Handbook and Quick-Start Guide · 2 LED LITEMAT Introduction Congratulations on the purchase of...

Handbook and Quick-Start Guide

2

LED LITEMATIntroduction

Congratulations on the purchase of your new LiteMat!

LiteMat is a unique and lightweight LED lighting fi xture system designed for cinema, television,

and HD video. Born out of the need for a color-correct light source that is lightweight yet durable,

high quality yet economical, and simple yet cleverly fashioned, LiteMat takes a unique approach

to lighting. By providing evenly spaced, color-correct LEDs spread out over a large area, LiteMat

creates soft light without requiring diff usion. This “soft-through-pixelization” method allows

the unit to achieve surprisingly bright light levels while remaining under 1” (25mm) thick in size

and just 2.2 lb (1 kg) in weight.

We sincerely thank you for joining the LiteGear community by purchasing LiteMat. Since 2006

we have been working closely with fi lmmakers worldwide to help simplify cinema lighting by

empowering users to create their own DIY lighting fi xtures. Your new LiteMat is deeply rooted

in this eff ort. We hope you enjoy using LiteMat, and be sure to try the sample LED LiteRibbon

included with your purchase.

© LITEGEAR INC. 2015 www.litegear.com

USER MANUAL FOR LITEMAT 1, LITEMAT 2, LITEMAT 2L, LITEMAT 3, LITEMAT 4

3

2573 lumens

2923 lumens

2784 lumens

5146 lumens

5846 lumens

5496 lumens


TECHNICAL INFORMATIONThere are five sizes of LED LiteMat in Tungsten, Daylite, and Hybrid CCT.

11.5 x 21 in. (291 x 531 mm)46 Watts

21 x 21 in. (531 x 531 mm)92 Watts

21 x 30 in. (531 x 770 mm)138 Watts

11.5 x 40 in. (291 x 1010 mm)92 Watts

21 x 40 in. (531 x 1010 mm)184 Watts

How to reach us? Info: [email protected] (or your local dealer)Customer Service: +1 (818) 358-8542Help (phone): Call or SMS-Text +1 (818) 495-0600Help (eMail): [email protected] (online): www.litegear.com/help

5146 lumens

5846 lumens

5496 lumens

7718 lumens

8770 lumens

8244 lumens

10291 lumens

11693 lumens

10992 lumens

Tungsten

Daylite

Hybrid

4

GETTING TO KNOW LITEMATGet familiar with your new LED luminaire.


Velcro®, Loop Fastener.

Genuine VHO Pro LEDs. Color-Correct and 95 CRI.

LiteMat PCB.

Unique Poly Composite Material.It keeps the weight down while remaining strong.

Center Mount. For use when mounting to a 5/8-in. (16 mm)Baby stand.

Input Lead.

Cable Nook.

Safety Loop. For use when hanging LiteMat overhead.

CCT (Kelvin Temperature) ID.

Velcro®, Loop Fastener.

Accessory Mounting Points.

5© LITEGEAR INC. 2015 www.litegear.com

LABELINGWhat do all those colored tags mean?

What’s with all the data? LiteMat is available in several sizes and can be controlled and powered by a variety of sources. Refer to the colored tags to ensure that you meet all power and control requirements.

12V DC is the operating voltage. All batteries,power supplies, and adapters must be

limited to 12V (8V~13.5V).Watts identify the maximum

power consumption.

Amps are displayed so you can match compatible LiteDimmers™ and LitePower™ sources.

The Density tag helps identify the relative density of the PCBs used on your LiteMat.

The Power Capacity tag, in addition to the Amps tag, helpsidentify the appropriate LiteDimmer and LitePower supply.

Look for LOW, STD (standard), and HIGH.

The Connector tagspecifi es the electricalconnector on the inputlead. Mate a BAR.M witha BAR.F and a PH3.Fwith a PH3.M.

6

QUICK START GUIDEQuick, step-by-step guide to get your LiteMat up and running.


1. Unpacking LiteMat Your new LiteMat has been packaged to protect it during shipping. To begin, carefully remove all the components in your kit and recycle (or reuse) the plastic and cardboard materials.

