HE910/UE910/UL865/UE866 AT Commands Reference Guide · A/a/. . • + • • 3+ • • @”,...

Telit 3G Modules AT Commands Reference Guide 80378ST10091A Rev. 11– 2016-10-14

HE910/UE910/UL865/UE866 AT Commands Reference Guide 80378ST10091A Rev. 11– 2016-10-14

Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 2 of 593 Mod. 0808 2011-07 Rev.2

APPLICABILITY TABLE 1

PRODUCT

HE910

HE910-D

HE910-GL

HE910-EUR

HE910-EUD

HE910-EUG

HE910-NAR

HE910-NAD

HE910-NAG

UE910-EUR

UE910-EUD

UE910-NAR

UE910-NAD

UL865-EUR

UL865-EUD

UL865-NAR

UL865-NAD

UE866-N3G

UE910-N3G

UE866-EU

UL865-BR

Note: the features described by the present document are provided by the products equipped with the software versions equal or greater than the version shown in the table.

1 HE910 is the “type name” of the products marketed as HE910-G and HE910-DG

SW Version 12.00.xx8



SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Notice While reasonable efforts have been made to assure the accuracy of this document, Telit assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. The information in this document has been carefully checked and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies or omissions. Telit reserves the right to make changes to any products described herein and reserves the right to revise this document and to make changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Telit does not assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey license under its patent rights or the rights of others. It is possible that this publication may contain references to, or information about Telit products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that Telit intends to announce such Telit products, programming, or services in your country.

Copyrights This instruction manual and the Telit products described in this instruction manual may be, include or describe copyrighted Telit material, such as computer programs stored in semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted material of Telit and its licensors contained herein or in the Telit products described in this instruction manual may not be copied, reproduced, distributed, merged or modified in any manner without the express written permission of Telit. Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Telit, as arises by operation of law in the sale of a product.

Computer Software Copyrights The Telit and 3rd Party supplied Software (SW) products described in this instruction manual may include copyrighted Telit and other 3rd Party supplied computer programs stored in semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit and other 3rd Party supplied SW certain exclusive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Telit or other 3rd Party supplied SW computer programs contained in the Telit products described in this instruction manual may not be copied (reverse engineered) or reproduced in any manner without the express written permission of Telit or the 3rd Party SW supplier. Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Telit or other 3rd Party supplied SW, except for the normal non-exclusive, royalty free license to use that arises by operation of law in the sale of a product.



Usage and Disclosure Restrictions License Agreements The software described in this document is the property of Telit and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement. Copyrighted Materials Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No part of the software or documentation may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without prior written permission of Telit High Risk Materials Components, units, or third-party products used in the product described herein are NOT fault-tolerant and are NOT designed, manufactured, or intended for use as on-line control equipment in the following hazardous environments requiring fail-safe controls: the operation of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life Support, or Weapons Systems (High Risk Activities"). Telit and its supplier(s) specifically disclaim any expressed or implied warranty of fitness for such High Risk Activities.

Trademarks TELIT and the Stylized T Logo are registered in Trademark Office. All other product or service names are the property of their respective owners. Copyright © Telit Communications S.p.A.



Contents 1. INTRODUCTION ......................................................................................................................................................... 18

1.1. SCOPE ..................................................................................................................................................................... 18 1.2. AUDIENCE ............................................................................................................................................................... 18 1.3. CONTACT INFORMATION, SUPPORT ......................................................................................................................... 18 1.4. DOCUMENT ORGANIZATION ................................................................................................................................... 19 1.5. TEXT CONVENTIONS ............................................................................................................................................... 19 1.6. RELATED DOCUMENTS ........................................................................................................................................... 19

2. OVERVIEW .................................................................................................................................................................. 20 2.1. ABOUT THE DOCUMENT .......................................................................................................................................... 20

3. AT COMMANDS .......................................................................................................................................................... 21 3.1. DEFINITIONS ........................................................................................................................................................... 21 3.2. AT COMMAND SYNTAX .......................................................................................................................................... 22

3.2.1. String Type Parameters ................................................................................................................................. 23 3.2.2. Command Lines ............................................................................................................................................. 23

3.2.2.1. ME Error Result Code - +CME ERROR: ......................................................................................................... 24 3.2.2.2. Message Service Failure Result Code - +CMS ERROR: .................................................................................. 27

3.2.3. Information Responses And Result Codes ..................................................................................................... 28 3.2.4. Command Response Time-Out ...................................................................................................................... 29 3.2.5. Command Issuing Timing .............................................................................................................................. 29

3.3. STORAGE ................................................................................................................................................................ 29 3.3.1. Factory Profile And User Profiles ................................................................................................................. 29

4. AT COMMANDS AVAILABILITY TABLE ............................................................................................................. 33

5. AT COMMANDS REFERENCES .............................................................................................................................. 36 5.1. COMMAND LINE GENERAL FORMAT ....................................................................................................................... 36

5.1.1. Command Line Prefixes ................................................................................................................................ 36 5.1.1.1.1. Starting A Command Line - AT ............................................................................................................................ 36 5.1.1.1.2. Last Command Automatic Repetition - A/ ............................................................................................................ 36 5.1.1.1.3. Repeat Last Command - AT#/ ............................................................................................................................... 36

5.1.2. General Configuration Commands................................................................................................................ 37 5.1.2.1.1. Select Interface Style - #SELINT .......................................................................................................................... 37

5.1.3. Hayes Compliant AT Commands ................................................................................................................... 38 5.1.3.1. Generic Modem Control ............................................................................................................................................. 38

