GRUNDFOS DATA BOOKLET

NK100-315/312A2F2AE-SBAQE Grundfos Pump 98318578

Thank you for your interest in our productsPlease contact us for more information, or visit our websitehttps://www.lenntech.com/grundfos/NKBASIS/98318578/NK-100-315-312-A2-F-A-E-BAQE.html

info@lenntech.comtel. +31-15-261.09.00fax. +31-15-261.62.89

BE > THINK > INNOVATE

Printed from Grundfos Product Centre [2018.02.043]

Position Qty. Description1 NK 100-315/312 A2-F-A-E-BAQE

Product No.: 98318578

Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 5199 withdimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions accordingto EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is ofthe back pull-out design enabling removal of the coupling, bearing bracket and impeller withoutdisturbing the motor, pump housing or pipework.

The unbalanced rubber bellows seal is according to DIN EN 12756.The pump is fitted with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mountedon a common base frame.

Further product detailsThe product's minimum efficiency index (MEI) is greater or equal to 0.70. This is by the CommissionRegulation (EU) considered as an indicative benchmark for best-performing water pump available onthe market as from 1 January 2013.

Pump and motor are mounted on a common steel base frame in accordance with ISO 3661. The backpull-out design together with a spacer coupling makes it possible to make service on the pump withoutdismantling the pump housing and motor from the base frame. This saves realignment of pump andmotor after service.1) Remove coupling.2) Remove the bolts in the bearing bracket support foot.3) Remove the bearing bracket from the pump housing.

Cast-iron parts have an epoxy-based coating made in a cathodic electro-deposition (CED) process.CED is a high-quality dip-painting process where an electrical field around the products ensuresdeposition of paint particles as a thin, well-controlled layer on the surface. An integral part of theprocess is a pretreatment. The entire process consists of these elements:1) Alkaline-based cleaning.2) Zinc phosphating.3) Cathodic electro-deposition.4) Curing to a dry film thickness 18-22 my m.The colour code for the finished product is NCS 9000/RAL 9005.

PumpThe pump housing has both a priming and a drain hole closed by plugs.The impeller is a closed impeller with double-curved blades with smooth surfaces. The impeller isstatically balanced according to ISO 1940-1 class G6.3 and hydraulically balanced to compensate foraxial thrust.Wear rings used in pump housing and for impeller are made of bronze/brass or cast iron.

The pump is fitted with an unbalanced rubber bellows seal with torque transmission across the springand around the bellows. Due to the bellows, the seal does not wear the shaft, and the axial movementis not prevented by deposits on the shaft.Primary seal:

- Rotating seal ring material: Carbon graphite, metal-impregnated- Stationary seat material: Silicon carbide (SiC)

Printed from Grundfos Product Centre [2018.02.043]

This material pairing has a very good corrosion resistance and is especially suitable for water up to +120 °C.However, seal life will be reduced at temperatures above +90 °C. The material pairing is not recommended forliquids containing particles as this will result in heavy wear on the SiC face.

Secondary seal material: EPDM (ethylene-propylene rubber)EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

The shaft is made of stainless steel and has a diameter of 32 mm where the coupling is mounted.The pump uses a spacer coupling between the pump and motor shaft.

MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standardsand mounting designation B3 (IM 1001). Electrical tolerances comply with IEC 60034.

The motor efficiency is classified as IE3 in accordance with IEC 60034-30.The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082.The protection reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalledconditions.Thermal switches must be connected to an external control circuit in a way which ensures that theautomatic reset cannot cause accidents. The motors must be connected to a motor-protective circuitbreaker according to local regulations.

The motor can be connected to a variable speed drive for adjustment of pump performance to any dutypoint. Grundfos CUE offers a range of variable speed drives. Please find more information in GrundfosProduct Center.

Technical data

Liquid:Pumped liquid: WaterLiquid temperature range: 0 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³

Technical:Speed for pump data: 1470 rpmRated flow: 179 m³/hRated head: 30.7 mActual impeller diameter: 312 mmImpeller nom: 315 mmPrimary shaft seal: BAQESecondary shaft seal: NONECurve tolerance: ISO9906:2012 3B

Materials:Pump housing: Cast iron

EN-GJL-250ASTM A48-40 B

Impeller: Cast ironEN-GJL-200ASTM A48-30 B

Rubber: EPDMWear ring mat.: High alloy brass(CuZn34Mn3AI2

Installation:Maximum ambient temperature: 55 °CMaximum operating pressure: 16 barFlange standard: EN 1092-2Pump inlet: DN 125

Printed from Grundfos Product Centre [2018.02.043]

Position Qty. DescriptionPump outlet: DN 100Pressure rating: PN 16Coupling type: SpacerBase frame: EN / ISO

Electrical data:Motor type: SIEMENSIE Efficiency class: IE3Rated power - P2: 22 kWMains frequency: 50 HzRated voltage: 3 x 380-420D/660-725Y VRated current: 42,5-40,5/24,6-23,6 AStarting current: 680-680 %Cos phi - power factor: 0,83Rated speed: 1470 rpmEfficiency: IE3 93,0%Motor efficiency at full load: 93.0-93.0 %Motor efficiency at 3/4 load: 93.7-93.7 %Motor efficiency at 1/2 load: 93.7-93.7 %Number of poles: 4Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): FLubricant type: Grease

