Group 2 Mortice Locks & Conversion SetsLocks & Night Latches Subject to exchange rate fluctuations....

The global leader in dooropening solutions

Group 2Mortice Locks &Conversion Sets

Group 2Mortice Locks Introduction

Features andFunctions

The UNION name has been synonymous with mortice locks since 1840. Today, UNION produce a wide range of productssuitable for both architectural specification and residential use.

The following diagram gives an overview of the main features and functions of a UNION morticelock.

Key ControlSystems

Finishes

UNION lever mortice locks can be supplied individually keyed, keyed alike, key to pass ormasterkeyed. See individual product pages for details. For cylinder mortice locks, please check thespecification of each appropriate cylinder for keying information.

UNION mortice locks are available in a variety of finishes. See individual product pages for details.

LockingMechanism

Dead Locking

Locking the bolt sothat it cannot beforced back

Automatic

Key

Thumbturn

Every timethe door isclosed it isdeadlocked

External orinternaloperation

Internalknob

Operating Mechanism

The means by which the lock is operatedLever Operated Cylinder Operated

Lever Euro OvalMortice Profile Profile

Lockcase

Inner Forend Outer Forend

Follower

Deadbolt Strike Plate

LatchBolt

Latch

Deadbolt

DeadlockingLatch

2.1


Sizing a Lock To help you select the correct mortice lock, the following is a basic guide to the key measurementsand dimensions.There are three main dimensions that apply to both lever operated locks and cylinder lock cases,namely: Case Size, Backset and Centres

Case Size

The distance from the frontof the outer forend to the

back of the case

Backset

Distance from the outerforend to centre of the

follower or keyhole.

The measurement isimportant when replacing

existing locks.

Centres

Distance between thecentre of follower and the

centre of the keyhole.

This measurement isimportant for selection ofdoor furniture end plates.

Handing of Locks A hinged door opens in one of four ways. Some UNION mortice locks will need you to specify whichhanding you require on order.For details on handing, please refer to the introduction section.

RebateComponents

On Rebated Meeting Styles of double door leafs to align the active and inactive door leafs.

Grading of Locks

‘Commercial’ Grade locks

‘Standard’ Grade locks

are the premier range and are recommended for use in all applications e.g. Residential, Private Sector, Commercial Office,Retail and Entertainment Complexes and the whole spectrum of Public Sector Developments. These locks are of superior engineering design, robustconstruction, use thicker gauge metals and are subject to stringent testing. Their performance is guaranteed subject to correct application.

are designed to meet the demand for lower cost locks by Private and Public Sector developers who need to meet strict budgetaryconstraints. The locks are “value engineered” to meet functional requirements at reduced costs. The performance of this range will be inferior to that of“Commercial” Grade locks and ASSA ABLOY do not guarantee their performance in high traffic situations and in conditions where they could be subject toabuse. Caution should be exercised when using these locks in combination with heavy unsprung or poorly sprung lever handles.

2.2


RebateConversion Sets

Locks fitted to double leaf doors with rebated meeting stiles require Rebate Conversion Sets. Figure6 illustrates the two component parts of a typical Rebate Conversion Set, namely the striking plateportion which is fitted to the inactive leaf and the forend strip which is fitted behind the forendplate of the lock in the active leaf.

UNION Rebate Conversion Sets suit doors with 13mm deep rebated meeting stiles.

Active Leaf Inactive Leaf

2.3

Group 2Mortice Locks Horizontal & Dead

Locks

Subject to exchange rate fluctuations.Prices exclude VAT and are for registeredvendors only.Full specification available on request or online.

