Hc Selections

8/16/2019 Hc Selections

1/24

Customer: Date: 2/29/2016Contact: From:Telephone: Company:Cell: Return Tel:

Fax: Return Fax:Job:Quote #:

Thank you for the opportunity to quote on your coil requirements. This quotation is subject to acceptance within 30 days fromdate of quotation. Prices will remain firm providing coils are released for production for the earliest possible shipment within 60days from date of order placement.

Terms of Payment: Net 30 Days

Delivery Terms: FOB FACTORY, FREIGHT ALLOWEDvia the lowest cost common carrier within the continental U.S.A.. Accessory charges and freight for stock coils are NOTINCLUDED and will be billed separately. PLEASE INCLUDE A COPY OF THIS QUOTATION WITH YOUR PURCHASEORDER.

Our current lead time, following order release : 5-6 Weeks

Item Qty Model FH x FL ApproxWgt App licat ionNet Each

(US $)Total(US $)

HC-AHU 4 2 5MH1102A 48.00 x 96.00 (IN) 243.4 (lbm) Fluid $1,334 $2,668

Tubing: 5/8 x 0.020 Copper One Tube Support ProvidedFin: 0.0075 Aluminum Left HandCasing: Galvanized-FlangedConnection: (1) 2.000-MPT-Carbon Steel

HC-AHU 20 2 5MH1002B 55.50 x 120.0 (IN) 321.4 (lbm) Fluid $1,679 $3,358Tubing: 5/8 x 0.020 Copper Two Tube Supports ProvidedFin: 0.0075 Aluminum Left HandCasing: Galvanized-FlangedConnection: (1) 2.500-MPT-Carbon Steel



HC-AHU 23 2 5MH1002B 69.00 x 120.0 (IN) 388.2 (lbm) Fluid $1,995 $3,990Tubing: 5/8 x 0.020 Copper Two Tube Supports ProvidedFin: 0.0075 Aluminum Left HandCasing: Galvanized-Flanged

HEATCRAFT PRICE QUOTATION7.05.44.1 1/1/2016

Mafna_01_2016


2/24

Casing: Galvanized-FlangedConnection: (1) 2.500-MPT-Carbon Steel




HC-AHU 32 2 5MH1002B 63.00 x 120.0 (IN) 358.5 (lbm) Fluid $1,854 $3,708Tubing: 5/8 x 0.020 Copper Two Tube Supports ProvidedFin: 0.0075 Aluminum Left Hand

Casing: Galvanized-FlangedConnection: (1) 2.500-MPT-Carbon Steel

Total (US $) : 38,346

HEATCRAFT PRICE QUOTATION7.05.44.1 1/1/2016

Mafna_01_2016


3/24



Construction Air SideItem: HC-AHU 4 Air Flow (Sft^3/min) 27132.0Coils Per Bank: 2 Altitude FT: 0.00

Allow Opp. End: No Ent. Air DB °F: 3.92Tube OD IN: 5/8 Lvg. Air DB °F: 55.00Coil Duty: Heat-Return Bend Total Capacity MBH: 0.00Fins Per Inch: 11 Max Air PD "H2O: 0.00Rows: 2 Fin Fouling Factor ft^2-°F-hr/BTU: 0Fin Surface: Optimize ABCFin Height (IN): 48.00 Fluid SideFinned Length (IN): 96.00 Fluid Type: PropyleneTubing Mat. (IN): 0.020 Copper Percent Glycol: 40TurboSpirals: No Ent. Fluid : 125.0Fin Mat. (IN): 0.0075 Aluminum Lvg. Fluid : 95.00Conn Qty/Size (IN): 1 / Optimize Fluid Flow gal/min: 0.00Circuiting: Optimize Max FPD FT H2O: 18.00Face Area (SQ FT): 64.00 Fouling Factor ft^2-°F-hr/BTU: 0

