Heat Recovery - Siemens Energy AG
7
Heat Recovery Siemens Energy B.V. – Heat Transfer Technology
Transcript of Heat Recovery - Siemens Energy AG
Heat RecoverySiemens Energy B.V. – Heat Transfer Technology
Solutions in Heat Transfer Technology
Siemens Energy - Heat Transfer Technology (hereafter Siemens Energy) is a world-leading Heat Recovery Steam Generator (HRSG) supplier, previously operating under the NEM brand name.
Our products recover energy from waste heat, increase energy efficiency, and thereby reduce CO₂ emissions. We have provided the boilers behind many gas turbines, varying in size from 10 MW up to the largest machines, and for all kinds of fuels and applications.
We offer a wide variety of boiler designs to meet your specific requirements, focusing on the lowest total installed and operational costs.
Since we can supply both horizontal and vertical units, we can optimize the boiler configuration to the smallest possible plot space available.
HRSG installed base, by GT size
> 200 MW
150 - 200 MW
100 - 150 MW
50 - 100 MW
30 - 50 MW
0 - 30 MW
500 100 150number of units
Various designs to fit your purpose
10 – 70 MW gas turbine output >70 MW gas turbine output
TypeGas flow
Utilization / benefits
Power
District and process heat, advanced cycles (ORC)
Fast Start & Cycling Base load and cogen
Suitable for customization
Fast Start & Cycling Fast Start & Cycling Oil firing, optimized plot space
Fast Start & Cycling, optimized plot space
Fast Start & Cycling Operations
Siemens Energy is a worldwide provider of two types of Fast Start HRSG technologies: Benson® and DrumPlus™.
Siemens Energy HRSG Fast Start solutions offer a quick response to power demand, while maintaining the lifetime of any HRSG. This ability is of special importance in so-called spot markets and locations
where the daily fluctuation in power is aggravated by power fluctuations of renewables.
Siemens Energy Fast Start solutions allow unrestricted gas turbine ramp-up which results in remarkable flexibility, reduced start-up costs, quick delivery to the grid and significantly lower CO and NO
x emissions
during start-up.
DrumPlus HRSG at El Segundo Power Plant, California, USA
Delivery concepts and site construction
We can supply our HRSGs in all kinds of prefabricated con-cepts, which enable you to optimize the total installed costs.
They can be delivered in the form of small parts due to transport limitations, or even complete pre-erected units (‘plug & play’ design) in order to minimize construction site costs/risks, whether for onshore or offshore applications.
Move your mouse over one of the reference highlights to see details, and use the buttons below to show references for each application.
Our full reference list is available up on request.
The information in this document contains general descriptions and performance features and projections which may not always reflect actual features and per-formance, or which may undergo modificaton in the course of product development. © 02.2021 Siemens Energy AG
Siemens Energy B.V. - Heat Transfer TechnologyStadhouderslaan 900 2382 BL ZoeterwoudeP.O. Box 222380 AA ZoeterwoudeThe Netherlands
Telephone +31 71 579 2444E-mail [email protected] Website
