H D 7 0 0 S E R I E S F E A T U R E S

THE SHELBOURNE HD700 SERIES RANGE OF HEDGE AND VERGE TRIMMERS

HAS BEEN DEVELOPED HAND IN HAND WITH OWNER DRIVER CONTRACTORS

OVER THE LAST 10 YEARS AND IS AVAILABLE IN 5.5m FIXED BOOM,

6m TELESCOPIC AND 6.2m VARIABLE FORWARD REACH CONFIGURATIONS.

A range of specifications and configurations makes it suitable for both farmers and contractors.

All models in the HD range can either be 3 point linkage or axle mounted and feature a heavy duty

frame and king post design with folded steel tapered booms giving the strength where it is needed

and saving weight where possible.

The HD700 Series has been engineered to outperform other machines in tough conditions. Dyno

testing has developed a more efficient high pressure, low flow hydraulic system. This gives reduced

pressure drops through the system which in turn generate less heat and provide more power to the

cutting head. Two cast iron gear pumps are mated to the gearbox, the secondary pump provides

fast responsive arm movements.

All HD heads are driven by twin “v” belts. Due to the high

pressure drive no gearing up through the belt drive is

required, this means both pulleys are similarly sized giving

maximum belt wrap and performance. The fixed head to

boom mounting is slightly offset to compensate for the drive

weight, this means that the head sits level when the float

system is engaged. Both 1.2m and 1.5m heads can be

configured with either an inboard or outboard drive.

All HD 700 series machines are available as either right or

left side build machines and feature digital, programmable,

proportional joystick controls as standard.

The rotor is engaged electronically and

can be operated in either direction.

Hydraulic head and arm float systems

are standard, coupled to the high

powered hydraulics, this makes

the HD700 Series highly efficient

on power draining verge work.

The innovative flail head is available in 1.2m and 1.5m sizes

and features an open easy entry front chamber with rounded

anti-snagging corners. An optional hydraulically adjustable

roller is available which enables the operator to switch from

hedges to verges by moving a spool valve lever in the cab.

Brackets are available for saw blade attachment.

3 POINTSTABILISERFRAME

DIGITALPROPORTIONALJOYSTICKCONTROL

AXLE MOUNTINGSUB FRAME

HD762VFR WITH 1.2MOUTBOARD DRIVE HEAD

OPTIONS

• 85HP HYDRAULIC SYSTEM WITH 800 RPM PTO INPUT• ALL MODELS CAN BE 3 POINT LINKAGE OR AXLE MOUNTED

• HYDRAULIC HEAD ROLLER

• 1.5m BELT DRIVE FLAIL HEAD

• NARROW LANE BRACKET

• HYDRAULIC FRONT HEAD DEFLECTOR

• TWIN ACCUMULATOR FLOAT• HIGHWAY VISIBILITY KIT (INC CHEVRON HI VIS STICKERS, STROBES AND MAG ARROW)

• DEBRIS BLOWER

• VERGE HEAD KIT (INC 6" ROLLER AND SKIDS)

THE SHELBOURNE HD700 SERIES HAS BEEN ENGINEERED TOOUTPERFORM OTHER MACHINES IN TOUGH CONDITIONS

STANDARD FEATURES

• 70HP HYDRAULIC SYSTEM WITH 540 RPM PTO INPUT• DIGITAL PROPORTIONAL JOYSTICK CONTROL • OIL COOLER WITH AUTO-REVERSE FAN• HEAD FLOAT• ARM FLOAT• AUTO BREAK BACK RESET• 1.2m BELT DRIVE FLAIL HEAD• PARALLEL ARM GEOMETRY• LED LIGHTS• PARKING STANDS/ FORKLIFT SHOES• TRANSPORT SAFETY STOP AND CAB PROTECTOR BRACKET

H D 7 0 0 S E R I E S F E A T U R E S

THE SHELBOURNE HD700 SERIES RANGE OF HEDGE AND VERGE TRIMMERS

HAS BEEN DEVELOPED HAND IN HAND WITH OWNER DRIVER CONTRACTORS

OVER THE LAST 10 YEARS AND IS AVAILABLE IN 5.5m FIXED BOOM,

6m TELESCOPIC AND 6.2m VARIABLE FORWARD REACH CONFIGURATIONS.

A range of specifications and configurations makes it suitable for both farmers and contractors.

All models in the HD range can either be 3 point linkage or axle mounted and feature a heavy duty

frame and king post design with folded steel tapered booms giving the strength where it is needed

and saving weight where possible.

The HD700 Series has been engineered to outperform other machines in tough conditions. Dyno

testing has developed a more efficient high pressure, low flow hydraulic system. This gives reduced

pressure drops through the system which in turn generate less heat and provide more power to the

cutting head. Two cast iron gear pumps are mated to the gearbox, the secondary pump provides

fast responsive arm movements.

