Grilles Diffusers External Louvres Dampersairtherm.co.uk/.../Airtherm-Grilles-Louvre-booklet.pdf ·...
Transcript of Grilles Diffusers External Louvres Dampersairtherm.co.uk/.../Airtherm-Grilles-Louvre-booklet.pdf ·...
2013 product lineGrilles
Diffusers
External Louvres
Dampers
www.airtherm.co.uk
Grille & diffuser range
Single deflection and fixed blade grillesSeries SD & FB
Single deflection grilles have a single bank of fully adjustable bladesfor throw adjustment in one plane.
Fixed blade grilles have the blade pack fixed at either 0°, 15° or 45°.
Double deflection grillesSeries DD
Double deflection grilles add a second set of adjustable blades, set at90° to the first set. This allows throw adjustment in both planes,allowing greater throw adjustment than single deflection grilles.
Stock product
The following sizes are kept in stock for quick delivery.Satin anodised and RAL9010 available.
1502, 2002, 2502, 3002, 3502, 4002, 4502, 5002
200 x 150, 300 x 150, 300 x 200, 400 x 200
25mm flat (Opt)A Nominal + 30mmB 46mmC 90mmD 25mm
32mm bevelled (Std)A Nominal + 45mmB 46mmC 90mmD 32mm
25mm flat (Opt)A Nominal + 30mmB 46mmC 90mmD 25mm
32mm bevelled (Std)A Nominal + 45mmB 28mmC 72mmD 32mm
2
www.airtherm.co.uk
Egg crate grillesSeries ECG
The industry standard extract grille, egg crate grilles have a free areaof around 90%, meaning they can handle large air volumes withminimal pressure drops or noise generation.
30mm flat (Opt)A Nominal + 30mmB 28mmC 72mmD 30mm
37mm bevelled (Std)A Nominal + 45mmB 28mmC 70mmD 37mm
Stock product
The following sizes are kept in stock for quick delivery.RAL9010 finish, with and without opposed blade dampers.
1502, 2002, 2502, 3002, 3502, 4002, 4502, 5002, 5952 Overall face
Non vision grillesSeries NV
Designed to block line of sight from all angles (NV4 from most), nonvision grilles are used where privacy must be maintained, likebathrooms and doctors surgeries.
NV1
NV2Door
NV3Darkrooms
NV4Surfacemounted
3
www.airtherm.co.uk
Grille & diffuser range continued
Curved blade (eyelash) grillesSeries CB
Curved blade grilles have an unconventional appearance, and allowthrow adjustment thanks to the single bank of individually adjustableblades.
1, 2, 3 and 4 way blow set ups available.
Perforated plate grillesSeries PPG
Perforated plate grilles use a perforated steel core, to create a tamperresistant unit providing a stable downward throw, perfect forlaboratories, hospital operating theatres etc.
Deflector plates can be fitted behind the face to allow different blowpatterns to be created.
30mm flat flange (Opt)A Nominal + 30mmB 28mmC 72mmD 30mm
37mm bevelled (Std)A Nominal + 45mmB 28mmC 70mmD 37mm
25mm flat (Opt)A Nominal + 30mmB 46mmC 90mmD 25mm
32mm bevelled (Std)A Nominal + 45mmB 28mmC 72mmD 32mm
4
www.airtherm.co.uk
° ° °
°
Linear bar grillesSeries LG
An extremely versatile grille series. Blade profiles include 0° with 3mmor 6mm tops, 15° and 45°, all of which can be set on a 12.5mm or20mm blade pitch.
Other options like removable and hinged cores are also available.
If required a reinforced linear bar grille can be offered, for use in floorsor walls where impact resistance is required.
31mm flat flange (Opt)A Nominal + 30mmB 33mmC 76mmD 31mmE Actual neck + 15mm
36mm bevelled (Std)A Nominal + 45mmB 33mmC 76mmD 36mmE Actual neck + 9mm
Computer room floor grilles - BS Heavy GradeSeries CFLG
Designed to suit raised access flooring systems, computer room floorgrilles have been tested to BS EN 13264:2001.
Manufactured from extruded aluminium throughout, the grilles havesupreme strength, yet are lightweight enough to allow one man to liftand fit comfortably.
Stock product
600mm2 units are kept in stock for quick delivery.
5
www.airtherm.co.uk
Grille & diffuser range continued
Fixed blade swirl diffusersSeries FSW
Fixed blade swirl diffusers are extremely effective diffusion units. Theycreate a downward throw of swirling air which rapidly pulls insurrounding air, mixing the supplied and resident air very effectively.
