Hanger Support

7/31/2019 Hanger Support

1/173


2/173

TABLE OF CONTENTS

INTRODUCTION TO GULF STATE HANGERS

GENERAL NOTES AND MATERIAL SOECIFICATIONSCUSTOM HANGERS AND FABRICATION

PLASTIC COATED ANDCOPPER COATED HANGERS

CONSTANT SUPPORTS

ENGINEERED HANGERS

SWAY BRACES, STRUTS, AND SUPPRESSORSABBREVIATIONS

GSH SPECIAL PRODUCTSGSH CATALOG NUMERICAL INDEX

HANGER CATALOG PAGES

CONDITIONS AND TERMS OF SALE

iv

ix-xiii

INSIDE BACK COVER

THRU NO. 289

FIG. NO. 1

viii

vii

vi

vi

vi

v

iii

page

ii


3/173

INTRODUCTION

GULF STATE HANGERS and Support Manufacturers, Inc.

"SPECIALISTS IN CUSTOM MADE STAINLESS STEEL HANGERS"

We have been manufacturing pipe hangers and custom designed supports since 1977. We do custom fabricationfrom most popular grades of construction materials. Over the years we have had the opportunity to assist manyof our customers in solving troublesome problems by fabricating custom hangers to fit their specific needs. Wecan customize standard products to fit your needs.

The employees and management of Gulf StateHangers would like to take this opportunity to thank ourcustomers for their inquiries and purchase orders over the past years. We take pride and pleasure in dedicatingthis catalog to our customers and future customers.

This is not just another catalog for looking up figure numbers to place an order for materials that no one

remembered to order. We have attempted to make this catalog a presentation of examples of the types of workthat Gulf State Hangers turns out. This catalog should make it easier for engineers and designers to selectsupports that meet their needs without being limited to selections available in other catalogs.

Gulf State Hangers takes pride in the fact that we go beyond the normal procedure of "business as usual". We tryto take an interest in seeing that our customers are satisfied in the quality of the product as well as the servicethey receive.

With that in mind Gulf State Hangers has instituted many changes in our sales, production, and managementprograms. We feel these changes will enable us to keep our prices intact and better serve our customers withoutreducing the quality of our products. Management reviews all inquiries from new customers. All orders fromcustomers that do not have Management credit approval will be C.O.D.

Our reputation rests with satisfied customers. We appreciate the opportunity to serve you. For additionalinformation about the company, or any of our products, or if you have a problem connected with pipe hangers orsteel fabrication, call us at (251) 653-6228, FAX (251)653-5356, or write Gulf State Hangers, P.O. Box 407,Theodore, AI. 36590.

The Management


4/173

GENERAL NOTES

CATALOG PAGE NUMBERING: We have a unique system of numbering the pages in this catalog. The itemFigure Number is the page number. An index is not required to find an item in this catalog if you know the GSHFigureNumber. We believe this page numbering system will be easier and faster than looking up the page number in anindex.

INDICES : Two indexes are inc luded in this catalog. Both are designed to be a cross reference between Gulf StateHangers figure numbers and Grinnell figure numbers. The index in the front of the catalog is in numerical order byGulf State Hangers figure numbers. The index in the back of the catalog is in numerical order by Grinnell figurenumbers.

SPECIFICATIONS: All catalog products meet the requirements of MSS SP-58. Custom fabricated products willmeet the specifications provided by the customer. Standard specifications are subject to change without notice.

UNITS OF MEASURE: In this catalog dimensions are in inches, and loads and weights are in pounds unlessotherwise noted. All weights are approximate.

MATERIALS:

Carbon Steel catalog items for general use are made from the following materials.

MATERIALITEM SPECIFICATION

Structural Shapes and Flat Bar ASTM A-36Plate, Rod, and Pins ASTM A-36Pipe ASTM A-53Bolts ASTM A-307 Grade ANuts ASTM A-563 Grade AForgings ASTM A-668 Grade C,

D or F

Alloy or stainless steel Catalog Items are made from the following materials unless otherwise specified in the order.