O U T P U T D A T A O P T I O N S

Model Number: 5MH1102A Casing Material: Galvanized Air Velocity: (Sft/min) 423.9 Casing Type: FlangedTotal Capacity: MBH 1486.8 Hand: LeftLvg. Air DB: °F 54.45 Connection Material: Carbon SteelStandard APD "H2O 0.11 Connection Type: MPTLvg. Fluid: °F 95.32 Vent/Drain: .50 FPT on FaceFluid Flow: gal/min 108.0 Label Kit: NoFluid PD: FT H2O 8.05 Coating: NoneFluid Vel.: ft/s 3.60 Mounting Holes: NoConn Size: IN (1) 2.000 Drain Headers: NoInternal Volume: in^3 2350.4 Boxed Headers: NoWeight (Dry): lbm 243.4Weight (w/Fluid): lbm 331.8Notes: BCEGLPrice Each: $ 1 334

HEATCRAFT FLUID SELECTION7.05.44.1 1/1/2016

Mafna_01_2016


4/24




Allow Opp. End: No Ent. Air DB °F: 3.92Tube OD IN: 5/8 Lvg. Air DB °F: 55.00Coil Duty: Heat-Return Bend Total Capacity MBH: 0.00Fins Per Inch: Optimize Max Air PD "H2O: 0.00Rows: Optimize Fin Fouling Factor ft^2-°F-hr/BTU: 0Fin Surface: Optimize ABCFin Height (IN): 55.50 Fluid SideFinned Length (IN): 120.0 Fluid Type: PropyleneTubing Mat. (IN): 0.020 Copper Percent Glycol: 40TurboSpirals: No Ent. Fluid : 125.0Fin Mat. (IN): 0.0075 Aluminum Lvg. Fluid : 95.00Conn Qty/Size (IN): 1 / Optimize Fluid Flow gal/min: 0.00Circuiting: Optimize Max FPD FT H2O: 20.00Face Area (SQ FT): 92.50 Fouling Factor ft^2-°F-hr/BTU: 0


Model Number: 5MH1002B Casing Material: Galvanized Air Velocity: (Sft/min) 421.8 Casing Type: FlangedTotal Capacity: MBH 2186.3 Hand: LeftLvg. Air DB: °F 55.58 Connection Material: Carbon SteelStandard APD "H2O 0.13 Connection Type: MPTLvg. Fluid: °F 94.66 Vent/Drain: .50 FPT on FaceFluid Flow: gal/min 155.4 Label Kit: NoFluid PD: FT H2O 11.91 Coating: NoneFluid Vel.: ft/s 4.36 Mounting Holes: NoConn Size: IN (1) 2.500 Drain Headers: NoInternal Volume: in^3 3348.3 Boxed Headers: NoWeight (Dry): lbm 321.4Weight (w/Fluid): lbm 447.9Notes: BCELPrice Each: $ 1 679


Mafna_01_2016


5/24




Allow Opp. End: No Ent. Air DB °F: 3.92Tube OD IN: 5/8 Lvg. Air DB °F: 0.00Coil Duty: Heat-Return Bend Total Capacity MBH: 2158.0Fins Per Inch: Optimize Max Air PD "H2O: 0.00Rows: Optimize Fin Fouling Factor ft^2-°F-hr/BTU: 0Fin Surface: Optimize ABCFin Height (IN): 55.50 Fluid SideFinned Length (IN): 120.0 Fluid Type: PropyleneTubing Mat. (IN): 0.020 Copper Percent Glycol: 40TurboSpirals: No Ent. Fluid : 125.0Fin Mat. (IN): 0.0075 Aluminum Lvg. Fluid : 95.00Conn Qty/Size (IN): 1 / Optimize Fluid Flow gal/min: 0.00Circuiting: Optimize Max FPD FT H2O: 0.00Face Area (SQ FT): 92.50 Fouling Factor ft^2-°F-hr/BTU: 0




Mafna_01_2016


6/24






Model Number: 5MH1002B Casing Material: Galvanized Air Velocity: (Sft/min) 422.0 Casing Type: FlangedTotal Capacity: MBH 2727.3 Hand: LeftLvg. Air DB: °F 55.74 Connection Material: Carbon SteelStandard APD "H2O 0.13 Connection Type: MPTLvg. Fluid: °F 94.56 Vent/Drain: .50 FPT on FaceFluid Flow: gal/min 193.2 Label Kit: NoFluid PD: FT H2O 13.62 Coating: NoneFluid Vel.: ft/s 4.48 Mounting Holes: NoConn Size: IN (1) 2.500 Drain Headers: NoInternal Volume: in^3 4155.4 Boxed Headers: NoWeight (Dry): lbm 388.2Weight (w/Fluid): lbm 545.3Notes: BCEILPrice Each: $ 1 995


