Handy Pro Tools Tips
description
Transcript of Handy Pro Tools Tips
3/19/13 Handy Pro Tools Tips
www.soundonsound.com/sos/aug04/articles/protoolsnotes.htm 1/3
Published in SOS August 2004
Printer-friendly version
Handy Pro Tools TipsDigidesign (Avid) Pro Tools Tips & Techniques
Technique : Pro Tools Notes
It's a bumper crop of short tips in this month's guide to allthat's good in Pro Tools...
Simon Price
If you're new to Pro Tools, you might be aware that there are tons of little hints and shortcuts that can help you work faster.This month, Pro Tools Notes compiles the most important tips from every area of the program.
Tracks
Given that a new Pro Tools Session contains absolutely no tracks or mixer channels, it's essential to set up a template
project with a ready-made I/O Setup and mixer. There are tips for speeding up the process of building your mixer below.You can turn a saved Pro Tools Session file into a template on the Mac by Ctrl-clicking on the file, choosing Get Info, thenticking the Stationery Pad option. On Windows, right-click the Session file, choose Properties, then click in the Read Onlybox.
Here are the essential key modifiers for quickly setting up I/O routings across multiple tracks: Holding Alt (Mac andWindows) applies a change to all tracks, whilst holding Alt and Shift applies a change to all selected tracks. HoldCommand and Alt (Ctrl+Alt on Windows) to cascade inputs, outputs or send routings. This means that each subsequenttrack will get an incremental assignment, saving you from setting each track by hand. Finally, adding Shift to thiscombination will cascade only selected tracks' routing.
Plug-ins can be picked up and moved between insert points and tracks. Holding Alt while doing this copies the plug-in.Copied plug-ins take all their settings with them, potentially saving lots of time when setting up your template mixer.Another way to save time when setting up a mixer is to just set up one track exactly as required and then use the DuplicateTracks command from the File menu.
Quick Tips
In Pro Tools 6.4, support for several MIDI control surfaces has temporarily been removed, as they w ere not tested
in time for the release. How ever, the 'personality' f iles needed to re-enable them are available to dow nload from
w w w .digidesign.com/dow nload/ controllers/, along w ith instructions for w here to place the f iles.
For the f irst time, a multi-client hardw are driver is available for Pro Tools systems on the Mac (OS X). Digidesign
Core Audio driver 6.5.1 allow s multiple audio applications to use your Digidesign hardw are simultaneously.
Unfortunately, Pro Tools still hogs the hardw are w hen it's open, so you need to use Rew ire to route third-party
applications w hen running Pro Tools.
If you use the 'R' and 'T' keys for zooming the Edit Window display, you've probably already noticed that holding
either key produces a continuous zoom until you let go. Less obvious is that the behaviour of this function is
determined by your computer's keyboard settings. The Key Repeat Rate and Repeat Delay settings found in your
computer's keyboard control panel directly affect the speed and responsiveness of zooming in Pro Tools.
Clicking and dragging to the left or right on either of the zoom buttons in the Edit Window smoothly expands and
contracts the display w idth.
Pro Tools 6+ has a 'w ide meters view ' w here the meters in both the Mix and Edit w indow s are displayed, w ell,
w ider. Hold dow n all three key modif iers on Mac or Window s keyboards and click the meters to toggle the view mode.
Editing
Everyone uses Pro Tools' editing functions a bit differently, mainly because there are so many alternative routes to thesame ends. However, if you stick to the following method you should achieve fast results. Forget about the Smart Tool
(multi-tool), and forget about clicking the on-screen tool icons. Use the function keys F6 to F8 to choose the active tool.
Using this method you'll only need the Selector tool ('I' beam) and the Grabber (hand): all other edits can be achieved usinga combination of one of these tools and keyboard shortcuts. The Grabber is used for moving audio and MIDI regions
around. Stick to the 'Object' variant of the Grabber, as the 'Time' Grabber is more limited. The Selector can be used foreverything else. Trimming is achieved by dropping the cursor at the desired in or out point and using 'A' or 'S' on the
keyboard to trim from or to this point. If you need to audition the region before trimming, you don't need the Scrub-trimmertool. Instead, you can hold down the Ctrl key, which turns the Selector into the Scrub tool, enabling you to find the right spot
to drop the cursor. Adding fades is similar: place the cursor at the point you want the fade to start or end, then use the 'D'key to create a fade-in, or the 'G' key for a fade-out. Crossfades are created by selecting across a region boundary and
pressing the 'F' key. The fade will start and end at the extremities of your selection. You won't need the Zoomer tool veryoften, because you can use the 'R' and 'T' keys for zooming the display in and out horizontally. Zooming centres the screen
on the current cursor position. If there is a selection on screen the zoom will centre on the start point of this selection. Usethe left and right cursor keys to switch the display between the start and end of the selection.
