1

G.V. (REX) REKLAITIS: Edward W. Comings Professor of Chemical Engineering

School of Chemical Engineering

Purdue University

West Lafayette, IN 47907

Education:

Illinois Institute of Technology

B.S., 1965 with Highest Distinction

Chemical Engineering

Stanford University

M.S. and Ph.D., 1969

Chemical Engineering

Professional Experience:

Purdue University, Professor of Industrial and Physical Pharmacy (by courtesy), October 20, 2006 - present Purdue University, Deputy Director, NSF Engineering Research Center on Structured Organic Particulate Systems, July 1, 2006- present

Purdue University, Co-Director, Pharmaceutical Technology & Education Center, July 1, 2006- present. Purdue University, Edward W. Comings Professor of Chemical Engineering, 1/2004-present Purdue University, Head, School of Chemical Engineering, 12/1987 – 12/2003 (Interim head: 8/87-11/87) Purdue University, Director, Computer Integrated Process Operations Center (CIPAC) 5/92 – 5/99.

Purdue University, Assistant Dean of Engineering, Graduate Education and Research, 1985 - 1988. Purdue University, Professor, School of Chemical Engineering, 1980 - present

Senior Fulbright Lecturer, Vilnius State University and Lithuanian Academy of Science, Vilnius, Lithuanian S.S.R., 2/80 - 7/80.

Purdue University, Associate Professor, Chemical Engineering, 1976 - 1980.

Purdue University, Assistant Professor, Chemical Engineering, 1970 - 1976.

Institut fur Operations Research und Elektronische Datenverarbeitung, Zurich, Switzerland, NSF

Postdoctoral Fellow, 1969 - 1970.

Stanford University, Research Assistant, 9/65 - 9/69, (excluding Summer 1966 & 1967).

Research Engineer with CPC, Argo, Illinois; Sinclair Oil, Harvey, Illinois; Int'l Minerals and Chemicals, Libertyville, Illinois, Summers 1964 - 1967.

Academic and Professional Honors: U.S. National Academy of Engineering, member, Feb 2007

Professional Achievement Award, Illinois Institute of Technology, May, 2006

2

Merck, Sharp & Dohme Lecturer, University of Puerto Rico, Mayaguez, Oct 2005

Distinguished Alumni Award, Illinois Institute of Technology, Department of Chemical and Environmental

Engineering, October 2002.

Phillips Lecturer, Oklahoma State University, Feb 2000

Texas Distinguished Lecturer, University of Texas, Austin, Dept. of Chem. Eng, April, 1998.

ASEE Chemical Engineering Division, Lectureship Award, 1994.

Fellow, AIChE, 1994

Distinguished Lecturer, Auburn University, Dept. of Chem.Eng., Feb, 1994.

Best Paper of 1994, Computers & Chemical Engineering, (co-author).

ASEE Chemical Engineering Division, 1991 Corcoran Award Best 1991 paper in Chemical Engineering Education (co-author). AIChE Computing and Systems Technology Division, Computing in Chemical Engineering Award, 1984. Senior Fulbright Lecturer, Vilnius State University and Lithuanian Academy of Science, Vilnius Lithuanian S.S.R., 2/80 - 7/80. NSF Postdoctoral Fellow, Institut fur Operations Research und Elektronische Datenverarbeitung, Zurich, Switzerland, 1969 - 1970.

Biographical Citations: American Men and Women of Science Who's Who in Engineering Who's Who in Technology Today Who's Who in the Midwest Who's Who of Engineering Leaders in America Personalities of America

TECHNICAL AND PROFESSIONAL SOCIETY ACTIVITIES Professional Society Offices and Memberships

Member of AAAS, ACS, AIChE, ASEE, Mathematical Programming Society, INFORMS AIChE (American Institute of Chemical Engineers)

Director, 1997-1999

Organization Structure Transition Task Force, 1997-98 Vision 2020 Task Force, 1997-2000 Publications Committee, Vice-Chair, 1997-1999; Chair, 2000-2002, 2004

Meeting Program Chair, AICHE 2002 Annual Meeting 2008 Centennial Steering Committee, 2006-2008 National Program Committee, Group 10C, Chairman 1981-1985

Executive Board, 2nd

Vice-Chair, 2005; 1st Vice-Chair, 2006, Chair, 2007

Computing and Systems Technology Division,

Director 1980-1983

3

Programming Board Chairman 1986-1988

Division Second Vice-Chairman, 1989

Division First Vice-Chairman, 1990

Division Chairman 1991

Division Past Chairman 1992

CACHE (Computer Aids for Chemical Engineering Education) Corp.

Trustee, 1979-present

Secretary, 1982-1984

Vice-President, 1984-1986

President, 1986-1988

Computers & Chemical Engineering, Pergamon Press/Elsevier Science

Editorial Board, 1983-1986

Co-Editor in Chief, 1986-1994

Editor-in-Chief, 1994-present

Computer Applications in Engineering Education Editorial Board 1992-present

Industrial & Engineering Chemistry Research

Editorial Board 2000- 2003 Journal of Pharmaceutical Innovation

Editorial Board 2005-present Council for Chemical Research Academic Member, 1988-present, International Committee, 1993-2002; Chair, 1993-1997 Governing Board, 1994-1997 Executive Committee, 1997 Vision 2020 Steering Committee, 1997-2000

ASEE, Chemical Engineering Division, Union Carbide Lectureship Award Selection Committee, 1995-1997.

Other Selected Professional Activities

Kirckpatrick Chemical Engineering Achievement Award, Board of Judges, 1991, 1993, 1999, 2001, 2003; Chair, 1995, 1997

Chemical Engineering Personal Achievement Award, Board of Judges, 1996, 1998, 2000, 2002 Advisory Board, ChE Department, Carnegie Mellon University, 1991- present

Advisory Committee, Chemical & Environmental Engineering Department, Illinois Institute of Technology, 1997 - present.

Advisory Committee, Department of Chemical Engineering, Qatar University, 2004-present, chair Curriculum Reform Task Force, Department of Chemical Engineering, Qatar University, 2006 , chair

Program Review Panel, Louisiana State University, Department of Chemical Engineering, external member,

March, 1997.

Visiting Professor and External Examiner, Polytechnic University of Catalunya, Barcelona, Spain, July, 1997; External Examiner, June 2001.

4

External Examiner, Imperial College of Science, Technology, and Medicine, University of London,

London, UK, January, 1998

External Examiner, Abo Akademi University, Abo, Finland, December 2005

International Organization for Process Systems Engineering, American Representative & Member,

Executive Committee, 1988-present; Chair, 2000-2003

NSF Engineering Design Research Center, Carnegie Mellon University, NSF Site Review Panel 1988,

1992; Technical Review Committee, 1993.

Technical Barriers to Computer Integration of Manufacturing, Manufacturing Studies Board, National

Research Council, member Steering Group, 1987-88

Department of Energy, Fossil Energy Speaker, 1979-1981

MIT-Department of Energy, ASPEN Project Advisory Committee, 1976-1981

Symposia and Sessions Organization International Symposium on Systems Analysis and Engineering, Vice-Chairman, West Lafayette, Indiana, October, 1972. Mathematical Programming Techniques, Session Chairman, IFAC Symposium on Large Scale Systems: Theory and Applications, Udine, Italy, June, 1976. Design and Operation of Batch Plants, Session Chairman, 12th Symposium on Computers Application in Chemical Engineering, Montreux, Switzerland, April, 1979. Computational Techniques in Design and Simulation, Session Chairman and Symposium Vice Chairman, I&EC Symposium on Computer Applications to Chemical Engineering Process Design and Simulation, Washington, D.C., September, 1979. Synthesis and Design of Plant Utility and Energy Recovery Systems, Session Chairman, AIChE National Meeting, Houston, April, 1981. Production Planning for Multi-product Plants, Session Chairman, AIChE National Meeting, Houston, Texas, April, 1981.

Computerized Cost Estimating, Session Co-Chairman, AIChE National Meeting, Houston, Texas, April, 1981. Computer Aided Design of Batch & Semicontinuous Processes, Session Chairman, AIChE Annual Meeting, New

Orleans, November, 1981.

Computer Graphics and Modular Instruction, Session Chairman ASEE Summer School for ChE Faculty, Santa Barbara, August, 1982.

Status of Large Scale Optimization, Session Chairman, AIChE Annual Meeting, Los Angeles, November, 1982.

Process Synthesis and Analysis, Session Chairman, 3rd Pacific Chemical Engineering Congress, Seoul, Korea, May, 1983.

Third Int'l. Congress on Computers and Chemical Engineering, Paris, April, 1983, Member Scientific Committee

and Session Chairman.

5

Computer Aided Design of Batch and Semicontinuous Processes, Session Chairman, AIChE Annual Meeting, San

Francisco, November, 1984.

Computing Technology Status Review, Session Chairman, AIChE National Meeting, Houston, March, 1985.

Process Systems Engineering 1985, European Fed. Chem. Engr., Cambridge (UK), March, 1985, Member

Technical Committee.

Computer Aided Design, Session Chairman, World Congress III of Chemical Engineering, Tokyo, Japan, Oct 1986.

CIChE-AIChE Symposium on Modern Chemical Engineering Technology, Taipei, Taiwan, Sept 1986, member of

US delegation.

First International Conference on Foundations of Computer Aided Process Operations, July 5-10, 1987, Park City,

Utah, Conference co-chairman.

Design and Scheduling of Batch Processes, Workshop Chairman, 1987 ASEE Chemical Engineering Faculty

Summer School, August 9-14, 1987, North Dartmouth, MA. Scheduling and Planning of Operations I & II, Session Chairman, AIChE Annual Meeting, New York, November, 1987. Third International Symposium on Process Systems Engineering, Sydney, Australia, August, 1988, member of Organizing Committee and US representative. Design and Operation of Batch Processes, Short Course sponsored by U.S.-Spain Joint Committee for Scientific and Technological Cooperation, Barcelona, Spain, May 4-6, 1987, May 30-June 1, 1988, June 12-14, 1989 and September 25-27, 1990, Principal Lecturer. Design and Analysis I-III, Session chair/co-chair, AICHE Annual Meeting, Washington DC, November, 1988. IFAC Symposium on Dynamics and Control of Chemical Reactors, Distillation Columns, and Batch Processes, Maastricht, the Netherlands, August, 1989, member of International Program Committee. Computer Integrated Process Engineering 1989, Institution of Chemical Engineers, Leeds, England, September 1989, member of Technical Committee. Fourth International Symposium on Process Systems Engineering, PSE '91, Montebelo, Quebec, August, 1991, Co-chair, International Program Committee. IFAC Symposium on Dynamics and Control of Chemical Reactors, Distillation Columns, and Batch processes,

College Park, MD April, 1992, Member International Program Committee. NATO Advanced Study Institute, Batch Processing Systems Engineering, Turkey, May 29-June 7, 1992, Co-

Director.

Fifth International Symposium on Process Systems Engineering, PSE'94, Korea, May 1994, International Program Committee.

Progress in Computer Integrated Manufacturing in the Chemical Process Industries, Session Chairman, AIChE Annual Meeting, Miami Beach, November, 1992.

Second International Conference on Foundations of Computer Aided Plant Operations, Advisory Committee member

and session chair, Flexibility and Integration, Crested Butte, CO, July 18-23, 1993.

Progress in Computer Integrated Manufacturing in the Chemical Process Industries, Session co-chairman, AIChE Annual Meeting, St. Louis, November, 1993.

6

Modeling, Simulation, and Control in the Process Industries, IASTED Conference, member International Program

Committee, Ottawa, Canada, May 25-27, 1994.

Fourth International Conference on Foundations of Computer Aided Process Design, Advisory Committee member and Contributed Papers chair, Snowmass, CO., July 10-15, 1994.

World-wide Industry-University-Government Research Collaboration Models in the Chemical Sciences and

Engineering, CCR-NSF Workshop, Workshop chair, Pittsburgh, PA, October 7, 1995,

Globalization of Research, Council for Chemical Research Annual Meeting, Plenary session chair, Pittsburgh, PA.

October 8-10, 1995,

Sixth European Symposium on Computer Aided Process Engineering (ESCAPE6), Plenary session co-chair, Rhodes,

Greece, May, 1996.

Computer Applications and Process Systems Engineering, session co-chair, Second Joint China/USA Chemical

Engineering Conference, Beijing, China, May, 1997. Batch Processes, session co-chair, Sixth International Symposium on Process Systems Engineering, Trondheim, Norway, May, 1997. International Perspectives: Models for Success, plenary session co-chair, CCR Annual Meeting, St. Louis, Sept, 1997. Productivity Enhancement through Advanced Model-Based Technologies, session chair, ISA Annual Meeting, Anaheim, Oct., 1997. Batch Processing, session chair, European Symposium on Computer Aided Process Engineering - VIII, Brugge, Belgium, May, 1998 . Comparisons of Chemistry & ChE Graduate Programs in the Developed Countries, workshop chair, CCR Annual Meeting, Orlando, October, 1998.

Fifth International Symposium on Foundations of Computer Aided Process Design, Advisory Committee member and session chair, Progress in Optimization Methods, Breckenridge, CO, July, 1999. Batch Process Applications, session chair, ENPROMER conference, Florianopolos , Brazil, August, 1999.

Optimization Methodologies for Design, session chair, Second PanAmerican Workshop of Catalysis & Process Systems Engineering, Santa Fe, Argentina, September, 1999.

