HD-3012 - EXTRON \| CNC

$: HD-3012 - EXTRON \| CNC$

HD-3012SUPER RIGIDITY BRIDGE TYPE MACHINING CENTER

Strengthened major casting structure increase overall rigidity up to 30%.

6,000 rpm gear spindle equips 26 kW high power spindle motor which can fulfill heavy cutting needs.

X / Y axes adopt roller type linear guide ways, and Z-axis adopts high rigidity box ways, optimized axial

system features heavy table load and fast movement characteristics.

Large size Ø 63 mm ball screw on X-axis greatly improve capability of axial load and extend life of usage.

Superior 7 kW servo motor on X-axis highly increases axial thrust.

Model

X / Y / Z axes travel 3,000 / 1,200 / 760 mm

Distance from spindle nose to table top 200 ~ 960 mm

Distance between columns 1,300 mm

Table size ( X x Y ) 3,000 x 1,100 mm

Table load capacity 5,500 kg

Spindle motor ( Cont. / 30 min. ) 22 / 26 kW

Spindle speed 6,000 rpm

Spindle taper DIN 50

X / Y / Z axes rapid feed rate 20 / 24 / 15 m/min.

Cutting feed rate 10 m/min.

Tool magazine capacity 40 T

NC control FANUC Oi -MF

Machine weight 22,500 kg

HD-3012

Specifications are subject to change without notice.

HD V.S Previous Model

55% 24% 42%

Chips removal rate ( cc / kW ) Cross section area of column Contact area between column & bed

Model

X / Y / Z axes travel 635 / 535 / 460 mm

Rotary range of B-axis -50o ~ +110o

Rotary range of C-axis 360o

Rotary speed of B / C axes 25 rpm


Table diameter ( inner / outer ) Ø 500 / 650 mm

Table load capacity 300 kg ( 0o ~ 45o )



X / Y / Z axes rapid feed rate 36 m/min.



NC control HEIDENHAIN iTNC 530


FCV-620


Model

X / Y / Z axes travel 1,400 / 620 / 620 mm

Distance from spindle center to column 790 mm


Table size ( X x Y ) 1,500 x 620 mm


Spindle motor ( Cont. / 30 min. ) 7.5 / 11 kW


Spindle taper DIN 40




NC control FANUC Oi -MF


AF-1460


FCV-620 AF-1460HIGH SPEED 5-AXIS MACHINING CENTER HIGH PERFORMANCE VERTICAL MACHINING CENTER

Equipped with 12,000 rpm high speed

direct drive spindle ( 20,000 rpm built-in

spindle Opt. )

Super rigidity roller type linear guide ways.

Super rigidity movable column C-shape

structure minimizes floor space.

Ultimate rotary table of B / C axes

- Worm gear driven by servo motor

- Circular hydraulic brake system

- Standard HEIDENHAIN rotary linear scale

Super rigidity ( Delta ) body structure provides the foundation of heavy load and

powerful cutting.

3 axes adopt linear guide ways to provide

t h e o p t i m u m c o n t r o l a n d e f f i c i e n t

movement, rapid feed rates are up to 48

m/min.

Z-axis could adopt with heat treated box

way struc ture with gear spindle. Ver y

suitable for heavy cutting requirements.

The quantity of chip augers depends on

size of machine, which provides the most

effective chip removal solution.

Gang tooling system

Sub-spindle X2 & Z2 axes

GTW-1500YTURRET / GANG TOOLING TURNING CENTER

Combined with turret and gang tooling systems is more convenient for programming, and makes

series high efficiency and economic.

Brand new design of X-axis on sub-spindle provides high efficiency of working space. The gang

tooling can continue working after catch the work-piece from sub-spindle. It is no need to return

to home position which increases the efficiency of machining.

Standard twin Y-axis function with driven turret, gang tooling system and C-axis can improve the

ability for complex machining and accuracy.

With separated coolant tank and rear side of chips conveyor design, it is easy to maintain and

provide high efficiency for cooling.

Model

Max. swing diameter Ø 550 mm

Max. turning diameter Ø 250 mm

Max. turning length 210 mm

Chuck size 6"

Spindle nose A2-5



X1 / X2 axes travel 180 / 314 mm

Z1 / Z2 axes travel 268 / 522 mm

X1 / X2 axes rapid feed rate 18 / 24 m/min.

