GUJARAT ENERGY TRANSMISSION CORPORATION LIMITED … · 9 HDB Isolator without ES 630A 25kA 3s with...

Sign & seal of Bidder 1

GUJARAT ENERGY TRANSMISSION CORPORATION LIMITED SARDAR PATEL VIDYUT BHAVAN

RACE COURSE, VADODARA - 390 007

TENDER FOR

Supply, erection, testing and commissioning of 220kV/66kV equipments, materials (including Hybrid) on turn key basis including all civil works at 220kv Suva (Rahiyad)

S/S.

TENDER NO : GETCO / Turnkey /220KV Suva(Rahiyad) /57

PART – IV

Price Bid


This page has been kept intentionally Blank.


SUMMARY

Name of work : Supply, erection, testing and commissioning of 220kV/66kV equipments, materials(including Hybrid) on turn key basis including all civil works at 220kv Suva

(Rahiyad) S/S.

Sr No Name of S/S Supply Erection Civil Total in

Rs.

1

220kv Suva (Rahiyad) S/S

(Figure in words : ____________________________________________)

Bidder's Name : ____________________________ Signature : ____________________________ Name : ____________________________ Designation : ____________________________ Bidder's Seal Date : ___________________________


ANNEXURE – A 1 to Bidding schedule for supply prices (FOR 220kv Suva (Rahiyad) S/S)

Name 0f Substation :---------------------

Sr. No.

Description

Qty.

In

Nos.

Rate unit Ex Works

Unit F.O.R. in

Rs.

(4 + 5+6)

Excise duty.

% as well as amount

Sale Tax

% as well as amount

CST = ON (4+9)

VAT = ON (4+9)

Unit end Cost Price in Rs.

(7+9+11)

Total Amount

in Rs

Frei-ght

charges

Insuranc

e

charges

10 11

Rate in %

1 2 3 4

5

6

7 8

Rate in % of Ex-

Works price

9

Unit E.D.

Amount Rs.

CST VAT

Total

amount Rs.

12 13

FOR COST IN RS.

(3 X 7 )

14 END

COST IN

RS. (3 X 12 )

Total

Material Description & Qty. shall be as per supply price schedules

I/ We agree to supply the articles noted above at the rates herein tendered by me/ us subject to the condition of tender and supply of the Tender inquiry, which I / We have carefully read and thoroughly understood.

I/ We hereby agree to keep this offer open for 180 days after the date of the opening of technical bid of tenders and shall be bound by communication of acceptance dispatched within the prescribed time. Bidder's Name : ____________________________ Signature : ____________________________

Name : ____________________________ Designation : ____________________________

Bidder's seal Date : ___________________________*


ANNEXURE – B 1 -Bidding schedule for erection & commissioning prices (FOR 220kv Suva (Rahiyad) S/S) Name of Substation:----------------------

Amount in Rs.

• Material Description & Qty. shall be as per Erection price schedule.

• The amount quoted shall be inclusive of service tax and no separate service tax shall be quoted.

I/ We agree to execute the articles noted above at the rates herein tendered by me/ us subject to the condition of tender and execute of the Tender inquiry, which I / We have carefully read and thoroughly understood . I/ We hereby agree to keep this offer open for 180 days after the date of the opening of technical bid of tenders and shall be bound by communication of acceptance dispatched within the prescribed time. Bidder's Name : ____________________________ Signature : ____________________________ Name : ____________________________ Designation : ____________________________ Bidder's Seal Date : ___________________________

SR. NO.

Description

Unit No./ wt.

Qty. Particulars

Erection/Commissioning rate per unit (including Service tax)

Any other tax

Unit rate of erection & comm. charges + any other tax

Total erection & commissioning charges on end cost basis (Qty. x Unit rate

TOTAL


ANNEXURE – C 1 -Bidding schedule for Civil works (220kv Suva (Rahiyad) S/S) Name of Substation:----------------------

Amount in Rs.

• Material Description & Qty. shall be as per CIVIL WORKS schedule.

• The amount quoted shall be inclusive of service tax and no separate service tax shall be quoted.

• The service tax shall be reimbursed on production of evidence of payment of service tax to appropriate authority by contractor.

I/ We agree to execute the articles noted above at the rates herein tendered by me/ us subject to the condition of tender and execute of the Tender inquiry, which I / We have carefully read and thoroughly understood. I/ We hereby agree to keep this offer open for 180 days after the date of the opening of technical bid of tenders and shall be bound by communication of acceptance dispatched within the prescribed time. Bidder's Name : ____________________________ Signature : ____________________________ Name : ____________________________ Designation : ____________________________ Bidder's Seal Date : ___________________________

SR. NO.

DESCRIPTION UNIT QTY. RATE IN FIGURE

RATE IN WORDS

AMOUNT

TOTAL

TOTAL AMOUNT

IN WORDS


SUPPLY & ERECTION SCHEDULE FOR 220kv Suva (Rahiyad) S/S

Name of work : Supply, erection, testing and commissioning of 220kV/66kV equipments, materials on turnkey basis including all civil works at 220kv Suva (Rahiyad) S/S.

Sr. No.

Particulars of Item Unit Erection

Qty. Supply Qty.

A

Supply and Erection of 220kV Switchyard equipments considering 31mm/kV creepage distance due to marine atmosphere of site as per respective technical specifications and relevant special conditions suitable for Two Main Bus with Quad ACSR Moose conductor and relevant Flyover Bus with Twin ACSR Moose conductor. ,

1

220kV DBB Hybrid switchgear module for 220kV line bay & 220/66 kV Transformer bay( Including 01 Spare)

No. 13 13

2 220kV SBB Hybrid switchgear module for 220kV Bus Coupler bay No. 1 1

3

Surge Arrester 198kV, 10kA, Cl-3 with str and clamp connectors as per Technical spec

No. 36 36

4

PT 220kV/√3-/110V/√3-3C with str and clamp connectors as per Technical spec

No. 6 6

5 BPI 8kN with str and clamp connectors as per Technical spec No. 219 219

6 HBPI 8kN with str and clamp connectors as per Technical spec No. 30 30

7 HDB Isolator with one ES 1600A 40kA 3s with str and clamp connectors as per Technical spec

Set. 2 2

B

Supply and Erection of 220kV Switchyard materials considering 31mm/kV creepage distance due to marine atmosphere of site as per respective technical specifications and relevant special conditions suitable for Two Main Bus with Quad ACSR Moose conductor and relevant Flyover Bus with Twin ACSR Moose conductor. ,

1 Gantry structures GI as per BOM, Steel & A/B part MT 121

2 Gantry structures GI as per BOM, Bolt nut part MT 127.4

6.4

3 VHF Tower Mast Structure GI with stub, template complete as per BOM, Steel & A/B part

MT 1.65

4 VHF Tower Mast structures GI with stub, template complete as per BOM, Bolt nut part

MT

1.7

0.05

5

Stringing of bus with Quad Moose ACSR conductor for all the three phases with required insulators, hardwares & accessories, spacers provided at every 3.0 mtr. interval etc. complete as per relevant standards and approved drawings with Jumpers for continuous Bus Arrangement (It includes cost of insulators, hardwares & accessories, spacers etc.all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor.)

a Main Bus with 36 Mtr span including bus jumpers

No. of Span

18 18

6

Stringing of Earth Wire with 7/3.15 GS wire with required hardwares & accessories etc. complete as per standards and approved drawings .(It includes cost of hardwares & accessories, etc. all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor.)

a 36 mtr span Span 10 10


7

Droppers (including required suspension string with hardware & accessories if any) & Jumpers (including Equipment to Equipment) with Twin Moose ACSR conductor as per standards and approved drawings with provision of required spacers( Suitable for 350mm spacing) at every 3.0 mtr. interval .(It includes cost of insulators, hardwares & accessories, Bolted type T-connectors, spacers etc.all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor)

a 220/66KV Transformer Bay

No. of bay

2 2

b 220KV Line Bay

No. of bay

10 10

c 220KV Bus Coupler Bay

No. of bay

1 1

8

Droppers (including required suspension string with hardware & accessories if any) & Jumpers with Single Moose ACSR conductor as per standards and approved drawings (It includes cost of insulators, hardwares & accessories, Bolted type T-Connectors, etc.all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor)

a 220KV Line Bay - LA & CVT

No. of bay

10 10

b 220KV PT Bay

No. of bay

2 2

C

Supply and Erection of 66kV Switch Yard Equipments considering 31mm/kV creepage distance due to marine atmosphere of site as per respective technical specifications and relevant special conditions suitable for Two Main Bus with Twin ACSR Zebra conductor scheme & relevant Flyover Bus with Twin ACSR Zebra conductor.

1

Power Transformer 66/11kV 5MVA with oil and accessories,with structure and clamp connectors as per Technical spec No. 1 1

2 66kV DBB Hybrid Switchgear Module for 66kV line bay & (66kV side) 220/66kV Transformer bay(Including 01 Spare)

No. 10 10

3

66kV SBB Hybrid switchgear module for 66kV Bus Coupler bay Set. 1 1

4

Surge Arrester 60kV, 10KA, Class 3 with structure and clamp connectors suitable to provide connection between 66kV Cable and Single Moose ACSR

No. 18 18

5

Surge Arrester 60kV, 10KA, Class 3 with structure and clamp connectors suitable for Single Moose ACSR No. 9 9

6 PT 66kV/v3-/110V/v3-2C with structure and clamp connectors suitable for Single Moose ACSR

No. 6 6

7

BPI 4kN with structure and clamp connectors as per Technical spec No. 129 129

8 HBPI 4kN with structure and clamp connectors as per Technical spec No. 24 24


9 HDB Isolator without ES 630A 25kA 3s with structure and clamp connectors suitable for Single Moose ACSR (3nos./set) & Twin Zebra ACSR (3nos./set)

Set. 2 2

D

Supply and Erection of 66kV Switch Yard Material considering 31mm/kV creepage distance due to marine atmosphere of site as per respective technical specifications and relevant special conditions suitable for Two Main Bus with Twin ACSR Zebra conductor scheme & relevant Flyover Bus with Twin ACSR Zebra conductor.

1 Gantry structures GI as per BOM , Steel & A/B part MT 14.23

2 Gantry structures GI as per BOM , Bolt nut part MT 16.21

1.98

3

Stringing of bus for all the three phases with Twin Zebra ACSR conductor, insulators hardwares, spacers(suitable for 350mm spacing) at interval of 4.0 mtr complete as per relevant standards and approved drawings.(The scope includes the cost of insulators, hardwares, accessories, spacers etc.all items required for satisfactory operation. Any variation in quantities shall be absorbed by erection contractor.)

a Main Bus with 30.9 Mtr. Span including bus jumpers Span 4 4

b Main Bus with 34.4 Mtr span including bus jumpers span 2 2

c Main Bus with 31.9 Mtr. Span including bus jumpers Span 2 2

d Transformer flyover bus with 42 Mtr. Span

No. of bay

2 2

4 Stringing of Earth Wire with 7/3.15 GS wire with required hardwares & accessories etc. complete as per standards and approved drawings for the shown span. (It includes cost of hardwares & accessories etc. all items for satisfactory functioning. Any variation in quantities should be absorbed by erection contractor.

a Main Bus with 30.9 Mtr. Span Span 4 4

b Main Bus with 34.4 Mtr. Span Span 2 2

c Main Bus with 31.9 Mtr. Span Span 2 2

d Transformer flyover bus with 42 Mtr. Span

No. of bay

4 4

5 Droppers (including required suspension string with hardware & accessories if any) & Jumpers with Single Moose ACSR conductor as per standards and approved drawings. (It includes cost of insulators, Bolted type T-connectors,hardwares & accessories etc. all items required for satisfactory functioning. Any variation in quantities shall be absorbed by erection contractor)

a 220/66KV Transformer Bay - LA

No. of bay

2 2

b 66KV PT Bay

No. of bay

2 2

c 66KV Line Bay

No. of bay

6 6

d 66/11KV, 5MVA Station Transformer

No. of bay

1 1


6

Droppers and Jumpering (equipment to equipment) with Twin Zebra ACSR conductor as per standards and approved drawings with provision of spacers suitable for 350mm spacing at 4.0 mtr interval. (The scope includes the cost of accessories ,spacers, BOlted type T- connectors etc.all items required for satisfactory operation.

a 220/66KV Transformer Bay (66KV side)

No. of bay

2 2

b 66KV Bus Coupler Bay

No. of bay

1 1

E

Supply and Erection of General purpose equipments and materials as per respective technical specifications and relevant special conditions.