Vision 2020: Focus on Manufacturing and Operations, session chair, AIChE Annual Meeting, Dallas Tx, November, 1999

Seventh International Symposium on Process Systems Engineering, Conference Co-Chair, Keystone, Colorado, July,

2000.

Fourth International Conference on Foundations of Computer Aided Process Operations, Technical Program Committee, Coral Springs, FL, January 2003.

Sixth Italian Conference on Chemical and Process Engineering, International Scientific Committee, Pisa, Italy, June 2003.

Eighth International Symposium on Process Systems Engineering, International Program Committee, Executive

Committee chair, Kunming, China, June 2003.

7

International Conference on Foundations of Computer-Aided Process Design, Conference Technical Committee,

Princeton, NJ, July 2004.

European Symposium on Computer Aided Process Engineering–14, International Program Committee, Lisbon,

Portugal, May 2004.

European Symposium on Computer Aided Process Engineering–15, International Program Committee, Barcelona,

Spain, May 2005.

Chemical Process Control 7, Organizing Committee & plenary session chair, Lake Louise, Canada, January 2006

NIPTE Strategic Roadmap Workshop, Co-chair,

Rockville MD Sept 7-8, 2006.

Gaithersburg MD, Jan 24-26, 2007.

Caguas, Puerto Rico, Feb 22-24, 2007.

Transforming Pharmaceutical Development and Manufacturing, symposium co-chair, International Society of

Pharmaceutical Engineers Annual Mtg, Orlando, Fl, November 6, 2006. Technology Roadmap: Pharmaceutical Product Development and Manufacture I & II, session chair, AIChE Annual Mtg, San Francisco, November 15, 2006. European Symposium on Computer Aided Process Engineering–17, International Program Committee, Bucharest, Romania, May 27-30, 2007. European Symposium on Computer Aided Process Engineering–18, International Program Committee, Lyon, France, June 1-4, 2008. Foundations of Computer Aided Process Operations, Technical Advisory Committee, Marlborough MA, July 13-16, 2008.

PUBLICATIONS Books

R.G. Squires and G.V. Reklaitis (eds) , Computer Applications to Chemical Engineering Process Design and

Simulation, ACS Symposium Series, Volume 124, 1980.

G.V. Reklaitis, Introduction to Material and Energy Balances, Wiley, 1983. Interamericana (Spanish Edition), Mexico City, Mexico, 1986.

G.V. Reklaitis, A. Ravindran, and K. Ragsdell, Engineering Optimization, Wiley-Interscience, 1983, Mir (Russian Edition), Moscow, USSR, 1986; Nat’l Institute for Compilation and Translation (Chinese edition), Taipei, Taiwan, 1995; Korean edition, 2001; Second edition 2006.

G.V. Reklaitis and H.D. Spriggs (eds), Proceedings of the First International Conference on Foundations of

Computer Aided Process Operations, CACHE and Elsevier Science Publishers, 1987.

G.V. Reklaitis, A. Sunol, D.W.T. Rippin, O. Hortacsu, (eds), Batch Processing Systems Engineering, NATO ASI Series F, Volume 143, Springer Verlag, Berlin 1996, 868 pages.

J. Mockus, W. Eddy, A. Mockus, L, Mockus, and G.V. Reklaitis, Bayesian Heuristic Approach to Discrete

and Global Optimization, Kluwer Academic Publisher, the Netherlands, 1997, 396 pages.

G.V. Reklaitis and J.J. Siirola (eds), Proceedings of the 7

th Int’l Symposium on Process Systems

Engineering, published as special volume of Computers & Chemical Engineering, Vol 24, Elsevier Science, the Netherlands, 2000, 1623 pages

8

Book Chapters and Edited Publications G.V. Reklaitis and J.E. Goldberg (eds), International Symposium on Systems Engineering, Vol II: Contributed

Papers, Purdue University, 1972.

G.V. Reklaitis, "Optimization Techniques for Supervisory Control,"Digital Computer Applications to Process

Control, PLAIC, Purdue University, Vol II, Chapt 6, 1-62, 1973.

G.V. Reklaitis, "The Underlying Structure of the Primal and Its Use in Computation," in Applied Geometric

Programming, C.S.Beightler and D.T. Phillips, Chapt 13, Wiley, 1976.

T.F. Edgar and G.V. Reklaitis (eds), "Application of Computer Graphics in Chemical Engineering," special issue of

Computers and Chemical Engineering, 5, No.5, 1981.

A.Ravindran and G.V. Reklaitis, "Optimization-An Overview," Handbook of Industrial Engineering, G. Salvendy

(ed), Chapter XIV-1, Wiley, 1982; second edition, 1998. R.S.H. Mah and G.V. Reklaitis (eds), "Selected Topics in Computer Aided Process Design and Analysis," AIChE

Symp. Ser. 78, No.214, 1982. G.V. Reklaitis and J. Siirola (eds), "Data Base Implementation and Applications," AIChE Symp. Ser. 79, No. 231, 1983. G.V. Reklaitis and I. Grossmann (eds) , "Large Scale Optimization," special issue of Computers and Chemical

Engineering, 7, No. 5, 1983. A. Ravindran and G.V. Reklaitis, "Design Optimization - an Overview," in Mechanical Engineers' Handbook, M. Kutz (ed), Chapt 21, Wiley, 1986; second edition, 1998, third edition 2005. L.T. Biegler, I. Grossmann, and G.V. Reklaitis, "Application of Operations Research Methods in Chemical Engineering," Chapter 6 in Engineering Design: Better Results Using OR Methods, R.R. Levary (ed), Publications in Operations Research Series, North-Holland, 1988. Reklaitis, G.V., J. F. Pekny, and G.S. Joglekar, "Scheduling and Simulation of Batch Processes", in Handbook of

Batch Process Design, P.N. Sharratt, (ed), Blackie Academic & Professional, London, 1997, pp. 24-60.

9

Published Papers: G.V. Reklaitis and D.J. Wilde, "A Computationally Compact Sufficient Condition for Constrained Optima,"

Operations Research 17, 425-436, (1969).

G.V. Reklaitis and D.J. Wilde, "A Differential Algorithm for Polynomial Programs," DECHEMA Monographien,

67, 324-350, (1970).

G.V. Reklaitis and D.J. Wilde, "Necessary Conditions for a Local Optimum without Prior Constraint Qualifications,"

in Optimizing Methods in Statistics, J.S. Rustagi, (ed.), Academic Press, 1971.

G.V. Reklaitis, "On Optimality Criteria for Constrained Optima," AIChE J. 18, 240-242, (1972).

G.V. Reklaitis, "A Survey of Computational Methods for Optimization," Proceedings, Volume I, International

Symposium on Systems Engineering and Analysis, Purdue University, 108-117, (1972).

T.D. Duncavage, G.V. Reklaitis and J.M. Woods, "A GASP IV Simulation of Inventory Control and Production Scheduling for a Multi-Product Plant," Proceedings 5th Pittsburgh Conference on Modelling and Simulation,

(1974). D.T. Phillips and G.V. Reklaitis, "Constrained Derivatives and Equilibrium Relations in Generalized Geometric Programming," J. Engin. Math., 8, 311-314, (1974). W.M. Fruit, G.V. Reklaitis and J.M. Woods, "Simulation of Multi-product Batch Chemical Processes," Chem.

Engin. J., 8, 199-211, (1974). G.V. Reklaitis and D.J. Wilde, "Geometric Programming via a Primal Auxiliary Problem," AIIE Trans. 6, 308-317, (1974). Y. Friedman and G.V. Reklaitis, "Flexible Solutions to Linear Programs Under Uncertainty: Inequality Constraints," AIChE J., 21, 77-83, (1975). Y. Friedman and G.V. Reklaitis, "Flexible Solutions to Linear Programs Under Uncertainty: Equality Constraints," AIChE J., 21, 83-90, (1975). D.R. Schneider and G.V. Reklaitis, "On Material Balances for Chemically Reacting Systems," Chem. Eng. Sci., 30, 243-247, (1975). G.V. Reklaitis and D.T. Phillips, "A Survey of Non-Linear Programming," AIIE Trans. 7, Special issue, "Operations Research Methodologies, State-of-the-Art," 235-256, (1975).

Phillips, D.T. and G.V. Reklaitis, "On Geometric Programming with Slack Constraints and Degrees of Difficulty," AIIE Trans.8, 275, (1976).

Embury, M.C., G.V. Reklaitis and J.M. Woods, "Scheduling and Simulation of a Stated Semicontinuous Multiproduct Process," Proceedings, the Second Pacific Chem. Engr. Congress, Vol. II, 883-890, August, 1977.

Sarma, P.V.L.N., X.M. Martens, G.V. Reklaitis and M.J. Rijckaert, "A Comparison of Computational Strategies for Geometric Programs," Journal of Optimization Theory and Applications, 26, No. 2, 1978.

Overturf, B.W., G.V. Reklaitis and J.M. Woods, "GASP IV and the Simulation of Batch/Semicontinuous Operations: Parallel Process," I&EC Process Design and Development, 17, 166, 1978.

Overturf, B.W., G.V. Reklaitis and J.M. Woods, "GASP IV and the Simulation of Batch/Semicontinuous

Operations: Single Train Process," I&EC Process Design and Development, 17, 161, 1978.

10

Sood, M. and G.V. Reklaitis, "Solution of Material Balances for Flowsheets Modelled with Elementary Modules:

The Constrained Case," AIChE Journal, 225, 209, 1979.

Sood, M., G.V. Reklaitis and J.M. Woods, "Solution of Material Balances for Flowsheets Modelled with Elementary

Modules: The Unconstrained Case," AIChE Journal, 25, 220, 1979.

McLane, M., M.K. Sood and G.V. Reklaitis, "A Hierarchical Strategy for Large Scale Process Calculations,"

Computers and Chemical Engineering, 3, 383-394, 1979.

Kayihan, F. and G.V. Reklaitis, "Modelling of Staged Fluidized Bed Pyrolysis Reactors," I&EC Process Design and

Development, 19, 15-23, 1980.

Sood, M.K., T. Wang and G.V. Reklaitis, "Computer Aided Drawing II: Stream Layout and Drawing," Computers

and Chemical Engineering, 5, No. 4, 1981.

Curtis, B., M.K. Sood and G.V. Reklaitis, "Computer Aided Flowsheet Drawing I: Equipment Layout," Computers

and Chemical Engineering, 5, No. 4, 1981.

Sin, Y.T. and G.V. Reklaitis, "On the Computational Utility of Generalized Geometric Programming Solution Methods: Review and Test Procedure Design," Progress in Engineering Optimization - 1981, R.W. Mayne and K.M. Ragsdell (eds.), ASME, New York, 1981. Sin, Y.T. and G.V. Reklaitis, "On the Computational Utility of Generalized Geometric Programming Solution Methods: Results and Interpretation," Progress in Engineering Optimization - 1981 R.W. Mayne and K.M. Ragsdell (eds), ASME, New York, 1981. Knopf, F.C., Okos, M.R., and G.V. Reklaitis, "Optimal Design of Batch/Semicontinous Processes," I&EC Process

Design and Develpment, 21, 79 (1982). Fattler, J.E., Y.E. Sin, R.R. Root, K.M. Ragsdell and G.V. Reklaitis, "On the Computational Utility of Posynomial Geometric Programming Solution Methods," Mathematical Programming, 22, 163-201, 1982. Sarma, P.V.L.N. and G.V. Reklaitis, "Optimization of a Complex Chemical Process Using an Equation Oriented Model," Mathematical Programming: Study on Applications, 25, 113-160 (1982). Reklaitis, G.V., "Review of Scheduling of Process Operations," AIChE Symp. Ser., 78, No. 214, 119-133 (1982). Karimi, I. and G.V. Reklaitis, "Optimal Selection of Intermediate Storage Tank Capacity in a Periodic Batch/Semicontinuous Process," AIChE J., 29, 588, (1983). Overturf, B.W. and G.V. Reklaitis, "A Fluidized Bed Reactor Model with Generalized Particle Balances; Part 1:

Formulation and Solution," AIChE J., 29, 813, (1983). Overturf, B.W. and G.V. Reklaitis, "A Fluidized Bed Reactor Model with Generalized Particle Balances; Part 2:

Coal Combustion Application," AIChE J., 29, 820 (1983).

Joglekar, G., S. Clark and G.V. Reklaitis, "Boss: A Process Simulator for Non Continuous Operations," Proceedings 3rd International Congress Computers & ChE, SCI, Paris, C161-1 (1983).

Shah, S., M.R. Okos, and G.V. Reklaitis, "A Multi-Time Period Production Planning Model for Food Processing Plants," Proceedings 3rd International Congress Computers & ChE, SCI, Paris, P160-1 (1983).

Shah, S.A., M.R. Okos and G.V. Reklaitis, "A Linear Programming Model of a Meat Processing Plant," Trans,

ASAE, 1584, 26 (1983).

Shah, S.A., M.R. Okos and G.V. Reklaitis, "Simulation of a Sausage Manufacturing Plant," Trans. ASAE, 635, 25 (1983).

11

Petroulas, T. and G.V. Reklaitis, "Computer Aided Synthesis and Design of Plant Utility Systems," AIChE J., 69, 30

(1984).

Knopf, C., M. Okos, and G.V. Reklaitis, "Combined Design and Scheduling of Regenerative Noncontinuous Processes," IEC Proc. Des Develop. 23, 522-528 (1984).