All HD heads are driven by twin “v” belts. Due to the high

pressure drive no gearing up through the belt drive is

required, this means both pulleys are similarly sized giving

maximum belt wrap and performance. The fixed head to

boom mounting is slightly offset to compensate for the drive

weight, this means that the head sits level when the float

system is engaged. Both 1.2m and 1.5m heads can be

configured with either an inboard or outboard drive.

All HD 700 series machines are available as either right or

left side build machines and feature digital, programmable,

proportional joystick controls as standard.

The rotor is engaged electronically and

can be operated in either direction.

Hydraulic head and arm float systems

are standard, coupled to the high

powered hydraulics, this makes

the HD700 Series highly efficient

on power draining verge work.

The innovative flail head is available in 1.2m and 1.5m sizes

and features an open easy entry front chamber with rounded

anti-snagging corners. An optional hydraulically adjustable

roller is available which enables the operator to switch from

hedges to verges by moving a spool valve lever in the cab.

Brackets are available for saw blade attachment.

3 POINTSTABILISERFRAME

DIGITALPROPORTIONALJOYSTICKCONTROL

AXLE MOUNTINGSUB FRAME

HD762VFR WITH 1.2MOUTBOARD DRIVE HEAD

OPTIONS

• 85HP HYDRAULIC SYSTEM WITH 800 RPM PTO INPUT• ALL MODELS CAN BE 3 POINT LINKAGE OR AXLE MOUNTED

• HYDRAULIC HEAD ROLLER

• 1.5m BELT DRIVE FLAIL HEAD

• NARROW LANE BRACKET

• HYDRAULIC FRONT HEAD DEFLECTOR

• TWIN ACCUMULATOR FLOAT• HIGHWAY VISIBILITY KIT (INC CHEVRON HI VIS STICKERS, STROBES AND MAG ARROW)

• DEBRIS BLOWER

• VERGE HEAD KIT (INC 6" ROLLER AND SKIDS)

THE SHELBOURNE HD700 SERIES HAS BEEN ENGINEERED TOOUTPERFORM OTHER MACHINES IN TOUGH CONDITIONS

STANDARD FEATURES

• 70HP HYDRAULIC SYSTEM WITH 540 RPM PTO INPUT• DIGITAL PROPORTIONAL JOYSTICK CONTROL • OIL COOLER WITH AUTO-REVERSE FAN• HEAD FLOAT• ARM FLOAT• AUTO BREAK BACK RESET• 1.2m BELT DRIVE FLAIL HEAD• PARALLEL ARM GEOMETRY• LED LIGHTS• PARKING STANDS/ FORKLIFT SHOES• TRANSPORT SAFETY STOP AND CAB PROTECTOR BRACKET

H D 7 0 0 S E R I E S F E A T U R E S

THE SHELBOURNE HD700 SERIES RANGE OF HEDGE AND VERGE TRIMMERS

HAS BEEN DEVELOPED HAND IN HAND WITH OWNER DRIVER CONTRACTORS

OVER THE LAST 10 YEARS AND IS AVAILABLE IN 5.5m FIXED BOOM,

6m TELESCOPIC AND 6.2m VARIABLE FORWARD REACH CONFIGURATIONS.

A range of specifications and configurations makes it suitable for both farmers and contractors.

All models in the HD range can either be 3 point linkage or axle mounted and feature a heavy duty

frame and king post design with folded steel tapered booms giving the strength where it is needed

and saving weight where possible.

The HD700 Series has been engineered to outperform other machines in tough conditions. Dyno

testing has developed a more efficient high pressure, low flow hydraulic system. This gives reduced

pressure drops through the system which in turn generate less heat and provide more power to the

cutting head. Two cast iron gear pumps are mated to the gearbox, the secondary pump provides

fast responsive arm movements.

All HD heads are driven by twin “v” belts. Due to the high

pressure drive no gearing up through the belt drive is

required, this means both pulleys are similarly sized giving

maximum belt wrap and performance. The fixed head to

boom mounting is slightly offset to compensate for the drive

weight, this means that the head sits level when the float

system is engaged. Both 1.2m and 1.5m heads can be

configured with either an inboard or outboard drive.

All HD 700 series machines are available as either right or

left side build machines and feature digital, programmable,

proportional joystick controls as standard.

The rotor is engaged electronically and

can be operated in either direction.

Hydraulic head and arm float systems

are standard, coupled to the high

powered hydraulics, this makes

the HD700 Series highly efficient

on power draining verge work.

The innovative flail head is available in 1.2m and 1.5m sizes

and features an open easy entry front chamber with rounded

anti-snagging corners. An optional hydraulically adjustable

roller is available which enables the operator to switch from

hedges to verges by moving a spool valve lever in the cab.

Brackets are available for saw blade attachment.

