Harness ProductionCables & Cable Processing Systems

Industrial ConnectorsControl Products

CasesHeatsinks

Board Level Connectors

ELECTROMECHANICALSOLUTIONS

www.microdis.net

HarnessProducti on

Measure and cut to lengthFull or parti al strip both sides Crimp to crimpTwist and ti n to crimp

Cutti ng and stripping from AWG32 (0.05mm2) up to AWG8 (8.00mm2)

Harness with all typical connectors in half or full automati c process

Harness with RAST connectors (Lear, Lumberg) or other IDC connectorsin half automati c process

Special connectors hand soldering (D-Sub, industrial etc.)Lead free ti n plati ngPull-out force and crimp height measuringQuality controlPull-out force and crimp height measuring

2

Applicators and PressesFully mechanical applicators (with or without pneumati c support) for all standard contactsApplicators for RAST connectors and other special typesApplicators for terminals packed in tubesApplicators with 30 and 40mm stroke, in European (standard) or Asian (special) coupling Two-post dies for big cross secti on loose contactsMechanical presses with crimping force from 1.5 to 200 tons

Pneumati c and hydraulic presses with dedicated dies

CableProcessingSystem

Machines for:Benchtop crimping & stripping

Cutti ng to length and strippingCutti ng

Full process crimpingMarking

MiniLabs for micrography of crimping qualityPulltester

3

Interconnecting wires and flexible leadsInsulation: PVC/PE/TPE/Silicone/PP/PA Tefzel/Teflon/PUR/Glass filament/EVA etc.

Temperature range: -200 to 1200C halogen-free/flame resistant/lead freeVDE/UL/CSA/MIL approvals, DIN standards

Single, multiple, fine, ultra-fine wire / single, double, triple coloured

Cables

Ribbon cables and twin conductorsAll grid sizes / single & multi colouredSolid or Flexible – screened

Flat circular conductorsUL/CSA approval

Data and Communication TechnologyOptical fiber technology (patch cable / connection technology)Optical fiber cablesPlug-in connectors and systemsSplice boxesTrunk cablesCopper wiring systems

Data and Control Cables, Power cablesScreened / unscreenedInsulation: PVC/PE/PUR/Silicone/TeflonApprovals: UL/CSA/MIL/VDECustomer-specific manufacture from 500m

Accessories:Spiral cables (from 1 cable)Shrink tubingInsulation tubingCable testing systemsCable protection systems

*excluding Hungary and Slovenia4

More than 10’000 circular connectors known for their durability. Miniature, metal or plasti c shell cylindrical connectors with push-pull locking, sealed or not. Fischer Connectors also

does cable assembly and can develop a custom made soluti on for your device.

Circular Connectors

Circular connectorsMulti pole Low & High Voltage connectors

Coax Low & High Voltage connectorsTriax connectors

Fiber opti c connectorsFluid / Gas connectors

Hybrid connectorsTools and accessories

Serving all marketsFrom Medical to DefenseFrom Instrumentation to Food and more

FISCHERCORESERIES:

ANY SIZEANY CONFIGURATIONANY APPLICATION

FISCHERULTIMATETM

SERIES:

RUGGEDCOMPACTLIGHTWEIGHT

FISCHERMINIMAXTM

SERIES:

HIGH DENSITYSIGNAL & POWERMINIATURIZATION

FISCHERFIBEROPTICSERIES:

ROBUSTOPTICAL PERFORMANCEEASY CLEANING

Cable AssemblyRely on Fischer in-houseexpertise for cableassemblies, engineeredto your needs.

Custom SolutionsFrom initial concept troughprototyping, testing and installation,Fischer fi nds solution that suitsyour specifi c needs.

AccessoriesExplore Fischer full rangeof accessories for improvedconnector performanceor protection.

ToolsComplete your in-house toolsetwith spanners, crimp andassembly tools, and more.

5

CablingSoluti ons for Networks

Cabling soluti ons in the copper and fi ber opti c techniques for building and industrialcabling applicati ons

The growing demand for data transmission volumes requires an ever stronger performance and conti nuity of underlying data networks. Today, IT-technologies are used in a multi tude of

applicati ons in buildings, data centers and industrial plants. Anti cipatory and intelligent cabling systems that spanningly connect several segments must therefore match perfectly in order to

guarantee a sustainable, safe and conti nuous form of communicati ons.

