Grove-900H
description
Transcript of Grove-900H
National Crane 900H SeriesProduct Guide
Features • 32 m (105 ft) four-section boom • 24,5 t (27 USt) rating
• Multi-position Easy Reach control panel
• Graphical LMI
Features
Graphical LMIThe Graphical Load Moment Indicator (LMI) is standard on all Series 900H machines. The LMI system displays all crane load lifting values simultaneously while providing real-time information about the crane and truck operating system and includes work area definition system (WADS) and operating limits. The LMI is also waterproof and visible in full or low light.
"HO"-style outriggersTwo sets of “HO”- style outriggers with 6,09 m (20 ft) full span, 4,27 m (14 ft) mid span setting with manual locks and fully retracted outrigger spread. Main outriggers are equipped with removable ball and socket aluminum foot pads.
Options to get the job done• Anaugerattachmentisavailableonthe
28,9 m (95 ft) boom reaching a max digging radius of 11,8 m (39 ft) with full outrigger span
• Personnelbasketoptionsareavailabletoallowversatility in operating conditions
Easy Reach controls The Easy Reach control station can be tilted to the right or left side of the crane as needed and can be stowed in the center position for transport. The single axis pilot operated crane controls allow smooth operation for each crane function.
Features
Improved serviceability and reliability helps keep you working longer
•Bearingsontheboomandretractcablescanbegreasedthroughaccessholesintheboomsideplates
•Numberofinternalboompartshasbeenreduced,deceasingservicetimewhenrebuildingthemachine
•Internalanti-two-blockwireroutingeliminatesdamagepotential
•Paintingcranecomponentsbeforeassemblyreducesthepossibilityofrust,improvesserviceabilityandenhances the appearance of the machine
•Stateoftheartcontrolvalveprovidessmootheroperation.Thenewdesigneliminatesparts,reducingrepair costs and improving the machines serviceability
•Speedy-reeveboomtipandsheaveblockssimplifyriggingchangesbydecreasingthetimeneededtochange line reeving
Performance you can rely on
•TheSeries900Hisstandardwith410°non-continuousrotation
•Two-speedhoistprovidesfasterwinchpayoutandpickupofunloadedcable
•Thestrongerstandardtorsionboximprovesrigidity,reducestruckframeflexand reduces the need for counterweight
•Acontrolknoblocatedontheswingmotorbrakereleasevalvecanbeeasilyadjusted to the crane operator's swing speed preference
•EasyGlideboomwearpadsreducethe conditions that cause boom chatter and vibration. The net result is smoother crane operation
*Product may be shown with optional equipment.
4
Contents
Features 2
Mounting configurations 5
Specifications 6
Capacities 8
Dimensions 14
Accessories 15
5Series 900H
Mounting configuration
���°
FULL CAPACITYWORK AREA ���� lb BARE MIN.
��,��� lb GARW MIN.���� lb BARE MIN.��,��� lb GARW MIN.
���.�� MIN.
���.�� MIN.��.�� MIN.
��.�����.�� MIN.
���.�����.��
NOTE: 95’ BOOM SHOWN
The mounting configuration is based on an 85% stability factor. If the bare truck weight requirements are not met, counterweight will be required. The complete unit must be installed on the truck in accordance with factory requirements. Since individual truck chassis vary, a test must be performed on the unit to verify actual stability after mounting and counter-weighting (if required). A summary of mounting and truck requirements are:For 180 degree working area – Gross Axle Weight Rating Front (GAWR) – 9072 kg
(20,000 lb)Gross Axle Weight Rating Rear (GAWR) – 18 144 kg
(40,000 lb)Gross Vehicle Weight Rating (GVW) – 27 216 kg
(60,000 lb)Wheelbase(WB)–6,50m(256in)Cab to Axle Trunnion (CT) – 4,90 m (193 in)After Frame (AF) – 2,67 m (105 in) min.Frame Section Modulus (SM) from outrigger to
RSOD – 327cm3 (20 in3)and759MPa (110,000 psi) material
Barechassisweightrequiredforstabilitypriortoinstallation
Front – 3992 kg (8880 lb) Rear – 4309 kg (9500 lb)For 360 degree working area – Optional Single Front Stabilizer (SFO)Gross Axle Weight Rating Front (GAWR) – 9072 kg
(20,000 lb)Gross Axle Weight Rating Rear (GAWR) – 18 144 kg
(40,000 lb)Gross Vehicle Weight Rating (GVW) – 27 216 kg
(60,000 lb)Wheelbase(WB)–6,50m(256in)Cab to Axle Trunnion (CT) – 4,90 m (193 in)After Frame (AF) – 2,67 m (105 in) min.Frame Section Modulus (SM) from front spring hanger
to end of after frame – 327cm3 (20 in3) and 759MPa(110,000psi)material
Barechassisweightrequiredforstabilitypriortoinstallation
Front – 3992 kg (8800 lb) Rear – 4309 kg (9500 lb)
Note: Chassis will require extended front frame rails for SFO addition.For 360˚ stability the truck frame must have a 327 cm3 (20.0 in3)sectionmodulus[248,566N.m(2,200,000in-lb)RBM]minimumunderthecraneframe, 245 cm3 (15 in3) section modulus [186,424 N.m(1,650,000in-lb)RBM]atthefrontspringrearhanger, 163 cm3 (10 in3) section modulus [124,283 N.m(1,100,000in-lb)RBM]throughthefrontspringand 49 cm3 (3 in3)sectionmodulus[37,284N.m(330,000in-lb)RBM]atthestabilizerattachmentpoint on each truck frame rail.NOTE 1: Gross Vehicle Weight Rating (GVWR) is
dependent on all components of the vehicle (axles, tires, springs, fame, etc.) meeting manufacturers’ recommendations; always specify GVWR when purchasing trucks.
