greenlee wire

MADE FOR THE TRADE!™

Contents

If you need to cut, crimp or strip, Greenlee has the tool – from manual-style to battery-powered. Use our

cable cutter selection guide and cross-reference charts to choose the right high-quality, hand-

held tool that makes your job faster and easier time after time, cut after cut, crimp

after crimp.

Wire & Cable Termination

CCX 178

Copper&AluminumCutting 181

ACSR,GuyStrand&SteelCutting 190

Communications&UndergroundPowerCableCutting 194

Die-TypeCrimping 197

DielessCrimping 206

CrimpingDies 210

Accessories 213

CrimpingDieCrossReference 215

CableBendingTools 219

Wire&CableStrippingTools 220

WireCrimpingTools 221

WireFerrules 226

WireFerruleCrimpingTools 229

MADE FOR THE TRADE!™W

ire &

Cab

le T

erm

inat

ion

178

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

What Is CCX?

Feature Legend of Icons

The Greenlee CCX three-step, 10-second function changeover. The easy, quick-release design makes changeovers this simple:

1

2

3

CCX

Just push the release buttons, and the blades slide right out of the easy- opening CCX head.

Alternate die adapters, cutter blades, or knockout punch adapters slide right in!

You’re working again, with no lost time!

CCX–Exclusive Multipurpose Tools from GreenleeGet more for your money and carry fewer tools – with CCX. This advanced line of multipurpose tools is designed to work with a wide variety of cutting blades and crimping die adapters, and a knockout punch adapter. Buy just one tool for countless electrical construction and maintenance jobs.

Cut• Copper, aluminum, copperweld, and ACSR cable• Guy strand, including EHS• Threaded rod• DIN rail

Crimp – 6-Ton Option• Greenlee K22 & KA22 • Thomas & Betts 6Ton• Burndy W • Blackburn OD• Kearney O • Panduit CD2001

• For copper lugs and splices, use Greenlee dies up to 600 kcmil (MCM). For aluminum lugs & splices, use Greenlee dies up to 350 kcmil (MCM).*

Crimp – 12-Ton Option• Greenlee KC12 & KA12 • Thomas & Betts 15500 Series• Burndy U • Blackburn B & H• Penn-Union T • Panduit CD-920• ILSCO ILD • Huskie HT41

Punch – use the knockout punch adapter with• Standard Slug-Buster and Slug-Splitter punches• Non-round punches

�*UL�and�cUL�classified�to�600�kcmil�(MCM)�with�Anderson,�Blackburn®,�Burndy,�ILSCO,�Panduit,�Thomas�&�Betts,�and�Penn-Union�copper�color-coded�connectors.�UL�&�CUL�classified�to�350�kcmil�(MCM)�with�Anderson,�Blackburn®,�Burndy,�ILSCO,�Panduit,�Thomas�&�Betts,�and�Penn-Union�aluminum�color-coded�connectors.

E12CCXL & ECCXL Tool Capacities

CriMPinG CuTTinG PunChinG

Copper Color-Coded Lugs and Splices: 750 kcmil Copper and Aluminum Cable: 1-1/2" (40 mm) Round: 5-5/8" (144.1 mm) in 10 ga. mild steel Aluminum Color-Coded Lugs and Splices: 750 kcmil ACSR: 954 kcmil (Cardinal) Rectangular: 2.677" x 5.433" (68.0 mm x 138.0) mm 5/8" Service Entrance Connectors: 10-1/0 AWG Standard Guy Strand: 5/8" (20 mm) Square: 5.4333" x 5.433" (138.0 mm x 138.0) mm .840 Service Entrance Connectors: 1/0-4/0 AWG EHS Guy Strand: 1/2" (13 mm) Accessories required to punch 4-1/2" through 5-5/8" Aluminum Overhead “H” taps: 6 AWG-500 kcmil Ground Rod: 1/2" (13 mm) 12185 Spacer, 04686 Bushing and 03170 Sleeve One Piece ACSR Tension Splices: 4 AWG-556.5 kcmil Rebar (schedule 60): 1/2" (13 mm) Two Piece ACSR Tension Splices: 2 AWG-556.5 kcmil Threaded Rod: 1/4", 3/8", 1/2", 4 mm, 5 mm,

6 mm, 8 mm, 10 mm DIN Rail: 35 x 7.5, 32 x 15 x 9, 35 x 15

18V Lithium-Ion Battery

Automatic Retraction

Stop

Retraction Stop Repeat

LED Work Light

Battery LED Monitor

Crimping Force in

TONS

Crimping Tool that does not

require die set

DIELESS

IntelliCRIMP™ Technology

www.greenlee.comW

ire & Cable Termination

179

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL

= new producT = Replacement paRt = accessoRy

Gator® CCXL Tools

Features• Intelligent Crimping System Technology includes a pressure sensor that

monitors the crimping force of each crimp and provides the operator a visual and audible alert if the force is below specifications.

• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles per charge and faster cycle times.

• Retraction Stop Repeat (RSR) allows the operator to partially retract the ram and then the tool repeats the retraction for subsequent crimps.

• LED light provides the operator with the battery charge and tool maintenance status.

• Two-stage hydraulic system provides fast advance and power speeds, saving time.

• Forward handle position improves tool balance.• One trigger controls all tool functions.• Crimping head rotates 350°• Tools automatically retract when the crimping or cutting cycle is complete• Overmolded tacky grip areas make gripping the tool easier and more

comfortable.• LED work light illuminates dark work areas.• Greenlee battery-powered crimping tools now use bio-degradable oil.• Smart chargers control the charging current, charging voltage and battery

temperature to maximize battery life• Available with 120V, 12V or 230V battery charger or with 120V or 230V

corded adapter in place of batteries and charger• Use optional CCX blades and adapters (see page 180• U.S. Patent #6,206,663, #6,532,790

CaT. nO. uPC nO. dEsCriPTiOn

E12CCXL11 52037 12-Ton Battery-Powered 12CCX tool, w/120V chargerE12CCXL12 52038 12-Ton Battery-Powered 12CCX tool, w/12V chargerE12CCXL22 52039 12-Ton Battery-Powered 12CCX tool, w/230V chargerE12CCXL120 12856 CCX 12-Ton Tool w/120V AC AdapterE12CCXL230 12857 CCX 12-Ton Tool w/230V AC AdapterECCXL11 52040 6-Ton Battery-Powered CCX tool, w/120V chargerECCXL12 52041 6-Ton Battery-Powered CCX tool, w/12V chargerECCXL22 10134 6-Ton Battery-Powered CCX tool, w/230V chargerECCXL120 10139 CCX 6-Ton Tool w/120V AC AdapterECCXL230 10140 CCX 6-Ton Tool w/230V AC Adapter12274 12274 Carrying Strap52176 52176 18 V, 3.0 Ah, Li-ion Battery10122 10122 Carrying Case for E12CCXL & ECCXL52178 52178 120V Charger52179 52179 12V Charger52180 52180 230V Charger

sPECiFiCaTiOns E12CCXL ECCXL

Crimping Force 24,000 lb. (107 kN) 12-Ton

12,000 lb (53 kN) 6-Ton

Length 16-1/2" (419 mm) 16-1/2" (375 mm)Weight 15 lbs. (6.8 kg) 14 lbs. (6.3 kg)Battery 18 V, 3.0 Ah, Li-ion 18 V, 3.0 Ah, Li-ionBattery Charge Time

1 hour 1 hour

Est. Cycles Per Charge

90 300

See�page�180�for�crimping�die�adapters,�cutting�blades�and�knockout�punch�adapter�

6-Ton tools When used with Greenlee KC22 and KA22 dies in combination with Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union® and Thomas & Betts® color-coded connectors, connections up to 600 kcmil (copper) and 350 kcmil (aluminum) are UL and cUL classified. These tools also accept Greenlee, Burndy®, Kearney®, Blackburn®, Panduit® and Thomas & Betts® dies used for 6-ton tools. They can drive knockout punches up through 2" diameter.

12-Ton tools When used with Greenlee KC12 and KA12 dies in combination with Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union® and Thomas & Betts® color-coded connectors, crimps on connections up to 750 kcmil are UL and cUL classified. The tools also accept all industry “U” type dies. These tools drive knockout punches through 5-5/8" diameter.

Crimping�dies�on�page�210-212.

E12CCXL

ECCXL


ire &

Cab

le T

erm

inat

ion

180

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

CCX Tool Accessories (optional, all in pairs except punch driver)

CaT. nO. uPC nO. dEsCriPTiOn ECCXL E12CCX

UA22 07062 Adapter for Greenlee K22 dies ✓

UAK 07033 Adapter for Kearney “0”, T&B “6 Ton”, and Blackburn “OD” dies

✓

UAW 07035 Adapter for Burndy “W” and Panduit “CD-2001” dies (equivalent to “D3” die)

✓

UA12T 20158 Adapter for “U” dies (included with tool) ✓


UC26 06714 Cutter Blades AL & CU 1" capacity ✓ ✓UC40 07036 Cutter Blades AL & CU 1-1/2" capacity ✓ ✓

UCACSR 07037 Cutter blades for ACSR & guy strand ✓ ✓


UCUNC14 07038 Cutter blades for 1/4" threaded rod ✓ ✓UCUNC38 07039 Cutter blades for 3/8" threaded rod ✓ ✓UCUNC12 07274 Cutter blades for 1/2" threaded rod ✓ ✓


UA12P 11890 Punch Driver Adapter* (accepts 3/4" draw stud)

✓ ✓

*U.S. Patent #6,065,326

diE adaPTErs

CaBLE CuTTinG BLadEs

ThrEadEd rOd CuTTinG BLadEs

knOCkOuT PunCh adaPTEr

UA22

UAK

UC40

UCUNC38

UA12P

www.greenlee.comW


181

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


Selection Guide for Copper & Aluminum Cable Cutters

CaBLE sizE

250 300 350 400 500 600 750 1000 1500 2000 aWG #8 #6 #4 #2 #1 1/0 2/0 3/0 4/0 kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil Page mm2 6 10 16 25 35 40 50 70 95 120 150 150 185 240 300 400 500 800 1000 no.

BaTTEry-POWErEd

E12CCXL,

al • • • • • • • • • • • • • • • • •

ECCXL Cu • • • • • • • • • • • • • • • • • 179

aCsr • • • • • • • • • • • • • • • • •

Es32L

al • • • • • • • • • • • • • • 182

Cu • • • • • • • • • • • • • •

Es1000

al • • • • • • • • • • • • • • • • • 183

Cu • • • • • • • • • • • • • • • • •

Es750

al • • • • • • • • • • • • • • • • • 183

Cu • • • • • • • • • • • • • • • •

EsG50L

al • • • • • • • • • • • • • • • • • • • 184

Cu • • • • • • • • • • • • • • • • • • •

EsC85L, al • • • • • • • • • • • • • • • • • • • 194

EsC105 Cu • • • • • • • • • • • • • • • • • • •

hydrauLiC

750

al • • • • • • • • • • • • • • • • • 184

Cu • • • • • • • • • • • • • • • • •

raTChET

759

al • • • • • • • • • • • • • • • o 186

Cu • • • • • • • • • • • • • o

760, 761 al • • • • • • • • • • • • • • • • •

185/186 Cu • • • • • • • • • • • • • o o • o 45206, al • • • • • • • • • • • • • • o

186 45206i Cu • • • • • • • • • • • • • • o 45207, al • • • • • • • • • • • • • • • • o

186 45207i Cu • • • • • • • • • • • • • • • o

773 al • • • • • • • • • • • • • • • •

185

Cu • • • • • • • • • • • • o o

774 al • • • • • • • • • • • • • • • •

185 Cu • • • • • • • • • • • • • • o o

756 al • • • • • • • • • • • • • • • • • o

185

Cu • • • • • • • • • • • • • • • • • o

ManuaL

727,727M

al • • • • • • • 188

Cu • • • • • o o

718, 718F al • • • • • • • • • • • •

Cu • • • • • • • • • o o o 187

718hL

al • • • • • • • • • • • • • • 187

Cu • • • • • • • • • • • • o o

704 al • • • • • • • • • • • • o o

187 Cu • • • • • • • • • • o o

705 al • • • • • • • • • • • • • • • • o

187 Cu • • • • • • • • • • • • o o

706 al • • • • • • • • • • • • • • • • o

187 Cu • • • • • • • • • • • • • • o o

COPPER AND ALUMINUM CUTTING

Note:��•�=��Frequent�use�capacity��o�=�maximum�capacity


ire &

Cab

le T

erm

inat

ion

182

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles per charge and faster cycle times.• LED light provides the operator with the battery charge and tool maintenance status.• Small size makes the ES32L an excellent tool for use inside panel boxes.• In line tool style is light weight and very easy to control• One trigger controls all tool functions.• Cutting head rotates 350°• Tools automatically retract when the cutting cycle is complete• Overmolded tacky grip areas make gripping the tool easier and more comfortable.• LED work light illuminates dark work areas.• Greenlee battery-powered crimping tools now use bio-degradable oil.• Smart chargers control the charging current, charging voltage and battery temperature to maximize battery life• Available with 120V, 12V or 230V battery charger or with 120V or 230V corded adapter in place of batteries and charger

• Designed specifically for cutting fine stranded copper cable• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles per charge and faster cycle times.• LED light provides the operator with the battery charge and tool maintenance status.• In line tool style is light weight and very easy to control• One trigger controls all tool functions.• Cutting head rotates 350°• Tools automatically retract when the cutting cycle is complete• Overmolded tacky grip areas make gripping the tool easier and more comfortable.• LED work light illuminates dark work areas.• Greenlee battery-powered crimping tools now use bio-degradable oil.• Smart chargers control the charging current, charging voltage and battery temperature to maximize battery life• Available with 120V, 12V or 230V battery charger or with 120V or 230V corded adapter in place of batteries and charger

