HD2200 - Müggler Engineering ApSmueggler.dk/wp-content/uploads/2016/06/04.-HD2200-Series.pdf ·...
Transcript of HD2200 - Müggler Engineering ApSmueggler.dk/wp-content/uploads/2016/06/04.-HD2200-Series.pdf ·...
HD2200HYUNDAI WIA CNC Turning Center
The CNC Turning Center HD2200, designed by Hyundai WIA with years of expertise and the latest technology, is a Turning Center that maximizes productivity and performance.
Technical Leader HD2200mm(in)
mm(in)
inch
mm(in)
r/min
kW(HP)
mm(in)
EA
Ø550 (21.7″)
565 (22.2″)
8″
Ø65 (2.3″)
4,000 [4,000] [4,000]
18.5/15 (25/20) [18.5/15 (25/20)] [15/11 (20/15)]
210/580 (8.3″/22.8″)
12
Swing Over the Bed
Max. Turning Length
Chuck Size
Bar Capacity
Speed (rpm)
Motor (Max/Cont.)
Travel(X/Z)
No. of Tool
High Speed, Rigidity and ProductivityThe next generation CNC Turning Center
HD2200●45° slanted one-piece bed structure for high rigidity
●Stabilized Unit Structure to minimize thermal displacement
●User convenient structure for high productivity
●Excellent rapid traverse rate: 30m/min [1,181ipm] (Z-axis)
●Reliable, high speed servo turret: 0.12sec/step
●Box guideways for heavy duty cutting
●Compact design suitable for installation in restricted space
●Ergonomic design for convenient access to chuck and tool
01 Basic FeaturesThe Best Productivity 8 inch Heavy Duty CNC Turning CenterHD2200
TailstockTailstock enables stable machining of high quality products where quill travels up to 80mm (3″).
Box GuidewaysAll axes of HD2200 are designed with Box Guideways for better travel ability. Box Guideways show great performance in offsetting vibrations caused by heavy duty cutting.
Z-Axis High Performance MotorZ-axis feed ability is improved by installing high performance servo motor.
(Z-axis Rapid Traverse Rate : 30 m/min [1,181 ipm])
Sealed GIB StructureX-axis of HD2200 is designed to minimize the damage of turcite from chips by applying the sealed GIB structure.
0403
02
01
TurretThe turret is driven by a servo motor at a high speed indexing time of 0.12sec/step. Cycle time is reduced and productivity is improved.
Main SpindleHeat produced by the main spindle is blocked by applying a symmetric one-piece base and an insulation plate. This enables maintenance of high accuracy even during a long period of machining.
254 mm(10″)
◉ Rapid Traverse Rate (X/Z axis) : 24/30 m/min (945/1,181 ipm)
◉ Travel (X/Z axis) : 210/580 mm (8.3″/22.8″)
Powerful Cutting Capability & Wide Cutting Range
04+
05
Basic Structure
0102 04
05
03
High precision, High Rigidity, One-Piece StructureThe bed structure of the HD2200 is designed with combination of square type and tubular rib structure. It has a slope of 45 ° which helps maintain high rigidity. It shows great performance in heavy duty cutting, absorbing vibration and maintaining accuracy.
Integrated Cutting Oil TankThe coolant tank is installed at the front of the bed to prevent leakage, enabling stable machining with the use of high pressure coolant.
05
H
D22
00C
NC
Tur
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
02 High Precision SpindleLong Lasting, High Accuracy & Excellent PerformanceCNC Turning CenterHD2200
06+
07
H
D22
00C
NC
Tur
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
Main SpindleThe main spindle is designed with the same structure often found in larger sized machines. The combination of taper roller bearings and angular contact ball bearings leads to excellent heavy duty cutting performance.
Also, machining performance is enhanced by applying ribstar belt to minimize noise and belt slipping problems. The spindle is designed with a Labyrinth structure to minimize possible bearing damage from coolant and to improve machining stability.
Spindle CoolingA fan is installed on top of the head body and the rear of motor to minimize heat generation of the spindle.
Power & Torque Diagram
Spindle
POWER(kW [HP])
15.5[11.4]17.4[12.8]
1,000750 1,750 4,000
POWER(kW [HP])
Spindle Speed (r/min)
Torque Power
TORQUE(N∙m [lbf∙ft])
11[14.7]
0
15[20]
11kW [14.7HP] (60min/cont.)