2. Attaching the PolySkirt™To attach the PolySkirt, begin by tightening the elastic cord lock. Next, align the PolySkirt over the LiteMat. Lastly, affix the PolySkirt to the LiteMat by firmly pressing it down into the Velcro® on the LiteMat fixture. Make sure the PolySkirt is evenly spaced and aligned on the LiteMat to avoid light leak.

Attach accessories first. It is much easier to attach accessories such as the PolySkirt and the diffusers before hanging your LiteMat or mounting it into a stand. When unpacking, avoid using a knife as your LiteMat and accessories could be damaged!


QUICK START GUIDE (CONT.)Quick, step-by-step guide to get your LiteMat up and running.

3. Installing a diffuserAfter securing the PolySkirt to the LiteMat, select the diffuser you would like to use, and ensure that the Velcro® fastener is positioned on the outside edge. Then, noting orientation, attach the Velcro® fastener section to the inside of the PolySkirt on its upper Velcro® perimeter.

4. Attaching the Parasquare® LouverAfter attaching both the PolySkirt and the diffuser, position the Parasquare® Louver in front of the diffused LiteMat with the small squares toward the LiteMat and the larger squares facing outward. Next, securely fasten all provided Velcro® straps to the PolySkirt and LiteMat. Finish by ensuring that the Parasquare® Louver is securely fastened.

Using the Parasquare® Louver without a diffuser may create irregular results and is not recommended.

8



5. Attaching the Center MountStart by aligning the guide-pin to the center hole on your LiteMat. Next, while holding the center mount at an “8 o’clock” position, align it with the holes on your LiteMat and rotate clockwise until you hear the click.

6. Hanging LiteMat Begin by unscrewing the T-handle on the 5/8 in. (16 mm) Baby pin receiver on the Center Mount attached to the LiteMat. Insert the 5/8-in. (16 mm) Baby pin from the clamp/mount into the pin receiver on the Center Mount. Next, attach a safety cable or mason line to the overhead support and then through the provided safety loop on the LiteMat. Continue by providing electrical connections to the LiteDimmer and power supply.

Great care must be taken when mounting overhead. Hanging a LiteMat should be attempted by professionals only.

9



7. Mounting LiteMat on a standBe sure the stand is equipped with a 5/8 inch (16 mm) pin, and then setup the stand. Next, unscrew the 5/8 nch (16 mm) pin receiver on the Center Mount attached to the LiteMat until it is clear to accept the stand pin. Follow by tightening the 5/8 inch (16 mm) pin receiver around the stand pin until snug.

8. Powering LiteMat with LiteDimmerTo control your LiteMat, begin by preparing your power supply. If you did not buy your LiteMat in a preconfigured kit, be sure the power supply is 12V DC and capable of the appropriate amperage for continuous duty. Next, untie the power supply cables and connect the small, round female Barrel connector from the power supply to the LiteDimmer power input connector. Continue by connecting the LED output of the LiteDimmer to the input of the LiteMat (an extension may be required and/or desired). Then, ensure that the LiteDimmer power switch is set to OFF and provide AC power to the power supply. On the LiteDimmer, move the power switch to either the ON or LOW/ALT position (depending on the LiteDimmer you are using) and adjust the control(s) to the desired level(s). Your LiteMat should now be operational.

10



10. Adjusting the Center MountBegin by loosening the adjustable handle 180º while holding the LiteMat with your other hand. Next, pan, tilt, or rotate LiteMat to the desired position and tighten the adjustable handle. The handle can be adjusted to allow additional force by pulling out and rotating it into a new position.

9. Powering LiteMat directly (without LiteDimmer)Daylite and Tungsten LiteMats may be powered directly from a power supply with no inline LiteDimmer. If you did not buy your LiteMat in a preconfigured kit, be sure the power supply is 12V DC and capable of the appropriate amperage for continuous duty. Next, untie the power supply cables and connect the small, round female Barrel connector from the power supply to the input of the LiteMat (an extension may be required and/or desired). Then, provide AC power to the power supply. Your LiteMat should now be operational.

You can add extensions up to 24 feet in length, if required and/or desired.



12. What’s Next?Be sure to activate your warranty by logging on to http://www.litemat.com.Along with warranty information, we can keep you updated on what’s new with LiteMat!