Gator® ES32L Battery-Powered Cable Cutter

Gator® ES32FL Battery-Powered Fine Stranded Copper Cable Cutter


ES32L11 52107 ES32L Battery-Powered Cable Cutter w/120 volt ChargerES32L12 52108 ES32L Battery-Powered Cable Cutter w/12 volt ChargerES32L22 52116 ES32L Battery-Powered Cable Cutter w/230 volt ChargerES32L120 52117 ES32L Cable Cutter w/120V AC AdapterES32L230 52118 ES32L Cable Cutter w/ 230V AC Adapter12092 12092 Movable Blade12093 12093 Fixed Blade52177 52177 18V 1.5 Ah Li-ion25752 25752 Carrying Case52178 52178 120V Charger52179 52179 12V Charger52180 52180 230V Charger

sPECiFiCaTiOns

Capacity 500 kcmil (240 mm2) Cu or Al cableBattery Voltage 18V 1.5 Ah Li-ionLength 14-5/8" (372 mm)Weight 4.4 lbs. (2.0 kg)Battery Charge Time 30 minutesEst. Cycles Per Charge 200 (500kcmil cable requires 2 cycles per cut)

sPECiFiCaTiOns

Capacity 1-1/4" (32 mm) fine stranded Copper cable(Not for cutting standard stranded cables)

Battery Voltage 18V 1.5 Ah Li-ionLength 14-5/8" (372 mm)Weight 4.4 lbs. (2.0 kg)Battery Charge Time Approximately 30 minutesEst. Cycles Per Charge 200 (500kcmil cable requires 2 cycles per cut)


ES32FL11 19219 ES32FL Battery-Powered Cable Cutter w/120 V ChargerES32FL12 19220 ES32FL Battery-Powered Cable Cutter w/12 V ChargerES32FL22 19221 ES32FL Battery-Powered Cable Cutter w/230 V ChargerES32FL120 19222 ES32FL Battery-Powered Cable Cutter w/120 V ChargerES32FL230 19223 ES32FL Battery-Powered Cable Cutter w/230 V Charger19234 19234 Blade Kit52177 52177 18V 1.5 Ah Li-ion25752 25752 Carrying Case52178 52178 120V Charger52179 52179 12V Charger52180 52180 230V Charger

www.greenlee.comW


183

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


• Compact design permits use in tight locations.• One hand operation.• Extra heavy blades for clean cuts and long life.• Performs approximately 35 cuts in 1000 kcmil copper cable

per battery charge.• Large 2 1/8" diameter blade opening.• Easy to switch between forward and reverse direction.• 14.4 volt battery recharges in one hour.• Includes two batteries, battery charger, and molded carrying case.• Choice of 120 volt or 230 volt battery charger.

sPECiFiCaTiOns

Capacity Copper 1000 kcmilAluminum 1000 kcmil

Blade Opening 2-1/8" (54mm)Length 14-3/4" (375mm)Weight 7.3 lb. (3.3 kg)Battery 14.4 Volt, NiCd

Gator® ES1000 Battery-Powered Cable Cutter


ES100011 50013 Battery-powered Cable Cutter, 120 V ChargerES100022 50015 Battery-powered Cable Cutter, 230 V Charger45378 11851 14.4 V NiCd Battery50017 50017 Blade Set11856 11856 Carrying Case11841 11841 120V Charger11856 11856 230V Charger

Gator® ES750 Battery-Powered Cable Cutter


ES750-11 45380 Battery-Powered Cable Cutter, 120 V ChargerES750-22 45381 Battery-Powered Cable Cutter, 230 V Charger45378 45378 Extra 12 Volt NiCd Battery45334 45334 Movable Blade45333 45333 Fixed Blade45383 45383 Carrying Case45379 45379 120V Charger45382 45382 230V ChargersPECiFiCaTiOns

Cutting Capacity 750 kcmil (MCM) (400 mm²) copper cable 1000 kcmil (MCM) (500 mm²) aluminum cable

Length 14-1/4" (362 mm)Weight 5.8 lbs. (2.6 kg)Battery 12 Volts NiCd

• Cuts 500 kcmil (MCM) copper cable in under 8 seconds.• Compact design permits use in tight locations.• Extra-heavy blades for clean cuts and long life.• Makes approximately 20 cuts in 750 kcmil (MCM) per battery charge.• Easy to switch between forward and reverse direction.• 12 volt battery recharges in one hour.• Includes battery charger, one battery and molded carrying case.• Not for use on 500 kcmil or larger compact cable.• Choice of a 120 volt or 230 volt battery charger.


ire &

Cab

le T

erm

inat

ion

184

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

Gator® Battery-Powered Cable Cutter• The ESG50L is used for cutting copper and aluminum power cables.• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles per charge and faster cycle times.• Retraction Stop allows the operator to stop the ram retraction at any point simply by tapping the trigger, and then starting the next cutting cycle from that point saving time and energy.• LED light provides the operator with the battery charge and tool maintenance status.• Two-stage hydraulic system provides fast advance and power speeds, saving time.• Forward handle position improves tool balance.• One trigger controls all tool functions.• Cutting head rotaates 350°• Tools automatically retract when the cutting cycle is complete• Overmolded tacky grip areas make gripping the tool easier and more comfortable.• LED work light illuminates dark work areas.• Greenlee battery-powered cutting tools now use bio-degradable oil.• Smart chargers control the charging current, charging voltage and battery temperature to maximize battery life• Available with 120V, 12V or 230V battery charger or with 120V or 230V corded adapter in place of batteries and charger• U.S. Patents #6,206,663 and #6,065,326


ESG50L11 52129 Battery-Powered Cable Cutter, 120 V chargerESG50L12 52130 Battery-Powered Cable Cutter, 12 V chargerESG50L22 52131 Battery-Powered Cable Cutter, 230 V chargerESG50L120 52132 Cable Cutter w/120V AC AdapterESG50L230 52133 Cable Cutter w/230V AC Adapter04181 04181 Movable Blade04184 04184 Fixed Blade52176 52176 18 V, 3.0 Ah, Li-ion Battery10118 10118 Carrying Case for ESG50L12274 12274 Carrying Strap52178 52178 120V Charger52179 52179 12V Charger52180 52180 230V Charger

sPECiFiCaTiOns bAttEry PowErEd

Cutting Capacity 2" (50 mm) diameter Al or Cu cableLength 15-3/4" (400 mm)Weight 9.8 lbs. (4.4 kg)height 13" (330 mm)Battery 18 V, 3.0 Ah, Li-ionBattery Charge Time 1 hourEst. Cycles Per Charge 300

Hydraulic Cable Cutter

750H767 model with767 Hand Pump

sPECiFiCaTiOns

Capacity 1000 kcmil (MCM) (500 mm²) copper or aluminum cableJaw opening 1-15/16" (49 mm)Weight 750 – 25 lbs. (11.3 kg)

750H767 - 29 lbs. (13.2 kg) 750E975 - 84 lbs. (38.1 kg)


750 29149 Hydraulic Cable Cutter & Ram in Storage Box*750H767 17450 Hydraulic Cable Cutter with 767 Hand Pump, Ram,

Hydraulic Hose in Storage Box750E975 34203 Hydraulic Cable Cutter with 975 Electric Pump, Ram,

Hydraulic Hose in Storage Box751 22279 Hydraulic Cable Cutter Head for use with Greenlee 746

Hydraulic Ram. Also order 51385 Elbow746C 17451 Ram Unit23955 23955 Steel Storage Box17459 17459 Cutter Blade

• Cuts in 7 seconds. Jaws slide open quickly to save time between cuts.• 11-ton (97 kN) ram powers cutting jaws. Jaws are specially hardened

and precision-ground to hold sharpness.• Lightweight and easy to use.

*�1/4"�Male�hydraulic�coupler�(54169)�is�needed�to�connect�a�767�pump�with�hose�to�the�750�cutter

www.greenlee.comW


185

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


Heavy-Duty Ratchet Cable Cutters

sPECiFiCaTiOns Copper aluminumMaximum Capacity 1500 kcmil (MCM) (800 mm2) 1500 kcmil (MCM) (800 mm2)Frequent use Capacity 1000 kcmil (MCM) (500 mm2) 1000 kcmil (MCM) (500 mm2)Length 27-1/2" (698 mm) long Jaw opening 2" (51 mm)Weight 11.41 lbs. (5.17 kg)

� � � �

• Extra thick blades, ground flat to reduce potential for breakage.• Ratchet action for heavy-duty cutting.• Two cutting actions – fast scissor cutting for small cable and insulation;

converts automatically to ratchet mode.• Anti-slip mechanism for positive ratchet action.• Rubber boot protects ratchet mechanism.


756 34081 Heavy-Duty Ratchet Cable Cutter with rubber boot.34188 34188 Cutter Head Unit (Includes 2 Blades)

• Two-speed mechanism saves cutting time by closing the blades rapidly and shifting to normal speed to perform the cut.

• No more pushing on stubborn release buttons–the blades open automatically when the cut is complete.

• Completely new ratchet mechanism improves durability. • Narrow profile permits use in deep boxes, against walls or on floors. • Durable, lightweight fiberglass handles. • U.S. Patent #6,766,581

Two-Hand Ratchet Cable Cutter

• Two-handed operation provides more leverage and makes cutting large cables easier.

• Short fiberglass handles make it easy to use in tight places and to store in tool boxes.

• Single-speed ratchet mechanism.• Blade release allows blades to be opened in mid-cut.• Heavy-duty forged steel blades provide long life.


761 11761 Two-Hand Ratchet Cable Cutter11768 11768 Movable Blade (761)

High Performance Ratchet Cable Cutters


773 01876 High Performance Ratchet Cable Cutter, 15-1/2"774 01878 High Performance Ratchet Cable Cutter 19-1/8"11256 11256 Movable & Fixed Blades (773 & 774)

sPECiFiCaTiOns Copper aluminum Communications Cable Cutting Capacity* 1000 kcmil (MCM) (500 mm2) 1000 kcmil (MCM) (500 mm2) 1-1/8" dia. (28 mm2) Length 10-3/4" (273 mm) Weight 3.6 lbs. (1.6 kg)

761

sPECiFiCaTiOns Copper aluminum Communications Cable773 Maximum Capacity* 500 kcmil (MCM) (240 mm2) 795 kcmil (MCM) (400 mm2) 1-3/16" dia. Frequent use Capacity* 350 kcmil (MCM) (150 mm2) 750 kcmil (MCM) (400 mm2) Length 15-1/2" (394 mm);

Weight 5.3 lbs. (2.4 kg) 774 Maximum Capacity* 750 kcmil (MCM) (400 mm2) 795 kcmil (MCM) (400 mm2) 1-3/16" dia. Frequent use Capacity* 500 kcmil (MCM) (240 mm2) 750 kcmil (MCM) (400 mm2) Length 19-1/8" (486 mm) Weight 5.8 lbs. (2.6 kg)

773

774


ire &

Cab

le T

erm

inat

ion

186

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

• Simple, one-hand operation.• Compact – convenient for working in tight places and stores easily

in tool pouches.• Single-speed ratchet mechanism.• Blade release allows blades to be opened in mid-cut.• Heavy-duty blades provide long life.

Compact Ratchet Cable Cutters


759 45277 Compact Ratchet Cable Cutter760 17600 Compact Ratchet Cable Cutter45282 45282 Movable Blade (759)45281 45281 Fixed Blade (759)09908 09908 Movable Blade (760)09907 09907 Fixed Blade (760)45297 45297 Handle Spring

sPECiFiCaTiOns Copper aluminum Communications Cable

759 Maximum Capacity* 500 kcmil (MCM) (240 mm2) 750 kcmil (MCM) (400 mm2) 1-1/8" dia. (28 mm2) Frequent use Capacity* 400 kcmil (MCM) (185 mm2) 600 kcmil (MCM) (300 mm2) Length 10-1/2" (262 mm) Weight 1.4 lbs. (0.6 kg)

760 Maximum Capacity* 1000 kcmil (MCM) (500 mm2) 1000 kcmil (MCM) (500 mm2) 1-3/4" dia. (42 mm2) Frequent use Capacity* 750 kcmil (MCM) (400 mm2) 1000 kcmil (MCM) (500 mm2) Length 11-3/4" (298 mm) Weight 1.75 lbs. (0.8 kg)

*Capacity�may�be�less�for�compact�and�compressed�cables

759

760

Ratchet Cable Cutters• Simple, one-hand operation• Exclusive two-speed ratcheting mechanism adjusts for light/heavy cutting• Well-suited for tight working spaces• Blades can be opened mid-cycle• Available with cushioned handles or with 1000V insulated cushioned handles

sPECiFiCaTiOns Copper aluminum Communications Cable 45206 & 45206I Maximum Capacity* 600 kcmil (MCM) (300 mm2) 600 kcmil (MCM) (300 mm2) 1-3/8" (35 mm) dia. Frequent use Capacity* 500 kcmil (MCM) (240 mm2) 500 kcmil (MCM) (240 mm2) Length 10" (254 mm)

Jaw opening 1-7/16" (36.5 mm)

45207 & 45207i Maximum Capacity* 750 kcmil (MCM) (400 mm2) 1000 kcmil (MCM) (500 mm2) 2" (51 mm) dia. Frequent use Capacity* 600 kcmil (MCM) (300 mm2) 750 kcmil (MCM) (400 mm2) Length 11" (279 mm)

Jaw opening 2" (51 mm)

45206


45206 45206 Ratchet Cable Cutter (1.5 lbs/.7 kg)45206I 12680 Ratchet Cable Cutter with Insulated Handles (1.5 lbs/.7 kg)45207 45207 Rachet Cable Cutter (2.4 lbs/1.1 kg)45207I 12681 Rachet Cable Cutter with Insulated Handles (2.4 lbs/1.1 kg)45218 45218 Movable Blade (45206 & 45206I)45212 45212 Fixed Blade and Handle (45206)12526 12526 Fixed Blade and Handle (45206I)45211 45211 Movable Blade (45207 & 45207I)45228 45228 Fixed Blade and Handle (45207)05883 05883 Fixed Blade and Handle (45207I)

45207I

www.greenlee.comW


187

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


Heavy-Duty Cable Cutters718F, 704, 705 and 706• Strong, lightweight fiberglass handles.• Adjustable pivot bolt provides for blade adjustment.704, 705 and 706• Replaceable, forged, heat-treated, and precision ground blades.• Made in USA.