Adjustable blade swirl diffusersSeries SWA
Just like their fixed counterparts, adjustable swirls are extemelyeffective diffusion units.
Instead of pressed blades fixed at an angle, these have individuallyadjustable, matt black deflector blades set behind the face. Thisallows clockwise, anti-clockwise or straight down throws to be created.
SWF A (mm) B (mm) C (mm) D (mm)1 595 254 80 402 595 356 100 403 595 457 160 404 595 533 200 40
Stock product
The following sizes are kept in stock for quick delivery,RAL9010 finish.
254mm, 356mm, 457mm, 533mm (Core sizes)
SWA A (mm) B (mm) C (mm)1 595 537 240
Dimensions explained on fixed swirl diagram.
Dimension B describes diameter between outermost points ofdeflector blades. Not a small spigot as with fixed swirls.
6
Stock product
Adjustable blade swirl diffusers are kept in stock for quick delivery,RAL9010 finish.
www.airtherm.co.uk
Ceiling diffusersSeries CD
A consistently popular product, ceiling diffusers are found in almostevery commercial building.
Made from extruded aluminium throughout, ceiling diffusers areguaranteed to be rattle free, unlike some cheaper pressed models.
All sizes under 1200mm x 1200mm have a spring-loaded removablecore as standard.
Drum jet diffusersSeries DJS
Providing an exceptionally long throw, drum jet diffusers are supplyunits capable of handling large air volumes whilst also givingmaximum control over throw direction.
Stock product
All sizes shown in the table are kept in stock for quick delivery, in bothRAL9010 and satin anodised finish.
Size Nominal (mm) Overall (mm)Depth Depth
c/w OBDDepth c/w
OBD & VEDW H W HA 244
164
297
208 62 106 194B 321 373C 473 525D 625 678E 524
259
576
303 100 144 232F 651 703G 778 830H 905 957
Stock product
The following sizes of four way blow ceiling diffuser are kept in stock forquick delivery.
RAL9010 finish, with and without opposed blade dampers.
1502, 2002, 2252, 3002, 3752, 5952 Overall face
7
www.airtherm.co.uk
Grille & diffuser range continued
Linear slot diffusersSeries LSD
Commonly seen in commercial installations, runs of unlimited lengthscan be created using multiple linear slot diffusers.
When used for supply, matt black internal deflectors can be specifiedenabling throw adjustment. End caps and pressure equalising gridscan also be specified.
Slot boxes to suit can also be supplied.
Linear ceiling diffusersSeries LCD
Much like linear bar grilles in construction, linear ceiling diffusers use alarger 45° blade set at a 20mm pitch. This creates a large free area forhigh air volumes, whilst also having the blade surface to deflect aireffectively.
Available in one or two way blow models, with two ways having anequal or unequal split.
32mm bevelled (Opt)A Nominal + 45mmB 46mmC 91mmD 25mm
25mm flat flange (Std)A Nominal + 30mmB 46mmC 91mmD 32mm
Slot number Overall face(mm)
Actualneck (mm)
1 76 402 115 783 154 1174 193 1555 232 1936 271 2327 310 2708 349 309
8
www.airtherm.co.uk
Perforated plate diffusersSeries PPD
Using the same outer frame as standard louvre faced ceiling diffusers,perforated plate diffusers are tamper resistant, and create a stablethrow creating areas of clean supplied air.
This is in contrast to other units like ceiling diffusers which aredesigned to mix supplied and resident air as quickly as possible.
Small format circular diffusersSeries SFCDA
Normally found in arenas, exhibition centres etc, circular diffusers aresuitable for use in large open plan areas requiring high changeoverrates.
SIZE DIMENSIONS (mm)A B C
150 257 149 225200 307 199 275250 357 249 325300 407 299 375350 457 349 425
9
www.airtherm.co.uk
Intumescent fire blocks
Fire rated for 1 hour, intumescent fire blocks expand quickly whenexposed to flames to create a barrier through which fire and smokecannot pass.
The intumescent material is covered with a smooth finish to helpprevent dust build up and aiding cleaning.
Grille & diffuser range continued
Pressed steel grilles, diffusers and registers
A cost effective type of grille, normally used in domestic warm airheating systems. Can also be used in fire doors in conjunction withintumescent fire blocks or slimline fire dampers.