NOTE 2: Diesel engines require a variable speed governor and energize-to-run fuel solenoid for smooth crane operation; electronic fuel injection is required.
NOTE 3: AllmountingdataisbasedonaNationalSeries 900H with subbase and an 85% stability factor.
NOTE 4: The complete unit must be installed in accordance with factory requirements, and a test performed to determine actual stability and counterweight requirements; contact the factory for details.
NOTE 5: Transmission neutral safety interlock switch is required. Truck transmission must be capable of having a neutral safety switch added.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
6
Specifications
Model 969H — Equipped with a 6,6 m – 21,03 m (21.75 ft – 69 ft) four-section boom. Maximum tip height is 23,77 m (78 ft).
6,7 m – 21,05 m (22 ft – 69 ft) four-section boom.
Model 995H — Equipped with a 8,99 m – 29,0 m (29.5 ft – 95 ft) four-section boom. This model can be equipped with a 7,62 m –13,41 m (25 ft – 44 ft) two section jib. Maximum tip height with 13,41 m (44 ft) jib is 44,63 m (148 ft).
8,83 m – 29,0 m (29 ft – 95 ft) four-section boom. 9FJ44M 7,62 m – 13,41 m (25 ft – 44 ft) two-section jib
Model 9105H — Equipped with a 9,69 m – 32,0 m (32 ft – 105 ft) four-section boom. This model can be equipped with a 7,62 m – 13,41 m (25 ft – 44 ft) two-section jib. Maximum tip height with 13,41 m (44 ft) jib is 49,68 m (158 ft).
10,05 m – 32,0 m (33 ft – 105 ft) four-section boom. 9FJ44M 7,62 m – 13,41 m (25 ft – 44 ft) two-section jib
Note: Maximum tip height is measured with outriggers/stabilizers fully extended.
Boom and jib combinations data
Available in three basic models.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
7Series 900H
Specifications
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
900H winch data
NOTICE• Do not deadhead line block
against boom tip when extending boom
• Keep at least � wraps of loadline on drum at all times
• Use only �/�� in diameter rotation resistant cable with ��,��� lb breaking strength on this machine
• Maximum capacity with high speed winch is ���� lb
� part line � part line � part line � part line � part line
Maximum Boom Length at Maximum Elevation with Rigging Shown with Load
Block at Ground Level
�� ft boom��� ft
Boom and jib�� ft �� ft �� ft �� ft
� part line
�� ft
� part line
�� ft
� t Downhaul weight ��� lb�� t � sheave block ��� lb�� t � sheave block ��� lb�� t � sheave block ��� lb
Winch Cable supplied
Average breaking strength
Lift and speed
Lift and speed
Lift and speed
Lift and speed
Lift and speed
Lowspeedwinch
�/�� in diameterrotationresistant
��,��� lb ���� lb��� fpm
��,��� lb�� fpm
��,��� lb�� fpm
��,��� lb�� fpm
��,��� lb�� fpm
Lift and speed
��,��� lb�� fpm
Lift and speed
��,��� lb�� fpm
Highspeedwinch
�/�� in diameterrotationresistant
��,��� lb ���� lb���+ fpm
���� lb��� fpm
���� lb��� fpm
��,��� lb�� fpm
��,��� lb�� fpm
��,��� lb�� fpm
��,��� lb�� fpm
WinchStandard planetary
�th layer drum pull���� lb �low speed�
����� lb “burst of speed”�
Allowable cable pull���� lb
All winch pulls and speeds are shown on the fourth layer. Winch line pulls would increase on the first, second and third layers. Winch line speed would decrease on the first, second and third layers. Winch line pulls may be limited by the winch capacity or the ANSI � to � cable safety factor. These are shown below:
��� ft boom��� ft
Boom and jib��� ft �� ft �� ft �� ft �� ft �� ft
8THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Capacities
Series 995H: 29 m (95 ft) boom with 7,62 m – 13,41 m (25 ft – 44 ft) jib, full span outrigger and stabilizer
CAUTION:• Do not operate crane booms, jib extensions, any
accessories or loads within 3 m (10 ft) of live power lines or other conductors of electricity.