11. Storing LiteMat with optional KitBagLiteMat is designed for dry, indoor use only. After use, start by disassembling each LiteMat accessory. Next, place the LiteMat and each accessory into the KitBag - LiteMat on its own and the PolySkirt and ParaSquare® Louver together in the adjoining compartment. The set of diff users are to be stored in the upper outside pouches; start by folding each diff user to minimize wrinkling. Then, stow the LiteDimmer, power supply, Center Mount, and cables in the lower pouch. The LiteMat KitBag is provided with additional copy of the product label inserted into the clear window on the KitBag for easy identifi cation of its contents. This bag is specifi cally designed to protect your gear from “everyday” damage due to environmental conditions.

12

ACCESSORIESImages and part numbers.


KitBagLMA-ONE-BAG *LMA-TWO-BAGLMA-TWO-L-BAGLMA-THREE-BAGLMA-FOUR-BAG

LiteDimmerLD-SINGLE-MICROLD-SINGLE*LD-SINGLE-HYBRIDLD-SINGLE-HICAPLD-HYBRIDLD-HYBRID-HICAP

PolySkirtLMA-ONE-SKIRT *LMA-TWO-SKIRTLMA-TWO-L-SKIRTLMA-THREE-SKIRTLMA-FOUR-SKIRT

ParasquareLouverLMA-ONE-LC-GRID*LMA-TWO-LC-GRID LMA-TWO-L-LC-GRID LMA-THREE-LC-GRID LMA-FOUR-LC-GRID

Center MountLMA-MOUNT-S *

Diff userLMA-ONE-DIFF*LMA-TWO-DIFFLMA-TWO-L-DIFFLMA-THREE-DIFFLMA-FOUR-DIFFAvailable in Full, Half and Quarter Diff usion

LitePowerPS-12V-4A-F-ULPS-12V-8A-F-UL*PS-12V-15A-F

ExtensionCableCA-BAR-EXT-12F*CA-PH2-EXT-12FCA-HY-EXT-12F-FLAT-B

CigaretteAuto AdapterCA-CIG-M-BAR-F*

D-Tap AdapterCA-DTAP-BAR-F*

AA Battery AdapterBA-BAA-ENC*

* Item Pictured


TYPE NUMBERS AND ACCESSORIESCompatibility chart.

Description Type # ONE(TUN)

ONE(DAY)

ONE(HY)

TWO(TUN)

TWO(DAY)

TWO(HY)

TWO-L(TUN)

TWO-L(DAY)

TWO-L(HY)

THREE(TUN)

THREE(DAY)

THREE(HY)

FOUR(TUN)

FOUR(DAY)

FOUR(HY)

Tungsten Kit LMK-___-TUN-COMP √ √ √ √ √

Daylite Kit LMK-___-DAY-COMP √ √ √ √ √

Hybrid Kit LMK-___-HY-COMP √ √ √ √ √

Tungsten LiteMat LM-___-TUN-HEAD √ √ √ √ √

Daylite LiteMat LM-___-DAY-HEAD √ √ √ √ √

Hybrid LiteMat LM-___HY-HEAD √ √ √ √ √

PolySkirt LMA-___-SKIRT √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Diffuser (Full) LMA-___-DIFF-F √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Diffuser (Half) LMA-___-DIFF-H √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Diffuser (Qtr) LMA-___-DIFF-Q √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Parasquare Louver LMA-___-PARASQUARE √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Center Mount LMA-MOUNT-S √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

KitBag LMA-___-BAG √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

LiteDimmer Single Micro LD-SINGLE-MICRO √∆ √∆

LiteDimmer Single LD-SINGLE √ √ √ √ √ √

LiteDimmer Single HiCap LD-SINGLE-HICAP √∆ √∆ √∆ √∆ √∆ √∆ √∆ √∆ √∆ √∆

LiteDimmer Hybrid LD-HYBRID √ √ √ √ * √ *

LiteDimmer Hybrid HiCap LD-HYBRID-HICAP √ √ √ √ √

Power Supply Low Cap 4A PS-12V-4A-F-UL √ √ √

Power Supply Std Cap PS 8A PS-12V-8A-F-UL √ √ √ √ √ √ √ √ √ √* √*

Power Supply Hi Cap PS 15A PS-12V-15A-F √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Single Ext 12’ Low/Std Cap CA-BAR-EXT 12F √ √ √ √ √ √ √ √ √ √ √ √ √ √