15kW [20HP] (15min)
105[77.4]
191[140.8]
140[103.2]
105N∙m [77.4lbf∙ft] (cont.)
191N∙m [140.8lbf∙ft] (15min)
140N∙m [103.2lbf∙ft] (30min)
15.5[11.4]17.4[12.8]
667500 2,000 4,000
Spindle Speed (r/min)
Torque Power
TORQUE(N∙m [lbf∙ft])
15[20]
0
18.5[24.8]
15kW [20HP] (60min/cont.)
18.5kW [24.8HP] (15min)
214.8[158.4]
353.2[260.5]
286.4[211.2]
214.8N∙m [158.4lbf∙ft] (cont.)
353.2N∙m [260.5lbf∙ft] (15min)
286.4N∙m [211.2lbf∙ft] (30min)
POWER(kW [HP])
15.5[11.4]17.4[12.8]
Torque Power
TORQUE(N∙m [lbf∙ft])
15[20]
0
18.5[24.8]
15kW [20HP] (60min/cont.)
18.5kW [24.8HP] (15min)
125.3[92.4]
206[152]
167[123]
125.3N∙m [92.4lbf∙ft] (cont.)
206N∙m [152lbf∙ft] (15min)
167N∙m [123lbf∙ft] (30min)
1,143857 2,000 4,000
Spindle Speed (r/min)
Ø370 (14.6″)Max. Turning Dia.
03 Servo TurretHigh speed, High Accuracy, Highly Reliable Servo Turret HD2200
08+
09
H
D22
00C
NC
Tur
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
Machining
Machining Variation
Sample Workpiece
TurretThe turret of HD2200 is applied with high performance AC servo motor, improving machining reliability. 3-piece coupling shows excellent performance in indexing. Powerful hydraulic tool clamping minimizes tool tip deviation caused by load.
20 Bar(290 psi) High Pressure Coolant Turret is designed to utilize 20 bar(290 psi) high pressure coolant and it shows optimum performance in machining difficult-to-cut material.
◉ No. of Tools : 12 EA
◉ Tool O.D : □25(□1″)
◉ Tool I.D : Ø40(Ø1.6″)
◉ Indexing Time : 0.12 sec/step
O.D Cutting Drilling
I.D Cutting I.D Threading
20bar(290psi)
M12M10
HolderTo enhance rigidity, M10 bolts are used to fix holders and M12 bolts are used to fix boring bar holders.
04 Smart SystemSoftware for Smart Operating and MachiningHD2200E200 Series
HYUNDAI WIA Smart System
for CNC
Turning Center
Monitoring Functions Energy Saving
Easy Programming
HW-MMS | HW-TMHW-ESS
HW-DPRO T/TM | HW-eDNC
User Friendly
Faster processing and enhanced accuracy in are possiblethrough the HYUNDAI WIA Smart System. The user friendly software and equipment monitoring of the Smart System maximizes productivity.
USB Port (Standard)Convenience is increased when inputting and outputting program. The USB port is available in addition to the former input output methods such as CF memort card and LAN.
10+
11
H
D22
00C
NC
Tur
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
HW-TM(HYUNDAI WIA – Tool Monitoring)
A tool monitoring software which analyzes the load of the spindle motor to determine and monitor possible damage of tools.
HW-DPRO T/TM(HYUNDAI WIA – Dialogue PROgram Turn/TurnMill)
Using a dialogue method, this software makes it easy to work out a program for a lathe processing operation with complicated configurations. (Can be installed on a PC.)
HW-MMS(HYUNDAI WIA – Machine Monitoring System)
This software is for remote control monitoring of equipment status (mobile, PC.) It checks and manages the state of multiple machines and the progress of processing on a real time basis.
HW-eDNC(HYUNDAI WIA – Ethernet Direct Numerical Control)
This software allows transmition of NC data between PC and a machine's CNC. The processing programs can be managed on the PC through the ethernet or serial communication.
HW-ESS(HYUNDAI WIA – Energy Saving System)
An environmental friendly software that reduces the unnecessarily wasted standby power waiting for an operation.