• Jibandboomcapacitiesshownaremaximumforeachsection.
• Donotexceedcapacitiesatreducedradii.• Loadratingsshownontheloadratingchartsare
maximum allowable loads with the outriggers properly extended on a firm, level surface and the crane leveled and mounted on a factory recommended truck.
• Alwayslevelthecranewiththelevelindicatorlocatedonthe crane.
• Theoperatormustreduceloadtoallowforfactorssuchas wind, ground conditions, operating speeds and their effects on freely suspended loads.
• Overloadingthiscranemaycausestructuralcollapseorinstability.
• Weightsonanyaccessoriesattachedtotheboomorloadline must be deducted from the load chart capacities.
• Donotexceedjibcapabilitiesatanyreducedboomlengths.
• Donotdeadheadlineblockagainstboomtipwhenextending boom or winching up.
• Keepatleastthreewrapsofloadlineondrumatalltimes.• Useonlyspecifiedcablewiththismachine.
NationalCranewillsendyouachartonrequest–oryoumaysecureneededloadratinginformationthroughyournearestNationalCrane dealer.
Load chart
Note:1. All capacities are in pounds, angles in degrees and radii in feet.2. Loaded boom angles are given as reference only.3. Shaded areas are structurally limited capacities.4. Handling of personnel is only permitted with full span extension of all outrigger and
stabilizer beams.
�
Do not move unloaded boom
beyond limit line
Operating radiusfrom C/L rotation
with unloaded boom
� �� �� �� �� ��� ���
RADIUS IN FEET
�
��
��
��
��
���
���
���
���
HEI
GH
T IN
FEE
T
�st Jib��'
�nd Jib��'
BOO
M L
ENG
TH IN
FEE
T
��
��
��
��
��
��
��°��°
��°
��°
��°
��°
��°
�°���°
��°
Structural LimitLine with ��' JibErected
Structural Limit Linewith ��' Jib Erected
Stability LimitLine with ��� lb Block
D
��.�°
��.�°
A
B
C
��' FULL SPANOUTRIGGER LOCK PINS MUST BE DISENGAGED
��'�" FULL SPAN
FULL SPANFULL SPANMID SPAN MID SPAN
STABILIZER LOCK PINS MUST BE DISENGAGED
�� ft � �� ft BOOM RATED LOADS WITHOUT JIB
�� ftBOOM
�lb�
LOADEDBOOMANGLE�deg�
A�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
B�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
C�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
D�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
�� ftBOOM
�lb�
LOADEDBOOMANGLE�deg�
LOADEDRADIUS
�ft�
����������������������������������������
��.���.���.���.���.���.���.���.�
�
��.���.�����.���.�����.���.���.�
�
��.���.���.���.���.���.���.���.���.���.�
�
��.���.���.���.���.���.���.���.���.���.���.���.�
�
��.���.���.���.���.���.���.���.���.���.���.���.�
�
��.���.���.���.���.���.���.���.���.���.���.���.���.���.�
�
��,�����,�����,�����,�����,�����,�����,�����,���
����
��,�����,�����,�����,�����,�����,�����,�����,�������
����
��,�����,�����,�����,�����,�������������������������������
����
��,�����,�����,���������������������������������������
����
��,�����,�����������������������������������������������������
RATED LOAD REDUCTIONS WITH STOWED JIB�� ft � �� ft JIB STOWED
BOOMLENGTH
�ft�
������������
Reduce load ��� lbReduce load ��� lbReduce load ��� lbReduce load ��� lbReduce load ��� lbReduce load ��� lb
��,�����,�����,�����,�����,�����,�������������������
����
�� ft � �� ft JIB RATED LOADS
�� ftJIB�lb�
LOADEDBOOMANGLE�deg�
�� ftJIB�lb�
LOADEDBOOMANGLE�deg�
LOADEDRADIUS
�ft�
������������������������������
���
����.���.���.���.���.�
����.���.���.���.���.�
����.�
����.���.���.���.���.���.���.�
����.���.���.���.���.�
������������������������������������������������������
������������������������������������������������������
9Series 900H
Capacities
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Series 995H: 29 m (95 ft) boom with 7,62 m – 13,41 m (25 ft – 44 ft) jib, mid span outrigger and stabilizer
CAUTION:• Do not operate crane booms, jib extensions, any
accessories or loads within 3 m (10 ft) of live power lines or other conductors of electricity.
• Jibandboomcapacitiesshownaremaximumforeachsection.
