GT-P02W-XX · OperatingTemperature Top °C -40 +60 StorageTemperature Tst °C -40 +85 TestingPoint...
Transcript of GT-P02W-XX · OperatingTemperature Top °C -40 +60 StorageTemperature Tst °C -40 +85 TestingPoint...
c
Application
Features
GT-P02W-XX
Product Description· high luminous efficacy 180lm/w
· red copper base with high heat
conductivity
· LM-80; RoHS
· > 50000Hrs
· great CCT unity
· reflow soldering available
· outdoor architectural lighting
· street light,spot light,wall washer
· commercial lighting
· general illumination
· decorative lighting
· indication lighting
· stage lighting
· traffic signal lighting
Characteristics................................................2Coding Rules...................................................2
Specifications..................................................3
Specifications..................................................4
Specifications..................................................5
Specifications..................................................6
Specifications..................................................7
Spectral Features ...........................................8
Spectral Features ...........................................9
Typical Spatial Distribution............................10
Mechanical Dimension..................................10
Reflow Soldering Features ............................11
White Binning Information............................12
Reliability Tests .............................................13
Packaging ......................................................14
Notes .............................................................15
Table of Content
Getian GT-P02W white high power led
series (LM-80 approved in 2013) is
designed for outdoor high power lighting
with ultimate cost performance. Unique
and perfect raw materials combination of
Getian and strict reliability tests (eg:
temperature shock test; high temperature
aging test etc) ensures its stability and
excellent performance in heat conduction,
CCT unity, light quality and super high
light output. It’s been widely applied to
street lights, spot light, wall washer, etc.
GT-P02W-XX
Add: Bldg 55, Baotian 3rd road, xixiang, BaoanDistrict , Shenzhen China, 518102
Tel: +86-755-29177598Web: www.getiangroup.comE-mail: [email protected]
Shenzhen Getian Opto-electronics Co., Ltd
Characteristics Unit Min Typical Max
Dimension L*W mm 14.5*8.05
Diameter of Luminous Area Φ mm 5.5
Beam Angle 2θ1/2 deg. 120
CCT k 1800 25000
Luminous Efficacy lm/w 90 160
CRI Ra 55 98
Power Dissipation PD W 1 5
Operating Temperature Top °C -40 +60
Storage Temperature Tst °C -40 +85
Testing Point Tc °C 60
Junction Temperature Tj °C 115
Reverse Current(Vr=5V) Ir uA 10
Thermal Resistance Rj-c °C/W 12
ESD(HBM) V 2000
Reflow Soldering(Lead-Free) ST °C 180
Model GT P 02 W X X X X XX
Code GT P Type Emitting Color Chip Size Chip QTY Beam Angle Power BrightnessGrade
Meaning GetianHighPowerSeries
02:hightemperature
PC lens
W3:2900-3200W4:4000-5000W5:5000-6000W6:6000-7000W9:9000-15000
2: 23*45mil3: 33*33mil4: 45*45mil
1:1EA2:2EA 0:120°/140° 1:1W
3:3W
120:120-130140:140-150150:150-160160:160-170240:240-260250:250-270270:270-290300:300-320
Characteristics
Coding Rules
GT-P02W-XX
Copyright©2015 Gtian Group. All rights reserved.The information in this document is subject to change without notice.
2
ColorCCT(K) CRI
Ra
2.8-3.4V @350mA 3.2-4.0V @750mA
Min Max LM Part Number LM Part Number
WarmWhite 2600 2900
70
110-120 GT-P02W23101110 / /
120-130 GT-P02W23101120 / /
130-140 GT-P02W24101130 220-240 GT-P02W24103220
140-150 GT-P02W24101140 240-260 GT-P02W24103240
150-160 GT-P02W24101150 250-270 GT-P02W24103250
160-170 GT-P02W24101160 270-290 GT-P02W24103270
80
100-110 GT-P02W23101100 / /
110-120 GT-P02W23101110 / /
120-130 GT-P02W24101120 200-220 GT-P02W24103200
130-140 GT-P02W24101130 220-240 GT-P02W24103220
140-150 GT-P02W24101140 240-260 GT-P02W24103240
150-160 GT-P02W24101150 250-270 GT-P02W24103250
90100-110 GT-P02W24101100 170-190 GT-P02W24103170
110-120 GT-P02W24101110 190-205 GT-P02W24103190
3
Specifications ( Tc = 25°C )
GT-P02W-XX
Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice.