718F 10507 Heavy-Duty Cable Cutter, 17-1/2"704 24564 Heavy-Duty Cable Cutter, 21"705 05923 Heavy-Duty Cable Cutter, 25-1/2"706 22291 Heavy-Duty Cable Cutter, 31-1/2"24565 24565 704 Cutter Unit (Includes 2 Blades)24567 24567 704 Handle Unit (Includes Handle, Sleeve, Grip)05930 05930 705 Handle Unit (Includes Handle, Sleeve, Grip)06555 06555 705 & 706 Cutter Unit (Includes 2 Blades)22296 22296 706 Handle Unit (Includes Handle, Sleeve, Grip)

sPECiFiCaTiOns

CaPaCiTiEs* 718F 704 705 706

CopperMaximum use 350 kcmil (MCM) (150 mm2) 350 kcmil (MCM) (150 mm2) 500 kcmil (MCM) (240 mm2) 750 kcmil (MCM) (400 mm2)

Frequent use 4/0 AWG (95) 250 kcmil (MCM) (120 mm2) 350 kcmil (MCM) (150 mm2) 500 kcmil (MCM) (240 mm2)

aluminumMaximum use 500 kcmil (MCM) (240 mm2) 1000 kcmil (MCM) (500 mm2) 1000 kcmil (MCM) (500 mm2)

Frequent use 350 kcmil (MCM) (150 mm2) 350 kcmil (MCM) (150 mm2) 750 kcmil (MCM) (400 mm2) 750 kcmil (MCM) (400 mm2)

Communications CableMaximum use 1" (25 mm) dia. 1-1/4" (32 mm) dia. 1-3/4" (44 mm) dia. 1-1/2" (38 mm) dia.

Frequent use

Length 17-1/2" (444 mm) 21" (533 mm) 25-1/2" (648 mm) 31-1/2" (800 mm)

Weight 2.8 lbs. (1.3 kg) 3.01 lbs. (1.37 kg) 5.5 lbs. (2.5 kg) 6.2 lbs. (2.8 kg)*Capacity�may�be�less�for�compact�and�compressed�cables

706

704

705

718F

718 Cable Cutter

718HL Cable Cutter


718 30208 Cable Cutter


718HL 12847 Cable Cutter

• Economical, lightweight, fits easily into tool boxes.• Heat-treated, precision ground, shear action blades.• Steel handles with rubber grips for leverage.• Made in USA.

• Unique “double joint” reduces handle effort required by 25% and increases cutting capacity to 500 kcmil• Fits into tool boxes• Heat-treated, precision ground, shear action blades• Strong steel handles with molded grips for good leverage• Patent Pending

sPECiFiCaTiOnsCapacity Copper aluminumMaximum Capacity* 350 kcmil (MCM) (150mm2)Frequent use Capacity* 4/0 (95 mm2) 350 kcmil (MCM) (150 mm2)Length 18" (457 mm) Weight 2.78 lbs. (1.3 kg)

sPECiFiCaTiOnsCapacity Copper aluminumMaximum Capacity* 500 kcmil 500 kcmilFrequent use Capacity* 350 kcmil 500 kcmilLength 18" (457 mm) Weight 3.25 lbs. (1.5 kg)




ire &

Cab

le T

erm

inat

ion

188

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

ETS12L Battery-Powered Bolt Cutter

Cutting CapacityCommon Bolt 1/2" diameterGrade 5 Bolt 7/16" diameter

Grade 8 Bolt 5/16" diameter

Threaded Rod 1/2" diameterOne-Time Disposable Lock

4 AWG Alumoweld

Boa Lock BL-9Grade 40 Rebar 3/8" diameterSteel Rod 3/8" diameter (1/2" diameter using two cycles)Ground Rod 3/8" diameter (1/2" diameter using two cycles)Copper and Aluminum Cable

2/0 AWG

ACSR 3/0 AWG Pigeon (4/0 AWG Pigeon using two cycles)Guy Strand 5/16" diameter (3/8" diameter using two cycles)EHS Guy Strand 5/16" diameter

Aircraft Cable 1/4" diameter

sPECiFiCaTiOns

Length 13-5/8" (365 mm)Weight 4.4 lbs. (2.0 kg)Battery 18V 1.5 Ah Li-ionBattery Charge Time 30 MinutesEst. Cycles per Charge 200

Cable Cutter• Easily cuts heavier copper and aluminum cables up to 2/0 (70 mm²).• Precision-ground, shear-action, curved cutting blades.• 727 has PVC-covered, high-leverage handles for easier cuts.• 727M has cushion grip, high-leverage handles for added comfort.• Heat-treated for long life.• Made of heavy-duty forged steel.• Rust-resistant black oxide finish.


727 31291 Cable Cutter727M 12629 Cable Cutter with Molded Grip

sPECiFiCaTiOns FOr 727 and 727MCapacity Copper aluminum Communications CableMaximum Capacity 2/0 (70 mm2)Frequent use Capacity #1 AWG (35 mm2) 2/0 (70 mm2) 100 pairLength 9-1/4" (235 mm) Weight 1 lb. (.45 kg)

727

727M

• Designed to cut one-time disposable locks, shipping container seals and small diameter bolts.• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles per charge and faster cycle times.• LED light provides the operator with the battery charge and tool maintenance status.• In line tool style is light weight and very easy to control• One trigger controls all tool functions.• Cutting head rotates 350°• Tools automatically retract when the cutting cycle is complete• Overmolded tacky grip areas make gripping the tool easier and more comfortable.• LED work light illuminates dark work areas.• Greenlee battery-powered crimping tools now use bio-degradable oil.• Smart chargers control the charging current, charging voltage and battery temperature to maximize battery life• Available with 120V, 12V or 230V battery charger or with 120V or 230V corded adapter in place of batteries and charger


ETS12L11 52134 Battery Bolt & Lock Cutter-120 Volt ChargerETS12L12 52135 Battery Bolt & Lock Cutter-12 Volt ChargerETS12L22 52136 Battery Bolt & Lock Cutter-220 Volt chargerETS12L120 52137 Bolt & Lock Cutter w/120V AC AdapterETS12L230 52138 Bolt & Lock Cutter w/230V AC Adapter25752 25752 Carrying Case52177 52177 18V 1.5 Ah Li-ion Battery56288 56288 Cutter Blade Kit52178 52178 120V Charger52179 52179 12V Charger52180 52180 230V Charger

www.greenlee.comW


189

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


Gator® ETS8L Cable Tray Cutter


ETS8L11 52139 Battery Cable Tray Cutter w/120V chargerETS8L12 52140 Battery Cable Tray Cutter w/12V chargerETS8L22 52141 Battery Cable Tray Cutter w/230V chargerETS8L120 52142 Cable Tray Cutter w/120V AC AdapterETS8L230 52143 Cable Tray Cutter w/230V AC Adapter52177 52177 18V 1.5 Ah Li-ion Battery25752 25752 Carrying Case19987 19987 Blade Set52178 52178 120V Charger52179 52179 12V Charger52180 52180 230V Charger

sPECiFiCaTiOns

Weight 3.3 LBS. (1.5 KG)Length 12-1/8" (308mm)Battery 18V 1.5 Ah Li-ionBattery Charge Time 30 MinutesEst. Cycles per Charge 400

CuTTinG CaPaCiTiEs

MaTEriaLDiameter

1/16" 1/8" 3/16" 1/4" 5/16"Cable Tray (Mild�steel,�Zinc�Plated) ✓ ✓ ✓ ✓ ✓

Cable Tray (Stainless�Steel) ✓ ✓ ✓ ✓

Threaded rods ✓ ✓ ✓ ✓ ✓

Threaded rods, stainless steel ✓ ✓ ✓ ✓ ✓

steel Bolts (Grade�2) ✓ ✓ ✓ ✓ ✓

steel Bolts (Grade�8) ✓ ✓ ✓

• Cuts basket style cable tray wires in 2 seconds.• Makes flush cuts.• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles per charge and faster cycle times.• LED light provides the operator with the battery charge and tool maintenance status.• In line tool style is light weight and very easy to control• One trigger controls all tool functions.• Cutting head rotates 350°• Tools automatically retract when the cutting cycle is complete• Overmolded tacky grip areas make gripping the tool easier and more comfortable.• LED work light illuminates dark work areas.• Greenlee battery-powered crimping tools now use bio-degradable oil.• Smart chargers control the charging current, charging voltage and battery temperature to maximize battery life• Available with 120V, 12V or 230V battery charger or with 120V or 230V corded adapter in place of batteries and charger


ire &

Cab

le T

erm

inat

ion

190

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

• Cuts ACSR type cables through 636 kcmil (except Egret).• One-hand operation permits operator to control the cable with a free hand.• Capable of making approximately 50 cuts of Grosbeak or 120 cuts

of Merlin per battery charge.• Blades are specially contoured and hardened to cut both aluminum

and steel strands.• Operator can switch between reverse and forward direction

with one finger.• Powerful 14.4 volt battery charges in less than one hour.• Includes two batteries, battery charger, and molded carrying case.• Choice of 120 volt or 230 volt battery charger.


ES2511 35369 Battery ACSR Cutter, 120 V ChargerES2522 22132 Battery ACSR Cutter, 230 V Charger76807 76807 Blade Kit11851 11851 14.4 V NiCd Battery11845 11845 Carrying Case11841 11841 120V Charger11856 11856 230V Charger

sPECiFiCaTiOns

Capacity ACSR 636 kcmil (except Egret)Aluminum 1500 kcmil

Length 14-3/4" (375mm)Weight 7.7 lb. (3.5 kg)Battery 14.4 Volt, NiCdBattery Charge Time 1 Hour

ES25 Battery-Powered ACSR Cutter

aCsr

std. Guy strand

Ehs Guy strand

Ground rod

rebar (schedule 60)

Page #

BaTTEry-POWErEd

EsG45L 1590.0 kcmil 5/8" (16 mm) dia. 1/2" 5/8" (16 mm) dia. 1/2" (13 mm) dia. 191

Es25 636 kcmil (except Egret) 190

hydrauLiC-TyPE

hk520 336.4 kcmil 1/2" (13 mm) dia. 1/2"(13 mm) dia. 7/16" (11 mm) 191

raTChET-TyPE

776 636.0 kcmil* 192757 954.0 kcmil 1/2" (13 mm) dia. 192758 1/2" (13 mm) dia. 1/2" (13 mm) dia. 1/2" (13 mm) dia. 192

ManuaL

749 2/0 AWG 193

CuTTEr diEs

00949 477.0 kcmil 5/8" (16 mm) dia. 5/8" (16 mm) dia. 5/8" (16 mm) dia 5/8" (16 mm) dia 193

kd6-27 4/0 AWG 193

Selection Guide for ACSR, Guy Strand & Steel Cutters

ACSR, GUY STRAND & STEEL CUTTING

*�For�core�diameters�less�than�0.32"

www.greenlee.comW


191

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


Hydraulic ACSR Cable Cutter

• Hydraulic cutter takes the effort out of cutting tough cables.• Flip-open head provides strength while making it easy to cut long lengths.• Head rotates 180°.• Thumb release lever for quick blade retraction.


HK520 08031 Hydraulic ACSR Cable Cutter00336 00336 Cutter Blade00301 00301 Fixed Cutter Head

sPECiFiCaTiOns

Capacity ACSR: 336.4 kcmil (MCM) Standard Guy Wire, Ground Rod: 1/2" (13 mm) Soft Steel Bolts: 11/16" (17 mm) Wire Rope: 3/4" (19 mm) Rebar: 7/16" dia. (Schedule 60)

Length 14.5" (368 mm)Weight 5.7 lbs. (2.6 kg)

Gator® Battery-Powered ACSR & Guy Wire Cutters

• Designed specifically to cut ACSR, guy strand and ground rods.• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles per charge and faster cycle times.• Retraction Stop allows the operator to stop the ram retraction at any point simply by tapping the trigger, and then starting the next cutting cycle from that point saving time and energy.• LED light provides the operator with the battery charge and tool maintenance status.• Two-stage hydraulic system provides fast advance and power speeds, saving time.• Forward handle position improves tool balance.• One trigger controls all tool functions.• Cutting head rotates 350°• Tools automatically retract when the cutting cycle is complete• Overmolded tacky grip areas make gripping the tool easier and more comfortable.• LED work light illuminates dark work areas.• Greenlee battery-powered cutting tools now use bio-degradable oil.• Smart chargers control the charging current, charging voltage and battery temperature to maximize battery life• Available with 120V, 12V or 230V battery charger or with 120V or 230V corded adapter in place of batteries and charger• U.S. Patents #6,206,663 and #6,065,326


ESG45L11 52124 Battery-Powered ACSR Cable Cutter, 120 V charger



ESG45L120 52127 Cable Cutter w/120V AC AdapterESG45L230 52128 Cable Cutter w/230V AC AdapterESG45ESI 10398 Movable BladeESG45EF 10397 Fixed Blade52176 52176 18V 3.0 Ah Li-ion Battery10118 10118 Carrying Case for ESG45L12274 12274 Carrying Strap52178 52178 120V Charger52179 52179 12V Charger52180 52180 230V Charger

sPECiFiCaTiOns

CapacityACSR: 1590 kcmil (MCM), (Falcon 54/19)Standard Guy Strand: 5/8" diameter (16 mm diameter)

EHS Guy Strand: 1/2" diameter (13 mm diameter)Ground Rod: 5/8" diameter (16 mm diameter)Rebar (schedule 60): 1/2" diameter (13 mm diameter)

Wire Rope: 5/8" diameter (16 mm diameter)Copper and Aluminum Cable:

1500 kcmil (MCM) (800 mm2)

Soft Steel Bolts: 5/8" diameter (16 mm diameter)

Length 16-5/8" (423 mm)height 13" (330 mm)Weight 13 lbs. (5.9 kg)Battery 18V 3.0 Ah Li-ion

Battery Charge Time 1 hour

Est. Cycles per Charge 90


ire &

Cab

le T

erm

inat

ion

192

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

EHS Guy Wire Cutter

• Cuts 1/2" Extra High Strength (EHS) and standard guy wire.• Cuts 1/2" (12.7 mm) mild steel rods and bolts.• Has two cutting actions – single-motion cutting for small cable,

ratchet action for heavy-duty cutting.• Anti-slip mechanism for positive ratchet action.