ITEM CHROME-MOLY STAINLESS STEELPlate ASTM A-387 Grade 11 or 22 A-240 Type 304Pipe ASTM A-335 Grade P11/P22 A-312 Type 304Rod 8z Pins ASTM A-322 Grade 4140 A-276 Type 304Bolts ASTM A-193 Grade B7 or B16 18-8 StainlessNuts ASTM-194 Grade 2H 18-8 Stainless

iv


5/173

CUSTOM WORK

ORDERING CUSTOM ITEMS - GulfStateHangers'quoted prices for custom made items are based on thestated quantities and the existing material and labor cost. Changes in order quantities may change the quotedpricing. This makes it very important for order quantities to be correct before asking for prices or entering anorder.

NON-RETURNABLE WORK - All custom work including standard hangers made from non-standardmaterials specified by the customer and any item made to a customer's drawing or dimensions is the property of

the customer as soon as GulfStateHangers orders any special material or starts work on any material ininventory. Such material and labor is non-returnable for credit and payment is due GulfStateHangers wheninvoiced. See CONDITIONS AND TERMS OF SALE printed inside the back cover of this catalog for moredetails.

SPECIAL SHAPES - GulfStateHangers reserves the right to fabricate non-standard steel or alloy shapes fromplate of the specified material. This would include angles, channels, tees, H sections, rectangular or square tube,etc. Generally this is due to the required material not being readily available in the required quantity.

EYE RODS - Formed eyes on rod ends will not look exactly like catalog drawings. Generally some larger shopformed eyes will be tear drop shaped and be a little larger than the minimum inside diameter stated in somecatalogs. The following eye opening widths work well and will accommodate the largest pipe hanger bolt size:

ROD SIZE, INCHES EYE WIDTH, INCHES3/8 & 1/2 3/4

5/8 13/4 1-1/87/8 1-1/21 1-7/81-1/4 2-1/81-1/2 3+/-

TURNBUCKLES - One end of every turnbuckle has left-hand threads. This is a must for it to work. So don'tforget to order a Fig. 19CR change rod or a Fig. 22L left-hand eye rod for every turnbuckle you order.

v


6/173

ORDERING INFORMATION

Gulf State Hangers will be pleased to process your inquiry or order regardless of the manufacturers figurenumbers you use.

The Hanger item Name, Figure Number, and Size is all of the information needed to order hangers from mostvendors. With Gulf State Hangers you have choices other than plain black for hangers. Most of the hangers inthe GSHCatalog give a choice of stainless steel or carbon steel. In addition to the Hanger Name, FigureNumber, and Pipe or Rod Size you must specify the material. If your choice is stainless steel and morecorrosion resistance than type 304 or 18-8 stainless is required for your facility, then you must specify thegrade or type material desired. The GSHstainless steel inventory is primarily type 304. Our inventory of type316 items is limited. Most items are available in type 316 on special order. If your choice is carbon steel youcan have many items Plain Black, Zinc Plated, Hot-Dip Galvanized, or Painted to your specification. Hot-DipGalvanized is more economical than most multi-coat paint systems. Chances are the HDG items you need willbe in stock at Gulf State Hangers.

PLASTIC COATED

AND

COPPER COATED HANGERS

A few popular Plastic Coated hangers are included in this catalog.

All hanger items shown with plastic or copper coatings in other manufacturers catalogs are available from GulfState Hangers with the coating. The demand for these items is so small that we did not use catalog space toinclude all of them.

ENGINEERED HANGERS

SWAY BRACES, SWAY STRUTS, CONSTANT SUPPORTS, VIBRATION CONTROL UNITS,ENGINEERED SPRING HANGERS, and HYDRAULIC SHOCK AND SWAY STRUTS are referred to asEngineered Hangers. Gulf State Hangers does welcome inquires on these items. For information on selectingand ordering these items we refer you to the various manufacturers catalogs. Give us a call, or send us a Faxwhen you have your selections made.

We welcome request for Gulf State Hangers / Grinnell Figure Number Conversion Listings.

vi


7/173

GULF STATE HANGERSAND

SUPPORTS MANUFACTURERS

2002 CATALOG INDEX

FINISHESAVAILABLE

FIGURE ITEM NAME FROM GSH1 FLAT WASHER, STEEL BLK/HDG/SS/PLT

2 LOCK WASHER, STEEL BLK/HDG/SS/PLT3 ROD COUPLING, STEEL W/SIGHT HOLE BLK/HDG/SS/PLT3E ROD COUPLING, STEEL WO/SIGHT HOLE BLK/HDG/SS/PLT3R ROD COUPLING, STEEL REDUCING BLK/HDG/SS/PLT4 HEX NUT, RH HEAVY BLK/HDG/SS/PLT5 MACHINE BOLT, W/HEAVY NUT BLK/HDG/SS/PLT6 BEVEL WASHER, MI BLK7 SQUARE WASHER STEEL PLATE - HEAVY BLK/HDG/SS8 SHEAR LUG, RISER CS/SS/ALLOY10 SPRINKLER U-HOOK BLK/HDG/SS11 SWING ROD FITTING - M/F BLK/SS12 SWING ROD FITTING - F/F BLK/SS