3
Notes:Above charts include the most regular specs for GT-P02W series led for reference. Please consult sales representative for specs that are not listed orplease visit www.getiangroup.com.Machine Tolerance ±3% on luminous flux.
ColorCCT(K) CRI
Ra
2.8-3.4V @350mA 3.2-4.0V @750mA
Min Max LM Part Number LM Part Number
WarmWhite 2900 3200
70
110-120 GT-P02W33101110 / /
120-130 GT-P02W33101120 / /
130-140 GT-P02W34101130 220-240 GT-P02W34103220
140-150 GT-P02W34101140 240-260 GT-P02W34103240
150-160 GT-P02W34101150 250-270 GT-P02W34103250
160-170 GT-P02W34101160 270-290 GT-P02W34103270
80
100-110 GT-P02W33101100 / /
110-120 GT-P02W33101110 / /
120-130 GT-P02W34101120 200-220 GT-P02W34103200
130-140 GT-P02W34101130 220-240 GT-P02W34103220
140-150 GT-P02W34101140 240-260 GT-P02W34103240
150-160 GT-P02W34101150 250-270 GT-P02W34103250
90100-110 GT-P02W34101100 170-190 GT-P02W34103170
110-120 GT-P02W34101110 190-205 GT-P02W34103190
4
Specifications ( Tc = 25°C )
GT-P02W-XX
Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice. 4
Notes:Above charts include the most regular specs for GT-P02W series led for reference. Please consult sales representative for specs that are not listed orplease visit www.getiangroup.com.Machine Tolerance ±3% on luminous flux.
ColorCCT(K) CRI
Ra
2.8-3.4V @350mA 3.2-4.0V @750mA
Min Max LM Part Number LM Part Number
Natural White 4000 4500
70
120-130 GT-P02W43101120 / /
130-140 GT-P02W43101120 / /
130-140 GT-P02W44101130 220-240 GT-P02W44103220
140-150 GT-P02W44101140 240-260 GT-P02W44103240
150-160 GT-P02W44101150 250-270 GT-P02W44103250
160-180 GT-P02W44101160 270-300 GT-P02W44103270
80
110-120 GT-P02W43101110 / /
120-130 GT-P02W43101120 / /
130-140 GT-P02W44101130 220-240 GT-P02W44103220
140-150 GT-P02W44101140 240-260 GT-P02W44103240
150-160 GT-P02W44101150 250-270 GT-P02W44103250
160-170 GT-P02W44101160 270-290 GT-P02W44103270
90
100-110 GT-P02W44101100 170-190 GT-P02W44103170
110-120 GT-P02W44101110 190-205 GT-P02W44103190
120-130 GT-P02W44101120 205-220 GT-P02W44103205
Specifications ( Tc = 25°C)
GT-P02W-XX
Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice.Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice. 5
Notes:Above charts include the most regular specs for GT-P02W series led for reference. Please consult sales representative for specs that are not listed orplease visit www.getiangroup.com.Machine Tolerance ±3% on luminous flux.
ColorCCT(K) CRI
Ra
2.8-3.4V @350mA 3.2-4.0V @750mA
Min Max LM Part Number LM Part Number
Pure White 50005500
55006000
70
120-130 GT-P02W53101120 / /
130-140 GT-P02W53101120 / /
130-140 GT-P02W54101130 220-240 GT-P02W54103220
140-150 GT-P02W54101140 240-260 GT-P02W54103240
150-160 GT-P02W54101150 250-270 GT-P02W54103250
160-180 GT-P02W54101160 270-300 GT-P02W54103270
80
110-120 GT-P02W53101110 / /
120-130 GT-P02W53101120 / /
130-140 GT-P02W54101130 220-240 GT-P02W54103220
140-150 GT-P02W54101140 240-260 GT-P02W54103240
150-160 GT-P02W54101150 250-270 GT-P02W54103250
160-170 GT-P02W54101160 270-290 GT-P02W54103270
90
100-110 GT-P02W54101100 170-190 GT-P02W54103170
110-120 GT-P02W54101110 190-205 GT-P02W54103190
120-130 GT-P02W54101120 205-220 GT-P02W54103205
Specifications ( Tc = 25°C )
GT-P02W-XX
Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice. 6
Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice.
Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice.Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice.
Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice.
Notes:Above charts include the most regular specs for GT-P02W series led for reference. Please consult sales representative for specs that are not listed orplease visit www.getiangroup.com.Machine Tolerance ±3% on luminous flux.
ColorCCT(K) CRI
Ra
2.8-3.4V @350mA 3.2-4.0V @750mA
Min Max LM Part Number LM Part Number
Pure White 60006500
65007000
70
120-130 GT-P02W63101120 / /
130-140 GT-P02W63101120 / /
130-140 GT-P02W64101130 220-240 GT-P02W64103220
140-150 GT-P02W64101140 240-260 GT-P02W64103240
150-160 GT-P02W64101150 250-270 GT-P02W64103250
160-180 GT-P02W64101160 270-300 GT-P02W64103270
80
110-120 GT-P02W63101110 / /
120-130 GT-P02W63101120 / /
130-140 GT-P02W64101130 220-240 GT-P02W64103220
140-150 GT-P02W64101140 240-260 GT-P02W64103240
150-160 GT-P02W64101150 250-270 GT-P02W64103250
160-170 GT-P02W64101160 270-290 GT-P02W64103270
90
100-110 GT-P02W64101100 170-190 GT-P02W64103170
110-120 GT-P02W64101110 190-205 GT-P02W64103190
120-130 GT-P02W64101120 205-220 GT-P02W64103205
Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice.
Specifications ( Tc = 25°C )
GT-P02W-XX
7
CRI(Ra) 70Min
5
4000K
5000K
6500K
CRI(Ra) 80Min
3000K
4000K
5000K
Spectral Feature (Tc = 25°C)
GT-P02W-XX
Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice. 8
6
CRI(Ra) 90Min
3000K
Spectral Feature (Tc = 25°C)
Electrical Features (Tc = 25°C)
GT-P02W-XX
Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice. 9
Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice.
Dimensions (Unit: mm)
Tolerance +/-0.5mm
Typical Spatial Distribution (Tc = 25°C)
77
Intensity Distribution Diagram Intensity Distribution Curve
GT-P02W-XX
Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice. 10
Notes:The operational data provided above are for reference only. The actual operation should be strictly in accordance with product specifications, weldingmaterial characteristics fine-tuning parameters in the first test; Be sure to go through the first inspection for mass production, so as to avoid unnecessarylosses.
Reflow Soldering
Reflow Soldering Features Duration (Lead-free) Soldering Iron
Ramp up (Ts max to Tp) 3 °C /second max. Max. Temp Soldering Time
Preheat:(Tsmin) 90 °C
350°C 3 Seconds/time
Preheat:(Tsmax) 120 °C
Preheat:(tsmin to tsmax) 60-180 seconds
Temp Maintenance: (TL) 150 °C
Time Maintenance :(tL) 60-150 seconds
Peak Temp (Tp) 180 °C
(5°C before Reach 180 °C )(tp) 20-40 seconds
Ramp down 6 °C /second max.
25°C (Time to Reach Peak Temp) 6 minutes max.