Mafna_01_2016


7/24






Model Number: 5MH1002B Casing Material: Galvanized Air Velocity: (Sft/min) 422.0 Casing Type: FlangedTotal Capacity: MBH 2726.2 Hand: LeftLvg. Air DB: °F 55.72 Connection Material: Carbon SteelStandard APD "H2O 0.13 Connection Type: MPTLvg. Fluid: °F 94.53 Vent/Drain: .50 FPT on FaceFluid Flow: gal/min 192.9 Label Kit: NoFluid PD: FT H2O 13.58 Coating: NoneFluid Vel.: ft/s 4.47 Mounting Holes: NoConn Size: IN (1) 2.500 Drain Headers: NoInternal Volume: in^3 4155.4 Boxed Headers: NoWeight (Dry): lbm 388.2Weight (w/Fluid): lbm 545.3Notes: BCEILPrice Each: $ 1 995


Mafna_01_2016


8/24








Mafna_01_2016


9/24








Mafna_01_2016


10/24








Mafna_01_2016


11/24








Mafna_01_2016


12/24








Mafna_01_2016


13/24








Mafna_01_2016

7 05 44 1 1/1/2016


14/24

96.00 (FL)

48.00 (FH)

1.50 (R) 1.50 (T)

1.50 (S1)

1.50 (S2)

51.00 (H)

99.00 (L)

AIR FLOW

5MH1102A 48.00 x 96.00HC-AHU 4GENERAL NOTES & USER NOTES:

1. All dimensions are in (IN)2. Manually verifying dimensions is highly recommended.3. One intermediate tube support fabricated from stock of the same material as the casing will be provided.4. The supply line should be connected to the lower connection on the leaving air side for counterflow operation.5. Coils will vent and drain through factory-installed vent and drain fittings when mounted level for horizontal flow.6. Connection location other than standard could affect vent and drain locations. Consult factory.

USER NOTES:

S UP P L Y

RE T URN

3.00 (J)

2.38 (B)

2.38 (A)

2.51 (C)

2.51 (E)

5.00 (M)

7.50 (W)

LEFT HANDFLANGED CASING

2.00 (N)

103.00 (I)

HEATCRAFT SCALED DRAWING7.05.44.1 1/1/2016

Mafna_01_2016

Copyright 2003 Luvata Grenada LLC Confidential and Proprietary. This design is for the exclusive and confidential use of Luvata Grenada LLC and its client. Any duplication made for the purpose of disclosing this design or any part of the design to a competitor of Luvata Grenada LLC is in direct violation of this confidentiality. Any duplication must be approved in writing by Luvata GrenadaLLC.

Page 17

7 05 44 1 1/1/2016


15/24

120.00 (FL)

55.50 (FH)

1.50 (R) 1.50 (T)

1.50 (S1)

1.50 (S2)

58.50 (H)

123.00 (L)

AIR FLOW

5MH1002B 55.50 x 120.00HC-AHU 20GENERAL NOTES & USER NOTES:

1. All dimensions are in (IN)2. Manually verifying dimensions is highly recommended.3. Two intermediate tube supports fabricated from stock of the same material as the casing will be provided.4. The supply line should be connected to the lower connection on the leaving air side for counterflow operation.5. Coils will vent and drain through factory-installed vent and drain fittings when mounted level for horizontal flow.6. Connection location other than standard could affect vent and drain locations. Consult factory.