13 U-BOLT, WITH ANCHOR CHAIR BLK/HDG/SS14 U-BOLT, STD W/4 HEX NUTS PLT/HDG/SS14BS U-BOLT STRAP BLK/HDG/SS14C U-BOLT, STD W/4 HEX NUTS PLAS.COAT. BLK/HDG/SS14CI U-BOLT, FOR CAST IRON PIPE BLK/HDG/SS14S U-BOLT, NON-STANDARD CUSTOM15 U-BOLT W/ANGLE BASE CUSTOM17 U-BOLT W/ FORMED FLAT BAR LINER CUSTOM18 ROD, ALL THREAD - RH ONLY BLK/HDG/SS/PLT19 ROD, MACHINE THREADED BE RH BLK/HDG/SS19CR CHANGE ROD THREADED RH/LH BLK/HDG/SS19RR ROD, PLAIN ROUND BLK/HDG/SS

20 J-ROD, BEAM HOOK BLK/HDG/SS21 EYE ROD, NOT WELDED RH BLK/HDG/SS21L EYE ROD, NOT WELDED LH BLK/HDG/SS22 EYE ROD, RH WELDED BLK/HDG/SS22L EYE ROD, LH WELDED BLK/HDG/SS23 LINKED EYE RODS, NOT WELDED RH BLK/HDG/SS23L LINKED EYE RODS, NOT WELDED RH/LH BLK/HDG/SS23W LINKED EYE RODS, WELDED RH BLK/HDG/SS23WL LINKED EYE RODS, WELDED RH/LH BLK/HDG/SS24WP ANCHOR BOLT W/WASHER PLATE BLK/HDG/SS24J ANCHOR BOLT W/J-HOOK BLK/HDG/SS24S ANCHOR BOLT PER CUSTOMER DRAWING CUSTOM

25 TURNBUCKLE, FS OR SS BLK/HDG/SS/PLT25F TURNBUCKLE, FABRICATED BLK/HDG/SS26 CLEVIS, FS BLK/HDG/SS/PLT26CP CLEVIS PIN ONLY BLK/HDG/SS

ix


8/173

INDEX, CONTIUES

FINISHESAVAILABLE

FIGURE ITEM NAME FROM GSII26P CLEVIS, FS W/PIN BLK/HDG/SS/PLT27 CHANNEL TRAPEZE - BACK TO BACK BLK/HDG/SS28 STRUCTURAL TUBE TRAPEZE BLK/HDG/PAINT29 SIDE BEAM CLIP ANGLE BLK/HDG/SS/MI30 ANGLE BRACKET BLK/HDG/SS

31-2 TRAPEZE ANGLE, 2-HOLES BLK/HDG/SS31-3 TRAPEZE ANGLE, 3-HOLES BLK/HDG/SS31-4 TRAPEZE ANGLE, 4-HOLES BLK/HDG/SS32 CEILING PLATE - ROD THREADS BLK/HDG/SS33 CEILING PLATE - PIPE THREADS BLK/HDG/SS/MI34 CEILING FLANGE- ROD THREADS BLK/HDG/SS/MI35 CEILING FLANGE - PIPE THREADS BLK/HDG/SS36 WELDLESS EYE NUT, FS OR SS BLK/HDG/SS/PLT36L WELDLESS EYE NUT, FS - LH BLK/HDG/PLT37 C-CLAMP, MI BEAM TOP 1 '/. THROAT BLK/PLT37A C-CLAMP, MI BEAM BOTTOM % THROAT PLT37X C-CLAMP, RETAINING CLIP ONLY BLK/SS