758 01274 Heavy-Duty Ratchet Guy Wire Cutter03548 03548 Cutter Head Unit (Includes Blades, Blade

Holder, Insert and Hardware)

sPECiFiCaTiOns

Capacity 1/2" EHS and standard Guy Wire, 1/2" Mild Steel Rods and BoltsLength 27-3/4" (704 mm)Weight 10 lbs. 12 oz. (4.8 kg)

• Extra-thick blades, ground flat to reduce potential for breakage.• Ratchet action for increased cutting power.• Two cutting actions – fast scissor cutting for small cable; converts

automatically to ratchet mode.• Anti-slip mechanism for positive ratchet action.• Rubber boot protects ratchet mechanism.

High Performance Ratchet ACSR Cable Cutter

• Two-speed mechanism saves cutting time by closing the blades rapidly and shifting to normal speed to perform the cut.

• Patented mechanism opens the blades automatically when the cut is complete. (U.S. Patent #6,766,581)

• Completely new ratchet mechanism provides excellent durability.• Short length fits easily into truck bins.• Durable, lightweight fiberglass handles.


776 02826 High Performance ACSR Cable Cutter11397 11397 Movable & Fixed Blade Set

sPECiFiCaTiOns

Capacity Cuts ACSR through 636 kcmil with steel core diameters less than 0.32" All 336.4 and Smaller ACSR plus: 397.5 - Brant, Chickadee, Ibis 477.0 - Pelican, Flicker, Hawk 556.5 - Osprey, Parakeet 605.0 - Peacock 636.0 - Kingbird, Swift, Rook

Length 20" (508 mm)Weight 6.2 lb. (2.8 kg)

Ratchet ACSR Cable Cutter

Specifically cuts:


757 34084 Ratchet ACSR Cable Cutter34187 34187 Cutter Head Unit (Includes 2 Blades)

sPECiFiCaTiOns

Capacity 954 kcmil (MCM) ACSR, 1/2" (12.7 mm) soft steel rodLength 29-1/4" (743 mm)Jaw opening 1.18" (30 mm)Weight 12.22 lbs. (5.54 kg)

www.greenlee.comW


193

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


Guy Wire Cutter Dies• Works with any crimping tool that accepts 12-ton “U” type dies.• Less costly than dedicated cutting tools.• Simple to install in crimping tools.• Requires no adjustments for cutting different materials.• Will cleanly cut guy wire (including EHS), grade 60 rebar, ground rod,

soft steel bolts up to 5/8" (16 mm) and up to 477 kcmil (MCM) (240 mm2) ACSR.

• U.S. Patent Number 5,775,158.


00949 00949 Cutting dies for 12-ton “U” die typecrimping tools

sPECiFiCaTiOns

Capacity Guy Wire: 5/8" (16 mm) dia. Ground Rod: 5/8" (16 mm) dia.EHS Guy Wire: 5/8" (16 mm) dia. Soft Steel Bolts: 5/8" (16 mm) dia.Rebar (grade 60): 5/8" (16 mm) dia. ACSR: 477 kcmil (MCM) (240 mm²)

KD6-27 Cutter Dies

• “W” style dies for cutting ACSR• Now, with improved steel and heat treatment for better durability• Can be used with any crimping tool that accepts “W” dies. Including:

Greenlee K425O, K425BG, EK622L, ECCXL (with UAW adapters), and EK628L (with CJD3 jaws).

• Similar to Burndy W-28K.

sPECiFiCaTiOns

Capacity 4/0 ACSR


KD6-27 10182 “W” Style Cutting Dies for ACSR

ACSR Cable Cutter

• Precision-machined, forged steel blades.• Cuts ACSR service entrance cable.• Steel handles with rubber hand grips.


749 32913 ACSR Cable Cutter04663 04663 Bolt & Nut Set

sPECiFiCaTiOns

Capacity ACSR Cable: 2/0, 7/16" (11.1 mm) Piano Wire: 1/8" (3.2 mm) Copper/Aluminum Cable: 350 kcmil (mcm) (150 mm²)

Length 28" (711 mm)Weight 5.66 lbs. (2.6 kg)

sPECiFiCaTiOns

Capacity Soft Wire Rope: 1/4" (6 mm) dia. Aircraft Cable: 3/16" (5 mm) dia. Hard Steel Wire: 3/16" (5 mm) dia. Copper/Aluminum Cable: 15/64" (6 mm) dia.

Length 7 7/8" (200 mm)Weight .75 lbs. (.34 kg)

Steel Cable & Wire Rope Cutter

• Cuts small diameter wire rope & wire• Heavy-duty forged steel blades and handles• Heat treated, precision ground, shear action cutting blades• Cushioned handle grips


722 19990 Wire Rope & Cable Cutter


ire &

Cab

le T

erm

inat

ion

194

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

COMMUNICATIONS AND UNDERGROUND POWER CABLE CUTTINGGator® ESC105 Battery-Powered Cable Cutter

• Two-speed pump advances the ram quickly to start the cut. • Blades open automatically when a cut is complete. • By momentarily pulling the trigger, the operator can save time by stop-

ping the blades at any point to prepare for the next cut. • Scissor-style blades are easy to fit around cables and can pick up cables

on the ground.• Cutting head rotates 360˚ for making cuts in tight locations. • Side handle enhances operator control. • One-hour battery charger, carrying case, and two batteries included. • Choice of 120V, 12V, or 230V battery charger.


ESC10511 12858 Cable Cutter w/120V ChargerESC10512 12859 Cable Cutter w/12V ChargerESC10522 12860 Cable Cutter w/230V Charger07063 07063 12V NIMH Battery12861 12861 Cutting Blade Kit (includes 2 blades)12862 12862 Carrying Case12274 12274 Carrying Strap03046 03046 120V Charger03048 03048 12V Charger03047 03047 230V Charger

sPECiFiCaTiOns

Capacity* 4" dia. (105 mm) Communications, Cu & Al power cables

Length 13-3/4" (604 mm)height 22 lbs. (9.9 kg)Battery 12V, 2.6 Ah, NIMHCycles per Battery Charge 40Battery Charge Time 1 hour

*�Not�for�cutting�ACSR,�guy�strand,�or�other�cables�with�steel�strands�

Gator® ESC85L Battery-Powered Cable Cutter


ESC85L11 52119 Cable Cutter w/120V ChargerESC85L12 52120 Cable Cutter w/12V ChargerESC85L22 52121 Cable Cutter w/230V ChargerESC85L120 52122 Cable Cutter w/120V AC AdapterESC85L230 52123 Cable Cutter w/230V AC Adapter52176 52176 18V 3.0 Ah Li-ion Battery23483 23483 Cutting Blade (2/tool)10118 10118 Carrying Case12274 12274 Carrying Strap52178 52178 120V Charger52179 52179 12V Charger52180 52180 230V Charger

sPECiFiCaTiOns

Capacity 3-3/8" dia. (85 mm)1 Communications,Cu & Al power cables

Length 21" (533 mm)height 14.9 lbs. (6.7 kg)Battery 18V 3.0 Ah Li-ionBattery Charge Time 1 hourEst. Cycles per Charge 90

1�Lead�sheathed�communications�cable:�2-1/2"�(64�mm)�

• For cutting large diameter underground power and communications cables.• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles per charge and faster cycle times.• Retraction Stop allows the operator to stop the ram retraction at any point simply by tapping the trigger, and then starting the next cutting cycle from that point saving time and energy.• LED light provides the operator with the battery charge and tool maintenance status.• Two-stage hydraulic system provides fast advance and power speeds, saving time.• Scissor-style blades are easy to fit around cables.• Side handle enhances operator control• Forward handle position improves tool balance.• One trigger controls all tool functions.• Cutting head rotates 350°• Tools automatically retract when the cutting cycle is complete• Overmolded tacky grip areas make gripping the tool easier and more comfortable.• LED work light illuminates dark work areas.• Greenlee battery-powered cutting tools now use bio-degradable oil.• Smart chargers control the charging current, charging voltage and battery temperature to maximize battery life• Available with 120V, 12V or 230V battery charger or with 120V or 230V corded adapter in place of batteries and charger

www.greenlee.comW


195

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


Hydraulic Communications and Underground Power Cable Cutter Head

• Easily cuts large diameter communication cable and underground distribution cable.

• Swiveling handle allows for quick positioning for cuts.• 3/8" male screw-type coupler.• See pages 430- 433 for hydraulic hose and pump selection.


SDK202GL 03137 Hydraulic Communications Cable Cutter Head

sPECiFiCaTiOns

Capacity 3-1/2" (90 mm) diameter Al and Cu communications cable

Weight 27.5 lb. (12.5 kg).Length 18-7/8" (480 mm)Maximum Operating Pressure 10,000 psi (700 bar)

Heavy-Duty Manual Communications Cable Cutter

• Forged and heat-treated blades specially designed for communications cable.• Easily cuts cables up to 2-1/4" (57 mm) in diameter.• Makes clean cuts with minimal distortion on lead, rubber,

PVC and polyethelyne-sheathed cables.• Blades and handles are replaceable in case of damage.• Precision-ground, shear-type blades.• Fiberglass handles with non-slip rubber grips.


765 06011 Heavy-Duty Communications Cutter05935 05935 Cutter Blade (765) (2 required)

sPECiFiCaTiOns

Cutting Capacity 2-1/4" (57 mm) Communications Cable (900 pair, 24 AWG)Length 37" (940 mm)Weight 7.2 lbs. (3.3 kg)

Ratchet Communications Cutter

This versatile cutter has a specially designed moving blade to handle the larger diameter telephone cable and soft drawn copper and aluminum.

• Cuts up to 2,700 pair 3" telephone cable.• Blade release for safety and fast backout.• Ratchet lock.• Blades are manufactured from high carbon tool steel and heat-treated

for long life.• Rust-resistant, black oxide finish.

sPECiFiCaTiOns

Length 11-1/2" (287 mm)Weight 2.8 lbs. (1.3 kg)


45240 45240 Telco Ratchet Cutter45241 45241 Movable Blade45242 45242 Fixed Blade

Not for use on ACSr or steel jacketed cable


ire &

Cab

le T

erm

inat

ion

196

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

Greenlee Crimping Tool Capacities

TOOL TyPE 4 TOn 4.5 TOn 6 TOn 12 TOn 15 TOn rOTaTinG Quad-POinT diELEss diELEss (4) (5) diE (1)

Ek410L k425O Ek628L (6) hk1230 rk1240 rk1550 k111 k05-1GL k09-2GL k09-3GL rk06aT rk06FT 1981 1990 Ek12idL

k425BG Ek622L Ek1230L hk1240 Ek1550 k05-1sPGL k09-2.5sPGL hk06aT hk06FT hk12id

ECCXL hkL1232 Ek1240L EkO6aTL Ek06FTL

E12CCXL º

COnnECTOr TyPE

indusTriaL

Copper Lugs 8-300 8-500 8-600 (2) 8-750 8-750 8-1500 8-1 8-1/0 8-4/0 3/0-400 6-500 6-750 8-250 4-1000 4-1000

Copper Splices 8-300 8-500 8-600 (2) 8-400 8-750 8-1500 8-1 8-1/0 8-4/0 3/0-400 6-500 6-750 8-250 4-1000 4-1000

Aluminum Lugs 8-2/0 8-4/0 8-300 (3) 8-750 8-750 8-1000 6-400 6-750 8-4/0 6-1000 6-1000

Aluminum Splices 8-2/0 8-4/0 8-300 (3) 8-400 8-750 8-1000 6-400 6-750 8-4/0 6-1000 6-1000

Copper “C” Taps 10-2 12-2 (4) 12-400 12-400 8-1000

Aluminum “H” Taps 6-500 6-500 6-1000

Aluminum Pin

Adapters 6-1/0 6-1/0 (3) 6-500 6-750 6-750 6-750

GrOundinG

Ground Grid

Connectors 6-3 (4) 6-500 6-500 6-500

Copper “E” Taps 6-500 6-500 6-500

OVErhEad

5/8" Service

Ent. Connectors 10-1/0 10-1/0 10-1/0 (4) 10-1/0 10-1/0 10-1/0 8-1/0 8-1/0

.840 Service Ent.

Connectors 1/0-4/0 1/0-4/0 1/0-4/0 (4) 1/0-4/0 1/0-4/0 1/0-4/0 4-350 4-350

Aluminum “H” Taps 6-4/0 6-4/0 (4) 6-500 6-500 6-900

Copper “H” Taps 10-2 12-2 (4) 12-4/0 12-4/0 12-4/0

Copper Tension

Splice 6-2/0 6-2/0 (4) 6-500 6-500 6-500 6-4/0 6-4/0

All Aluminum

Tension Splice 6-4/0 6-4/0 (4) 6-587.5 6-587.5 6-587.5

One Piece ACSR

Tension Splice 4-1/0 4-1/0 (4) 4-556.5 4-556.5 4-556.5 4-477 4-477

Two Piece ACSR

Tension Splice 2-477 2-4/0 (4) 2-556.5 2-556.5 2-900

Aluminum Jumper

Splice 4-266.8 4-266.8 (4) 4-556.5 4-556.5 4-795

Stirrups 2-4/0 6-4/0 (4) 6-500 6-500 6-500

Aluminum Lugs 2-1/0 4-4/0 (4) 4-556.5 4-556.5 4-795

Copper Lugs 6-1/0 1/0-2/0 (4) 1/0-500 1/0-500 1/0-500

NOTES:� � � � �(1)� Die�wheels�are�rotated�to�match�the�cable�size.�Dies�are�color�coded�and�marked�with�the�cable�size.�(2)� Capacity�using�Greenlee�KC22�dies.�(3)� Capacity�using�Greenlee�KA22�dies.�(4)� Capacity�using�“W”�dies.�(5)� Capacity�using�“U”�dies.�(6)� Not�for�use�with�Burndy�400,�500,�and�600�kcmil�splices�and�Penn-Union�600�kcmil�splices.�The�EK628L�can�be�used�with�all�sizes�of�Burndy�&�Penn-Union�lugs�from�8AWG�to�600�kcmil.

www.greenlee.comW


197

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


DIE-TYPE CRIMPINGGator® Battery-Powered 4-Ton Crimping Tool

sPECiFiCaTiOns

Capacity 8 AWG to 300 kcmil (MCM) copper color-coded connectors 8 AWG to 2/0 AWG aluminum color-coded connectors 5/8" service entrance connectors 840 service entrance connectors

Crimping Force 7,900 lb. (35 kN)Length 13-1/4" (337 mm)Width 2-7/8" (73 mm)Weight 4 lbs. (1.8 kg)Crimp Cycle Time ~4 secondsBattery 18V 1.5 Ah Li-ion Battery Charge Time 30 minutesEst. Cycles per Charge 200

• Intelligent Crimping System Technology includes a pressure sensor that monitors the crimping force of each crimp and provides the operator a visual and audible alert if the force is below specifications.