Single Ext 12’ Hi Cap CA-PH2-EXT-12F √ √ √ √

Hybrid Ext 12’ Low/Std/Hi Cap

CA-HY-EXT-12F-FLAT-B √ √ √ √ √

CigaretteAuto Adapter CA-CIG.M-BAR.F √ √ √ √ √ √ √ √ √

D-Tap Adapter CA-DTAP-BAR.F √ √ √ √ √ √ √ √ √

AA Battery Adapter BA-8AA-ENC √ √ √ √ √ √ √ √ √

√ = Available. √* = In Hybrid Mode only. √ √ = Two cables required for operation. √∆ = Available in 2015.

14

SPECIFICATIONSOptical, photometric, and mechanical Data.


Series Kelvin CCT (K) CRITLCI

(2012)Lumens F.C. /Lux

@ 12” (Size)F.C. /Lux@ 24” (Size)

F.C. /Lux@ 36” (Size)

F.C. /Lux@ 48” (Size)

F.C. /Lux@ 5’ (Size)



LiteMat 1 Tungsten 3200 95 89 2573 599 / 6442(18” x 22”)

205 / 2211(32” x 34”)

100 / 1080(48” x 48”)

60 / 646(66” x 64”)

41 / 444(80” x 78”)

30 / 319(100” x 96”)

19 / 206(131” x 124”)

LiteMat 1 Daylite 6000 95 95 2923 666 / 7168(18” x 22”)

229 / 2460(32” x 34”)

112 / 1202(48” x 48”)

67 / 719(66” x 64”)

46 / 494(80” x 78”)

33 / 355(100” x 96”)

21 / 229(131” x 124”)

LiteMat 1 Hybrid 3200-6000 95 92 2784 632 / 6805

(18” x 22”)217 / 2336(32” x 34”)

106 / 1141(48” x 48”)

63 / 683(66” x 64”)

44 / 469(80” x 78”)

31 / 337(100” x 96”)

20 / 217(131” x 124”)


376 / 4042(36” x 36”)

188 / 2021(50” x 48”)

113 / 1213(70” x 64”)

75 / 808(86” x 80”)

55 / 596(106” x 98”)

35 / 382(138” x 126”)


418 / 4498(36” x 36”)

209 / 2249(50” x 48”)

125 / 1349(70” x 64”)

84 / 900(86” x 80”)

62 / 663(106” x 98”)

39 / 424(138” x 126”)

LiteMat 2 Hybrid 3200-6000 95 92 5496 1140 / 12276

(22” x 22”)397 / 4270(36” x 36”)

198 / 2135(50” x 48”)

119 / 1281(70” x 64”)

79 / 854(86” x 80”)

59 / 630(106” x 98”)

37 / 403(138” x 126”)

LiteMat 2L Tungsten 3200 95 89 5146 764 / 8227(20” x 38”)

315 / 3392(34” x 46”)

170 / 1828(50” x 58”)

108 / 1158(68” x 72”)

75 / 813(84” x 88”)

59 / 630(104” x 108”)

35 / 374(135” x 132”)

LiteMat 2L Daylite 6000 95 95 5846 850 / 9153(20” x 38”)

351 / 3774(34” x 46”)

189 / 2034(50” x 58”)

120 / 1288(68” x 72”)

84 / 904(84” x 88”)

65 / 701(104” x 108”)

39 / 417(135” x 132”)

LiteMat 2L Hybrid 3200-6000 95 92 5496 807 / 8690

(20” x 38”)333 / 3583(34” x 46”)

179 / 1931(50” x 58”)

114 / 1223(68” x 72”)

80 / 858(84” x 88”)

62 / 665(104” x 108”)

37 / 396(135” x 132”)


490 / 5271(36” x 40”)

252 / 2707(52” x 54”)

154 / 1655(70” x 70”)

106 / 1144(86” x 86”)

79 / 848(106” x 106”)

51 / 545(137” x 133”)


545 / 5865(36” x 40”)