5.1.3.1.1. Set To Factory-Defined Configuration - &F.......................................................................................................... 38 5.1.3.1.2. Soft Reset - Z ......................................................................................................................................................... 38 5.1.3.1.3. Select Active Service Class - +FCLASS ............................................................................................................... 39 5.1.3.1.4. Default Reset Basic Profile Designation - &Y ...................................................................................................... 39 5.1.3.1.5. Default Reset Full Profile Designation - &P ......................................................................................................... 39 5.1.3.1.6. Store Current Configuration - &W ........................................................................................................................ 40 5.1.3.1.7. Store Telephone Number - &Z .............................................................................................................................. 40 5.1.3.1.8. Display Stored Numbers - &N.............................................................................................................................. 40 5.1.3.1.9. Manufacturer Identification - +GMI ...................................................................................................................... 41 5.1.3.1.10. Model Identification - +GMM ............................................................................................................................. 41 5.1.3.1.11. Revision Identification - +GMR .......................................................................................................................... 41 5.1.3.1.12. Capabilities List - +GCAP ................................................................................................................................... 41 5.1.3.1.13. Serial Number - +GSN ........................................................................................................................................ 41 5.1.3.1.14. Display Configuration And Profile - &V ............................................................................................................ 42 5.1.3.1.15. Display Configuration And Profile - &V0 .......................................................................................................... 42 5.1.3.1.16. S Registers Display - &V1 .................................................................................................................................. 42



5.1.3.1.17. Extended S Registers Display - &V3................................................................................................................... 43 5.1.3.1.18. Display Last Connection Statistics - &V2 ........................................................................................................... 43 5.1.3.1.19. Single Line Connect Message - \V ...................................................................................................................... 43 5.1.3.1.20. Country Of Installation - +GCI ............................................................................................................................ 44 5.1.3.1.21. Line Signal Level - %L........................................................................................................................................ 44 5.1.3.1.22. Line Quality - %Q ............................................................................................................................................... 44 5.1.3.1.23. Speaker Loudness - L .......................................................................................................................................... 44 5.1.3.1.24. Speaker Mode - M ............................................................................................................................................... 44

5.1.3.2. DTE - Modem Interface Control ................................................................................................................................. 45 5.1.3.2.1. Command Echo - E ............................................................................................................................................... 45 5.1.3.2.2. Quiet Result Codes - Q .......................................................................................................................................... 45 5.1.3.2.3. Response Format - V ............................................................................................................................................. 46 5.1.3.2.4. Extended Result Codes - X .................................................................................................................................... 47 5.1.3.2.5. Identification Information - I ................................................................................................................................. 47 5.1.3.2.6. Data Carrier Detect (DCD) Control - &C .............................................................................................................. 48 5.1.3.2.7. Data Terminal Ready (DTR) Control - &D ........................................................................................................... 48 5.1.3.2.8. Standard Flow Control - \Q ................................................................................................................................... 49 5.1.3.2.9. Flow Control - &K ................................................................................................................................................ 49 5.1.3.2.10. Data Set Ready (DSR) Control - &S ................................................................................................................... 49 5.1.3.2.11. Ring (RI) Control - \R ......................................................................................................................................... 50 5.1.3.2.12. Fixed DTE Interface Rate - +IPR ........................................................................................................................ 50 5.1.3.2.13. DTE-Modem Local Flow Control - +IFC ............................................................................................................ 52 5.1.3.2.14. DTE-Modem Character Framing - +ICF ............................................................................................................. 52

5.1.3.3. Call Control ................................................................................................................................................................ 54 5.1.3.3.1. Dial - D .................................................................................................................................................................. 54 5.1.3.3.2. Tone Dial - T ......................................................................................................................................................... 56 5.1.3.3.3. Pulse Dial - P ......................................................................................................................................................... 56 5.1.3.3.4. Answer - A ............................................................................................................................................................ 56 5.1.3.3.5. Disconnect - H ....................................................................................................................................................... 56 5.1.3.3.6. Return To On Line Mode - O ................................................................................................................................ 57

5.1.3.4. Modulation Control .................................................................................................................................................... 57 5.1.3.4.1. Line Quality And Auto Retrain - %E .................................................................................................................... 57

5.1.3.5. Compression Control .................................................................................................................................................. 57 5.1.3.5.1. Data Compression - +DS ....................................................................................................................................... 57 5.1.3.5.2. Data Compression Reporting - +DR ...................................................................................................................... 58

5.1.3.6. S Parameters ............................................................................................................................................................... 59 5.1.3.6.1. Number Of Rings To Auto Answer - S0 ............................................................................................................... 59 5.1.3.6.2. Ring Counter - S1 .................................................................................................................................................. 59 5.1.3.6.3. Escape Character - S2 ........................................................................................................................................... 60 5.1.3.6.4. Command Line Termination Character - S3 .......................................................................................................... 60 5.1.3.6.5. Response Formatting Character - S4 ..................................................................................................................... 61 5.1.3.6.6. Command Line Editing Character - S5 .................................................................................................................. 62 5.1.3.6.7. Connection Completion Time-Out - S7 ................................................................................................................. 62 5.1.3.6.8. – Carrier Off With Firm Time - S10 ...................................................................................................................... 62 5.1.3.6.9. – Escaper Prompt Delay - S12 ............................................................................................................................... 62 5.1.3.6.10. Delay To DTR Off - S25 ..................................................................................................................................... 64

5.1.4. 3GPP TS 27.007 AT Commands .................................................................................................................... 65 5.1.4.1. General ....................................................................................................................................................................... 65

5.1.4.1.1. Request Manufacturer Identification - +CGMI ..................................................................................................... 65 5.1.4.1.2. Request Model Identification - +CGMM .............................................................................................................. 65 5.1.4.1.3. Request Revision Identification - +CGMR ............................................................................................................ 65 5.1.4.1.4. Request Product Serial Number Identification - +CGSN ...................................................................................... 65 5.1.4.1.5. Select TE Character Set - +CSCS .......................................................................................................................... 66 5.1.4.1.6. International Mobile Subscriber Identity (IMSI) - +CIMI ..................................................................................... 66 5.1.4.1.7. Multiplexing Mode - +CMUX ............................................................................................................................... 67 5.1.4.1.8. Read ICCID - +CCID ............................................................................................................................................ 67

5.1.4.2. Call Control ................................................................................................................................................................ 68 5.1.4.2.1. Hang Up Call - +CHUP ......................................................................................................................................... 68