37B-CS C-CLAMP, CS BEAM BOTTOM % THROAT BLK37B-EG C-CLAMP, EG CS BEAM BOTTOM % THROAT PLT37B-SS C-CLAMP, SS BEAM BOTTOM'/. THROAT 304SS38 ADJUSTABLE BEAM CLAMP BLK/HDG/SS39 WELDED BEAM ATTACHMENT W/ PIN BLK/HDG/SS40 WEDED BEAM ATTACHMENT W/O PIN BLK/HDG/SS41 TOP BEAM CLAMP (J-BAR) BLK/HDG/SS42 OFFSET BEAM CLAMP BLK/HDG/SS43 CLOSE BEAM CLAMP BLK/HDG/SS44 I-BEAM CLAMP BLK/HDG/SS45 EXTENDED BEAM CLAMP BLK/HDG/SS46 DOUBLE ANGLE BEAM ATTACHMENT BLK/HDG/SS

48 STRAIGHT J-HOOK HANGER BLK/HDG/SS49 OFFSET J-HOOK HANGER BLK/HDG/SS50 PIPE SADDLE W/ADJUSTABLE ROD SUPPORT BLK/HDG/SS50U PIPE SADDLE W/U-BOLT AND ADJ. ROD SUPPORT BLK/HDG/SS51A PIPE SUPPORT ADJUSTER BLK/HDG/SS51AWB PIPE STANCHION - ADJUSTABLE WELDED BLK/HDG/SS51 WBS PIPE STANCHION - WELDED BASE BLK/HDG/SS51TBS PIPE STANCHION- THREADED BASE BLK/HDG/SS52 PIPE SADDLE WITH COUPLING BLK/HDG/SS52U PIPE SADDLE WITH COUPLING AND U-BOLT BLK/HDG/SS53 PIPE SADDLE WITH SUPPORT STEM BLK/HDG/SS53A PIPE SADDLE WITH ADJUSTER BLK/HDG/SS

53AU PIPE SADDLE WITH ADJUSTER AND U-BOLT BLK/HDG/SS53U PIPE SADDLE WITH SUPPORT STEM AND U-BOLT BLK/HDG/SS54 WALL BRACKET PIPE SUPPORT BLK/HDG/SS56 STEEL BRACKET - LIGHT LOADS BLK/HDG/SS57L LIGHT WELDED BRACKET BLK/HDG/SS

x


9/173

INDEX. CONTINUES

FINISHESAVAILABLE

FIGURE ITEM NAME FROM GSH57M MEDIUM WELDED BRACKET BLK/HDG/SS57H HEAVY WELDED BRACKET BLK/HDG/SS60 ADJUSTABLE CLEVIS HANGER-MEDIUM BLK/HDG/SS60C ADJUSTABLE CLEVIS HANGER-PLASTIC COATED BLK/HDG/SS

60CI ADJUSTABLE CLEVIS HANGER FOR IRON PIPE BLK/HDG/SS60-FP ADJUSTABLE CLEVIS HANGER W/NFPA HOLE SIZE BLK/HDG/SS62 ELONG. CLEVIS HGR FOR INSUL. PIPE TO 650F BLK/HDG/SS62A ELONG. CLEVIS HGR FOR INSUL. PIPE TO 1050F ALLOY64 ANGLE BOTTOM CLEVIS FOR PLASTIC PIPE BLK/HDG/SS66 PEAR SHAPE HANGER BLK/HDG/SS66C PEAR SHAPE HANGER - PLASTIC COATED BLK/HDG/SS66-FP PEAR SHAPE W/NFPA HOLE SIZE BLK/HDG/SS70P CLAMP, LT. WT. I-HOLE PIPE SIZE PLT/SS70T CLAMP, LT. WT. 1-HOLE TUBE SIZE PLT/SS71L RING & BOLT LT. WT. CLAMP BLK/HDG/SS71M RING & BOLT MED. WT. CLAMP BLK/HDG/SS

73A CAST IRON PIPE ROLL - LONG CI73B CAST IRON PIPE ROLL - SHORT CI75 ROLL CHAIR W/2-BOLT STEEL BASE & CI ROLL BLK/HDG75SS STAINLESS ROLL CHAIR W/2-BOLT SS BASE 304/316L75XH HEAVY SS ROLL CHAIR W/2-BOLT SS BASE 304/31676 CAST IRON PIPE ROLL STAND BLK/HDG76SS STAINLESS PIPE ROLL STAND 304/316L76XH HEAVY STAINLESS PIPE ROLL STAND 304/316L77 C.I. ROLL HANGER FOR 2-ROD SUPPORT= BLK/HDG77SS STAINLESS ROLL HANGER- 2 ROD SUPPORT 304/31677XH HEAVY STAINLESS ROLL FOR 2-ROD SUPPORT 304/31677A CAST IRON ADJUSTABLE ROLL SOCKET BLK/HDG