1

Suitable arrangement of 11KV connection from existing 66 KV Sartanpar S/S to distribution tr (11/0.415kV) with required 22kV CT, its junction box, support structure insulated conductor and DP structure with DO fuse, 22kV BPIs arrangement for protection of dist transformer and mounting arrangement of Dist box suitable to dist transformer.

Package

LS LS

1 AC unit 3 Ton Split for Control room (5 star rating and reputed make) No. 3 3

2 AC unit 1.5 Ton Split for Office.(5 star rating and reputed make) No. 2 2

3 AC unit 3 Ton Split for PLCC Room.(5 star rating and reputed make) No. 2 2

4

Distribution Transformer 500 kVA with suitable Dist. Box and its fixing -mounting arragement.

Set 1 1

5 Providing major spares as per Ann A attached herewith Set 0 1

6 Providing instruments as per Ann B attached herewith Set 0 1

7 Providing tools and tackles etc. as per Ann C attached herewith Set 0 1

8 Providing Furniture, RO Water Filter, Water Cooler Set 0 1

9

Supply and Erection of Fire stand with 4 buckets including concreting as per our drawing & Instruction of E. I. C.

Set 1 1

10

Providing of Insulating Mat as per IS 15652:2006(Size2000x1000x2mm) in control room No. 0 50

11

Supply and installation of ISI marked fire extinguishers of various types required for 220 KV sub station.

1) Dry chemical powder type of 10 Kg. capacity. No. 0 2



4) Carbon dioxide ( CO2) gas type of capacity 6.5 Kg. capacity No. 0 2

5) Carbon dioxide (CO2) gas type of capacity 22.5 Kg. capacity No. 0 1

6) Mechanical Foam type of capacity 9 LT. No. 0 2

7) Mechanical Foam type of capacity 50 LT. No. 0 1


F

Supply and installation of materials for Illumination system in all respect as per respective specifications and special conditions ( Sucessful bidder has to submit the complete design and BOQ for approval)

1

Providing & Fixing of Energy Efficient T5 type Indoor decorative luminaries in all the rooms of control room building complete (ref. Ann-4 Item (A)) as per technical spec Cl No. 2.10.4.8 (EEI type ) as per design with respect to required lux level and relevant tender drgs. with required industrial grade point wiring as per technical spec. Scope also includes providing and fixing of 15/5 A plug, Portable Emergency Light, Bell, Fan, Ex- Fan, DC Point, with requisite MCBs and DC 100W lamp , DC Plug etc all items as per Ann-4 Item (A) in following rooms

i Control Room

Package

LS LS

ii PLCC Room

Package

LS LS

iii Office

Package

LS LS

2

Providing & Fixing of Energy Efficient T5 Industrial type Indoor luminaries in all the rooms, passages of control room building complete (ref. Ann-4 item (A)) as per technical spec Cl No. 2.10.4.8 (EEI type) as per design with respect to required lux level and relevant tender drgs. with required industrial grade point wiring as per technical spec. Scope also includes providing and fixing of 15/5 A plug, Portable Emergency Light, Bell, Fan, Ex- Fan, DC Point, with requisite MCBs and DC 100W lamp,DC Plug etc all items as per Ann-4 Item (A) in following rooms, passages etc.

i Battery Room

Package

LS LS

ii LV Room

Package

LS LS

iii Store Room

Package

LS LS

iv Ramp Slope

Package

LS LS

v Veranda

Package

LS LS

vi Toilet Gents

Package

LS LS

vii WC

Package

LS LS

viii Toilet Ladies

Package

LS LS

ix Passage (Corridor)

Package

LS LS

x Water Room

Package

LS LS


3

Providing and fixing of flood light luminaries as per design for 220kV switch yard area with Philips/CGL/Bajaj/GE/Oshram make HPSV 150/250/400W lamp with energy efficient type choke (HF) with control gear box & ancillaries and suitable for mounting on structure at appropriate height ( as per design) as per specifications TS illuminations cl. no 2.10.4.8 with necessary GI fabrication & GI bolt nuts to fix control gear box at the structure with complete internal and external wiring to J. box ,Dist panel/section feeder pillar etc with supply of required 3 c x 2.5 mm2 copper armoured cable (as per spec ) .The scope includes supply and erection of all the materials required for satisfactory functioning of above work.

Package

LS LS

4

Providing and fixing of flood light luminaries as per design for 66kV switch yard area with Philips/CGL/Bajaj/GE/Oshram make HPSV 150/250W lamp with energy efficient type choke (HF) with control gear box & ancillaries and suitable for mounting on structure at appropriate height ( as per design) as per specifications TS illuminations cl. no 2.10.4.8 with necessary GI fabrication & GI bolt nuts to fix control gear box at the structure with complete internal and external wiring to J. box ,Dist panel/section feeder pillar etc with supply of required 3 c x 2.5 mm2 copper armoured cable (as per spec ) .The scope includes supply and erection of all the materials required for satisfactory functioning of above work.

Package

LS LS

5

Providing and installation of post top lantern for main gate and road from main gate to swichyard via control room as per design with Philips/CGL/Bajaj/GE/Oshram make and energy efficient type suitable wattage lamp with control gear box & ancillaries suitable for mounting on Gate pillars and 4.5 mtr poles with necessary GI fabrication & GI bolt nuts to fix control gear box with complete internal and external wiring to J.box,Dist panel/section feeder pillar, fixing terminal etc. with supply of required 3 c x 2.5 mm2 copper armoured cable as per spec .This also includes the supply and erection of required 4.5 mtr poles and its foundation work as per spec and earthing with main mesh. The scope includes supply and erection of all the materials required for satisfactory functioning of above work.

Package

LS LS

6

Providing & Fixing of Energy Efficient Indoor 2x36 Tube light for Quaters, Security Building, Store Building etc. in all the rooms, passages complete (ref. Ann-4 Item (B,C&D)) as per technical spec with required casing caping point wiring as per technical spec. Scope also includes providing and fixing of 15/5 A plug, Portable Emergency Light, Bell, Fan, Ex- Fan,with requisite MCBs and as per Ann-4 Item (B,C&D)

Package LS LS


7

Providing and fixing of street light luminaries for remaining area (like road, peripheral area etc.) of switch yard complete as per design with Philips/CGL/Bajaj/GE/Oshram make and energy efficient type 70 W (or suitable wattage )lamp with control gear box & ancillaries suitable for mounting on 7.0 mtr swaged poles as per spec.TS illuminations cl. no 2.10.4.8 (EEO2) at appropriate height with necessary GI fabrication & GI bolt nuts to fix control gear box with complete internal and external wiring to J. box ,dist panel/section feeder pillar, fixing terminal etc with supply of required 3 c x 2.5 mm2 copper armoured cable (as per spec). This also includes the supply and erection of 7.0 mtr swaged pole and foundation work as per spec. and panting with two coats of primer and two priming of zinc chromate as well as earthing with main mesh. The scope includes supply and erection of all the materials required for satisfactory functioning of above work.

Package

LS LS

8

Supply and Erection of main lighting Panel ACP-1 as per Specifications. Set comprises minimum 2 nos.of such panels qty may be more if required as per design.Scope also includes the providing and erection of 25x6 GI strip for earthing with main mesh

Set 1 1

9

Supply and Erection of main lighting Panel ACP-2 as per Specifications Set comprises minimum 4 nos.of such panels qty may be more if required as per design.Scope also includes the providing and erection of 25x6 GI strip for earthing with main mesh

Set 1 1

10


Set 1 1

11


Set 1 1

12

Supply and Erection of main Yard light Dist. Board as per designed capacity ratings.Scope also includes the providing and erection of 50x6 GI strip for earthing with main mesh

Nos 2 2

13

Providing of concreting in 1:2:4 mix including muffing for erection of pole & Dist boxes panels including excavation of HR/SR as per approved drawing.

Package

LS LS

14

Providing & fixing of ' B ' Class ISI marked GI pipe of 25 mm inner diameter for cable looping, road crossing with necessary elbow / band to J. Box etc.

Package

LS LS


15

Providing and fixing of GI clamp (25mm wide GI strip with 6 mm GI nut bolts) on structure at approx. 1/2 Mtr. Interval for clamping of cable . Clamp should be fix in such a way that cable can be easily mount inside it & sustain standing on structure. This also includes required other materials ,accessories required for complete functioning of Illumination system of whole project (switch yard and all buildings, structures) those are not covered in this schedule for Illumination. Please refer the drawing "General Schematic for Illumination" in the TS Illumination.

Package

LS LS

Note: The qunatities of the ACP's mentioned in the schedule of requirement are based on std. requirement, which shall be finalised during detail engineering. The bidder has to assess the qty. of ACP's at the time of quoting the bid. The qty of ACP's finalised during detail engineering is binding to the bidder & no any extra payment shall be made. In all the case the decision of GETCO will be final.

G

Supply and installation of materials for Earthing system in all respect as per respective specifications and special conditions ( Sucessful bidder has to submit the complete design and BOQ for approval)

1

Supply and Installation of earthing strips/round bars as shown below including digging of 600 mm depth and 450 mm wide trench fixing on structure as per std equipment earthing phylosophy incuding fixing arrangement with two bolt arrangement, jointing, welding etc. complete.

a) 75 x 10 mm GI strip. RMt. 9500 9500

b) 50 x 6 mm GI strip. RMt. 6000 6000

c) 40 mm dia steel rod RMt. 21650 21650

d) 40mm dia 3mtr long steel rod Nos. 110 110

e) 75X10 mm CU Flat RMt. 80 80

f) Cleats for Equipment earthing risers support Nos. 2150 2150

g) 7/3.15 Earth wire for earthing of Towers with peak RMt. 1900 1900

2

Providing and installing Check pit as per drawing and instruction of Engineer In charge with provision of earth chamber.

Nos. 6 6

3

Installation of treated pipe electrode providing 100 mm inner diameter CI pipe of 13 mm thickness and 3000 mm length as per GETCO drg No P011. Work includes fabrication and fixing of GI strips for earthing connection

Nos. 90 90

4

Providing BB masonary inspection chamber (man hole) incl.light type CI cover as per GETCO drawing no P011

Nos. 90 90

Note: Extra earth should be removed away from the site s/s premises or refilling earthing pits if required. All required materials for this job such as CI pipe, CI cover with frame, salt, cement, sand, charcoal/bentonite, gravel, bricks etc. to be supplied by the contractor.

H

Supply and Erection of Ladder Type Cable Trays and Accesories as per respective Technical Specifications and relevant special conditions.

Width of tray

450mm

Rmtr.

1500 1500

350mm Rmtr 270 270


.

Length: Standard length of tray is 2500mm, Height is 75mm, Thickness is 2mm (min.)

Note: Cross, Tees, Elbows, Coupler plates, Bends, Reducer etc. required for complete installation of Ladder Type Tray are included in the Scope.

Note: The Connectors of the Bushings of 220 kV & 66 kV Hybrid Modules shall be compression type terminal connectors only.

I

Supply, Erection, Testing and Commissioning of Protection equipments and materials as per respective technical specifications and relevant special conditions and suitable for Two Main Bus system on 220kV side

1 Control & Protection panels for 220KV Bays ( Control Voltage - 220V DC ) as per tech specifications & suitable for Hybrid switchgear modules with following break up

1A) Control & Protection panel for line with Distance protection relays as Main-I & Main-II Set 8 8

1B) Control & Protection panel for line with Line Differential protection relays as Main-I & Main-II Set 2 2

A2

Supply, Erection, Testing and Commissioning of Protection equipments and materials as per respective technical specifications and relevant special conditions and suitable for consumer end bus system on 220KV side (will be conveyed during detailed engineering)

A2.1

Control & Relay Panel for 220kV Suva feeder bays at consumer end substation ( Control Voltage - 110/220V DC ) which are connected with short lines (i.e. with lines having length < 5Km) to Suva s/s as per tech specifications with following break up.

a) Control & Relay Panel for 220kV lines with Line Differential Protection relay as Main-I & Main-II Protection

Set 2 2

2 Control & Protection panel for Transformer with Differential Set 2 2

3 Control & Protection panel for BC Set 1 1

4

Busbar Protection - (Central Unit - 24 bays, Paripheral Units -13 Bays) [CU shall be mounted in one of the bay control & protection panel while PUs shall be mounted in respective bay control and protection panels as shown in panel GA drawing]

Set 1 1

2 GPS based Time Syncronising Unit (IEC 61850 compatible) Set 1 1

J

Supply, Erection, Testing and Commissioning of Protection equipments and materials as per respective technical specifications and relevant special conditions and suitable for Two Main Bus system on 66kV side

1

Control & Protection Panel for 66kV bays ( Control Voltage - 220V DC ) as per tech specifications & suitable for Hybrid switchgear modules with following break up.