The number one key command in Pro Tools is Command+'=' (Start+'=') which toggles between the Mixer and the Edit
Windows. Even if you have two screens this can be useful, because all the single-key edit commands are suspended if theEdit Window is not the active window.
Recording
Often, it makes sense to stay in Quick Punch mode so that you can drop into Record at any time. An extra bonus is that
In this article:
Tracks
Quick Tips
Editing
Recording
MIDI/Sequencing
Mixing And Automation
Files
Maintenance
Current Versions
6.4: HD, Accel and LE
systems for Windows XP and
Mac OS 10.3.
6.1: Mix systems on
Windows XP and OS X.
Home | Digital Mags | Podcasts | WIN Prizes | Subscribe | Advertise | About SOS | Help Have an account? or Register for freeTue 19 Mar 2013 Search SOS Log in
Sound On Sound : Est. 1985
Search News Articles Forum SOS TV Subscribe Shop Directory Readers' Adverts Information Blog
3/19/13 Handy Pro Tools Tips
www.soundonsound.com/sos/aug04/articles/protoolsnotes.htm 2/3
With Link Edit/Play Selection deselected,
you can click and drag in the time ruler to
select a section of the song to hear.
The Playback Engine page allow s you to
specify the hardw are buffer size, for
optimal latency.
MIDI input must be enabled for any
device you w ant to use to record
MIDI data.
when in this mode Pro Tools records audio for all record-enabled tracks from the moment you start playback. This meansthat you can't miss anything, and can trim back the start of any recorded regions.
Loop recording mode (where Pro Tools keeps recording over the area selected in
the Edit Window) is particularly useful for recording vocals. Make sure you select a
decent amount of time before and/or after the time you want to record, so that thevocalist can get his or her breath between takes. Each take is kept, and appears in
the Region List. A fairly well known Pro Tools feature is the Multiple Takes pop-up
selector, which allows you quickly to switch between takes recorded in Loop mode.This is accessed by selecting the recorded region, then Command (Ctrl)-clicking it
with the Selector tool.
The simplest, but most useful recording practice is to be careful to always name
your tracks before recording on them. The name of the track determines the nameof any audio recorded on it, which makes other tasks (like finding different takes) much easier.
MIDI/Sequencing
A key difference between Pro Tools and many other sequencer packages is the system for determining the playback area.By default, when you hit Play, Pro Tools will start playing whatever audio or MIDI regions are selected in the tracks in the Edit
Windows. Users of MIDI sequencers are more used to setting a loop duration in the time ruler, which is unaffected by what
you select in the tracks. You do have the option to work this way too, and you'll probably want to take this when writing tunesin Pro Tools. What you need to do is deselect the Link Edit/Play Selection button that is just below the five small zoom
preset buttons in the Edit Window. You can now set your playback loop by dragging out a selection in the time ruler.
The seemingly innocuous MIDI Input Devices option in the MIDI menu is actually
essential. All sources of MIDI must be ticked in the Input Devices box or Pro Toolswill ignore MIDI coming from them.
When arranging, one of the most useful commands is Command+D (Duplicate),
which loops the current selection one time. This command works on time
selections, rather than just MIDI or audio objects in the tracks, so when in Grid editmode, you can easily repeat large sections containing multiple regions.
Large-scale song arrangement can be performed quickly by selecting across all
tracks, and making changes while in Shuffle Edit mode. When you cut or paste
sections in Shuffle mode, all surrounding regions in the timeline move to makeroom (for pastes) or fill the gap (for cuts).
Mixing And Automation
If you're not sure what the Edit menu's 'Write Automation to all Enabled Parameters' command does, then you're missing
out on some key Pro Tools functionality. This command is used to fix particular mixer setups (often called Snapshots)across areas of your song. If there is a selection in the Edit Window, choosing this command will print your mixer settingson the selected tracks. Different groups of parameters (such as pans, or plug-ins) can be excluded from the snapshot by
deselecting them in the Automation Enable window.