L-2041-152

Oval Cylinder HorizontalLock Case (Commercial)

Cylinder separate seesection 9

2077-152

3 Lever Horizontal Lock(Commercial) 36 Key Differs

21311-76

2 Lever Dead Lock(Standard) 18 Key Differs

2157-78

3 Lever Dead Lock(Standard) 36 Key Differs

21314-76

Bathroom W/C Dead lockStandard

SS2016

Note:

Forend Finish:

Lever Locks are supplied with 2 keys as standard. For additional keys see group 10

PL - BrassSS - Stainless Steel

StandardL-2041-152PLL-2041-152SS

Standard

Keyed Alike

2077-152PL2077-152SC

2077-152PLKA2077-152SCKA

2077-152PLMKD2077-152SCMKD

2077-152PLGMK2077-152SCGMK

Master Keyed

Grand Master Keyed Standard21311-76SS21311-76PL

Standard

Keyed Alike

2157-78PL2157-78SS

2157-78PLKA2157-78SSKA

2157-78PLMKD2157-78SSMKD

2157-78PLGMK2157-78SSGMK

Master Keyed

Grand Master Keyed Standard21314-76PL21314-76SS

StandardSS2016SS

Bathroom W/C Dead lock

2.4


L-21315-76

Euro Profile Cylinder DeadLock Case (Standard)


L-2109-78 L-2141-78

Oval Cylinder Dead LockCase (Commercial)


StandardL-21315-76SSL-21315-76PL

Euro Profile Cylinder DeadLock Case (Commercial)



Standard2101-78PL2101-78SC

2101-78

5 Lever Dead Lock(Standard)

Group 2Mortice Locks Dead & Upright

Locks


2252-76

3 Lever Upright Lock(Standard) 40 Key Differs

Standard2252-76SS2252-76PL

2295-76

2 Lever Upright Lock(Standard) 20 Key Differs

22312-7615MMCH

15mm ForendFinish: Chrome

2277-78

Note:

Forend Finish:


CH - Chrome PlatedPL - BrassSS - Stainless Steel


Standard22312-7615MMCH

Standard

Keyed Alike

Master Keyed

Grand Master Keyed

2277-78PL2277-78SS

2277-78PLKA2277-78SSKA



3 Lever Upright Lock(Commercial) 100 Key Differs

2277-103

Standard

Keyed Alike

Master Keyed

Grand Master Keyed

2277-103PL2277-103SS

2277-103PLKA2277-103SSKA

2277-103PLMKD2277-103SSMKD

2277-103PLGMK2277-103SSGMK

3 Lever Upright Lock(Commercial) 36 Key Differs

2.5

L-21315-40

Narrow Stile Euro ProfileCylinder Dead Lock Case

StandardL-21315-40CHL-21315-40PL

21313-76

4 Lever Dead Lock(Standard)


L-2153-40

Narrow Stile OvalCylinder Dead Lock Case


2268-76

X-Lever Upright Lock(Standard) 150 Key Differs


2201-78

5 Lever Thief ResistantUpright LockInsurance Grade500 Key DiffersManufactured to BS872:1980

Standard2201-78PL2201-78SC

Group 2Mortice Locks Upright Locks


2226-78

Bathroom W/C UprightLock (Commercial)

No cylinder required

Standard2226-78PL2226-78SS

22314-76

Bathroom W/C UprightLock (Standard)*Handing must be specified

Standard22314L-76SS22314L-76PL22314R-76SS22314R-76PL

L-23316-76

Euro Profile CylinderUpright Lock Case withDrawback Latch


L-2209-78

Note:

Forend Finish:


PL - BrassSS - Stainless SteelSC - Satin Chrome

L-22315-76

Euro Profile CylinderUpright Lock Case(Standard)





Euro Profile CylinderUpright Lock Case(Commercial)47.65mm Centres


L-2241-78


Oval Cylinder Upright LockCase (Commercial)


L-2241-103




2.6

L-23803-85

Euro Profile CylinderUpright Lock Case(Commercial)


L-23803-85SSL-23803-85PL

L-2215-78SS/SL

Euro Profile Mortice SashLock with Silent Latch


L-2215-78SS/SL

22311-7615MMCH

2 Lever Lock only15mm ForendFinish: Chrome

22311-7615MMCH

Group 2Mortice Locks Upright Locks


Forend Finish:PL - BrassSS - Stainless Steel

2.7

22313-7615MMCH

4 Lever Lock only15mm ForendFinish: Chrome

22313-7615MMCH

2277-64

3 Lever Lock only

2277-64PL2277-64SS

L-223153-76

ESCO Euro Profile CylinderUpright Lock Case(Standard)