GT-P02W-XX
Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice. 11
GT-P02W-XX
0.23
0.24
0.25
0.26
0.27
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
4440
3940
6500
3050
3360
3520
5000
5600
7500
8500
27602630
12A
12B
12C
12D
11A
11B
11C
11D
10A
10B
10C
10D
9A
9B
9C
9D
8A
8B
8C
8D
8E
8F
8G
7A
7B
7C
7D
7E
7F
7G
7H
6I
6J
6D
6E
6F
6G
6H
6A
6B
6C
5S
5T
5J
5K
5L
5Q
5R
5G
5H
5I
5O
5P
5D
5E
5F
5M
5N
5A
5B
5C
4S
4T
4J
4K
4L
4Q
4R
4G
4H
4I
4O
4P
4D
4E
4F
4M
4N
4A
4B
4C
3X
3Y
3M
3N
3O
3V
3W
3J
3K
3L
3T
3U
3G
3H
3I
3R
3S
3D
3E
3F
3P
3Q
3A
3B
3C
2N
2O
2G
2H
2I
2L
2M
2D
2E
2F
2J
2K
2A
2B
2C
0 23. 0 25. 0 27. 0 29. 0 31. 0 33. 0 35. 0 37. 0 39. 0 41. 0 43. 0 45. 0 47. 0 49. 0 51.
White Binning Information (1931CIE)
Black Body Locus
Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice.
Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice. 12
Test Items Test Conditions SampleSize Ac/Re
Aging TestIF=350MA Ta=25°C ×1000hrs 22 0/1
IF=350MA Ta=85°C ×1000hrs 22 0/1
High Temperature Storage 100°C × 1000 hours 22 0/1
Low Temperature Storage -40°C × 1000 hours 22 0/1
High Temp & Humidity IF=350MA 85°C , 85 %RH for 1000 hours 22 0/1
Temperature Shock -40°C × 30 minutes – +100°C × 30 minutes, 100 cycle 22 0/1
ESD (HBM) 2000V HBM/Time 10 0/1
Criteria for Judging LED Failure(Tc=25°C)
U refers to max value;S refers to initial value.Notes:Judging criteria based on Tc=25°C .
Reliability Tests
Items Symbol Test Conditions Criteria for Judging LED Failure
Forward Voltage VF IF=350MA >U × 1.1
Reverse Current IR VR=5V IR≥10μA
Luminous Flux φv IF=350MA <S × 0.7
10
GT-P02W-XX
Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice. 13
6.7425
17.5
Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice.
Packaging (Unit:mm)
Packaging②:Reel
Packaging①:Tube
42033
0
320
2404 4 0
2 5 5
1
②
①
②
6.7425
17.5
Standard Packaging Details
Tube: 50pcs/tubeAluminum Foil Bag: 1000pcs/bagCarton: 15Kpcs/carton
Standard Packaging Details
Reel: 1000pcs/reelCarton: 14Kpcs/carton
GT-P02W-XX
14
Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice.Copyright©2015 Getian Group. All rights reserved.The information in this document is subject to change without notice.
Notes
GETIAN GT-P LED
Product Specifications
This is a product family data sheet without extra emphasis on a specific model. The specifications in the document refers to its general valueunder certain test conditions. Please consult sales representative or technical people if encounters specs that are not listed. (Tolerance should beconsidered.)
Soldering
(a) Reflow soldering is allowed only once. (Do not use heating platform)(b) Do not press the lens when soldering manually.(c) Do not squeeze the PCB board after reflow soldering.(d) The high temperature PC lens products can pass 180 °C reflow soldering.
Service Conditions
The products must be operated within the rated range of parameters.
Installation
To avoid the led failure or decay to the lighting effects, do not burn the products’ light-emitting layer by high temperature soldering iron duringinstallation.
ESD Protection
Statics or surge volt would cause LED failure. When using the products, we suggest wearing anti-static wrist strap or gloves. All devices,equipment and machinery must be grounded. Precautions should be taken to protect the products from the surge voltage generated by thedevices. It is recommended to inspect each LED whether it is electrostatic damaged. Inspection can be done by a indicating lamp or low forwardcurrent test (suggest 90mA). The destroyed products shows different features, for example, the forward voltage becoming lower, or no lightemission under low current.
Heat Dissipation
The thermal design of the end product is particularly important, please consider it seriously. Do avoid high temperature condensation on theproduct.
Cleaning
Recommend ethanol as the only clean solvent.
Others
The bright light emitted by LED may hurt the eyes. Do not look directly at the products when not wearing protective glasses. The strong irritantglare makes people feel uncomfortable and precautions should be taken during usage.
GT-P02W-XX
15