Brazed Plate Heat Exchangers / Micro Plate Heat Exchangers ...
Heat exchangers and heat transfer final Mopco Course
-
Upload
mohammed-enab -
Category
Engineering
-
view
960 -
download
11
Transcript of Heat exchangers and heat transfer final Mopco Course
![Page 1: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/1.jpg)
1
Heat Exchangers and Heat Transfer
![Page 2: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/2.jpg)
2
Heat Exchangers and Heat Transfer
The course introduction could also include topics such as:
Introduction to heat transfer; Temperature and heat; Modes of heat transfer; Heat transfer between fluids; and The function of heat transfer equipment. The topics should include: Types of heat exchangers at Mopco Heat exchanger operation; and Heat exchanger problems.
![Page 3: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/3.jpg)
3
Introduction to heat transfer
![Page 4: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/4.jpg)
4
A process plant includes many different process and support systems to change raw materials into products by heating or cooling them
Among the many different devices that operate on the principles of heat transfer are boilers, coolers, and condensers.
These devices and others are commonly referred to as heat transfer devices, or heat exchangers.
تتضمن العمليات فى المصنع العديد منالظنظمة التى تؤدى الى تحويل المادة
الخام الى المنتج النهائى ومن بينها الظنظمة التى تعتمد على التبريد والتسخين
ومن بين تلك الظنظمة الغلياتوالمبردات والفران والمكثفات
وتندرج تلك المعدات تحت ما يسمىالمبادلت الحرارية
Introductionمقدمة
![Page 5: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/5.jpg)
5
مبادئ التنتقال الحراريPrinciples of heat
transfer It is very important to
study the basics of heat transfer to understand the operation of such devices
A temperature difference is necessary for a heat transfer process to take place .
Heat is transferred from the hot bodies to cold bodies
ومن المهم هنا ان ظندرس مبادئأظنتقال الحرارة لكى ظنفهم كيفية
عمل تلك الهجهزة والشرط الساسى لظنتقال الحرارة
هو وهجود فرق فى درهجات الحرارة
وتنتقل الحرارة من الجسم الساخنالى الجسم البارد الى أن يحدث
بينهما أتزان حرارى
![Page 6: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/6.jpg)
6
تأثير أضافة الحرارةEffects of Heat Addit ion
Adding heat may cause some or all of the following effects
1. Increase the temperature
2. Increase the pressure
3. Phase change
تصاحب بعض أو كلالنتائج التالية عملية أضافة
الحرارةأرتفاع درهجة الحرارة.1أرتفاع الضغط.2تحول المادة من صورة الى .3
أخرى (من سائل الى غاز أو من صلب الى سائل)
![Page 7: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/7.jpg)
7
Temperature and heat
![Page 8: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/8.jpg)
8
آلية أتنتقال الحرارةThe Process of Heat
Transfer Heat can be defined as
energy that is moving from one place to another or from one substance to another.
The movement is due to the temperature difference between substances.
Temperature differences are very important to the process of heat transfer.
تعرف الطاقة الحراريه بأظنها الطاقهالمنتقلة من ظنظام الى أخر أو من مادة الى
أخرى ويحدث أظنتقال الطاقه ظنتيجة وهجود
أختلف فى درهجات الحرارة بين المادتين ووهجود الختلف فى درهجة الحرارة
ضرورى لعملية أظنتقال الحرارة
![Page 9: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/9.jpg)
9
Effects of Pressure The boiling point of any fluid
is affected by both temperature and pressure.
The temperature at which boiling takes place at a given pressure is referred to as boiling temperature, and the pressure at which boiling takes place for a given temperature is referred to as vapor pressure.
The boiling temperature of water is different at different pressures.
