10000-16000KN

JUⅡ/h High-performance two platen machine

Specifications

Haitian

Jup

iterⅡ

/h Series

Haitian Jupiter Series

NINGBO HAITIAN HUAYUAN MACHINERY CO., LTD,Export Processing Zone, Ningbo 315800 ChinaTel +86-574-86177242Fax +86-574-86221864haitian@mail.haitian.com www.haitian.com

Haitian Partner:

HAITIAN INTERNATIONAL HOLDINGS LIMITEDUnit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.Thaitian@mail.haitian.com www.haitian.com

HT

2014

0418

-IV

③

④

Figure ①Assemble bigger mold because of mold thickness increased compared with the some clamping force machine. It use upside-down ejection device .Ejection stroke controlled by computer can be freewill set.

Figure ②The four clamping cylinder on the fixed platen can quickly build clamping force, and the process is fast. mold stressed uniformity and real-time monitor of clamping force by the pressure sensor ,thereby repeated clamping force can be good reproducibility

Figure ③Synchronous split nuts ensure the nuts close quickly and reliably

Figure④High rigidity slide foot, ensure that movable platen can maintain absolute parallel with fixed platen even use the heaviest mold. movable plate eliminates any tilting torque by the bottom and side of base guide , mold bearing capacity increase greatly.

①

②

Haitian is at once motivated by customer requirements and driven by the very latest market research and development. In order to meet even greater customer demand, we are proud to present the Haitian JupiterⅡ/ h series–a continuation of the well-received JupiterⅡseries. This model combines an even more advanced design concept than its predecessor, with a newer more durable hardware configuration. Every single component has been improved and upgraded - as a result several performance indicators have risen dramatically. As well as increased precision, the mold thickness has also been increased for maximum power saving. The JUⅡ/h series boasts extremely high performance. It is suitable for large molding parts that require a higher mold thickness - such as waste containers, home appliances and automotive parts.

Significant increases in mold thickness

Sketch of platen with similar clamping force (comparison)

Standard machine platen

JUⅡ/h high-performance machine platen

maximum 33% increase in mold thickness when compared to the JUⅡwith

the same clamping force. The new model has a high performance vs. cost

ratio. It is particularly suitable for large molding parts which require a higher

mold thickness.

www.haitian.com2 3

Haitian Jupiter Ⅱ /h SeriesHigh-performance two platen injection molding machine

72XM24 L55

840700

A-A T-slot

28 46

5220

700

560

560

490

490

420

420

350

350

280

16XØ58

Ø200

50

350500

14321920

660

50

10570

12XM24 L50

Ø25

0

SR20

Ø6 56

0 840

650-12001300

5159 35005040

2616

2473

2170

3308

105

200

75125

8XØ39

280

140

140

1670

1182

500 35

0 200

125

75 50

5075125

200

350

500

650

5075125

200350

500650

36

6625

60

1322

15772140

1885

A-A T-slot

700-13001800

5810

2795

2662

4280

2165

5626 3775

50

760

SR20

Ø6

Ø25

0

980

700

14014070

12XM24 L50

980840

700560

420280

140

24XØ58

Ø200

8xØ39

140 28

0 420 560 70

0 840

60XM30 L70

140280

420560

700840

9801120

140 28

042

0 560 70

0 840 98

0

125

200

350

500

650

75125

200350

500650

18772530

2095

1442

36

66

25

60

A-A T-slot

800-15001900

6195 6068 4375

3072

2902

4831

2831

Ø31

5

Ø8

50

850

SR20

1120

840

14070 140

12XM24 L50

24XØ58 Ø315

60XM30 L65

75

www.haitian.com

JU10000Ⅱ/8400h

B11022

48474410750124182

0-120

100001430X1180

12006503502302500

1300/185018

17.575+22+7.5

71.5510.6X3.5X3.4

532001500

JU12000Ⅱ/10600h

B12024

622056601026165171

0-120

150001575X1320

13007003502303100

1800/240030

17.5110+22+7.5

91.3511.9X3.8X4.3

704002000

JU16000Ⅱ/14600h

B14022.3969867891318202148

0-105

160001875X1440

15008003502303400

1900/260045

17.5110+55+7.5

101.3512.7X4.4X4.9

974002600

4 5

Machine dimensions

INJECTION UNITScrew Diameter mmScrew L /D RatioShot Size (Theoretical) cm3

Injection Weight (PS) gInjection Rate g/sPlasticizing Capacity(ps) g/sInjection Pressure MpaScrew Speed rpmCLAMPING UNITClamp Tonnage KNSpace Between Tie Bars mmMax.Mold Height mmMin. Mold Height mmEjector Stroke mmEjector Tonnage KNMax. Daylight mmMould Opening Stroke ＊ mmMax. mold weight＊＊ tOTHERSMax. Pump Pressure MpaPump Motor Power KwHeater Power KwMachine Dimension(L×W×H) mMachine Weight tHopper Capacity KgOil Tank Capacity l

Specification

We reserve the right to make changes as a result of further technical advantages.

Moving platen

Platen dimensions

Mounting hole for robot/sprue picker top view from fixed platen

Platen dimensions

www.haitian.com6 7