• In line tool style is light weight and very easy to control• One trigger controls all tool functions.• Crimping head rotates 350°• Tools automatically retract when the crimping or cutting cycle is complete• Overmolded tacky grip areas make gripping the tool easier and more


temperature to maximize battery life• Used with Greenlee KC4, KA4 and KD4 crimping dies.• Available with 120V, 12V or 230V battery charger or with 120V or 230V

corded adapter in place of batteries and charger

EK410L

Crimping�dies�on�page�210


EK410L11 52089 4-Ton Battery-Powered Crimping Tool, 120V Charger



EK410L120 52092 4-Ton Crimping Tool w/120V AC AdapterEK410L230 52101 4-Ton Crimping Tool w/230V AC Adapter52177 52177 18V 1.5 Ah Li-ion25752 25752 Carrying Case52178 52178 120V Charger52179 52179 12V Charger52180 52180 230V Charger

*UL�and�cUL�classified�with�Anderson®,�Blackburn®,�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�

Thomas�&�Betts®�copper�and�aluminum�color-coded�connectors.�The�products�listed�above�are�registered�trademarks�of�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®.


ire &

Cab

le T

erm

inat

ion

198

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

EK628L Battery-Powered 6-Ton Crimping Tool

sPECiFiCaTiOns

Capacity* 8AWG to 600 kcmil copper color-coded connectors 8AWG to 350 kcmil aluminum color-coded connectors

Crimping Force 12,000 lbs (53 kN)Length 18-1/2" (470 mm)Width 2-7/8" (73 mm)Weight 6 lbs. (2.7 kg)Battery 18V 1.5 Ah Li-ionCrimp Cycle Time ~6 secondsBattery Charge Time 30 minutesEst. Cycles per Charge 150


EK628L11 52102 EK628L crimping tool w/120 V battery chargerEK628L12 52103 EK628L crimping tool w/12 V battery chargerEK628L22 52104 EK628L crimping tool w/230 V battery chargerEK628L120 52105 EK628L Crimping Tool w/120V AC AdapterEK628L230 52106 EK628L Crimping Tool w/230V AC AdapterK22S1GL 03078 Die Kit for 8 AWG-600 kcmil Copper Connectors

(Includes all copper die sets listed below and carrying case)

KD06AL 01631 Die Kit for 8 AWG-350 kcmil Aluminum Connectors (Includes all aluminum die sets listed below and carrying case)

CJD3 03242 Crimping jaw unit- “W” diesCJK 04829 Crimping jaw unit- Thomas & Betts “6-Ton” dies25752 25752 Carrying Case52177 52177 18V 1.5 Ah Li-ion52178 52178 120V Charger52179 52179 12V Charger52130 52130 230V Charger


*UL�and�cUL�classified�from�8�AWG�to�600�kcmil�with�Anderson®,�Blackburn®,�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®�copper�code�color-coded�connectors�when�used�with�Greenlee�KC22�crimping�dies.�Not�for�use�with�Burndy�400,�500�or�600�kcmil�splices�and�Penn-Union�600�kcmil�splices.�UL�&�cUL�classified�from�8�AWG�to�350�kcmil�(MCM)�with�Anderson,�Blackburn®,�Burndy,�ILSCO,�Panduit,�Thomas�&�Betts,�and�Penn-Union�aluminum�code�color-coded�connectors�when�used�with�Greenlee�KA22�crimping�dies.






temperature to maximize battery life• Available with 120V, 12V or 230V battery charger or with 120V or 230V

corded adapter in place of batteries and charger• Equipped with CJ22 crimping jaws that accept Greenlee KC22 and KA22

series crimping dies.• When equipped with optional CJD3 crimping jaws, can be used with all

industry "W" style crimping dies & Greenlee KD6 series dies.• When equipped with optional CJK crimping jaws, can be used with

Thomas & Betts "6-Ton" crimping dies.

EK628L

www.greenlee.comW


199

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL



Gator® Battery-Powered and Corded 6-Ton Crimping Tools


Capacity Color-coded copper lugs and splices, 600 kcmil (MCM). Color-coded aluminum lugs and splices, 350 kcmil (MCM). For capacity with other types of connectors, see chart on page 196.

Crimping Force 12,000 lb (53 kN)Length 15-3/4" (438 mm)Weight 6.5 lbs. (3 kg)Battery 18V 1.5 Ah Li-ion)Battery charge time 30 minutesEst. Cycles per Charge 100


EK622L11 52084 6-Ton Battery-Powered Crimping Tool 120 V chargerEK622L12 52085 6-Ton Battery-Powered Crimping Tool 12 V chargerEK622L22 52086 6-Ton Battery-Powered Crimping Tool 230 V chargerEK622L120 52087 6-Ton Crimping Tool w/120V AC AdapterEK622L230 52088 6-Ton Crimping Tool w/230V AC Adapter52177 52177 18V 1.5 Ah Li-ion25752 25752 EK622L Carrying Case12274 12274 Carrying Strap04292 04292 Die Adapter for “W” Type Dies52178 52178 120V Charger52179 52179 12V Charger52180 52180 230V Charger

*UL�and�cUL�classified�with�Anderson®,�Blackburn®,�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�

Thomas�&�Betts®�copper�lugs�and�splices�to�600�kcmil�(MCM)�and�with�aluminum�lugs�&�splices�to�350�kcmil�(MCM).�The�products�listed�above�are�registered�trademarks�of�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®.






temperature to maximize battery life• Accepts Greenlee KC22 and KA22 series crimping dies.• Includes 04292 die adapters which can be used with all industry "W"

style crimping dies and Greenlee KD6 style dies.• Available with 120V, 12V or 230V battery charger or with 120V or 230V

corded adapter in place of batteries and charger

EK622L


ire &

Cab

le T

erm

inat

ion

200

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

Gator® 12-Ton Battery-Powered Crimping Tools

sPECiFiCaTiOns

Capacity* EK1230L & EK1240L – 8 AWG to 750 kcmil copper color-coded lugs and splices See crimping tool capacity chart on page 196, for additional capacities EK1240K – ACSR terminals 1033 kcmil (MCM), ACSR tension fittings 477 kcmil (MCM)

Crimping Force 24,000 lb (106 kN)Length EK1230L – 15-1/2" (394 mm);

EK1240L – 16-1/4" (413 mm);Weight EK1230L – 14.5 lbs (6.6 kg)

EK1240L – 15 lbs. (6.8 kg)EK1240KL – 15 lbs. (6.8 kg)

Battery 18V 3.0 Ah Li-ionEst. Cycles per Charge 90



• Automatic Retraction Stop (ARS) which retracts the ram just enough to get ready for the next cycle saving time and energy.

• LED light provides the operator with the battery charge and tool maintenance status.• Two-stage hydraulic system provides fast advance and power speeds, saving time.• Forward handle position improves tool balance.• One trigger controls all tool functions.• Crimping head rotates 350°• Tools automatically retract when the crimping cycle is complete• Overmolded tacky grip areas make gripping the tool easier and more comfortable.• LED work light illuminates dark work areas.• Greenlee battery-powered crimping tools now use bio-degradable oil.• Smart chargers control the charging current, charging voltage and battery

temperature to maximize battery life• Available with 120V, 12V or 230V battery charger or with 120V or 230V corded

adapter in place of batteries and charger• Three crimping head choices: EK1230L with 1.20" (30mm) opening uses

Greenlee KC12, KA12 & KD12 crimping dies plus all industry "U" style crimping dies, EK1240L with 1.65" (42mm) opening uses Greenlee KC12, KA12 & KD12 crimping dies plus all industry "U" style crimping dies, EK1240KL uses Kearney PH2 style crimping dies.

• Covered head models have two layers of PVC that total approximately 3/16" (4.8 mm) thick. The outer layer is black and the inner layer is red.

• U.S. Patents #6,206,663 and #6,065,326

EK1230L

EK1240L


EK1230L11 52068 12-Ton Battery-Powered Crimping Tool, 1.2" (30 mm) opening, 120 V Charger



EK1230L120 52071 12-Ton Crimping Tool w/120V AC AdapterEK1230L230 52072 12-Ton Crimping Tool w/230V AC AdapterEK1240L11 10227 12-Ton Battery-Powered Crimping Tool, 1.65" (42 mm)

opening, 120 V ChargerEK1240L12 10229 12-Ton Battery-Powered Crimping Tool, 1.65" (42 mm)

opening, 12 V ChargerEK1240L22 10231 12-Ton Battery-Powered Crimping Tool, 1.65" (42 mm)

opening, 230 V ChargerEK1240L120 10234 12-Ton Crimping Tool w/120V AC AdapterEK1240L230 10237 12-Ton Crimping Tool w/230V AC AdapterEK1240CL11 52043 12-Ton Battery-Powered Crimping Tool, 1.65" (42 mm)

opening, PVC covered, 120 V ChargerEK1240CL12 52044 12-Ton Battery-Powered Crimping Tool, 1.65" (42 mm)

opening, PVC covered, 12 V ChargerEK1240CL22 52045 12-Ton Battery-Powered Crimping Tool, 1.65" (42 mm)

opening, PVC covered, 230 V ChargerEK1240CL120 52046 12-Ton Crimping Tool w/120V AC AdapterEK1240CL230 52047 12-Ton Crimping Tool w/230V AC AdapterEK1240KL11 12566 12-Ton Battery-Powered Crimping Tool, Kearney head,

120 V ChargerEK1240KL12 12567 12-Ton Battery-Powered Crimping Tool, Kearney head,

12 V ChargerEK1240KL22 12569 12-Ton Battery-Powered Crimping Tool, Kearney head,

230 V ChargerEK1240KL120 12568 12-Ton Crimping Tool w/120V AC Adapter52176 52176 18V 3.0 Ah Li-ion Battery10118 10118 EK1230L & EK1240L Carrying Case12274 12274 Carrying Strap52178 52178 120V Charger52179 52179 12V Charger52180 52180 230V Charger

*�EK1230�and�EK1240�are UL�and�cUL�classified�with�Anderson®,�Blackburn®,�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®�copper�and�aluminum�color-coded�lugs�and�splices�when�used�with�Greenlee�KC12�and�KA12�crimping�dies.�The�products�listed�above�are�registered�trademarks�of�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®.


EK1240CL

EK1240KL

www.greenlee.comW


201

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


sPECiFiCaTiOns

Capacity* HK1230 & HK1240 –8 AWG to 750 kcmil copper color-coded lugs and splices. See crimping tool capacity chart on pg. 196;

Crimping Force 24,000 lbs (106 kN)Length HK1230 – 20-3/8" (518 mm);

HK1240 – 21-1/2" (546 mm);Weight HK1230 – 12.2 lbs (5.5 kg)

HK1240 – 13.2 lbs (6.0 kg)

12-Ton Manual Hydraulic Crimping Tools


HK1230 06426 12-Ton Hydraulic Crimping Tool, 1.2" (30 mm) openingHK1230C 07199 12-Ton Hydraulic Crimping Tool, 1.2" (30 mm) opening,

PVC coveredHK1240 06427 12-Ton Hydraulic Crimping Tool, 1.65" (42 mm) openingHK1240C 07202 12-Ton Hydraulic Crimping Tool, 1.65" (42 mm) opening,

PVC covered

• Two crimping head choices: HK1230 with 1.20" (30 mm) opening, and HK1240 with 1.65" (42 mm) opening.

• Both heads accept Greenlee KC12, KA12 and KD12 crimping dies as well as industry "U" style dies.

• New head designs result in lower weight and improved durability – tested to 50,000 crimp cycles.

• Two-speed pump to reduce cycle time.• Ram automatically retracts when crimp cycle is complete

– a Greenlee exclusive.• Crimping heads rotate 360°.• Smaller and lighter than competitive tools.• Covered head models have two layers of PVC that total approximately

3/16" (4.8 mm) thick. The outer layer is black and the inner layer is red.• Includes carrying case.• U.S. Patent #6,206,663.

HK1230

HK1240C

HK1240


*HK1230�and�HK1240�are�UL�and�cUL�classified�with�Anderson,�Blackburn,�FCI�Burndy,�ILSCO,�Panduit,�Penn-Union�and�Thomas�&�Betts�copper�and�aluminum��color-coded�lugs�and�splices�when�used�with�Greenlee�KC12�and�KA12�crimping�dies.�The�products�listed�above�are�registered�trademarks�of�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®.

12-Ton Manual Hydraulic Crimping Tool


HKL1232 23521 12-Ton Hydraulic Crimping Tool, 1.4" (32 mm) opening

sPECiFiCaTiOns

Capacity* 8 AWG to 750 kcmil copper color-coded lugs and splices. See crimping tool capacity chart on page 196 for additional capacities.

Crimping Force 24,000 lbs (106 kN)Length 24-1/4" (616 mm)

• Two-speed ram advances fast and shifts to lower speed to complete the crimp.• Strong, lightweight fiberglass handles.• Push button permits dies to be inserted and removed easily.• The “C” style head has a 1.4" (32 mm) opening for easy placement

on connectors.• Tool is supplied in a durable, molded plastic carrying case.• Accepts Greenlee KC12, KA12 and KD12 as well as Industry

“U” style dies.