يتوقف غليان لى مائع عل ضغط المائعودرهجة حرارته
وتختلف درهجةحرارة الغليان للماءبأختلف ضغطه
![Page 10: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/10.jpg)
10
Modes of heat transfer
![Page 11: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/11.jpg)
11
آليات أتنتقال الحرارةModes of Heat Transfer
Conduction Convection Radiation
التوصيلالحملالعشعاع
![Page 12: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/12.jpg)
12
التوصيل Conduction
Conduction is the process of heat transfer through the material due to the temperature difference
التوصيل الحرارى هى عمليةأظنتقال الحرارة عبر المادة عادة ما تكون صلبة ظنتيجة
أختلف درهجة الحرارة
![Page 13: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/13.jpg)
13
أتنتقال الحرارة بالتوصيلالعوامل التي تؤثر على Factors Affecting Heat Transfer By
Conduction
1. Thermal conductivity (Material)
Heat Transfer rate increases by increasing thermal conductivity
Thermal conductivity depends on the type of the material.
للمادةمعامل التوصيل الحرارى .1
كلما زاد مقدار المعامل كاظنت الحرارة المنتقلة عبر هذا الجدار عالية
ومعامل التوصيل الحرارى للمعادن تكون عالية وتختلف بأختلف المادة فالنحاس يكون أكبر من
اللوموظنيوم والحديد
![Page 14: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/14.jpg)
14
أتنتقال الحرارة بالتوصيلالعوامل التي تؤثر على Factors Affecting Heat Transfer By
Conduction
2- The temperature difference between the metal surfaces
3- The area of heat transfer
مقدار الفرق بين درجة حرارة - 2 فكلما زاد الفرق جهتي المعدن
كان مقدار الحرارة المنتقلة اكثر و العكس صحيح
مساحة الجدار المعدتني- 3فزيادة مساحة الجدار يزيد من
امكاظنية اظنتقال الحرارة بين المادتين الموهجودة على هجاظنبي
هذا الجدار المعدظني
![Page 15: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/15.jpg)
15
أتنتقال الحرارة بالتوصيل على مؤثرةالعوامل الFactors Affecting Heat Transfer By
Conduction
4- Material thicknessif the thickness increases
the rate of heat transfer decreases
حيث يقل سمك المعدن- - 4مقدار الحرارة المنتقلة كلما
زاد سمك الجدار الذي يفصل بين المادتين
وبالعكس كلما قل سمك هذا الجدار زاد اظنتقال الحرارة
![Page 16: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/16.jpg)
16
تأثير الرواسب على معدل أنتقال الحرارةEffect of scales of heat transfer
rate
The effect of scale or deposits on the heat transfer rate can be explained by understanding the conduction.
If the thickness of scale increases and has lower thermal conductivity, the rate of heat transfer decreases as explained in the following figure.
ومن الظواهر التى يمكن تفسيرهاعن طريق فهم أنتقال الحرارة
بالتوصيل هى تأثير الرواسب على عملية أنتقال الحرارة فكلما زاد سمك الرواسب قل معدل أنتقال
الحرارة وكلما قل معامل التوصيلية للمادة المترسبة قل
معدل أنتقال الحرارة كذلك كما هو موضح بالشكل التالى
![Page 17: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/17.jpg)
17
أنتقال الحرارة فى الغلاياتHeat Transfer in a Boiler
Most boiler furnaces have burners as a heat source. As indicated, burning fuel in a boiler produces radiant energy, which travels through the combustion area of the boiler.
As the radiant energy makes contact with the outer surfaces of the water tubes, the tubes absorb the radiant energy and transfer its heat by conduction to the water in the tubes.
Convection heat transfer is also occurring, because the hot gases produced by the burning fuel transfer heat to the water tubes, as well.
اغلب الغليات تمتلك مواقد كمصدرللحرارة وعملية أحتراق الوقود تنتج طاقة
أشعاعية تنتقل عن طريق االهب الى سطح مواسير الماء
وعند سقوط الطاقة الشعاعية الى سطحمواسير الماء فأنها تنتقل الى الماء عبر
سمك المواسير الى الماء عن طريق التوصيل
وكذلك تنتقل جزء من الطاقة عن طريقالحمل نتيجة لملمسة الغازات الساخنة
لجدار مواسير الماء
![Page 18: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/18.jpg)
18
أنتقال الحرارة فى الغلاياتHeat Transfer in a Boiler
![Page 19: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/19.jpg)
19
أنتقال الحرارة فى الغلاياتHeat Transfer in a Boiler
The heat transfer that takes place in a boiler furnace is a good example of the three modes of heat transfer:
Conduction, heat transfer through the tube walls to the water in the tubes.
