Grove YB5520 · style jack cylinder on all four corners. Provides extended and down and retracted...
Transcript of Grove YB5520 · style jack cylinder on all four corners. Provides extended and down and retracted...
Features
• 18 t (20 USt) capacity
• 16,6 m (54.5 ft) four-section, four-plate full power boom
• 9,07 t (10 USt) deck carrying capacity
• Exclusive pivoting boom nose
Grove YB5520Product Guide
Features
The reach and capacity to get the job done The 5,64 m - 16,61 m (18.5 ft - 54.5 ft) four-section boom can be enhanced with optional boom extensions. The 4,6 m (15 ft) fixed swingaway extension offers a maximum tip height of 23,1 m (76 ft) while the 4,6 m - 7,6 m (15 ft - 25 ft) telescopic extension provides a maximum tip height of 26,2 m (86 ft). Both extensions can be offset 0, -15°, and -30° via the pivoting boom nose.
Pivoting boom noseThree-position mechanically offset (0°, 40°, and 80°), lowers boom nose head height by 40,5 cm (1.33 ft) when pivoted fully forward. Negative pivoting of 0°, 15°, and 30° allows boom extension offset capability.
OutriggersThe YB5520 outriggers are two position (0°and 100°) beam/jack style with inverted jack cylinders and pivoting pad.
Operator cabNew operator control layout with tilt/telescoping steering wheel. Automotive style dash panel gauges and indicator lights.
SteeringThe YB5520 comes standard with three steering modes: front (two-wheel), four-wheel coordinated, and four-wheel crab steer with electronic self alignment.Operators can choose between modes using a three-position rocker switch located on dash panel.
Contents
Specifications 4
Dimensions 7
Weights 8
Range diagram 9
Load chart 10
Metric 85% range diagram 12
Metric 85% load chart 13
DIN/ISO range diagram 15
DIN/ISO load chart 16
Rigging chart 18
Symbols glossary 19
4
Specifications
*Denotes optional equipment
Superstructure
Boom
5,64 m – 16,61 m (18.5 ft – 54.5 ft) four-section full power boom.Maximum tip height: 19,2 m (63 ft)
*Optional boom extensions
4,6 m (15 ft) fixed swingaway extension.Maximum tip height: 23,1 m (76 ft)
4,6 m – 7,6 m (15 ft – 25 ft) telescopic swingaway extension.Maximum tip height: 26,2 m (86 ft)Both extensions can be offset 0˚, -15˚, and -30˚ via pivoting boom nose.
Boom nose
Two sheave, quick reeve type with three- pinned pivoting (0˚, +40˚, and +80˚) design to minimize head space requirements. Lowers head height 40,5 cm (1.33 ft) when nose is pivoted fully forward.
Boom elevation
Two double acting hydraulic cylinders with integral holding valve. Elevation: 0˚ to 80˚.
Anti-two block device
Standard anti-two block device (hard wired), which, when activated, provides an audible and visual warning to the operator and “locks out” all functions whose movement can cause two-blocking.
Load Moment Indicator
A simple, effective, and easy to use load moment indicating system used in conjunction with the anti-two block system to assist the operator in efficient operation of the unit within the limits of the load chart. The display panel displays the max. load allowed, the actual hook load, length and angle of the boom, and load radius in Dot Matrix numerical values and provides a load utilization colored bar graph. Inputs by operator are maximum allowed load and parts of line. If non-permitted conditions are approached the L.M.I. will warn the operator with an audible alarm and a warning light and will lock out those functions that may aggravate the condition.
*Load Moment Indicator
“Graphics Display” of boom angle, boom length, loadradius, and capacity. Operator input to set the limitparameters based on the load chart. Displays colorcoded light bar and audible alarm with function cut-outif load exceeds the load chart parameters.
Swing
Ball bearing swing circle with 360˚ continuous rotation. Worm gear and pinion driven by hydraulic motor. Spring applied, hydraulic released brake.Maximum speed: 2.5 rpm
Hydraulic system
One pressure compensated variable displacement axial piston pump, with load sensing. Maximum output of: 155 LPM (41.0 GPM)Maximum operating pressure: 276 bars (4000 p.s.i.)Six-section valve bank, chassis mounted, operated via dash mounted pilot pressure hydraulic joystick controllers.151,4 L (40 gal) steel hydraulic reservoir with sight level gauge and steel side plating to guard against side impact. Return line replaceable filter with by-pass protection and service indicator. Cartridge filter rating of three micron.
Hoist specifications
Two speed gear motor driven hoist with automaticspring applied / hydraulically released wet brake.Smooth drum with cable follower.
Maximum hoist pull (first layer): 63,6 kN (14,300 lb)
Maximum permissible single line pull:44,5 kN (10,000 lb.) (3.5:1 design factor)
Maximum single line speed: 64 m/min (210 fpm)
Rope construction: 6 x 19 XXIPS / IWRC
Rope diameter: 14 mm (9/16 in)
Rope length: 97,5 m (320 ft)
Grove YB5520 5
Specifications
*Denotes optional equipment
Carrier
Chassis
High strength alloy frame constructed with integral outrigger housings; front and rear lifting, tie-down, and towing lugs. 6.2 m� (66.3 ft�) carrydeck size with 9072 kg (20,000 lb) deck only carrying capacity. Deck coated with anti-skid treatment.
Outriggers
Single stage hydraulic telescoping beam with oblique style jack cylinder on all four corners. Provides extended and down and retracted and down lifting capabilities. Integral holding valve on both beam and jack. Outrigger positioning indicator located in dash display. Outrigger pad size: 222 mm x 254 mm (8.75 in x 10 in)Maximum outrigger pad load: 15 876 kg (35,000 lb).
Outrigger controls
Independent outrigger control rocker switches for beam or jack selection with a separate extend /retract rocker selector switch. 360˚ level bubble located inside cab.