All this is guaranteed by the Metz Connect range of P|Cabling products: highly specialized, internati o-nally standardized and high-performance connecti on components in copper and fi ber opti c technology

stand out by their quality and strong system compati bility.

E-DAT Industry RJ45 fi eld insert

E-DAT Industry RJ45 housing

C6A, RJ45 fi eld plug pro

Ethernet M12, 4-pole, D-codedreceptacle & overmolded cable

Building and industrial cabling, data communicati on

Offi ce fi ber opti cOffi ce RJ45Industry fi ber opti cIndustry RJ45Ethernet M12Industry unequippedhousingsData center soluti onsAssembled cablesAccessories

Intelligent networks –perfect connections

6

Innovate product systems – continuous connections

TerminalBlockConnectors

Automoti veConnectors

Spring clamp terminal blocksSolderable

PluggableCompression-mount

Suitable for solid wires and multi -stranded wiresNominal cross secti on of 0.08 - 2.5mm2

Centerline 2.5 - 10mmScrew-type terminal blocksSolderable

PluggableSingle poles

Suitable for solid wires and multi -stranded wiresCenterline 3.5 - 10.16mm

IDC type terminal blocksSolderable

Centerline 3.5 - 10.16mm

Advantages:• Complete range for diff erent installati on requirements• A variety of connecti ng technologies • Additi onal product designs (operati ng opti ons, mounti ng fl anges etc.)• Soluti ons for diff erent connecti on cross-secti ons• Color variants at customer request• Varying number of poles• Codeability• Customer-specifi c adaptati ons possible

Chain terminals 2.8 / 4.8 / 6.3 / 7.7 / 9.3mm Ring tongue and other solderless terminals and splices

Automoti ve connectorsRAST connectors

Automoti ve connectorsRAST connectors

Wire to PCB connectors PCB to PCB connectors

Wire to wire connectorsSolderless terminals and splices

Flat ribbon cablesControl cables

Stranded wires

7

ControlProducts

True freedom expressed in operati ng feelAlps Electric has been producing input devices ever

since its founding. Company adapts to the ti mes, de-veloping ever smaller, thinner products and responding

to needs for greater integrati on and multi functi onality. Maintaining elevated standards for operati ng feel, Alps Electric constantly pursues creati on

of the „right” products.

Products:Sensors - magneti c, geomagneti c, humidity,

pressure sensorsTACT Switches - snap-in types & surface mount types

Switches - detector, slide, push, rotary, power, dual in line types

Encoders – absolute & incremental typesPotenti ometers – rotary & slide types

Connectors - SD & Micro SD card holders, SIM, MicroSim& NanoSim card holders, combined types

Multi Control Devices – potenti ometer & switch types

Performance Engineered Control Products22mm Control Switches• Metal and plasti c bodied• 600V, 10A max AC• 10mln operati ons

Heavy Duty Footswitch• Single or double pole contacts• Snap acti on and slow acti on contact blocks• Normally open and normally closed blocks• Positi ve opening operati on• Silver contacts• Anti Slip foot pedal• Non-slip rubber feet• Supplied with cable gland • IP65 sealed

Populated Control Stati ons• Robust ABS populated control stati ons• Rated 600V, 10A max AC• Diff erent size opti ons

Piezoelectric Switches and Keypads• No moving parts• Operati ng life of 50 million operati ons• Resistant to environmental factors (IP68)• Robust and resistant to vandalism

8

Cases Performance EngineeredEnclosures

CamdenBoss has over 440 designs, sizes and styles of enclosures to sati sfy today’s compe-ti ti ve market, where functi onality, price, aestheti cs and ergonomics are all driving demands.

In additi on to extensive range of standard injecti on moulded, die-cast and sheet-metalenclosures, Camdenboss has manufacturing and assembly faciliti es enabling off ering bespoke

designed Tool-Free Custom-Design enclosures from fl at-sheet plasti c, full customisati on of stan-dard ranges and complete turnkey enclosure and assembly soluti ons.