Clark, S. and G.V. Reklaitis, "Investigation of Strategies for Executing Constrained Sequential Modular

Simulations," Computers & Chem; Engng. Vol. 8, 205-218 (1984).

Joglekar, G. and G.V. Reklaitis, "A Simulator for Batch and Semicontinuous Processes," Computers & Chem.

Engng. Vol. 8, 315-327 (1984).

Karimi, I. and G.V. Reklaitis, "Intermediate Storage in Noncontinuous Processing," Proceedings Foundations of

Computer Aided Process Design - 83, Westerberg and Chien (eds.), CACHE Corp. 425-472, (1984).

Roettger, B., M.R. Okos and G.V. Reklaitis, "A Prototype Process Engineering Workstation," CEP 47, 80 (1984).

Karimi, I. and G.V. Reklaitis, "Analysis of Intermediate Storage in Noncontinuous Processes Involving Stages of Parallel Units," AIChE J., 31, 44-52 (1985). Karimi, I.A. and G.V. Reklaitis, "Deterministic Variability Analysis for Intermediate Storage in Noncontinuous Processes, Part I: Allowability Conditions," AIChE J. 31, 1516-1527, (1985). Karimi, I.A. and G.V. Reklaitis, "Deterministic Variability Analysis for Intermediate Storage in Noncontinuous Processes, Part 2: Storage Sizing for Serial Systems," AIChE J., 31, 1528-1537 (1985). Kuriyan, K. and G.V. Reklaitis, "Approximate Scheduling Algorithms for Network Flowshops," I. Chem. Eng.

Symp. Series, Vol. 92, 79-90 (1985). Karimi, I.A. and G.V. Reklaitis, "Variability Analysis for Intermediate Storage in Noncontinuous Processes: Stochastic Case," I. Chem. Eng. Symp. Series, 92, 663-674 (1985). Okos, M.R. and G.V. Reklaitis, "Computer Aided Design and Operation of Food Processes in Industry and Academia," Food Technology, 39, pp. 107-118 (1985). Shah, S.A., Okos, M.R. and G.V. Reklaitis, “Production Scheduling in food processing plants”, Trans. ASAE, 2078, 28 (1985). Cuille, P.E. and G. Reklaitis, "Dynamic Simulation of Multicomponent Batch Rectification with Chemical Reaction," Computers & Chem. Engng., 10, 389-398 (1986).

Kuriyan K., W. Wiede, Jr. and G.V. Reklaitis, "Determination of Completion Times for Serial Multi-Product Processes, Part 1: Two Unit Finite Intermediate Storage System," Computers & Chem. Engng., 11, 337-344,

(1987).

Wiede, W.J., Jr. and G.V. Reklaitis, "Determination of Completion Times for Serial Multi- Product Processes, Part 2: Multiunit Finite Intermediate Storage System," Computers & Chem. Engng., 11, 345-356 (1987).

Wiede, W., Jr. and G.V. Reklaitis, "Determination of Completion Times for Serial Multiproduct Processes, Part 3: Mixed Intermediate Storage System," Computers & Chem. Engng., 11, 357-368, (1987).

Kuriyan, K., G.Joglekar and G.V. Reklaitis, "Multiproduct Plant Scheduling Studies Using BOSS," Ind. Engng.

Chem. Res., 26, 1551-1558 (1987).

N.C. Yeh and G.V. Reklaitis, "Synthesis and Sizing of Batch/Semicontinuous Processes: Single Product Plants," Computers & Chem. Engng., 11, 639-654, (1987).

12

Kuriyan, K. and G.V. Reklaitis, "Scheduling Network Flowshops so as to Minimize Makespan," Computers &

Chem. Engng. 13, 187-200, (1989).

Wellons, M.C. and G.V. Reklaitis, "Optimal Schedule Generation for a Single Product Production Line, Part 1: Problem Formulation," Computers & Chem. Engng. 13, 201-212, (1989).

Wellons, M.C. and G.V. Reklaitis, "Optimal Schedule Generation for a Single Product Production Line, Part 2:

Identification of Dominant Unique Path Sequences," Computers & Chem. Engng. 13, 213-228, (1989).

Wellons, H.S. and G.V. Reklaitis, "The Design of Multiproduct Batch Plants under Uncertainty with Staged

Expansion," Computers & Chem. Engng. 13, 115-126, (1989).

Lee, E.S. and G.V. Reklaitis, "Intermediate Storage and the Operation of Periodic Processes under Equipment

Failure," Proceedings of PSE'88, Institution of Chemical Engineers (Australia) pp. 263-269, 1988. Also, Special

Issue Computers & Chem. Engng. 13, No. 11/12 (1989).

Lee, E.S. and G.V. Reklaitis, "Intermediate Storage and Availability of Batch processes under Batch Failure", Proceedings of CHEMDATA 88, Royal Swedish Academy of Engineering Sciences, pp. 302-308, 1988. also, Special Issue of Computers & Chemical Engng., 13, 491-498 (1989). Lee, I.B. and G.V. Reklaitis, "Towards the Synthesis of Global Optimum Heat Exchanger Networks: The Unpinched Case", Chem. Engng. Comm. 75, 57-88 (1989). Young, R.A., and G.V. Reklaitis, "Capacity Expansion Study of a Batch Production Line", Ind. Engng. Chem. Res., 28, 771-778 (1989). Wellons, H.S., and G.V. Reklaitis, "The Design of Multiproduct Batch Plants under Uncertainty with Staged Expansion, II", DECHEMA Monographs, Computer Appl. in the Chemical Industry, 116, 285-292 (1989). Tsirukis, A., G.V. Reklaitis, and M.F. Tenorio, "Nonlinear Optimization using Generalized Hopfield Networks," Neural Computation I, No. 4 (1990). Reklaitis, G.V., "Progress and Issues in Computer Aided Batch Process Design," in Computer Aided Process Design

III, J. Siirola, I. Grossmann, and G. Stephanopoulos (eds), CACHE-Elsevier, 1990 , pp. 241-275, (1990). Reklaitis, G.V. and M.L. Preston, "A Perspective on Computer Integrated Process Engineering", I. Chem. Eng.

Symp. Series, No. 114, pp. 315-331, (1990). Papageorgaki, S. and G.V. Reklaitis, "Optimal Design of Multipurpose Batch Plants - I. Problem Formulation," Ind. Eng. Chem. Res. 29, pp. 2054-2061 (1990).

Papageorgaki, S., and G.V. Reklaitis, "Optimal Design of Multipurpose Batch Plants - II. A Decomposition Solution Strategy," Ind. Eng. Chem. Res. 29, 2062-2073 (1990).

Wellons, M.C. and G.V. Reklaitis, "Scheduling of Multipurpose Batch Chemical Plants, Part 1: Formation of Single Product Campaigns", Ind. Eng. Chem. Res. 30, 671-688 (1991).

Wellons, M.C. and G.V. Reklaitis, "Scheduling of Multipurpose Batch Chemical Plants, Part 2: Multiple-Product Campaign Formation and Production Planning," Ind. Eng. Chem. Res. 30, 688-705 (1991).

Squires, R.G., G.V. Reklaitis, N.C. Yeh, J.B. Mosby, I.A. Karimi, and P.K. Andersen, "Purdue-Industry Computer Simulation Modules - The Amoco Resid Hydrotreater Process," Chem. Eng. Ed., 32, 98-101 (1991).

Pekny J.V., V. Venkatasubramanian, and G.V. Reklaitis, “Prospects for Computer Aided Process Operations in the

Process Industries”, in L. Puigjaner and A. Espunia (eds), Computer-aided Process Engineering-91, European Federation of Chemical Engineering, Barcelona, Spain, (1991).

13

Squires, R.G., P.K. Andersen, G.V. Reklaitis, S. Jayakumar, and D.S. Carmichael, "Multi-media Based Educational

Applications of Computer Simulations of Chemical Engineering Processes," Compt. Appns. Engr. Educ., 1 (1) 25-

32, (1992).

Tsirukis, A.G., S. Papageorgaki, and G.V. Reklaitis, "Scheduling of Multipurpose Batch Chemical Plants with

Resource Constraints", Ind. Eng. Chem. Res. 32, 3037-3050 (1993).

Jayakumar, S., R.G. Squires, G.V. Reklaitis, P.K. Andersen, B.C. Choi, and K.R. Graziani, "The Use of Computer

Simulations in Engineering Capstone Courses: A Chemical Engineering Example - the Mobil Catalytic Reforming

Process Simulation," Int. J. Engr. Educ. 9, 243-250 (1993).

Tsirukis, A.G. and G.V. Reklaitis, "Feature Extraction Algorithms for Constrained Global Optimization, I:

Mathematical Foundations," Special Issue, Annals of Operations Research 42, 275-312 (1993).

Tsirukis, A.G. and G.V. Reklaitis, "Feature Extraction Algorithms for Constrained Global Optimization, Part II:

Batch Process Scheduling Applications," Special Issue, Annals of Operations Research 42, 275-312 (1993).

Papageorgaki, S. and G.V. Reklaitis, "Retrofitting in General Multipurpose Batch Chemical Plant," Ind.Eng.Chem.

Res, 32, 345-361 (1993). Jayakumar, S., R.G. Squires, G.V. Reklaitis, P.K. Andersen, and L. Partin, "Purdue-Industry Computer Simulation Module II: Eastman Chemical Reactive Distillation Process", Chemical Engineering Education, 27 (2), 136-139 (1993). Tsirukis, A.G., and G.V. Reklaitis, "Application of Generalized Hopfield Networks to Discrete Nonlinear Optimization Problems," Computers & Chem. Engng., 18, 459-468 (1994). Kanakamedala, K., G.V.Reklaits and V. Venkatasubramanian, "Reactive Schedule Modifications in Multipurpose Batch Chemical Plants," Ind. Eng. Chem. Res. 33, 77-90 (1994). G. Kudva, A. Elkamel, J.F. Pekny and G.V. Reklaitis, "A Heuristic Algorithm for Scheduling Multiproduct Plants with Production Deadlines, Intermediate Storage Limitations, and Equipment Changeover Costs," Computers &

Chem. Engng. 18, 859-876 (1994). Jayakumar, S., and G.V. Reklaitis, "Chemical Plant Layout Via Graph Partitioning Part I, Single Level," Computers

& Chem. Engng., 18, 441-458 (1994). Subrahmanyam, S., J.F. Pekny, and G.V. Reklaitis, "Design of Batch Chemical Plants under Uncertainty," Ind. Eng.

Chem. Res. , 33, 441-458 (1994).

Zentner, M.G., J.F. Pekny, G.V. Reklaitis and J.N.D. Gupta, "Practical Considerations in Using Model Based Optimization for the Scheduling and Planning of Batch/Semicontinuous Processes", J. Process Control, special issue on Batch Processing, 5, No.4 , 259-280 (1994)

Yi, G. and G.V. Reklaitis, "Model-Based Feedback Inventory Controller for Intermediate Storage in Batch Processes," J. Process Control, special issue on Batch Processing, 5, No. 4 , 227-237 (1994)

Reklaitis, G.V., “Computer-aided Design and Operation of Batch Processes”, Chem.Eng.Ed., 29, pp. 76-85 (1995) (text of Award Lecture).

Reklaitis, G.V., “ Scheduling approaches for the Batch Process Industries”, ISA Transactions, 34, pp. 349-358 (1995)

Jayakumar, S., R.G. Squires, G.V. Reklaitis, P.K. Andersen, and B.K. Dietrich, "The Purdue-Dow Styrene

Butadiene Polymerization Simulation", Int. J. Eng. Educ. 84, 271-277 (1995).

14

Androulakis, I. and G.V. Reklaitis, "Analysis of the Spurious Behavior of Asynchronous Relaxation Algorithms,"

Computers & Chem. Engng. 19, pp.827-845 (1995).

Lee, B. and G.V. Reklaitis, "Optimal Scheduling of Batch Processes for Heat Integration: I: Basic Formulations,"

Computers & Chem. Engng., 19, 827-845 (1995).

Lee, B. and G.V. Reklaitis, "Optimal Scheduling of Batch Process for Heat Integration: II: Extended Problems,"

Computers & Chem. Engng., 19, 867-882 (1995).

Yi, G. and G.V. Reklaitis, “Reducing the Effects of Failure Propagation in Periodic Processes involving Intermediate

Storage with Multiple Input/Multiple Output Streams”, Korean J. of Chem. Eng. ,12, pp.123-131 (1995).

Reklaitis, G.V., "Overview of Scheduling and Planning of Batch Process Operations," in Batch Processing Systems

Engineering, Reklaitis, Rippin, Hortacsu and Sunol (eds), Springer Verlag, NATO ASI Series F, Vol. 143, 1996,

660-705.