Fuel tank capacity
Steel with side impact plate. Capacity: 151,4L (40 gal).
Operators control station
Frame mounted, open air style control stationwith cab shell includes all crane functions anddriving controls and equipped with overheadsafety glass. Other standard equipment includesa suspension seat with seat belt, sight level bubbleand 1,1 kg (2.5 lb) fire extinguisher, and tilt steering wheel. The dash panel will display the fuel level gauge,water temperature gauge, engine r.p.m., battery voltage, and hour meter. Indicator lights will display parking brake, low transmission pressure, low brake pressure, oscillating axle lock, outrigger position, headlights, work lights (if ordered), and hoist 3rd wrap (if ordered). Crane function indicator and turn signal indicators are also included. The load indicator display will be mounted on the top of the dash panel for direct line of sight for the operator.
*Operators control station enclosed
Includes the standard cab shell and all controls and indicators noted above, with the addition of front, rear, and right side glass, a split (two-piece) hinged door with sliding glass, front windshield wiper and washer, hot water heater and defroster with fan and cab dome light.
Electrical system
One heavy duty maintenance free 12V battery, 820CCA at 0˚F.
Drive
Two-wheel (front-wheel) as standard with four-wheel drive as an option. Drive axles supplied with planetary hubs and limited slip differential.
Engine (Tier III)
Cummins QSB 3.3L four cylinder / turbo-charged diesel rated at 74 kW (99 hp) at 2600 r.p.m. Includes std. 110V engine block heater and air intake “Grid” heater. Engine hourmeter located in dash display. Alternator: 90 amp. Maximum Torque: 415 Nm (306 ft/lb).NOTE: Required for sale outside of North America and European Union countries.
Engine (Tier IV)
Cummins QSB 3,3 L four cylinder / turbo-charged diesel rated at 75 kW (100 hp) at 2600 rpm. Includes standard 110V engine block heater and air intake “Grid” heater. Engine hourmeter located in dash display. Alternator: 120 amp. Maximum Torque: 414 Nm (305 ft/lb). Fuel requirements: Maximum of 15 ppm sulphur content Requires “Ultra Low” diesel fuel.NOTE: Tier IV required for sale in North America and European Union countries.
Transmission
Powershift with four speeds forward and four reverse. Steering column mounted shifter.
6
Specifications
Gross vehicle weight (G.V.W.)
16 220 kg (35,758 lb) basic unit with Tier IV engine.
Miscellaneous standard equipment
18 t (20 USt) two-sheave low profile “galvanize coated”hook block with “quick reeve design”, back-up motion alarm, outrigger motion alarm, no-skid decking, front and rear lifting, towing, and tie-down lugs.
*Denotes optional equipment
Tires
Tubeless type, semi-aggressive tread. 12.00 R20
Brakes
Hydraulic actuated internal wet-disc service brake acting on each drive wheel. Dash mounted rocker switch with indicator light for activating or release of the dry disc parking brake mounted on the transmission output yoke.
Lights
Full LED lighting includes turn indicators, head, tail, brake, and hazard warning lights recessed mounted.
Maximum speed
33,8 km/h (21.0 mph)
Gradeability (theoretical)
68%.....(to drive train stall) NO LOAD40%....(to drive train stall) with 9072 kg(20,000 lb) DECK LOAD
Oscillation lockouts
Manual switch to engage and disengage the rear axle lockout located on dash panel. Engage if lifting over side, when on rubber, and in crab steer mode. Disengage to allow axle oscillation when traveling over rough terrain with boom directly over front.
Carrier continued
Suspension/axles
Front: Drive / steer in both two-wheel drive and four-wheel driveRear: non-drive with steer in two-wheel drive, drive/steer in four-wheel drive.
Front axle is rigid mounted to frame. Rear axle offers 1.5˚ of oscillation.
Steer
Standard three steering modes.Front (two-wheel), four-wheel coordinated, andfour-wheel crab steer with electronic self alignment.Three position rocker switch located on dash panel.
Outside Turning Radius:Two wheel steer: 6,2 m (20 ft 4.8 in)Four wheel steer: 3,9 m (13 ft 1 in)
*Optional equipment
Auxiliary Lighting: Includes cab mountedamber flashing light and dual base boom mountedLED work lights.Convenience Package: Includes front and rearpintle hitch, dual rear view mirrors, head and tail light metal mesh grille covers.Enclosed Cab Package: Includes heater and defroster, cab dome light, all window glass, and two-piece split door.Four-wheel driveBelow deck hydraulic tow winch with 4536 kg (10,000 lb) capacity.4,5 m (15 ft) fixed boom extension4,5 m – 7,6 m (15 ft – 25 ft) telescopic boom extensionAir conditioning (closed cab option required)Hoist third wrap indicator with hoist function cut-outHoist drum rotation indicator360˚ swing lockC.E. compliant package
7121 mm (280.3") Retracted5648 mm (222.3") Retracted16 612 mm (654.0") Extended
755 mm (29.7")
919 mm (36.2")24
65 m
m (9
7.0"
)
24°
2420 mm (95.3")4020 mm (158.3")
4597 mm (181")4658 mm (183.4")
1195 mm (47.0")1994 mm (78.5")
2283 mm (89.9")2313 mm (91.1")
1075 mm (42.3")
2569
mm
(101
.1")
179 mm (7.0")
1546
mm
(60.
9")
242 mm (9.5")
24°
Grove YB5520 7
Dimensions
2472 mm(97.3")
1283
mm
(50.