78 C.I. ADJUSTABLE ROLL SUPPORT WITH 2-RODS BLK/HDG78SS STAINLESS ADJ ROLL SUPPORT W/2-RODS 304/31678XH HEAVY STAINLESS ADJ ROLL SUPPORT W/2-RODS 304/31679 ROLL, CI ADJ W/STL YOKE FOR SINGLE ROD BLK/HDG79SS ROLL, ADJ W/YOKE ALL SS FOR SINGLE ROD 304/31679XH HEAVY ROLL, W/YOKE ALL SS FOR SINGLE ROD 304/31680 CLAMP, 2-BOLT MEDIUM BLK/HDG/SS80-1 2-BOLT CLAMP W/ONE LONG EAR BLK/HDG/SS82 CLAMP, 2-BOLT HEAVY BLK/HDG/SS83 CLAMP, MEDIUM RISER/EXTENSION BLK/HDG/SS83-1 OFFSET RISER CLAMP - MEDIUM BLK/HDG/SS83C CLAMP, MED RISER/EXT. -PLASTIC COATED BLK/HDG/SS

83CI CLAMP, MED RISER/EXTENSION FOR CI PIPE BLK/HDG/SS84 CLAMP, 4-BOLT RISER STD BLK/HDG/SS85 CLAMP, 4-BOLT, RISER NON-STD BLK/HDG/SS86 CLAMP, 3-BOLT BLK/HDG/SS86A CLAMP, 3-BOLT CHROME MOLY ALLOY86H CLAMP, 3-BOLT HEAVY DUTY BLK/HDG/SS

xi


10/173

INDEX, CONTINUES

FINISHESAVAILABLE

FIGURE ITEM NAME FROM GSH88 CLAMP, MARINE EXTENDED BLK/HDG/SS88A CLAMP, OFFSET BLK/HDG/SS90 SIDE LOADING HANGER BLK/HDG/SS99 PIPE COVERING PROTECTION SADDLES BLK/HDG/SS/ALLOY100 INSULATION PROTECTION SHIELD, 180 DEGREE BLK/HDG/SS

loos SHIELDS MADE TO CUSTOMER ORDER CUSTOM101 180 DEG. SHIELD W/RUBBER LINING BLK/HDG/SS102 360 DEG. SHIELD W/ CLAMPS BLK/HDG/SS103 360 DEG. RUBBER LINED SHIELD W/ CLAMPS BLK/HDG/SS104 180 DEG. SHIELD W/ CLAMPS BLK/HDG/SS105 180 DEG. RUBBER LINED SHIELD W/ CLAMPS BLK/HDG/SS106 90 DEG. PIPE WEAR SHIELD BLK/HDG/SS106A 120 DEG. PIPE WEAR SHIELD BLK/HDG/SS106B 150 DEG. PIPE WEAR SHIELD BLK/HDG/SS106C 180 DEG. PIPE WEAR SHIELD BLKIHDG/SS106TB TURTLEBACK REINF. SHIELD FOR ELBOWS SS110E ELBOW ANCHOR SUPPORT - WELDED CUSTOM

1 lop PIPE ANCHOR SUPPORT - WELDED CUSTOM111A SHOE SUPPORT, SINGLE STEM W/CRADLE BLK/HDG/SS111B SHOE SUPPORT, DBL. STEM W/CRADLE BLK/HDG/SS111 C SHOE SUPPORT, CUSTOM CUSTOM112 SHOE SUPPORT, SINGLE TEE BLK/HDG/SS113 SHOE SUPPORTW/SGL. STEM TEE & 1 CLAMP BLK/HDG/SS114A SHOE SUPPORT W/SGL. STEM TEE & 2 CLAMPS BLK/HDG/SS114B SHOE SUPPORT W/DBL. STEM TEE & 2 CLAMPS BLK/HDG/SS115 HOLD DOWN CLAMP WBOLT HOLES -MEDIUM BLK/HDG/SS116 HOLD DOWN ANCHOR CLAMP HEAVY BLK/HDG/SS116BP BASE PLATE FOR HOLD DOWN ANCHOR CLAMP BLK/HDG/SS118 SPRINKLER SHORT CLIP BLK/HDG/SS