Z1 / Z2 axes rapid feed rate 30 m/min.

Live tooling turret stations 12

Gang tooling stations 8

Y1 / Y2 axes travel ± 35 / 250 mm

Y1 / Y2 axes rapid feed rate 10 / 24 m/min.

CNC control G.LINC 350


GTW-1500Y


GTZ-2600Y GLS-2000LYSTWIN SPINDLES & TURRETS TURNING CENTER HIGH SPEED TURNING CENTER

Model




Chuck size 8" ( Big-bore )

Spindle nose A2-6



X / Z axes travel 230 / 600 mm

X / Z1 / Z2 axes rapid feed rate 30 m/min.


Y-axis travel 70 mm = ± 35 mm

Y-axis rapid feed rate 10 m/min.

NC control G.LINC 350


GLS-2000LYS


Model




Chuck size 8"

Spindle nose A2-6


Spindle motor ( Cont. / 30 min. ) 13.5 / 30 kW

X1 / X2 axes travel 195 / 210 mm

Z1 / Z2 axes travel 470 mm

X / Z axes rapid feed rate 24 m/min.

Live tooling turret stations 16 +16

Y-axis travel 100 = ± 50 mm

NC control SIEMENS 828D


GTZ-2600Y


Upper and lower turret can be arranged

flexibly. Thus, process 1 and process 2 can

process at the same time to increase the

production capability.

Upper and lower turret can process the

long bar simultaneously to decrease the

c ycle t ime and increase roundness of

work-piece.

The low center of gravity 45o slant bed

design provide a super rigid foundation for

the headstock and turret.

With the optional 16-station live tooling

turret, maximum tool station capacity is up

to 32 tools, which can easily satisfy various

machining requirements.

Compact machine size. Provides full multi-

tasking turning capabilities by live turret, sub-

spindle, and Y-axis.

30˚ slant bed Meehanite casting structure

provides extremely solid base.

One-piece super rigidity headstock with heat

sink can reduce the body heat displacement

and improve precision.

X / Z axes are driven by high performance AC

servo motor. Rapid feed rate reachs up to 30

m/min.

Standard 12-stantion servo indexing turret

achieves 0.2 sec indexing time for adjacent

stations, and 0.5 sec for stations at the

oppoiste end of disk.

Model SW-20 SW-32 SW-42

Working range

Max. machining diameter Ø 20 mm Ø 32 mm Ø 42 mm

Max. chuck movement 207 mm 315 mm 110 mm

Backwork processing length 80 mm 130 mm 110 mm

Max. speedSpindle 10,000 rpm 7,000 rpm 6,000 rpm

Sub-spindle 8,000 rpm 7,000 rpm 6,000 rpm

O.D. tools Number of tools 6 6 5

Dimensions □ 12 mm □ 16 mm □ 20 mm

Number of I.D. tools 4 4 5

Slide live toolNumber of tools 5 ~ 10 5 ~ 10 4 ~ 6

Max. tool speed 8,000 rpm 6,000 rpm 6,000 rpm

Back working toolNumber of tools 4 4 4

Max. tool speed 8,000 rpm 5,000 rpm 5,000 rpm

Rapids 30 m/min. 30 m/min. 30 m/min.

NC control FANUC 31i FANUC 31i FANUC 31i

Machine weight 2,300 kg 3,200 kg 3,300 kg


SD / SW seriesSWISS TURNING CENTERS

Simultaneously 4 axes machining, up to 9 axes control.

Main & sub-spindle simultaneous machining on both ends and can

equip with bar feeder.

Model SD-16 SD-20

Working range

Max. machining diameter Ø 16 mm Ø 20 mm

Max. chuck movement 175 mm 175 mm

Backwork processing length 80 mm 80 mm

Max. speedSpindle 10,000 rpm 10,000 rpm

Sub-spindle 8,000 rpm 10,000 rpm

O.D. tools Number of tools 6 6

Dimensions □ 12 mm □ 12 mm

Number of I.D. tools 4 4

Slide live toolNumber of tools 2 4

Max. tool speed 8,000 rpm 6,000 rpm

Back working toolNumber of tools 4 4

Max. tool speed - -

Rapids 30 m/min. 30 m/min.