Convection, heat transfer from the hot combustion gases to the water in the tubes.
Radiation, burning fuel transferring heat to the combustion gases and the tube walls.
ويعتبر أنتقال الحرارة خللالغلية مثال واضح لليات أنتقال
الحرارة : التوصيل خلل جدار المواسير
للماء الحمل من غازات الحتراق للماء
فى المواسير الشعاع من خلل اللهب الى جدار
المواسير
![Page 20: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/20.jpg)
20
Heat transfer between f luids
![Page 21: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/21.jpg)
21
أنتقال الحرارة خلل الجدار الصلبHeat Transfer through a Solid
Boundary During the heat transfer
process, heat transfers from the hot fluid to the cold fluid.
Because the composition of the wall does not change, the heat transfer rate across the wall is determined by the temperature difference between the fluids.
A greater temperature difference increases the rate of heat transfer, while a lesser temperature difference decreases the rate of heat transfer
تنتقل الحرارة من المائع الساخن الىالمائع البارد
كلما زاد فرق درجة الحرارة كلما زادمعدل أنتقال الحرارة
![Page 22: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/22.jpg)
22
العوامل المؤثرة على أنتقال الحرارة بين مائعيينFactors that Affect Heat Transfer
between Fluids
H. Thermal conductivity
Every substance has a definite thermal conductivity which affects the amount of heat transferred. Metals are good conductors while wood and carbon are very poor conductors.
معامل أنتقال الحرارة بالتوصيل المعادن تكون أفضل من المواد
الغير المعدنية من حيث معامل أنتقال الحرارة بالتوصيل
![Page 23: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/23.jpg)
23
العوامل المؤثرة على أنتقال الحرارة بين مائعيينFactors that Affect Heat Transfer
between Fluids
I . Velocity of the f luids in the tube
The velocity affects the fouling, with higher velocities reducing the possibility of scale or dirt deposits on the tubes. An increase in the velocity of the fluids increases the heat transfer rate
سرعة الموائع فى المواسير كلما زادت السرعة يزيد معدل
أنتقال الحرارة وكلما زادت السرعة يقل معدل
تكون ترسبات
![Page 24: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/24.jpg)
24
العوامل المؤثرة على أنتقال الحرارة بين مائعيينFactors that Affect Heat Transfer
between Fluids
K. Direction of f low of the l iquids exchanging
When using identical equipment with equal rates of flow, the one with counter-current flow and the other with parallel (co-current) flow, the final temperature will be higher with counter current flow.
أتجاه سرايا ن المائعين اللذا ن ايتبدل نالحرارة
عندما يتبادل مائعان الحرارة بمبادلينمتشابهين وبنفس معدل السريان فأن
المبادل الذى يكون أتجاه سريان المائعين متضادان يكون فرق درجة الحرارة أكبر
من المبادل الذى يكون أتجاه سريان المائعين متوازيان
![Page 25: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/25.jpg)
25
العوامل المؤثرة على أنتقال الحرارة بين مائعيينFactors that Affect Heat Transfer
between Fluids M. Fouling or Scale
Buildup Another factor that can affect
heat transfer is the buildup of solid impurities on the walls of heat exchanging devices. For example, when rust, scale, or other solid deposits build up on the walls of pipes and tubes, they form a layer of insulation on the surface of the wall.
This layer of insulation impedes the overall ability of the wall to transfer heat, and thus reduces the rate of heat transfer.
تكو ن الرواسب كلما زاد سمك الرواسب كلما قل
معدل أنتقال الحرارة نتيجة لزيادة المقاومة لنتقال الحرارة
![Page 26: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/26.jpg)
26
أستخدامات أجهزة أنتقال الحرارةThe function of heat transfer
equipment
![Page 27: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/27.jpg)
27
أستخدامات أجهزة أنتقال الحرارةThe function of heat transfer
equipment
The term "heat exchanger" is commonly used to describe different types of equipment used in heat transfer service.