HYUNDAI WIA Smart System
05 Automation SystemVarious Devices for User Convenience
Parts ConveyorThe parts conveyor transfers the finished workpiece unloaded by the parts catcher for user convenience.
Long Type 3m (118.1″)
Max load processing capa. Ø42 (1.7″)
Shot Type 1.5m (59.1″)
Max load processing capa. Ø65 (2.6″)
Bar Feeder System
Bar Feeder Bar feeder system enables automation which leads to efficiency improvement.
Round Bar Material
Bar Feeder Machining Parts Catcher Parts Conveyor
Bar Feeder Machining Process
HD2200
H
D22
00C
NC
Tur
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
Automation
12+
13
Raw Material In Work Stocker Clamping 1st Machining
End Product Out Work Stocker 2nd Machining Tilting
The high speed gantry loaders and the work stocker allow the implementation of automation cells. This enables machining process flexibility and productivity enhancement.
Door is designed to open up to 710mm(28") which is suitable for gantry automation.
Gantry Loader Machining Process
Gantry Loader System
710mm
(28″)
Standard & Optional
Main SpindleHollow Chuck 3 JawMain SpindleSolid Chuck 3 JawStandard Soft Jaw (1set)Chuck Clamp Foot Switch2 Steps Hyd, Pressure DeviceSpindle Inside Stopper5° IndexCs-Axis (0.001°)Chuck Open/Close Confirmation Device2 Steps Chuck Foot SwitchTurretTool HolderMill TurretStraight Milling Head (Axial)Angular Milling Head (Radial)Straight Milling Head (Axial)Angular Milling Head (Radial)Boring SleeveDrill SocketU-Drill HolderU-Drill Holder SleeveO.D Extension HolderSwivel HeadTail Stock & Steady RestQuill Type Tail StockProgramable Tail StockManual Type Hyd. Steady RestStandard Live Center (Tail Stock : Standard)High Precesion Live Center2 Steps Tail Stock Pressure SystemQuill Forward/Reverse Confirmation DeviceTail Stock Foot SwitchCoolant & Air BlowStandard Coolant (Nozzle)Chuck Coolant (Upper Chuck)Gun CoolantThrough Spindle Coolant (Only for Special Chuck)Thru Coolant for Live ToolChuck Air Blow (Upper Chuck)Tail Stock Air Blow (Upper Tail Stock)Turret Air BlowAir GunThrough Spindle Air Blow (Only for Special Chuck)
High Pressure Coolant
Power Coolant System (For Automation)Coolant Chiller (Olny fir Sub Tank, Chip Conveyor) Chip Disposal
Coolant Tank
Chip Conveyor Hinge(Tank Position/Chip Disposal) Scraper/ScrewSpecial Chip Conveyor (Drum Filter)
Chip Wagon
Safety DeviceDoor Inter-LockTotal Splash GuardChuck hydraulic pressure maintenance interlockBack Spin Torque Limiter (BST)
8″10″8″10″
Axial Collet Type,1eaCollet Type,1eaAdapter TypeAdapter Type
For Out-Dia
0.4Bar (5.8psi)6Bar (87psi)20Bar (290psi)
150ℓ(39.6gal)(Side)180ℓ(47.6gal)(Side)220ℓ(58gal)(Rear)Front (Right)Rear (Rear)
Standard(180ℓ[47.5 gal])Swing(200ℓ[52.8 gal])Large Swing(290ℓ[76.6 gal])Large Size(330ℓ[87.2 gal])Customized
Spindle & Chuck Electric Device
● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable
HD2200●-○-●●○☆☆-
○(CE:●)○
●-----●●○○☆-
●--●○☆○☆
●○○☆-○○☆○-●○○☆-
●● (Only for High Pressure Coolant 20 bar [290psi])
○○○-
○
○
○
○
☆
●●
○(CE:●)●
HD2200●○○○-○-○-○○○○○○○-☆○○○
○○○○○☆--
☆
○-○○○☆
○☆☆○☆○○☆○○○☆☆☆
●
●
☆○○○☆☆
●☆☆