NC control FANUC Oi -TF FANUC Oi -TF

Machine weight 2,000 kg 2,100 kg


GV-1600M GV-780MSUPER RIGIDITY VERTICAL TURNING CENTER HIGH SPEED VERTICAL TURNING CENTER


Model GV-1600M

Table diameter Ø 1,600 mm

Max. swing diameter Ø 2,000 mm

Max. turning diameter Ø 1,800 mm

Max. turning length 1,300 mm


Work-piece spindle ( Cont. / 30 min. ) 37 / 45 kW

Work-piece spindle speed 250 rpm

Live tooling spindle ( Cont. / 30 min. ) 11 / 15 kW

X / Z axes travel 1,160 / 900 mm

W-axis travel 800 mm

X / Z axes rapid feed rate 12 / 10 m/min.


Machine weight 25,500 kg Specifications are subject to change without notice.

Model GV- 780M




Chuck size 15"

Spindle nose A2-11



X / Z axes travel 500 / 670 mm

X / Z axes rapids 20 m/min.




High torque gear type tooling spindle

/ wor k-piece spindle, tool ing spindle

provides up to 361 N-m of torque.

Meehanite large scale column and bed

structure.

Thermally balanced and precision grinded

super rigidity box way design.

Super r igidity crossrai l struc ture with

W-axis travel of 800 mm.

Table load capacity is up to 8,000 kg.

One-piece bed and column casting with precision hand scrapped provides structural rigidity

and load distribution.

X / Z axes use roller type linear guide ways which provides super rigidity and fast movement.

The rear-exit chip conveyor provides excellent chip removal efficiency and improves floor

space usage.

The cutting time is 50% shorter when using the GOODWAY dual-face turning holders. ( Opt. )

Powerful 37 kW motor delivers maximum gear type

spindle torque output of 2,817 N-m ( Opt. )

8 / 12 s tat ion ser vo tur ret ; opt ional 12-stat ion

l ive tooling turret is available with C-axis control

capabilities to become multi-tasking machine.

LH-75RHIGH PERFORMANCE HORIZONTAL MACHINING CENTER

All axes use high speed linear guide ways to offer super rigidity and superior acceleration /

deceleration performance.

CNC 0.001º indexing table equipped with worm gear system provides high accuracy

simultaneous machining capabilities, mostly use of spiral machining, and aerospace industry.

All series are standard with spindle oil chiller system to eliminate thermal deformation and

ensure high accuracy and long lasting.

All series are equipped with efficient arm type 24 tool ATC system which provides smooth

tool changing without delay. ( T-T : 2 second )

Model

X / Y / Z axes travel 700 / 660 / 625 mm

Distance from spindle nose to table center 122 ~ 747 mm

B-axis rotary table 500 x 500 mm

Table load capacity 500 kg

Min. table indexing 0.001o





Tool magazine Arm type


NC control FANUC Oi -MD


LH-75R


40771 No.38, Keyuan Rd., Central Taiwan Science Park, Taichung, TaiwanTEL : +886-4-2463-6000FAX : +886-4-2463-9600 www.GOODWAYCNC.com

www.AWEA.com

www.EXTRON.com.tw

40771 No.15, Keyuan 2nd Rd., Central Taiwan Science Park, Taichung, TaiwanTEL : +886-4-2462-9698FAX : +886-4-2462-8002

40755 No.8, 9th Rd., Taichung Industrial Park, Taichung, TaiwanTEL : +886-4-2359-3351FAX : +886-4-2359-0012

GOODWAY MACHINE CORP.

AWEA MECHANTRONIC CO., LTD

YIH CHUAN MACHINERY INDUSTRY CO., LTD.

GOODWAY MACHINE TOOLS GROUP

GOODWAY HEADQUARTERS

AWEA HEADQUARTERSAWEA SHANHAI BRANCHYAMA SEIKI USA, INC.

GOODWAY GROUP CHIAYI BRANCHGOODWAY GROUP WUJIANG BRANCH

GOODWAY CTSP BRANCH AWEA CTSP BRANCH

GOODWAY GROUP DONGGUAN OFFICE

YIH CHUAN HEADQUARTERS

HD-3012 - EXTRON \| CNC

Documents

Transcript of HD-3012 - EXTRON \| CNC