*UL�and�cUL�is�classified�with�Anderson,�Blackburn,�FCI�Burndy,�ILSCO,�Panduit,�Penn-Union�and�Thomas�&�Betts�copper�and�aluminum�color-coded�lugs�and�splices�when�used�with�Greenlee�KC12�and�KA12�crimping�dies.�The�products�listed�above�are�registered�trademarks�of�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®.


ire &

Cab

le T

erm

inat

ion

202

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

12-Ton Remote-Powered Crimping Heads

sPECiFiCaTiOns

Capacity* 8 AWG to 750 kcmil copper color-coded lugs and splices. See crimping tool capacity chart on pg. 196 for additional capabilities

Crimping Force 24,000 lbs (106 kN)

Length 11-7/8" (302 mm)Weight RK1240 – 9.7 lbs. (4.4 kg)Max. Operating Pressure

10,000 psi (700 bar)

CaT. nO. uPC nO. dEs CriPTiOn

RK1240 05351 12-Ton Remote-Powered Crimping Head, 1.65" (42 mm) opening

RK1240C 07205 12-Ton Remote-Powered Crimping Head, 1.65" (42 mm) opening, PVC covered

• Use Greenlee KC12, KA12 and KD12 crimping dies as well as industry “U” type dies

• Crimping head has 1.65" (42 mm) opening.• New head designs result in lower weight and improved durability

– tested to 50,000 crimp cycles.• Boss included on each crimping head for use with hotsticks.• Easy to get into tight locations, light weight makes them excellent choices

for hotstick use.• Single-acting tools require an external hydraulic pump capable of

10,000 psi (700 bar).• Equipped with a 3/8" male screw-type coupler.• Capable of crimping a wide range of lugs, C-taps, H-taps and overhead

tension sleeves.• Covered head models have two layers of PVC that total approximately

3/16" (4.8 mm) thick. The outer layer is black and the inner layer is red. • Includes carrying case.• See pages 430- 433 for hydraulic hose and pump selection.

rK1240


*RK1240�are�UL�and�cUL�classified�with�Anderson,�Blackburn,�FCI�Burndy,�ILSCO,�Panduit,�Penn-Union�and�Thomas�&�Betts�copper�and��aluminum�color�coded�lugs�and�splices�when�used�with�Greenlee�KC12�and�KA12�crimping�dies.�The�products�listed�above�are�registered�trademarks�of�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®.

rK1240C

www.greenlee.comW


203

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


Gator® Battery-Powered 15-Ton Crimping Tool

EK1550L11


Capacity Color-coded copper lugs and splices, 8 AWG to 1000 kcmil (MCM). Color-coded aluminum lugs and splices, 8 AWG to 1000 kcmil (MCM).

Crimping Force 30,000 lb (134 kN)Length 19-5/8" (498 mm)height 15" (381 mm)Weight 19 lbs. (8.5 kg)Battery 18 V, 3.0 Ah, Li-ionBattery Charge Time 1 hourEst, Cycles per Charge 50


EK1550L11 52150 15-Ton Battery-Powered Crimping Tool w/120 V chargerEK1550L12 52151 15-Ton Battery-Powered Crimping Tool w/12 V chargerEK1550L22 52152 15-Ton Battery-Powered Crimping Tool w/230 V chargerEK1550L120 52152 15-Ton Battery-Powered Crimping Tool w/120 V AC

AdapterEK1550L230 52154 15-Ton Battery-Powered Crimping Tool w/230 V AC

Adapter48820 48820 Die Adapters - Burndy P dies (Y46), Ilsco ILD-P dies48788 48788 Die Adapters - T&B 15600 dies, Blackburn 15600 dies48802 48802 Die Adapters - Greenlee 12-Ton dies, Burndy 12-Ton dies,

Ilsco ILD dies, T&B 15500 dies, Blackburn 15500 dies48824 48824 Die Adapters - Kearney PH2/WH212274 12274 Carrying Strap52176 52176 18 V, 3.0 Ah, Li-ion Battery10118 10118 Carrying Case52178 52178 120V Charger52179 52179 12V Charger52180 52180 230V Charger

*EK1550L�tools�are�UL�and�cUL�classified�with�Anderson,�Blackburn,�Burndy,�ILSCO,�Panduit,�Penn-Union�and�Thomas�&�Betts�copper�and�aluminum�color�coded�lugs�and�splices�when�used�with�48802�die�adapters�and�with�Greenlee�KC12�and�KA12�crimping�dies.�The�products�listed�above�are�registered�trademarks�of�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®.






• Forward handle position improves tool balance.• One trigger controls all tool functions.• Crimping head rotates 350O• Tools automatically retract when the crimping cycle is complete• Overmolded tacky grip areas make gripping the tool easier and more


temperature to maximize battery life• Available with 120V, 12V or 230V battery charger or with 120V or 230V corded

adapter in place of batteries and charger• Interchangeable adapters permit the use of a wide variety of

crimping dies. Accepts Kearney PH4/P14 dies without adapter.• Assist handle is included to provide better balance for the tool


ire &

Cab

le T

erm

inat

ion

204

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

15-Ton Crimping Tool


RK1550 05353 15-Ton Single-Acting Remote-Powered Crimping Tool48820 48820 Die Adapters – Burndy P dies (Y46), llsco ILD-P dies48788 48788 Die Adapters – T&B 15600 dies, Blackburn 15600 dies48802 48802 Die Adapters – Greenlee U dies, Burndy U dies,

llsco ILD dies, T&B 15500 dies, Blackburn 15500 dies48824 48824 Die Adapters – Kearney PH2/WH2 dies

sPECiFiCaTiOns

Capacity* Color-Coded copper lugs and splices: #8 to 1500 kcmil (MCM) Color-Coded aluminum lugs and splices: #8 to 1000 kcmil (MCM) For other connector types, see the capacity chart on page 196

Crimping Force at 10,000 psi (700 bar)

30,000 lbs (133 kN)

Length 15" (380 mm);Width 3" (76 mm)height 5-3/8" (135 mm)Weight 14.1 lbs. (6.4 kg)

Operating Pressure 10,000 psi (700 bar)

Crimping Tool 8-1 AWG

sPECiFiCaTiOns

Capacity* 8 AWG – 1 AWG copper color-coded connectorsLength 10" (273 mm)Weight 1.4 lbs. (0.6 kg)


K111 10763 Crimping Tool

• Interchangeable adapters permit the use of a wide variety of die types for all common crimping applications.

• Accepts Kearney PH4/PH14 dies without adapters.• Zinc-plated head resists corrosion better than other finishes.• Hot stick attachment point is standard.• Operates with most 10,000 psi (700 bar) hydraulic sources.• Equipped with 3/8" male screw-type 10,000 psi (700 bar) coupler.• Includes carrying case.• See pages 430- 433 for hose and pump selection.

• Small size and light weight make this an ideal tool for crimping small lugs and splices.

• Easily fits in tool pouches. • Full-cycle mechanism assures that crimps are complete. • Jaws can be opened in mid-cycle if necessary to adjust connector. • Wide grips make crimping easy on the hands.

*UL�and�cUL�classified�with�Anderson,�Blackburn,�FCI�Burndy,�ILSCO,�Panduit,�Penn-Union�and�Thomas�&�Betts�copper�and�aluminum�color-coded�lugs�and�splices�up�to�750kcmil�using�48802�die�adapters�when�used�with�Greenlee�KC12�and�KA12�crimping�dies.�The�products�listed�above�are�registered�trademarks��of�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®.

*UL�and�cUL�classified�with�Anderson,�Blackburn,�Burndy,�ILSCO,�Panduit,�Penn-Union�and�Thomas�&�Betts�copper�color-coded�connectors.��The�products�listed�above�are�registered�trademarks�of�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®.

www.greenlee.comW


205

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


K-Series Crimping Tool 8-1/0 AWG


K05-1GL 02624 Crimping ToolK05-1SPGL 02625 Crimping Tool, full cycle mechanism02694 02694 Die Set

sPECiFiCaTiOns

Capacity* 8 AWG – 1/0 AWG CopperLength 15.4" (390 mm)Weight 2.4 lbs. (1.1 kg)

K-Series Crimping Tool 8-4/0 AWG

sPECiFiCaTiOns

Capacity* 8 AWG – 4/0 AWG CopperLength 25.5" (650 mm)Weight 6.4 lbs. (2.9 kg)


K09-2GL 02628 Crimping ToolK09-2SPGL 02629 Crimping Tool, full cycle mechanism02912 02912 Die Set

• Crimps smaller copper connectors.• Small, light weight, easy to handle.• Easy to get in tight locations.• Color-coded, hexagonal rotating dies.• Full cycle mechanism releases only after full crimp cycle is completed.

K-Series Crimping Tool 3/0-400

• Crimps the larger copper connector sizes all the way to 400 kcmil (MCM).• Color-coded, hexagonal rotating dies.


K09-3GL 02630 Crimping Tool02913 02913 Die Set

sPECiFiCaTiOns

Capacity* 3/0 AWG – 400 kcmil (MCM) CopperLength 25.5" (650 mm)Weight 6.4 lbs. (2.6 kg)

Manual Crimping Tool• Designed for crimping a wide range of overhead service entrance connections,

overhead splices, and overhead taps.• Easy-to-use MD-6 type “pop” tool.• K425 tools are equipped with D

³ die groove and either “BG” or “O” die groove.• K425K tools are equipped with a die groove for Kearney® “O” dies and either

a 5/8" or “O” die groove• The D

³ die groove serves as a die seat for all Greenlee KD6 and industry “W” type dies. Page 211.

• Bent fiberglass handles provide a solid grip, good leverage and better durability than wood.

• Teflon-impregnated bushings at pivot joints provide smooth operation and long life.

• Complete crimps are assured with an over-center cam mechanism.• Tool can easily be checked visually for proper adjustment and can be

adjusted with Allen wrenches.


K425O 02064 Crimping Tool with D³ and O die groovesK425BG 02065 Crimping Tool with D³ and BG die groovesK425K58 08160 Crimping Tool with Kearney® O and

5/8 die groovesK425KO 08161 Crimping Tool with Kearney® D and

O die grooves

sPECiFiCaTiOns

Capacity* See capacity chart on page 196Crimping Force 9,000 lb. (40 kN)Length 25-3/8" (645 mm)Weight 7.1 lbs. (3.2 kg)

• Crimps all the popular small to mid-range copper connector sizes.• Long length results in low handle efforts.• Color-coded, hexagonal rotating dies.• Full cycle mechanism releases only after full crimp cycle is completed.

K425bG

*UL�and�cUL�classified�with�Anderson,�Blackburn,�Burndy,�ILSCO,�Panduit,�Thomas�&�Betts�and�Penn-Union�copper�connectors.��The�products�listed�above�are�registered�trademarks�of�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®.

*UL�and�cUL�classified�with�Anderson,�Blackburn,�Burndy,�ILSCO,�Panduit,�Thomas�&�Betts�and�Penn-Union�copper�connectors.��The�products�listed�above�are�registered�trademarks�of�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®.

*UL�classified�and�CSA�certified�with�Anderson,�Blackburn,�Burndy,�ILSCO,�Panduit,�Thomas�&�Betts�and�Penn-Union�copper�connectors.��The�products�listed�above�are�registered�trademarks�of�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®.


ire &

Cab

le T

erm

inat

ion

206

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

Gator® Battery-Powered Quad-Point Dieless Crimping ToolsDIELESS CRIMPING

EK06AtL


Capacity* See crimping tool capacity chart on page 196

Crimping Force 12,400 lbs (55 kN)Length EK06ATL & EK06ATCL – 14"(355 mm)

EK06FTL – 14-7/8" (378 mm)Weight EK06ATL & EK06ATCL – 12 lbs. (5.4 kg)

EK06FT – 11 lbs. (5 kg)Battery 18V 3.0 Ah Li-ionBattery Charge Time 1 hour


EK06ATL11 52053 Quad-Point Battery-Powered Crimping Tool, Open Head Dieless, 120 V Charger



EK06ATL120 52056 Quad-Point Crimping Tool w/120V AC AdapterEK06ATL230 52057 Quad-Point Crimping Tool w/230V AC AdapterEK06ATCL11 52058 Quad-Point Battery-Powered Crimping Tool, Open Rubber

Covered Head Dieless, 120 V Charger

EK06ATCL12 52059 Quad-Point Battery-Powered Crimping Tool, Open Rubber Covered Head Dieless, 12 V Charger

EK06ATCL22 52060 Quad-Point Battery-Powered Crimping Tool, Open Rubber Covered Head Dieless, 230 V Charger

EK06ATCL120 52061 Quad-Point Crimping Tool w/120V AC AdapterEK06ATCL230 52062 Quad-Point Crimping Tool w/230V AC AdapterEK06FTL11 52063 Quad-Point Battery-Powered Crimping Tool, Flip-Top Head

Dieless, 120 V ChargerEK06FTL12 52064 Quad-Point Battery-Powered Crimping Tool, Flip-Top Head

Dieless, 12 V ChargerEK06FTL22 52065 Quad-Point Battery-Powered Crimping Tool, Flip-Top Head

Dieless, 230 V ChargerEK06FTL120 52066 Quad-Point Crimping Tool w/120V AC AdapterEK06FTL230 52067 Quad-Point Crimping Tool w/230V AC Adapter52176 52176 18V 3.0 Ah Li-ion10118 10118 Carrying Case12274 12274 Carrying Strap52178 52178 120V Charger52179 52179 12V Charger52180 52180 230V Charger

*FT�tools�are�UL�and�cUL�classified�with�#4AWG�–�750�kcmil�(MCM)�copper�color-coded�connectors�and�#6AWG�–�750�kcmil�(MCM)�aluminum�color-coded��connectors�of�the�following�brands:�Anderson,�Blackburn,�FCI�Burndy,�Ilsco,�Panduit,�Penn-Union,�and�Thomas�&�Betts.�AT�tools�are�UL�and�cUL�classified�with�#4�–�500�kcmil�(MCM)�copper�color-coded�connectors�of�the�following�brands:�Anderson,�Blackburn,�FCI�Burndy,�ILSCO,�Panduit,�Penn-Union,�&�Thomas�&�Betts.��The�products�listed�above�are�registered�trademarks�of�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®.