StandardL-223153-76SSL-223153-76BP

22313-76

ESCO 4 Lever Upright Lock(Standard) 48 Key Differs

Standard22313-76SS22313-76BP

22312-76



22311-76



Group 2Mortice Locks Emergency Exit

Locks & NightLatches


L-23318-76

Emergency Exit Night LatchCase with Anti-thrust Lock(Standard)*Handling must be specified


L-2349-78 L-2341-78

Oval Cylinder EmergencyExit Night Latch Case(Commercial)


Note:

Forend Finish:



StandardL-23318L-76SSL-23318L-76PLL-23318R-76SSL-23318R-76PL


Euro Profile Emergency ExitNight Latch Case(Commercial)



2.8

Group 2Mortice Locks Sliding Door Locks

& Mortice Latches


24313-76

Note:

Forend Finish:



4 Lever Claw Bolt SlidingDoor Lock (Standard)48 Key Differs


2457-78

3 Lever Claw Bolt SlidingDoor Lock (Commercial)36 Key DiffersStandard

Keyed Alike

2457-78PL2457-78SS

2457-78PLKA2457-78SSKA



Master Keyed

Grand Master Keyed

24314-76

Bathrooom W/C Claw BoltSliding Door Lock(Standard)

24314-76SS24314-76PL

24315-76

Euro Profile Claw BoltSliding Door Lock Case(Standard)

24315-76SS24315-76PL

Euro Profile Claw BoltSliding Door Lock Case(Commercial)

L-24315-76SSL-24315-76PL

26310-76

Mortice Latch(Standard)


2657-78

Mortice Latch(Commercial)


2.9

L-2441-78

Oval Cylinder Claw BoltSliding Door Lock Case(Commercial)

L-2441-78SSL-2441-78PL

L-24315-76

Group 2Mortice Locks Narrow Stile Locks


L-2241-65

Note:

Forend Finish:


PL - BrassSS - Stainless SteelCH - Chrome




24313-55

Narrow Stile Sliding Door 4Lever Wing Bolt Lock Case(Standard) 48 Key DiffersBackset: 39mmCase Depth: 55mm

Standard24313-55CH24313-55PLKeyed Alike24313-55CHKA24313-55PLKA

L-24315-55

Narrow Stile Sliding DoorEuro Profile Cylinder WingBolt Lock Case (Standard)Backset: 39mmCase Depth: 55mm


StandardL-24315-55CHL-24315-55PL

2.10

Group 2Mortice Locks Narrow Stile Hook

& Swing Bolt Locks


4241255NM

Note:

Forend Finish:


NM - Nickle Machined

Narrow Stile Euro ProfileCylinder Hook Bolt LockCaseBackset: 25mmCase Depth: 38mm

Cylinder separate seesection 9Backset measured from backto fore-end

Standard4241255NM

4241305NM

Narrow Stile Euro ProfileMortice Swinging HookBoltBackset: 30mmCase Depth: 43mm


Standard4241305NM

4211255NM

Narrow Stile Euro ProfileCylinder Dead Lock CaseBackset: 25mmCase Depth: 38mm


Standard4211255NM

4211305NM

Narrow Stile Euro ProfileCylinder Dead Lock CaseBackset: 30mmCase Depth: 43mm


Standard4211305NM

2.11

Group 2Mortice Locks Other Narrow Stile

& Mortice Locks


QR25X85MM-SS

Forend Finish:SS - Stainless SteelPB - Polished Brass

UNION Narrow Stile EuroProfile Cylinder UprightLock Case with SingleThrow Bolt and Roller LatchBackset: 25mmCase Depth: 40mm


StandardQR25X85MM-SS

QR35X85MM-SS

UNION Narrow Stile EuroProfile Cylinder UprightLock Case with SingleThrow Bolt and Roller LatchBackset: 35mmCase Depth: 50mm


StandardQR35X85MM-SS

QD25X85MM-SS

UNION Narrow Stile EuroProfile Cylinder DeadboltMortice LockBackset: 25mmCase Depth: 40mm


StandardQD25X85MM-SS

QD35X85MM-SS

UNION Narrow Stile EuroProfile Cylinder DeadboltMortice LockBackset: 35mmCase Depth: 50mm