Functions of heat transfer equipment are
المبادل الحرارى يستخدملكثر من جهاز يستخدم لكثر
من غرض وبعض أستخدامات هذه
الجهزة موضحة فيما يلى
![Page 28: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/28.jpg)
28
أستخدامات أجهزة أنتقال الحرارةThe function of heat transfer
equipment
Cooler Reduce the temperature of
a liquid or gas using water to remove heat.
Heater Increase the temperature
of a liquid or gas by adding heat using condensing steam, hot oil, etc.
Condenser Remove heat from a gas,
changing it to a liquid.
مبرد يقلل درجة حرارة سائل أو غاز
سخا نيزيد من درجة حرارة سائل أو غاز
مكثف
ينزع الحرارة من غاز فيتحول الى سائل
![Page 29: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/29.jpg)
29
أستخدامات أجهزة أنتقال الحرارةThe function of heat transfer
equipment
Vaporizer Add heat to a liquid,
changing it to a gas.Reboilers Provide heat as latent
heat to liquid. The heat may be supplied by either steam or a hot process stream.
مبخر يضيف حرارة الى سائل فيتحول
الى غازأعادة الغليا ن يمد السائل بالحرارة الكامنة
اللزمة لتحوله الى غاز
![Page 30: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/30.jpg)
30
أستخدامات أجهزة أنتقال الحرارةThe function of heat transfer
equipment
Chiller Cool a liquid or gas
using a refrigerant instead of water.
Exchanger Perform two functions.
They can heat a cold process stream by using a hot process fluid, or they can cool a hot process stream by using a cold process fluid.
مثلج يبرد السائل او الغاز عن طريق
فريون
مبادل يقوم بوظيفتين عن أضافة حرارة
لمائع ونزعها من الخر
![Page 31: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/31.jpg)
31
U-tube Heat ExchangerU-tube Heat Exchanger In U‑tube heat exchangers,
fluid enters one end of the tubes and flows to the other end.
However, instead of exiting, the tubes bend back in the shape of a U.
Fluid flows around the bend and back to the first end, then exits the heat exchanger.
This is called a double pass heat exchanger
فى المبادل الحرارى على شكل حرف يدخل المائع الى المواسير من جهة Uال
ثم يتجه الى الجهة الخرى ويرتد ليخرج من نفس الجهة التى دخل منها
ويسمى المبادل من هذا النوع ثنائىالمسار
![Page 32: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/32.jpg)
32
U-tube Heat ExchangerU-tube Heat Exchanger In this type of construction,
tube bundle as well as individual tubes are free to expand and the tube bundle is removable. A U-tube exchangers can be used for the following services:
1. Clean fluid on the tube side2. Extreme high pressure on
one side3. Temperature conditions
requiring thermal relief by expansion
فى هذا النوع من المبادل ت تكون حزمةالمواسير حرة لكى تتمدد
ويفضل أستخدام هذا النوع من المبادل تفى الحال ت التالية
- المائع النظيف داخل المواسير1- ضغط المائع عالى جد�ًا2- درجة حرارة المائع عالية مما يستلزم 3
تمدد للمواسير
![Page 33: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/33.jpg)
33
U-tube Heat ExchangerU-tube Heat Exchanger
1. tube bundle 2. shell 3. tube 4. baffle 5. vent nozzle 6. inlet tubeside 7. Tubesheet 8. drain nozzle9. shellside
![Page 34: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/34.jpg)
34
Shell and tube heat Shell and tube heat exchangerexchanger
The name describes the geometry a bundle of tubes mounted within a cylindrical shell.
The "tube-side" fluid flows inside the tubes and the "shell-side" fluid passes inside the shell but outside the tubes.
The two fluids exchange heat through the tube walls. Shell-and-tube exchangers are by far the most common type.
يعتبر هذا النوع من المبادل ت من أكثرالنواع أنتشار�ًا
يتكون هذا النوع من المبادل ت من حزمةمن المواسير توضع داخل وعاء
أسطوانى يمر أحد المائعين داخل المواسير بينما
يمر المائع الخر داخل الوعاء السطوانى
![Page 35: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/35.jpg)
35
Shell and tube Heat Exchanger
Heat exchangers are built so fluids will have one pass, two passes, or multiple passes through the exchanger, depending on the arrangement of the tubes.