Reklaitis, G.V., "Future Directions for R&D in Batch Process Engineering," in Batch Processing Systems

Engineering, Reklaitis, Rippin, Hortacsu and Sunol (eds), Springer Verlag, NATO ASI Series F, Vol. 143, 1996, 20-42. Papageorgaki, S., A.G. Tsirukis and G.V. Reklaitis, "The Influence of Resource Constraints on the Retrofit Design of Multipurpose Batch Chemical Plants," in Batch Processing Systems Engineering, Reklaitis, Rippin, Hortacsu and Sunol (eds), Springer Verlag, NATO ASI Series F, Vol. 143, 1996, 150-173. Zentner, M.G., and G.V. Reklaitis, "An Exact MILP Formulation for the Scheduling of Resource Constrained Batch Chemical Processes," in Batch Processing Systems Engineering, Reklaitis, Rippin, Hortacsu and Sunol (eds), Springer Verlag, NATO ASI Series F, Vol. 143, 1996, 779-807. Jayakumar, S. and G.V.Reklaits, "Chemical Plant Layout via Graph Partitioning, Part II: Multiple Levels", Computers & Chem. Engng. 20, 563-778, (1996). Reklaitis, G.V. and L.B. Koppel, "Role and Prospects for Intelligent Systems in Integrated Process Operations", in Intelligent Systems in Process Engineering , G. Stephanopoulos, V. Venkatasubramanian, and J. Davis (eds), AIChE Symposium Series No. 132, 71-84, (1996). Mockus, L., and G.V. Reklaitis, "A New Global Optimization Algorithm for Batch Process Scheduling", in State of

the Art in Global Optimization: C.A. Floudas and P.M.Pardalos (eds), Kluwer Academic Publishers, 1996, pp. 521-538. Bassett, M.H., F.J. Doyle III, G.K. Kudva, J.F. Pekny, G.V. Reklaitis, S. Subrahmanyam, M.G.Zentner, and D.L. Miller, "Perspectives on Model Based Integration of Process Operations", Computers & Chem. Engng, Vol. 20, No.

6/7, pp. 821-844, (1996).

Subrahmanyam, J.F. Pekny, and G.V. Reklaitis, "Decomposition Approaches to Batch Design and Planning", I&EC

Research, 35, 1866-1876 (1996).

Squires, R.G., K. Kuriyan, S. Jayakumar, G.V. Reklaitis, M. Evans, B. Morrato, and R. Gutwein, "An Industry Based Multimedia Instruction Module - the Procter and Gamble Decaffeination Process", Comput. Appl. Eng. Educ.,

4, 269-274 (1996). Bassett, M.H., J.F. Pekny, and G.V. Reklaitis, "Decomposition Techniques for the Solution of Large-Scale

Scheduling Problems," AIChE Journal, Vol. 42, No. 12, pp. 3373-3387, (1996).

Elkamel, A., M. Zentner, J.F. Pekny, and G.V. Reklaitis, "A Decomposition Heuristic for Scheduling the General Batch Chemical Plant", Eng.Opt., 28, 299-330 (1997)

15

Wajge, R., J.M. Wilson, J.F. Pekny, and G.V. Reklaitis, "Investigation of Numerical Solution Approaches to

Multicomponent Batch Distillation in Packed Beds", I&EC Research, 36, 1738-1748 (1997).

Bassett, M., J.F. Pekny, and G.V. Reklaitis, "Using Detailed Scheduling to Obtain Realistic Operating Policies for a

Batch Processing Facility", I&EC Research, 36, 1717-1726 (1997).

Mockus, L. and G.V. Reklaitis, "A Bayesian Approach to Batch Process Scheduling", Intl. Trans. Operational

Research, 4, pp. 55-65 (1997).

Mockus, L. and G.V. Reklaitis, "Mathematical Programming Formulation for Scheduling of Batch Operations Based

on Nonuniform Time Discretization", Computers & Chem. Engr., 21, No. 10, pp. 1147-1156 (1997).

Applequist, G., O. Samikoglu, J.F. Pekny, and G.V. Reklaitis, "Issues in the Use, Design, and Evolution of Process

Scheduling and Planning Systems", ISA Transactions, 36, No. 2, pp. 81-121 (1997).

Zentner, M.G., A. Elkamel, J.F. Pekny, and G.V. Reklaitis, "A Language for Describing Process Scheduling

Problems", Computers & Chem. Engr., 22, No.1-2. pp. 125-145 (1998).

Wajge, R. and G.V. Reklaitis, "An Optimal Campaign Structure for Multicomponent Batch Distillation with Reversible Reaction", I&EC Research, 37, 1910-1916 (1998) Pekny, J.F., and G.V. Reklaitis, "Towards the Convergence of Theory and Practice: A Technology Guide for Scheduling/Planning Methodology", in Foundations of Computer Aided Process Operations 1998, AIChE Symposium Series No. 320, vol.94, 91-111, (1998) Androulakis, I.P. and G.V. Reklaitis, “Approaches to Asynchronous Decentralized Decision Making”, Computers &

Chem. Engr, 23, 339-355(1999). Mockus, L. and G.V. Reklaitis, “Continuous Time Representation Approach to Batch and Continuous Process Scheduling - I. MINLP Formulation”, I&EC Research, 38, 197-203 (1999) Mockus, L. and G.V. Reklaitis, “Continuous Time Representation Approach to Batch and Continuous Process Scheduling - II. Computational Issues”, I&EC Research, 38, 204-210 (1999) Honkomp, S.J., L. Mockus, and G.V. Reklaitis,"A Framework for Schedule Evaluation with Processing Uncertainty", Computers & Chem. Engr, 23, 595-609 (1999).

Kuriyan, K., R.G. Squires, G.V. Reklaitis, B. Morrato, R. Gutwein, and M. Evans, “The Procter and Gamble Decaffeination Project II. Implementing a Multimedia Instruction Module in Java”, Comp. Appl. Engr. Edu., 7, 87-98 (1999)

Wajge, R.M., and G.V. Reklaitis, "RBDOPT: A General-Purpose Object-Oriented Module for Distributed Campaign Optimization of Reactive Batch Distillation", Chem.Eng. J., 75, 57-68(1999)

Yi, G. and G.V. Reklaitis, “Optimal Design of Multiple Batch Units with feedstock/Product Storages”, Chem. Eng.

Comm. 181, 79-106 (2000).

Reklaitis, G.V., “Overview of Planning and Scheduling Technologies”, Latin American Appld Res., 30, 285-293

(2000) (ENPROMER-99 Plenary & Keynote Lectures) Huang, Y., G.V. Reklaitis, and V. Venkatasubramanian, “Dynamic Optimization-based Fault Accommodation”,

Computers & Chem. Engr, 24 , 439-444 (2000).

Subramanian, D., J.F. Pekny, and G.V. Reklaitis, “A simulation-optimization framework for addressing combinatorial and stochastic aspects of an R&D pipeline management problem”, Computers & Chem. Engr, 24 ,

1005-1012 (2000).

16

Lee, H.-K., Lee, I.-B., and G.V. Reklaitis, “Capacity Expansion Problem of Multisite Batch Plants with Production

and Distribution”, Computers & Chem. Engr, 24 , 1597-1602 (2000).

Applequist, G.E., J.F. Pekny, G.V. Reklaitis, “Risk and Uncertainty in Managing Chemical Manufacturing Supply

Chains”, Computers & Chem. Engr, 24 , 2211-2222 (2000).

Huang, Y., G.V. Reklaitis, and V. Venkatasubramanian, “A Wavelet Shrinkage-based Covariance Matrix Estimation

for Process Measurements”, European Symposium on Computer-Aided Process Engineering –11, Computer Aided

Chemical Engineering Series Vol.9, pp. 669-674 (2001)

Subramanian, D. J.F. Pekny, and G.V. Reklaitis, “SIM-OPT: a computational architecture to address valuable

business aspects of R&D Pipeline Management”, European Symposium on Computer-Aided Process Engineering –

11, Computer Aided Chemical Engineering Series Vol.9, pp. 1101-1108 (2001)

Applequist, G. , J.F. Pekny, and G.V. Reklaitis, “Approaches to Risk and Uncertainty in Chemical Manufacturing

and Supply Chains”, 5th

Italian Conference on Chemical and Process Engineering, AIDIC, Vol.1, pp.257-262 (2001)

Subramanian, D. J.F. Pekny, and G.V. Reklaitis, “A Simulation-Optimization Framework for Research and Development Pipeline Management”, AIChE Journal, Vol.47, No. 10, pp.2226-2242 (2001) Puigjaner, L., A. Espunia and G.V. Reklaitis, “Frameworks for Discrete /Hybrid Production Systems”, in B. Braunschwieg (ed), Software Architectures and Tools for Computer Aided Process Engineering, Computer Aided Chemical Engineering Series, vol 11, pp. 663-700, (2002). Puigjaner, L., M. Graells, and G.V. Reklaitis, “Computer Tools for Discrete/Hybrid Production Systems”, in B. Braunschwieg (ed), Software Architectures and Tools for Computer Aided Process Engineering , Computer Aided Chemical Engineering Series, 11, pp. 433-452, (2002). Huang, Y., G.V. Reklaitis and V. Venkatasubramanian, “Model Decomposition Based Method for Solving General Dynamic Optimization Problems”, Computers & Chem. Engr 26, 863-873 (2002). Huang, Y., G.V. Reklaitis and V. Venkatasubramanian, “A Model Based Fault Accommodation System”, I&EC

Research, 41, 3806-3821 (2002). Yi, G. and G.V. Reklaitis, ”Optimal Design of Batch Storage Network using Periodic Square Wave Model”, AIChE

Journal, Vol.48, No. 8, 1737-1753 (2002). Subramanian, D. J.F. Pekny, G.V. Reklaitis, "Simulation-Optimization Framework for Stochastic Optimization of R&D Pipeline Management", AICHE Journal, Vol. 49, No. 1, pp. 96-112 (2003). Varma, V., J.F. Pekny, and G.V. Reklaitis, “An XML–based language for the Research and Development Pipeline

Management Problem”, Computers & Chem. Engr, 27 ,pp.1361-1380 (2003) Huang, Y., G.V. Reklaitis, and V. Venkatasubramanian, “A Heuristic EKF based Estimator for Fault Identification

in Fluid Catalytic Cracking Unit”, I&EC Research, 42,3361-3371(2003)

Huang, Y., G.V. Reklaitis, and V. Venkatasubramanian, “Wavelet shrinkage Based Measurement Error Covariance Matrix Estimation”, Computers & Chem. Engr, 27, (2003), (under revision).

Yi, G. and G.V. Reklaitis, ”Optimal Design of Batch Storage Networks with Recycle Streams”, AIChE Journal, Vol 49, No. 12, pp. 3084-3094 (2003)

Subramanian. Y.. X. Wan., J.F. Pekny and G.V. Reklaitis. ““A Computational Framework for Supply Chain

Analysis”, Chemical Engineering Transactions (AIDIC) 3, pp.1075-1080 (2003)

Jung, J.Y., Blau, G., Pekny, J.F., Reklaitis, G.V., and Eversdyk, D., “A Simulation-based Optimization Approach to Supply Chain Management under Demand Uncertainty”, Computers & Chem Engr, 28 2087-2106 (2004)

17

Yi, G. and G.V. Reklaitis, “Optimal Design of Batch-Storage Network with Financial Transactions and Cash Flows”,

AIChE Journal, Vol 50, No. 11, pp. 2849-2965 (2004)

Wan, X, J.F. Pekny, and G.V. Reklaitis, “Simulation-based Optimization with Surrogate Models – Application to Supply Chains”, Computers & Chem Engr, 29, pp.1317-1328 (2005)

Kuriyan, K., W. Muench, and G.V. Reklaitis,”The Dow Chemical Project: Creating a Web-based Interface to a

Dynamic Simulation”, Comp. Appl. Engr. Ed., 13 pp.250-256 (2006)

Yi, G. and G.V. Reklaitis, “Optimal Design of Batch-Storage Network for Multi-tasking Semicontinuous Processes”,

AIChE Journal, Vol 52, pp. 269-281 (2006)

Venkatasubramanian, V., C-H Zhao, G. Joglekar, A. Jain, L. Hailemariam, P. Suresh, P. Akkisetty, K. Morris and

G.V. Reklaitis, “Ontological informatics infrastructure for pharmaceutical product development and manufacturing”,

Computers & Chem Engr, 31 Special Issue: Selected Papers of CPC VII,, pp. 1482-1496 (2006)

Yi, G. and G.V. Reklaitis, “Optimal Design of Batch-Storage Network with Uncertainty and Waste Treatment, “AIChE Journal, Vol 52, pp. 3473-3490 (2006) Hlinak,A., Kuriyan, K, , K. Morris, G.V. Reklaitis and P. Basu and, “Understanding Critical Material Properties for

Solid Dosage Form Design” Journal of Pharm. Innovation, Vol 1, No.1, pp. 12-18 (2006) (Perspective) C.-H Zhao, A. Jain, L. Hailemariam, P.Suresh, P.Akkisetti, G. Joglekar,V. Venkatasubramanian,

G.V.Reklaitis, K. Morris, P. Basu, ” “Towards Intelligent Decision Support for Pharmaceutical Product

Development”, Journal of Pharm. Innovation, Vol 1, No. 1, pp.23-36 (2006)

Varma, V.A., G.E. Blau, J.F. Pekny and G.V. Reklaitis, “Enterprise-wide Modeling and Optimization: An Overview of Emerging Research Challenges and Opportunities”, Computers & Chem Engr, 32. Special Issue: Selected Papers

of ESCAPE 15, pp. 692-711 (2007)

Yi, G. and G.V. Reklaitis, “Optimal Design of Batch-Storage Network Considering Exchange Rates and Taxes”, AIChE Journal, Vol 53, (in press) (May 2007 issue)

Zapata, J.C.

., V.A. Varma, and G. V. Reklaitis, “Impact of Tactical and Operational Policies in the Selection of a

New Product Portfolio”, Computers & Chem Engr, 32. Special Issue: Selected Papers of PSE 2006/ESCAPE 16, (2007) (in press)

Other publications Reklaitis, G.V. and J.M. Woods, "Optimization of a Non-ideal Staged Compression Facility," Proceedings, 1974

Purdue Compressor Technology Conference, (W. Soedel, ed), Purdue University, 415-422, July, 1974.