1) Control & Protection Panel for Line Set 6 6

2) Control & Protection Panel for Buscoupler Set 1 1


3) Control & Protection Panel for Transformer W/O Differential Relay Set 2 2

4) Control & Protection panel for Transformer with Differential

Set 1 1

5) Under Frequency Panel Set 1 1

K

Supply and Erection of General purpose equipments and materials as per respective technical specifications and relevant special conditions and suitable for Two Main Bus scheme on 220kV as well as 66kV side.

1 Battery set - 220 V, 350Ah (2 V, 110 cells) Plante´ type Lead Acid Battery Set with FRP stand of adequate size

No. 2 2

2 Battery Charger - 220 V (Float - 70A / Boost - 70A) - (SCADA compatible) No. 2 2

3 DCDB-220 V with 35 Feeder No. 0 0

4 DCDB-220 V with 20 Feeder No. 4 4

5 LTPB - (SCADA compatible) No. 2 2

L Supply and installation of materials/item for Power Cable and control Cable wiring including preparation of wiring schedule.

1

Supply and Laying of 1.1 kV PVC armoured copper/Aluminum control/LT power cable in trench including binding/clamping of cable with PVC

locable wire tie as per requirement including supply and fixing of identification tags on both ends and at distance of every 100mtr. (Note :- Aluminium cables of size 185 mm

2 & above shall be XLPE type)

1) 2c x 2.5 mm2, copper control cable Mtr. 550 550

2) 2c x 4 mm2 , copper control cable Mtr. 6900 6900

3) 4cx2.5 mm2, copper control cable Mtr. 3400 3400

4) 4c x 4 mm2 , copper control cable Mtr. 7500 7500



7) 12c x 4 mm2, copper control cable Mtr. 1400 1400

8) 19c x 2.5 mm2 , copper control cable Mtr. 3500 3500

9) 27c x 2.5 mm2 , copper control cable Mtr. 2550 2550

10A) 1 x 50 mm2 , copper cable Mtr. 2500 2500

10B) 4C x 10 mm2 , copper control cable Mtr. 200 200

12) 3.5 x 25 mm2 , Al. armoured LT cable Mtr. 200 200

13) 3.5 x 50 mm2 , Al. armoured LT cable Mtr. 1000 1000

15) 1C x 150 mm2 , Al. armoured LT cable Mtr. 2150 2150

Termination of the control cable at panel / MK box/equipment including PVC binding dressing/shaping drilling of holes in panels for glands nuts for following size. The work also includes Looping in panel and MK box with using crimping type of lugs of suitable size with ferruling with proper size of copper cable wire. The loops should be bunched with using button tape and proper shaping etc.

1) cables from 2 core to 7 core of 2.5 & 4.0 Sq.mm size No. 700 700

2

2) cables above 7 core No. 650 650


Laying of 1.1kv PVC/XLPE armored Al. LT power cable in ground by digging trench of suitable width and 450 mm depth with providing and fixing of brick and sand layer covering the cable in any type of soil and Laying of 1.1kv PVC armored copper control cable in heavy duty PVC pipe of suitable size buried in ground by digging trench of suitable width and 450 mm depth in any type of soil including supply and fixing of Pipe and identification tags at distance of every 100 Mtrs for following size

1) Control Cables upto 7 core Mtr. 300 300

3

2) Control Cables above 7 core and all LT cables Mtr. 150 150

3a

Supply, Erection, Testing and Commissioning of Modular Multi-diameter Cable sealing system as per respective technical specification and relevant special conditions wherever the electrical / instrumentation / communication / LT Power cable underground and over-ground enter or leave bay kiosks / control room of substations / cable trench / basement.

LS Package

Providing and fixing of 50mm dia 'B' class GI pipes with necessary size of band and couplings for control cable protection of CT, PT/CVT etc. equipments including fixing with structures as per instruction of Engineer-in-charge.

1) 220 kV Switch Yard Mtr. 100 100

4

2) 66 kV switch yard Mtr. 25 25

Providing and fixing of 100mm dia 'B' class GI pipes with necessary size of band and couplings for control cable protection of CB, Isolator etc.equipments including fixing with structures as per instruction of Engineer-in-charge.


4a


Providing and fixing of GI tray of suitable size with necessary size of bands & joints and top covers for cable protection of LCC as per instruction of Engineer-in-charge.


4b


6 Providing and fixing Yard LT ACDB as per tech spec -with 20 OG feeders No. 2 2

7 Providing and fixing Yard LT ACDB as per tech spec -with 12 OG feeders No. 2 2

8

Providing and fixing of all weather proof, cold rolled sheet steel junction box for CVT & PT, CT terminations with 30 Nos. of disconnecting type, 'Elmex' make CATDM 4 or equivalent type connectors and required no of fuses, links etc.as per instruction of Engineer-in-charge.

No. 4 4

M Supply, Erection, Testing and Commissioning of SCADA equipments and materials as per respective technical specifications and relevant special conditions and suitable for Two Main Bus system on 220kV and 66KV side

1 Bay Control Unit / RTU for Substation Auxiliaries # Nos 1 1

2 Bay Control Unit for Protection Coupler of PLCC/FOTE ** Nos 1 1

3 HMI Server computer with required softwares Nos 1 1

4 DR workstation PC No. 1 1


5 Gateway for remote control with software No 1 1

6 Gateway for RTU Data with software No 1 1

7 SCADA software (For Local & Remote control centre) No 1 1

8 Ethernet Fiber Switches* Nos 12 12

9 Line Interface unit - 2 Cable entry, 12 ports Nos 17 17


15 Laser Jet Printer Nos 1 1

16 3KVA UPS with battery (12V, 26AH X 30 Nos, SMF Battery) Nos 1 1

17 3KVA UPS without battery Nos 1 1

18 Modem for RTU Data Nos 0 0

19 Armoured Fibre Optic Cable with HDPE duct

MTR.

2300 2300

21 Yard Kiosk for 220KV Switchyard including civil foundation work [ As per Annexure-G]

Internal Dimensions - 4000 (L) X 3500 (W) X 3300 (H) mm Nos 7 7


23 Yard Kiosk for 66KV Switchyard [ As per Annexure-G]


23 Panel for mounting SCADA equipments Nos 1 1

24 Panel for mounting PLCC/FOTE BCU Nos 1 1

25 Panel for mounting Station Auxiliaries BCU/RTU Nos 1 1

26 False Flooring in SCADA Room of Control Building as per following ANNEXURE - 1

Sq Mtr

75 75

Spares for SCADA and Protection

1 Bay Control Unit Nos 1 1

2 Line Interface Unit - 8 Cable entry, 32 ports Nos 1 1

3 Ethernet fiber switch Nos 1 1

4 Busbar Protection Peripheral Unit Nos 1 1

N

SCADA BOQ for 220KV Dahej Sub Station (to control 220KV Suva S/S)

N Supply, Erection, Testing and Commissioning of SCADA equipments and materials as per respective technical specifications and relevant special conditions.

1 HMI Server computer with required softwares Nos 2 2

2 DR workstation PC Nos 1 1

5 Ethernet Fiber Switch* Nos 2 2


8 Laser Jet colour Printer Nos 1 1

9 Laser Jet Printer Nos 1 1

10 3KVA UPS with battery (12V, 26AH X 30 Nos, SMF Battery) Nos 1 1

16 Panel for mounting SCADA equipments Nos 1 1

O PLCC BOQ

1 220kV ,4400PF CVT (having two windings with VA burden 50 & 50 and having accuracy of 3P & 0.2 class for protection & metering core respectively) with clamp/connectors & supporting structure. The interconnection from HF terminal of CVT to PLCC coupling device shall be made using 16 Sq.mm PVC insulated stranded (non flexible strands) copper cable.

No. 26 26


2 220kV, 0.5mH, 1250Amp Wave Trap with Blocking Band of, Band-(I)-100-160 & Band-(II) 150-500KHz and R min = 570 Ohm and single point suspension arrangement with three tie rod assembly including insulator string assembly, clamp/connectors and require accessories.

No. 20 20

3 Modular coupling device MCD-80, Make: ABB (Set comprising of 1 No. of A9BS & 1 No. of A9BT) for Phase to Phase coupling arrangement for PLCC signal connectivity. Set 10 10

4 40 Watt single channel fully programmable carrier terminal of Make: ABB &Type: ETL-41, No. 8 8

5 Protection coupler Make: ABB & Type: NSD-50 with 2 coded & 2 uncoded command arrangement & perfectly match with above carrier terminal description of which given at Sr. No. 4 above. No. 8 8

6 FSK Data Modem Make: ABB & Type: NSK 5, Programmable for both Baud Rate (50 to 2400 Baud) and VFT Channel Centre Frequency and fully compatible with 40W fully programmable Carrier terminal Type :ETL-41, Make: ABB .

No. Nil 1

7 FSK Data Modem with stand alone 19" rack with power supply module ,Make: ABB & Type: NSK 5, Programmable for both Baud Rate (50 to 2400 Baud) and VFT Channel Centre Frequency and fully compatible with 40W fully programmable Carrier terminal Type :ETL-41,

No. 1 1

8 50 Volt, 350AH capacity, storage Low Maintenance , High performance Lead acid Battery set with accessories & FRP stand

set (25 cells/set)

1 1

9 SCADA Compatible Float & boost charger suitable for 50Volt, 350AH capacity battery with float 0/p volt : 50 to 58 volt, 40 Amp, Boost 0/p : 50 to 72V, 35 Amp with Variac & Servo Motor mechanism for Auto Operation for DC O/P Voltage Adjustment of Float Charger as per technical specification.

No. 1 1

10 DCDB with 20 Nos. of Feeders (6 Amp each) for DC supply to PLCC panels & Exchange as per technical Specification. No. 1 1

11 laying of 75 Ohm, unbalanced armoured co-axial cable for PLCC signal connectivity and providing UHF gland on both the ends of each main cable length to be laid for PLCC carrier room to bay gentry and loop cable for Ph to Ph coupling arrangement.

KM 5.5 5.5

12 PLCC Exchange preferably of Make: MATRIX, Type Eternity 10S with 8 Nos. of Trunks & 8 Nos. of Subscribers suitable for both PLCC Dialling and Express Communication connectivity with Universal slot architecture and Hot stand by Power supply and CPU along with the push button type telephone instrument (8 Nos.) of reputed make for subscribe extension and Digital Key phone (4 Nos.) for express point to point connectivity.

No. 1 1

13 DAS Meters network wiring complete up to RS 485 to RS 232 Convertor of DAS PC using

a) 3 core communication cable (as per specification given hereunder) Mtr. 200 200


b) RS 485 to RS 232 Converter (as per specification given hereunder) No. 1 1

21 DAS PC with printer as per TS No. 1 1

P Design, Supply of materials & construction of RCC Foundation of Hybrid modules including required foundation bolts and materials.

1 220kV DBB Hybrid switchgear module for 220kV line bay & 220/66 kV Transformer bay

No. 13 0


4 66kV DBB Hybrid Switchgear Module for 66kV line bay & (66kV side) 220/66kV Transformer bay

No. 10 0


Note:

1) Any material/equipment accessories which are not listed in BOQ or in scope of supply but required to

complete the job shall be included and shown in technical bid.

2)*Ethernet switches shall have as many spare ports as utilized ports.

3) ** PLCC/ FOTE BCU shall have sufficient I/Os as per given list.

4) # BCU for station Auxiliary shall have sufficient I/Os as per list or otherwise suitable RTU shall be provided.