3 POINTSTABILISERFRAME

DIGITALPROPORTIONALJOYSTICKCONTROL

AXLE MOUNTINGSUB FRAME

HD762VFR WITH 1.2MOUTBOARD DRIVE HEAD

OPTIONS

• 85HP HYDRAULIC SYSTEM WITH 800 RPM PTO INPUT• ALL MODELS CAN BE 3 POINT LINKAGE OR AXLE MOUNTED

• HYDRAULIC HEAD ROLLER

• 1.5m BELT DRIVE FLAIL HEAD

• NARROW LANE BRACKET

• HYDRAULIC FRONT HEAD DEFLECTOR

• TWIN ACCUMULATOR FLOAT• HIGHWAY VISIBILITY KIT (INC CHEVRON HI VIS STICKERS, STROBES AND MAG ARROW)

• DEBRIS BLOWER

• VERGE HEAD KIT (INC 6" ROLLER AND SKIDS)

THE SHELBOURNE HD700 SERIES HAS BEEN ENGINEERED TOOUTPERFORM OTHER MACHINES IN TOUGH CONDITIONS

STANDARD FEATURES

• 70HP HYDRAULIC SYSTEM WITH 540 RPM PTO INPUT• DIGITAL PROPORTIONAL JOYSTICK CONTROL • OIL COOLER WITH AUTO-REVERSE FAN• HEAD FLOAT• ARM FLOAT• AUTO BREAK BACK RESET• 1.2m BELT DRIVE FLAIL HEAD• PARALLEL ARM GEOMETRY• LED LIGHTS• PARKING STANDS/ FORKLIFT SHOES• TRANSPORT SAFETY STOP AND CAB PROTECTOR BRACKET

SHELBOURNE.COM

H E D G E T R I M M E R

HD

70

0 S

ER

IES

R E Y N O L D ST E C H N I C A L D A T AHD700 SERIES

SHEPHERDS GROVE, STANTON, BURY ST EDMUNDS,SUFFOLK, IP31 2AR T: 01359 250415 F: 01359 250464SHELBOURNE.COM

SHELBOURNE REYNOLDSENGINEERING LTD.

FIN

D U

S:

HD700 SERIES AT A GLANCE

HD762VFRHD760THD755

2.29mt1.38mt

HD755 HD760T HD762VFR

Recommended

A L L D I M E N S I O N S A B O V E W I T H 1 . 2 M T H E A D

T E C H N I C A LS P E C I F I C A T I O N S

R E A C HD I M E N S I O N S

HD755: 5.5M REACH FIXED BOOM MACHINE, POPULAR FOR VERGE MOWING OPERATIONS AND FOR USE

ON TRACTORS WHEN THE REDUCED WEIGHT OF THE NON-TELESCOPIC BOOM IS IMPORTANT.

HD760T: 6.0M TELESCOPIC MACHINE, RANGING

FROM 4.8M FULLY RETRACTED TO 6.0M FULLY

EXTENDED. VERY COMPACT MACHINE FOR

NARROW LANE WORK.

HD762VFR: 6.2M REACH VARIABLE FORWARD

REACH MACHINE. CAN BE OPERATED WITH THE

ARM STRAIGHT OR UPTO 1.5M FORWARD FOR

IMPROVED VISIBILITY AND OPERATOR COMFORT.

SHELBOURNE.COM

H E D G E T R I M M E R

HD

70

0 S

ER

IES

R E Y N O L D ST E C H N I C A L D A T AHD700 SERIES

SHEPHERDS GROVE, STANTON, BURY ST EDMUNDS,SUFFOLK, IP31 2AR T: 01359 250415 F: 01359 250464SHELBOURNE.COM

SHELBOURNE REYNOLDSENGINEERING LTD.

FIN

D U

S:

HD700 SERIES AT A GLANCE

HD762VFRHD760THD755

2.29mt1.38mt

HD755 HD760T HD762VFR

Recommended

A L L D I M E N S I O N S A B O V E W I T H 1 . 2 M T H E A D

T E C H N I C A LS P E C I F I C A T I O N S

R E A C HD I M E N S I O N S

HD755: 5.5M REACH FIXED BOOM MACHINE, POPULAR FOR VERGE MOWING OPERATIONS AND FOR USE

ON TRACTORS WHEN THE REDUCED WEIGHT OF THE NON-TELESCOPIC BOOM IS IMPORTANT.

HD760T: 6.0M TELESCOPIC MACHINE, RANGING

FROM 4.8M FULLY RETRACTED TO 6.0M FULLY

EXTENDED. VERY COMPACT MACHINE FOR

NARROW LANE WORK.

HD762VFR: 6.2M REACH VARIABLE FORWARD

REACH MACHINE. CAN BE OPERATED WITH THE

ARM STRAIGHT OR UPTO 1.5M FORWARD FOR

IMPROVED VISIBILITY AND OPERATOR COMFORT.