5")
R 2148 mm(84.6")Radius A
Radius B
Radius C
Radius DRadius E
1140 mm(44.9")
1431 mm(56.3")
80° 40°
Dimensions
A B C D E
Two-wheel steer
3375 mm(11 ft 1 in)
6058 mm(19 ft 10.5 in)
6218 mm(20 ft 4.8 in)
6675 mm(21 ft 10.8 in)
7407 mm(24 ft 3.6 in)
Four-wheel steer
1722 mm(5 ft 8 in)
3841 mm(12 ft 7 in)
3993 mm(13 ft 1 in)
4481 mm(14 ft 8 in)
5380 mm(171 ft 8 in)
Dimensions are shown in mm (in).
8
Weights
Weights
GVW Front Rear
kg lb kg lb kg lb
Basic machine: Including 16,6 m (54.5 ft) main boom, main hoist with 97,5 m (320 ft) of wire rope, 18 t (20 USt) hook block, full counterweight, Tier IV engine 16 220 35,758 6203 13,675 10 017 22,083
Add: 4,6 m (15 ft) fixed swingaway extension and extension carrier brackets and downhaul weight 199 438 323 713 -125 -275
Crane weight 16 419 36,196 6526 14,387 9893 21,809
Basic machine: Including 16,6 m (54.5 ft) main boom, main hoist with 97,5 m (320 ft) of wire rope, 18 t (20 USt) hook block, full counterweight, Tier IV engine 16 220 35,758 6203 13,675 10 017 22,083
Add: Enclosed cab, heater and glass 84,8 187 37,1 82 47,6 105
Crane weight 16 305 35,945 6240 13,757 10 064 22,188
Basic machine: Including 16,6 m (54.5 ft) main boom, main hoist with 97,5 m (320 ft) of wire rope, 18 t (20 USt) hook block, full counterweight, Tier IV engine 16 220 35,758 6203 13,675 10 017 22,083
Add: 4,6 m - 7,6 m (15 ft - 25 ft) telescopic swingaway extension and extension carrier brackets and downhaul weight 344 758 522 1151 -178 -393
Crane weight 16 564 36,516 6725 14,826 9839 21,690
LOAD DISTRIBUTION CHART
Maximum Allowable UniformlyDistributed Load
CAB
1
2AREA 14,01 m (43.2 sq.ft.) 5985 kg (13,195 lb)
AREA 22,15 m (23.1 sq.ft.) 3087 kg (6805 lb)
TOTAL6,16 m (66.3 sq.ft.) 9072 kg (20,000 lb)
1. Maximum travel speed with any or all loads - 4,0 km/h (2.5 MPH)2. Loads to be transported on smooth level firm surfaces only.3. Boom must be retracted and in center forward position.4. Any combination or total of areas 1 and 2 may be used.5. Lifting is not permitted when carry deck is loaded except for loading and unloading carry deck.6. Rated pick and carry loads may be transported on deck area 1 provided the load is cribbed directly on the frame rails.
2
2
2
Grove YB5520 9
Range diagram
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Operating radius in feet from axis of rotation
Hei
ght
fro
m t
he
gro
un
d in
feet
0°
18.5
' Bo
om
76
72
68
64
60
56
52
48
44
40
36
32
28
24
20
16
12
8
4
0
6
80
84
88
2
10
14
18
22
26
30
34
38
42
46
50
54
58
62
66
70
74
78
82
86
108 6 4 2 0 2 4 6 8 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76
108 6 4 2 0 2 4 6 8 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78
76
72
68
64
60
56
52
48
44
40
36
32
28
24
20
16
12
8
4
0
6
80
84
88
2
10
14
18
22
26
30
34
38
42
46
50
54
58
62
66
70
74
78
82
86
5°
10°
15°
25°
30°
35°
40°
45°50°
55°60°
65°70°
75°80°
20°
30.5
' Bo
om
42.5
' Bo
om
54.5
' Bo
om
69.5
' Bo
om
w
ith
15' j
ib79
.5' B
oo
m
wit
h 2
5' ji
b
10
Load chart
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
1) The rated loads are the maximum lift capacities as determined by operating radius, boom length and boom angle. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied.
2) The rated loads shown on outriggers do not exceed 85% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tip-ping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operat-ing radius and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of personnel and proper training must all be taken into account by the operator.
3) The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered part of the load. See above.
4) Ratings on outriggers are for either outriggers fully extended and down or fully retracted and down. Ratings for outriggers fully retracted and down will apply for any intermediate outrigger setting.
5) Ratings on rubber depend on 12.00R20 tire capacity, condition of tires and proper infla-tion pressure (130 psi). Loads on rubber may be transported at a maximum seed of 2.5 mph on a smooth, hard, level surface with boom retracted to the shortest length possible and centered over front. For 360° ratings on rubber, rear axle oscil-lation locks must be in place. Do not use jib with crane on rubber.
6) For operating radius not shown, use load rat-ing of next larger radius. 7) The maximum deck load only is 20,000 lb. Combined boom and deck loads are not permit-ted on rubber.
8) Do not induce any external side loads to boom or jib.
NOTES:SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY.