They may also have a combination of flow paths.
The tubes in heat exchangers have either straight tube arrangements or U‑tube arrangements.
In straight tube heat exchangers, fluid enters one end of the tubes, flows straight through and exits the other end. This is called a single pass heat exchanger.
المبادل الحرارى يمكن أن يكون ذامواسير ذو مسار واحد أو ذو مسار ثنائى أو مسارا ت متعددة
وممكن أن تكون المواسير مستقيمة Uأو على شكل حرف ال
وفى حالة المواسير المستقيمةيدخل المائع المواسير من جهة
ويخرج من الجهة الخرى
![Page 36: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/36.jpg)
36
المكونات الساسيه للمبادل Main Components of Shell and
Tube Heat Exchangers
Tubesالنابيب .1Shellالغل ف .2Bafflesالحواجز .3 Ventفتحة التهويه .4Drainفتحة التصريف .5Shell inlet nozzleفتحة دخول الغل ف .6Shell outlet nozzleفتحة الخروج من الغل ف .7Tube inlet nozzleفتحة دخول المواسير .8 Tube outlet nozzle فتحة الخروج من المواسير .9
![Page 37: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/37.jpg)
37
Shell and tube heat Shell and tube heat exchangerexchanger
![Page 38: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/38.jpg)
38
Cross - Sectional View ofFloating Tube-sheet Exchanger
![Page 39: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/39.jpg)
39
Plate Heat ExchangerPlate Heat Exchanger A plate heat exchanger
is usually comprised of a stack of corrugated or embossed metal plates in mutual contact, each plate having four apertures serving as inlet and outlet ports, and seals designed so as to direct the fluids in alternate flow passages.
المبادل الحرارى ذو الشرائحيتكون من العديد من الشرائح
المعدنية المتعرجة وكل شريحة فتحا ت تستخدم 4يكون بها
كفتحا ت دخول وخروج وتوجيه المائعين ليسرى كل منهما فى جهة
مختلفة من الشريحة
![Page 40: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/40.jpg)
40
Plate Heat ExchangerPlate Heat Exchanger The flow passages are
formed by adjacent plates so that the two streams exchange heat while passing through alternate channels.
When assembled, the spacing between adjacent plates ranges from 1.3 to 6.4 mm.
ويتكون مسارا ت السريان منالشرائح المتاخمة لبعضها
وبعد تجميع المبادل تتراوحالمسافة البينية بين أى شريحتين
مم6.4 الى 1.3من
![Page 41: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/41.jpg)
41
Plate Heat ExchangerPlate Heat Exchanger
![Page 42: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/42.jpg)
42
Plate Heat ExchangerPlate Heat Exchanger Proper selection of
gasket material and operating conditions will eliminate the leakage risk.
والختيار المناسب لمادةمانع التسرب وظروف
التشغيل سوف يمنع حدوث تسرب
![Page 43: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/43.jpg)
43
Plate Heat ExchangerPlate Heat Exchanger
![Page 44: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/44.jpg)
44
Plate Heat ExchangerPlate Heat Exchanger High turbulence, absence of
stagnant areas, uniform fluid flow, and the smooth plate surface reduce fouling and the need for frequent cleaning.
In plate heat exchangers, flow-induced vibration, noise, and erosion- corrosion due to impingement attack are not present as in shell and tube heat exchangers.
زيادة الدواما ت وغياب المناطقالساكنة والسريان المنتظم والسطح الملس سيؤدى الى تقليل الرواسب
ل يعانى هذا النوع من المبادل تمن أى أهتزازا ت ناتجة عن
السربان أو الضوضاء أو الصداء المصاحب للنحت
![Page 45: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/45.jpg)
45
Plate Heat ExchangerPlate Heat Exchanger
![Page 46: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/46.jpg)
46
Kettle Type ReboilerKett le Type Reboiler The K shell is used for
partially vaporizing the shell fluid. It is used as a kettle reboiler in the process industry.