1) Supply & Erection of 220/66KV Transformer is not in the scope of awardee, but awardee will erect the itmes other than the scope of transformer manufacturer and witness during the erection and testing of the same and provide all the result in as built drawings/documents. 2) Terminal Clamp & Connectors shall be provided as per, details of conductor shown in, drawings of Layout Plan & Section. 3) The Connectors of the Bushings of 220 kV & 66 kV Hybrid Modules must be compression type terminal connectors only. 4) 31mm/kV creepage distance is considered due to high pollution level of site.

5) The fabricated structures of gantries and equipments shall have a minimum overall Zinc coating of 900 gm/sq. m of surface are except for plates and sections below 5 mm which shall have a minimum overall Zinc coating 610/sq.m of surface area. The average Zinc coating for all sections and plates 5 mm and above shall be maintained minimum 127 microns and that for plates and sections below 5 mm shall be aintained minimum 87 microns.

BREAK UP OF SWITCHYARD BOQ FOR 220KV SUVA SS

Sr.No.

Particulars of Item Unit Erection Qty

Supply Qty

B

Supply and Erection of 220kV Switchyard materials considering 31mm/kV creepage distance due to marine atmosphere of site as per respective technical specifications and relevant special conditions suitable for Two Main Bus with Quad ACSR Moose conductor and relevant Flyover Bus with Twin ACSR Moose conductor. ,


5

Stringing of bus with Quad Moose ACSR conductor for all the three phases with required insulators, hardwares & accessories, spacers provided at every 3.0 mtr. interval etc. complete as per relevant standards and approved drawings with Jumpers for continuous Bus Arrangement (It includes cost of Conductor,insulators, hardwares & accessories, spacers etc.all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor).

a Main Bus with 36Mtr span including bus jumpers

No. of Span 18 18

ACSR Moose Conductor per Span Rmtr. 432 432

Insulators-120KN AF Per Span No. 216 216

Double Tension H/W & Acc with Turn Buckle.-Quad Moose ACSR Per Span

No. 3 3

Double Tension H/W & Acc without Turn Buckle.-Quad Moose ACSR Per Span

No. 3 3

Spacers suitable for Quad Moose ACSR (350mm Spacing) in Main Bus Per Span

No. 33 33

6

Stringing of Earth Wire with 7/3.15 GS wire with required hardwares & accessories etc. complete as per standards and approved drawings for span of 36 meters.(It includes cost of Earthwire,hardwares & accessories etc. all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor)

Span 10 10

Earthwire per Span Rmtr. 36 36

Earthwire Access.- Suitable for 7/3.15 GS per span No. 2 2

7

Droppers (including required suspension string with hardware & accessories if any) & Jumpers (including Equipment to Equipment) with Twin Moose ACSR conductor as per standards and approved drawings with provision of required spacers (Suitable for 350mm spacing) at every 3.0 mtr. interval (It includes cost of Conductor,insulators, hardwares & accessories, Fire Wedge connectors, spacers etc.all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor)-Qty. per bay of 3phase

a 220/66KV Transformer Bay (220KV Side) No. of bay 2 2

ACSR Moose Conductor per Bay Rmtr. 360 360

Spacers suitable for Twin Moose ACSR (350mm Spacing) Per Bay

No. 40 40

Bolted type T-Connectors suitable for Moose ACSR to Moose ACSR Per bay

No. 12 12

b 220KV Line Bay No. of bay 10 10


Insulators-120KN AF Per Bay No. 54 54

Single Suspension H/W & Acc.-Twin Moose ACSR Per Bay No. 3 3


No. 33 33

Bolted type T-Connectors suitable for Moose ACSR to Moose ACSR Per bay (From Bus)

No. 12 12

Fire Wedge Connectors suitable for Zebra ACSR to Moose ACSR Per bay

No. 6 6

c 220KV Bus Coupler Bay No. of bay 1 1




No. 30 30

Bolted type T-Connectors suitable for Moose ACSR to Moose ACSR Per bay (From Bus)

No. 12 12

9

Droppers (including required suspension string with hardware & accessories, if any) & Jumpers with Single Moose ACSR conductor as per standards and approved drawings (It includes cost of Conductor,insulators, hardwares & accessories, Fire Wedge Connectors, etc.all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor)-Qty. per bay of 3phase

a 220kV Line Bay-LA & CVT No. of

Bays 10 10


Fire Wedge Connectors suitable for Zebra ACSR to Moose ACSR Per bay

No. 5 5

b 220KV PT Bay No. of

Bays 2 2


D

Supply and Erection of 66kV Switch Yard Material considering 31mm/kV creepage distance due to marine atmosphere of site as per respective technical specifications and relevant special conditions suitable for Two Main Bus with Twin ACSR Zebra conductor scheme & relevant Flyover Bus with Twin ACSR Zebra conductor.

3

Stringing of bus for all the three phases with Twin Zebra ACSR conductor, insulators hardwares, spacers(suitable for 350mm spacing) at interval of 4.0 mtr complete as per relevant standards and approved drawings.The scope includes the cost of Conductor,insulators, hardwares, accessories, spacers etc.all items required for satisfactory operation. Any variation in quantities shall be absorbed by erection contractor)-Qty. per span/bay of 3phase

a Main Bus with 34.4 Mtr. Span including bus jumpers Span 2 2

ACSR Zebra Conductor per Span Rmtr. 206.4 206.4

Insulators-90KN AF Per Span No. 72 72 Double Tension H/W & Acc. With Turn Buckle suitable for

Twin Zebra ACSR cond. & 90KN Insulator disc Per Span No.

3 3

Double Tension H/W & Acc. Without Turn Buckle suitable for Twin Zebra ACSR cond. & 90KN Insulator disc Per Span

No. 3 3

Spacers suitable for Twin Zebra ACSR (350mm Spacing) Per Span

No. 21 21

b Main Bus with 31.9 Mtr. Span including bus jumpers Span 2 2

ACSR Zebra Conductor per Span Rmtr. 191.4 191.4 Insulators-90KN AF Per Span No. 72 72 Double Tension H/W & Acc. With Turn Buckle suitable for

Twin Zebra ACSR cond. & 90KN Insulator disc Per Span No.

3 3


No. 3 3


No. 21 21

c Main Bus with 30.9 Mtr. Span including bus jumpers Span 4 4

ACSR Zebra Conductor per Span Rmtr. 185.4 185.4


Insulators-90KN AF Per Span No. 72 72

Double Tension H/W & Acc. With Turn Buckle suitable for Twin Zebra ACSR cond. & 90KN Insulator disc Per Span

No. 3 3


No. 3 3


No. 18 18

f 220/66KV Transformer flyover bus with 42.0 Mtr. Span (66KV side) No. of bay 2 2

ACSR Zebra Conductor per Span Rmtr. 252 252 Insulators-90KN AF Per Span No. 72 72

Double Tension H/W & Acc. With Turn Buckle suitable for Twin Zebra ACSR cond. & 90KN Insulator disc Per Span

No. 3 3


No. 3 3


No. 24 24

4

Stringing of Earth Wire with 7/3.15 GS wire with required hardwares & accessories (including spike reqd, if any) etc. complete as per standards and approved drawings for the shown span. (It includes cost of Earthwire,hardwares & accessories etc. all items for satisfactory functioning. Any variation in quantities should be absorbed by erection contractor)

a Main Bus with 34.400 Mtr. Span Span 2 2

Earthwire per Span Rmtr. 34.4 34.4 Earthwire Access.- Suitable for 7/3.15 GS per span No. 2 2

b Main Bus with 31.900 Mtr. Span Span 2 2 Earthwire per Span Rmtr. 31.9 31.9

Earthwire Access.- Suitable for 7/3.15 GS per span No. 2 2 c Main Bus with 30.900 Mtr. Span Span 4 4 Earthwire per Span Rmtr. 30.9 30.9

Earthwire Access.- Suitable for 7/3.15 GS per span No. 2 2 d 220/66KV Transformer flyover bus with 42.0 Mtr. Span

(66KV side) No. of bay 4 4

Earthwire per Span Rmtr. 42 42 Earthwire Access.- Suitable for 7/3.15 GS per span No. 2 2

5

Droppers (including required suspension string with hardware & accessories if any) & Jumpers with Single Moose ACSR conductor as per standards and approved drawings. (It includes cost of Conductor,insulators, hardwares & accessories etc. all items required for satisfactory functioning. Any variation in quantities shall be absorbed by erection contractor).-Qty. per bay of 3phase

a 220/66KV Transformer Bay (66KV Side) - LA No. of bay 2 2

ACSR Moose Conductor per Bay Rmtr. 19 19 Fire Wedge Connectors suitable for Zebra ACSR to Moose

ACSR Per bay No.

6 6

Fire Wedge Connectors suitable for Moose ACSR to Moose ACSR Per bay

No. 3 3

b 66KV PT Bay No. of bay 2 2


c 66KV Line Bay No. of bay 6 6



Bolted typeT-Connectors suitable for Zebra ACSR to Moose ACSR Per bay

No. 12 12


No. 6 6

Connectors suitable to provide connection between 66kV Cable and Single Moose ACSR cond. Per bay (LA)

No. 3 3

d 66/11KV Transformer Bay No. of bay 1 1

ACSR Moose Conductor per Bay Rmtr. 90 90 Bolted typeT-Connectors suitable for Zebra ACSR to

Moose ACSR Per bay No.

12 12


No. 6 6

6

Droppers (including required suspension string with hardware & accessories if any) and Jumpering (equipment to equipment) with Twin Zebra ACSR conductor as per standards and approved drawings with provision of spacers suitable for 350mm spacing at 4.0 mtr interval. (It includes cost of conductor,insulators, hardwares & accessories etc. all items required for satisfactory functioning. Any variation in quantities shall be absorbed by erection contractor).-Qty. per bay of 3phase

a 220/66KV Transformer Bay (66KV Side) No. of bay 2 2

ACSR Zebra Conductor per Bay Rmtr. 200 200

Insulators-90KN AF Per Bay No. 18 18 Single Suspension H/W & Acc.suitable for Twin Zebra

ACSR Cond. And 90KN Insulator disc- Per Bay No.

3 3

Spacers suitable for Twin Zebra ACSR (350mm Spacing) Per Bay

No. 24 24

Bolted typeT-Connectors suitable for Zebra ACSR to Zebra ACSR Per bay

No. 12 12

b 66KV Bus Coupler Bay No. of bay 1 1

ACSR Zebra Conductor per Bay Rmtr. 92 92 Spacers suitable for Twin Zebra ACSR (350mm Spacing)

Per Bay No.

6 6

Bolted typeT-Connectors suitable for Zebra ACSR to Zebra ACSR Per bay

No. 12 12


Annexure - 4

Building Detail

Sr. No.

Location

Area X x Y Mtr.

Ht. in Mtr.

Avg Illuminatio

n level Required in

LUX

AC 1.5 T

Split

AC 3 T Spli

t

15 A Plug

5 A Plug

Fan

Ex Fan

DC Point

DC Plug

Portable Emergen

cy Lighting

Bell 3 ph.wtih neutral 15A test plug

A Control Room

1 Control Room 8.8x8.5 4 300 0 3 4 3 2 0 2 1 1 1 1

2 Battery Room 8.8x8.5 4 100 0 0 0 3 2 4 1 0 0 0 0

3 LV Room 8.8x8.5 4 150 0 0 2 2 2 0 1 0 1 0 1

4 PLCC Room 9.8x5.5 4 300 0 2 2 2 2 0 1 0 1 1 0

5 Store Room 5.8x5.5 4 100 0 0 2 2 1 0 0 0 0 0 0

6 Ramp Slope 2x3.6 4 100 0 0 1 1 0 0 0 0 0 0 0

7 Veranda 2.0x17.9 2.5 70 0 0 0 2 0 0 0 0 0 0 0

8 Office 6.8x8.5 4 300 2 0 2 2 1 0 0 0 0 2 0

9 Toilet Gens 2.2x1.5 4 70 0 0 0 1 0 1 0 0 0 0 0

10 WC 1.5x0.9 4 70 0 0 0 1 0 1 0 0 0 0 0

11 Toilet Ladies 2.5x1.7 4 70 0 0 0 1 0 1 0 0 0 0 0

12

Passage (Corridor) 15.8x2.8 4 70 0 0 0 2 0 0 0 0 1 0 0

13 Ramp Slope 3.6x2 4 100 0 0 1 1 0 0 0 0 0 0 0

14 Veranda 6.2x2.1 2.5 70 0 0 0 2 0 0 0 0 0 0 0

B Quarters

B1 TYPE-4(GROUND


FLOOR) - 4units

1 Kitchen

2.84x2.13 3 70 0 0 2 4 1 2 0 0 0 0 0

2 Bed Room

3.35x2.74 3 150 0 0 1 4 2 0 0 0 0 1 0

3 Living Room

3.96x2.74 3 150 0 0 1 4 2 0 0 0 0 1 0

4 Balcony

2.305x1.13 3 70 0 0 0 1 0 0 0 0 0 0 0

5 Bath .91x2.13 3 70 0 0 1* 1 0 1 0 0 0 0 0

6 WC

.91x1.115 3 70 0 0 0 0 0 1 0 0 0 0 0

7 Stair 2.4x1.18 2.5 100 0 0 0 1 0 0 0 0 0 0 0

Note: * With 3 KW Geyser Arrangement

C Security Building

1

Sec. Officer cabin

3.0x2.655 3 300 2 0 2 2 2 0 0 0 0 1 0

2 Sec. Cabin

3.0x2.655 3 150 0 0 1 2 1 0 0 0 0 0 0

3 Toilet 1.455x1.2 3 70 0 0 0 1 0 1 0 0 0 0 0

4 W.C 1.115x1.2 3 70 0 0 0 0 0 1 0 0 0 0 0

D Store Building 19x8.5 4 150 0 0 2 4 0 4 0 0 1 0 0


Annexure - 5

Details of Illumniation for Switch yard Sr. No.