5.1.4.2.2. Select Bearer Service Type - +CBST .................................................................................................................... 68 5.1.4.2.3. Radio Link Protocol - +CRLP ............................................................................................................................... 70 5.1.4.2.4. Service Reporting Control - +CR .......................................................................................................................... 70 5.1.4.2.5. Extended Error Report - +CEER ........................................................................................................................... 71 5.1.4.2.6. Cellular Result Codes - +CRC ............................................................................................................................... 71 5.1.4.2.7. Voice Hung Up Control - +CVHU ........................................................................................................................ 72 5.1.4.2.8. Select type of address - +CSTA ............................................................................................................................. 72

5.1.4.3. Network Service Handling .......................................................................................................................................... 73 5.1.4.3.1. Subscriber Number - +CNUM ............................................................................................................................... 73 5.1.4.3.2. Read Operator Names - +COPN ............................................................................................................................ 73 5.1.4.3.3. Network Registration Report - +CREG ................................................................................................................. 74 5.1.4.3.4. Operator Selection - +COPS .................................................................................................................................. 75 5.1.4.3.5. Select Wireless Network - +WS46 ........................................................................................................................ 77 5.1.4.3.6. Facility Lock/Unlock - +CLCK ............................................................................................................................. 77 5.1.4.3.7. Change Facility Password - +CPWD ..................................................................................................................... 79 5.1.4.3.8. Calling Line Identification Presentation - +CLIP .................................................................................................. 79 5.1.4.3.9. Calling Line Identification Restriction - +CLIR .................................................................................................... 81 5.1.4.3.10. Connected line identification presentation - +COLP ........................................................................................... 82 5.1.4.3.11. Connected line identification restriction status - +COLR .................................................................................... 83 5.1.4.3.12. Call Forwarding Number And Conditions - +CCFC ........................................................................................... 84 5.1.4.3.13. Call Waiting - +CCWA ....................................................................................................................................... 85 5.1.4.3.14. Call Holding Services - +CHLD .......................................................................................................................... 87 5.1.4.3.15. Call deflection - +CTFR ...................................................................................................................................... 88 5.1.4.3.16. Unstructured Supplementary Service Data - +CUSD .......................................................................................... 88 5.1.4.3.17. Advice Of Charge - +CAOC ............................................................................................................................... 89 5.1.4.3.18. List Current Calls - +CLCC ................................................................................................................................. 90 5.1.4.3.19. SS Notification - +CSSN ..................................................................................................................................... 91 5.1.4.3.20. Closed User Group - +CCUG ............................................................................................................................. 92 5.1.4.3.21. Preferred Operator List - +CPOL ........................................................................................................................ 92 5.1.4.3.22. Selection of preferred PLMN list - +CPLS .......................................................................................................... 93

5.1.4.4. Mobile Equipment Control ......................................................................................................................................... 94 5.1.4.4.1. Phone Activity Status - +CPAS ............................................................................................................................. 94 5.1.4.4.2. Set Phone functionality - +CFUN .......................................................................................................................... 95 5.1.4.4.3. Enter PIN - +CPIN ................................................................................................................................................ 96 5.1.4.4.4. Remaining PIN retries - +CPINR .......................................................................................................................... 97 5.1.4.4.5. Signal Quality - +CSQ ........................................................................................................................................... 99 5.1.4.4.6. Indicator Control - +CIND .................................................................................................................................. 100 5.1.4.4.7. Mobile Equipment Event Reporting - +CMER ................................................................................................... 102 5.1.4.4.8. Select Phonebook Memory Storage - +CPBS...................................................................................................... 103 5.1.4.4.9. Read Phonebook Entries - +CPBR ...................................................................................................................... 104 5.1.4.4.10. Find Phonebook Entries - +CPBF ..................................................................................................................... 106 5.1.4.4.11. Write Phonebook Entry - +CPBW ..................................................................................................................... 108 5.1.4.4.12. Clock Management - +CCLK ............................................................................................................................ 110 5.1.4.4.13. Alarm Management - +CALA ........................................................................................................................... 111 5.1.4.4.14. Delete Alarm - +CALD ..................................................................................................................................... 112 5.1.4.4.15. Postpone alarm - +CAPD .................................................................................................................................. 113 5.1.4.4.16. Setting date format - +CSDF ............................................................................................................................. 113 5.1.4.4.17. Setting time format - +CSTF ............................................................................................................................. 114 5.1.4.4.18. Time Zone reporting - +CTZR .......................................................................................................................... 115 5.1.4.4.19. Automatic Time Zone update - +CTZU ............................................................................................................ 115 5.1.4.4.20. Restricted SIM Access - +CRSM ...................................................................................................................... 116 5.1.4.4.21. Generic SIM access - +CSIM ............................................................................................................................ 116 5.1.4.4.22. Alert Sound Mode - +CALM ............................................................................................................................ 121 5.1.4.4.23. Ringer Sound Level - +CRSL ............................................................................................................................ 121 5.1.4.4.24. Loudspeaker Volume Level - +CLVL ............................................................................................................... 122 5.1.4.4.25. Microphone Mute Control - +CMUT ................................................................................................................ 122 5.1.4.4.26. Silence command - +CSIL................................................................................................................................. 123 5.1.4.4.27. Accumulated Call Meter - +CACM ................................................................................................................... 123



5.1.4.4.28. Accumulated Call Meter Maximum - +CAMM ................................................................................................ 124 5.1.4.4.29. Price per Unit and Currency Table - +CPUC .................................................................................................... 124 5.1.4.4.30. Call meter maximum event - +CCWE ............................................................................................................... 125 5.1.4.4.31. Set voice mail number - +CSVM ...................................................................................................................... 125 5.1.4.4.32. Available AT Commands - +CLAC .................................................................................................................. 126

Mobile Equipment Errors ............................................................................................................................................................. 127 5.1.4.4.33. Report Mobile Equipment Error - +CMEE ........................................................................................................ 127 5.1.4.4.34. Open Logical Channel - +CCHO ....................................................................................................................... 127 5.1.4.4.35. Close Logical Channel - +CCHC ...................................................................................................................... 128 5.1.4.4.36. Generic UICC Logical Channel Access - +CGLA ............................................................................................ 129

5.1.4.5. Voice Control ........................................................................................................................................................... 131 5.1.4.5.1. DTMF Tones Transmission - +VTS .................................................................................................................... 131 5.1.4.5.2. Tone Duration - +VTD ........................................................................................................................................ 132