USER NOTES:

S UP P L Y

RE T URN

3.00 (J)

2.25 (B)

2.25 (A)

2.75 (C)

2.75 (E)

5.25 (M)

7.50 (W)


2.00 (N)

127.25 (I)


Mafna_01_2016


Page 18

7 05 44 1 1/1/2016


16/24

120.00 (FL)

55.50 (FH)

1.50 (R) 1.50 (T)

1.50 (S1)

1.50 (S2)

58.50 (H)

123.00 (L)

AIR FLOW



USER NOTES:

S UP P L Y

RE T URN

3.00 (J)

2.25 (B)

2.25 (A)

2.75 (C)

2.75 (E)

5.25 (M)

7.50 (W)


2.00 (N)

127.25 (I)


Mafna_01_2016


Page 19

7.05.44.1 1/1/2016


17/24

120.00 (FL)

69.00 (FH)

1.50 (R) 1.50 (T)

1.50 (S1)

1.50 (S2)

72.00 (H)

123.00 (L)

AIR FLOW



USER NOTES:

S UP P L Y

RE T URN

3.00 (J)

2.25 (B)

2.25 (A)

2.75 (C)

2.75 (E)

5.25 (M)

7.50 (W)


2.00 (N)

127.25 (I)


Mafna_01_2016


Page 20

7.05.44.1 1/1/2016


18/24

120.00 (FL)

69.00 (FH)

1.50 (R) 1.50 (T)

1.50 (S1)

1.50 (S2)

72.00 (H)

123.00 (L)

AIR FLOW



USER NOTES:

S UP P L Y

RE T URN

3.00 (J)

2.25 (B)

2.25 (A)

2.75 (C)

2.75 (E)

5.25 (M)

7.50 (W)


2.00 (N)

127.25 (I)

HEATCRAFT SCALED DRAWING Mafna_01_2016


Page 21

7.05.44.1 1/1/2016


19/24

120.00 (FL)

54.00 (FH)

1.50 (R) 1.50 (T)

1.50 (S1)

1.50 (S2)

57.00 (H)

123.00 (L)

AIR FLOW



USER NOTES:

S UP P L Y

RE T URN

3.00 (J)

2.25 (B)

2.25 (A)

2.75 (C)

2.75 (E)

5.25 (M)

7.50 (W)


2.00 (N)

127.25 (I)



Page 22

7.05.44.1 1/1/2016


20/24

120.00 (FL)

54.00 (FH)

1.50 (R) 1.50 (T)

1.50 (S1)

1.50 (S2)

57.00 (H)

123.00 (L)

AIR FLOW



USER NOTES:

S UP P L Y

RE T URN

3.00 (J)

2.25 (B)

2.25 (A)

2.75 (C)

2.75 (E)

5.25 (M)

7.50 (W)


2.00 (N)

127.25 (I)



Page 23


M f 01 2016


21/24

120.00 (FL)

54.00 (FH)

1.50 (R) 1.50 (T)

1.50 (S1)

1.50 (S2)

57.00 (H)

123.00 (L)

AIR FLOW



USER NOTES:

S UP P L Y

RE T URN

3.00 (J)

2.25 (B)

2.25 (A)

2.75 (C)

2.75 (E)

5.25 (M)

7.50 (W)


2.00 (N)

127.25 (I)



Page 24


Mafna 01 2016


22/24

120.00 (FL)

63.00 (FH)

1.50 (R) 1.50 (T)

1.50 (S1)

1.50 (S2)

66.00 (H)

123.00 (L)

AIR FLOW



USER NOTES:

S UP P L Y

RE T URN

3.00 (J)

2.25 (B)

2.25 (A)

2.75 (C)

2.75 (E)

5.25 (M)

7.50 (W)


2.00 (N)

127.25 (I)



Page 25


Mafna 01 2016


23/24

120.00 (FL)

63.00 (FH)

1.50 (R) 1.50 (T)

1.50 (S1)

1.50 (S2)

66.00 (H)

123.00 (L)

AIR FLOW



USER NOTES:

S UP P L Y

RE T URN

3.00 (J)

2.25 (B)

2.25 (A)

2.75 (C)

2.75 (E)

5.25 (M)

7.50 (W)


2.00 (N)

127.25 (I)



Page 26


Mafna 01 2016


24/24

120.00 (FL)

63.00 (FH)

1.50 (R) 1.50 (T)

1.50 (S1)

1.50 (S2)

66.00 (H)

123.00 (L)

AIR FLOW



USER NOTES:

S UP P L Y

RE T URN

3.00 (J)

2.25 (B)

2.25 (A)

2.75 (C)

2.75 (E)

5.25 (M)

7.50 (W)


2.00 (N)

127.25 (I)



Page 27

Hc Selections

Documents

Transcript of Hc Selections