Reklaitis, G.V. and J.M. Woods, "Coal Conversion Plant Computer Simulation," Proc. of Conference on

Mathematical Modelling of Coal Conversion Processes, M. J. Biallas (ed), CONF-761104, 78-94, (November, 1976).

Embury, M.C., G.V. Reklaitis and J.M. Woods, "Simulation of the Operation of a Staged Multiproduct Process with Limited Interstage Storage Buffers," Proc. 9th Hawaii Intern'l. Conf. Syst. Sci. 348, (1976).

Reklaitis, G.V., R.S.H. Mah and T.F. Edgar, "Computer Graphics in the ChE Curriculum," ASEE/NSF Position

Paper and CACHE Report (Spring, 1983), also Engineering Education 147, 74 (1983). Karimi, I., R.G. Squires and G.V. Reklaitis, "Purdue-Industry Joint Development of Chemical Process Engineering

Laboratory Modules," Proceedings, 1983 Frontiers in Education Conference, ASEE, Washington, D.C.

18

Reklaitis, G.V. "Review of 'Foundations of Computer Aided Chemical Process Design'," Computers & Chem.

Engng. 8, 143-144 , (1984).

Edgar, T.F., R.S.H. Mah and G.V. Reklaitis, "The Use of Computers in Chemical Engineering Education," Chem.

Eng. Progr., 81, 9-12, (1985).

Biegler, L., B. Carnahan, J.D. Seader and G.V. Reklaitis, "CACHE and the Dissemination of Software for ChE

Education," Proceedings of UPCAEDM'87, Ohio State University, ASME, 1987.

Edgar, T.F., R.S.H. Mah, G.V. Reklaitis and D.M. Himmelblau, "The CACHE Corporation and Educational

Software for Chemical Engineers," Chem Tech, 1987, 18, No. 5, 277-283, (1988).

Andersen, P.K., R.G. Squires, G.V. Reklaitis, and D. S. Carmichael,"Purdue-Industry ChE Laboratory Modules, "

Proceedings of ASEE Annual Meeting, pp.981-984 (1991).

Andersen, P.K., R.G. Squires, and G.V. Reklaitis, "Computer Simulations in Chemical Engineering Education, "

Proceedings of the Frontiers in Education Conference, ASEE, pp.30-31 (1992).

Andersen, P.K., R.G. Squires and G.V. Reklaitis, "Computer Simulations in the Chemical Engineering Laboratory", Proceedings of the 1992 IEEE-APS Joint Symposium, (1992). Davis, J.M., G.E. Blau, and G.V. Reklaitis, “Computers in Undergraduate Chemical Engineering Education: A Perspective on Training and Application”, Chem. Eng. Ed., 29, pp. 26-31 (1995). Jayakumar, S., R.G. Squires, G.V. Reklaitis, and K.S. Grassi, “Simulating the Air Products Cryogenic Hydrogen Reactive Cooling Process,” Chem.Eng. Ed., 29, pp.26-31 (1995). Reklaitis, G.V., "R&D collaboration around the world", CHEMTECH , 27, pp. 10-15 (1997). Reklaitis, G.V., and K. Bartels, “Does US Graduate Education Work for the Chemical Industry”, CHEMTECH , 29, pp. 7-15 (1999). Edgar, T.F., D.A. Dixon, and G.V. Reklaitis, “ Vision 2020: Computational Needs of the Chemical Industry”, Report of National Research Council Workshop on Impact of Advances in Computing and Communications Technologies on Chemical Science and Technology, National Academy Press, pp.74-90 (1999)

SEMINARS AND PRESENTATIONS Seminars a) Academic

Auburn University, Feb, 1994; Feb. 2001 California Institute of Technology, May, 1984 Carnegie Mellon University, Dec., 1982, April 1993, May 2004 (Westerberg Symposium)

Case Western Reserve University, Oct., 1984

Columbia University, Oct., 1984 Georgia Institute of Technology, Oct., 1986 Illinois Institute of Technology, Chicago, Nov., 1983

Imperial College, University of London, Sept. 2000 Indian Institute of Technology, Bombay, India, June, 1983 Indian Institute of Technology, Kanpur, India, June, 1983

Kyoto University, Kyoto, Japan, May, 1983 Lehigh University, April, 1977

Lithuanian Academy of Sciences, Vilnius, USSR Institute of Chem.&Chem. Technology, March, 1980 (series)

Institute of Mathematics and Cybernetics, April, 1980 (series) Institute of Agricultural Economics, April, 1980

19

Louisiana State University, Baton Rouge, LA, Feb., 1986

Massachusetts Institute of Technology, March, 1987; Oct. 1997

McMaster University, Hamilton, Canada, May, 1999

National University of Singapore, Jan 2004 ( 2 lectures)

North Carolina State University, Sept., 1985 Northwestern University, Oct.,1981, Jan. 1997

Ohio State University, May, 1998.

Oklahoma State University, Feb. 2000

Pennsylvania State University, Feb., 1983

Polytechnic University of Catalunya, Barcelona, Spain, May 1987;

June 1994; July 1997; June 2001. May 2004

Politechnic Institute of Milan, Italy, Oct.1973

Princeton University, Nov., 1986

Seoul National University, Korea, June 1999

Stanford University, May, 1986

Texas A&M University, Jan. 1992

Tianjin University, Tianjin, China, May, 1997.

Tulane University, January, 2002 University of Akron, March, 1986 University of Arizona, May, 2006 University of California, Davis, May, 1984

University of California, Los Angeles, Feb. 1998. University of California, Santa Barbara, Feb 2004

University of Cincinnati, Feb., 1987, Sept. 1996 University of Coimbra, Portugal, April, 1993 University of Delaware, May, 1988 University of Florida, Oct. 1989 University of Illinois at Chicago, Feb. 1988 University of Illinois, Champaign, April, 1979 University of Maryland, May, 1989, Feb. 1991, Oct. 2000 University of Massachusetts, Amherst, April, 1985 University of Michigan & Michigan State University, Nov. 1992 University of Pennsylvania, Oct., 1988 University of Puerto Rico, Mayaguez, Oct 2005 University of South Florida, Feb.,1984 University of Texas, Austin, Oct. 1979, Feb. 1992, May, 1998. University of Wisconsin, Madison, Nov 2005 Vilnius State University, Vilnius, USSR, Spring, 1980 (series) b) Non-academic

Air Products & Chemicals, Allentown, PA, April, 1985, Sept. 1993, Sept. 1996 BF Goodrich Technical Center, Avon Lake, Ohio, June, 1985 Chiyoda Chemical Engineering & Construction Co., Tokyo, Japan, May, 1983;

Sept.,1986

Dow Chemical Research Center: July, 1979; Jan., 1987, Aug. 1994, Dec. 1994. DuPont de Nemours & Co., Wilmington, Dec., 1985 DuPont de Nemours & Co., Philadelphia, PA, Nov. 1989

Engineers India, Ltd., New Delhi, India, June, 1983 Ethyl Corp., Baton Rouge, LA, March, 1993 Exxon R&E Corp., Dec. 1993, April 1999

Imperial Chemical Industries, Northwitch, Cheshire, England, April, 1983; May, 1985; May, 1987. Kodak Technical Center, Rochester, NY, June, 1987

Merck & Co., Rahway, NJ, April, 1982 National Chemical Laboratories, Pune, India, May, 1983

Phillips Petroleum Corp., May 1993 Regional Research Laboratories, Hyderabad, India, May, 1983

20

Rhone-Poulenc, SA, Vitry, France, April, 1982

Rohm & Haas, Bristol, PA, Dec, 1985

Rohm & Haas, Louisville, KY, April, 1986

Searle, Skokie, IL, Aug. 1995

Union Carbide Agricultural Products, RTP, NC, Sept, 1985 Union Carbide Technical Center, South Charleston, WV, Feb., 1987, April 1988, October 1989

Westvaco Corp. Charleston Research Center, Charleston, S.C., Sept. 1998

Weyerhaeuser Technical Center, Tacoma, WA, May, 1984, May 1993.

3M Technical Center, St. Paul, MN, Feb., 1986

Invited Conference Lectures "A Survey of Computational Methods for Optimization," International Symposium on Systems Engineering and

Analysis, Purdue University, Oct. 1972.

"Nonlinear Programming:State of the Art," AIIE, 2nd Annual Systems Engineering Conference, Minneapolis, MN,

Nov., 1974.

"Nonlinear Programming and Engineering Optimization of Process Designs," Symposium on the Relationship of Mathematical Optimization and Engineering Design, ORSA, Chicago, Illinois, May, 1975. "Continuing Research on the Simulation and Optimal Scheduling of Batch and Semicontinuous Processes," Symposium on Impact of Computers in the Chemical Industries, World Congress of Chemical Engineering, Amsterdam, the Netherlands, June, 1976. "Optimal Design of Processes Modelled in Posynomial Functions Using Separable Programming," Ninth International Symposium on Mathematical Programming, Budapest, Hungary, August, 1976. "Coal Conversion Plant Computer Simulation," ERDA Conference on Mathematical Modelling of Coal Conversion Processes, Washington, D.C., Nov, 1976. "Synthetic Fuels from Coal and Shale," Energy for Agriculture Conference, Indiana Farm Bureau, Indianapolis, July, 1978. "Systems Studies of Coal Conversion Processes Using a Reference Simulator," 5th Annual DOE/Fossil Energy Conference on University Coal Research, Lexington, KY, August, 1978. "Can a General Purpose NLP Code find Happiness in a GP World," Special Session of the Comittee on Algorithms, Tenth International Symposium on Mathematical Programming, Montreal, August, 1979. "Review of Scheduling of Process Operations," AIChE Annual Meeting, New Orleans, Nov., 1981.

"Academic and Industrial Perspectives of Batch Process Optimization," Tutorial Lectures, ACS Kansas City Meeting, Sept., 1982.

Analysis of Intermediate Storage in Noncontinuous Processes Involving Stages of Parallel Units," Third Pacific Chemical Engineering Congress, Seoul, ROK, May, 1983.

"Intermediate Storage in Noncontinuous Processes," International Conference on Foundations of Computer Aided Process Design, Snowmass, Co., June, 1983.

"Future of Integrated Software Systems for Process Engineering," Session on CAD in Chemical Engineering, ASEE Annual Meeting, Atlanta, June, 1985.

"Uncertainty in the Design and Operation of Batch Processing Plants," Gordon Research Conference: Statistics in

Chem. and Chem. Engr., Hampton College, NH, July, 1986.

21

"Basic Concepts in Batch Process Engineering," Tutorial lecture, 1987 ASEE ChE Faculty Summer School, N.

Dartmouth, MA, August, 1987.

"Batch Process Engineering: Scheduling and Operations", ASEE Annual Conference, Portland, OR, June, 1988.

"Issues in Batch Semi-Continuous Process Scheduling", IBM Process Plant Management Conference, Houston, TX,

June, 1988.

"Progress and Issues in Computer Aided Batch Process Design", International Conference on Foundations of

Computer Aided Process Design, Snowmass, CO, July, 1989.

"A Perspective on Computer Integrated Process Engineering", keynote lecture, CIPE'89, Computer Integrated

Process Engineering, Leeds, England, September, 1989.

"Perspectives on Scheduling and Planning of Process Operations," Fourth International Symposium on Process

Systems Engineering, Montebello, Quebec, Canada, August, 1991.

"Prospects for Computer-Aided Process Operations in the Process Industries," Plenary lecture, Computer Aided Process Engineering-91, European Federation of Chemical Engineers, Barcelona, Spain, October, 1991. "Computer-Aided Engineering Applications for Batch Processing," Aspenworld-91, Cambridge, Massachusetts, November, 1991. "Overview of Scheduling and Planning of Batch Process Operations," NATO ASI Batch Processing Systems Engineering, Antalya, Turkey, May 29-June 7, 1992. "Future Directions for R&D in Batch Process Systems Engineering," NATO ASI Batch Processing Systems Engineering, Antalya, Turkey, May 29-June 7, 1992. "Computing Applications in Process Operations," CHEMPOR'93, Porto, Portugal, April 1993, Keynote Lecturer. "Scheduling and Design of Batch/Semicontinuous Processes", Plenary lecture, XII International Chemical Engineering Symposium, Monterrey, N.L., Mexico, March 2, 1994. "Perspectives on Model Based Integration of Process Operations", Plenary lecture, Fifth International Symposium on Process Systems Engineering, PSE'94, Kyongju, Korea, June 3, 1994. "Computer Aided Design and Operation of Batch Processes", ASEE Chemical Engineering Division Award Lecture, ASEE annual meeting, Edmonton, Canada, June 27, 1994. "Scheduling Approaches for the Batch Process Industries", World Batch Forum, Philadelphia, May 22-24, 1995.

"A Language for Describing Process Scheduling Problems," D.W.T. Rippin Memorial Session, 5th European Symposium on Computer Aided Process Engineering, Bled, Slovenia, June 13, 1995.

"Role and Prospects for Intelligent Systems in Integrated Process Operations", International Symposium on Intelligent Systems in Process Engineering", Snowmass, Co., July, 1995.

"The Role of Optimization Methods in Process Systems Enginering", IFORS Conference on OR in Engineering Design, St.Louis, October, 1995.

"What all Young Faculty should know about Career Planning and Development", Young Faculty Forum, AIChE Annual Meeting, Chicago, Nov. 1996.