124 2-BOLT CLAMP WITH ROD COUPLING WELDED ON BLK/HDG/SS125 2-BOLT CLAMP WITH ROD COUPLING AND BASE BLK/HDG/SS126 HALF V & HALF ROUND PIPE CLAMP BLK/HDG/SS127 HALF V & HALF ROUND CLAMP W/ROD COUPLING BLKAHDG/SS130 RIGHT ANGLE PIPE OR CONDUIT CLAMP PLATED131 PARALLEL PIPE OR CONDUIT CLAMP PLATED132 CONDUIT CLAMP SS133 STRUT CLAMP PUPE HANGER HDG/SS/PLT140 SQUARE WASHER W/ROUND HOLE LIGHT BLK/HDG/SS141 SQUARE WASHER WITH SQUARE HOLE BLK/HDG/SS142 SQUARE WASHER WITHOUT HOLE - (HARD SLIM) BLKAHDG/SS143 ROCKER WASHER ASSEMBLY ALLOY

ISO FLANGED COMPONENT HANGER - HORIZ. PIPE BLK/HDG/SS151 FLANGED COMPONENT HANGER - VERTICAL PIPE BLK/HDG/SS152 PIPE FLANGE OFF-CENTER SUPORT BLK/HDG/SS152C PIPE FLANGE CENTER SUPPORT BLK/HDG/SS

xii


11/173

INDEX. CONTIUES

FINISHES

AVAILABLE

FIGURE ITEM NAME FROM GSH

153S

LINED SHOE SUPPORT W/OUT TOP FOR

INSULATEDFRP PIPE CUSTOM

153G LINED SHOE GUIDE W/2 TOP STRAPS FORINSULATED FRP PIPE CUSTOM

153C LINED SHOE ANCHOR FOR INSULATED FRP CUSTOM154AB 360 DEG LINED ANCHOR SHOE FOR FRP PIPE CUSTOM155 PEAR SHAPED HANGER W/RUBBER LINED CUSTOM156 CLEVIS HANGER WITH RUBBER LINED SHIELD CUSTOM157 RUBBER LINED 4-BOLT RISER SUPPORT CLAMP CUSTOM158G RUBBER LINED 2-BOLT RISER GUIDE CLA P CUSTOM158S RUBBER LINED 2-BOLT RISER SUPPORT CLAMP CUSTOM160 RUBBER LINED CLAMPS FOR FRP PIPE 3" - 4" CUSTOM161 RUBBER LINED CLAMPS FOR FRP PIPE 6" -10" CUSTOM

162 RUBBER LINED CLAMPS FOR FRP PIPE 12" -18" CUSTOM163 RUBBER LINED CLAMPS FOR FRP PIPE 20" - 24" CUSTOM164 RUBBER LINED CLAMPS FOR FRP PIPE 30" - 36" CUSTOM165 HANGING LUG FOR FIG 161 CLAMPS CUSTOM166 HANGING LUG FOR FIG 162 CLAMPS CUSTOM167 HANGING LUG FOR FIG 163 CLAMPS CUSTOM168 HANGING LUG FOR FIG 164 CLAMPS CUSTOM169 FIG 160/164 CLAMPS W/SUPPORT WELDING FIN CUSTOM170 FIG 160/164 CLAMPS W/ANCHOR SHOE BASE CUSTOM171 LINED SADDLE W/FIN FOR FRP PIPE 6" - CUSTOM172 LINED SADDLE W/FIN FOR FRP PIPE 12" -18" CUSTOM173 LINED SADDLE W/FIN FOR FRP PIPE 20" - 24" CUSTOM174 FIG 160/164 CLAMPS WITH SLIDING SHOE BASE CUSTOM

175S LINED SHOE SUPPORT W/OPEN TOP FOR FRP CUSTOM175GB LINED SHOE GUIDE W/FULL TOP FOR FRP CUSTOM175GA LINED SHOE GUIDE W/2 STRAP TOP FOR FRP CUSTOM176 WIDE LINED CLAMP FOR FRP PIPE CUSTOM