Products:Universal Enclosures

Heavy Duty EnclosuresInterface Supports

Diecast & Metal BoxesPotti ng Boxes

19” SubracksHand Held cases

Din Rail BoxesControl Stati ons

Desktop & Instrument Cases19” Enclosures

CUSTOM DESIGNED ENCLOSURES

Custom Enclosures with Flat-Sheet Plasti c Technology - No Tooling!CamdenBoss develops and manufactures enclosuresto your specifi cati ons using Flat Sheet Plasti c Technology.Combining years of engineering experti se, precision machining & innovati ve assembly techniques; any con-cept can be manufactured to your exact size and spe-cifi cati on. CamdenBoss unique is ideally suited for low to medium batch quanti ti es – from the most simpleto the most complex of enclosures.

Advantages:Rapid Lead Times• 1 - 3 weeks prototyping• 3 - 4 weeks volume producti onsCreati ve - industrial designers, technical sales& CAD/CAM engineers at your disposalInexpensive - No Tooling Charge• Low design and set-up costs• Competi ti ve unit pricingAny Quanti ti es• From low batch runs of 5 to high volume• 5000+ producti on runsFlexible - make changes to the design quickly& easily aft er prototyping or aft er producti on

9

Cases& Heatsinks Thermal management

Machined extruded heatsinksExtruded heatsinks with solder pin

Heatsinks and fan coolers for processorsLamella heatsinks

Finger shaped and small heatsinksCooling aggregates

Thermal interface materials

Cases

Miniature aluminium casesDesign casesCombination cases and tube casesDesk consoles and shell cases19” System cases19” Subracks19” Plug-in boxes19” Insert modules

ServicesPrecision Machining

Fischer Elektronik offers a wide range of processing options, especially for deco-rative applications. All standard cooling heatsinks and cases and also special front

and cover plates can be manufactured to suit customers’ requirements in terms of decorative design.

CNC machining centres and automatic machines are used to ensure optimum processing quality. Components receive mechanical surface treatment in preparation for anodizing or galvanic coating such as chromium or gold, consisting of sandblasting, grinding and polishing.

Powder Coating For the safe use of electronic casings under difficult ambient conditions where anodized or painted casing surfaces are no longer sufficient, first-class surface coating is required.In addition to its standard product range, Fischer Elektronik offers robust and invulnerable powder coatings. In addition to colour and structural options for individual surface designs, powder coatings offer excellent resistance to scratches, abrasion and shocks and provide outstanding protection against corrosion and chemicals as well as good electrical insulation. Other important features include a long service life, high light fastness and a base material which is environmentally friendly, as the powder contains neither heavy metals nor solvents.

Screen printing & Laser letteringFor optical identification of milling Fischer use screen printing or YAG-lasers. Espacially laser inscriptions are of outstanding quality and ensure good, permanent legibility, even in the case of letter sizes below 1mm and under the influence of solvents.

10

PCB Level Connectors G TC

Global Connector Technology

SIM card connectors HingedPush-pushRetainerDual SIMSIM + uSD combo

HingedPush-pushPush-pull

Memory SD & uSDcard connectors Micro USB

Mini USBFull size USBA, B, AB types available

USB 2.0 & 3.0 connectors Modular Jack connectors4-8 positi ons4-8 positi ons loadedRight angle or verti calTHT or SMD style

Flat Flex Cable (FFC) - Contacts on opposite sides (Type D)

FFC2B15 -Top Contact FFC2B05 -

Top Contact

FFC2B05 -Top Contact

Flat Flex Cable (FFC) - Contacts on the same sides (Type A)

FlexiblePrinted Circuitry(FPC)

FFC2A30Verti cal EntryLeft Contact

FFC2B25Flip LockBott om Contact

FFC cableavailable

from GCT in0.5/1.00 mm

pitches

0.3, 0.5, 1.0mm pitchSide or top entryTop or bott om contactSide or fi lp lock

FFC connectors & cables

0.8, 1.0, 1.27, 2.0, 2.54mm pitchHeaders, elevated headers,sockets, elevated socketsHorizontal, parallel, perpendicularTHT or SMD style