280 / 3012(52” x 54”)

171 / 1841(70” x 70”)

118 / 1273(86” x 86”)

88 / 943(106” x 106”)

56 / 607(137” x 133”)

LiteMat 3 Hybrid 3200-6000 95 92 8244 1323 / 14244

(24” x 30”)517 / 5568(36” x 40”)

266 / 2860(52” x 54”)

162 / 1748(70” x 70”)

112 / 1209(86” x 86”)

83 / 896(106” x 106”)

54 / 576(137” x 133”)


591 / 6366(38” x 46”)

329 / 3544(52” x 58”)

208 / 2242(72” x 74”)

146 / 1575(88” x 88”)

109 / 1170(110” x 108”)

65 / 701(141” x 132”)


658 / 7082(38” x 46”)

366 / 3943(52” x 58”)

232 / 2495(72” x 74”)

163 / 1752(88” x 88”)

121 / 1302(110” x 108”)

72 / 780(141” x 132”)

LiteMat 4 Hybrid 3200-6000 95 92 10992 1460 / 15713

(24” x 38”)625 / 6724(38” x 46”)

348 / 3743(52” x 58”)

220 / 2368(72” x 74”)

155 / 1664(88” x 88”)

115 / 1236(110” x 108”)

69 / 740 (141” x 132”)

Series Kelvin Height(inch)

Height(mm)

Width(inch)

Width(mm)

Depth(inch)

Depth(mm)

Weight(lbs)

Voltage(V DC)

Current(Amps) Watts LED Qty

LiteMat 1 Tungsten 21 533 11.5 292 0.9 23 2.3 12 3.8 46 288

LiteMat 1 Daylite 21 533 11.5 292 0.9 23 2.3 12 3.8 46 288

LiteMat 1 Hybrid 21 533 11.5 292 0.9 23 2.3 12 3.8 46 288

LiteMat 2 Tungsten 21 533 21 533 0.9 23 3.5 12 7.7 92 576

LiteMat 2 Daylite 21 533 21 533 0.9 23 3.5 12 7.7 92 576

LiteMat 2 Hybrid 21 533 21 533 0.9 23 3.5 12 7.7 92 576

LiteMat 2L Tungsten 40 1016 11.5 292 0.9 23 3.5 12 7.7 92 576

LiteMat 2L Daylite 40 1016 11.5 292 0.9 23 3.5 12 7.7 92 576

LiteMat 2L Hybrid 40 1016 11.5 292 0.9 23 3.5 12 7.7 92 576

LiteMat 3 Tungsten 30.5 775 21 533 0.9 23 4.7 12 11.5 138 864

LiteMat 3 Daylite 30.5 775 21 533 0.9 23 4.7 12 11.5 138 864

LiteMat 3 Hybrid 30.5 775 21 533 0.9 23 4.7 12 11.5 138 864

LiteMat 4 Tungsten 40 1016 21 533 0.9 23 5.7 12 15.4 184 1152

LiteMat 4 Daylite 40 1016 21 533 0.9 23 5.7 12 15.4 184 1152

LiteMat 4 Hybrid 40 1016 21 533 0.9 23 5.7 12 15.4 184 1152

All LiteMat units feature a 120 degree beam angle and 50,000 hours of operation under typical conditions. Test equipment used for collecting specifications: Optical Equipment: UPR Tech MK350D and Spectra Cine IV “A” model. Power Equipment: Meanwell GS220A12-R7B at 12.0V DC. Camera Strobing: Propri-etary CineHZ Frequency Meter.


TroubleshootingMy LiteMat is plugged into a LiteDimmer that is being supplied with 12V DC power, but it is not turning on. What should I do?

If you have multiple LiteMat setups, try swapping power supplies, LiteDimmers, and cables one at a time until operation is restored.1. Verify that your LiteDimmer is working properly. Using the sample LiteRibbon provided with your LiteMat or other LiteRibbon that is known to be working, plug the LiteRibbon into your LiteDimmer along with 12V DC power, and turn the LiteDimmer on.a. The LiteDimmer works! Proceed to Step #3.b. The indicator light on my LiteDimmer is not turning on even though I turned the LiteDimmer on. (Proceed to Step #2.)c. The indicator light on my LiteDimmer is on but is not a steady color. (Proceed to Step #4.)