• Donotexceedcapacitiesatreducedradii.• Loadratingsshownontheloadratingchartsaremaximum
allowable loads with the outriggers properly extended on a firm, level surface and the crane leveled and mounted on a factory recommended truck.
• Alwayslevelthecranewiththelevelindicatorlocatedonthe crane.
• Theoperatormustreduceloadtoallowforfactorssuchaswind, ground conditions, operating speeds and their effects on freely suspended loads.
• Overloadingthiscranemaycausestructuralcollapseorinstability.
• Weightsonanyaccessoriesattachedtotheboomorloadlinemust be deducted from the load chart capacities.
• Donotexceedjibcapabilitiesatanyreducedboomlengths.• Donotdeadheadlineblockagainstboomtipwhen
extending boom or winching up.• Keepatleastthreewrapsofloadlineondrumatalltimes.• Useonlyspecifiedcablewiththismachine.
NationalCranewillsendyouachartonrequest–oryoumaysecureneededloadratinginformationthroughyournearestNationalCrane dealer.
Load chart
Do not move unloaded boom
beyond limit line
Operating radiusfrom C/L rotation
with unloaded boom
� �� �� �� �� ��� ���
RADIUS IN FEET
�
��
��
��
��
���
���
���
���
HEI
GHT
IN F
EET
BOO
M L
ENGT
H IN
FEE
T
��°��°
��°
��°
��°
��°
��°
�°���°
��°��.�°
Structural LimitLine with ��' JibErected
Structural Limit Linewith ��' Jib Erected
Stability LimitLine with ��� lb Block
�st Jib��'
�nd Jib��'
��
��
��
��
��
��
��.�°
��.�°
A
B
C
D
��' MID SPANOUTRIGGER LOCK PINS MUST BE ENGAGED
��' MID SPANSTABILIZER LOCK PINS MUST BE ENGAGED
MID SPAN MID SPAN
RATED LOAD REDUCTIONS WITH STOWED JIB�� ft � �� ft JIB STOWED
BOOMLENGTH
�ft�
������������
Reduce load ��� lbReduce load ��� lbReduce load ��� lbReduce load ��� lbReduce load ��� lbReduce load ��� lb
�� ft � �� ft BOOM RATED LOADS WITHOUT JIB
�� ftBOOM
�lb�
LOADEDBOOMANGLE�deg�
A�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
B�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
C�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
D�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
�� ftBOOM
�lb�
LOADEDBOOMANGLE�deg�
LOADEDRADIUS
�ft�
������������������������������
��.���.���.���.���.���.���.���.�
�
��.���.�
����.���.�
����.���.���.�
�
��.���.���.���.���.���.���.���.���.�
��
�
��.���,���.���.���.���.�
����.���.���.���.���.�
��.� ����.���.���.�
����.���.���.���.�
��.���.���.���.���.���.���.���.���.�
��,�����,�����,�����,�����,�����,�����,�������
����
��,�����,�����,�����,�����,�����,���������������
����
��,�����,�����,�����,���������������������������
����
��,�����,�����,�������������������������������������
��,�������������������������������������
�����������������������������������
LOADEDRADIUS
�ft�
��������������������
�� ft � �� ft JIB RATED LOADS
�� ftJIB�lb�
LOADEDBOOMANGLE�deg�
�� ftJIB�lb�
LOADEDBOOMANGLE�deg�
����.���.���.���.���.���.���.�
����.���.���.���.���.���.���.�
������������������������������
�������������������������������
Note:1. All capacities are in pounds, angles in degrees and radii in feet.2. Loaded boom angles are given as reference only.3. Shaded areas are structurally limited capacities.4. Handling of personnel is only permitted with full span extension of all outrigger and
stabilizer beams.
10
Capacities
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Series 995H: 29 m (95 ft) boom with no jib, retracted outrigger and stabilizer
CAUTION:• Do not operate crane booms, jib extensions, any accessories
or loads within 3 m (10 ft) of live power lines or other conductors of electricity.
• Jibandboomcapacitiesshownaremaximumforeachsection.• Donotexceedcapacitiesatreducedradii.• Loadratingsshownontheloadratingchartsaremaximum
allowable loads with the outriggers properly extended on a firm, level surface and the crane leveled and mounted on a factory recommended truck.
• Alwayslevelthecranewiththelevelindicatorlocatedonthecrane.
• Theoperatormustreduceloadtoallowforfactorssuchaswind, ground conditions, operating speeds and their effects on freely suspended loads.
• Overloadingthiscranemaycausestructuralcollapseorinstability.
• Weightsonanyaccessoriesattachedtotheboomorloadlinemust be deducted from the load chart capacities.
• Donotexceedjibcapabilitiesatanyreducedboomlengths.• Donotdeadheadlineblockagainstboomtipwhenextending
boom or winching up.• Keepatleastthreewrapsofloadlineondrumatalltimes.• Useonlyspecifiedcablewiththismachine.