"Batch Process Scheduling Technologies" (Tutorial with J. Pekny), World Batch Forum, Houston, Texas, April,

1997.

22

"Approaches to Planning and Scheduling under Uncertainty", Second Joint China/USA Chemical Engineering

Conference, Beijing, China, May, 1997.

"Industry-Academic Interactions and Open Standards", Panelist, Sixth International Symposium on Process Systems

Engineering, Trondheim, Norway, May, 1997.

“Practical Approaches to Planning/Scheduling under Uncertainty”, Aspenworld 97, Boston, MA, Oct. 1997.

“Decomposition Strategies in Planning and Scheduling Problems in Batch Chemical Processing”, Mitsubishi

Chemical Company, Mini-symposium on Modeling and Optimization for Operation and Management in Chemical

Plants, Santa Clara, CA, Dec, 1997.

"Trends, Opportunities & Models for Pan-American Collaboration in Process Systems Engineering", Pan American

Workshop to Promote Collaboration in Chemical Engineering, Rio de Janeiro, August 3-5, 1998

"Industry-Academia-Government Research Partnering: University Perspective", ChemVision 98, Houston, TX,

September 23, 1998.

"Vision 2020: Computational Needs of the Chemical Industry", National Research Council, Workshop on Impact of Advances in Computing and Communications Technologies on Chemical Sciences and Technology, Washington DC, November 1-2, 1998. "Perspectives on Planning and Scheduling Developments", Recent Developments in Computing & Systems Technology, Plenary session, AIChE Annual Meeting, Miami Beach, November 15-20, 1998. "Vision 2020 and Process Systems Engineering", Recent Developments in Computing & Systems Technology, Plenary session, AIChE Annual Meeting, Miami Beach, November 15-20, 1998. "Young Faculty Mentoring: Overview & Practices", Department Heads Forum, AIChE Annual Meeting, Miami Beach, November 15-20, 1998. “Realities and Prospects of Process Scheduling Technology”, McMasters Workshop on Process Scheduling, McMaster University, Hamilton, Ontario, Canada, May 5, 1999 “Optimization Methods and Process Systems Engineering” and “Process Engineering Applications of Optimization Methods” , Workshop on Process Optimization, Dongguk University, Seoul, Korea, July 1-3, 1999. “Overview of Planning and Scheduling Technologies”, ENPROMER, Florianopolis, Brazil, August 29-September 2. 1999 “Risk and Uncertainty in Managing Chemical Manufacturing Supply Chains”, Second PanAmerican Workshop on

Catalysis & Process Systems Engineering, Santa Fe, Argentina, September 2-3, 1999. “Curriculum Innovations at Purdue”, Curriculum 2000 Symposium, AIChE Annual Meeting, Dallas, Tx, November

1999

“Treatment of Risk and Uncertainty in Design, Planning, and Scheduling”, AspenWorld 2000, Orlando, Fl, February 2000

“Approaches to Risk and Uncertainty in Chemical Manufacturing and Supply Chains”, 5

th Italian Conference on

Chemical and Process Engineering, Florence, Italy, May, 2001

“Scheduling and Planning in the CPI”, advanced lecture series, PLAPIQUI, Bahia Blanca, Argentina, July 27-

August 2, 2001

“New Directions in the Careers and Education of Chemical Engineers and CAPE Professionals”, 12th

European Symposium on Computer Aided Process Engineering, the Hague, May, 2002 (keynote).

23

“Review of FOCAPO 2003”, Fourth International Conference on Foundations of Computer Aided Process

Operations 2003, Coral Springs, Fl, January 2003, (Conference Rapporteur)

“Challenges in Industry-University Cooperative Research and Technology Transfer”, 13th

European Symposium on Computer Aided Process Engineering, Lappeenranta, Finland, June 2003 (keynote)

“A Computational Framework for Supply Chain Analysis”, 6th

Italian Conference on Chemical and Process

Engineering, Pisa, Italy, June 2003 (plenary)

“Design and Operation of Supply Chains in Support of Business and Financial Strategies”, 6th

International

Conference on Foundations of Computer Aided Process Design, Princeton, NJ, July 2004 (plenary)

“Enterprise-wide Decision Support Systems: PSE Contributions and Promise”, European Symposium on Computer

Aided Process Engineering -15, Barcelona, Spain, May 2005 (keynote)

“New Product Development Pipeline Management”, Pan American Advanced Studies Institute on Process Systems

Engineering, Iguazu Falls, Argentina, August 16-23, 2005 (Invited lecture series) “Enterprise-wide Perspectives in Engineering Decisions”, Merck Sharp & Dohme Lecture, Department of Chemical Engineering, University of Puerto Rico, Mayaguez, Oct 20, 2005 “Decision Support for Pharmaceutical Product Pipeline Management”, 12

th Chemical Engineering Symposium,

Department of Chemical Engineering, University of Puerto Rico, Mayaguez, Oct 21, 2005, (keynote) “Enterprise-wide Perspectives in Engineering Decisions”, Fourth International Conference on Chemical and Food Engineering, Puebla, Mexico, March 6, 2007 (keynote) “Perspectives on Process Systems Engineering R&D in Support of Pharmaceutical Product/Process Development and Manufacturing”, European Symposium on Computer Aided Process Engineering -17, Bucharest, Romania, May 27-30, 2007 (keynote)

Conference Presentations: "Necessary Conditions for a Local Optimum Without Prior Constraint Qualifications," TIMS-ORSA Joint National Meeting, San Francisco, California, May, 1968. "A Differential Algorithm for Posynomial Programs, "DECHEMA CONGRESS, Frankfurt, Germany, June, 1970. "Geometric Programming via a Primal Auxiliary Problem," ORSA 39th National Meeting, Dallas, Texas, May,

1971. "An Algorithm for Signomial Programs," AIChE 74th National Meeting, New Orleans, Louisiana, March, 1973.

"DISCON - A Program for the Simulation of Multiproduct Batch Chemical Process," International Congress on the Use of Computers in Chemical Engineering, Paris, France, April, 1973.

"Degeneracy in Mathematical Programming Algorithms Using Implicit Variable Elimination," VIII. International Symposium on Mathematical Programming, Stanford University, August, 1973.

"A GASP IV Simulation of Inventory Control and Production Scheduling for a Multi-Product Plant," 5th Pittsburgh Conference on Modelling and Simulation, University of Pittsburgh, April, 1974.

"Optimization of a Nonideal Staged Compression Facility," 1974 Purdue Compressor Technology Conference,

Purdue University, July, 1974.

24

"Flexible Solutions to Linear Programs Under Uncertainty," AIChE National Meeting," Houston, Texas, March

1975.

"Simulation of the Operation of a Staged Multiproduct Process with Limited Interstage Storage Buffers," Ninth

Hawaii International Conference on Systems Science, January, 1976.

Routine Programs and Use of Electronic Computers in Chemical Engineering, Panelist, World Congress on

Chemical Engineering, Amsterdam, The Netherlands, June, 1976.

"GASP IV and the Simulation of Semi-Continuous Processes," AIChE 69th Annual Meeting, Chicago, Illinois, Nov.

30, 1976.

"Scheduling of Semicontinuous, Parallel Train Processors with Change Over Restrictions," AIChE 69th Annual

Meeting, Chicago, Illinois, Nov. 30, 1976.

"Scheduling and Simulation of a Staged, Semicontinuous Multiproduct Process," The Second Pacific Chemical

Engineering Congress, Aug. 30, 1977, Denver, Colorado.

"On the Computational Utility of Posynomial Geometric Programming Solution Methods," ORSA-TIMS Joint National Meeting, Atlanta, GA, November 8, 1977. "Solution of Material Balances for Flowsheets Modelled with Elementary Modules: The Unconstrained Case," AIChE Annual Meeting, New York, NY, November, 1977. "Modelling of Staged Fluidized Bed Coal Pyrolysis Reactors," AIChE National Meeting, Philadelphia, PA, June, 1978. "Solution of Material Balances for Flowsheets Modelled with Elementary Modules: The Constrained Case," AIChE National Meeting, Philadelphia, PA, June, 1978. "Computer Aided Drawing of Process Flowsheets," AIChE Annual Meeting, Miami Beach, Nov., 1978. "Modelling and Analysis of An Integrated Coal Pyrolysis, Gasification and Combustion Reactor System," AIChE Annual Meeting, Miami Beach, Nov., 1978. "A Hierarchical Strategy for Large Scale Process Calculations," 12th Symposium on Computer Applications in Chemical Engineering, Montreux, Switzerland, April, 1979. "A Two Level Approach Exploiting Sparsity in Material Balancing," AIChE National Meeting, Houston, TX, April, 1979.

"Simulation of a Coal Oil Hydrotreating Section," AIChE National Meeting, Houston, TX, April, 1979. "A Scheduling Model for Energy Conservation in Food Processing," Joint Meeting Canadian and American

Societies of Agriculture Engineers, Winnipeg, Canada, June, 1979.

"Optimization of a Complex Chemical Process Using an Equation Oriented Model," Tenth International Symposium on Mathematical Programming, Montreal, August, 1979.

"Computer-Aided Flowsheet Drawing II: Stream Layout and Drawing" AIChE Annual Meeting, San Francisco, Nov., 1979.

"Computer-Aided Flowsheet Drawing I: Equipment Layout," paper 55c, AIChE National Meeting, Portland, OR ,

August, 1980.

"On Optimal Design of Batch/Semicontinuous Process," paper 3d, AIChE Annual Meeting, Chicago, Nov., 1980.

25

"Combined Design and Scheduling of Regenerative Noncontinuous Processes," paper 54c, AIChE National Meeting,

Houston, April, 1981.

"PCOST: A Data Base Oriented Costing and Economic Analysis Program," AIChE National Meeting, Houston,

April, 1981.

"Computer Aided Synthesis and Design of Plant Utility Systems," AIChE National Meeting, Houston, April, 1981.

"Optimal Selection of Coal Desulfurization Technology," CORS-TIMS-ORSA Joint Meeting, Toronto, Canada,

May, 1981.

"Fluidized Bed Reactor Model with Generalized Particle Balances," paper 41b, AIChE National Meeting, Detroit

MI, August, 1981.

"A Computational Study of Geometric Programming Solution Methods," ORSA-TIMS Meeting, Houston, TX, Oct.,

1981.

"Discrete Variable Optimization Strategies for the Design of Multiproduct Processes," paper 51c, AIChE Annual meeting, New Orleans, LA, November, 1981. "Investigation of Strategies for Executing Constrained Sequential Modular Simulations," Chemcomp 82, Antwerp, Belgium, May, 1982. "Review of Scheduling of Process Operations," Process Systems Engineering 82, Kyoto, Japan, August, 1982. "A Simulator for Batch and Semicontinuous Processes," paper 20f, AIChE Annual Meeting, Los Angeles, CA, Nov., 1982. "BOSS: A Process Simulator for Noncontinuous Operations," Third International Congress on Computers and Chemical Engineering, Paris, France, April, 1983. "A Multitime Period Production Planning Model for Food Processing Plants," Third International Congress on Computers and Chemical Engineering, Paris, France, April, 1983. "Purdue-Industry Joint Development of Chemical Process Engineering Laboratory Modules," 1983 Frontiers in Education Conference," St. Louis, Oct., 1983. "A Prototype Process Engineering Workstation," paper 43d, AIChE Annual Meeting, Washington, DC, October 1983. "Computer Aids for the Design of Food Processes," Institute of Food Technolgy Annual Meeting, Anaheim, CA,

June, 1984. "Variability Analysis for Intermediate Storage in Noncontinuous Process: Deterministic Case," paper 45c, AIChE

Annual Meeting, San Francisco, CA, November, 1984.

"Simulation of a Large Scale Multiproduct Polymer Process using BOSS," paper 45f, AIChE Annual Meeting, San Francisco, CA, November, 1984.

"Computer Aided Design of an Energy Efficient Food Processing Plant," paper 97d, AIChE Annual Meeting, San Francisco, CA, November, 1984.

"Determination of Completion Times for Serial Multiproduct Processes under Mixed Intermediate Storage

Policies," paper 123c, AIChE Annual Meeting, San Francisco, CA, November, 1984.

"Variability Analysis for Intermediate Storage in Noncontinuous Processes: Stochastic Case," Second International Process Systems Engineering Conference, Cambridge, England, April, 1985.

26

"Approximate Scheduling Algorithms for Network Flowshops," Second International Process Systems Engineering

Conference, Cambridge, England, April, 1985.

"Synthesis and Sizing of Batch/Semicontinuous Processes," paper 35a, AIChE Annual Meeting, Chicago, November, 1985.

"Dynamic Simulation of Multicomponent Batch Rectification with Chemical Reactions," paper 52e, AIChE Annual

Meeting, Chicago, November, 1985.

"A Prototype Interactive Graphics Environment for Batch Process Simulation," paper 42e, AIChE National Meeting,

New Orleans, April, 1986.

"Automatic Generation of Local Adaptive Approximations to Equilibrium Ratios," paper 12j-301, World Congress

III of Chemical Engineering, Tokyo, Japan, September, 1986.