EK06FtL






• Forward handle position improves tool balance.• One trigger controls all tool functions.• Crimping head rotates 350°• Tools automatically retract when the crimping cycle is complete• Overmolded tacky grip areas make gripping the tool easier and more


temperature to maximize battery life.• Utilizes four indentors to make the crimp.• Flip-top style uses a pull pin to open head for easy removal from the

connector.• U.S. Patents #6,206,663 and #6,065,326• Available with 120V, 12V or 230V battery charger or with 120V or 230V

corded adapter in place of batteries and charger.

DIELESS

.

www.greenlee.comW


207

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


Manual Hydraulic Quad-Point Dieless Crimping Tools


HK06AT 06065 Hydraulic Quad-Point Crimping Tool, Open Head Dieless

HK06FT 06196 Hydraulic Quad-Point Crimping Tool, Flip-Top Dieless

sPECiFiCaTiOns

Capacity* See crimping tool capacity chart on page 196.Length HK06AT – 20-3/4" (525 mm)

HK06FT – 21-1/16" (535 mm)Weight 9.0 lbs. (4.1 kg)

• Utilizes four indentors to make the crimp.• Two-speed pump advances the ram quickly to start the crimp, reducing

crimp completion time. The ram automatically retracts after the crimp is complete.

• Flip-top style uses a pull pin to open head for easy removal from the connector.

• Compact, featuring a 360° rotating head.• Includes carrying case, test gauge and test slugs.• U.S. Patents #6,206,663 and #6,065,326.

HK06At

HK06Ft

Quad-Point Dieless Remote-Powered Crimping Heads

sPECiFiCaTiOns

Capacity* See crimping tool capacity chart on page 196.Crimping Force 6.2 tons (55 kN)Length RK06AT – 10" (254 mm); RK06FT – 10-1/2" (267 mm)Weight 6.2 lbs. (2.8 kg)


RK06AT 06066 Remote Powered Quad-Point Crimping Tool, Open Head Dieless

RK06FT 06197 Remote Powered Quad-Point Crimping Tool, Flip-Top Head Dieless

• Utilizes four indentors to make the crimp.• Operates from 10,000 psi (700 bar) hydraulic pumping sources.• Small and lightweight for difficult-to-reach locations.• Equipped with 3/8 in. male screw-type couplers.• Flip-top style uses a pull pin to open head for easy removal from

the connector.• Includes carrying case, test gauge and test slugs.• See pages 430-433 for hose and pump selection.

rK06Ft

rK06At

*FT�tools�are�UL�and�cUL�classified�with�#4AWG�–�750�kcmil�(MCM)�copper�color-coded�connectors�and�#6AWG�–�750�kcmil�(MCM)�aluminum�color-coded��connectors�of�the�following�brands:�Anderson,�Blackburn,�FCI�Burndy,�Ilsco,�Panduit,�Penn-Union,�and�Thomas�&�Betts.AT�tools�are�UL�and�cUL�classified�with�#4�–�500�kcmil�(MCM)�copper�color-coded�connectors�of�the�following�brands:�Anderson,�Blackburn,�FCI�Burndy,�ILSCO,�Panduit,�Penn-Union,�&�Thomas�&�Betts.�The�products�listed�above�are�registered�trademarks�of�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®.

*FT�tools�are�UL�and�cUL�classified�with�#4AWG�–�750�kcmil�(MCM)�copper�color-coded�connectors�and�#6AWG�–�750�kcmil�(MCM)�aluminum�color-coded��connectors�of�the�following�brands:�Anderson,�Blackburn,�FCI�Burndy,�Ilsco,�Panduit,�Penn-Union,�and�Thomas�&�Betts.AT�tools�are�UL�and�cUL�classified�with�#4�–�500�kcmil�(MCM)�copper�color-coded�connectors�of�the�following�brands:�Anderson,�Blackburn,�FCI�Burndy,�ILSCO,�Panduit,�Penn-Union,�&�Thomas�&�Betts.�The�products�listed�above�are�registered�trademarks�of�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®.


ire &

Cab

le T

erm

inat

ion

208

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

EK12IdL

Gator® Dieless Crimping Tools

• Dieless indent style crimping head does not require interchangeable crimping dies.






• Forward handle position improves tool balance.• One trigger controls all tool functions.• Crimping head rotates 350°• Tools automatically retract when the crimping cycle is complete• Overmolded tacky grip areas make gripping the tool easier and more


temperature to maximize battery life.• Flip open crimping head will allow crimping of 4 AWG - 1000 kcmil copper or

6 AWG - 1000 kcmil aluminum with no dies to change.• Available with 120V, 12V or 230V battery charger or with 120V or 230V corded

adapter in place of batteries and charger

*UL�and�cUL�classified�with�Anderson®,�Blackburn®,�Burndy®,�ILSCO®,�Panduit®,�Thomas�&�Betts®,�Penn-Union®�and�Tyco®�color-coded�connectors.The�products�listed�above�are�registered�trademarks�of�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®�and�Tyco®.

*UL�and�cUL�classified�with�Anderson®,�Blackburn®,�Burndy®,�ILSCO®,�Panduit®,�Thomas�&�Betts®,�Penn-Union®�and�Tyco®�color-coded�connectors.The�products�listed�above�are�registered�trademarks�of�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®�and�Tyco®.


EK12IDL11 52048 Battery-Powered Dieless Crimping Tool, 115 V Battery Charger EK12IDL12 52049 Battery-Powered Dieless Crimping Tool, 12 V Battery Charger

EK12IDL22 52050 Battery-Powered Dieless Crimping Tool, 230 V Battery Charger EK12IDL120 52051 Crimping Tool w/120V AC AdapterEK12IDL230 52052 Crimping Tool w/230V AC Adapter12274 12274 Carrying Strap52178 52178 120V Charger52179 52179 12V Charger52180 52180 230V Charger52176 52176 18V 3.0 Ah Li-ion Battery10118 10118 EK12IDL Carrying Case

Hand Hydraulic Dieless Crimping Tool• Dieless indent style crimping head does not require interchangeable

crimping dies• Flip-open Crimping head rotates 350° to get into tight locations• Two-speed pump provides rapid crimping cycle time.• Lightweight and strong fiberglass handles• Comes with a molded carrying case


HK12ID 10107 Dieless Hydraulic Crimping Tool

sPECiFiCaTiOns

Capacity* Copper – 4 AWG - 1000 kcmil (MCM) Aluminum – 6 AWG - 1000 kcmil (MCM)

Length 26" (657 mm)Weight 15 lbs. (7 kg)

sPECiFiCaTiOns

Ek12idL

Length 16 1/2" (420 mm)

height 14 1⁄2" (368 mm)

Weight 15 lbs (6.8 kg)

Battery 18V 3.0 Ah Li-ion

Battery Charge Time: 1 hour

Capacity*

• Copper Color Coded Lugs and Splices: 4 AWG to 1000 kcmil*• Aluminum Color Coded Lugs and Splices: 6 AWG to 1000 kcmil*

DIELESS

www.greenlee.comW


209

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


Dieless Crimping Tool to 1000 kcmil (MCM)• Dieless crimping head; no dies to lose or replace.• Patented pressure system automatically changes crimping force

for each connector size/type. Eliminates errors.• Seven indent profile requires fewer crimps per connector.• Automatic two-speed pump for rapid advance. • 15 ton (133.4 kN) maximum crimping force.• Swivel head rotates 180° for maximum flexibility.• Hinged head for easy connector loading and unloading.• Includes Pressure Test Kit and carrying case.• Not for use with “C” and “H” taps.


1990 32489 Dieless Crimping Tool to 1000 kcmil (MCM)32891 32891 Pressure Test Kit includes 30 test slugs and gauge

sPECiFiCaTiOns

Capacity* Copper – #4 AWG - 1000 kcmil (MCM) Aluminum – # 6 AWG - 1000 kcmil (MCM) For use with connectors up to a maximum of 1.815" (46.10 mm) diameter


*UL�and�cUL�classified�for�use�with�Anderson,�Blackburn,�FCI�Burndy,�ILSCO,�Panduit,�Penn-Union�and�Thomas�&�Betts�copper�color-coded�connectors�4�AWG-1000�kcmil�(MCM)�and�aluminum�color-coded�connectors�6�AWG-1000�kcmil�(MCM).�The�products�listed�above�are�registered�trademarks�of�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®.

Indentor Crimping Tool• Simple screw adjustment for connector size.• Forged body and handle for durability.


1981 06894 Indentor Crimping Tool

sPECiFiCaTiOns

Capacity* Copper color-coded connectors: 8 AWG-250 kcmil (MCM) Aluminum color-coded connectors: 8 AWG-4/0 kcmil (MCM)

Length 22-3/8" (568 mm)Weight 6.8 lbs. (3.1 kg)

*UL�and�cUL�classified�for�use�with�Anderson,�Blackburn,�FCI�Burndy,�ILSCO,�Panduit,�Penn-Union,�and�Thomas�&�Betts�copper�and�aluminum�color-coded�lugs�and�splices.�The�products�listed�above�are�registered�trademarks�of�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Penn-Union®�and�Thomas�&�Betts®.

Utility Dieless Crimping Tool


44999 44999 Utility Dieless Crimping Tool32891 32891 Pressure Test Kit includes 30 test slugs and gauge

sPECiFiCaTiOns

Capacity* Copper – 1/0 - 1000 kcmil (MCM) Aluminum – 1/0 - 1000 kcmil (MCM) For use with connectors up to a maximum of 1.895" (48 mm) diameter

Weight 16.5 lbs. (7.5 kg)

• Self-contained hydraulic crimper/press designed to crimp compression sleeves and lugs in underground applications.

• Dieless crimping head; no dies to lose or replace.• Automatic pressure setting, easy to use.• Two-speed pump for rapid ram advance, 15 ton (133.4 kN) maximum

crimping force.• Hinged head opens for easy loading and unloading.• Head rotates 180°.• Includes Pressure Test Kit and carrying case.


ire &

Cab

le T

erm

inat

ion

210

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

Crimping Dies for 4-Ton EK410L Tools 4-TOn CriMPinG diE kiT*

CaT. nO. uPC nO. dEsCriPTiOnKC4CU 02037 Complete Die Set for copper connectors. Includes dies for 8 AWG to

300 kcmil (MCM) copper connectors. (Dies can be stored in tool carrying case.)

KA4AL 12237 Complete die set for aluminum connectors. Includes dies for 8 AWG through 2/0 AWG. (Dies can be stored in tool carrying case.)

kC4 diEs FOr sErViCE EnTranCE COnnECTOrs


KD4-10 02021 Crimping Dies for 5/8" Service Entrance Connectors

KD4-840 02022 Crimping Dies for 840 Service Entrance Connectors

24163 24163 Blank Crimping Dies

CRIMPING DIES

*Note:�Connections�are�UL�and�cUL�classified�for�copper�and�aluminum�when�used�with�Anderson,�Blackburn,�FCI�Burndy,�ILSCO,�Panduit,�Thomas�&�Betts�and�Penn-Union�color-coded�lugs�and�splices.

diEs FOr CriMPinG COLOr-COdEd COPPEr & aLuMinuM LuGs & sPLiCEs*

aLuMinuM COPPEr CaBLE sizE CaT. nO. uPC nO. COLOr CaT. nO. uPC nO. COLOr 8 AWG KA4-8 12222 Blue KC4-8 02075 Red

6 AWG KA4-6 12223 Gray KC4-6 02076 Blue

4 AWG KA4-4 12225 Green KC4-4 02077 Gray

2 AWG KA4-2 12226 Pink KC4-2 02078 Brown

1 AWG KA4-1 12227 Gold KC4-1 02079 Green

1/0 AWG KA4-1/0 12228 Tan KC4-1/0 02080 Pink

2/0 AWG KA4-2/0 12229 Olive KC4-2/0 02081 Black

3/0 AWG — — — KC4-3/0 02082 Orange

4/0 AWG — — — KC4-4/0 02083 Purple

250 kcmil (MCM) — — — KC4-250 02084 Yellow

300 kcmil (MCM) — — — KC4-300 10988 White

www.greenlee.comW


211

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


Crimping Dies for 6-Ton ToolsAll dies on this page for use with EK628L, ECCXL, and EK622L tools.

6-TOn CriMPinG kiTs*

CaT. nO. uPC nO. dEsCriPTiOnK22S1GL 03078 Die Kit for 8 AWG to 600 kcmil Copper Connectors –

Includes all copper die sets listed below and carrying case

KD06AL 01631 Die Kit for 8 AWG to 350 kcmil Aluminum Connectors – Includes all aluminum die sets listed below and carrying case

diEs FOr CriMPinG COLOr-COdEd COPPEr & aLuMinuM LuGs & sPLiCEs* (require ua22 adapter when used with ECCXL, hCCX, & rCCX tools) 22 sEriEs CriMPinG diEs

aLuMinuM COPPEr CaBLE sizE CaT. nO. uPC nO. COLOr CaT. nO. uPC nO. COLOr 8 AWG KA22-8 06744 Blue KC22-8 03079 Red





1/0 AWG KA22-1/0 06750 Tan KC22-1/0 03084 Pink


3/0 AWG KA22-3/0 06752 Ruby KC22-3/0 03086 Orange

4/0 AWG KA22-4/0 06753 White KC22-4/0 03087 Purple

250 kcmil (MCM) KA22-250 06754 Red KC22-250 03088 Yellow

300 kcmil (MCM) KA22-300 06755 Blue KC22-300 03089 White

350 kcmil (MCM) KA22-350 06756 Brown KC22-350 03090 Red

400 kcmil (MCM) — — — KC22-400 03091 Blue

500 kcmil (MCM) — — — KC22-500 03092 Brown

600 kcmil (MCM) — — — KC22-600B 03094 Green

*Note:�Connections�are�UL�and�cUL�classified�for�copper�and�aluminum,�when�used�with�Greenlee�tools�on�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Thomas�&�Betts®�and�Penn-Union®�color-coded�lugs�and�splices.

diEs FOr usE WiTh sErViCE EnTranCE COnnECTOrs, C-TaPs, h-TaPs, OVErhEad and undErGrOund COnnECTOrs (require uaW adapter when used with ECCXL tools, requires CJd3, CJd3BG, or CJd30 jaws when used with Ek628L tools) “W”-sTyLE diEs

CaT. nO. uPC nO. Burndy nO. CaT. nO. uPC nO. Burndy nO. KD6-10 10165 W-BG KD6-18 10173 W-166

KD6-11 10166 W-O KD6-19 10174 W-243

KD6-12 10167 W-C KD6-20 10175 W-247

KD6-13 10168 W-K840 KD6-21 10176 W-249

KD6-14 10169 W-161 KD6-22 10177 W-164

KD6-15 10170 W-162 KD6-24 10179 W-237

KD6-16 10171 W-163 KD6-25 10180 W-239

KD6-17 10172 W-165 KD6-27 10182 W-28K


ire &

Cab

le T

erm

inat

ion

212

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

Crimping Dies for 12-Ton ToolsAll dies on this page for use with EK1230L, EK1240L, HK1230, HK1240, RK1240, HKL1232, and E12CCX tools, and RK1550 equipped with 48802 die adapter.