NationalCranewillsendyouachartonrequest–oryoumaysecureneededloadratinginformationthroughyournearestNationalCrane dealer.
Load chart
�� ft � �� ft BOOM RATED LOADS WITHOUT JIB
�� ftBOOM
�lb�
LOADEDBOOMANGLE�deg�
A�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
B�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
C�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
D�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
�� ftBOOM
�lb�
LOADEDBOOMANGLE�deg�
LOADEDRADIUS
�ft�
������������������
��.���.���.���.�
�� ����.�
��
�
��.���.���.�
����.���.���.���.�
��.���.���.���.���.���.���.�
��.���.���.���.���.���.�
��.���.���.���.�
��.���.���.�
��,�����,�����,�����,�������������������
����
��,�����,�����,�����������������������
��,��������������������������
�����������������������
���������������
�����������
RATED LOAD REDUCTIONS WITH STOWED JIB
�� ft � �� ft JIB STOWEDBOOM
LENGTH�ft�
������������
Reduce load ��� lbReduce load ��� lbReduce load ��� lbReduce load ��� lbReduce load ��� lbReduce load ��� lb
Do not move unloaded boom
beyond limit line
Operating radiusfrom C/L rotation
with unloaded boom
� �� ��
RADIUS IN FEET
�
��
��
��
��
���
���
HEI
GH
T IN
FEE
T��°
��°
��°��°�°���°
��°
��°
BStability Limit Linewith ��� lb block
��°
BO
OM
LEN
GTH
IN F
EET
C
A
D
��
��
��
��
��
��
��°��.�°
��.�°
��.�°
�'��" RETRACTEDOUTRIGGER LOCK PINS MUST BE DISENGAGED
�' RETRACTEDSTABILIZER LOCK PINS MUST BE DISENGAGED
Note:1. All capacities are in pounds, angles in degrees and radii in feet.2. Loaded boom angles are given as reference only.3. Shaded areas are structurally limited capacities.4. Handling of personnel is only permitted with full span extension of all outrigger and stabilizer beams.
11Series 900H
Capacities
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Series 9105H: 32 m (105 ft) boom with 7,62 m – 13,41 m (25 ft – 44 ft) jib, full span outrigger and stabilizer
CAUTION:• Do not operate crane booms, jib extensions, any
accessories or loads within 3 m (10 ft) of live power lines or other conductors of electricity.
• Jibandboomcapacitiesshownaremaximumforeachsection.
• Donotexceedcapacitiesatreducedradii.• Loadratingsshownontheloadratingchartsaremaximum
allowable loads with the outriggers properly extended on a firm, level surface and the crane leveled and mounted on a factory recommended truck.
• Alwayslevelthecranewiththelevelindicatorlocatedonthecrane.
• Theoperatormustreduceloadtoallowforfactorssuchaswind, ground conditions, operating speeds and their effects on freely suspended loads.
• Overloadingthiscranemaycausestructuralcollapseorinstability.
• Weightsonanyaccessoriesattachedtotheboomorloadlinemust be deducted from the load chart capacities.
• Donotexceedjibcapabilitiesatanyreducedboomlengths.• Donotdeadheadlineblockagainstboomtipwhenextending
boom or winching up.• Keepatleastthreewrapsofloadlineondrumatalltimes.• Useonlyspecifiedcablewiththismachine.
NationalCranewillsendyouachartonrequest–oryoumaysecureneededloadratinginformationthroughyournearestNationalCrane dealer.
Load chart
Do not move unloaded boom
beyond limit line.
Operating radiusfrom C/L rotation
with unloaded boom
0 20 40 60 80 100 120
RADIUS IN FEET
0
20
40
60
80
100
120
140
160
HEI
GH
T IN
FEE
T
1st Jib25'
2nd Jib44'
BO
OM
LEN
GTH
IN F
EET
61
90
105
76
32
46
CBA D
80°
70°
60°
40°
30°
20°
10°
0°-10°
50°
48°
Structural LimitLine with 44' JibErected
Structural Limit Linewith 25' Jib Erected
Stability LimitLine with 150 lb Block
50.8°
20' FULL SPANOUTRIGGER LOCK PINS MUST BE DISENGAGED
18'6" FULL SPAN
FULL SPANFULL SPANMID SPAN MID SPAN
STABILIZER LOCK PINS MUST BE DISENGAGED
Note:1. All capacities are in pounds, angles in degrees and radii in feet.2. Loaded boom angles are given as reference only.3. Shaded areas are structurally limited capacities.4. Handling of personnel is only permitted with full span extension of all outrigger and
stabilizer beams.
