Hawman ISO 9001:2008 Certified - · PDF file• wind, seismic, lifting lugs and ... ISO...

888-895-1449 www.hawman.com

HCS Group Manufacturing, Division of 872556 Ontario Inc.

HawmanContainer Services

ISO 9001:2008 Certified











Custom Fluid Handling Process Equipment







HISTORY

HCS GROUP ENGINEERING CAPABILITIES• API 650 tank design using AME tank design software c/w calculations:

• wind, seismic, lifting lugs and structural FEA c/w P.Eng. stamp for the province of installation

• Piping system design as per ASME code B31.3 or B31.1

• Concept - P&IDs, & piping components selection supporting documentation

• 3D Modeling, GA & BOM creation using Solid Works latest edition

• QA documentation submittals for approval c/w document Index

• Inspection & test plans, welder’s qualifications, procedures: Weld, NDE, Functional & Hydro Testing…etc.

• Provincial Registration - Piping Data Report c/w P.Eng stamped calculations – TSSA, ABSA …etc.

HCS GROUP MANUFACTURING CAPABILITIES• ISO 9001 - quality control – material traceability, ITPs

• ISO Z299 also available

• CWB certified welders - W47.1 – structural frames and tank supports

• AWS D1.1 certified procedures also available

• TSSA Certified Shop – ASME section VIII, division 1 & CSA B51

• NDE & PWHT as required c/w weld & NDE mapping

• Third party NDE: RT, UT, visual, mag particle & PMI

• Project management, start-up assistance & on-site training

Hawman Container Services was founded in the late 70’s as a service and refurbishing facility of barils and intermediate bulk containers (IBCs) based out of Barrie ON.

Over the years the company has experienced tremendous growth by developing its own line of standard products. Our off the shelf, UN approved, IBC containers product line represents our standard offering, having our own Polyethylene Rotomolding division capable of building 40 IBC’s per day from raw materials to a completely finished product.

Being 100% Canadian family owned and operated the company has continued to expand its fabrication capabilities with significant expansions in equipment and facilities therefore creating the HCS Group Manufacturing business unit.

Our exposure to a variety of industries over the past 30 years has allowed us to expand into custom fabricated process equipment supply such as API 650 & 12F tanks, CWB structural frames & platforms as well as ASME registered pressure piping and turnkey fluid handling systems.

API MEMBER COMPANY


TURNKEY MODULAR FLUID HANDLING STATIONHISTORY

APPLICATION: ALBERTA O&G – SAGD WELLHEAD CHEMICAL INJECTION

100BBL (16000L) - API 12F TANK• 304SS construction• PVRV & EPRV as per API 2000• 30” manway & ladder• AME tank calculations - wind, seismic…etc. 110% CONTAINMENT – AB DIRECTIVE 55 • 12’x28’x2’H - designed for installation on 4 piles • CS construction - 24” I beams perimeter• Envirobox - truck loading station• ABC compliant c/w FEA & P.Eng stamps

PUMPING EQUIPMENT ENCLOSURE• 6’x8’x8“H c/w dual doors and manual louvre • CS frame, insulation & vic west cladding• Internal heaters c/w thermostat - C1D2• ABC & NBC compliant c/w P.Eng stamps

HCS GROUP BARRIE, ONTARIO

Analyzed with SOLIDWORKS Simulation Simulation of 13520-T1M85-X-850-100A 1

Simulation of 13520-T1M85-X-850-100A Date: Wednesday, August 03, 2016 Designer: H.A. Study name: Static 2 Analysis type: Static

Table of Contents Description ............................................ 1 Assumptions .......................................... 2

Model Information ................................... 2 Study Properties ..................................... 9 Units ................................................... 9

Material Properties ................................ 10 Loads and Fixtures................................. 12

Connector Definitions ............................. 13 Contact Information ............................... 13

Mesh information .................................. 14 Sensor Details ...................................... 15 Resultant Forces ................................... 15

Beams ................................................ 16 Study Results ....................................... 21

Conclusion .......................................... 21

Description Simulated static analysis of support structure weldment with storage tank at full capacity and all necessary equipment mounted. Husky Doc No: SNRS-ZZ-T1M85-EN-VP-85-004-1 Document Title: DA2-STRUCTURAL DESIGN Prominent PFC No: 3115800474