1761 WIDE LINED CLAMP WANSULATION BANDFOR FRP PIPE CUSTOM

176L WIDE LINED CLAMP W/SIDE LUG FOR FRP PIPE CUSTOM176LI WIDE LINED CLAMP W/LUG & INSULATION

HOLES FOR FRP PIPE CUSTOM200 CONC. ANCHOR PLATE WALUG FOR FGD. BLK/HDG/SS201 CONC. ANCHOR PLATE W/WELD BEAM BLK/HDG/SS202 CONC. ANCHOR PLATE W/ROD ATTACHMENT BLK/HDG/SS220 ANGLE OR CHANNEL BEAM CLAMP BLK/HDG/SS230 BEAM CLAMP W/WELDLESS EYE NUT - BLK/HDG230L BEAM CLAMP W/WELDLESS EYE NUT - BLK/HDG232 BEAM CLAMP W/ SWING NUT BLK/HDG233 STRUCTURAL WELDING LUG - SHORT BLK/HDG/SS

233L STRUCTURAL WELDING LUG - LONG BLK/HDG/SS

235 TWO HOLE WELDING LUG BLK

xiii


12/173

INDEX. CONTINUES

FINISHESAVAILABLE

FIGURE ITEM NAME FROM GSH240 HORIZONTAL TRAVELER- SGL ROLL BLK/SS250 PIPE WELDING LUG FOR LONG RADIUS ELBOW BLK/HDG/SS251 PIPE WELDING LUG FOR SHORT RADIUS ELBOW BLK/HDG/SS

252 PIPE WELDING LUG FOR FIVE DIAMETER BEND BLK/HDG/SS253 PIPE WELDING LUG FOR VERTICAL PIPE RISER BLK/HDG/SS257 HORIZONTAL PIPE RESTRAINT - WELDED BLK/HDG/SS258 HORIZONTAL PIPE RESTRAINT - BOLTED BLK/HDG/SS259 VERT. RESTRAINT FOR HORIZ. PIPE - WELDED BLK/HDG/SS260 VERT. RESTRAINT FOR HORIZ. PIPE - BOLTED BLK/HDG/SS261 HORIZ & VERT RESTRAINT - WELDED BLK/HDG/SS262 HORIZ & VERT RESTRAINT - BOLTED BLK/HDG/SS270 ALLOY STEEL YOKE PIPE CLAMP - STANDARD BLK271 ALLOY STEEL YOKE PIPE CLAMP - HEAVY BLK

FIG 272-277 SOCKET CLAMP USE EXAMPLES272 SOCKET CLAMP, UNDERGROUNG - 2-BOLT BLK/HDG/SS

273 SOCKET CLAMP, UNDERGROUNG - 4-BOLT BLK/HDG/SS274AB SOCKET CLAMP WASHERS BLK/HDG/SS275 SOCKET CLAMP YOKE BLK/HDG/SS276 SOCKET CLAMP PLUG ANCHOR STRAP BLK/HDG/SS277 SOCKET CLAMP TEE ANCHOR STRAP BLK/HDG/SS285 PIPE ALIGNMENT GUIDE -1-CLAMP BLK/HDG/SS286 PIPE ALIGNMENT GUIDE - 2-CLAMPS BLK/HDG/SS287 TEE SHOE WITH TEFLON SLIDE PLATE CUSTOM288 LT. DUTY SPRING CUSHIONS SGL. ROD SUPPORT PRIMED289 SPRING CUSHIONS FOR 2-ROD HANGERS PRIMED

xiiii


13/173

ABBREVIATIONS USED IN THIS CATALOG

A, B, C, ... Indicates 1st, 2nd, 3rd in a seriesA ADJUSTER, ADJUSTABLE, ALLOY, OR ANCHORATR ALL THREAD RODBLK BLACK, PLAIN, OR NO FINISHBP BASE PLATEBS BASE STRAP

BOS/ TOS BOTTOM OF STEEL/TOP OF STEELC CENTER, COATED OR CORROSION RESISTANTCI CAST IRONCP CLEVIS PINCR CHANGE ROD - LH/RHCS CARBON STEELCT COPPER COATEDDI DUCTILE IRONE END, EXCEPTION OR ELBOW EG ELECTRO-GALVANIZEDFAB FABRICATEFB FLAT BARFOT/FOB FLAT ON TOP/FLAT ON BOTTOM