5.1.4.6. Commands For GPRS ............................................................................................................................................... 133 5.1.4.6.1. GPRS Mobile Station Class - +CGCLASS ......................................................................................................... 133 5.1.4.6.2. GPRS Attach Or Detach - +CGATT ................................................................................................................... 133 5.1.4.6.3. GPRS Event Reporting - +CGEREP ................................................................................................................... 134 5.1.4.6.4. GPRS Network Registration Status - +CGREG .................................................................................................. 135 5.1.4.6.5. Define PDP Context - +CGDCONT .................................................................................................................... 136 5.1.4.6.6. Quality Of Service Profile - +CGQMIN .............................................................................................................. 138 5.1.4.6.7. Quality Of Service Profile - +CGQREQ ............................................................................................................. 139 5.1.4.6.8. 3G Quality Of Service Profile (Requested) - +CGEQREQ ................................................................................. 141 5.1.4.6.9. 3G Quality Of Service Profile (Minimum Acceptable) - +CGEQMIN ............................................................... 144 5.1.4.6.10. PDP Context activate or deactivate - +CGACT ................................................................................................. 147 5.1.4.6.11. 3G Quality Of Service Profile (Negotiated) - +CGEQNEG .............................................................................. 148 5.1.4.6.12. PDP Context - +CGACT ................................................................................................................................... 149 5.1.4.6.13. Show PDP Address - +CGPADDR ................................................................................................................... 150 5.1.4.6.14. Modify PDP context - +CGCMOD ................................................................................................................... 151 5.1.4.6.15. Commands for Battery Charger ......................................................................................................................... 152

5.1.4.6.15.1. Battery Charge - +CBC .............................................................................................................................. 152 5.1.5. 3GPP TS 27.005 AT Commands for SMS and CBS ..................................................................................... 153

5.1.5.1. General Configuration .............................................................................................................................................. 153 5.1.5.1.1. Select Message Service - +CSMS ....................................................................................................................... 153 5.1.5.1.2. Preferred Message Storage - +CPMS .................................................................................................................. 154 5.1.5.1.3. Message Format - +CMGF .................................................................................................................................. 155

5.1.5.2. Message Configuration ............................................................................................................................................. 155 5.1.5.2.1. Service Center Address - +CSCA ........................................................................................................................ 155 5.1.5.2.2. Set Text Mode Parameters - +CSMP ................................................................................................................... 157 5.1.5.2.3. Show Text Mode Parameters - +CSDH ............................................................................................................... 159 5.1.5.2.4. Select Cell Broadcast - +CSCB ........................................................................................................................... 160 5.1.5.2.5. Save Settings - +CSAS ........................................................................................................................................ 161 5.1.5.2.6. Restore Settings - +CRES .................................................................................................................................... 161 5.1.5.2.7. More message to send - +CMMS ........................................................................................................................ 162

5.1.5.3. Message Receiving And Reading ............................................................................................................................. 163 5.1.5.3.1. New Message Indications - +CNMI .................................................................................................................... 163 5.1.5.3.2. New message acknowledgement - +CNMA ........................................................................................................ 168 5.1.5.3.3. List Messages - +CMGL ..................................................................................................................................... 170 5.1.5.3.4. Read Message - +CMGR ..................................................................................................................................... 172

5.1.5.4. Message Sending And Writing ................................................................................................................................. 175 5.1.5.4.1. Send Message - +CMGS ..................................................................................................................................... 175 5.1.5.4.2. Send Message From Storage - +CMSS ............................................................................................................... 177 5.1.5.4.3. Write Message To Memory - +CMGW ............................................................................................................... 178 5.1.5.4.4. Delete Message - +CMGD .................................................................................................................................. 180 5.1.5.4.5. Select service for MO SMS messages - +CGSMS .............................................................................................. 181

5.1.6. Custom AT Commands ................................................................................................................................ 182 5.1.6.1. General Configuration AT Commands ..................................................................................................................... 182

5.1.6.1.1. Hang Up Call - #CHUP ....................................................................................................................................... 182 5.1.6.1.2. USB configuration - #USBCFG .......................................................................................................................... 182