"Simulation of Batch Processes via the BOSS-Plus Flexible Module Structure," paper No., 86-2689, Instrument

Society of America ISA 86 International Conference, Houston, October, 1986. "Using Chemical Engineering in the Computer Industries," paper, 121e, AIChE Annual Meeting, Miami Beach, November 1986. "Adaptive Local Thermodynamic Property Approximation in Process Simulation: Liquid Acitivity Coefficients," paper 157a, AIChE Annual Meeting, Miami Beach, November, 1986. "BOSS-Plus and the Simulation of Multipurpose Plants," paper 40a, AIChE National Meeting, Houston, April, 1987. "The Impact of Applied Mathematics in Computer Aided Design", paper 85f, AIChE Annual Meeting, New York, Nov. 1987. "Scheduling Network Flowshops so as to Minimize Makespan," paper 93c, AIChE Annual Meeting, New York, Nov. 1987. "Optimal Schedule Generation for a Single Product Production Line," paper 93e, AIChE Annual Meeting, New York, Nov. 1987. "Design of Multiproduct Batch Plants Under Uncertainty with Staged Expansion," paper 92b, AIChE Annual Meeting, New York, Nov. 1987. "Problems in the Scheduling of Batch Chemical Processes", paper MA 35.3, TIMS/ORSA Joint National Meeting,

Washington, DC, April, 1988. "Use of Symbolic Vector Computing in Process Flowsheeting", paper 21a, AICHE Spring National Meeting, New

Orleans, LA, March, 1988.

"Formation of Single Product Campaigns in a Multipurpose Batch Chemical Plant", paper 76e, AICHE Annual Meeting, Washington, DC, November, 1988.

"Dynamic Operating Policies for Periodic Processes Subject to Equipment Failures", paper 79b, AICHE Annual Meeting, Washington, DC, November, 1988.

"Capacity Expansion Study of a Batch Production Line", paper 82e, AICHE Annual Meeting, Washington, DC,

November, 1988.

"The Design of Multiproduct Batch Plants under Uncertainty with Staged Expansion II," papger 82, CACHE'89, European Symposium on Computer Applications in the Chemical Industry, Erlangen, FRG, April, 1989.

27

"Simulation Methodology Development for Food Process Modeling," paper 7.19, Fifth International Congress on

Engineering and Food, June, 1989.

"Generalized Hopfield Networks and Nonlinear Optimization", Neural Information Processing Systems, Denver, CO., November, 1989.

"Campaign Formation and Production Planning for Multipurpose Batch Chemical Plants", paper 24a, AICHE

Annual Meeting, San Francisco, November, 1989.

"A Decomposition Approach to the Design of Multipurpose Batch Plants", paper 25e, AICHE Annual Meeting, San

Francisco, November, 1989.

"Application of Generalized Hopfield Networks to Discrete Nonlinear Optimization Problems", paper 8B, AIChE

National Meeting, Orlando, FL, March, 1990.

"Completion Time Calculations of a General Multiproduct Batch Plant with Resource Constraints," Paper 102a,

AIChE National Meeting, Orlando, FL, March 1990. "Scheduling of a Multipurpose Batch Plant with Resource Constraints", Paper 92B, AIChE Annual Meeting, Chicago, November, 1990. "Retrofit Design of Multipurpose Batch Chemical Plants", Paper 13f, AIChE Annual Meeting, Chicago, November, 1990. "Optimal Scheduling of Batch Processes for Heat Integration", Paper 311,10b, AIChE Annual Meeting, Chicago, November, 1990. "On Reducing the Propagation of the Effects of Failures in Batch Serial Trains", Paper 311,10d, AIChE Annual Meeting, Chicago, November, 1990. "Computer Assisted Chemical Plant Layout", 1990 Amoco/University Poster Session, Naperville, IL, October 5, 1990. "Mixed Integer Programming Approaches to Batch Chemical Process Design & Scheduling", ORSA/TIMS Joint National Meeting, Philadelphia, PA, October 29-31, 1990. "A Comprehensive Framework for the Scheduling of Resource Constrained Multipurpose Batch Plants," Fourth International Symposium on Process Systems Engineering, Montebello, Quebec, Canada, August, 1991. "A Heuristic Algorithm for Scheduling Multi-Product Plants with Production Deadlines, Intermediate Storage

Limitations, & Equipment Change-over Costs," Fourth International Symposium on Process Systems Engineering, Montebello, Quebec, Canada, August, 1991.

"An Interval-based Approach to Resource Constrained Batch Scheduling Part 1: Interval Processing Framework,"

Computer Aided Process Engineering-91, European Federation of Chemical Engineers, Barcelona, Spain, October, 1991.

"Graph Partitioning with Multiple Property Constraints for Multifloor Batch Plant Layout," Paper 133d, AIChE Annual Meeting, Los Angeles, November, 1991.

"An Interval-based Approach to Resource Constrained Batch Scheduling Part 2: Task Assignment and Adaptive Storage Retrofitting," Paper 140d, AIChE Annual Meeting, Los Angeles, November, 1991.

"Global Optimization Strategies Using Feature Extraction," Paper 140h, AIChE Annual Meeting, Los Angeles,

November, 1991.

28

"Discrete Optimization Methods in the Problem of Training Artificial Neural Networks," Paper No. 143d, AIChE

Annual Meeting, Los Angeles, November, 1991.

"Partially Asynchronous Iterative Methods for the Numerical Integration of Dynamical Systems," Paper 158b,

AIChE Annual Meeting, Los Angeles, November, 1991.

"Simulated Laboratory Modules," Paper 225, AIChE Annual Meeting, Los Angeles, November, 1991.

"Distributed Asynchronous Gradient Optimization Algorithms", Amoco/University Poster Session, Naperville, Il,

October 4, 1991.

"Reactive Schedule Modifications in Multipurpose Batch Chemical Plants", Paper 61e, AIChE National Meeting,

New Orleans, March, 1992.

"Model Based Feedback Delay Controller for Intermediate Storage in Batch Processes", Dycord++92, College Park,

MD, April, 1992.

"The Influence of Resource Constraints in the Retrofit Design of Multipurpose Batch Chemical Plants", NATO ASI Batch Processing Systems Engineering, Antalya, Turkey, May/June, 1992. "An Interval based Mathematical Model for the Scheduling of Resource-Constrained Batch Chemical Processes", Paper 135d, AIChE Annual Meeting, Miami Beach, Nov, 1992. "The Problem of Scheduling Multipurpose Batch Chemical Plants with Resource Constraints: Modelling Techniques and Decomposition Methods", Paper 136b, AIChE Annual Meeting, Miami Beach, Nov., 1992. "Analysis of Spurious Behavior of Asynchronous Relaxation Algorithms", Paper 138e, AIChE Annual Meeting, Miami Beach, Nov., 1992. "Leadership within the Context of Academia", Panelist & Presenter, Session 219, AIChE Annual Meeting, Miami Beach, Nov., 1992. "Optimal Scheduling of the Resource Constrained Batch and Semi-Continuous Chemical Plant", TIMS/ORSA Meeting, Chicago, Spring 1993. "Design of Batch Chemical Plants under Uncertainty," TIMS/ORSA Meeting, Chicago, Spring, 1993. "Mathematical Programming Based Heuristics for Scheduling the General Batch/Semicontinuous Process," American Control Conference, San Francisco, June 1993. "An Enhanced Mathematical Programing Model and Subsequent Reduction Methods for the Scheduling of the

General Batch and Semicontinuous Chemical Plant", paper 144e, AIChE Annual Meeting, St. Louis, November, 1993.

"A Hierarchical Approach to Batch Plant Design under Uncertainty," paper 154f, AIChE Annual Meeting, St. Louis,

November, 1993. "Computer Simulations of State of the Art Industrial Processes", paper 214o, AIChE Annual Meeting, St. Louis,

November, 1993. "A Comprehensive Approach to Chemical Process Planning and Scheduling", Computer Integrated Manufacturing in

the Process Industries, East Brunswick, NJ, April 25, 1994

"RCSP++: AScheduling System for the Chemical Process Industry", Fifth International Symposium on Process Systems Engineering, PSE'94, Kyongju, Korea, May 30, 1994.

29

"Model Based Inventory Controller for Multiproduct Warehouse Systems", Fifth International Symposium on

Process Systems Engineering, PSE'94, Kyongju, Korea, May 30, 1994.

"Towards Multimedia Education in the Chemical Engineering Laboratory", ASEE, Edmonton, Canada, June 27-29,

1994.

"A Framework for Global Planning, Design, and Decision Making in the Batch Processing Industry", paper 225b,

AIChE Annual Meeting, San Francisco, November, 1994.

"Asynchronous Distributed Decision Making with Applications to Process Operations Problems", paper 233n,

AIChE Annual Meeting, San Francisco, November, 1994.

"Mathematical Programming Formulation for Scheduling of Batch Operations using Nonuniform Time

Discretization, "paper 235d, AIChE Annual Meeting, San Francisco, November, 1994.

"A New Global Optimization Algorithm for Batch Process Scheduling", Symposium on State of the Art in Global

Optimization" Princeton NJ, April, 1995.

"Techniques for Problem Size Reduction in the Design of Large Scale Batch Chemical Plants under Market Uncertainty", 5th European Symposium on Computer Aided Process Engineering (ESCAPE 5), Bled, Slovenia, June 11-14, 1995. Programming Formulation for Scheduling of Batch Operations based on Nonuniform Time Discretization", 5th European Symposium on Computer Aided Process Engineering (ESCAPE 5), Bled, Slovenia, June 11-14, 1995. "Issues in Solving Large Scale Planning, Design, and Scheduling Problems in Batch Chemical Plants", 5th European Symposium on Computer Aided Process Engineering (ESCAPE 5), Bled, Slovenia, June 11-14, 1995. "A Framework for Investigating Schedule Robustness under Uncertainty", 5th European Symposium on Computer Aided Process Engineering (ESCAPE 5), Bled, Slovenia, June 11-14, 1995. “Bayesian Approach to Batch Process Scheduling”, paper WA1.3, IFORS Conference on Operations Research and Engineering Design, St. Louis, Mo., Oct, 1995. “Design of Optimal Feed and Reflux Policy for Multicomponent Reactive Distillation”, paper No. 21b, AIChE Annual Meeting, Miami Beach, November 1995. “A Bayesian Approach in Batch/Semicontinuous Process Scheduling: Computational Comparisons”, paper No. 174c, AIChE Annual Meeting, Miami Beach, November 1995. “Intelligently Utilizing Process Recipes within Scheduling Heuristics”, paper No. 177d, AIChE Annual Meeting,

Miami Beach, November 1995. “Campaign Optimization of Multicomponent Reactive Batch Distillation”, paper No. 87b, AIChE National Meeting,

New Orleans, February, 1996.

“An Integrated Approach to Economic and Environmental Issues in Design of Batch Chemical Processes”, paper No. 83f, AIChE National Meeting, New Orleans, February, 1996.

"Continuous Time Representation in Batch/Semicontinuous Process Scheduling: Randomized Heuristics Approach, 6th European Synposium on Computer Aided Process Engineering (ESCAPE6), Rhodes, Greece, May, 1996.

"Determination of Robust Due Dates and/or Strategic Inventories for Batch Processing using Monte Carlo

Simulation", paper 144c, AIChE Annual Meeting, Chicago, November, 1996.

"Robust Scheduling with Processing Time Uncertainty", Sixth International Symposium on Process Systems Engineering, Trondheim, Norway, May, 1997.

30

"Obtaining Realistic Production Plans for a Batch Production Facilility", Sixth International Symposium on Process

Systems Engineering, Trondheim, Norway, May, 1997.

"A Graduate Course in Computer Integrated Process Operations", Sixth International Symposium on Process Systems Engineering, Trondheim, Norway, May, 1997.

“Scheduling a Serial Batch Line with Significant Process Uncertainty”, paper 210b, AIChE Annual Meeting, Los

Angeles, Nov., 1997.

“Robust Planning and Scheduling of Process Development Projects under Stochastic Conditions”, paper 211a,

AIChE Annual Meeting, Los Angeles, Nov., 1997.

“Industrial Applications of Robust Process Development Project Planning” paper 62d, AIChE National

Meeting, New Orleans, March, 1998.

"Sensitivity Analysis for Project Planning and Scheduling under Uncertain Completions", European

Symposium on Computer Aided Process Engineering-8, Brugge, Belgium, May, 1998 "Multi-Level Strategies for Optimizing Campaign Structures for Reactive Batch Distillation Systems", 5th IFAC Symposium on Dynamics and Control of Process Systems, Corfu, Greece, June, 1998. "Scheduling A Batch Serial Line under Significant Process Uncertainty", paper 243c, AIChE Annual Meeting, Miami Beach, November 1998. "A Computational Architecture for Addressing both Combinatorial and Stochastic Aspects of Process Management Problems", paper 243f, AIChE Annual Meeting, Miami Beach, November 1998. "Exploiting Deterministic Methods in the Treatment of Risk Analysis for Process Management Problems: An Approach for Problems Exhibiting Knapsack Structure", paper 243h, AIChE Annual Meeting, Miami Beach, November 1998. "Developing Environmentally and Economically Sustainable Food Processing Systems", paper 245c, AIChE Annual Meeting, Miami Beach, November 1998. Economic Risk Management for Design and Planning of Chemical Manufacturing Supply Chains”, Fifth Int’l Conference on Foundations of Computer Aided Process Design, July, 1999 “Economic Risk Management for Design and Planning of Chemical Manufacturing Supply Chains: Extensions”, paper 232f, AIChE Annual Meeting, Dallas, TX, November 1999.