2. Verify that your power supply is working properly. Using the sample LiteRibbon provided with your LiteMat or other LiteRibbon that is known to be working, plug the LiteRibbon directly into your power supply, using the power adapter provided with your LiteDimmer if applicable.a. The power supply works! Proceed to Step #4.b. The power supply does not work. Replace the power supply, and repeat Step #1.

3. Your LiteDimmer and power supply are working. Checking the colored tags on your LiteMat (see “Labeling” on page 5 for more information on the colored tags), verify that you are using the appropriate LiteDimmer and power supply.a. I am using the correct LiteDimmer and power supply. Check the input connector on the LiteMat to ensure that there is no damage. If it appears to be acceptable, contact the LiteGear Repair Department.b. I am not using the correct LiteDimmer and/or power supply. One component at a time, replace the LiteDimmer and/or the power supply, depending on which one did not meet minimum operational requirements. Repeat Step #1 if you replaced the LiteDimmer or Step #2 if you replace the power supply.

4. Your LiteDimmer is not working properly. Please refer to the “Troubleshooting” section of the LiteDimmer User’s Guide provided with your LiteDimmer, or visit http://www.litegear.com/support/document/, and find the appropriate LiteDimmer User’s Guide online.

5. Still not working? Contact the LiteGear Customer Service Department to provide a detailed explanation of the problem(s) with your LiteMat and to obtain a Return Materials Authorization (RMA) number.

Maintenance As you use your LiteMat, you should keep a few things in mind to help maintain the quality of your LiteMat.

1. Keep your LiteMat clean!Be sure to unplug all components before cleaning. Using glass or plastic cleaner, or simply a damp cloth, maintain the cleanliness of the surfaces of your LiteMat, paying particular attention to the protective clear plastic covering. Dirt and debris could impair light output and light quality.

2. Check the wire and connectors!Especially after repeated use, the integrity of the wire and connectors could become compromised. Check the wire to ensure there are no cuts in the insulation and that there is no exposed copper wire. If there is any exposed copper, insulate the affected area with electrical tape or heat shrink, or contact the LiteGear Repair Department for other suggestions. Also, inspect the connector on your LiteMat’s input lead for any physical damage. If a connector needs to be replaced, contact the LiteGear Repair Department.

3. Be careful with Velcro®!The Velcro® fastener used to make your LiteMat so versatile and lightweight may lose some of its strength over time with repeated use. To minimize this wear, try to keep dirt and debris from being caught in the hook or loop fastener of the Velcro®. Also, be mindful of the force applied to the Velcro® when adding or removing various accessories. Too much force could compromise the integrity of the adhesive that keeps the Velcro® cleanly attached to your LiteMat or other accessories.

4. Make sure to properly store your LiteMat!We have designed the LiteMat KitBag to be the perfect vessel for your LiteMat when it is not lighting your next commercial, television show, or feature film. Be sure to keep the LiteMat from being crushed, stepped on, or otherwise damaged, as the LEDs themselves are very sensitive electronic components.

TROUBLESHOOTING AND MAINTENANCETips to get you back to work.

LITEGEAR INC.An IATSE Local 728 Member-Owned Company

4406 W. Vanowen StreetBurbank, California 91505, USA

+1 (818) [email protected]

www.litegear.com

SPECIALTY LIGHTING GEAR FOR CINEMA, TV, AND HD VIDEO

Please place yourLiteMat serial label here.

© 2015 LITEGEAR Inc. All rights reserved. LiteRibbon® is a registered trademarks of LiteGear Inc.© 2015 LITEGEAR Inc. All rights reserved. LiteGearTM, LiteMatTM, LiteDimmerTM, FauxFloTM, KitBagTM and PolySkirtTM are trademarks of LiteGear Inc.VELCRO® is a registered trademark of VelcroIndustries B. V.Parasquare® is a registered trademark of SLP Lighting.

261-

39

Handbook and Quick-Start Guide · 2 LED LITEMAT Introduction Congratulations on the purchase of...

Documents

Transcript of Handbook and Quick-Start Guide · 2 LED LITEMAT Introduction Congratulations on the purchase of...