Pressed steel ceiling diffuserNo.28 Type B
Incorporates a cord operated damperPressed steel floor diffuser
Incorporates a roller operated damper
Pressed steel grilleNo damper Pressed steel register
Incorporates a lever operated damper
10
www.airtherm.co.uk
Pressed steel floor diffuser
Pressed steel register
11
Curved access doorsSeries ADC
Galvanised steel with blue plastic handles. Rubber seal between innerand outer parts seals the duct once the door is tightened.
Single blade dampersSeries SBD
A cost effective volume control damper for use in small diameterductwork where a full shut off is not required.
Fitted with a locking quadrant for simple operation.
Body length 170mm on all sizes.
Stock product
The following sizes are kept in stock for quick delivery.
100mm, 125mm, 150mm, 200mm, 250mm, 300mm, 315mm.
Stock product
The following sizes are kept in stock for quick delivery.
Size To suit duct diameter
180mm x 80mnm 100mm / 125mm
250mm x 150mm 150mm / 160mm
250mm x 150mm 180mm / 200mm
250mm x 150mm 250mm250mm x 150mm 300mm / 315mm
250mm x 150mm 350mm / 355mm
250mm x 150mm 400mm / 500mm
400mm x 300mm 400mm
400mm x 300mm 450mm
400mm x 300mm 500mm
400mm x 300mm 560mm
400mm x 300mm 630mm
400mm x 300mm 710mm
www.airtherm.co.uk12
Grille & diffuser range
Grille & diffuser options
Polyester powder coating
The majority of grilles and diffusers shown in the catalogue can bepolyester powder coated to any RAL or BS colour.
Some products cannot be powder coated due to plastic parts etc.Please see the table.
Nylon coating
A specialist finish, nylon coating is used in favour of polyester coatingwhere extreme durability or resistance to static electricity build up isneeded.
These qualities mean computer room floor grilles are often nyloncoated, as static electricity build-ups in data centres can bedisasterous.
Opposed blade dampers
Fitted to the rear of many grilles and diffusers, opposed bladedampers are used to trim the airflow through the terminal.
Suitable for use in supply or extract situations.
Please see the table for which products can be fitted with OBDs.
Plenum boxesSeries PB
Although not a grille or diffuser, plenum boxes are just as integral inthe majority of ventilation systems.
Fire rated plenum boxes are available.
Grille/Diffuser type PPC OBD NotesSingle deflection
Fixed blade
Double deflection
Egg crateNon vision
Curved blade
Perforated plate
Linear bar
Computer room floor
Pressed steel grille xPressed steel register x x Includes damper
Pressed steel diffuser x x Includes damper
Ceiling diffuser
Drum jet
Linear slot
Linear ceiling
Circular diffuser x Includes butterfly damper
Fixed swirl xAdjustable swirl x x RAL9010 only
www.airtherm.co.uk 13
Aluminium dampers
Volume control damperSeries VCD
A large format, all aluminium damper, HVC VCDs can be made inlarger sizes than their steel counterparts.
Using a protected push rod linkage means these dampers requireminimal torque to operate, even at large sizes.
Back draught shutter / Non return damperSeries BDS
Designed to permit airflow in one direction only, back draught shuttersare fully aluminium for excellent durability.
Blades can be linked and weighted if required to enable the damper toopen only once the required pressure has been reached.
www.airtherm.co.uk
External louvre range
Standard single bank louvresSeries WL
38mm, 50mm and 75mm pitch single bank louvres.
Single bank of blades provide good protection against rain ingress,whilst preserving 50% free area for high airflow.
Flanged, reversed frame, recessed frame and concealed (not on 38pitch) units available. Bird and insect mesh optional.
Stainless steel & galvanised louvresSeries WLSS & WLG
Bespoke made to order, stainless and galvanised louvres can bemade to replicate a regular format or custom made to your owndimensions.
Grades of stainless available are 430, 316 and 304.
Stock product
The following sizes of 38mm pitch standard louvre are kept instock for quick delivery.
Mill finish, powder coating to RAL/BS colour optional.
1502, 2002, 2502, 3002, 3502, 4002, 4502,5002, 5502, 6002, 7002, 8002, 9002, 10002
WL38
WL50
WL75
WL100
14
www.airtherm.co.uk
Acoustic louvresSeries AL
Using a two part hollow aluminium blade forming a cavity which isthen filled with mineral wool, acoustic louvres prevent noise transferwithout impeding airflow.
Available in 150mm, 300mm (standard) and 600mm deep models.