Others:Minimum efficiency index, MEI ≥: 0.70ErP status: EuP Standalone/Prod.Net weight: 419 kgGross weight: 446 kgShipping volume: 1.11 m³

Printed from Grundfos Product Centre [2018.02.043]

98318578 NK 100-315/312 50 HzH

[m]

0

5

10

15

20

25

30

35

Q [m³/h]0 20 40 60 80 100 120 140 160 180 200 220

eta[%]

0

20

40

60

80

100

NK 100-315/312, 50Hz

312 mm

P[kW]

0

5

10

15

20

25

NPSH[m]

0

2

4

6

8

10P1

P2

Printed from Grundfos Product Centre [2018.02.043]

H[m]

0

5

10

15

20

25

30

35

Q [m³/h]0 50 100 150 200

eta[%]

0

20

40

60

80

100

NK 100-315/312, 50Hz

312 mm

P[kW]

0

5

10

15

20

25

NPSH[m]

0

2

4

6

8

10P1

P2

315

125

1001439

28940

100

610560480

636

350

8 x 19

8 x 19

140

= =1400

90

L3L2L1

+T +T+T

TO AMPLIFIERRELAY

IEC

TP2

11 T

HER

MAL

LY P

RO

TEC

TED

WH

EN T

HE

THER

MIS

TOR

S AR

EC

ON

NEC

TED

TO

AM

PLIF

IER

REL

AY F

OR

CO

NTR

OL

OF

MAI

N S

UPP

LYTH

ERM

ISTO

RS

PTC

AC

CO

RD

ING

TO

DIN

440

82

TO AMPLIFIERRELAY

+T +T+T

L1 L2 L3

Description ValueGeneral information:

Product name: NK 100-315/312A2-F-A-E-BAQE

Product No: 98318578EAN number: 5711492949757Technical:Speed for pump data: 1470 rpmRated flow: 179 m³/hRated head: 30.7 mActual impeller diameter: 312 mmImpeller nom: 315 mmPrimary shaft seal: BAQESecondary shaft seal: NONEShaft diameter: 32 mmCurve tolerance: ISO9906:2012 3BPump version: A2Materials:Pump housing: Cast iron

EN-GJL-250ASTM A48-40 B

Impeller: Cast ironEN-GJL-200ASTM A48-30 B

Material code: ARubber: EPDMCode for rubber: E

Wear ring mat.: High alloybrass(CuZn34Mn3AI2

Installation:Maximum ambient temperature: 55 °CMaximum operating pressure: 16 barFlange standard: EN 1092-2Connect code: FPump inlet: DN 125Pump outlet: DN 100Pressure rating: PN 16Coupling type: SpacerWear ring(s): neckring(s)Base frame: EN / ISOLiquid:Pumped liquid: WaterLiquid temperature range: 0 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³Electrical data:Motor type: SIEMENSIE Efficiency class: IE3Rated power - P2: 22 kWMains frequency: 50 HzRated voltage: 3 x 380-420D/660-725Y VRated current: 42,5-40,5/24,6-23,6 AStarting current: 680-680 %Cos phi - power factor: 0,83Rated speed: 1470 rpmEfficiency: IE3 93,0%Motor efficiency at full load: 93.0-93.0 %Motor efficiency at 3/4 load: 93.7-93.7 %Motor efficiency at 1/2 load: 93.7-93.7 %Number of poles: 4Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): FMotor protec: PTCMotor No: 98957807Lubricant type: Grease

100

1439

28940

610

560480

8 x 19

8 x 19

140

=

=

1400

90

Printed from Grundfos Product Centre [2018.02.043]

Description ValueOthers:Minimum efficiency index, MEI ≥: 0.70ErP status: EuP Standalone/Prod.Net weight: 419 kgGross weight: 446 kgShipping volume: 1.11 m³

Printed from Grundfos Product Centre [2018.02.043]

98318578 NK 100-315/312 50 Hz

Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.

315

12510

014

39

2894

0

100

610

560

480

636

350

8 x

19

8 x

19

140 =

=14

00

90

Printed from Grundfos Product Centre [2018.02.043]

98318578 NK 100-315/312 50 Hz

Note! All units are in [mm] unless others are stated.

L3L2L1

+T +T+T

TO AMPLIFIERRELAY

IEC

TP2

11 T

HER

MAL

LY P

RO

TEC

TED

WH

EN T

HE

THER

MIS

TOR

S AR

EC

ON

NEC

TED

TO

AM

PLIF

IER

REL

AY F

OR

CO

NTR

OL

OF

MAI

N S

UPP

LYTH

ERM

ISTO

RS

PTC

AC

CO

RD

ING

TO

DIN

440

82

TO AMPLIFIERRELAY

+T +T+T

L1 L2 L3

Disclaimer: The information about the Grundfos pump in this document may be outdated.Data may be subject to alterations without further notice.Please contact us to verify the data above is still accurate/up-to-date.

All information is copyright Grundfos.

info@lenntech.comwww.lenntech.comtel. +31-15-261.09.00fax. +31-15-261.62.89