5.1.6.1.3. Connect physical ports to Service Access Points - #PORTCFG .......................................................................... 183 5.1.6.1.4. Data Link - #DLINK ........................................................................................................................................... 185 5.1.6.1.5. Network Selection Menu Availability - +PACSP ................................................................................................ 186 5.1.6.1.6. Manufacturer Identification - #CGMI ................................................................................................................. 186 5.1.6.1.7. Model Identification - #CGMM .......................................................................................................................... 186 5.1.6.1.8. Revision Identification - #CGMR ........................................................................................................................ 186 5.1.6.1.9. Product Serial Number Identification - #CGSN .................................................................................................. 187 5.1.6.1.10. Request International Mobile station Equipment Identity and Software Version - +IMEISV ........................... 187 5.1.6.1.11. International Mobile Subscriber Identity (IMSI) - #CIMI ................................................................................. 188 5.1.6.1.12. Read ICCID (Integrated Circuit Card Identification) - #CCID .......................................................................... 188 5.1.6.1.13. Service Provider Name - #SPN ......................................................................................................................... 188 5.1.6.1.14. Extended Numeric Error report - #CEER .......................................................................................................... 188 5.1.6.1.15. Extended error report for Network Reject cause - #CEERNET ......................................................................... 191 5.1.6.1.16. Display PIN Counter - #PCT ............................................................................................................................. 192 5.1.6.1.17. Manage PIN2- #CPIN2...................................................................................................................................... 192 5.1.6.1.18. Software Shut Down - #SHDN .......................................................................................................................... 194 5.1.6.1.19. Fast shutdown configuration - #FASTSHDN .................................................................................................... 194 5.1.6.1.20. Extended Reset - #Z .......................................................................................................................................... 195 5.1.6.1.21. Periodic Reset - #ENHRST ............................................................................................................................... 195 5.1.6.1.22. Wake From Alarm Mode - #WAKE .................................................................................................................. 196 5.1.6.1.23. Temperature Monitor - #TEMPMON ................................................................................................................ 197 5.1.6.1.24. Temperature monitor configuration - #TEMPCFG ........................................................................................... 199 5.1.6.1.25. General Purpose Input/Output Pin Control - #GPIO ......................................................................................... 200 5.1.6.1.26. SIMIN pin configuration - #SIMINCFG ........................................................................................................... 203 5.1.6.1.27. Alarm Pin - #ALARMPIN ................................................................................................................................. 204 5.1.6.1.28. STAT_LED GPIO Setting - #SLED .................................................................................................................. 205 5.1.6.1.29. Save STAT_LED GPIO Setting - #SLEDSAV ................................................................................................. 206 5.1.6.1.30. SMS Ring Indicator - #E2SMSRI ..................................................................................................................... 206 5.1.6.1.31. Event Ring Indicator - #E2RI ............................................................................................................................ 206 5.1.6.1.32. Read Analog/Digital Converter input - #ADC................................................................................................... 208 5.1.6.1.33. V24 Output Pins Configuration - #V24CFG ..................................................................................................... 208 5.1.6.1.34. V24 Output Pins Control - #V24 ....................................................................................................................... 209 5.1.6.1.35. Battery and charger status - #CBC..................................................................................................................... 210 5.1.6.1.36. GPRS Auto-Attach Property - #AUTOATT ...................................................................................................... 210 5.1.6.1.37. Multislot Class Control - #MSCLASS .............................................................................................................. 211 5.1.6.1.38. Cell Monitor - #MONI ...................................................................................................................................... 212 5.1.6.1.39. Compressed Cell Monitor - #MONIZIP ............................................................................................................ 216 5.1.6.1.40. Serving Cell Information - #SERVINFO........................................................................................................... 219 5.1.6.1.41. Lock to single BCCH_ARFCN - #BCCHLOCK ............................................................................................... 220 5.1.6.1.42. Read current network status - #RFSTS .............................................................................................................. 222 5.1.6.1.43. Query SIM Status - #QSS .................................................................................................................................. 226 5.1.6.1.44. Delete all phonebook entries - #CPBD .............................................................................................................. 226 5.1.6.1.45. ATD Dialing Mode - #DIALMODE ................................................................................................................. 227 5.1.6.1.46. Automatic call - #ACAL ................................................................................................................................... 228 5.1.6.1.47. Extended automatic call - #ACALEXT ............................................................................................................. 229 5.1.6.1.48. Extended Call Monitoring - #ECAM ................................................................................................................. 230 5.1.6.1.49. SMS Overflow - #SMOV .................................................................................................................................. 231 5.1.6.1.50. Mailbox Numbers - #MBN ................................................................................................................................ 231 5.1.6.1.51. Message Waiting Indication - #MWI ................................................................................................................ 232 5.1.6.1.52. Network Emergency Number Update - #NWEN ............................................................................................... 233 5.1.6.1.53. Update PLMN List - #PLMNUPDATE............................................................................................................. 234 5.1.6.1.54. PLMN List Selection - #PLMNMODE ............................................................................................................. 235 5.1.6.1.55. Periodical FPLMN cleaning - #FPLMN ............................................................................................................ 235 5.1.6.1.56. Show Call Timers - #SCT .................................................................................................................................. 236 5.1.6.1.57. #Show Call Information - #SCI ......................................................................................................................... 236 5.1.6.1.58. Packet Service Network Type - #PSNT ............................................................................................................. 237 5.1.6.1.59. SIM Presence status - #SIMPR .......................................................................................................................... 239 5.1.6.1.60. Call Forwarding Flags - #CFF ........................................................................................................................... 239



5.1.6.1.61. GSM and UMTS Audio Codec - #CODEC ....................................................................................................... 240 5.1.6.1.62. Network Timezone - #NITZ .............................................................................................................................. 241 5.1.6.1.63. Clock management - #CCLK ............................................................................................................................ 242 5.1.6.1.64. Clock Mode - #CCLKMODE ............................................................................................................................ 243 5.1.6.1.65. Calculate and update date and time - #NTP ....................................................................................................... 245 5.1.6.1.66. Enhanced Network Selection - #ENS ................................................................................................................ 245 5.1.6.1.67. Select Band - #BND .......................................................................................................................................... 246 5.1.6.1.68. Automatic Band Selection - #AUTOBND ......................................................................................................... 247 5.1.6.1.69. PPP-GPRS Connection Authentication Type - #GAUTH ................................................................................. 249 5.1.6.1.70. PPP-GPRS Parameters Configuration - # GPPPCFG ........................................................................................ 249 5.1.6.1.71. Skip Escape Sequence - #SKIPESC .................................................................................................................. 250 5.1.6.1.72. Subscriber number - #SNUM ............................................................................................................................ 251 5.1.6.1.73. SIM detection mode - #SIMDET ....................................................................................................................... 251 5.1.6.1.74. GSM Context Definition - #GSMCONT ........................................................................................................... 252 5.1.6.1.75. Show Address - #CGPADDR ............................................................................................................................ 253 5.1.6.1.76. Call Establishment Lock - #CESTHLCK .......................................................................................................... 254 5.1.6.1.77. Write to I2C - #I2CWR ..................................................................................................................................... 254 5.1.6.1.78. Read to I2C - #I2CRD ....................................................................................................................................... 255 5.1.6.1.79. Power Saving Mode Ring - #PSMRI ................................................................................................................. 257 5.1.6.1.80. Control Command Flow - #CFLO ..................................................................................................................... 258 5.1.6.1.81. Report concatenated SMS indexes - #CMGLCONCINDEX ............................................................................. 258 5.1.6.1.82. Codec Information - #CODECINFO ................................................................................................................. 259 5.1.6.1.83. Select language - #LANG .................................................................................................................................. 261 5.1.6.1.84. Enable RX Diversity and set DARP - #RXDIV ................................................................................................ 262 5.1.6.1.85. Swap 3G-RX from main to diversity - #RXTOGGLE ...................................................................................... 262 5.1.6.1.86. Set Encryption algorithm - #ENCALG .............................................................................................................. 263 5.1.6.1.87. Escape Sequence Guard Time - #E2ESC .......................................................................................................... 266 5.1.6.1.88. No Carrier Indication Handling - #NCIH .......................................................................................................... 267 5.1.6.1.89. Digital/Analog Converter Control - #DAC ........................................................................................................ 267 5.1.6.1.90. GSM Antenna Detection - #GSMAD ................................................................................................................ 268 5.1.6.1.91. Change and insert file system password - #FILEPWD ...................................................................................... 270 5.1.6.1.92. User Determined User Busy - #UDUB .............................................................................................................. 271 5.1.6.1.93. Enable Test Mode command in not signaling mode - #TESTMODE ................................................................ 271 5.1.6.1.94. WCDMA domain selection - #WCDMADOM ................................................................................................. 274 5.1.6.1.95. Secure configuration - #SECCFG ...................................................................................................................... 275 5.1.6.1.96. System turn-off - #SYSHALT ........................................................................................................................... 275 5.1.6.1.97. Fast system turn-off - #FASTSYSHALT .......................................................................................................... 276 5.1.6.1.98. Ciphering Indication - #CIPHIND ..................................................................................................................... 277 5.1.6.1.99. CMUX Mode Set - #CMUXMODE .................................................................................................................. 278 5.1.6.1.100. Fast Dormancy - #FDOR ................................................................................................................................. 280 5.1.6.1.101. Enable Unsolicited Indication of Registration Messages - #REGIND ............................................................. 282 5.1.6.1.102. Enhanced Multi Level Procedure and Pre-emption - #XEMLPP .................................................................... 284 5.1.6.1.103. I2C Write and Read Data in Combined Format - #I2CCF ............................................................................... 284 5.1.6.1.104. Initializes modem serial port with SPI protocol - #SPIOPEN ......................................................................... 285 5.1.6.1.105. De-initializes modem serial port for SPI protocol - #SPICLOSE .................................................................... 285 5.1.6.1.106. Writes a buffer to the SPI and prints the read data - #SPIRW ......................................................................... 286