Holding Ctrl (Start) while copying or pasting automation will take all automation for allparameters, instead of just the parameter that is being displayed. Command (Start)+Alt+Ctrl-clicking on a plug-in parameter immediately enables it for automation, without
having to go through the rigmarole of enabling it in the Auto window. Alt-clicking resetsfaders, pans and send controls, whilst holding Command (Start) allows for fineadjustments.
Plug-ins are always pre-fader in the signal chain. Be careful not to let the audio clip
when going through a plug-in, because you won't be able to stop it with the faderafterwards. If you want a particular plug-in to be active post-fader, you'll need to outputyour track to an aux track via an internal buss, and put the plug-in on this aux channel.
Files
Double-clicking an audio file from the desktop will automatically import it into the current
Pro Tools Session. And when Pro Tools can't find Fade Files while opening a Session,it's perfectly OK to just choose the 'Skip all Fades' option. This doesn't mean that you arelosing all your fades in the timeline, it just means that Pro Tools has to recreate the
small bits of media it uses to play your fades back.
Maintenance
If you've had a crash, and Pro Tools repeatedly quits on launch even after a restart, you need to delete Pro Tools' settingsfiles for a clean start. On the Mac navigate to Users/[your directory]/Library/Preferences and trash DigiSetup, DAE
Preferences, and Pro Tools Preferences, then restart. On Windows the Pro Tools preferences are at C:\Documents andSettings\[your directory]\Application Data\Digidesign. The DAE Preferences can be found at C:\Program Files\Digidesign\DAE\DAE Prefs.
Pro Tools' performance optimisation settings are found in the Playback Engine page, accessed from the Setups menu. The
Hardware Buffer setting offsets audio throughput latency against plug-in processing power. CPU Processing Limit lets youset the maximum amount of resources allocated to audio playback and plug-ins, so that you can hold some in reserve forthings like screen redraws. The DAE Buffer is Pro Tools' disk reading buffer, so a higher setting allows for increased track
count, at the expense of reduced playback responsiveness.
Published in SOS August 2004
Home | Search | News | Current Issue | Digital Editions | Articles | Forum | Subscribe | Shop | Readers Ads
Advertise | Information | Links | Privacy Policy | Support
DAW Tips from SOS
100s of great articles!
Cubase
Digital Performer
Live
Logic
Pro Tools
Reaper
Reason
Sonar
3/19/13 Handy Pro Tools Tips
www.soundonsound.com/sos/aug04/articles/protoolsnotes.htm 3/3
Email: Contact SOSTelephone: +44 (0)1954 789888Fax: +44 (0)1954 789895
Registered Office: Media House, Trafalgar Way, Bar Hill,Cambridge, CB23 8SQ, United Kingdom.
Sound On Sound Ltd is registered in England and Wales.Company number: 3015516 VAT number: GB 638 530726
Current MagazineeSub Edition
Buy PDF articles
Magazine Feedback
Digital EditionsUK edition
USA digital edition
Podcasts
Competitions
SubscribeSubscribe Now
eSub FAQs
Home
News
SearchNew Search
Forum Search
Search Tips
ArticlesReviews
Technique
Sound Advice
People
Glossary
SoundBank
Help + Support
ForumToday's Hot Topics
Forum Channel List
Forum Search
My Forum Home
My Forum Settings
My Private Messages
Forum Rules & Etiquette
SOS TVWatch exhibition videos, tutorials,interviews, masterclasses
Readers ClassifiedsSubmit New Adverts
View My Adverts
SOS Directory
My SOSChange Password
Change My Email
Change My Address
My Subscription
My eNewsletters
My Downloads
My Goodies
InformationAbout SOS
Contact SOS Staff
Advertising
Licensing Enquiries
Magazine On-sale Dates
SOS Logos & Graphics
SOS Site Analytics
Privacy Policy
All contents copyright © SOS Publications Group and/or its l icensors, 1985-2013. All rights reserved.The contents of this article are subject to worldwide copyright protection and reproduction in whole or part, whether mechanical or electronic, is expressly forbidden without the prior written
consent of the Publishers. Great care has been taken to ensure accuracy in the preparation of this article but neither Sound On Sound Limited nor the publishers can be held responsible for itscontents. The views expressed are those of the contributors and not necessarily those of the publishers.
Web site designed & maintained by PB Associates | SOS | Relative Media