Hd terMINatIoN sYsteM - Coroflot...2.3 Do the same with the bottom ribbon 2.4 Important! Slide wire...
1
PRODUCT RELEASE Liberty AV Solutions | www.LibAV.com | 800.530.8998 | +1-719-388-7526 HD TERMINATION SYSTEM PERFECT FOR CUSTOM LENGTHS COMPATIBLE CUSTOMIZE CABLE LENGTHS WITH OUR HD TERMINATION SYSTEM! • HDMI field install termination • Customize your lengths to dress racks or minimize excess cable • Locking HDMI connector technology increases retention up to 400% • Supports HDMI with Ethernet, CEC and bi-directional Audio formats • Send 1080p video up to 30ft (typical) -Up to 55ft with optional extender With Liberty’s HDMI ribbon cable, preparation is much easier than working with individual discrete wires! SCAN TO SAVE A LINK TO THIS PDF TERMINATE IN MINUTES! 5 Watch it at www.LibAV.com! PACK OF 10 CONNECTORS & SHELLS DL-HDMCPK CRIMP TOOL DL-HDMHT RIBBON CABLE - 250 FEET LENGTH DL-HDMCBL-250 RIBBON CABLE - 500 FEET LENGTH DL-HDMCBL-500 CRIMP TOOL RIBBON CABLE PACK OF 10 CONNECTORS & SHELLS
Transcript of Hd terMINatIoN sYsteM - Coroflot...2.3 Do the same with the bottom ribbon 2.4 Important! Slide wire...
product release
Liberty AV Solutions | www.LibAV.com | 800.530.8998 | +1-719-388-7526
Hd terMINatIoN sYsteM
perfect forcustoM leNGtHs
COMPATIBLE
custoMIze cable leNGtHs wItH our Hd terMINatIoN sYsteM!• HDMI field install termination
• Customize your lengths to dress racks or minimize excess cable
• Locking HDMI connector technology increases retention up to 400%
• Supports HDMI with Ethernet, CEC and bi-directional Audio formats
• Send 1080p video up to 30ft (typical) -Up to 55ft with optional extender
With Liberty’s HDMI ribbon cable, preparation is much easier than working with individual discrete wires!
SCAN TO SAVE A LINK TO THIS PDF
terMINate IN MINutes!
Website: www.luxielectronics.com Email: [email protected]
Phone: +1 (949) 654-2047 Address: Irvine, CA, USA
HDMI DIY user manual (for ribbon cable) Revision: 0.54 Date: 12/29/2010
Step 2, ribbon threading 2.1 First identify the embossed arrow on the
outer side of each wire holder
2.2 Slide top ribbon in the direction of the arrow
with the red stripe line up with the arrow side
2.3 Do the same with the bottom ribbon
2.4 Important! Slide wire holders as far as it can go
2.5 Trim the excessive ribbon with the blades on the
tool
2.6 You may need to pull the wire holders slightly
outwards to flush the edge to the ribbon end
5
watch it at www.libaV.com!
PAck of 10 connectorS & SHeLLS DL-HDMcPk
crIMP tooL DL-HDMHt
rIbbon cAbLe - 250 feet LengtH DL-HDMcbL-250
rIbbon cAbLe - 500 feet LengtH DL-HDMcbL-500
Crimp tooL ribbon CAbLepACk of 10 ConneCtors & sheLLs