Location Details

1 200kV switch Yard

Upper Bus height 18.5 Mtr

Lower Bus height 12.5 Mtr

Equipments Height from Ground 5.5 Mtr+0.3 Mtr plinth

Lux level Required for main Equipments - 5.5 Mtr Height 50

Lux level rquired for Other area 20

2 66kV switch Yard

Upper Bus height 10 Mtr

Lower Bus height 7 Mtr

Equipments Height from Ground 4.0 Mtr+0.3 Mtr plinth

Lux level Required for main Equipments - 4 Mtr Height 50

Lux level rquired for Other area 20

Lux level required for follwing amminities

3 Car Parking Area 20

4 Main Roads (Post Top Lantern) 20

5 Sub Road (Street Light) 20

6 Fencing Light and Spare Area (Street Light) 20

7 Oil Filtration shed 70

8 Garden of Transit Camp (Post Top Lantern) 20

Note:

The area if not applicable as per layout of the project may please be ignored.


: A N N E X U R E - "A" :

Major spares and devices

Sr. No.

Particulars Quantity

(A) DG set ( portable three pahse 415V 10 KVA Honda make) 1 set

(B) Welding M/C: Input volt.230-440V(single/two phase), 50Hz, Insulation class A 200 Amp.

1 set

: A N N E X U R E - "B" :

Instruments

1 Computer set with UPS dust cover etc as per technical specifications ( for officer in charge)

1 set

2 A-4 size mono lasor printer as per technical specifications.( for officer In charge)

1 set

3 Earth Resistance Tester Digital GE-OHM C make (made in Germany) model no EN 61557/VDE 0413 or updated version with better features.

1 No

4 Clip on meter AC/DC V/I/OHM - 0-1000V, 0-25A Meco/Rishabh/Motwane Battery backup

1 No

5 Motor and manual Operated Oil BDV testing Kit –Motwanemake with 0-100kV range, auto cut off feature, with standard ball -cup and measuring gauge as per IS.

1 No

6 Thermo vision Camera with Notebook PC 1 set

7 DILO-SF6 Gas handling Kit 1 set

8 Hydraulic Platform 1 No.

: A N N E X U R E - "C" :

Tools & Tackles

1 Earthing Rod (Highly insulated FRP telescopic Earthing/ Discharge Rod.(18 ft, 3 sections) with cable suitable to discharge the charge of 220kV.

9

2 Spanner [Ring, Fixed, Box] Fix=10x11,12x13,14x15,,16x17Ring=10x11,12x13,14x15,16x17 Tubular=12x13,14x15,16x17,18x19 Screw driver=827I,927 Nut driver= 7mm

3 sets

3 Steel Roller - Size 1" 10

4 Aluminium Roller - Size 4" 5

5 one/two/three Wheel pulley - Size 1" 2

6 Winch Machine with Handle - 05 Ton Capacity 2

7 Hydraulic Press Machine - - 80 Kgs 2

8 Hand drill Wolf Make 240 V Capacity :- Hole up to 31 mm , Single Phase

1


9 Drill Machine - 5/8" Dia Wolf Make Standing Drill machine having 3 Feet Pillar & suitable for making Holes up to ¾”. Motor

2

10 Chain pulley block - 5 tonne capacity 2

11 Wire rope pully block - 02 Tonne 1 Set

12 Tent- Standard quality water proof Tent made from H.DP.E. Materials with 5 Nos of bamboos Rods and having capacity of 8 to 10 Person to stay & size 10 Ft x 10Ft Multipurpose

1 Set

13 Water pump Set - 5 HP 2

14 Water pump Set - 1 HP 2

15 Crowbar - 1.5 Mtr 1

16 Crowbar - 1.0 Mtr 1

17 Heavy hammer - 10Kg 1

18 Pickaxe ( Trikam) - 2 '' width with Handle 5

19 Pawda[shovel] - 12 '' width with Handle 5

20 Axe (Kuhadi) with Handle 5

21 Sythe (Dharia) with Handle 10

22 Tar Poline (Tad Patri) 5

23 Nylon Rope - 0.5" Dia -100 mtrs 1 Bundle

24 Nylon Rope 0.75" Dia - 100 mtrs 1 Bundle

25 Nylon Rope - 1" Dia - 100 mtrs 1 Bundle

26 Aluminium Ladder - 15 ft. Aluminium folding factory ladder (Heavy duty) made from high tensile aluminium alloy design no 152 AFFL 15 Ft height (4.56 mtrs) specification section= 15/8” X 1.1/4” Steps= 15/8 X 1.1/4 12”Center to Center

2

27 Telescopic aluminium ladder(3 sections) with platform - 25 ft 1

28 Oil Drum Lifter 1

29 Oil Hand pump 1

30 Cable Drum Lifter 1

31 Cable Drum 1

32 Turn Table - Cable Drum 1

33 Hand cart - 2 tonne capacity With steel body 1

34 Hot air blower Small Capacity =1.5m3/min, Big Capacity =2.0m3/min

1 no each

35 Vaccum cleaner - Eureka Forbes Make 1

SAFETY TOOLS

1 Safety belt Full body covering and Half body covering

15 each

2 Halmet with ISI mark of repute make 10 Nos


3 Hand Gloves Hand gloves of quality as per IS certification 4770 & test potential 7500Volt

6 pair

4 Gum boot (Pair) - Size 8,9,10. - Standard make 3 pair for each size

Illumination Luminaries

1 Energy efficient decorativeTube (spare as provided in control room illumination design)

10 Nos

Energy Efficient tube (spare as provided in switch yard illumination design)

10 Nos

2 CFL (spare as provided in illumination design) 10 Nos

3 LED indicating Lamps 22.5 10 Nos

Display Boards and others

1

Single line diagram drawn with radim paint suitable decorated on a board of approx size of 120x90 mmsuitable designed thickness with fixing arrangement in control room wall.

1 set

2

Key board with hook for different keys of each equipments/panels/cubicles with SLD drawn with color approx size 2'x2'

1 set

Annexure- "D"

Supply of Furniture, RO Water Filter System, Water Cooler Etc.

Sr. No.

Particulars Quantity

Furniture for 220KV S/S

a) Steel chair "S" type, Overhanging arm with cushion with cane seat/back 1"X 16" gauge round pipe frame 3

b) Steel rack of size 30"X36"X15" with three partitions, prepared 20 gauges

2

c) Providing Control Room Table modular 5X5 Panta work surface with pedestal CPU Trolley & Key Board tray of Godrej or equivalent

1

d) Office table with SDU & pedestal 5026/3619 Godrej or equivalent +B124

2

d) Modular workstations of Godrej make or equivalent 4X2 Panta work surface with pedestal CPU trolley & keyboard Tray or equivalent

2

e) Revolving chair PCH 7001R of Godrej make or equivalent 4

1

f) Three seater perforated chair with powder coating(Bench) 1

2 RO water filter system 25Ltr. Capacity 1


3

Providing & installing SHRIRAM USHA or equivalent make water cooler of 40Ltr./hr. capacity suitable to operate on 230V+10% , 50Hz. Single phase AC supply with hermetically sealed type suction cooled compressor with overload protection confirming to IS 10617(Part-I) with amdt. 1 & 2. Item rate includes all charges including necessary piping of approved make & quality upto designated water supply point.

1

Annexure-G ( For Estimation Purpose only) [A] Prefabricated Kiosk size: 5000mmx3500mmx3300mm; 6000mmX3500mmX3300mm

Sr.No.

Description Unit Qty

1 Pre-fabricated Kiosk-5000mmx3500mmx3300mm Set 1 2 Air conditioning for prefabricated kiosk as per

specifications Set 1

3 Illumination for prefabricated AC Kiosk as per specifications

Lot 1

4 Civil foundation works for prefabricated AC kiosk (As per break up below)

Lot 1

5 Installation of Kiosk at site Lot 1 6 Freight Lot 1

Break up of Prefabricated AC Kiosk for Civil foundation work

Sr.No. of civil order


01 Excavation in all kind of hard, loose and slushy soils with all labour, tools, tackles and equipment. up to depth of 5M Including filling excavated trenches/zari around foundation and filling/leveling in plinth and depressions with surplus earth in layers not exceeding 150mm in depth & obtaining 90% protector density including spreading and leveling within plot premises and carting away extra earth out side S/S premises with any lead & lift etc. complete as directed. The rates will remain same in cases when excavation needs to be carried out with the help of mechanical means such as JCB or other earth movers. The rates are inclusive of dewatering and removal of mud if required. It also includes providing and fixing shoring strutting on the earth wall to prevent land slides. No

CMT 52.09919


extra amount will be paid for removal of land slides if it occurs, the contractor should take due care to prevent any land slide.

04 Providing and laying CEMENT CONCRETE 1:3:6 (1 cement : 3 coarse sand : 6 hand broken stone aggregates 40 mm nominal size) and curing consolidation with rammers complete including cost of form work in Foundation and Plinth… etc., completed as directed by E.I.C.

CMT 1.5170

05 Providing & laying machine mix CEMENT CONCRETE of grade M-20 for exposed work including the cost of necessary formwork, shuttering, scaffolding, watering, pouring & compacting with machine vibrator, curing after tying with jute bags on r.c.c surface, centering & shuttering in true line and level etc. but excluding cost of reinforcement in RCC work for such as FOUNDATION / FOOTING ,COLUMN, BEAMS, SLABS & COPINGS FOR ALL LEVEL for any type/size of cross sectional area... etc., completed as directed by E.I.C.

CMT 7.7890

07 Providing & Laying Reinforcement steel bars TMT Bar steel reinforcement TATA/Vizag make or approved equivalent confirming IS Fe-415 for all RCC work including cleaning of rust & dust, bending, fabricating, making dowels, hooks, rings, providing spacers, plastic or steel chairs, including binding or welding including wastage, placing in position with supply of 16-18 SWG black soft annealed wire with all materials, labours, tools, tackles and equivalent including all lead & lift etc. completed as per structral drg & details directed by E.I.C.

MT 0.86

[B] Prefabricated Kiosk size: 4000mmx3500mmx3300mm

Sr.No.


1 Pre-fabricated Kiosk-4000mmx3500mmx3300mm Set 1 2 Air conditioning for prefabricated kiosk as per

specifications Set 1

3 Illumination for prefabricated AC Kiosk as per specifications

Lot 1

4 Civil foundation works for prefabricated AC kiosk (As per break up below)

Lot 1

5 Installation of Kiosk at site Lot 1 6 Freight Lot 1

Break up of prefabricated AC Kiosk for Civil foundation work


Sr.No. of civil order


01 Excavation in all kind of hard, loose and slushy soils with all labour, tools, tackles and equipment. up to depth of 5M Including filling excavated trenches/zari around foundation and filling/leveling in plinth and depressions with surplus earth in layers not exceeding 150mm in depth & obtaining 90% protector density including spreading and leveling within plot premises and carting away extra earth out side S/S premises with any lead & lift etc. complete as directed. The rates will remain same in cases when excavation needs to be carried out with the help of mechanical means such as JCB or other earth movers. The rates are inclusive of dewatering and removal of mud if required. It also includes providing and fixing shoring strutting on the earth wall to prevent land slides. No extra amount will be paid for removal of land slides if it occurs, the contractor should take due care to prevent any land slide.

