HEATIT Z-WAVE - domotica para ahorrar...

2
Thermo-Floor AS l Østre Totenvei 24, NO-2816 Gjøvik, NORWAY l Phone: +47 61 18 77 77 l [email protected]www.heatit.com All prices ex vat and ex works, Gjøvik, Norway Ver 2015-B FUNCTIONS Room sensor Floor sensor Temperature limiter Power regulator Z-Wave chip 500 series Weekly program via gateway Setback mode via gateway or pilot wire 7-segment LCD-screen Can be used in connection with different NTC-sensors Lock mode/child lock Backlight Calibration Setback temperature in association with door/window sensor 8 associations CONNECTION CLAMPS Use 1,5mm² or 2,5mm² cables according to power need. TECHNICAL DATA Rated voltage: 230V 50/60Hz Max. load: 3600W Max. current: 16A Power consumption: 1,5W Protection class: IP21 Min/Max installation temp: -20°C to 40°C Min/Max operating temp: 5°C to 40°C Temperature intervals: Floor sensor 5°C to 40°C Room sensor 5°C to 40°C Hysteresis: 0,3°C to 3,0°C Default hysteresis: 0,5°C Sensor values: 0°C 29,1 kOhm 10°C 18,6 kOhm 15°C 15,1 kOhm 20°C 12,2 kOhm 25°C 10,0 kOhm Switch: Single-pole Heatit Z-Wave is an electronic thermostat for flush mounting in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Vera, Zipato and others. The display will show the ambient temperature, either in the room or in the floor. The thermostat is equipped with sensitive cap sense buttons. By lightly pressing the buttons, the display will show the set value. Heatit Z-Wave is equipped with a single-pole switch. The thermostat can handle loads up to 16A/3600W at 230V. If the load is greater than this, the thermostat needs to be connected to a contactor. It can be used with two external temperature sensors. INCLUDED EQUIPMENT: Floor sensor 3m. HEATIT Z-WAVE An innovative thermostat incorporating Z-Wave technology for regulating electric floor heating. 2 yr ART. NO. PRODUCT COLOR 5430499 Heatit Z-Wave thermostat White RAL 9003 5430498 Heatit Z-Wave thermostat Black RAL 9011 5430108 Floor sensor 3mm 6m NTC 10 kOhm 5430109 Floor sensor 4mm 3m NTC 10 kOhm 5430129 External room sensor, mini NTC 10 kOhm White RAL 9003 Black RAL 9011 51,1 15,6 0 11,0 21,3 Made in EU TF 021 HEATING L L N HEATING N PILOT WIRE FLOOR SENSOR EXTERNAL SENSOR 87,0

Transcript of HEATIT Z-WAVE - domotica para ahorrar...

Page 1: HEATIT Z-WAVE - domotica para ahorrar ENERGIAdomoticashop.es/WebRoot/Google/.../con0420988/MediaGallery/pdf/HeatIt.pdf · Mål på Z-wave-logo: 10mm x 8mm 87,0 All prices ex vat an

Thermo-Floor AS l Østre Totenvei 24, NO-2816 Gjøvik, NORWAY l Phone: +47 61 18 77 77 l [email protected] – www.heatit.comAll prices ex vat and ex works, Gjøvik, Norway

Ver 2

015-

B

FUNCTIONS

• Room sensor

• Floor sensor

• Temperature limiter

• Power regulator

• Z-Wave chip 500 series

• Weekly program via gateway

• Setback mode via gateway or pilot wire

• 7-segment LCD-screen

• Can be used in connection with different NTC-sensors

• Lock mode/child lock

• Backlight

• Calibration

• Setback temperature in association with door/window sensor

• 8 associations

CONNECTION CLAMPS Use 1,5mm² or 2,5mm² cables according to power need.

TECHNICAL DATARated voltage: 230V 50/60HzMax. load: 3600WMax. current: 16APower consumption: 1,5WProtection class: IP21Min/Max installation temp: -20°C to 40°CMin/Max operating temp: 5°C to 40°CTemperature intervals: Floor sensor 5°C to 40°C Room sensor 5°C to 40°CHysteresis: 0,3°C to 3,0°CDefault hysteresis: 0,5°CSensor values: 0°C 29,1 kOhm 10°C 18,6 kOhm 15°C 15,1 kOhm 20°C 12,2 kOhm 25°C 10,0 kOhmSwitch: Single-pole

Heatit Z-Wave is an electronic thermostat for flush mounting in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Vera, Zipato and others.

The display will show the ambient temperature, either in the room or in the floor. The thermostat is equipped with sensitive cap sense buttons. By lightly pressing the buttons, the display will show the set value.

Heatit Z-Wave is equipped with a single-pole switch. The thermostat can handle loads up to 16A/3600W at 230V. If the load is greater than this, the thermostat needs to be connected to a contactor. It can be used with two external temperature sensors.

INCLUDED EQUIPMENT:

Floor sensor 3m.

HEATIT Z-WAVEAn innovative thermostat incorporating Z-Wave technology for regulating electric floor heating.

2 yr

ART. NO. PRODUCT COLOR

5430499 Heatit Z-Wave thermostat White RAL 9003

5430498 Heatit Z-Wave thermostat Black RAL 9011

5430108 Floor sensor 3mm 6m NTC 10 kOhm

5430109 Floor sensor 4mm 3m NTC 10 kOhm

5430129 External room sensor, mini NTC 10 kOhm

White RAL 9003 Black RAL 9011

51,1

15,6 0

11,0

21,3

Made in EUTF 021

HEATING L L N

HEATING N

PILOT WIRE

FLOORSENSOR

EXTERNAL

SENSOR

Mål på Z-wave-logo: 10mm x 8mm

87,0

Page 2: HEATIT Z-WAVE - domotica para ahorrar ENERGIAdomoticashop.es/WebRoot/Google/.../con0420988/MediaGallery/pdf/HeatIt.pdf · Mål på Z-wave-logo: 10mm x 8mm 87,0 All prices ex vat an

Thermo-Floor AS l Østre Totenvei 24, NO-2816 Gjøvik, NORWAY l Phone: +47 61 18 77 77 l [email protected] – www.heatit.comAll prices ex vat and ex works, Gjøvik, Norway

Floor sensor 3mmLength: 6m

Floor sensor 4mmLength: 3m

External room sensor, miniDimensions: 40x60x47mm

Art. no: 5430108 Art. no: 5430109 Art. no: 5430129

ART. NO. PRODUCT COLOR EAN-NO. EU FREQUENCY RU FREQUENCY

5430499 Heatit Z-Wave thermostat White RAL 9003 7071236011934 EU 868,4 RU 869

5430498 Heatit Z-Wave thermostat Black RAL 9011 7071236011927 EU 868,4 RU 869

5430108 Floor sensor 3mm 6m 7071236007739

5430109 Floor sensor 4mm 3m 7071236005353

5430129 External room sensor, mini 7071236008293

2 yr