Board-to-board connectors

DC Power JacksTHT and SMD0.65mm, 2.00mm, 2.35mm & 2.50mm center pin diameters

Current rati ngs from 1.5A to 8.0AShielded variati ons in both straight and right angle orientati on

PCB connectors - male and female headers, contact stripsIDC connectors male & female headers, one & two rowsD-SUB connectors

Board to Board Connectors:• Centerline 1.27, 2.00, 2.54mm• SMD & THT

RJ45 & RJ11, RJ12 Jacks• THT & SMD versions• Shielded & unshielded• Single & multi port• With integrated magneti cs and/or LED indicators

USB Jacks• THT & SMD versions• Type A, B & microB

M12 Jacks• D coded or X coded types• 4 or 8 pins• THT or panel mounted• Sealing level up to IP68

DIL, PGA, PLCC, transistors socketsFlat ribbon cables

11

EN v.4.4

Microdis Electronics Sp. z o.o.Harness producti on facilitySuchy Dwór 1752-271 Wrocławinquiry@microdis.nettel. +48 71 3010400fax +48 71 3010404

Bulgaria@microdis.net

Croati a@microdis.net

Czech@microdis.net

Estonia@microdis.net

France@microdis.net

Hungary@microdis.net

Latvia@microdis.net

Lithuania@microdis.net

Poland@microdis.net

Romania@microdis.net

Russia@microdis.net

Serbia@microdis.net

Slovakia@microdis.net

Slovenia@microdis.net

Turkey@microdis.net

Ukraine@microdis.net

microdis.de@microdis.net

AAEON Industrial computers and panels www.aaeon.comAEGID RFID systems and transponders www.aegid.deALPS ELECTRIC Switches, encoders, potenti ometers and printers www.alps.comAMBER WIRELESS RF ISM, Bluetooth, ZigBee modules and transceivers www.amber-wireless.deASROCK Mini-ITX industrial boards www.asrock.comBRIGHTEK Power, THT and chip LEDs and LED modules www.brightekeurope.comCAMDENBOSS Interconnect components, electronic housings, 19” cabinets www.camdenboss.comEPSON Crystals, oscillators, fi lters and sensors www.epsontoyocom.co.jpFISCHER CONNECTORS Military, medical and industrial connectors www.fi scherconnectors.comFISCHER ELEKTRONIK Heatsinks, connectors, 19’’ and case technology www.fi scherelektronik.deGLOBAL CONNECTOR TECHNOLOGY SIM-Holders, memory card connectors, USB connectors www.globalconnectortechnology.comIIYAMA Large Format Displays www.iiyama.comISOCOM Optocouplers, optoswitches www.isocom.comJST Signal connectors www.jst.deLEAR Automoti ve and white goods connectors www.lear.comMAXTENA GPS, Galileo, Glonass, Iridium antennas www.maxtena.comMECAL Machines and systems for wire crimping www.mecal.comMEDER Reed switches, sensors and relays www.meder.comMEDIKABEL UL/CSA/DIN certi fi ed, customized industrial cables www.medikabel.deMETZ CONNECT Terminal block connectors - screw, spring and pins www.metz-connect.comNEXCOM Industrial computers and panels www.nexcom.comSEOUL SEMICONDUCTOR LEDs - power, full color, 230AC www.seoulsemicon.comTAIWAN SEMICONDUCTOR Semiconductor devices www.taiwansemi.comU-BLOX GNSS, GSM, UMTS/HSPA/CDMA/LTE/NBIoT modules, WiFi, www.u-blox.com Bluetooth, NFC, V2V/V2X, antennas WEZAG Hand tools for crimping, pneumati c presses www.wezag.de

Currently the Microdis Group employs over 100 people, with a large number of electronic engineers, mostly involved in sales and marketi ng. As a company with an extensive experience in the distributi on of electronic components, and a purchasing center in Germany for many years, we are able to off er almost any product from a wide variety of electronic components. We off er also the producti on of cable harnesses and programming of crystal oscillators for a customised frequency. Cooperati on with a catalogue distributor provides fast deliveries (2 days) of a wide range of catalogue products.

We have certi fi cates of quality management DIN EN ISO 9001:2008 for the distributi on of electronic components.