CMT 52.09919

04 Providing and laying CEMENT CONCRETE 1:3:6 (1 cement : 3 coarse sand : 6 hand broken stone aggregates 40 mm nominal size) and curing consolidation with rammers complete including cost of form work in Foundation and Plinth… etc., completed as directed by E.I.C.

CMT 1.5170

05 Providing & laying machine mix CEMENT CONCRETE of grade M-20 for exposed work including the cost of necessary formwork, shuttering, scaffolding, watering, pouring & compacting with machine vibrator, curing after tying with jute bags on r.c.c surface, centering & shuttering in true line and level etc. but excluding cost of reinforcement in RCC work for such as FOUNDATION / FOOTING ,COLUMN, BEAMS, SLABS & COPINGS FOR ALL LEVEL for any type/size of cross sectional area... etc., completed as directed by E.I.C.

CMT 7.7890

07 Providing & Laying Reinforcement steel bars TMT Bar steel reinforcement TATA/Vizag make or approved equivalent confirming IS Fe-415 for all RCC work including cleaning of rust & dust, bending, fabricating, making dowels, hooks, rings, providing spacers, plastic or steel chairs, including binding or welding including wastage, placing in position with supply of 16-18 SWG black soft annealed wire with all materials, labours, tools, tackles and equivalent including all lead & lift etc. compeleted as per structral drg & details directed by E.I.C.

MT 0.86


BREAK UP OF PLCC Items

Sr.No.

Particulars of Item Unit PLCC requirement for 220KV Bays at Sub-station end Supply

Qty.

Erection (Laying/Installation,testing &commissioning) Qty.

SUVA Dahej Kosamba Mobha Haldarva IPCL

1 220kV ,4400PF CVT (having two windings with VA burden 50 & 50 and accuracy of 0.2 & 3P class for metering & protection core respectively. The metering core shall be provided in seperate sealable compartment with locking facility) with clamp/connectors & supporting structure. The interconnection from HF terminal of CVT to PLCC coupling device shall be made using 16 Sq.mm PVC insulated stranded (non flexible strands) copper cable.

No. 16 2 2 2 2 2 26 26

2 220kV, 0.5mH, 1250Amp Wave Trap with Blocking Band of, Band-(I)-100-160 & Band-(II) 150-500KHz and R min = 570 Ohm and single point suspension arrangement with three tie rod assembly including insulator string assembly, clamp/connectors and require acce

No. 12 0 2 2 2 2 20 20


3 Modular coupling device MCD-80, Make: ABB (Set comprising of 1 No. of A9BS & 1 No. of A9BT) for Phase to Phase coupling arrangement for PLCC signal connectivity.

Set 6 0 1 1 1 1 10 10

4 40 Watt single channel fully programmable carrier terminal of Make: ABB &Type: ETL-41,

No. 6 0 0 0 1 1 8 8

5 Protection coupler Make: ABB & Type: NSD-50 with 2 coded & 2 uncoded command arrangement & perfectly match with above carrier terminal description of which given at Sr. No. 4 above.

No. 6 0 0 0 1 1 8 8

6 FSK Data Modem Make: ABB & Type: NSK 5, Programmable for both Baud Rate (50 to 2400 Baud) and VFT Channel Centre Frequency and fully compatible with 40W fully programmable Carrier terminal Type :ETL-41, Make: ABB .

No. 1 0 0 0 0 0 1 Nil

7 FSK Data Modem with stand alone 19" rack with power supply module ,Make: ABB & Type: NSK 5, Programmable for both Baud Rate (50 to 2400 Baud) and VFT Channel Centre Frequency and fully compatible with 40W fully programmable Carrier terminal Type :ETL-41, Make: ABB .

No. 1 0 0 0 0 0 1 1

8 50 Volt, 350AH capacity, storage Low Maintenance , High performance Lead acid Battery set with accessories & FRP stand

set (25

cells/set)

1 0 0 0 0 0 1 1


9 SCADA Compatible Float & boost charger suitable for 50Volt, 350AH capacity battery with float 0/p volt : 50 to 58 volt, 40 Amp, Boost 0/p : 50 to 72V, 35 Amp with Variac & Servo Motor mechanism for Auto Operation for DC O/P Voltage Adjustment of Float Charger as per technical specification.

No. 1 0 0 0 0 0 1 1

10 DCDB with 20 Nos. of Feeders (6 Amp each) for DC supply to PLCC panels & Exchange as per technical Specification.

No. 1 0 0 0 0 0 1 1

11 laying of 75 Ohm, unbalanced armoured co-axial cable for PLCC signal connectivity and providing UHF gland on both the ends of each main cable length to be laid for PLCC carrier room to bay gentry and loop cable for Ph to Ph coupling arrangement.

KM 3.3 0 0.55 0.55 0.55 0.55 5.5 5.5

12 PLCC Exchange preferably of Make: MATRIX, Type Eternity 10S with 16 Nos. of Trunks & 16 Nos. of Subscribers suitable for both PLCC Dialling and Express Communication connectivity with Universal slot architecture and Hot stand by Power supply and CPU along with the push button type telephone instrument (8 Nos.) of reputed make for subscribe extension and Digital Key phone (4 Nos.) for express point to point connectivity.

No. 1 0 0 0 0 0 1 1

13 DAS Meters network wiring complete up to RS 485 to RS 232 Convertor of DAS PC using

Job 1 0 0 0 0 0 0 1

a) 3 core communication cable (as per specification given hereunder)

Mtr. As per actual require

As per actual requirement


ment

b) RS 485 to RS 232 Converter (as per specification given hereunder)

No. 1 0 0 0 0 0 1 1

14 DAS PC with printer as per TS No. 1 0 0 0 0 0 1 1


THIS PAGE HAS BEEN KEPT BLANK INTENTIONALLY.


CIVIL BOQ FOR 220KV Suva(Rahiyad) S/S

CIVIL BOQ Name of Work: - Construction of C.R. building, Structure & Equipment foundation, cable trench Watchmen Cabin, Asphalt Road and ancillary civil works at 220KV Rahiyad (Suva) s/s at Dahej Ta.Wagra Dist. Bharuch under Bharuch TR Circle.(Turnkey Work) SR No DESCRIPTION Qty Unit 1 Excavation for foundation up to 1.5m depth including soring out

and stacking of useful materials and disposing of the excavated stuff upto any lead (A) dence or hard soil soil.

16660.00 Cmt

2 Excavation for foundation for depth from 1.5M to 3.0M including soring out and stacking of useful materials and disposing of the excavated stuff upto any lead (A)Dence or hard soil.

3485.00 Cmt

3 Excavation for foundation for depth from 3.0M to 5.0M including soring out and stacking of useful materials and disposing of the excavated stuff upto any lead.(A) Dence or hard soil.

20.00 Cmt

4 Filling in trenches with sand including watering ramming consolidation and dressing etc complete as directed by EIC.

2844.00 Cmt.

5 Supplying & stacking 150 to200 mm size hard stonerubble black including transportation filling the box etc. complete. (box measurement shall be paid with 25% void deduction)- For road work.

1380.00 Cmt.

6 Filling in plinth / trenches with yellow earth/ murrum of approved quality brought from outside in layers not exceeding 200mm thick layers including watering, ramming, consolidating etc., complete as directed by EIC.

3382.00 Cmt

7 Providing and laying cement concrete 1:4:8 (1 Cement : 4Course sand : 8 black crushed stone aggregate 40mm nominal size ) and curing complete- Foundation and plinth.

3722.00 Cmt

8 Providing and laying cement concrete work of 1:2:4 (1- Cement :2-Sand :4 C.Agg of 20mm size) and curing complete excluding the cost of formwork and reinforcement in Foundations, footing and base of columns and mass concrete

1264.00 Cmt

9 Providing & laying control cement concrete M-20 as per mix design exposed work with curing etc. complete including the cost of ply wood / steel sheathing form work & adjustable tubular steel supports / Props.but excluding the cost of reinforcement. For Foundation and footings (Min Cement Content is 320Kg/Cmt)

2933.00 Cmt

10 M20 as above but for column . 212.00 Cmt 11 M20 as above but for paradi 620.00 Cmt 12 M20 as above but for beam. 4.00 Cmt 13 M20 as above but for slab, chhajah, lintel 13.00 Cmt


Providing & laying control cement concrete M-25 as per mix design exposed work with curing etc. complete including the cost of ply wood / steel sheathing form work & adjustable tubular steel supports / Props.but excluding the cost of reinforcement. With minimum cement content shall be 320kg per cmt.

14 M25 as above but for Footing 392.00 Cmt 15 M25 as above but for column. 33.00 Cmt 16 M25 as above but for beam. 95.00 Cmt 17 M25 as above but for paradi 5.00 Cmt 18 M25 as above but for slab, chhajah, lintel 90.00 Cmt 19 Providing TMT bar (Thermo mechanically tested) for RCC work

including bending, binding and placing in position etc. completed for RCC work.

289.80 MT

20 Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg/Sqm in cement mortar 1:6 (1 cement : 6 fine sand) for foundation and plinth. Conventional bricks.

403.00 Cmt

21 DO but FOR SUPER STRUCTURE G.F+F.F+Stair Cabin. 161.00 Cmt 22 Half brick masonry in common burnt clay building having

crushing strength not less than 35 Kg/cm in cement mortar 1:4 (1 cement : 4 coarse sand) in super srructure up to floor two level.

35.00 Smt

23 Providing 15mm thick cement plaster single coat on masonary/bela/concrete wall/ceiling for plastering up to any floor level finished even and smooth in cement mortar 1:3 (1 Cement: 3 sand) finished with floating a coat of neat cement slurry.

3760.00 Smt

24 Providing 20mm thick sand face cement plaster on wall up to height 10 meters above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1 cement: 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1 cement: 1 sand) etc complete.

705.00 Smt

25 Providing cement vata (10cm x10cm size) quarter round in cement mortar 1:1 including neat cement finishing, watering, etc complete.

85.00 Rmt

26 Providing white washing with lime on wall surfaces (three coats) to give and even shade including thoroughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter.

220.00 Smt

27 Providing distempering (three coats) with oil bound distemper of approved brand and manufacture and of required shade on undercoated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth.

1650.00 Smt

28 Providing and applying 3 coats of ACID/ALKALI resisting paint of approved shade and make to wall, ceiling including filling putty smoothening the surfaces scaffolding, etc complete as directed by EIC

160.00 Smt


29 Providing & applying 3 coats of APOCOLITE APEX or its equiv. ACRYLIC EXTERIOR paint on existing plastered surface of approved make & shade including one coat of cement promer finishing & thinning as per manufacturer’s instruction. A gap of 6 hrs. Should be given between 2 subsequent coats. The work should be carried out strictly as per manufacturer's specification and requirement comp. as directed by EIC.

760.00 Smt

30 Providing and laying approved quality polished Kotah stone slab (25mm th.) flooring including using 35x25mm approved quality machine cut, marble strip over 20mm (average) thick base of cement mortar 1:6 (1 cement : 6 course sand or L.M. 1:1.5 laid over and jointed with grey cement slurry including rubbing and mirror polishing using polishing machine with grinding six emery's of different no. including using special chemical powder for polishing including white cement coating two times during polishing for filling up minute holes or cracks in joints etc complete.

300.00 Smt

31 Providing and laying polished Kota stone slab 25 mm th. in risers of steps, Dado and sills laid on 10 mm thick CM 1:3 & jointed with grey cement slurry including rubbing and polishing etc. complete.

52.00 Smt

32 Providing and laying color glazed tiles-JOHNSON/KAJARIA/NITTCO or its equivalent make 6mm thick in flooring & dado laid on bed of 12mm thick cement mortar 1:3 (1 cement: 3 course sand) & fixing the same in cement & providing 12mm thick back coating of cement plaster in CM 1:3 for base, filling the joints with white/color cement neatly finishing the joints curing etc. complete.