Call LightCall LightCall Light & BuzzerElectric Cabinet LightRemote MPG
Spindle Load Meter
Spindle Speed Meter
Work CounterTotal CounterTool Counter
Multi Tool Counter
Electric Circuit Breaker
ABS Encoder
AVR (Auto Voltage Regulator)TransformerFlash Memory CardAuto Power OffMeasurementManual Q-Setter (Domestic General Type)Manual Q-Setter (Renishaw)Automatic Q-Setter (Renishaw)Work Close Confirmation Device(Only for Special Chuck)Auto Tool Measuring Device
Linear Scale
Coolant Level Sensor (Only for Chip Conveyor, bladder Type)Environment
Air Conditioner
DehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & AutomationAuto DoorAuto Shutter (Only for Automatic System)Sub Operation PannelBar Feeder InterfaceBar Feeder (FEDEK)workpusher (Spring type)Extra M-Code 4eaAutomation InterfaceI/O Extension(IN & OUT)Parts CatcherTurret Work Pusher (For Automation)Parts Conveyor (Required Main Parts Catcher)Semi Automation SystemHyd. DeviceStandard Hyd. Cylinder
Standard Hyd. Unit
S/WMachine Guidance (HW-MCG : FANUC)Tool Monitoring (HW-TM : FANUC)DNC software (HW-eDNC : FANUC)Interactive ProgramEnergy Saving System (HW-ESS : FANUC)Machine Monitoring System (HW-MMS : FANUC)ETCTool BoxCustomized ColorCAD & CAM
1Color : ■3Color : ■■■3Color : ■■■B
FANUC (Mounted Type)SIEMENS (Built-in Type)FANUC (Mounted Type)SIEMENS (Built-in Type)DigitalDigitalDigital6ea9ea
FANUCSIEMENS
20kVA
TACOSMC
X axisZ axis
FANUCSIEMENS
16Contact32ContactMain SP.
Hollow35bar (507.6 psi)/ 15ℓ (4gal)
Need Munsel No.
Specifications are subject to change without notice for improvement.
SPECIFICATIONS
unit : mm(in)External Dimensions
14+
15
H
D22
00C
NC
Tur
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
SPECIFICATIONS
150(5.9)
767 (30.2) 817 (32.2) 887 (35) 158(6.2)
1110
(43.
7)71
0 (2
7.9)
141(5.5)
928 (36.5)
1138 (44.8) 1650 (65)
1856 (73.1)
1000 (39.4) 1517.5 (59.7) 266.5(10.5)
474
(18.
7)11
76 (4
6.3)
2925 (115.2)
4153 (163.5)
710 (27.9)(DOOR STROKE)
5 (0.2)
676 (26.6)974 (38.3)
450
(17.
7)
422
(16.
6)40
2 (1
5.8)
826
(32.
5)
2784 (109.6)
1013
(40)
298
(11.
7)69
2 (2
7.2)
120
(4.7
)
1825
(71.
9)
1228 (48.3)
1000
(39.
4)
1200
(47.
2)1820
(71.
7)
2788 (110)
12 Stations
VDI 3012 Stations
O.D Holder
I.D Holder
Boring BarSocket
Facing Holder
Face & I.DTool
Boring Bar
Drill
Boring BarBoring Bar
Socket
U-Drill Socket U-Drill Holder
Boring BarHolder Pice
Facing Holder
Face & I.D Tool
Boring BarØ32
Drill
U-Drill
Tap
End Mill
StraightMill Holder
Milling Collet
Tapping Collet
AngularMill Holder
Plug
unit : mm(in)Tooling System
SPECIFICATIONS
Right/Left
Single
Ø32
Ø40
Standard
Standard
Ø8 (5/16″)
Ø10 (3/8″)
Ø12 (1/2″)
Ø16 (5/8″)
Ø20 (3/4″)
MT 1 × MT 2
MT 2
O.D Holder
Facing Holder
I.D Holder
U-Drill Holder
Straight Mill Holder
Angular Mill Holder
Boring
Drill
ER Collet
Turning Holder
Driven Holder
Boring Holder
Socket
ITEM HD2200
-
1
5
-
Opt
-
-
-
1
1
1
1
1
1
-
Tooling Parts Detail
Specifications are subject to change without notice for improvement.
16+
17
H
D22
00C
NC
Tur
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
SPECIFICATIONS
unit : mm(in)Interference
190
(7.5
)20 (0.8
)
210
(8.3
)(X
-axi
s st
.)