5.1.6.2. Easy Scan® Extension AT Commands ..................................................................................................................... 286 5.1.6.2.1. Network Survey - #CSURV ................................................................................................................................ 287 5.1.6.2.2. Network Survey (Numeric Format) - #CSURVC ................................................................................................ 292 5.1.6.2.3. Network Survey Format - #CSURVF .................................................................................................................. 297 5.1.6.2.4. Removing On Easy Scan® Commands - #CSURVNLF .................................................................. 297 5.1.6.2.5. Extended network survey - #CSURVEXT .......................................................................................................... 298

5.1.6.3. AT Run Commands .................................................................................................................................................. 299 5.1.6.3.1. Enable SMS Run AT Service - #SMSATRUN.................................................................................................... 299 5.1.6.3.2. Set SMS Run AT Service parameters - #SMSATRUNCFG ............................................................................... 300 5.1.6.3.3. SMS AT Run White List - #SMSATWL ............................................................................................................. 301 5.1.6.3.4. Set TCP Run AT Service parameter - #TCPATRUNCFG .................................................................................. 302 5.1.6.3.5. TCP Run AT Service in listen (server) mode - #TCPATRUNL .......................................................................... 304



5.1.6.3.6. TCP AT Run Firewall List - #TCPATRUNFRWL ............................................................................................. 305 5.1.6.3.7. TCP AT Run Authentication Parameters List - #TCPATRUNAUTH................................................................. 306 5.1.6.3.8. TCP AT Run in dial (client) mode - #TCPATRUND .......................................................................................... 307 5.1.6.3.9. Closing TCP Run AT Socket - #TCPATRUNCLOSE ........................................................................................ 308 5.1.6.3.10. TCP AT Run Command Sequence - #TCPATCMDSEQ .................................................................................. 308 5.1.6.3.11. TCP Run AT service to a serial port - #TCPATCONSER................................................................................. 308 5.1.6.3.12. Run AT command execution - #ATRUNDELAY ............................................................................................. 310

5.1.6.4. Consume commands ................................................................................................................................................. 311 5.1.6.4.1. Configure consume parameters - #CONSUMECFG ........................................................................................... 311 5.1.6.4.2. Enable consume funztionality - #ENACONSUME ............................................................................................. 312 5.1.6.4.3. Report consume statistics - #STATSCONSUME ................................................................................................ 313 5.1.6.4.4. Block/unblock a type of service - #BLOCKCONSUME ..................................................................................... 315 5.1.6.4.5. #SGACT/#SSENDLINE configuration - #IPCONSUMECFG ........................................................................... 316 5.1.6.4.6. Open a connection, send data, close connection - #SSENDLINE ....................................................................... 317

5.1.6.5. Event Monitor Commands ........................................................................................................................................ 318 5.1.6.5.1. Enable EvMoni Service - #ENAEVMONI .......................................................................................................... 318 5.1.6.5.2. EvMoni Service parameter - #ENAEVMONICFG ............................................................................................. 319 5.1.6.5.3. Event Monitoring - #EVMONI............................................................................................................................ 320 5.1.6.5.4. Send Message - #CMGS ...................................................................................................................................... 324 5.1.6.5.5. Write Message To Memory - #CMGW ............................................................................................................... 326 5.1.6.5.6. AT Command Delay - #ATDELAY .................................................................................................................... 327