StandardQD35X85MM-SS

Q25X85MM-SS

UNION Narrow Stile EuroProfile Cylinder Latch &Deadbolt Mortice LockBackset: 25mmCase Depth: 40mm


StandardQ25X85MM-SS

QR60X85MM

UNION Upright Lock CaseEuro Profile Cylinder withDouble Throw Dead Boltand Roller LatchBackset: 60mmCase Depth: 85mm


StandardQR60x85MM-SSQR60x85MM-PB

Q35X85MM-SS

UNION Narrow Stile EuroProfile Cylinder Latch &Deadbolt Mortice LockBackset: 35mmCase Depth: 50mm


StandardQ35X85MM-SS

Q60X85MM

UNION Upright Lock CaseEuro Profile Cylinder withDouble Throw Dead BoltMorice LockBackset: 60mmCase Depth: 85mm


StandardQ60x85MM-SSQ60x85MM-PB

2.12

Group 2Mortice Locks Conversion Sets


2700

Finishes:SS - Stainless SteelPL - BrassSC - Satin Chrome

2900

FOR MORTICE HORIZONTAL LOCKS Set

L-2041-152 Rebate Conversion Set for 3 Lever Horizontal Lock 2939PL2939SC

2077-152 Rebate Conversion Set for 3 Lever Horizontal Lock 2939PL2939SC

FOR MORTICE DEAD LOCKS Set

21311-76 Rebate Conversion Set for 2 Lever Dead Lock 2700PL2700SS

2157-78 Rebate Conversion Set for 3 Lever Dead Lock 2900PL2900SS

21313-76 Rebate Conversion Set for 4 Lever Dead Lock*Prefix ‘B’ denotes brass striker plate portion

2700PL2700SS

21314-76 Rebate Conversion Set for Bathroom W/C Dead Lock 2700PL2700SS

L-21315-76 Rebate Conversion Set for Euro Profile Cylinder Dead Lock 2700PL2700SS

L-2109-78 Rebate Conversion Set for Euro Profile Cylinder Dead Lock 2900PL2900SS

L-2141-78 Rebate Conversion Set for Oval Cylinder Dead Lock 2900PL2900SS

2.13



Finishes:SS - Stainless SteelPL - Brass

FOR MORTICE UPRIGHT LOCKS Set

22954-76 Rebate Conversion Set for 2 Lever Upright Lock 2700PL2700SS









22314-76 Rebate Conversion Set for Bathroom W/C Upright Lock 2700PL2700SS

2226-78 Rebate Conversion Set for Bathroom W/C Upright Lock 2900PL2900SS

L-22315-76 Rebate Conversion Set for Euro Profile Upright Lock 2700PL2700SS

L-22316-76 Rebate Conversion Set for Euro Profile Cylinder Lock Case withDrawback Latch

2700PL2700SS

L-2209-78 Rebate Conversion Set for Euro Profile Cylinder Upright Lock 2900PL2900SS

L-2241-78 Rebate Conversion Set for Oval Cylinder Upright Lock 2900PL2900SS

L-2241-103 Rebate Conversion Set for Oval Cylinder Upright Lock 2900PL2900SS

2700

2900

2.14



Finishes:SS - Stainless SteelPL - BrassBP - Brass Plated

FOR MORTICE UPRIGHT LOCKS Set


L-2215-78SS/SL Rebate Conversion Set for Euro Profile Mortice Sash Lock with SilentLatch

2915SC2915BP

FOR MORTICE EMERGENCY EXIT NIGHT LATCHES Set

L-2349-78 Rebate Conversion Set for Emergency Exit Profile Cylinder Night Latch 2942PL2942SC

L-2341-78 Rebate Conversion Set for Emergency Oval Cylinder Night Latch 2942PL2942SC

FOR MORTICE LATCHES Set

26310-76 Rebate Conversion Set for Latch 2700PL2700SC

L-2657-78 Rebate Conversion Set for Mortice Latch 2900PL2900SC

2700

2900

2.15

Group 2 Mortice Locks & Conversion SetsLocks & Night Latches Subject to exchange rate fluctuations....

Documents

Transcript of Group 2 Mortice Locks & Conversion SetsLocks & Night Latches Subject to exchange rate fluctuations....