120.00 Smt

33 Providing & fixing approved quality ceramic tiles (8mm thick) of best quality matt/glossy finish of Johnson/Kajaria/Nittco or its equivalent make of required size for flooring, skirting etc. including fixing the same in cement mortar (1:2) setting with ready made tile adhesive as recommended by manufacturer's including fillings of joints mixed with pigmented cement slurry of matching shade etc. complete - For battery room.

121.00 Smt

34 Providing and laying 24"x24" Vitrified 8mm thick tile flooring over 20mm (avg) base of cement mortar 1:6 (1-Cement:6 Sand) on new surface or fixing on existing surface by adhesive material including jointed with colour cement slurry including finished with flush pointing and cleaning the surface etc complete for antiskid.

50.00 Smt

35 Providing & placing 60MM thick grey colour PAVER PRECAST CONCRETE BLOCK of approved quality size & shape in line & level including fitting in 50MM AVERAGE THICK LAYER of approved quality of RIVER SAND below CONCRETE BLOCK in slope filling the joint of concrete.

2170.00 Smt


36 Providing & laying water proofing treatment on terrace including applying neat cement slurry 2.75 kg./sq.mt. on cement admixed with water proofing component after cleaning the surface, Laying cement concrete with brick bat 75mm to 100mm thick with 50% of C.M. 1:5 admixed with water proofing component over 20mm thick layer of C.M. 1:5 to required slope including ramming at junction of wall and slab, after two days of proper curing applying a second coat of cement slurry, finished the surface with 20mm thick C.M. 1:4 china mosaic flooring and finally finishing flooding 75mm deep with water on terrace for a period of two week. The contractor shall submit performance guarantee of the waterproofing item at the rate of 20% of cost of item of work order in the form of FDR of Schedule Bank / Nationalised Bank in favour of GETCO (A/c Agency) for a period of 5 years from actual date of completion of work stamp paper of appropriate value in approved format of GETCO.

613.00 Smt

37 Providing & fixing approved quality FRP door having FRP frame of size 100x50mm & 28mm thick FRP shutter with Depressed Panel shutter having extra reinforcement on side and edges and in Gel coat finish. The core of the shutter is to be filled up with injected fiber extinguishing grade polyurethane foam done in situ along with embedded wooden pieces for stiffening and also for fixing hinges and fixtures. The whole FRP frame and shutter is to be water proof, weather proof, termite proof and resistance to mild acid/Alkali resistance including SS hinges with necessary screws and aluminum fixture and fastenings etc complete. 28mm th. shutter & 100x50mm frame.

10.00 Smt


38 Providing and fixing fully glazed / partly glazed double leaf 20 micron thick colour anodized aluminium door with following listed extruded section manufactured by Jindal Aluminium Ltd. & other accessories, the Alluminium sections are of HE9WP Group: 1) with door outer frame section of 63.5 x 38.1 x 3.18 mm thick weighing 1.777 kg/rmt (J4605) 2) Door shutter vertical style (meeting style) of 53.7 x 44.45 x 2.30mm thickness (J4537) weighing 1.238 Kg/m 3) Hinge side 53.7 x 44.45 x 2.30mm thickness (J4540) weighing 1.173 Kg/Rmt 4) Bottom rail of size 150 x 44.45 x 2.40mm thickness (J4538) weighing 2.376 Kg/Rmt 5) Lock rail of size 83.5 x 44.45 x 2.40mm thickness (J4549) weighing 1.679 Kg/Rmt 6) Top rail of size 47.62 x 44.45 x 3.18mm thickness(J4506) weighing 1.501 Kg/Rmt 7) Ventilator middle member (if required) 49.91 x 44.45 x 3.00mm thickness (J4621) weighing 1.495 Kg/ Rmt 8) Aluminium handle 127.00 x 37 x 3.65mm thickness (J4483) weighing 1.912 Kg/No. 9) Tower bolt 250mm long (J4954) 10) Aluminium bending mortice lock (J4420) 11) Top panel using 6.0mm thick Triveni or Modi or Saint Gobain make float glass fixed with PVC Clear gasket 12) Bottom panel using 12mm thick exterior grade prelaminated particle board of make approved by the Engineer - in - Charge (for partly glazed door) fixed with virgin PVC clear gasket 13) Door Closer of make approved by the Engineer - in - Charge with all other required fixtures and fastening of colour anodized with aluminium beading, with all labours and materials etc. complete as directed by EIC. Aluminium section user for fixing hinges, door closer, etc. shall be filled with country teak wood to receive screws.GETCO SOR Section-G Item-14

38.00 Smt


39 Providing and fixing aluminium 20 micron thick colour anodised (conforming to IS 1868 - 1968) composite windows with fixed & sliding panes or louvered ventilators using following listed aluminium sections manufactured by M/s Jindal Al. Ltd. & other accessories and as per drawing, the Alluminium sections are of HE9WP Group: 1) Main frame size 63.5 x 38.1 x 1.65mm thk (unit wt. 0.942 Kg/m)2) Middle vertical/ Horizontal member of frame 63.5 x 38.1 x 1.53mm thk (unit wt. of 0.942 Kg/m)3) Cleat for fixing of glass 19 x 17.3 x 0.90mm thk (Unit Wt. 0.124 Kg/m)4) 6mm thk float glass (Modi/Saint Gobain make) fixed using virgin PVC clear gasket)5) Main frame 61.85 x 31.75 x 1.50mm thk (Unit Wt. 0.784 Kg/m) with guide Channel.6) Shutter frame 40 x 18 x 1.55mm thk (Unit Wt. 0.547 Kg/m)7) Woolen weather strip (threaded)8) Teflon wheel nylon body one piece runner with NHK, Japan bearings 696 / 6259) Handle & locking arrangement as approved by the Engineer - in - Charge.including applying silicone sealant on surfaces in contact with masonry inside as well outside. Note : All joints shall be mechanically joined using specially designed Zinc plated MS plates.

55.00 Smt

40 Providing and fixing approved quality aluminum ventilator having frame size 55x35mm having thickness 3mm & weighing 1.36kg/rmt approx standard aluminum extruded anodized frame having panel of 5mm thick white/brown glass fixed horizontal louvers in aluminum channel as per details drawings.

2.00 Smt

41 Providing and fixing approved quality rolling shutters of of 18 guage approved make made of 80mm wide M.S. Laths interlocked together through their entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracket plates guide channels and arrangements for inside locking with push pull operation complete including the cost of hood cover & spring&oil painting etc. comp. (A) Shutter having width below 3.5 meter.

5.00 Smt

Providing and fixing approved quality to wall, ceiling, floor & trenches UPVC pipe of Dutron/Astral or its equivalent ISI make and wall thickness of the following nominal bore tube fitting and clamps of GI sheet at every one Metre Distance including making good the wall, ceiling, floor & refilling trenches.

42 15 mm OD pipe 180.00 Rmt 43 25mm OD pipe 610.00 Rmt 44 40mm OD pipe 200.00 Rmt 45 50mmpipe OD pipe 320.00 Rmt Providing & fixing approved quality gun metal check or non-

return wheel valve (ISI Make)

46 15mm dia. 2.00 No


47 25mm dia. 7.00 No 48 40mm dia. 2.00 No 49 50mm dia 1.00 No 50 Providing and fixing approved quality screw down bib tapes of

following size: (A ) Brass screw down bib tap polished bright (A) 15mm dia.

5.00 No

51 Providing & fixing approved quality readymade P.V.C. water tight storage tank of 1000 liters capacity made from linear low density polythene & low density polythene LDPF product confirming to I.S. : 10146-1982 with cover including providing & fixing one 20mm dia, float valve ball-cock, one 20mm dia G.I. over flow pipe of length up to 0.30 Mt. including making all connection for inlet/outlet etc. complete as directed by E.I.C

3.00 No

52 Providing and fixing approved quality .C.I. Nahani trap of approved size & make with additional aluminum perforated jali cover & C.I. Pipe outside the wall with plug, bend, etc. complete as directed by E.I.C. (b) 100MM DIA

6.00 No

53 Providing and fixing approved quality S.W. gully trap with C.I. Grating, brick masonry chamber and water tight C.I. cover with frame of 300 mm x 300 mm size (inside) with standard weight. (B) 150 mm x 100mm size P or R type.

5.00 No

54 Providing B.B. Masonry inspection chamber (MANHOLE) of 600mm x 600 mm size including light type approved C.I. Cover with frame, necessary excavation, bottom concreting of B.B.C.C. (1:4:8) 150mm thick/225mm, thick B.B. Masonry in C.M. (1:6) 12mm thick cement plaster in C.M. (1:3) inside & to all exposed faces up to 300mm below ground level, curing etc. including disposal of surplus excavated earth up to radius of 500mt. including 3 coats of white or colour wash to all exposed finished surface etc. complete as directed by EIC. (B.B. Masonry up to 1000mm depth).

17.00 No

55 Providing & fixing FINOLEX brand or equivalent approved quality rigid P.V.C. pipe for rain water including necessary fittings like bends, shoe, cowl etc. & fixing the pipes to the wall in plumb by means of G.I. Clamps of 18 gauge sheet at 1 to 1.5 meter distance, filling the joints with approved solution complete as directed by E.I.C.(A) 110 MM DIA O.D.P.V.C. pipe 2.5kg/cm2.

74.00 Rmt

56 Providing and fixing approved quality ORISSA PAN water closet squatting pan size 580mm including providing and fixing 100mm size P or S trap jointing tap with the pan and soil waste pipe and with G.I. inlet connection for flush pipe with W.C. pan and chromium plated brass half turn flush cock of approved quality of 25mm dia etc. complete.

3.00 No


57 Providing and fixing approved quality wash basin of size 550x440mm with single hold pillar tap with C.I. or M.S. brackets painted white / colour including cutting holes and making good the hole including pillar tap, stop cock, PVC connection and PVC waste pipe to be concealed with bottle trap.

3.00 No

58 Providing and fixing urinal of approved quality including connection with trap and with integral longitudinal flush pipe concealed outlet (A) squaring plate pattern white earthenware 550mm x 300mm.

2.00 No

59 Providing and fixing approved quality 600mm x 450mm beveled edge mirror of superior glass mounted on PVC moulded frame and fixed to wooden plugs with C.P. brass screws and washers.

3.00 No

60 Providing and fixing approved quality C.P. Brass towel rod complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws. 600mmx20mm size.

3.00 No

61 Providing & fixing approved quality 300x300mm size marble year plate with black border all round & letters including fixing the same in cement mortar etc. comp. As directed by EIC.

1.00 No

62 Providing & applying anti termite treatment, as per IS 6313 (Part.II & II 2001) for building works in pre construction & post const. stages, using chemicals conforming to relevant IS in water emulsion and effective when applied uniformly over the area to be treated. The chemical to be used is chlorophriphos 20% EC or its equivalent. The treatment is to be carried out as per the procedure mentioned below and treated plinth surface area is to be taken for measurement. (with performance guarantee for 5 years)a)For pre construction treatment: For plinth filling & periphery holes in side plinth to be drilled 300MM C/C each having depth 1.5M and for inside plinth the hole are to be treated with diluted chemical solution, 1.5 lit. per hole, in the ratio of 1:20. For periphery i.e. out side plinth the ditch is to be treated with diluted solution 2.25 litre per rmt. In the ratio 1:20. The entire surface area is to be treated with diluted solution of dose 2.5 litres per smt. over and above as a plinth surface treatment.

570.00 Smt

63 Providing & fixing Acrylic name plates of required size including painting letters as directed & fixing as directed by E.I.C.

8.00 No

Providing and laying (to level or slopes) and jointing with stiff mixture of cement mortar in proportion 1:1 approved quality salt glazed stoneware pipes following nominal internal diameters including testing of pipes and joints complete.