5.1.6.6. Multisocket AT Commands ...................................................................................................................................... 328 5.1.6.6.1. Socket Status - #SS .............................................................................................................................................. 328 5.1.6.6.2. Socket Info - #SI .................................................................................................................................................. 330 5.1.6.6.3. Socket Type - #ST ............................................................................................................................................... 331 5.1.6.6.4. Context Activation - #SGACT ............................................................................................................................ 332 5.1.6.6.5. Socket Shutdown - #SH ....................................................................................................................................... 333 5.1.6.6.6. Socket Configuration - #SCFG ............................................................................................................................ 333 5.1.6.6.7. Socket Configuration Extended - #SCFGEXT .................................................................................................... 335 5.1.6.6.8. Socket configuration Extended 2 - #SCFGEXT2 ................................................................................................ 337 5.1.6.6.9. Socket configuration Extended 3 - #SCFGEXT3 ................................................................................................ 340 5.1.6.6.10. Configure monosocket parameters - #APPSKTCFG ......................................................................................... 341 5.1.6.6.11. Socket Dial - #SD .............................................................................................................................................. 342 5.1.6.6.12. Socket Restore - #SO ......................................................................................................................................... 343 5.1.6.6.13. Socket Listen - #SL ........................................................................................................................................... 344 5.1.6.6.14. Socket Listen UDP - #SLUDP........................................................................................................................... 345 5.1.6.6.15. Socket Accept - #SA .......................................................................................................................................... 346 5.1.6.6.16. Socket Info Extended - #SIEXT ....................................................................................................................... 346 5.1.6.6.17. Detect the cause of a Socket disconnection - #SLASTCLOSURE .................................................................... 347 5.1.6.6.18. Receive Data In Command Mode - #SRECV .................................................................................................... 350 5.1.6.6.19. Send Data In Command Mode - #SSEND ......................................................................................................... 351 5.1.6.6.20. Send UDP data to a specific remote host - #SSENDUDP ................................................................................. 352 5.1.6.6.21. Send UDP data to a specific remote host extended #SSENDUDPEXT ............................................................. 354 5.1.6.6.22. Send data in Command Mode extended - #SSENDEXT ................................................................................... 355 5.1.6.6.23. IP Easy Authentication Type - #SGACTAUTH ................................................................................................ 356 5.1.6.6.24. Context activation and configuration - #SGACTCFG ....................................................................................... 356 5.1.6.6.25. Context activation and configuration extended - #SGACTCFGEXT ................................................................ 358 5.1.6.6.26. PAD command features - #PADCMD ............................................................................................................... 359 5.1.6.6.27. PAD forward character - #PADFWD ................................................................................................................ 359 5.1.6.6.28. Base64 encoding/decoding of socket sent/received data - #BASE64 ................................................................ 360 5.1.6.6.29. SSL Commands ................................................................................................................................................. 363

5.1.6.6.29.1. Open a socket SSL to a remote server - #SSLD ......................................................................................... 363 5.1.6.6.29.2. Enable a SSL socket - #SSLEN ................................................................................................................. 364 5.1.6.6.29.3. Close a SSL socket - #SSLH ..................................................................................................................... 366 5.1.6.6.29.4. Restore a SSL socket after a +++ - #SSLO ................................................................................................ 366 5.1.6.6.29.5. Read Data from a SSL socket - #SSLRECV .............................................................................................. 367 5.1.6.6.29.6. Report the status of a SSL socket - #SSLS ................................................................................................ 368 5.1.6.6.29.7. Manage the security data - #SSLSECDATA ............................................................................................. 369



5.1.6.6.29.8. Send data through a SSL socket - #SSLSEND .......................................................................................... 371 5.1.6.6.29.9. Send data through a secure sockect in Command Mode - #SSLSENDEXT .............................................. 372 5.1.6.6.29.10. Configure security parameters of a SSL socket - #SSLSECCFG ............................................................ 373 5.1.6.6.29.11. Configure additional parameters of a SSL socket - #SSLSECCFG2 ....................................................... 374 5.1.6.6.29.12. Configure general parameters of a SSL socket - #SSLCFG .................................................................... 375 5.1.6.6.29.13. Secure Socket Info - # SSLI ..................................................................................................................... 377

5.1.6.7. FTP AT Commands .................................................................................................................................................. 379 5.1.6.7.1. FTP Time-Out - #FTPTO .................................................................................................................................... 379 5.1.6.7.2. FTP Open - #FTPOPEN ...................................................................................................................................... 379 5.1.6.7.3. FTP Close - #FTPCLOSE ................................................................................................................................... 379 5.1.6.7.4. FTP Config - #FTPCFG ...................................................................................................................................... 380 5.1.6.7.5. FTP Put - #FTPPUT ............................................................................................................................................ 381 5.1.6.7.6. FTP Get - #FTPGET............................................................................................................................................ 382 5.1.6.7.7. FTP GET in command mode - #FTPGETPKT ................................................................................................... 382 5.1.6.7.8. FTP Type - #FTPTYPE ....................................................................................................................................... 383 5.1.6.7.9. FTP Read Message - #FTPMSG ......................................................................................................................... 383 5.1.6.7.10. FTP Delete - #FTPDELE................................................................................................................................... 384 5.1.6.7.11. FTP Print Working Directory - #FTPPWD ....................................................................................................... 384 5.1.6.7.12. FTP Change Working Directory - #FTPCWD ................................................................................................... 384 5.1.6.7.13. FTP List - #FTPLIST ........................................................................................................................................ 385 5.1.6.7.14. Get file size - #FTPFSIZE ................................................................................................................................. 385 5.1.6.7.15. FTP Append - #FTPAPP ................................................................................................................................... 385 5.1.6.7.16. Set restart position - # FTPREST ...................................................................................................................... 386 5.1.6.7.17. Receive Data In Command Mode - #FTPRECV ............................................................................................... 387

5.1.6.7.17.1. FTP Append ............................................................................................................................................... 389 5.1.6.7.17.2. FTPAPPEXT - #FTPAPPEXT .................................................................................................................. 390

5.1.6.7.18. Receive and store FTP server data - #FTPGETF ............................................................................................... 391 5.1.6.8. Enhanced IP Easy Extension AT Commands ........................................................................................................... 393