�� ft � ��� ft BOOM RATED LOADS WITHOUT JIB
�� ftBOOM
�lb�
LOADEDBOOMANGLE�deg�
A�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
B�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
C�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
D�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
��� ftBOOM
�lb�
LOADEDBOOMANGLE�deg�
LOADEDRADIUS
�ft�
��
��������������������������������������
��.���.���.���.���.���
��.���.�
�
��.���
��.���.���
��.���.���.���.���.�
�
��.���.���.���.���.���.���.���.���.���.���.�
�
��.���.���.���.���.���.���.���.���.���
��.���.���.�
�
��.���.���.���.���
��.���.���.���.���.���
��.���
��.�
�
��.���.���.���.���.���.���.���
��.���.���.���.���.���.�
��,�����,�����,�����,�����,�����,�����,�����,���
����
��,�����,�����,�����,�����,�����,�����,�����,���
��������
����
��,�����,�����,�����,���������������������������������������
����
��,�����,��������������������������������������������������
���
�� ,�����������������������������������������������������
�� ft � �� ft JIB RATED LOADS
�� ftJIB�lb�
LOADEDBOOMANGLE�deg�
�� ftJIB�lb�
LOADEDBOOMANGLE�deg�
LOADEDRADIUS
�ft�
������������������������
��.���.���.���.���.���.���.���
��.���
��.���.���.���.���.���.���.���.���.���.���
��������������������������������������
������������������������������������������
��,�����,�����,�����,�����,�����,�����������������������
����
RATED LOAD REDUCTIONS WITH STOWED JIB
�� ft � �� ft JIB STOWEDBOOM
LENGTH�ft�
�������������
Reduce load ��� lbReduce load ��� lbReduce load ��� lbReduce load ��� lbReduce load ��� lbReduce load ��� lb
12
Capacities
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Series 9105H: 32 m (105 ft) boom with 7,62 m – 13,41 m (25 ft – 44 ft) jib, mid span outrigger and stabilizer
CAUTION:• Do not operate crane booms, jib extensions, any accessories
or loads within 3 m (10 ft) of live power lines or other conductors of electricity.
• Jibandboomcapacitiesshownaremaximumforeachsection.• Donotexceedcapacitiesatreducedradii.• Loadratingsshownontheloadratingchartsaremaximum
allowable loads with the outriggers properly extended on a firm, level surface and the crane leveled and mounted on a factory recommended truck.
• Alwayslevelthecranewiththelevelindicatorlocatedonthecrane.
• Theoperatormustreduceloadtoallowforfactorssuchaswind, ground conditions, operating speeds and their effects on freely suspended loads.
• Overloadingthiscranemaycausestructuralcollapseorinstability.
• Weightsonanyaccessoriesattachedtotheboomorloadlinemust be deducted from the load chart capacities.
• Donotexceedjibcapabilitiesatanyreducedboomlengths.• Donotdeadheadlineblockagainstboomtipwhenextending
boom or winching up.• Keepatleastthreewrapsofloadlineondrumatalltimes.• Useonlyspecifiedcablewiththismachine.
NationalCranewillsendyouachartonrequest–oryoumaysecureneededloadratinginformationthroughyournearestNationalCrane dealer.
Load chart
Note:1. All capacities are in pounds, angles in degrees and radii in feet.2. Loaded boom angles are given as reference only.3. Shaded areas are structurally limited capacities.4. Handling of personnel is only permitted with full span extension of all outrigger and
stabilizer beams.
Do not move unloaded boom
beyond limit line
Operating radiusfrom C/L rotation
with unloaded boom
� �� �� �� �� ��� ���
RADIUS IN FEET
�
��
��
��
��
���
���
���
���
HEI
GH
T IN
FEE
T
�st Jib��'
�nd Jib��'
BO
OM
LEN
GTH
IN F
EET
��
��
���
��
��
��
CBA
80°70°
60°
63°
40°
30°
20°
10°
0°-10°
50°50.1°
Structural LimitLine with 44' JibErected
Structural Limit Linewith 25' Jib Erected
Stability LimitLine with 150 lb Block
D
��' MID SPANOUTRIGGER LOCK PINS MUST BE ENGAGED
��' MID SPANSTABILIZER LOCK PINS MUST BE ENGAGED
MID SPAN MID SPAN
�� ft � ��� ft BOOM RATED LOADS WITHOUT JIB
�� ftBOOM
�lb�
LOADEDBOOMANGLE�deg�
A�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
B�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
C�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
D�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
��� ftBOOM
�lb�
LOADEDBOOMANGLE�deg�
LOADEDRADIUS
�ft�
����������������������������
��.���.���.���.���.�
����.���.�
�
��.���
��.���.�
����.���.���.���.���.�
�
��.���.���.���.���.���.�
����.���.���.���.�
��.���.���.���.���.���.���
��.���.���.���.�
��.���
��.���.���.���.���.���.���.�
��.���.���.���.���
��.���.�
��
��,�����,�����,�����,�����,�����,�����,�������
����
��,�����,�����,�����,�����,�����,�������������������
����
��,�����,�����,�����,������������������������������
��,�����,�����,���������������������������������
��,����������������������������������
�������������������������������
�� ft � �� ft JIB RATED LOADS
�� ftJIB�lb�
LOADEDBOOMANGLE�deg�
�� ftJIB�lb�
LOADEDBOOMANGLE�deg�
LOADEDRADIUS
�ft�
������������
��.���.���
��.���.���
��.���.�
���������������
���������������
RATED LOAD REDUCTIONS WITH STOWED JIB
�� ft � �� ft JIB STOWEDBOOM
LENGTH�ft�
�������������
Reduce load ��� lbReduce load ��� lbReduce load ��� lbReduce load ��� lbReduce load ��� lbReduce load ��� lb
13Series 900H
Capacities
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Series 9105H: 32 m (105 ft) boom with no jib, retracted span outrigger and stabilizer
CAUTION:• Do not operate crane booms, jib extensions, any
accessories or loads within 3 m (10 ft) of live power lines or other conductors of electricity.