Sand trap louvresSeries STL
Designed to be the first stage of filtration, sand trap louvres catch andcollect airbourne particles like sand and grit which would otherwiseclog up finer filters inside the ventilation system.
Constructed from two banks of interlocking vertical channels, allstraight paths through the unit are eliminated. Any caught materialthen falls onto the slanted cill and is ejected through the front of thelouvre.
15
BSRIA testing to BS EN 13181:2001
Tested by BSRIA to BS EN 13181:2001, sand trap louvres have beenproven over 90% effective at 0.5m/s wind velocity, and over 60%effective at 1 m/s wind velocity.
www.airtherm.co.uk
External louvre range
High performance louvres - Class ASeries HPL
With the addition of two banks of vertical channels behind a standardlouvre, high performance louvres have been tested to confirmed togive Class A levels of rain protection at velocities up to 0.5m/s.
The channels prevent any straight path through the unit, catching anyrain or spray which made it past the louvre blades. This caught waterthen falls onto a special slanted drip cill which quickly ejects it throughthe louvre face.
Penthouse louvresSeries PHL
Commonly used in natural ventilation systems, penthouse louvres areperfect for high efficiency installations, like the new generation ofschool buildings and hospitals.
Class A Penthouse Louvres can be manufactured using the sameblade arrangement as high performance louvres shown above.
Options include:
� Doors.
� Internal dividers (insulated or un-insulated).
� Flat, single slant, double slant and HIP roofs.
16
www.airtherm.co.uk
External louvre options
Polyester powder coating
All louvres shown in the catalogue can be polyester powder coated toany RAL or BS colour.
Nylon coating
A specialist finish, nylon coating is used in favour of polyester coatingwhere extreme durability or resistance to static electricity build up isneeded.
Fixing methods
Although normally drilled on site, louvres can be supplied with facefixing holes in the flange, or rear mounted fixing lugs.
Bird mesh
Screwed to the back of louvre blades, bird mesh prevents largeobjects like leaves, rubbish and birds being able to penetrate thelouvre.
Bird mesh has no real effect on airflow.
Insect mesh
With much smaller gaps than bird mesh, insect mesh prevents all butthe smallest objects penetrating the louvre. The vast majority ofinsects and debris are caught.
Insect mesh will reduce a louvre’s free area.
17
www.airtherm.co.uk
Steel dampers
S100 Fire Dampers
S100 Fire Dampers are standard fusible link operated curtain type firedampers.
Spring driven to enable installation in vertical or horizontal alignments,S100 dampers are available with HEVAC, plasterboard or curtainframes and can be fitted with fixing lugs to suit drop rod installa
18
Certification
S100 Fire Dampers have been tested to and passed:
BS1366-2 (ISO10294-1): 4 Hour fire test at 300 Pa.Test conducted by Building Research Establishment.
BS476-20: 6 Hour fire test.Test conducted by Warrington FRC.
Fire damper cases are manufactured in accordance with DW144.
Options
Installation frames: HEVAC Plasterboard Curtain Fixing lugs
Material: Fully galvanised Stainless blade pack & galvanised case Fully stainless Stainless available in 430, 316 and 304 grades.
Connection types: Square spigotted Circular spigotted Flat oval spigotted
S200 & S300 Fire Dampers
S200 fire dampers are designed to be fitted inside ductwork and assuch have no spigot. Spring driven they can be installed vertically orhorizontally.
S300 fire dampers are designed for use in fire doors as an alternativeto intumescent dampers. Exceptionally slim at 38mm deep, they aregravity driven and so must be installed vertically with the blade pack atthe top.
Certification: S200
S200 Fire Dampers have been tested to and passed:
BS1366-2 (ISO10294-1): 4 Hour fire test at 300 Pa.Test conducted by Building Research Establishment.
BS476-20: 6 Hour fire test.Test conducted by Warrington FRC.
Certification: S300
S300 Fire Dampers have been tested to and passed:
BS476-20: 6 Hour fire test.Test conducted by Warrington FRC.
Options
Material: Fully galvanised Stainless blade pack & galvanised case Fully stainless Stainless available in 430, 316 and 304 grades.
Connection types: Square flanged
www.airtherm.co.uk 19
S600 Fire Smoke Dampers
S600 Fire Smoke Dampers are as much a life safety device as a wayto protect buildings. Having an opposed blade construction and fittedwith actuators, they can be remote operated upon detection of smokeor fire anywhere in a building.
We can supply and fit the full range of Belimo Fire Smoke Damperactuators to S600 dampers.