580 (22.8)(Z-axis st.)
565 (22.2)(Max. Turning Length)
7(0.3) 70
(2.8)91 (3.6)
25(1)
15(0.6)
190 (7.5) 20(0.8)
210 (8.3)(X-STROKE)
Ø550 (21.7)
BED SWING
10 (0.4
)
115 (4.5) 35(1.4)
185 (7.3)185 (7.3)
410 (16.1)
10(0.4)
Ø579 (22.8)
TOOL POST SWING
Ø40 (1.6)
Ø210(8.3)
68(2.7)
5(0.2)
I.D Tool Holder
O.D Tool Holder
157
(6.2
)20 (0.8
)
210
(8.3
)(X
-axi
s st
.)
580 (22.8)(Z-axis st.)
565 (22.2)(Max. Turning Length)
91 (3.6)
15(0.6)
68(2.7)
5(0.2)
70
Ø370
(14.
6)
SAD
DLE
SWIN
G
35 (1.4
)
21 (0.8)
47(1.9)
513.7 (20.2) (Tail stock travel)
91(3.6)
39(1.5)
54(2.1)
47(1.9)
513.7 (20.2) (Tail stock travel)
91(3.6)
39(1.5)
54(2.1)
21 (0.8)
Ø21
0 (8
″)Ø
210
(8″)
unit : mm(in)Tooling Travel Range
SPECIFICATIONS
190
(7.5
)20 (0.8
)
210
(8.3
)(X
-axi
s st
.)
580 (22.8)(Z-axis st.)
565 (22.2)(Max. Turning Length)
7(0.3) 70
(2.8)91 (3.6)
25(1)
15(0.6)
190 (7.5) 20(0.8)
210 (8.3)(X-STROKE)
Ø550 (21.7)
BED SWING
10 (0.4
)
115 (4.5) 35(1.4)
185 (7.3)185 (7.3)
410 (16.1)
10(0.4)
Ø579 (22.8)
TOOL POST SWING
Ø40 (1.6)
Ø210(8.3)
68(2.7)
5(0.2)
I.D Tool Holder
O.D Tool Holder
157
(6.2
)20 (0.8
)
210
(8.3
)(X
-axi
s st
.)
580 (22.8)(Z-axis st.)
565 (22.2)(Max. Turning Length)
91 (3.6)
15(0.6)
68(2.7)
5(0.2)
70
Ø370
(14.
6)
SAD
DLE
SWIN
G
35 (1.4
)
21 (0.8)
47(1.9)
513.7 (20.2) (Tail stock travel)
91(3.6)
39(1.5)
54(2.1)
47(1.9)
513.7 (20.2) (Tail stock travel)
91(3.6)
39(1.5)
54(2.1)
21 (0.8)
Ø21
0 (8
″)Ø
210
(8″)
18+
19
H
D22
00C
NC
Tur
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
SPECIFICATIONS
Specifications are subject to change without notice for improvement.
Swing Over the Bed
Swing Over the Carriage
Max. Turning Dia.
Max. Turning Length
Bar Capacity
Chuck Size
Spindle Bore
Spindle Speed (rpm)
Motor (Max/Cont.)
Torque (Max/Cont.)
Spindle Type
Spindle Nose
C-axis Indexing
Travel (X/Z)
Rapid Traverse Rate (X/Z)
Slide Type
No. of Tool
Tool Size OD
ID
Indexing Time
Motor (Max/Cont.)
Milling Tool Speed (rpm)
Torque (Max/Cont.)
Collet Size
Type
Taper
Quill Dia.
