guia 10 NCh1989-90.pdf
-
Upload
patricia-jones -
Category
Documents
-
view
93 -
download
0
Transcript of guia 10 NCh1989-90.pdf
![Page 1: guia 10 NCh1989-90.pdf](https://reader036.fdocuments.net/reader036/viewer/2022073120/55cf9b8a550346d033a67837/html5/thumbnails/1.jpg)
DEPTO. INGENIERIA Y GESTION DE LA CONSTRUCCION ICC 2454 DISEÑO Y CONSTRUCCION EN MADERA PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE Profesor : Mario Wagner M.
METODOLOGIA OPERATIVA NORMA NCh 1989. A. Criterio de Agrupación de Especies Madereras
con propiedades mecánicas conocidas.
Propiedad Contenido Grupo y valor mínimo, en MPa, para la media de Humedad de las propiedades que se indican % E1 E2 E3 E4 E5 E6 E7 _____________________________________________________ MRf ≥ 30 86 73 62 52 43 36 30 12 130 110 94 78 65 55 45 _____________________________________________________ Ef ≥ 30 16.300 13.100 10.500 8.100 5.900 4.300 2.800 12 19.860 16.160 13.200 10.250 7.850 6.000 4.150 _____________________________________________________ Rcp ≥ 30 40 34 29 24 20 17 14 12 77 65 55 46 38 32 26
B. Criterio de Agrupación de Especies Madereras sin propiedades mecánicas conocidas.
Propiedad Contenido Grupo y valor mínimo, en kg/m3, para la densidad de Humedad obtenida con masa y volumen correspondientes madera a un contenido de humedad de 12%. _______________________________________________________ % E1 E2 E3 E4 E5 E6 E7 _______________________________________________________ Densidad ≥ 30 1.320 1.040 820 630 480 370 280 Aparente 12 1.170 940 770 610 480 390 300
C. Relaciones consideradas: MRf = 18,21 + 0,00417 Ef H ≥ 30% r = 0,70 MRf = 22,517 + 0,005412 Ef H = 12% r = 0,79 Rcp = 0,4645 Rf H ≥ 30% Rcp = 0,5886 Rf H = 12% MRf = 0,632 D120,6838 H ≥ 30% r = 0,60 MRf = 0,519 D120,7821 H = 12% r = 0,60
![Page 2: guia 10 NCh1989-90.pdf](https://reader036.fdocuments.net/reader036/viewer/2022073120/55cf9b8a550346d033a67837/html5/thumbnails/2.jpg)
DEPTO. INGENIERIA Y GESTION DE LA CONSTRUCCION ICC 2454 DISEÑO Y CONSTRUCCION EN MADERA PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE Profesor : Mario Wagner M.
D. Criterio de clasificación. Cuando las propiedades que rigen el procedimiento originan grupos diferentes, se mejorará en un grupo la asignación correspondiente a la calificación mas débil, con la excepción del caso en que la peor calificación la comparten simultáneamente el módulo de rotura medio y el módulo de elasticidad medio en flexión, donde la asignación será la correspondiente a estas últimas propiedades. E. Agrupación resultante.
Contenido de Humedad de la madera H ≥ 30% H = 12% ______________________________________________________ Grupo Especie Grupo Especie ______________________________________________________ E2 Eucalipto ES2 Eucalipto ------------------------------------------------------------------------------------------------------------- E3 Ulmo ES3 Lingue ------------------------------------------------------------------------------------------------------------- E4 Coihue, ES4 Araucaria, Coihue(Chiloé), Coihue, Coihue(Magallanes), Coihue (Chiloé) Raulí, Tineo, Roble, Roble, Roble (maule) Roble (Maule) Araucaria Ulmo Mañío Hojas Largas, Laurel, Lenga ------------------------------------------------------------------------------------------------------------- E5 Pino Oregón, ES5 Alerce, Canelo (Chiloé), Canelo (Chiloé), Mañío Macho, Mañío Macho, Lingue, Tepa, Lenga, Raulí, Ciprés Cordillera, Ciprés Cordillera, Olivillo, Coihue (Magallanes), Tepa, Olivillo, Alerce, Pino Oregón Ciprés Guaitecas, Laurel ------------------------------------------------------------------------------------------------------------- E6 Alamo ES6 Alamo, Ciprés Guaitecas, Mañío Hembra
![Page 3: guia 10 NCh1989-90.pdf](https://reader036.fdocuments.net/reader036/viewer/2022073120/55cf9b8a550346d033a67837/html5/thumbnails/3.jpg)
DEPTO. INGENIERIA Y GESTION DE LA CONSTRUCCION ICC 2454 DISEÑO Y CONSTRUCCION EN MADERA PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE Profesor : Mario Wagner M.
METODOLOGIA OPERATIVA NORMA NCh 1990. F. Propiedades Admisibles para la madera estructural [MPa].
Clase Estructural
Tensiones Admisibles Módulo de Elasticidad
Ff Fcp Ftp Fciz Ef
F34 34,5 26,0 20,7 2,45 18.150
F27 27,5 20,5 16,5 2,05 15.000
F22 22,0 16,5 13,2 1,70 12.600
F17 17,0 13,0 10,2 1,45 10.600
F14 14,0 10,5 8,4 1,25 9.100
F11 11,0 8,3 6,6 1,05 7.900
F8 8,6 6,6 5,2 0,86 6.900
F7 6,9 5,2 4,1 0,72 6.100
F5 5,5 4,1 3,3 0,62 5.500
F4 4,3 3,3 2,6 0,52 5.000
F3 3,4 2,6 2,0 0,43 4.600
F2 2,8 2,1 1,7 0,36 4.350 G. Tensión Admisible Fcn [MPa].
Contenido de Humedad H ≥ 30 % H = 12 % Fcn
ES1 9,0 ES2 7,4 ES3 6,1
E1 ES4 5,0 E2 ES5 4,1 E3 ES6 3,4 E4 ES7 2,8 E5 2,3 E6 1,9 E7 1,6
![Page 4: guia 10 NCh1989-90.pdf](https://reader036.fdocuments.net/reader036/viewer/2022073120/55cf9b8a550346d033a67837/html5/thumbnails/4.jpg)
DEPTO. INGENIERIA Y GESTION DE LA CONSTRUCCION ICC 2454 DISEÑO Y CONSTRUCCION EN MADERA PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE Profesor : Mario Wagner M.
H. INTERRELACION ENTRE AGRUPAMIENTO DE ESPECIES [Ei,ESi], CLASE ESTRUCTURAL [F X], GRADO ESTRUCTURAL Y CONTENIDO
DE HUMEDAD [H] DE LA MADERA.
Clasificación Visual
H [%] Agrupamiento de Especies según NCh
1989
≥ 30 E2 E3 E4 E5 E6
12 ES2 ES3 ES4 ES5 ES6
Grado Estructu
ral RR Clase Estructural
Nº1 0,75 ≥30 F22 F17 F14 F11 F8
12 F34 F27 F22 F17 F14
Nº2 0,60 ≥30 F17 F14 F11 F8 F7
12 F27 F22 F17 F14 F11
Nº3 0,48 ≥30 F14 F11 F8 F7 F5
12 F22 F17 F14 F11 F8
Nº4 0,38 ≥30 F11 F8 F7 F5 F4
12 F17 F14 F11 F8 F7