64 Do as above but 100mm dia 65.00 Rmt 65 Do as above but 150mm dia 135.00 Rmt


66 Providing and fixing false ceiling with Pre-Coated G.I. Angle, leveled at the required position above the finished ceiling line and fixed to thewall at 600mm centers. Pre-Coated main 'T' is suspended from the fastener at 1200mm centers apart with the help of fastener, rawl plug and ceiling angle. Pre-Coated cross 'T' section snap fixed at the main 'T' at 600 mm to form 600mm X 600mm grid respectively. GYPTECH VINYL LAMINATED GYPSUM Panels size 595 X 595x9 mm are laid in to the grid to be placed in position onto the panels. Main Tee - 32X23X3600X0.3mmCross Tee - 26X23X1200X0.3mmCross Tee - 26X23X600X0.3mmWall Angle - 21X21X3000X0.4mm

200.00 Smt

67 Providing and fabricating and erecting M.S.angle posts, racks & trays, covers for cable trench using structural steel angels, sheets and flats etc. of approved steel manufacturer as per drawing & design including fixing the angles /racks with the help of the galvanised ISI fasteners of approved manufacturere with the RCC etc.including three coats of oil painting etc. completed as directed by EIC.(All materials required for the work to be brought by the contractor).

16200.00 Kg

68 Providing and Fixing 20 micron colour Anodised Partly panneled & partly Glazed Alu.Partition using alu. Section JINDAL/Hindalco/Banco aluminium Ltd. as per design out of extruted tubuler hollow section approx size of partition frame double groove (63.50x38.1x3.20 ,1.95 kg/rmt), partition frame single groove ( 63.50x38.1x2.50 ,1.092 kg/rmt), glazing clip (19x17.3x.1.2 ,154 kg/rmt), glazing strip/plate (44.45x5.72x3.22, 0.453 kg/rmt) including fixing upper part of partition with 5 mm thk. plain/brown float glass or froasted glass as per design & of approved quality (like modi gaurd/saint gobain) & lower part of the partiton with 8 mm waterproof ply fixing with laminate sheet both side of approved brand & colour (greenply/royal touch/marino/century) with alu. glazing cleat and rubber sealing/glass wool including necessary fittings like screws, angles, cleat etc and filling with appropriete silicon sealent between aluminium section members & wall/ceiling or any surface gap between Wall & section etc. complete as per detail drawing and instruction of EIC.

40.00 Smt

69 Labour charges for making molding edge to to marble/Kotah stone including all tools tackles, materials and labour etc. complete as directed.

50.00 Rmt

70 Providing and fixing cats iron spigot and socket soil, waste and ventilating pipes of 100mm dia.

5.00 Rmt

71 Providing and fixing 75mm dia CI Cowl ventilator of light type. (pwd/ch.23/it6)

4.00 No


72 Providing & Fixing SIGN BOARD of acrylic sheet computerized vinyl diagram in GI box with tube light size 1800 x 1200 mm for SUB-STATION as directed by E.I.C.

1.00 No

73 Providing & placing 50mm thick & 300mm wide prestressed concrete cover (for clear span of up to 1.2 meter in proportion (1:1:5:3) or M-20 necessary reinforcement or 4mm dia HT steel wire-4 Nos. bars and 4mm dia. distribution bars at 150 mm C/C as per drawing & design including providing necessary M.S. bar hooks for lifting arrangement & vibrating with vibrators. Finishing all the surfaces, curing by placing in water pond for ten days etc. complete as directed by E.I.C. ( The rate includes cost of all material required, labour charges, transportation, loading, unloading etc.

2220.00 Smt

74 Providing & fixing approved quality light type C.I. Manhole covers with water tight C.I. Frame & fixing the same in concrete etc. complete as directed by E.I.C. (A) 600mm x 600mm.

4.00 No

75 Setting of template & foundation bolts in line and level before concreting of foundation and making arrangement of fixing template in such a way as it remains in position during concrete etc. comp. As directed by EIC. Rate includes supplying and fabricating of template from Mild steel as per template drawing including all material, tools tackles & labours required for that. No Extra payment for preparation of template will be given the template such prepared will be the porperty of agency.

600.00 No

76 Providing and fixing to foundations and cable trenches wall 60 grade 50mm dia HDPE 10 kg/cm2 pipe for the cable in line and level as shown in the drawing and as directed by EIC. this work includes cutting the core in to the RCC work by means of core cutter as per the requirement of the cables and directed by the EIC.

100.00 Rmt

77 Providing and fixing to foundations and cable trenches wall 60 grade 110mm dia HDPE 10 kg/cm2 pipe for the cable in line and level as shown in the drawing and as directed by EIC. this work includes cutting the core in to the RCC work by means of core cutter as per the requirement of the cables and directed by the EIC.100mm dia.

100.00 Rmt

78 Supply, fabrication,cutting,threading of M.S rod including hot dip galvanizing the same of required size and length including 2 Nos of nuts and pack/spring washers etc; complete as directed by E.I.C

10000.00 Kg

79 Supplying & stacking& spreading quary dust including transportation for spreading on road /yard filling the box etc. complete.Before spreading quarry dust doing micro leveling including requiredcutting,filling,leveling the earth up to 150 to 200mm depth as directed by E.I.C.

1200.00 Cmt


80 Supplying & stacking 25 to 40mm size crushed metal including transportation, filing the box etc. and spreading in S/S yard complete as directed by EIC. (Box measurement will be paid with 15% voids deductions) Including spreading same in yard in layers. For Yard Metal.

1900.00 Cmt

81 Supplying & stacking 40 to 60mm size hard stone road black crushed metal including transportation filling the box etc. complete. (box measurement shall be paid with 20% void deduction)- For road work.

1600.00 Cmt

82 Supplying & stacking murrum of approved quality including transportation, filling the boxes etc. completed as directed. (Box measurement will be paid with 15% deduction of voids).

350.00 Cmt

83 Labour charges for spreading150 to 200 mm rubble in 250mm thick layers with required grade & camber & watering rolling the each layer with 8 to 10 tones power roller including filling the voids with required quarry dust depression which occur during process etc. complete as directed by E.I.C.

5250.00 Smt

84 L/C for spreading 25-40mm metal in 100mm layer for yard only. 19000.00 Smt 85 Labour charges for spreading 40 to 60 mm size metal in 100mm

thick layers with required grade & camber & watering rolling the each layer with 8 to 10 tones power roller including filling depression which occur during process etc. complete as directed by E.I.C.

16000.00 Smt

86 DO as above (item No 80) but with murrum. 16000.00 Smt 87 Cleaning the existing surface,brooming & Providing laying &

rolling 50mm thick open graded premix bituminious (60/70 grade)carpet with B.T.aggregate as specified & using bitumen for tack coat at the rate of 5kg/10smt & using bitumen for mixing with agreegate at the rate of 3.36% i.e.33.60kg/MT of total mix including heating & mixing in drum mix plant ,spreading same with paver finisher & consolidation with vibratory roller including necessary firewood,oil,lubricant,labour charges etc.,using contractor’s own drum mix plant & equipment,tools etc complete in accordance with the requirement of the specification.

270.00 MT

88 Providing laying 20mm thick seal coat with B.T.aggregate as specified using aggregate at the rate of 0.18 Cum/10smt & bitumen(60/70 grade)for mixing with aggregate at the rate of 4.5% i.e.45kg/MT of total mix including heating & mixing in drum mix plant ,spreading the same with paver finishe & consolidation with vibratory roller 80to 100KN static weight including necessary fire wood .oil,lubricant,labour charges,using contractor’s own drum mix plant,machinaries ,equipments & tools etc complete ,in accordance with the requirement of specification.

125.00 MT


89 Providing & Applying hot bitumen as per specification as a liquid seal coat at the rate of 10 Kg. per 10 m2 area including cleaning surface and applying hot bitumen uniformly with brush and spreading sand at the rate of 0.1 m3 per 10 m2 area rolling with 8 to 10 tonnes power roller etc., complete as directed by E.I.C.

5250.00 Smt

90 Supplying & fixing approved quality reinforced concrete heavy duty non pressure pipes with collars for culverts carrying heavy traffic as per IS-458-1971 standard specification including setting the pipes in C.M. 1:2 watering and laying (to level or slope) of class NP3 of 300mm dia.

1015.00 Rmt

91 Supplying & fixing approved quality reinforced concrete heavy duty non pressure pipes with collars for culverts carrying heavy traffic as per IS-458-1971 standard specification including setting the pipes in C.M. 1:2 watering and laying (to level or slope) of class NP3 of 600mm dia.

30.00 Rmt

92 Providing & laying approved quality(Two level or slopes) & jointing reinforced concrete light duty non presuure pipe I.S. ClassNP-2 pipe necessaru collars & but ends prepaed for collar joint including necessary excavation, refilling the trenches, laying 150mm.thick B.B.C.C.(1:4:8) below joints up to half the height of joints making water tight joints in C.M.(1:1) curing etc., complete as directed by E.I.C.150mm.dia. Pipe.

45.00 Rmt

93 Demolition including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift. (I) RCC Work.

15.00 Cmt

94 Painting the letter with best enamel oil paint in 200 to 250mm size etc. complete as directed by EIC (paint should be brought by the contractor)

200.00 No

95 Providing supplying fabricating and erecting chain link fencing panel of size 2400x2000mm made from 75x75mm & 10 gauge GI chain link & 50x50x6mm GI angle including fixing and chain link in angle frame by means of 40x3 mm GI flat welded to angle frame. Drilling of holes in angle frame and flat, fixing the same with GI angle post in line, level and plumb by means of 10 mm dia GI bolts and GI nuts in frame and flat with hot deep galvanizing as per IS-2633/72 & 209 of 1966 or latest amendment, etc complete as per drawing as directed by EIC. (All this materials like MS flat, chain link fencing, MS angles, bolts, nuts will have to be supplied by the contractor)

600.00 Kg

96 Boring holes 4.50 M. deep in ordinary soil/Densr or hard soil (for cast in situ piles) and disposal of the surplus excavated soil as directed within a lead of 50 M. for following diameter of piles.500 mm Dia.

200.00 No

97 Boring holes 4.50 M. deep in ordinary soil/Densr or hard soil (for cast in situ piles) and disposal of the surplus excavated soil as directed within a lead of 50 M. for following diameter of piles.400 mm Dia

100.00 No


98 Boring holes 10.00 M. deep in ordinary soil/Densr or hard soil (for cast in situ piles) and disposal of the surplus excavated soil as directed within a lead of 50 M. for following diameter of piles.400 mm Dia

49.00 No

99 Extra for under reaming inside the bore holes for under reamed piles of 500 mm diameter

200.00 No

100 Extra for under reaming inside the bore holes for under reamed piles of 400 mm diameter

198.00 No

101 Earth work for road incluiding breaking,cutting Stabilisation of excavated earth using 20%sand with 80% excaveted earth,spreading in 200mm layers, palverisation including all leads & lift & including watering rolling & consolidation of sub grade in two layers at O.M.C. to required dry density including filling the depression which occurr during the process using power roller 8 to 10T.removing the surplus earth at any lead.(sand will be paid seperatly.)

520.00 Cmt

102 Providing plantation & development of plants /trees/flowers,ornamental plants, & garden shrubs,small trees of plants of selected & approval name quality,size & growth in good condition.The work includes cost of plants,material,digging pit in the soil of size 0.6x0.6x0.6 mtr soil for planting trees. mixing manure & refiiling pit with good earth ,watering as & where required. Providing pesticides/fertilizer for maintenance,replacement & replacing of dead plant during maintanence.cleaning,removing,labour,tools & tackles transportation,loading & un loading etc.complete as directed by E.I.C.

200.00 No

103 Providing & fixing sliding gate of 40 mm dia mild steel pipe B class all round and 20 mm dia Mild steel pipe at 200 mm C/C and 12mm Mild steel square bars at 200 mm C/C alternatively (i.e.One between two pipes) vertically welded to 40 mm dia pipe frame as per drawing and design with necessary brackets,hold fasts,locking arrangement on top & aldrop on both the side including base rail for sliding the gate having ball bearing rollers & guide tracks of 50x6mm M.S. flat with hold fast, fabrication of side supports including fixing GETCO letter on front side etc.comp.With three coats of approved oil painting & one coat of red oxide primer as directed by EIC (The cost does not include the cost of reinforcement, column, support,joints, concrete masonry work.

15.00 Smt

GUJARAT ENERGY TRANSMISSION CORPORATION LIMITED … · 9 HDB Isolator without ES 630A 25kA 3s with...

Documents

Transcript of GUJARAT ENERGY TRANSMISSION CORPORATION LIMITED … · 9 HDB Isolator without ES 630A 25kA 3s with...