Usually, it consists of a horizontal bundle of heated U tubes or floating head placed in an oversized shell.
The tube bundle is free to move and it is removable. Its diameter is about 50-70% of the shell diameter.
يستخدم هذا النوع من المبادل تفى تبخير مائع الوعاء
وهو يتكون من حزمة المواسيرUعلى شكل حرف ال
وحزمة المواسير يكون حرة الحركة ويكون قطر الحزمة فى
% من قطر الوعاء70-50جدود
![Page 47: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/47.jpg)
47
Kettle Type ReboilerKett le Type Reboiler The large empty space above
the tube bundle acts as a vapor disengage space.
The liquid to be vaporized enters at the bottom, near the tube sheet, and covers the tube bundle; the vapor occupies the upper space in the shell, and the dry vapor exits from the top nozzle(s), while a weir helps to maintain the liquid level over the tube bundle.
The bottom nozzle in this space is used to drain the excess liquid.
ويستخدم الحيز الكبير فوق حزمةالمواسير كفاصل للبخار
يدخل السائل المراد تبخيره منأسفل ولدبد أن يغطى حزمة
المواسير ويخرج البخار الجاف من أعلى
وتستخدم الفتحة فى أسفل الوعاءللتخلص من السائل الزائد
![Page 48: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/48.jpg)
48
Kettle Type ReboilerKett le Type Reboiler
![Page 49: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/49.jpg)
49
Air-Cooled Heat Exchangers
Air-cooled exchangers have the process fluid inside the tubes and ambient air on the outside, either moving by natural convection or blown by a fan.
Because of the low heat-transfer coefficient for atmospheric air, fins are used on the outside of the pipes
يمر السائل فى المواسير للمبادلالحرارى المبرد دبالهواء دبينما يمر
الهواء الجوى متعامدا على المواسير وقد يكون مروره طبيعيا
أو مدفوعا دبمروحة وتستخدم زعانف على السطح
الخارجى للمواسير لزيادة معدل أنتقال الحرارة
![Page 50: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/50.jpg)
50
Air-Cooled Heat Exchangers
![Page 51: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/51.jpg)
51
Air-Cooled Heat Exchangers
Both induced and forced draft fans are used.
The latter are specified in most applications.
When recirculation of cooling air is a problem, induced draft fans are used to provide positive outflow of the air.
وتستخدم الراوح ذا ت النوعالجبرى أو المستحث فى المبادل ت
وتعتبر المروحة الجبرية أكثرأنتشارا
![Page 52: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/52.jpg)
52
Air-Cooled Heat Exchangers
![Page 53: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/53.jpg)
53
Air-Cooled Heat Exchangers
Air density affects the required air flow and, thus, the fan capacity, the head to be developed by the fans, and the power consumption.
وتؤثر كثافة الهواء على كميةالهواء المستخدمة فى تبريد
السائل وتقل الكثافة فى الصيف مما يؤدى الى زيادة
القدرة المستخدمة لدارة المروحة
![Page 54: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/54.jpg)
54
Air-Cooled Heat Exchangers
![Page 55: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/55.jpg)
55
المكثفاتCondensers
Condensers used for removing heat from steam and convert it to water
Condensers are classified into water cooling and air cooling condensers
تستخدم المكثفا ت عموم ًا فى تحويل المنتجا ت من الحاله الغازية الى الحاله السائله حيث ان معظم المنتجا ت البترولية التى تخرج من اعلى الدبراج تكون فى حالة ادبخرة"Vapor" او غازا ت "Gases"
يتم تحويلها الى الحالة السائلة دبواسطة المكثفا ت. وهذه المكثفا ت إما ان تكون مائية او هوائيه
![Page 56: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/56.jpg)
56
المكثفات Condensers
![Page 57: Heat exchangers and heat transfer final Mopco Course](https://reader034.fdocuments.net/reader034/viewer/2022042514/55a5a6511a28ab4f398b456e/html5/thumbnails/57.jpg)
57
ذو تبريد بالماء المكثفاتWater Cooled Condenser