HANDY AUTO & HANDY AUTO PLUS
-
Upload
micah-mercado -
Category
Documents
-
view
127 -
download
0
description
Transcript of HANDY AUTO & HANDY AUTO PLUS
Features
Automatic igniting/extinguishing system
Safety valves maintaining the preset flow-condition of pre-heat oxygen and fuel gas. No re-adjustment.
Cutting Versatility: Straight line, Circle, Shape cutting and Bevel cutting
Easy to handle, and Highly efficient performance
Machine automatically starts when cutting oxygen is turned on.
Driving wheel rotates full 360° All-direction cutting is possible. Wheels can be changed in a moment Step less speed regulator Constant cutting height
Outline of Ignition Unit
Ignition Nozzle
Control Lever for Gas flow and Ignition
Ignition Nozzle
Control Lever
Release Button
Adjusting procedure of igniting
Pull the lever inside first before initial adjustment of flame. Next
Ignite procedure
①
④
③ The fuel gas out of cutting nozzle will ignite.
④ Adjust the flame
① Pull the lever inside more, then pilot flame is made out of igniting nozzle
② Open the fuel gas and oxygen valve a little
②
③
④
Pre-heat oxygen valve
Fuel gas valve
④
⑤ Adjust each gas flow
④ Open the oxygen valve a little
⑥ Get qualified flame
Adjust the flame
Valve condition can be locked after adjusting each gas flow.
Small circle cutting① Setting a radius of circle
② Put on the plate
③ Igniting ④ Heating a piercing point
⑤ Cutting the circle
Specifications
Input power AC 110-240V Cutting thickness 5 ~ 30 mm Speed range 150 ~ 700 mm/min Wheel drive Friction drive Cutting tip Type 102 or 106 Weight 3.5kg
Handy Auto PLUS Kit
1) Main unit 12) Square cutting attachment 13) Auxiliary wheel for square cutting attachment 14) Beveling wheel 15) Small circle cutting attachment 16) Manual guide lever 17) Cutting tips, either type 102, or type 106; #0, #1, #2 1 each8) Spanner for changing tip 19) Fuse (1A) 110) Carrying case (steel) 1
Attachments can be changed in a moment
The Handy Auto Plus can be set up for any type of cutting in a moment.Changing between any of the versatile attachments is a one-hand operation.
All types of cutting in any shape
possible3. Curved line cutting 4. Circular cutting
5. A curved steel plate