• Jibandboomcapacitiesshownaremaximumforeachsection.
• Donotexceedcapacitiesatreducedradii.• Loadratingsshownontheloadratingchartsaremaximum
allowable loads with the outriggers properly extended on a firm, level surface and the crane leveled and mounted on a factory recommended truck.
• Alwayslevelthecranewiththelevelindicatorlocatedonthe crane.
• Theoperatormustreduceloadtoallowforfactorssuchaswind, ground conditions, operating speeds and their effects on freely suspended loads.
• Overloadingthiscranemaycausestructuralcollapseorinstability.
• Weightsonanyaccessoriesattachedtotheboomorloadline must be deducted from the load chart capacities.
• Donotexceedjibcapabilitiesatanyreducedboomlengths.• Donotdeadheadlineblockagainstboomtipwhen
extending boom or winching up.• Keepatleastthreewrapsofloadlineondrumatalltimes.• Useonlyspecifiedcablewiththismachine.
NationalCranewillsendyouachartonrequest–oryoumaysecureneededloadratinginformationthroughyournearestNationalCrane dealer.
Load chart
Note:1. All capacities are in pounds, angles in degrees and radii in feet.2. Loaded boom angles are given as reference only.3. Shaded areas are structurally limited capacities.4. Handling of personnel is only permitted with full span extension of all outrigger and stabilizer beams.
�� ft � ��� ft BOOM RATED LOADS WITHOUT JIB
�� ftBOOM
�lb�
LOADEDBOOMANGLE�deg�
A�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
B�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
C�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
D�� ft
BOOM�lb�
LOADEDBOOMANGLE�deg�
��� ftBOOM
�lb�
LOADEDBOOMANGLE�deg�
LOADEDRADIUS
�ft�
������������������
��.���.���.���.���.�
����.���.�
��.���.���.���.���.���.���.�
��.���.���.���.���.���.�
��.���.���.���.���.�
��.���.���.���.�
��.���.���.�
��,�����,�����,�����,�������������������
��,�����,�����������������������
��,�����������������������
��������������������
���������������
�����������
RATED LOAD REDUCTIONS WITH STOWED JIB
�� ft � �� ft JIB STOWEDBOOM
LENGTH�ft�
�������������
Reduce load ��� lbReduce load ��� lbReduce load ��� lbReduce load ��� lbReduce load ��� lbReduce load ��� lb
Do not move unloaded boom
beyond limit line
Operating radiusfrom C/L rotation
with unloaded boom
� �� ��
RADIUS IN FEET
�
��
��
��
��
���
���
HEI
GH
T IN
FEE
T
��°
��.�°
��.�°
��.�°
��.�°
��.�°
��°
��
��
��
���
��
��
��°��°�°���°
��°��.�°
��°
B
A
Stability Limit Linewith ��� lb block
��°
BO
OM
LEN
GTH
IN F
EET
C
D
��°
�'��" RETRACTEDOUTRIGGER LOCK PINS MUST BE DISENGAGED
�' RETRACTEDSTABILIZER LOCK PINS MUST BE DISENGAGED
14
Dimensions
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
DO N
OT SC
ALE D
RAW
ING
DO N
OT SC
ALE D
RAW
ING
mainl
ayou
t SHEE
T 1 O
F 1SC
ALE:
1:128 W
EIGHT
:
ATITLE
:
53
21
6102
(240
.22)
FU
LL-S
PAN
EXT
ENSI
ON
4267
(168
.00)
MID
-SPA
N E
XTEN
SIO
N
2854
(112
.36)
2438
(96.
00)
2261
(89.
00)
RETR
ACTE
D
610
(24.
00]TA
ILSW
ING
1898
(74.
70)
943
(37.
12)
1986
(78.
19)
C/L
ROTA
TIO
N
784
(30.