MAIN BOOM LOAD RATINGS ON OUTRIGGERSExtended and Down 360 ̊or Retracted and Down Front/Rear
1 8.5 ft BOOM 30.5 ft BOOM 42.5 ft BOOM 54.5 ft BOOM
Radius(ft)
RatedLoad
(lb)
BoomAngle(deg)
RatedLoad(lb)
BoomAngle(deg)
RatedLoad(lb)
BoomAngle(deg)
RatedLoad(lb)
BoomAngle(deg)
MAIN BOOM LOAD RATINGS ON OUTRIGGERSRetracted and Down 360˚
1 8.5 ft BOOM 30.5 ft BOOM 42.5 ft BOOM 54.5 ft BOOM
Radius(ft)
RatedLoad(lb)
BoomAngle(deg)
RatedLoad
(lb)
BoomAngle(deg)
RatedLoad
(lb)
BoomAngle(deg)
RatedLoad(lb)
BoomAngle(deg)
68101214151618202224262728303234363839404244464851
68101214151618202224262728303234363839404244464851
6557 .549.539.525.5 0 – – – – – – – – – – – – – – – – – – – –
6557 .549.539.525.5 0 – – – – – – – – – – – – – – – – – – – –
7 5.57 1 .567 .563
58.556.55449
43.537
29.519
0 – – – – – – – – – – – – –
7 5.57 1 .567 .563
58.556.55449
43.537
29.519
0 – – – – – – – – – – – – –
4000033850301 00269502355018 900
––––––––––––––––––––
24000240002400024000240002250021 0001845016300141 5012250107 0010050
–––––––––––––
–7 7 .5
757269
67 .5666360
56.553
49.547 .545.541 .537
31 .5251 6
0 – – – – – –
–7 7 .57 57 269
67 .5666360
56.553
49.547 .545.541 .537
31 .52516
0 – – – – – –
– –7 97 774.573.572.57 068
65.563
60.559.558
55.553504744
42.540.5
3733
28.523
0
– –7 97 7
7 4.57 3.57 2.57 068
65.563
60.559.55855.553504744
42.540.5
3733
28.523
0
– 2365021 550198501805017 2501655015250142501330012200107 50101 50960086207 7 907090647 059205680
– – – – – –
– –
1680015350141 001350013000121 0011 250105509940938091 208880843080207300668061 30589056505230485045004 1 803760
40000338502480017 900137 5012200
––––––––––––––––––––
24000240002295017 950145001300011 7 5097 8082507 040607 0527 04930
– – – – – – – – – – – – –
– 2365021 1 00167 50137 501260011 500959081 507 03061 205380505047 50423037 803380304027 402600
– – – – – –
– –
16800153501300011 95011 050956083607 360643056805350505045204050365033002980284027 1 024602240203018401580
15°
SIDE
SIDE
FRONT REAR
15°
30° 30°
Grove YB5520 11
Load chart
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
NOTES:JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART.
SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY.
1 5 FT JIB CAPACITIES ON EXTENDED OUTRIGGERSMain BoomAngle (deg)
Jib Offset Angle0 deg 15 deg 30 deg
To 42.5 ftMain Boom
To 54.5 ftMain Boom
To 42.5 ftMain Boom
To 54.5 ftMain Boom
Any BoomLength
807 57 0656055504540353025201 51 050
–930085507 9507 400695065005350455040503450330031 5030002800
––
–650061 0061 0056504350380035002800235021 50190017 50167 0
1550–––
–7 400695065005350455040503450300031 5030002800
–––––
–5650435038003500280023502 1 50190017 50167 01550
–––––
–3500280023502 1 50190017 50167 01550
––––––––
Radius (ft)
MAIN BOOM ON RUBBERAny Boom Length
Front Rating (lb) 360̊ Rating (lb)6810121415161820222426272830323436
39404244464851
16000141 0011 25098608 7008 1 907 7 2068906 1 80557 04990446042204 1 0036803300295026402350222021 6021 1 0191 017 201550131 0
15500135501080088807 420680063505890507 0437 037 603250301 0281 0269025802 1 301890165015401420130011 7 010309007 30
38
7
1 5 FT - 25 FT JIB CAPACITIES ON EXTENDED OUTRIGGERS1 5 FT Length 25 FT Length
J ib Offset Angle J ib Offset AngleMainBoomAngle(deg)
80757065605550454035302520151050
85006990594051 00440037 90327 0281 0242020901830163014901440144014401250
85506650558047 7 041 003540306026402290199017 5015601430137 0137 012801280
51 00440037 90327 0281 0242020901830163014901440144014401250
–––
47 7 041 003540306026402290199017 5015601430137 0137 012801250
–––
306026402290199017 5015601430137 0137 012801250
––––––
583051 20433037 1 031 9027 402350202017 301480129011 40104010001000900800
58004860407 03460297 02560220018901630141 012301090990950950900800
37 1 031 9027 402350202017 301480129011 40104010001000900800
– – –
3460297 02560220018901630141 012301090990950950900800
– – –
220018901630141 012301090990950950900800
– – – – – –
0 deg 15 deg 30 deg 0 deg 15 deg 30 degTo 42.5 ft
Main Boom
To 54.5 ft Main Boom
AnyBoom
Length
To 42.5 ft Main Boom
To 42.5 ft Main Boom
To 42.5 ft Main Boom
To 54.5 ft Main Boom
To 54.5 ft Main Boom
To 54.5 ft Main Boom
AnyBoom
Length
1) The rated loads are the maximum lift capacities as determined by operating radius, boom length and boom angle. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied.
2) The rated loads shown on outriggers do not ex-ceed 85% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operating radius and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of personnel and proper training must all be taken into account by the operator.
3) The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered part of the load. See above.
4) Ratings on outriggers are for either outriggers fully extended and down or fully retracted and down. Rat-ings for outriggers fully retracted and down will apply for any intermediate outrigger setting.
5) Ratings on rubber depend on 12.00R20 tire capacity, condition of tires and proper inflation pressure (130 psi). Loads on rubber may be transported at a maxi-mum seed of 2.5 mph on a smooth, hard, level surface with boom retracted to the shortest length possible and centered over front. For 360° ratings on rubber, rear axle oscillation locks must be in place. Do not use jib with crane on rubber.
6) For operating radius not shown, use load rating of next larger radius. 7) The maximum deck load only is 20,000 lb. Combined boom and deck loads are not permitted on rubber.
8) Do not induce any external side loads to boom or jib.
