Grey Lay Bot Automates the successful Lay pro 88 horse racing system into Greyhound Racing The Laying software bot for lazy and busy punters who love lay pro 88 method and want to use it in greyhound racing Michael & Steve 4/1/2020

Thanks for purchasing the Grey Lay Bot.

If you have subscribed to Auto profit Soccer/ APS Deluxe/ SAW Deluxe/ Magic Soccer

Bot/Laypro88 in past, then you can go through this manual very quickly. Let’s start the deep dive

into the Grey Lay Bot.

Once your open the bot, complete the registration process and click on desktop icon, then you

will see the below screen, where you have to input your betfair id and password,

On next screen, which is mandatory betfair requirement, Click OK

You will see the following screen.

As you can see, you can run up to three different laying strategies with Laypro88 Greyhound Bot.

You can select countries you want to bet for each lay.

For example : Lay 1 – you can bet only on Australia and NZ, Lay 2 – you can only bet on UK &

Ireland etc.

Market to bet: You can select the market which you want to bet on- Place market or Win market.

We won’t recommend place market for Greyhound betting as it has very poor

liquidity for automated betting.

Selection: - You can select the favorite you want to bet on among the first eight favorites. We

recommend to bet on first three favorites (1st , 2nd and 3rd favorite) only due

to liquidity issues from 4th favorite On.

Min price and Max price is the price range which user can select for the selected favorite to be

qualified for betting

Time to bet:

Select Pre-Play and 25 seconds in Time to bet settings. So, all matches to be checked for

qualification starting 25 seconds before the official start of the match. Don’t keep less than 25

seconds as there are times, when the betfair closes dogs market at 25 seconds before the official

start.

Minimum amount matched: Amount of minimum money should be matched in the correct score

market for bot to make a qualified selection. In order to avoid low liquidity matches, atleast keep

$2000 (AUD) or more as per your equalivant currency.

Runners: Minimum and Maximum number of horses you want in the qualifying race.

Stop@profit @ - Yes or No: Input the profit value you want and select Yes/No if you want bot to

continue once profit is reached.

Starting Stake: Input the stake you want to place the first bet.

Number of recovery cycles: Hope you have understood the laypro88 staking as explained in the

manual, please input the recovery cycle # here.

Select the minimum gap between your selection and any other favorite and input the value. Say,

if you have selected 3rd favorite which you want to bet on (as per Laypro88), then in the

dropdown, you will get option to select first favoriteor 2nd favorite to select.

If you want to bet on 4th favorite, then you will get option to select 1st, 2nd or 3rd favorite. It is

not required as per Laypro88 system but we have given user more options to use with the bot.

Select Laypro88 staking if you want to use Laypro88 (recommended) or use Level staking.

Stop Loss– is the value once passed then the tab will either stop betting or restart the sequence

of betting.

Most important part of the settings: -

Only one of the above stop loss settings will be in control:-

1. Stop Loss @ Liability each tab (recommended to be used).

2. Stop Loss @ Staking each tab. This looks at the staking amount to bet. (Original Staking).

Stop Loss @ Liability for each tab – is the value once passed then the tab will enter stop betting

or restart the sequence of the betting.

The settings shown above, is how you set it if you want the bot to check the liability before it

places the bet ( recommended) , this means the bot will look at the tab target, and the price

and then calculate how much needs to be bet. Then check to make sure that the risk (Liability)

is not higher than the limit, in this case , we have 10 as the limit.

If the liability is going to be over 10.0, then it will revert back to the default target, and abandon

the recovery of the tab.

Please keep in mind, bot will pass the stop loss figure , as it will place a bet, if the loss is below the

stop loss , so remember, a 50 stop loss could actually be much higher. Once the stop loss has been

passed, it will either stop or restart ( if option is ticked)

Example : If stop loss is set at 50, and the tab has a loss of say 48.00, the bot will still try and recover

that 48 as it is under 50, so if the odds are say 2.0, then it will bet around 50 to recover the 48 loss plus

the target. Meaning you will be at 98 should the bet lose. That is when the tab would stop trying to

recover the loss.

Here you can see two buttons – Continue with restart and Don’t cont

Once the stop loss has been hit for any tab, then you would have option on not to continue

betting or start a new cycle.

Please remember when you select continue with restart button; you will get above pop up

which needs to be clicked OK. This is mandatory betfair requirement.

In Laypro88 Greyhound Bot, you have 5 tabs which are ready to take bets if they are enabled.

Please use the number of tabs as advised in the settings.

Above is the view of one of the tabs, I will discuss details in tab view later.

User can select the type of races he wants to bet on. It is only available for UK and Australian

dog races

User can select which trap boxes he wants to bet into. We have provided upto ten traps to

cover special dog races as well.

Mexican wave : - This is very important that it is ticked. This instruction makes sure that the

betting is allocated to each enabled tab, and then starts again. If unticked it will bet first

available tab and not rotate with all available tabs, and it is not the best option.

Start button: - Once the settings are set by the user, press the start button in order to start the

bot.

Stop button: - press the stop button to stop the bot.

Log out: - press the log out button and you will come out of the bot.

Clear button

when you start betting next day, the bot will start from the same cycle where you left it

previous day unless you use a clear button and want to start fresh. If you want to continue the

same cycle, don’t use the clear button and just press the start button and let it run every day.

There are respective clear buttons for each tab as well.

There is one box which you will see at the middle center of the interface.

It will show at what time the user pressed the clear button for the particular tab. The profit/loss

for tabs will be shown accordingly from the time the clear button was last clicked.

As soon as you press the clear button, the bot will erase all staking sequence , profit/loss etc

and will start fresh.

When you click on software manual, you would have got access to this manual only.

Commission: - user input betfair commission.

API requests/sec – It shows you the number of API Calls per second being requested from

betfair. As long as it is below 10, you are within the betfair limit and no data charges will be

charged to your account. We have designed all our bots in such a way, that it should remain

under 10.

Auto reload: This button (if checked) will keep on loading the soccer markets for the day every

2nd hour. If you want to keep the bot running on your desktop/laptop or VPS, please keep it

checked.

Please keep auto reload checked all the time.

In results tab, you can see all consolidated results for each tab. Cumulative profit is shown at

the top

With the export button, you can download all results in .csv file.

Have a look on tab view

Very important to keep the tabs enabled, otherwise bot will not take any bet in that tab, if it is

not enabled.

Log tab: - it will give you view of what the bot is doing second by second.

This is very important feature in all of our bots. Now, the user can see what the bot is doing

second by second. You may not be able to understand everything what is in the log but it is

helpful in order to investigate any error.

You can access the detailed log file at the following address:-

C:\Program Files (x86)\Profit Sports Betting\LayPro88 Greyhound Bot\log_files

If you are our existing user of SAW Deluxe or APS Deluxe, then I am sure you will find Laypro88

Greyhound Bot very comfortable to use. But if you are new to our bots, I strongly recommend

you to go through and read APS manual or SAW Deluxe and the user vidoes, so you get end to

end view on functioning of our bots.

APS Deluxe manual

http://winningmore.com/manual.htm

SAW Deluxe manual

http://www.stopatawinnerbot.com/StopataWinnerbot_Deluxe_Manualv1.0.pdf

Thanks as always for your support

Cheers

Michael & Steve

www.winningmore.com

www.profitsportsbetting.com

GIFT THIS EBOOK ON SECRETS OF GREATEST

PUNTERS TO YOUR FAMILY & FRIENDS... PASS THE

BELOW LINK... INSPIRE THEM

CHECK OUT OUR AMAZING AUTOMATED BETTING BOTS

http://www.winningmore.com/betfairsoftwares/