HCS Group Barrie, Ontario

H.A. 8/4/2016

Analyzed with SOLIDWORKS Simulation Simulation of 13520-T1M85-X-850-101 11

Beams No Data

Study Results Name Type Min Max Displacement1 URES: Resultant Displacement 0 in

Node: 327 0.00177395 in Node: 10520

13520-T1M85-X-850-101-Static 2-Displacement-Displacement1







PRESSURE VESSELS

ACTIVATED CARBON VESSEL

• ASME design – 180psi @ 200° F• TSSA registration c/w ON P.Eng. stamps & CRN• Shell – 48” OD x 72”str side x 0.375” wall• 304 & 316SS Construction• 24” manway c/w davit• Internal diffuser hub c/w wedge wire screens


API 650 TANKS

APPLICATION: REAGENT MAKE DOWN SYSTEM – GOLD MINING

• API 650 stacked tanks• Internally reinforced bottom tank to support upper tank & mixer







API 650 TANKS

APPLICATION: REAGENT INJECTION – ALBERTA O&G – SAGD

• 304SS API 650 tanks • Wind, seismic, lifting lugs and structural FEA c/w AB P.Eng. stamp


API 650 TANKS

APPLICATION: REAGENT INJECTION – ALBERTA O&G – SAGD

• 304SS API 650 tanks EHT, insulated & cladded• Wind, seismic, lifting lugs and structural FEA c/w AB P.Eng. stamp

APPLICATION: MOLTEN SULPHUR & BENTONITE SLURRY MIXING

• Two API 650 CS jacketed tanks • Three leg design to suit load cell level monitoring







TURNKEY PUMPING SYSTEMS

APPLICATION: MINING & O&G API PUMPING SYSTEMS

• 316SS Piping Systems – ASME B31.3 • CRNs c/w provincial registration


ASME PRESSURE PIPING

APPLICATION: O&G - PIPING SPOOLS

• 316SS Piping Spools – ASME B31.3 • CRNs c/w provincial registration

APPLICATION: VARIOUS STRUCTURAL SUPPORTS

• CS & SS – CWB W47.1 Structural Supports Frames• P.Eng Stamped Structural Calculations• Lifting Lugs rated for -45°C – Cat 4 material Charpy impact tested• NDE – 100% Magnetic Particle Testing

STRUCTURAL FRAMES







VARIOUS CUSTOM PROCESS EQUIPMENT

40” INLINE MIXING VESSEL

RESIN TRAPS

LIME SLURRY SS CONICAL BOTTOM MIX TANK

SS TRUCK UNLOADING STATION C/W SPILL CONTAINMENT

SS SUPPLY TOTE & AODD TRANSFER PUMP ASSEMBLY


FACILITIES - BARRIE ON CANADAVARIOUS CUSTOM PROCESS EQUIPMENT

THREE LOCATIONS >120K SQ.FT. MANUFACTURING SPACE• 181 Big Bay Point Rd. – Head Office/Main Plant – CS Fabrication• 87 Welham Rd. – Large Projects & SS Fabrication c/w full segregation• 354 Tiffin St. – Sand Blasting, Painting and Finishing facility MATERIAL PROCESSING EQUIPMENT• Qty 3 - CNC water jet/laser tables up to 6’x12’

• Water jet capable of handling up to any 8” material• Several 175 ton press brakes• 4’ x 4’ CNC plasma cutting table, 3/4” thk. max• 10’ shear, 1/4” thk• Multiple TIG & Mig welders • Three pipe positioners – 40” max diameter • Fully equipped machine shop• Several horizontal band saws• 50 & 70 ton iron workers• All equipment calibration certificates available upon request MATERIAL HANDLING• Qty 2 – 10 ton overhead cranes - 60 ft. span & 47’ under the hook• Qty 3 - 10ton tank rollers• Qty 1 – 14” pyramid roller• Qty 3 – 3000lbs pipe manipulators• Qty 2 – 14’x14’ weld manipulators PAINTING AND BLASTING• 25’x 25’ fully contained and ventilated sand blasting facility with dual stations• Large metal shock blaster• 12’ x 25’ & 12’x 12’ spray booths

API MEMBER COMPANY

WORLDWIDE SERVICEOur customer base is virtually every country on the globe and our transportation co-ordinator can deliver our goods to any location whether it is easily accessible or remote.

GOALOur goal as a company is to offer the most comprehensive product line in our industry and to specialize at developing packaging solutions for the most difficult packaging problems our customers may present.

LOCATIONSWe have over 120,000 square feet of manufacturing space at 3 locations in Barrie Ontario and manufacture most of the components and sub-components for our products in house. Our in house capabilities allow us to offer the shortest lead times in the industry and often we are able to ship directly from stock.














Hawman ISO 9001:2008 Certified - · PDF file• wind, seismic, lifting lugs and ... ISO...

Documents

Transcript of Hawman ISO 9001:2008 Certified - · PDF file• wind, seismic, lifting lugs and ... ISO...