DEPARTMENT OF ELECTRONIC AND COMMUNICATION ENGINEERING

At: Katpur , Dist & Ta:Patan Pin : 384265

GOVERNMENT ENGINEERING COLLEGE , PATAN

GSM BASED ADVANCE SECURITY AND REALTIME VEHICLE TRACKING USING GPS TECHNOLOGY

Prepared By: PATEL HARDIK J (090220111004)

THAKKAR NILESH H (090220111013)

PATEL DARSHAN J (090220111048)Guided By:

Prof. S L BHARVAD

A PROJECT PRESENTATION ON

CONTENT

• Abstract• Objective• Function• Block Diagram• Working Diagram• Circuit Diagram• Components• Features• Application• Conclusion

ABSTRACT

• In present life we all people can’t live without transportation service for proper and perfect communication.

• We also know that vehicle (car,truck,etc..) play an important role in today’s transportation service.

• The present vehicle(car,truck,etc..) alarm system are still of no match to the well-equiped thieves.

• So,we are going to introduces and describes the project offering higher level of vehicle (car,truck,etc..) security system. 

OBJECTIVE

•This project is capable of providing an effective two way communication between the alarm system and the vehicle(car,truck,etc..) owner.

• Additionally the vehicle(car,truck,etc..) owner can remotely control many of the car’s feature anytime and anywhere via cellphone using GSM technology.

• Based on GPS technology this system has also potential to provide realtime vehicle (car,truck,etc..) tracking , which we can include as a enhancement of this project over conventional security system of vehicle (car,truck,etc..). 

FUNCTION

•Location Tracking

• Vehicle (car,truck,etc..) Turnoff

BLOCK DIAGRAM

WORKING DIAGRAM

CIRCUIT DIAGRAM

COMPONENTS

•Microcontroller AT89S52

•GSM Modem For Remote Communication

•GPS Receiver For Location Information

•Relay

•Buzzer

Microcontroller AT89S52

•The microcontroller is the heart of this device.

•Microcontroller is a small computer on a single integrated circuit containing a processor core, data memory and programmable input/output peripherals.

• It is the interface between the GSM module and the GPS receiver.

• Microcontroller is programmed in such a way that it stimulates the GSM modem in message forwarding when a request is send by the user.

• Microcontrollers are much smaller and simplified so that they can include all the functions required on a single chip.

• Having the microcontroller is of great use, as it has low design cost and add intelligence to the system.

PIN CONFIGURATION

GSM Modem

•A GSM modem is a specialized type of modem which accepts a SIM card, and operates over a subscription to a mobile operator, just like a mobile phone.

•GSM (Global System for Mobile) uses a process called circuit switching.

•This method of communication allows a path to be established between two devices. • Once the two devices are connected, a constant stream of digital data is relayed.

• so by sending the command in the form of SMS we can control previously mentioned features of vehicle remotely.

GPS Receiver •The Global Positioning System (GPS) is the only fully functional Global Navigation System.

•The GPS uses a constellation of Medium Earth Orbit satellites thattransmit precise microwave signals that enable GPS receivers to determine their location, speed, direction, and time.

•A GPS receiver receives the signals from at least three satellites to calculate distance and uses a triangulation technique to compute its two dimension (latitude and longitude) position.

•Therefore GPS is a key technology for giving device its position.

• Application software used for location tracking

Relay

•Relays are electrical switches that open or close another circuit under certain conditions.

•Electrical relays control the flow of electricity to various components of larger circuits.

•Relays are generally used to protect circuit from damage due to high electrical ratings.

•In this project relay is used to show the demonstration of working of real time application device Solenoid Valve

Buzzer•Buzzers are simply a musical tone oscillator designed for audible indication of some alerts.

•Buzzers are generally electricaly operated device for indication.

•In this project Buzzer is used for audio indication of operation performed by device according to user command.

•Buzzer used in this project is simple pin terminal type buzzer for alert operation.

FEATURES

•Remote Communication Using GSM Modem

• Sends Location In The Form Of Latitude & Longitude

• Reliable For Remote Tracking

• Advance security in form of stolen alert and vehicle turn off

APPLICATIONS

•Vehicle tracking

• Animal tracking

• Vehicle security application

• Ambulance tracking

REFERENCES

Guides : INTERNAL: prof. S L BHARVAD

BOOK :  8051 microcontroller & embedded systems-By Mazidi Muhammad

WEB : www.ijecse.org www.mycollegeproject.com

FRIENDS

YOU

THANK