Quill Travel
Travel
Coolant Tank
Lubricating Tank
Electric Power Supply
Thickness of Power Cable
Voltage
Floor Space (L×W)
Height
Weight
Controller
CAPACITY
FEED
TANkCAPACITY
SPINDlE
TURRET
lIvE TOOl
TAIlSTOCk
MACHINE
NC
POWERSUPPlY
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
inch
mm(in)
r/min
kW(HP)
N・m(lbf・ft)
-
-
deg
mm(in)
m/min(ipm)
-
EA
mm(in)
mm(in)
sec/step
kW(HP)
r/min
N・m(lbf・ft)
mm(in)
-
-
mm(in)
mm(in)
mm(in)
ℓ(gal)
ℓ(gal)
kVA
Sq
V/Hz
mm(in)
mm(in)
kg(lb)
-
ITEM HD2200
Ø550 (21.7″)
Ø370 (14.6″)
Ø370 (14.6″)
565 (22.2″)
Ø65 (2.6″)
8″
Ø78 (3.1″)
4,000 [4,000] [4,000]
18.5/15 (24.8/20] [18.5/15 (24.8/20)] [15/11 (20/15)]
206/125.3(152/92.4) [353.2/214.8(260.5/158.4)] [191/105(140.8/77.4)]
BELT
A2-6
-
210/580 (8.6″/22.8″)
24/30 (944.8/1,181)
BOX GUIDE
12
□25 (1″)
Ø40 (1.6″)
0.12
-
-
-
-
-
MT4
Ø65 (2.6″)
80 (3.1″)
513 (20.2″)
150 (39.6)
1.8 (0.5)
17
OVER 16
220/60 (200/50)
2,925×1,650 (115.2″×65″)
1,820 (71.7″)
4,100 (9,039)
HYUNDAI WIA FANUC i Series
Specifications [ ] : Option
CONTROLLER
HYUNDAI WIA FANUC i SeriesControl function / Screen display
Control axis number
Simultaneous control axis number
Min. input unit
Min. increment
High speed HRV controlInch/metric conversionInterlockMachinelockEmergency stopStroke check 1Stroke check 2Stroke check 3Follow upSub off
Backlash compensation
Position switchFault load detectionHigh resolution transfer control(HRM) LCD / MDIOperation Auto handling (memory)MDI handlingSearch functionProgram re-startPreventive function for mis-handlingBuffer registrationProgram check functionSingle blockFeed functionManual jog feedManual Handle ScaleFeed commandFeed overrideJog overrideRapid transfer overrideOverride releaseTransfer/minute, Transfer/rpmProgram input and interpolation function
Nano interpolation
Dwell functionThreading retractVariable lead threadingReturn of first zero pointReturn check of zero pointReturn of second zero pointProgram stop/overTape codeOptional block skipMax. program enter unitProgram numberAbsolute, incremental programmingDecimal number enteringPlain selectionWork coordinate selectionManual absoluteDrawing dimension direct input programmingG code systemProgrammable data inputSub program callCustom macro BCustom macro variable additionMultiple repetitive cyclesMultiple repetitive cycles ⅡLathe fixed cycle
Max. 4 axisX, Z axisX, Z, C axis (M type machine)2 axis/straight, arc interpolation (Max. 4 axis)X, Z axis : 0.001 mm (0.0001″)C axis : 0.001 degX, Z axis : 0.001 mm (0.0001″)C axis: 0.001 deg
G20 / G21Each axis / All axisFull axis
Over-travel
+/- 0~9999 Pulse(Rapid traverse & cutting feed)
Back spin torque limiter (BST)
8.4″ Color LCD
Sequence, Program
Dry run, Program check
Rapid transfer, Jog, Handlex1, x10, x100Direct command for F code feed0~200% (10% units)0~2,000 mm/min [79 ipm]F1, F5, F25/F50, F100%
Positioning/Straight/Arc(G00/G01/G02/G03)G04, 0~9999.9999 sec
G28, ManualG27G30M00, M01 / M02, M30EIA / ISO1 EA+/- 9999.9999”O+4 digit number
G17, G18, G19G52 to G59“ON” fixedIncluded chamfering / Corner R`A/B/CG1010 Steps
#100 to #199, #500 to #999
Sub / Main spindle functionM-Code functionM-Code function lockLock sp. speed commandMain sp. constant controlSpindle speed overrideSpindle position decisionRigid tappingTool function / Tool compensationTool functionTool offset quantityTool offsetTool nose radius compensationConfiguration/wear compensationDirect input of measuring tool compensation BTool life managementData input, output and editing functionInput/output interfaceMemory card input and outputProgram storing capacityProgram registration quantityMemory lockBackground editAdditional expandable editScreen, diagnosis and setting functionSelf diagnosis functionHistoric screenHelp functionOutside messageOperation time/counter displayActual sp. speed, T code displayActual machining feed rate displayHandling monitor screenGraphic screenSpindle/servo setting screenLanguagesLCD screen saveAuto data backupFunction according with machine specificationCs contouring functionStored pitch error compensationPole coordinate commandCylinder interpolationDrill fixed cycleSp. positioning expandableControlling live tool by servo motor
OptionHigh speed EthernetOptional block skip3rd & 4th reference point returnData serverPolygon turningHelical interpolationDynamic graphic display8 level data protection functionManual guide i
Figures in inch are converted from metric values.Design and specifications are subject to change without notice.