Certification
S600 Fire Smoke Dampers have been tested to and passed:
BS476-20: 6 Hour fire test.Test conducted by Warrington FRC.
Fire damper cases are manufactured in accordance with DW142.
Options
Installation frames: HEVAC Plasterboard Curtain Fixing lugs
Material: Fully galvanised Stainless blade pack & galvanised case Fully stainless Stainless available in 430, 316 and 304 grades.
Connection types: Square spigotted Circular spigotted Flat oval spigotted
S900 Volume Control Dampers
S900 Volume Control Dampers are a general purpose unit, best suitedto sizes under 1m2. Manufactured from roll formed galvanised orstainless steel and with a fully protected gear drive mechanism, S900VCDs are extremely durable and require minimal maintenance.
We can supply and fit the full range of Belimo actuators to your newS900 Volume Control Dampers.
Options
Material: Fully galvanised Stainless blades & galvanised case Aluminium blades and galvanised case Fully stainless Stainless available in 430, 316 and 304 grades.
Connection types: Square flanged Square spigotted Circular spigotted Flat oval spigotted
www.airtherm.co.uk
Plastic dampers for natural ventilation
20
uPVC volume control damper showing total seal
Extruded uPVC frame and blades.
Integrated flexible plastic blade nose seals.
Brush side seals.
Rolled steel section inside each blade forreinforcement (not exposed to airstream).
Stainless steel screws to join frame (not exposed toairstream).
White.
Minimum size 300mm x 300mm / 300mm Ø.
Maximum size 1000mm x 1000mm / 1000mm Ø.
Above these sizes units would be made in sections.
Precision linkage
Manufactured from highlycorrosion resistant materials, thecustom designed gearset is so
precise it can drive up to 10blades and cogs with very limitedplay, for maximum performance
even at large sizes.
Corrosion resistance
In coastal or swimming poolapplications, traditional steel
dampers will corrode veryquickly. uPVC on the other handhas excellent resistance to saltand chlorine, and cannot rust.
Overview
Ultra high shut offExcellent corrosion resistance
The revolutionary uPVC Volume control damperincorporates a copyrighted and never before seenfeature for a plastic volume damper. It’s unprecedentedperformance originates with the unique ‘EccentricAerofoil’© blade design. This unieu, incorporates ablade with an off centre axis.
This enables the edge seal to be complete, anduninterrupted by blade axles. Combine this with theintegrated, specially designed blade nose seal whichfuses the blades together on closure, a performanceemulating that of a full shut off damper is achieved,whilst still providing the excellent functionality of atraditional volume control damper.
Specifications:
Materials:
Finish:
Sizes:
www.airtherm.co.uk 21
Model B - Square, spigotted.Model C - Circular, spigotted.Model D - Flat oval, spigotted.
Model A - Square, no spigot.
Ultra high shut off
In independent tests, large format uPVC volume control dampersyielded leakage results normally only achieved by dedicated shut offdampers.
The VCD sent for testing had a nominal size of 1000mm x806mm, the large size tantamount to our confidence in the damper.
With even 10Pa rarely being exceeded in natural ventilationsituations, it is clear how uPVC volume control dampers canenhance the efficiency of your new natural ventilation system.
No cold bridge
Close a steel or aluminium volume control damper, and you willgo on losing heat, not through airflow but conduction of heat fromone side to the other.
HVC large format uPVC volume control dampers have atheoretical U value of 0.973W/m2K when closed, atleast 40 timesbetter than a steel damper and 250 times better than an aluminiumunit.
Of course this can help to cut heating bills, and reduces thecarbon footprint of any building using them.
*Figures sourced from www.engineeringtoolbox.com
Leakage (1000mm x 806mm uPVC VCD)
m3/s m3/hr/m m3/hr/m2
10Pa 0 0 0
25Pa 0.000857 0.29 3.83
50Pa 0.002850 0.97 12.73
75Pa 0.004975 1.69 22.22
100Pa 0.005398 1.83 24.11
150Pa 0.007909 2.68 35.33
Thermal conductivity of steel andaluminium*
Steel AluminiumW/mK 40 250
Btu 23.12 144.46
� Flues & chimneys
� Natural ventilation & lighting
� Kitchen ventilation
� Air Conditioning
� Heat pumps & renewables
� Solar photovoltaic
www.airtherm.co.uk
T: 0844 809 2509
F: 01562 887312
M: 07715 360958
Unit 8aGainsborough Trading Estate
Rufford RoadStourbridge
West MidlandsDY9 7ND