15°
SIDE
SIDE
FRONT REAR
15°
30° 30°
12
Metric 85% range diagram
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Operating radius in meters from axis of rotation
Hei
ght
fro
m t
he
gro
un
d in
met
ers
80° 75°70°
65°60°
55°50°
45°
40°
35°
30°
25°
20°
15°
10°
5°
0°
5,6
m B
OO
M9,
3 m
BO
OM
13,0
m B
OO
M16
,6 m
BO
OM
21,2
m B
OO
M
WIT
H 4
,6 m
JIB
24,2
m B
OO
M
WIT
H 7
,6 m
JIB
26,8
26,2
25,6
25,0
24,4
23,8
23,2
22,6
21,9
21,3
20,7
20,1
19,5
18,9
18,3
17,7
17,1
16,5
15,8
15,2
14,6
14,0
13,4
12,8
12,2
11,6
11,0
10,4
9,8
9,1
8,5
7,9
7,3
6,7
6,1
5,5
4,9
4,3
3,7
3,0
2,4
1,8
1,2
0,6
0
26,8
26,2
25,6
25,0
24,4
23,8
23,2
22,6
21,9
21,3
20,7
20,1
19,5
18,9
18,3
17,7
17,1
16,5
15,8
15,2
14,6
14,0
13,4
12,8
12,2
11,6
11,0
10,4
9,8
9,1
8,5
7,9
7,3
6,7
6,1
5,5
4,9
4,3
3,7
3,0
2,4
1,8
1,2
0,6
0
1,81,2
0,60
0,61,2
1,82,4
3,03,7
4,34,9
5,56,1
6,77,3
7,98,5
9,19,8
10,411,0
11,612,2
12,813,4
14,014,6
15,215,8
16,517,1
17,718,3
18,919,5
20,120,7
21,321,9
22,623,2
23,223,8
1,2 0 1,2 2,4 3,7 4,9 6,1 7,3 8,5 9,8 11,0 12,2 13,4 14,6 15,8 17,1 18,3 19,5 20,7 21,9 23,2 23,8
24,4
1,8 0,6 0,6 1,8 3,0 4,3 5,5 6,7 7,9 9,1 10,4 11,6 12,8 14,0 15,2 16,5 17,7 18,9 20,1 21,3 22,6 23,2 24,4
Grove YB5520 13
Metric 85% load chart
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
15°
SIDE
SIDE
FRONT REAR
15°
30° 30°
1) The rated loads are the maximum lift capacities as determined by operating radius, boom length and boom angle. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied.
2) The rated loads shown on outriggers do not exceed 85% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tip-ping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operat-ing radius and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of personnel and proper training must all be taken into account by the operator.
3) The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered part of the load. See reduction chart.
4) Ratings on outriggers are for either outriggers fully extended and down or fully retracted and down. Ratings for outriggers fully retracted and down will apply for any intermediate outrigger setting.
5) Ratings on rubber depend on 12.00R20 tire capacity, condition of tires and proper inflation pressure (8,96 bar). Loads on rubber may be transported at a maximum seed of 4,0 km/h on a smooth, hard, level surface with boom retracted to the shortest length possible and centered over front. For 360° ratings on rubber, rear axle oscil-lation locks must be in place. Do not use jib with crane on rubber.
6) For operating radius not shown, use load rat-ing of next larger radius. 7) The maximum deck load only is 9072 kg. Com-bined boom and deck loads are not permitted on rubber.
8) Do not induce any external side loads to boom or jib.
NOTES:SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY.
MAIN BOOM LOAD RATINGS ON OUTRIGGERSExtended and Down 360° or Retracted and Down Front/Rear
5,6 m BOOM 9,3 m BOOM 13,0 m BOOM 16,6 m BOOM
Radius(m)
RatedLoad(kg)
BoomAngle(deg)
RatedLoad(kg)
BoomAngle(deg)
RatedLoad(kg)
BoomAngle(deg)
RatedLoad(kg)
BoomAngle(deg)
MAIN BOOM LOAD RATINGS ON OUTRIGGERSRetracted and Down 360°
5,6 m BOOM 9,3 m BOOM 13,0 m BOOM 16,6 m BOOM
Radius(m)
RatedLoad(kg)
BoomAngle(deg)
RatedLoad(kg)
BoomAngle(deg)
RatedLoad(kg)
BoomAngle(deg)
RatedLoad(kg)
BoomAngle(deg)
635850
38,524,5
0 – – – – – – – – – – – – – – – – – – – –
635850
38,524,5
0 – – – – – – – – – – – – – – – – – – – –
74,571,567,562,558,5
5653,549
43,537
29,519,5 0 – – – – – – – – – – – – –
74,571,567,562,558,5
5653,549
43,537
29,519,5 0 – – – – – – – – – – – – –
18 00015 35013 65012 20010 375 8570
––––––––––––––––––––
10 87510 87510 87510 87510 87510 200 9525 8365 7390 6360 5560 4905 4610
–––––––––––––
–7875
71,569
67,5666360
56,553
49,547,546
41,536,5
3125
15,5 0 – – – – – –
–7875
71,569
67,5666360
56,553
49,547,546
41,536,5
3125
15,5 0 – – – – – –
– –79
76,574,573,572,57068
65,56361
59,558,5
5652,5504744
42,540,5
3733
28,523 0
––
7976,574,573,572,57068
65,56361
59,558,5
5652,5504744
42,540,5
3733
28,523 0
– 10 7259775
90008185782075056915646060305555490546304380394035103200293026902590 – – – – – –
– – 762069606395612058955485510047854505425541354025382036253300302027802670256523702200204519051715
18 00015 35011 550 7955 6150 5550
––––––––––––––––––––
10 87510 87510 5507955645558055255438037153195278024252270– – – – – – – – – – – – –
– 10 725969574306145563551704330369532002795246023152185195017151540139012551200 – – – – – –
– – 762069605810535049504285375533102900256524202285204518051625147013351270121011001005915830725
2,02,43,03,74,34,64,95,56,16,77,37,98,28,59,19,810,411,011,611,912,212,813,414,014,615,5
2,02,43,03,74,34,64,95,56,16,77,37,98,28,59,19,810,411,011,611,912,212,813,414,014,615,5
Radius (m)
MAIN BOOM ON RUBBERAny Boom Length
Front Rating (kg) 360° Rating (kg)2,02,43,03,74,34,64,95,56,16,77,37,98,28,59,19,8
10,411,011,611,912,212,813,414,014,615,5
67356145
