Hawkes Software• You have two options here: ∙ Purchase the boxed software at the bookstore ∙ Download this software from the Hawkes website

Downloading it is the recommended procedure.

• Good news: The second option is the cheapest since the downloaded software is free. But you still have to purchase a 30-character access code (see next slide).

Hawkes Software• Bad news: With both options, in order to run the

software, you will need to purchase a 30-character code from Hawkes

• With the first option, your code will be supplied by Hawkes using information inside the box

• With the download option, you can purchase this code online with Hawkes using a credit card

• This 30-character ID is your encrypted name• As a result, you cannot use someone else’s code

Obtaining Your 30-Character Hawkes Code

• You will need to purchase your 30-character code from Hawkes at

www.hawkeslearning.com

• The next two slides illustrate how to purchase your code

Click here

Click here if you purchased the Hawkes box at the bookstore

Click here if you downloaded the

software

If You Clicked on “Get Your Access Code”

Select University of North Texas – Denton as the School. Then click on

Continue.

If You Clicked on “Purchase Your Access Code”

Select Statistics

Purchasing Your Hawkes Code

• After clicking on the Next button, you will be prompted for your name, email address, and credit card information

• Be sure to enter your name as it appears on my class roll

• No nick-names or newly married names

Save Your Access Code

• You will need your access code frequently! • Save your access code on a flash drive or on

your computer’s hard drive.

Downloading the Hawkes Software

• The address is www.hawkeslearning.com• The next four slides will show you how to

download the software• Remember: This download is free but the

software will not run until you purchase your 30-character code

• Details of how to purchase your code are contained in the course syllabus

Click on “Download the Software”

Select this option

Click on the PC or Mac Install

PC install

Mac install

Downloading the Hawkes Software

Click on “Run”

During the install, you will be asked for a course ID.It is UNTBSTAT.

Downloading the Hawkes Software

Click on “Run”

Running the Hawkes Software

• Using any of the three Hawkes options described previously, you should see this icon on your desktop after the installation

• Double click it to run the Hawkes software• You will then be prompted for your 30-character code

as shown on the next slide

Subsequently, click on this and locate the access code file on your flash drive or

computer hard drive.

If this is the first time, enter your 30-character code. When

prompted, save it on your flash drive or computer hard drive. The

default file name is access.cod.

Completing the Hawkes Modules

• Double click the Hawkes desktop icon• Enter your 30-character Hawkes code• Select the module you wish to complete as

illustrated on the next slide• You can do this module as many times as

necessary• There is no penalty for repeat attempts to

certify – just get it completed by the due date

Select Chapter, Lesson

NOTE: The Hawkes Chapters do not match the chapters in our textbook since Hawkes is used by many universities with many different textbooks.

Select any of these buttons.To successfully complete a

module, you must eventually click on the Certify button.

A Sample Question

You get to make this number of mistakesTotal number of

questions in this module

Click on this to submit your answer

Successfully Completing a Module

• If you complete a module in the allotted number of strikes, the Hawkes software will certify this module as having been successfully completed

• You receive full credit for all modules completed on time

• Modules completed after the due date receive half credit

• To check the status of your module completion and Excel quizzes, click on the Progress Report button, shown on the next slide

Click on this to see your Progress Report

First, enter your access code

The Progress Report

This column indicates that modules 1.2, 3.1, and 3.3 were completed on time (T)