FP FIRE PROTECTIONFS FORGED STEELFRP FIBERGLASS REINFORCED PIPEG GUSSET OR GUIDEH HEAVY, HORIZONTAL OR HANGERHDG HOT-DIP GALVANIZEDL LEFT, LIGHT, OR LONGLH LEFT HANDM MEDIUM OR MALE M/F MALE/FEMALEMI MALLEABLE IRONMSS MANUFACTURERS STANDARDIZATION SOCIETYNFPA NATIONAL FIRE PREVENTION ASSOCIATION

P PIN OR PIPEPLT PLATED (generally zinc)R ROD, ROUND, OR REDUCINGRH RIGID HANGERRR ROUND ROD (no threads)S SHORT, SPECIAL, OR STAMPEDS.D. SPECIAL DESIGNSH SPRING HANGERSS STAINLESS STEELT TUBE OR TUBINGTBS THREADED BASE STANCHIONTB TURTLE BACKTBE/TOE THREADED BOTH ENDSITHREADED ONE ENDTOS TOP OF STEELU U-BOLTV VERTICALW WELDED OR WITHWBS WELDED BASE STANCHIONW/O WITHOUTX CROSSED, LINKED OR EXTRAXH EXTRA HEAVY

vii


14/173

SPECIAL PRODUCTS

BY

GULF STATE HANGERS

DESCRIPTION FIGURE NUMBERS

STAINLESS STEEL ITEMS:

C-CLAMPS, SS 37B-SSCLEVIS, FORGED SS 26CLEVIS HANGERS, SS 60INSULATION PROTECTION SHIELDS, SS 100-105PEAR SHAPE HANGERS, SS 66PIPE COVERING PROTECTION SADDLES, SS 99

PIPE ROLLS, SS 75SS, 75XH76SS, 76XH, 77SS, 77XH78SS, 78XH, 79SS, 79SS

RISER CLAMPS, SS 83TURNBUCKLES, SS 25U-BOLTS, SS 14WEAR PLATES, SS 106WELDLESS EYE NUTS, SS 36

CARBON OR STAINLESS STEEL ITEMS:

SPECIAL SUPPORTS AND HANGERS 150-176

FOR FRP PIPE - CUSTOM MADE

PIPE SUPPORT SHOES 111-114

PIPE SHOES ARE LIKE PEOPLE SHOESTHEY COME IN AN INFINITE NUMBER OF DESIGNS AND SIZES

GULF STATE HANGERSCAN MAKE THEM ALL

CUSTOM SUPPORTS MADE TO CUSTOMERS DRAWINGS

HOT-DIP GALVANIZING AND SPECIAL COATINGS WHEN SPECIFIED

viii


15/173


16/173


17/173


18/173


19/173


20/173


21/173


22/173


23/173


24/173


25/173


26/173


27/173


28/173


29/173


30/173


31/173


32/173


33/173


34/173


35/173


36/173


37/173


38/173


39/173


40/173


41/173


42/173


43/173


44/173


45/173


46/173


47/173


48/173


49/173


50/173


51/173


52/173


53/173


54/173


55/173


56/173


57/173


58/173


59/173


60/173


61/173


62/173


63/173


64/173


65/173


66/173


67/173


68/173


69/173


70/173


71/173


72/173


73/173


74/173


75/173


76/173


77/173


78/173


79/173


80/173


81/173


82/173


83/173


84/173


85/173


86/173


87/173


88/173


89/173


90/173


91/173


92/173


93/173


94/173


95/173


96/173


97/173


98/173


99/173


100/173


101/173


102/173


103/173


104/173


105/173


106/173


107/173


108/173


109/173


110/173


111/173


112/173


113/173


114/173


115/173


116/173


117/173


118/173


119/173


120/173


121/173


122/173


123/173


124/173


125/173


126/173


127/173


128/173


129/173


130/173


131/173


132/173


133/173


134/173


135/173


136/173


137/173


138/173


139/173


140/173


141/173


142/173


143/173


144/173


145/173


146/173


147/173


148/173


149/173


150/173


151/173


152/173


153/173


154/173


155/173


156/173


157/173


158/173


159/173


160/173


161/173


162/173


163/173


164/173


165/173


166/173


167/173


168/173


169/173


170/173


171/173


172/173


173/173

Hanger Support

Documents

Transcript of Hanger Support