48954025336530802880267 023001 9801 7 051 47 01 3651 27 51 2201 1 7 09658557 45695640590530465405330
6965639551 00447 0394537 1 535003 1 252800252522602020191 01860166514951335119510651005980955865780700590
0 deg 15 deg 30 degAny Boom
Length–
–
–
–
– –
––––
–
–––––––
– – – –
4,6 m FIXED J IB CAPACITIES ON EXTENDED OUTRIGGGERS (kg)Jib O�set Angle
To 13,0 mMain Boom
To 16,6 mMain Boom
To 13,0 mMain Boom
To 16,6 mMain Boom
80757065605550454035302520151050
158512701065975860790760700
33553150294524252060183515651495142513601270
256019701720158512701065975860790760700
42153875360533553150294524252060183515651495142513601270
294527652765256019701720158512701065975860790760700
–––––
Jib O�set Angle Jib O�set AngleMainBoomAngle(deg)
80757065605550454035302520151050
385531702690231019951715148012751095945830735675650650650565
387530152530216018601605138511951035900790705645620620580565
231019951715148012751095945830735675650650650565
–––
216018601605138511951035900790705645620620580565
–––
138511951035900790705645620620580565
––––––
2640232019601680144512401065915785670585515470450450405360
263022001845156513451160995855735640555490445430430405360
1680144512401065915785670585515470450450405360
–––
156513451160995855735640555490445430430405360
–––
995855735640555490445430430405360
––––––
4,6 m - 7,6 m TELE JIB CAPACITIES ON EXTENDED OUTRIGGGERS (kg)4,6 m Length 7,6 m Length
0 deg 15 deg 30 deg 0 deg 15 deg 30 degTo 13,0 m
MainBoom
To 16,6 mMainBoom
To 13,0 mMainBoom
To 16,6 mMainBoom
AnyMainBoom
To 13,0 mMainBoom
To 16,6 mMainBoom
To 13,0 mMainBoom
To 16,6 mMainBoom
AnyMainBoom
MainBoomAngle(deg)
14
Metric 85% load chart
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
NOTES:JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART.
SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY.
1) The rated loads are the maximum lift capacities as determined by operating radius, boom length and boom angle. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied.
2) The rated loads shown on outriggers do not ex-ceed 85% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operating radius and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of personnel and proper training must all be taken into account by the operator.
3) The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered part of the load. See reduction chart.
4) Ratings on outriggers are for either outriggers fully extended and down or fully retracted and down. Rat-ings for outriggers fully retracted and down will apply for any intermediate outrigger setting.
5) Ratings on rubber depend on 12.00R20 tire capacity, condition of tires and proper inflation pressure (8,96 bar). Loads on rubber may be transported at a maxi-mum seed of 4,0 km/h on a smooth, hard, level surface with boom retracted to the shortest length possible and centered over front. For 360° ratings on rubber, rear axle oscillation locks must be in place. Do not use jib with crane on rubber.
6) For operating radius not shown, use load rating of next larger radius. 7) The maximum deck load only is 9072 kg. Combined boom and deck loads are not permitted on rubber.
8) Do not induce any external side loads to boom or jib.
15°
SIDE
SIDE
FRONT REAR
15°
30° 30°
Grove YB5520 15
DIN/ISO range diagram
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Operating radius in meters from axis of rotationH
eigh
t fr
om
th
e gr
ou
nd
in m
eter
s80° 75°70°
65°60°
55°50°
45°
40°
35°
30°
25°
20°
15°
10°
5°
0°
5,6
m B
OO
M9,
3 m
BO
OM
13,0
m B
OO
M16
,6 m
BO
OM
21,2
m B
OO
M
WIT
H 4
,6 m
JIB
24,2
m B
OO
M
WIT
H 7,
6 m
JIB
26,8
26,2
25,6
25,0
24,4
23,8
23,2
22,6
21,9
21,3
20,7
20,1
19,5
18,9
18,3
17,7
17,1
16,5
15,8
15,2
14,6
14,0
13,4
12,8
12,2
11,6
11,0
10,4
9,8
9,1
8,5
7,9
7,3
6,7
6,1
5,5
4,9
4,3
3,7
3,0
2,4
1,8
1,2
0,6
0
26,8
26,2
25,6
25,0
24,4
23,8
23,2
22,6
21,9
21,3
20,7
20,1
19,5
18,9
18,3
17,7
17,1
16,5
15,8
15,2
14,6
14,0
13,4
12,8
12,2
11,6
11,0
10,4
9,8
9,1
8,5
7,9
7,3
6,7
6,1
5,5
4,9
4,3
3,7
3,0
2,4
1,8
1,2
0,6
0
1,81,2
0,60
0,61,2
1,82,4
3,03,7
4,34,9
5,56,1
6,77,3
7,98,5
9,19,8
10,411,0
11,612,2
12,813,4
14,014,6
15,215,8
16,517,1
17,718,3
18,919,5
20,120,7
21,321,9
22,623,2
23,223,8
1,2 0 1,2 2,4 3,7 4,9 6,1 7,3 8,5 9,8 11,0 12,2 13,4 14,6 15,8 17,1 18,3 19,5 20,7 21,9 23,2 23,8
24,4
1,8 0,6 0,6 1,8 3,0 4,3 5,5 6,7 7,9 9,1 10,4 11,6 12,8 14,0 15,2 16,5 17,7 18,9 20,1 21,3 22,6 23,2 24,4
16
DIN/ISO load chart
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
MAIN BOOM LOAD RATINGS ON OUTRIGGERSExtended and Down 360° or Retracted and Down Front/Rear
5,6 m BOOM 9,3 m BOOM 13,0 m BOOM 16,6 m BOOM
Radius(m)
RatedLoad(kg)
BoomAngle(deg)
RatedLoad(kg)
BoomAngle(deg)
RatedLoad(kg)
BoomAngle(deg)
RatedLoad(kg)
BoomAngle(deg)
MAIN BOOM LOAD RATINGS ON OUTRIGGERSRetracted and Down 360°
5,6 m BOOM 9,3 m BOOM 13,0 m BOOM 16,6 m BOOM
Radius(m)
RatedLoad(kg)
BoomAngle(deg)
RatedLoad(kg)
BoomAngle(deg)
RatedLoad(kg)
BoomAngle(deg)
RatedLoad(kg)