88)
1462
(57.
57)
2281
(89.
8)
2946
(116)
MO
UN
TIN
G SU
RFAC
E
2216
(87.
25)
9105
H9,
69 m
(32')
RET
RACT
ED32
m (1
05')
EXTE
ND
ED
995H
8,99
m (2
9'6'
') RE
TRAC
TED
28,9
6 m
(95')
EXT
END
ED
969H
6,63
m (2
1'9'')
RETR
ACTE
D21
m (6
9') E
XTEN
DED
NO
TE: A
ll di
men
sion
s ar
e in
mm
�in�
unl
ess
othe
rwis
e sp
ecifi
ed
1456
(57.
34)
MO
UN
TIN
G SU
RFAC
E
G
H
GH
Wei
ght
969H
1699
mm
(66.
9 in
)13
64 m
m (5
3.7
in)
8258
kg
(18,
206
lb)
995H
2423
mm
(95.
4 in
)15
04 m
m (5
9.2
in)
9232
kg
(20,
352
lb)
9105
H26
54 m
m (1
04.9
in)
1539
mm
(60.
6 in
)95
66 k
g (2
1,09
0 lb
)
Abo
ve w
eigh
ts a
nd c
ente
rs o
f gra
vity
do
not
incl
ude
rese
rvoi
r, R
SOD
, jib
, PTO
, pum
p, b
ed, S
FO.
Wei
ght
and
cent
ers
of g
ravi
ty in
clud
e bo
om, w
inch
, rop
e, t
urre
t, li
ft c
ylin
der,
fram
e, c
ontr
ols,
ou
trig
gers
, pla
tfor
ms,
tor
que
box,
boo
m re
st, b
umpe
r, d
ownh
aul w
eigh
t.
15Series 900H
Accessories
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Radio Remote Control – Four-function radio remote control for standard unit and 6-function remotes with auger. • NB6R
Steel Bulkhead • BHSD
Outrigger Motion Alarms – Available for HO outriggers and RSOD stabilizers. • OMA-2
Steel tool box options – 36 in and 48 in long
Spanish-language Danger Decals, function control labels • SDD and Operators’ Manuals • SOM
One-person basket – Strong but lightweight steel basket with 139 kg (300 lb) capacity, gravity hung • B1-S with swing lock and full body harness. • 2B1-S (for dual locking baskets)
Heavy-duty personnel basket – 544 kg (1200 lb) capacity steel basket with safety loops for two passengers. Gravity leveling 183 cm x 107 cm (72 in x 42 in) platform. Fast attachment and secure locking • BSA-1 systems. Load chart must show 1043 kg (2300 lb) minimum to operate this accessory. • BSA-R1 (provides rotation)
• BSAY-1 • BSAY-2
Winch drum Rotation Indicator • WDRI
Auger option 95 ft boom only 14,000 ft-lb two speed auger. Maximum digging radius 39 ft (full outrigger and stabilizers only).
Oil Cooler Oil coolers recommended for duty cycle applications. • OC
Hinged Vandal Cover Protector • VCP With keyed lock for LMI display.
This document is non-contractual. Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment, and price changes without notice. Illustrations shown may include optional equipment and accessories and may not include all standard equipment.
AmericasBrazilAlphavilleMexicoMonterreyChileSantiago
Europe, Middle East & AfricaAlgeriaHydraCzech RepublicNetvoriceFranceBaudemontCergyDecinesGermanyLangenfeldHungaryBudapestItalyParabiagoNetherlandsBredaPolandWarsaw
PortugalBaltarLisbonRussiaMoscowU.A.E.DubaiU.K.Gawcott
Asia - PacificAustraliaBrisbaneMelbourneSydneyChinaBeijingXi’anIndiaHyderabadPuneKoreaSeoulPhilippinesMakati CitySingapore
FactoriesBrazilAlphavilleChinaTaiAnZhangjiagangFranceCharlieuLa ClayetteMoulinsGermanyWilhelmshavenIndiaPuneItalyNiella TanaroPortugalBaltarFânzeresSlovakiaSarisUSAManitowoc Port WashingtonShady Grove
Regional offices
Manitowoc - Asia Pacific Shanghai, China Tel: +86 21 6457 0066Fax: +86 21 6457 4955
Manitowoc - Europe, Middle East & Africa Ecully, France Tel: +33 (0)4 72 18 20 20 Fax: +33 (0)4 72 18 20 00
Manitowoc - Americas Manitowoc, Wisconsin, USA Tel: +1 920 684 6621 Fax: +1 920 683 6277
Shady Grove, Pennsylvania, USA Tel: +1 717 597 8121 Fax: +1 717 597 4062
©2009 ManitowocPrinted in USAForm No. 900HPart No. 900H / 0809 / 2.5M www.manitowoc.com
Regional headquarters