5.1.6.8.1. Authentication User ID - #USERID .................................................................................................................... 393 5.1.6.8.2. Authentication Password - #PASSW ................................................................................................................... 393 5.1.6.8.3. Packet Size - #PKTSZ ......................................................................................................................................... 394 5.1.6.8.4. Data Sending Time-Out - #DSTO ....................................................................................................................... 394 5.1.6.8.5. Socket Inactivity Time-Out - #SKTTO ............................................................................................................... 395 5.1.6.8.6. Socket Definition - #SKTSET ............................................................................................................................. 395 5.1.6.8.7. Query DNS - #QDNS .......................................................................................................................................... 397 5.1.6.8.8. DNS Response Caching - #CACHEDNS ............................................................................................................ 398 5.1.6.8.9. Manual DNS Selection - #DNS ........................................................................................................................... 399 5.1.6.8.10. Socket TCP Connection Time-Out - #SKTCT .................................................................................................. 400 5.1.6.8.11. Socket Parameters Save - #SKTSAV ................................................................................................................ 400 5.1.6.8.12. Socket Parameters Reset - #SKTRST ................................................................................................................ 401 5.1.6.8.13. GPRS Context Activation - #GPRS ................................................................................................................... 401 5.1.6.8.14. Socket Dial - #SKTD ......................................................................................................................................... 403 5.1.6.8.15. Socket Listen - #SKTL ...................................................................................................................................... 404 5.1.6.8.16. Socket Listen Ring Indicator - #E2SLRI ........................................................................................................... 406 5.1.6.8.17. Firewall Setup - #FRWL ................................................................................................................................... 406 5.1.6.8.18. Firewall Setup for IPV6 addresses - #FRWLIPV6 ............................................................................................ 407 5.1.6.8.19. GPRS Data Volume - #GDATAVOL ................................................................................................................ 409 5.1.6.8.20. ICMP Ping Support - #ICMP............................................................................................................................. 410 5.1.6.8.21. PING request - #PING ....................................................................................................................................... 411 5.1.6.8.22. DNS from Network - #NWDNS ........................................................................................................................ 412

5.1.6.9. SMS AT Commands ................................................................................................................................................. 413 5.1.6.9.1. Move Short Message to other memory - #SMSMOVE ....................................................................................... 413 5.1.6.9.2. SMS Commnads Operation Mode - #SMSMODE .............................................................................................. 414

5.1.6.10. E-mail Management AT Commands ........................................................................................................................ 415 5.1.6.10.1. E-mail SMTP Server - #ESMTP ....................................................................................................................... 415 5.1.6.10.2. E-mail Sender Address - #EADDR ................................................................................................................... 415 5.1.6.10.3. E-mail Authentication User Name - #EUSER ................................................................................................... 416 5.1.6.10.4. E-mail Authentication Password - #EPASSW ................................................................................................... 416



5.1.6.10.5. E-mail Sending - #EMAILD.............................................................................................................................. 417 5.1.6.10.6. E-mail Parameters Save - #ESAV ..................................................................................................................... 418 5.1.6.10.7. E-mail Parameters Reset - #ERST ..................................................................................................................... 418 5.1.6.10.8. SMTP Read Message - #EMAILMSG .............................................................................................................. 418 5.1.6.10.9. Send mail with attachment - #SMTPCL ............................................................................................................ 418 5.1.6.10.10. E-mail SMTP Port - #ESMTPPORT ............................................................................................................... 420 5.1.6.10.11. Configure SMTP parameters - #SMTPCFG .................................................................................................... 420

5.1.6.11. HTTP Client AT Commands ................................................................................................................................... 422 5.1.6.11.1. Configure HTTP Parameters - #HTTPCFG ...................................................................................................... 422 5.1.6.11.2. Send HTTP GET, HEAD or DELETE request - #HTTPQRY .......................................................................... 425 5.1.6.11.3. Send HTTP POST or PUT request - #HTTPSND ............................................................................................. 426 5.1.6.11.4. receive HTTP server data - #HTTPRCV ........................................................................................................... 428 5.1.6.11.5. Receive and store HTTP server data - #HTTPRCVF ........................................................................................ 429

5.1.6.12. Easy Script® Extension - Python Interpreter, AT Commands .............................................................................. 429 5.1.6.12.1. Write Script - #WSCRIPT ................................................................................................................................. 429 5.1.6.12.2. Select Active Script - #ESCRIPT ...................................................................................................................... 430 5.1.6.12.3. Script Execution Start Mode - #STARTMODESCR ......................................................................................... 432 5.1.6.12.4. Execute Active Script - #EXECSCR ................................................................................................................. 433 5.1.6.12.5. Read Script - #RSCRIPT ................................................................................................................................... 433 5.1.6.12.6. List Script Names - #LSCRIPT ......................................................................................................................... 434 5.1.6.12.7. Delete Script - #DSCRIPT ................................................................................................................................. 436 5.1.6.12.8. Delete All Scripts - #DASCRIPT ...................................................................................................................... 436 5.1.6.12.9. Reboot - #REBOOT .......................................................................................................................................... 436

5.1.6.13. SIM Toolkit Commands ........................................................................................................................................... 438 5.1.6.13.1. SIM Tookit Interface Activation - #STIA .......................................................................................................... 438 5.1.6.13.2. SIM Tookit Get Information - #STGI ................................................................................................................ 444 5.1.6.13.3. SIM Tookit Send Response - #STSR................................................................................................................. 450 5.1.6.13.4. SIM Tookit terminal Attach - #STTA ............................................................................................................... 451 5.1.6.13.5. Configure SIM Toolkit Application parameters - STACFG .............................................................................. 451

5.1.6.14. Phonebook AT Commands Set ................................................................................................................................. 453 5.1.6.14.1. Read Group Entries - #CPBGR ......................................................................................................................... 453 5.1.6.14.2. Write Group Entries - #CPBGW ....................................................................................................................... 454

5.1.6.15. GPS AT Commands Set ........................................................................................................................................... 455 5.1.6.15.1. GPS NVRAM Parameters Delete - $GPSNVRAM ........................................................................................... 455 5.1.6.15.2. GPS Quality of Service - $GPSQOS ................................................................................................................. 455 5.1.6.15.3. GPS Start Location Service Request - $GPSSLSR ............................................................................................ 457 5.1.6.15.4. GPS Stop Location Service Request - $GPSSTOP ............................................................................................ 463 5.1.6.15.5. Update SLP address - $LCSSLP ....................................................................................................................... 463 5.1.6.15.6. Update location information - $LCSLUI ..........................

HE910/UE910/UL865/UE866 AT Commands Reference Guide · A/a/. . • + • • 3+ • • @”,...

Documents

Transcript of HE910/UE910/UL865/UE866 AT Commands Reference Guide · A/a/. . • + • • 3+ • • @”,...