“Dynamic Optimization-based Fault Accommodation”, 7th

International Symposium on Process Systems Engineering, Keystone, Colorado, July, 2000

“A Simulation-Optimization framework for addressing combinatorial and stochastic aspects of an R&D pipeline

management problem”, 7th

International Symposium on Process Systems Engineering, Keystone, Colorado, July, 2000

“Capacity Expansion Problem of Multisite Batch Plans with Production and Distribution”, 7th

International Symposium on Process Systems Engineering, Keystone, Colorado, July, 2000

“General Formulation of Fault Accomodation”, paper 237d, AIChE Annual Meeting, Los Angeles, November 2000.

“SIM-OPT; Integrating Timeline Information for Addressing Combinatorial and Stochastic Aspects of an

R&D Pipeline Management Problem”, paper 262h, AIChE Annual Meeting, Los Angeles, November 2000.

31

“Wavelet Shrinkage Based Measurement Error Covariance Matrix Estimations”, 11th

European Symposium

on Computer Aided Process Engineering, Kolding, Denmark, May, 2001

“TAMES Release 2.2.1.0: A Tailored User Friendly Interactive Scheduling Solution for Campaigning

Batch Production”, paper 63d, AIChE Annual Meeting, Reno, Nevada, November 2001.

“Optimal Design of Batch Storage Network”, paper 82f, AIChE Annual Meeting, Reno, Nevada, November

2001.

“Algorithm Engineering for Research & Development Pipeline Management to Address Combinatorics and

Uncertainty” paper 285b. AIChE Annual Meeting, Reno, Nevada, November 2001.

“An Efficient Parallel Algorithm for Large Data Set Clustering” paper 288f, AIChE Annual Meeting, Reno,

Nevada, November 2001.

“ePIMA: A computational Framework for Studying Supply Chains”, paper 292b, AIChE Annual Meeting,

Reno, Nevada, November 2001.

“A New Modeling and Optimization Framework for Risk Management of Supply Chains under Economic Uncertainty”, paper 292d, AIChE Annual Meeting, Reno, Nevada, November 2001. Optimal Design of Batch-Storage Network under Periodic Shutdown”, paper 243a, AIChE Annual Meeting, Indianapolis, IN, November 2002. "Web-based Simulation of Industrial Processes: Hydrogen Liquefaction and Bean Decaffeination, paper 157d, AIChE Annual Meeting, Indianapolis, IN, November 2002. "TAMES 2.21.5 & 2.1.1.6: Educational Scheduling for Industrial Practice Modules, paper, j, AIChE Annual Meeting, Indianapolis, IN, November 2002. "A Framework for Planning and Control of Pharmaceutical New Product Development Pipelines", paper 247c, AIChE Annual Meeting, Indianapolis, IN, November 2002. “Optimal Scheduling of Multistage Polymer Plants”, Foundations of Computer Aided Process Operations 2003, Coral Springs, Fl, January, 2003. “Importance of Sensitivity Analysis in Intensity Modulated Radiation Therapy”, EURO/INFORMS Joint International Conference, Istanbul, Turkey, July, 2003. “ESIP: Educational Scheduling Solutions for Industrial Practice”, paper 345n, AIChE Annual Meeting, San Francisco, November 2003

‘Optimal Lot Size of Semi-continuous Processes Using Periodic Square Ware Model”, paper 426d, AIChE Annual Meeting, San Francisco, November 2003

“Optimal Design of Multi-site Batch Storage Network under Scenario-based Uncertainty”, paper 446b, AIChE Annual Meeting, San Francisco, November 2003

“Simulation-based Optimization Framework for Supply Chain Risk Management under Demand Uncertainty”, paper 446e, AIChE Annual Meeting, San Francisco, November 2003

“Simulation-based Optimization with Surrogate Models”, paper 450h, AIChE Annual Meeting, San Francisco, November 2003

“A Simulation-based Optimization Framework to Analyze Supply Chains”, paper 451d, AIChE Annual

Meeting, San Francisco, November 2003

32

“A Computational Framework for Studying Decentralized Supply Chain Dynamics”, paper 451r, AIChE

Annual Meeting, San Francisco, November 2003

“Simulation based optimization framework to investigate and analyze complex supply chains”, PSE 2003,

Kunming, China, (rescheduled Jan, 2004)

“Optimal Design of Batch Storage Network with Recycling Streams”, PSE 2003, Kunming, China,

(rescheduled Jan, 2004).

“Simulation Based Optimization With a Surrogate Model: Supply Chain Application”, 14th

European

Symposium on Computer Aided Process Engineering, Lisbon, Portugal, May, 2004

“A Computational Framework for Studying Decentralized Supply Chain Dynamics”, 14th

European

Symposium on Computer Aided Process Engineering, Lisbon, Portugal, May, 2004

“Safety Stock Management for Multi-Stage Supply Chain under Production Capacity Constraints”, paper

421f, AIChE Annual Meeting, Austin, TX, November 2004

“Risk Management in Capacity Expansion”, paper 422c, AIChE Annual Meeting, Austin, TX, November 2004 “Pharmaceutical Informatics: A Novel Paradigm for Pharmaceutical Product Development and Manufacture”, paper 473d, AIChE Annual Meeting, Austin, TX, November 2004 “Optimal Design of Batch Storage Network with Financial Transactions and Cash Flows”, paper 400g, AIChE Annual Meeting, Austin, TX, November 2004 “Pharmaceutical Informatics: A Novel Paradigm for Pharmaceutical Product Development and Manufacture”, 15

th European Symposium on Computer Aided Process Engineering, Barcelona, Spain, May,

2005 “A Holistic Approach for Modeling Information and Knowledge in Development and Operations of Chemical Processes”, paper 27a, AIChE Annual Meeting, Cincinnati, Ohio, October 2005 “An Informatics Framework for Pharmaceutical Product Development”, paper 76c, AIChE Annual Meeting, Cincinnati, Ohio, October 2005. “From Discovery to Manufacturing Recipe Life Cycle Management”, paper 104ea, AIChE Annual Meeting, Cincinnati, Ohio, October 2005. “A Simulation-based Optimization Approach to the Evolution of an Advanced Life Support System for

Mars Base”, paper 104f, AIChE Annual Meeting, Cincinnati, Ohio, October 2005. “Optimal Design of Batch Storage Network under Random Failures and Waste Treatment Processes”, paper

240w, AIChE Annual Meeting, Cincinnati, Ohio, October 2005.

“Systematic Modeling of Knowledge in Pharmaceutical Product Formulation”, paper 437b, AIChE Annual Meeting, Cincinnati, Ohio, October 2005.

“Simulation Based Optimization for Risk Management in Multi-Stage Capacity Expansion”, PSE 2006 / 16

th European Symposium on Computer Aided Process Engineering, Garmisch-Partenkirchen, Germany,

July, 2006

“A Framework for Capturing the Impact of Resource Allocation Policies in the Selection of New Product Portfolio”, PSE 2006 / 16

th European Symposium on Computer Aided Process Engineering, Garmisch-

Partenkirchen, Germany, July, 2006

33

“A Unified Approach to Knowledge Modeling in Pharmaceutical Product Development” PSE 2006 / 16th

European Symposium on Computer Aided Process Engineering, Garmisch-Partenkirchen, Germany, July,

2006

“Information Modeling for Pharmaceutical Product Development” PSE 2006 / 16th

European Symposium on Computer Aided Process Engineering, Garmisch-Partenkirchen, Germany, July, 2006

“Decentralized Supply Chain Dynamics and the Quantity Flexibility Contract” PSE 2006 / 16th

European

Symposium on Computer Aided Process Engineering, Garmisch-Partenkirchen, Germany, July, 2006

‘Technology Roadmap for Pharmaceutical Development and Manufacturing”, ISPE Annual Mtg, Orlando,

FL, November 5, 2006.

“Using Simulation-based Optimization Approach for Space Mission Process Synthesis and Design”, paper

342c, AIChE Annual Mtg., San Francisco, November 2006

“An Ontology-based Information Management System for Pharmaceutical Product Development”, paper

457a, AIChE Annual Mtg., San Francisco, November 2006 “A Continuous Approach to Multi-Mode Resource Project Scheduling”, paper 610d, AIChE Annual Mtg., San Francisco, November 2006 “An Ontology-based Approach for Managing General Recipes in Batch Processes”, paper 675f, AIChE Annual Mtg., San Francisco, November 2006 “ An Ontology-based Approach for Knowledge Modeling in Pharmaceutical Product Development”, paper 677d, AIChE Annual Mtg., San Francisco, November 2006 “Technology Roadmap: Manufacturing”, paper 468b, AIChE Annual Mtg, San Francisco, November, 2006.

GRADUATE THESES DIRECTED PhD: Thesis Advisor or Co-advisor for thirty-nine students P.V.L.N. Sarma Strategy of Modeling and Optimization in Chemical Process Design, May, 1978, DuPont B. W. Overturf Toward a General Description of Gas-Solid Reactions in a Fluidized Bed Reactor, December, 1980, Eastman Chemical

F. C. Knopf Computer Aided Designs for Non-Continuous Processing August, 1980, Louisiana State University

S.A. Shah Hierarchical Production Planning and Energy Modeling for Food Processing

Plants, May, 1984, Kraft W. Wiede, Jr. An Interactive Scheduling system for the Operation of

Multiproduct Plants, December, 1984, UOP I. Karmi Analysis of Intermediate Storage in Noncontinuous Processes, December,

1984, National University of Singapore

S. M. Clark Automatic Generation of Local Thermodynamic Approximations in Process Simulation, December, 1985.

Batch Process Technologies

34

C.M. Lin Computer Aided Optimal Design of Energy Recovery Systems, December,

1986, ABB Simcon

K. Kuriyan Scheduling of Batch Processes, May, 1987, Purdue University

N. C.C. Yeh Preliminary Design of Batch/Semicontinuous Processes

December, 1987, Chevron

I.B. Lee Optimal Synthesis of Flexible Heat Exchanger Networks,

December, 1987, Pohang University, Korea

E.S. Lee Intermediate Storage and Operation of Periodic Processes, December, 1988,

Dongguk University, Korea

H. S. Wellons The Design of Multiproduct Batch Plants under Uncertainty with Staged

Expansion, December, 1989, ExxonMobil

M. C. Wellons Scheduling of Multipurpose Batch Chemical Plants, December, 1989, ExxonMobil G. Tongo Scheduling of Batch Chemical Plants with Resource Constraints, August ,

1990, BP Amoco S. Papageorgaki Design of Multipurpose batch Chemical Plants using Mathematical

Programming Techniques, May, 1991, Air Products & Chemicals A. Tsirukis Scheduling of Multipurpose Batch Chemical Plants August, 1991, Air Products & Chemicals B. Lee Optimal Scheduling of batch processes for Heat Integration, May, 1992, Kynghee University, Korea S. Jayakumar Chemical Plant Layout via Graph Partitioning, May, 1992, Millenium

Petrochemicals M. Zentner An Interval based Framework for the Scheduling of Resource-Constrained

Batch Chemical Processes, May, 1992, Advanced Process Combinatorics G. Yi Modelling and Operation of Intermediate Strorage in Noncontinuous

Processes, May, 1992, PuKyong University, Korea

A. Elkamel Scheduling Process Operations using Mathematical Programming Techniques: Towards a Prototype Decision Support System, August, 1993. University of Waterloo, Canada

I. Androulakis Asynchronous Distributed Decision Making December, 1993, Rutgers University

S. Subrahmanyam Issues in Design and Scheduling of Batch Processes May, 1996, American Airlines

L. Mockus, Nonuniform Time Discretization Approach to Batch and Continuous Process Scheduling, August, 1996, Pfizer

M. Bassett Decomposition Techniques for Solving Large Scale Planning and Scheduling

Problems, December, 1996, Dow Ag Sciences

35

R. Wajge Campaign Optimization of Multicomponent Reactive Batch Distillation,

December, 1997, BOC

S. Honkomp Solving Mathematical Programming Planning Models Subject to Stochastic

Task Success, December, 1998, Procter & Gamble

D. Schertz Scheduling under Process Uncertainty: A Batch Serial Line Study, December

1999, Advanced Process Combinatorics, West Lafayette, IN

J. Sohn A Systems Approach to Process Waste Water Management with Food

Processing Applications, December 2000, Korea, employer unkown

S. Bose Issues in the Design, Development, and Use of Process Management Models,

May 2001, McKinsey & Co., Cleveland

D. Subramanian A Computational Architecture to Address Combinatorial and Stochastic

Aspects of Process Management Problems, December 2001, IBM Research,

Yorktown Heights, NY Y. Huang Towards a Model-Based Fault Accommodation System, May 2002,

ExxonMobil, Singapore G. Applequist Economic Risk Management for Chemical Manufacturing Supply Chain

Planning, August 2002, Advanced Process Combinatorics, West Lafayette, IN V. Subramanian A Computational Framework For Studying Decentralized Supply Chain

Dynamics, August 2004, Oracle, Boston, J. Y. Jung Safety Stock Management of Multistage Supply Chains under Production

Capacity Constraints, December 2004, LG-Caltex, Korea X. Wan Simulation based Optimization with Surrogate Models, December 2004, GE

Technology Center, Shanghai, China

D. Dink Approaches to 4-D Intensity Modulated Radiation Therapy Planning with Fraction Constraints, December 2005, Procter &Gamble, Brussels, Belgium

S. Aydogan A Simulation-based Optimization Approach to Model and Design Life

Support Systems for Manned Space Missions, December 2006

MS: Thesis Advisor or co-advisor for forty-two students (1972-present)