M4 digit number
S + 4 digit number, binary number outputG96, G9750% ~ 150% (10% unit)
T2 + 264 pairs
G40, G41, G42
RS232C, Memory Card
1280m/512kbMax. 500 programs
NC program copy, move, change
Alarm and handling screen
Rod meter light
Selection of random 5 EAScreen saver
Turn millTurn millTurn millTurn millTurn millTurn millTurn mill
100 Mbps (Option board is required)9 EA
1GB
Interactive program (10.4″ Color LCD)
20+
21
H
D22
00C
NC
Tur
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
GLOBAL NETWORk
Changwon Technical Center / R&D Center / Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea (Zip Code : 51533)TEL : +82 55 280 9114 FAX : +82 55 282 9680
Uiwang Technical Center / R&D Center37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do, Korea (Zip Code : 16082)TEL : +82 31 596 8209 Fax : +82 55 210 9804
HEADqUARTER
OVERSEAS OFFICESHYUNDAI WIAMachine Tools America 265, Spring Lake Drive, Itasca, IL, 60143
TEL : +1 201 489 2887 FAX : +1 201 489 2723
Jiangsu HYUNDAI WIANo.6 Fenghuang Road, Fenghuang Town, Zhangjjagang City, Jiangsu province, China
TEL : +86 512 5672 6808FAX : +86 512 5671 6960
Chengdu OfficeNO.508 Room, B Block, AFC Plaza, NO.88 Jiaozi Road, High-tech Zone, Chengdu, China 610041
TEL : +86 28 8665 5550FAX : +86 28 8666 2985
HYUNDAI WIAMachine Tools Europe Kaiserleipromenade 5, D-63067 Offenbach, Germany
TEL : +49 69271 472 701FAX : +49 69271 472 719
Hyundai WIA Machine Tools ChinaShanghai Office1-3F, Bldg6, No.1535 Hongmei Road, Xuhui District, Shanghai, China, 200233
TEL : +86 21 6427 9885FAX : +86 21 3431 0376
Wuhan Office Room 302, B tower, Donghe Center, Dongfeng three road, Zhuankou, Wuhan, Hubei, China 430056
TEL : +86 27 5956 3256~7FAX : +86 27 5952 3258
Raunheim Service CenterRaunheim R&D CenterKelsterbacher Strasse 51, 65479 Raunheim, Germany
TEL : +49 6142 9256 0 FAX : +49 6142 834 100
Beijing Office13 Floor Building B Zhonghangji square, No.15 Ronghua South Road, Yizhuang Economic and Technological Development Zone District, Beijing, China 100176
TEL : +86 10 8453 9850~2FAX : +86 10 8453 9853
qingdao OfficeRoom 1207, Caifu Building, 182-6 Haier Middle Road, Qingdao, China 266061
TEL : +86 532 8667 9333~5FAX : +86 532 8667 9338
Inida Office#4/169, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai-600 096, Tamilnadu, IndiaTEL: +91-44-3290-1719
Guangzhou OfficeRoom 311, Unit 1-3, Poly Tal Tu Wun, Hanxi Avenue, Panyu District, Guangzhou, China 511400
TEL : +86 20 8550 6595~6 FAX : +86 20 8550 6597
Shenyang OfficeRoom 1304, NO.53 Beizhan Road, Shenhe District, Shenyang, China 110013
TEL : +86 24 3228 6640FAX : +86 24 3228 6642
2015-12 002.002 ENG
Head Office & Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do
Tel +82 55 280 9206, 9299 Fax +82 55 210 9804
machine.hyundai-wia.com
Overseas Sales Team16F, 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do
Tel +82 31 593 8173