

T : + 6(09) 5833 888F : + 6(09) 5833 999

CONTACT

8

Guard Bed after painting on Multi Axle Trailer with self-propelled modular

Delivery of Hydrogenation Interchanger to Kuantan Port

Delivery of Inlet Separator to Kuantan Port, Pahang

Hanif T : +(60)17 986 8183E : truckcrane@asturi.com.my

Mobile Crane (25 T) lifting a beam at Gebeng Industrial Area, Kuantan

Mobile Crane (120 T) lifting a pressure vessel for blasting and painting activity

Mobile Crane (45 T) lifting a plate from Low Loader

9

ref: atcbrochure/August01/16R2

www.asturitruckcrane.com.my