BoomAngle(deg)
635850
38,524,5
0 – – – – – – – – – – – – – – – – – – – –
635850
38,524,5
0 – – – – – – – – – – – – – – – – – – – –
74,571,567,562,558,5
5653,549
43,537
29,519,5 0 – – – – – – – – – – – – –
74,571,567,562,558,5
5653,549
43,537
29,519,5 0 – – – – – – – – – – – – –
18 00015 35013 65012 20010 375 8570
––––––––––––––––––––
10 87510 87510 87510 87510 425 9770 8975 7890 6880 5910 5145 4525 4250
–––––––––––––
–7875
71,569
67,5666360
56,553
49,547,546
41,536,5
3125
15,5 0 – – – – – –
–7875
71,569
67,5666360
56,553
49,547,546
41,536,5
3125
15,5 0 – – – – – –
– –79
76,574,573,572,57068
65,56361
59,558,5
5652,5504744
42,540,5
3733
28,523 0
– –79
76,574,573,572,57068
65,56361
59,558,5
5652,5504744
42,540,5
3733
28,523 0
– 10 7259775
90008185782075056915646059205155454542854045363532302930267524502355 – – – – – –
– – 762069606395612058955485510047854505425541354025371033053005275025252430233021501990184517101535
18 00014 82510 725 7955 6150 5550
––––––––––––––––––––
10 87510 87595357320605055955110438037153195278024252270 – – – – – – – – – – – – –
– 10 725857067055610521547904155364532002795246023152185195017151540139012551200 – – – – – –
– – 762061855225487044903915345530702750248023552240203518051625147013351270121011001005915830725
2,02,43,03,74,34,64,95,56,16,77,37,98,28,59,19,810,411,011,611,912,212,813,414,014,615,5
2,02,43,03,74,34,64,95,56,16,77,37,98,28,59,19,810,411,011,611,912,212,813,414,014,615,5
15°
SIDE
SIDE
FRONT REAR
15°
30° 30°
1) The rated loads are the maximum lift capacities as determined by operating radius, boom length and boom angle. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied.
2) The rated loads shown on outriggers do not exceed 80% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tip-ping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operat-ing radius and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of personnel and proper training must all be taken into account by the operator.
3) The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered part of the load. See reduction chart.
4) Ratings on outriggers are for either outriggers fully extended and down or fully retracted and down. Ratings for outriggers fully retracted and down will apply for any intermediate outrigger setting.
5) Ratings on rubber depend on 12.00R20 tire capacity, condition of tires and proper inflation pressure (8,96 bar). Loads on rubber may be transported at a maximum seed of 4,0 km/h on a smooth, hard, level surface with boom retracted to the shortest length possible and centered over front. For 360° ratings on rubber, rear axle oscil-lation locks must be in place. Do not use jib with crane on rubber.
6) For operating radius not shown, use load rat-ing of next larger radius. 7) The maximum deck load only is 9072 kg. Com-bined boom and deck loads are not permitted on rubber.
8) Do not induce any external side loads to boom or jib.
NOTES:SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY.
Grove YB5520 17
DIN/ISO load chart
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Radius (m)
MAIN BOOM ON RUBBERAny Boom Length
Front Rating (kg) 360° Rating (kg)2,02,43,03,74,34,64,95,56,16,77,37,98,28,59,19,8
10,411,011,611,9
12,212,813,414,014,615,5
673561 4548954025336530802880267 02300198017 0514701365127 5122011 7 09658557 45695640590530465405330
6965639551 0044 70394537 1 535003 1 252800252521 95191017 8517 25160514051260113010159659308657 807 05640550
0 deg 15 deg 30 degAny Boom
Length–
–
–
–
– –
––––
–
–––––––
– – – –
4,6mFIXED JIB CAPACITIES ON EXTENDED OUTRIGGGERS (kg)Jib O�set Angle
To 13,0 mMain Boom
80757065605550454035302520151050
158512701065975860790760700
33553150294524252060183515651495142513601270
256019701720158512701065975860790760700
42153875360533553150290024252060183515651465142513601270
294527652765256019701720158512701065975860790760700
–––––
Jib O�set Angle Jib O�set AngleMainBoomAngle(deg)
807 57 065605550454035302520151050
385531702690231019951715148012751095945830735675650650650565
387530152530216018601605138511951035900790705645620620580565
231019951715148012751095945830735675650650650565
–––
216018601605138511951035900790705645620620580565
–––
138511951035900790705645620620580565
––––––
2640232019601680144512401065915785670585515470450450405360
263022001845156513451160995855735640555490445430430405360
1680144512401065915785670585515470450450405360
–––
156513451160995855735640555490445430430405360
–––
995855735640555490445430430405360
––––––
4,6 m - 7,6 m TELE JIB CAPACITIES ON EXTENDED OUTRIGGGERS (kg)4,6 m Length 7,6 m Length
0 deg 15 deg 30 deg 0 deg 15 deg 30 degTo 13,0 m
MainBoom
To 16,6 mMainBoom
To 13,0 mMainBoom
To 16,6 mMainBoom
AnyMainBoom
To 13,0 mMainBoom
To 16,6 mMainBoom
To 13,0 mMainBoom
To 16,6 mMainBoom
AnyMainBoom
MainBoomAngle(deg)
To 13,0 mMain Boom
To 16,6 mMain Boom
To 16,6 mMain Boom
NOTES:JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART.
SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY.
1) The rated loads are the maximum lift capacities as determined by operating radius, boom length and boom angle. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied.
2) The rated loads shown on outriggers do not exceed 80% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operating radius and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of personnel and proper training must all be taken into account by the operator.
3) The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered part of the load. See reduc-tion chart.
4) Ratings on outriggers are for either outriggers fully extended and down or fully retracted and down. Ratings for outriggers fully retracted and down will apply for any intermediate outrigger setting.
5) Ratings on rubber depend on 12.00R20 tire capacity, condition of tires and proper inflation pressure (8,96 bar). Loads on rubber may be transported at a maxi-mum seed of 4,0 km/h on a smooth, hard, level surface with boom retracted to the shortest length possible and centered over front. For 360° ratings on rubber, rear axle oscillation locks must be in place. Do not use jib with crane on rubber.
6) For operating radius not shown, use load rating of next larger radius. 7) The maximum deck load only is 9072 kg. Combined boom and deck loads are not permitted on rubber.
8) Do not induce any external side loads to boom or jib.
15°
SIDE
SIDE
FRONT REAR
15°
30° 30°
18
Rigging chart
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
WIRE ROPE: 14 mm Diameter 8 X 25 Galv.Minimum required breaking strength = 19,867 kg
RIGGING CHART
4-PART0-18,144 kg
1-PART0-4536 kg
YB5520 (DIN/ISO)
WIRE ROPE: 9/16" Diameter 6 X 19 BrightMinimum required breaking strength = 37,000 lb
RIGGING CHART
4-PART0-40,000 lb
1 -PART0-10,000 lb
YB5520
MAXIMUM PERMISSIBLE SINGLE LINE PULL = 10,000 lb
WIRE ROPE: 14 mm Diameter 6 X 19 Bright.Minimum required breaking strength = 18,143 kg
RIGGING CHART
4-PART0-18,144 kg
1-PART0-4536 kg
YB5520 (Metric 85%)
MAXIMUM PERMISSIBLE SINGLE LINE PULL = 4536 kg
MAXIMUM PERMISSIBLE SINGLE LINE PULL = 4536 kg
PIVOT HOLE PATTERN+80°
+40°
0°-15°-30°
PIVOT
G7 1006099
LOW HEADROOM OPERATION(45° MAX. BOOM ANGLE;SINGLE PART LINE ONLY)
LOW HEADROOM OPERATION(55° MAX. BOOM ANGLE)
STANDARD HEADROOM OPERATION(80° MAX. BOOM ANGLE)NO OFFSET J IB OPERATION(75° MAX. BOOM ANGLE)
OFFSET J IB OPERATION(80° MAX. BOOM ANGLE)
Rating reductions for load handling devices installed kg (lb)From main boom From jib
Main block 161 kg (356 lb)* Not applicableHook and ball 48 kg (105 lb) * 48 kg (105 lb)
Jib stowed No reduction Not applicable4,6 m (15 ft) jib deployed 317 kg (700 lb) No reduction
4,6 m - 7,6 m (15 ft - 25 ft) jib deployed 544 kg (1200 lb) No reduction*Refer to rating plate for actual weight
Grove YB5520 19
Symbols glossary
Drive
RotationElectrical system
Suspension
Fuel tank capacity
Tires
Engine
Brakes
Outrigger controls
Axles Outriggers
Transmission
Frame
Steering
Lights
Boom elevation
Cab
Swing
Hydraulic system
Hoist
Boom nose
Radius
Boom extension
Boom length
Grade
Gear
Boom
Counterweight
Speed
Oil
Extension
HookblockH
Heavy duty jib
©2013 ManitowocForm No. YB5520 PGPart No. 13-003 /2M /0113 www.manitowoccranes.com
This document is non-contractual. Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment, and price changes without notice. Illustrations shown may include optional equipment and accessories and may not include all standard equipment.
Regional offices
ChinaShanghai, China Tel: +86 21 6457 0066Fax: +86 21 6457 4955
Greater Asia-Pacific Singapore Tel: +65 6264 1188 Fax: +65 6862 4040
Europe, Middle East, Africa Ecully, France Tel: +33 (0)4 72 18 20 20 Fax: +33 (0)4 72 18 20 00
Americas Manitowoc, Wisconsin, USA Tel: +1 920 684 6621 Fax: +1 920 683 6277
Shady Grove, Pennsylvania, USA Tel: +1 717 597 8121 Fax: +1 717 597 4062
Regional headquarters
Manitowoc Cranes
ChinaBeijingChengduGuangzhouXian
Greater Asia-PacificAustraliaBrisbaneMelbourneSydneyIndiaChennaiDelhiHyderabadPuneKoreaSeoulPhilippinesMakati CitySingapore
FactoriesBrazilPasso FundoChinaTaiAnZhangjiagangFranceCharlieuMoulinsGermanyWilhelmshavenIndiaPuneItalyNiella TanaroPortugalBaltarFânzeresSlovakiaSarisUSAManitowoc Port WashingtonShady Grove
AmericasBrazilAlphavilleMexicoMonterreyChileSantiago
Europe, Middle East, AfricaCzech RepublicNetvoriceFranceBaudemontCergyDecinesGermanyLangenfeldHungaryBudapestItalyLainateNetherlandsBredaPolandWarsawPortugalBaltarRussiaMoscowSouth AfricaJohannesburgU.A.E.DubaiU.K.Buckingham