12-TOn CriMPinG kiTs

“u” sTyLE diE kiTs

CaT. nO. uPC nO. dEsCriPTiOnKD12CU 10260 Die Kit for 6 AWG to 750 kcmil Copper Connectors –

Includes all copper die sets below except KC12-8

KD12AL 10261 Die Kit for 6 AWG to 750 kcmil Aluminum Connectors – Includes all aluminum die sets below except 35776.

diEs FOr CriMPinG COLOr-COdEd COPPEr & aLuMinuM LuGs & sPLiCEs “u” sTyLE diEs

aLuMinuM** COPPEr* CaBLE sizE CaT nO. uPC nO. COLOr CaT nO. uPC nO. COLOr 8 AWG KA12-8 22084 Blue KC12-8 10996 Gray





1/0 AWG KA12-1/0 22089 Tan KC12-1/0 11004 Pink


3/0 AWG KA12-3/0 22121 Ruby KC12-3/0 11010 Orange

4/0 AWG KA12-4/0 22122 White KC12-4/0 11011 Purple

250 kcmil (MCM) KA12-250 22123 Red KC12-250 11012 Yellow

300 kcmil (MCM) KA12-300 22124 Blue KC12-300 11013 White

350 kcmil (MCM) KA12-350 22125 Brown KC12-350 11014 Red

400 kcmil (MCM) KA12-400 22126 Green KC12-400 11015 Blue

500 kcmil (MCM) KA12-500 22127 Pink KC12-500 11016 Brown

600 kcmil (MCM) KA12-600 22128 Black KC12-600 11018 Green

750 kcmil (MCM) KA12-750 22129 Yellow KC12-750 11020 Black

diEs FOr usE WiTh sErViCE EnTranCE COnnECTOrs, C-TaPs, h-TaPs, OVErhEad and undErGrOund COnnECTOrs addiTiOnaL “u”-sTyLE diEs

CaT. nO. uPC nO. Burndy nO. CaT. nO. uPC nO. Burndy nO. KD12-10 10188 U-BG KD12-30 10200 U-D3

KD12-11 10189 U-O KD12-32 10202 U-F

KD12-12 10190 U-C KD12-33 10203 U-997

KD12-14 10192 U-161 KD12-35 10205 U-238

KD12-15 10193 U-162 KD12-36 10206 U-654

KD12-17 10195 U-165 KD12-37 10207 U-655

KD12-18 10196 U-166 KD12-38 10208 U-658

KD12-19 10197 U-243 KD12-39 10209 U-659

KD12-20 10198 U-247 KD12-40 10210 U-998

KD12-21 10199 U-249

*Connections�are�UL�and�cUL�classified�for�copper�connectors�when�used�with�Greenlee�tools�on�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Thomas�&�Betts®�and�Penn-Union®�color-coded�lugs�and�splices.

**Connections�are�UL�and�cUL�classified�for�aluminum�connectors�when�used�with�Greenlee�tools�on�Anderson®,�Blackburn®,�FCI�Burndy®,�ILSCO®,�Panduit®,�Thomas�&�Betts®�and�Penn-Union®�color-coded�lugs�and�splices.

KA12-500

KC12-250

www.greenlee.comW


213

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


Crimping Die Carrying Case


01082 01082 Crimping Die Carrying Case (dies not included)

• Holds 15 KC22, KA22, KC12, KA12 or “U” style crimping die sets.

Crimping Tool Load Cell• Test gauge measures the force output of Greenlee 1230 and 1240

crimping tools.• Includes test gauge and blank die set.


35887 35887 Crimping Tool Load Cell – 12 Ton

ACCESSORIES


ire &

Cab

le T

erm

inat

ion

214

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

sPECiFiCaTiOns EaC120 EaC230

input 120 V AC 60 Hz 150W 230 V AC 50 Hz 150W

Output 12 V DC 6.5A 12 V DC 6.5A

Weight 1.6 lb (0.7 kg) 1.6 lb (0.7 kg)

adaPTEr and sEnsinG uniT CharT

CriMPinG TOOL adaPTEr sEnsOr EK410L MA4 TF70

EK622L, MA22 TF70 All CCX Tools, EK628L

All 1230 and 1240 Tools MA120 TF130

HK12ID, EK12IDL MA12ID TF130

Crimping Tool Test Meter

• Electronically measures the force output of crimping tools.• Data can be transferred to computer files to develop tool histories.• To take measurements, one TC1KIT, one tool adapter and one

sensor are required.• TC1 is battery powered and can be used in remote locations.• Includes TC1 measuring unit, battery charger and carrying case.


TC1S KIT 01340 TC1 UnitMA4 02086 Adapter for EK410LMA22 06576 Adapter for EK622L, EK622L, CCX, EK628LMA50 11798 Adapter for EK210LMA120 06577 Adapter for 1230, 1240, E12CCX, E12CCXLMA12ID 24054 Adapter for EK12ID, EK12IDLTF70 06574 Sensor for EK210L, EK410L, EK622L, CCX, EK628LTF130 06575 Sensor for 1230, 1240, E12CCX, EK12ID, E12CCXL, EK12IDL

AC Adapters for Battery-Powered Tools

Battery Charger Adapter

• Operates all Greenlee 18V Li-ion battery-powered tools except the ES750, ES85, ES25 and ES1000.

• Easily converts Greenlee 18V Li-ion battery-powered tools to corded tools.

• Same physical size and shape as Greenlee18V Li-ion batteries, providing unlimited run-time without additional weight or bulk.

• Long 16.5 foot cord allows mobility. Can also be used with an extension cord.

• Provides the same power as a battery for consistent operating performance.

• Attaches to 52178, 52179 and 52180 Li-ion battery chargers• Allows chargers to charge Greenlee NiCd & NiMH 12 V and 9.6 V batteries

CaT. nO. uPC. nO. dEsCriPTiOn

EAC18120 52191 AC Adapter, 120 V to 18VEAC18230 52192 AC Adapter, 230 V to 18V

CaT. nO. uPC. nO. dEsCriPTiOn

25766 25766 Battery Charger Adapter

www.greenlee.comW


215

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


TOOL TyPE GrEEnLEE Burndy T & B iLsCO huskiE PanduiT BLaCkBurn kEarnEy PEnn-uniOn

Ek410L kC4, ka4 — — — — — — — —

Ek628L kC22, ka22 W, X8 6 TOn9 nd8 HT588 CD-20018 BY9 O9 —

Ek622L, KC22, KA22, KD6 W, X — ND HT58 CD-2001 — —

Ek622L CCX kC221, ka221, kd62 W2, X2 6 TOn3 nd2 hT3, HT582 CD-20012 BY3 O3 — 1230 KC12, “U” STYLE, KD12 U 15500 SERIES ILD HT41 CD-920 B, H — T 1240, 12CCX KC12, “U” STYLE, KD12 U 15500 SERIES ILD HT41 CD-920 B, H — T 1240k — — — — HTK — — PH2 — 1550 — P4, u5 15600 sEriEs6, iLd-P4, hT614, Cd-9404, 15600 sEriEs6, Ph27 — 15500 sEriEs5 iLd5 hT415 Cd-9205 B5, h5

k425BG, K06 W, X — ND HT58 CD-2001 — — —

k425ONotes:�BOLD�indicates�that�use�of�the�proper�die�adapter�is�needed.1�Use�UA22�die�adapters� 2�UAW�die�adapters� 3�Use�UAK�die�adapters� 4�Use�48820�die�adapters� 5�Use�48802�die�adapters� 6�Use�48788�die�adapters� 7�Use�48824�die�adapters8�Use�CJD30�or�CJD3BG�Jaws� 9�Use�CJK�Jaws

ECCXL, Ek622L, Ek628L CaBLE sizE COLOr COdE GrEEnLEE1 Burndy2 T & B3 iLsCO2 huskiE2 PanduiT2 BLaCkBurn3

8 AWG Red KC22-8 W8CVT 6TON21 CD-2001-8 BY15C W8CRT X8CRT 6 AWG Blue KC22-6 W5CVT 6TON24 CD-2001-6 BY17C W5CRT X5CRT X8CART 5 AWG Blue NA W5CVT W5CRT X5CRT 4 AWG Gray KC22-4 W4CVT 6TON29 CD-2001-4 BY19C W4CRT X4CRT 3 AWG White NA W3CRT 2 AWG Brown KC22-2 W2CVT 6TON33 CD-2001-2 BY21C W2CRT X2CRT 1 AWG Green KC22-1 W1CVT 6TON37 CD-2001-1 BY53C X1CRT-1 W1CRT-1 1/O AWG Pink KC22-1/0 W25VT 6TON42 CD-2001-1/0 BY23C W25RT X25RT 2/O AWG Black KC22-2/0 W26VT 6TON45 CD-2001-2/0 BY28C W26RT X26RT 3/O AWG Orange KC22-3/0 W27VT 6TON50 CD-2001-3/0 BY25C W27RT X27RT 4/O AWG Purple KC22-4/0 W28VT 6TON54 CD-2001-4/0 BY31C W28RT X28RT 250 kcmil (MCM) Yellow KC22-250 W29VT 6TON62 CD-2001-250 BY27C W29RT X29RT 300 kcmil (MCM) White KC22-300 W30VT 6TON66 CD-2001-300 BY35C W30RT 350 kcmil (MCM) Red KC22-350 W31VT 6TON71 CD-2001-350 BY37C W31RT 400 kcmil (MCM) Blue KC22-400 W32VT 6TON76 CD-2001-400 W32RT 500 kcmil (MCM) Brown KC22-500 W34VT 6TON87 CD-2001-500 W34RT 600 kcmil (MCM) Green KC22-600

Crimping Die Cross Reference – Copper Color-Coded Lugs and Splices for 6-Ton Crimping Tools

Competitive Die CompatibilityAll Dies Listed may be used with the appropriate Greenlee Tools

REFERENCE

Notes�for�6-ton�dies:��1�Can�be�used�with�22�Series,�CCX�and�EK628L�tools.�Use�UA22�die�adapters�with�CCX.�Use�without�adapters�with�22�Series�and�EK628L.2�Can�be�used�with�22�Series,�CCX�and�EK628L�tools.�Use�UAW�die�adapters�with�CCX.�Use�W�die�adapters�with�22�Series.�Use�with�CJ03�jaws�with�EK628L.��

3�Can�be�used�with�CCX�and�EK628L�tools�only.�Cannot�be�used�with�22�Series�tools.�Use�UAK�die�adapters�with�CCX.�Use�with�CJK�jaws�with�EK628L.��


ire &

Cab

le T

erm

inat

ion

216

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

aLL 1230, 1240 & E12CCXL TOOLs* CaBLE sizE COLOr COdE GrEEnLEE Burndy T & B iLsCO huskiE PanduiT BLaCkBurn PEnn-uniOn

8 AWG Red KC12-8 U8CRT 15520 ILD-1 CD-920-8 B71CH

6 AWG Blue KC12-6 U5CRT 15522 ILD-2 HT41AT CD-920-6 B73CH T-7/374 U8CABT

5 AWG Blue U5CRT

4 AWG Gray KC12-4 U4CRT 15527 ILD-3 HT41AU CD-920-4 B74CH T-8/346 U6CABT

3 AWG White NA U3CRT

2 AWG Brown KC12-2 U2CRT 15528 ILD-4 HT41AW CD-920-2 B75CH T-9

1 AWG Green KC12-1 U1CRT 15513 ILD-4 HT41AX CD-920-1 B05CH T-10 4UCABT

1/O AWG Pink KC12-1/0 U25RT 15508 ILD-5 HT41AY CD-920-1/0 B06CHI T-11/375 U2CABT

2/O AWG Black KC12-2/0 U26RT 15526 ILD-6 HT41AZ CD-920-2/0 B72CH T-12/348

3/O AWG Orange KC12-3/0 U27RT 15530 ILD-9 HT41BA CD-920-3/0 B08CH T-13

4/O AWG Purple KC12-4/0 U28RT 15511 ILD-10 HT41BC CD-920-4/0 B09CH T-14

250 kcmil (MCM) Yellow KC12-250 U29RT 15510 ILD-11 HT41BE CD-920-250 B26CH T-15

300 kcmil (MCM) White KC12-300 U30RT 15534 ILD-12 HT41BF CD-920-300 B10CH T-16 U28ART

350 kcmil (MCM) Red KC12-350 U31RT 15512 ILD-13 HT41BJ CD-920-350 B11CH T-17 U29ART

400 kcmil (MCM) Blue KC12-400 U32RT 15512 ILD-14 HT41BK CD-920-400 B11CH T-18/324 U30ART

500 kcmil (MCM) Brown KC12-500 U34RT 15506 ILD-15 HT41BL CD-920-500 B12CH T-19/470 U31ART

600 kcmil (MCM) Green KC12-600 U36RT ILD-16 HT41BM CD920-600 B36CH T-20/299 U32ART

700 kcmil (MCM) Pink NA U38RT 15505 ILD-16 T-20/299

750 kcmil (MCM) Black KC12-750 U39RT 15515 ILD-17 HT41BP CD-920-750 B29CH T-22/472

Notes�for�all�12-ton�dies:�*�All�12-ton�dies�shown�can�be�used�with�all�1230,�1240�and�12CCX�Greenlee�tools�up�to�the�capacity�limits�of�the�tool.

Crimping Die Cross Reference – Copper Color-Coded Lugs and Splices for 12-Ton Crimping Tools

www.greenlee.comW


217

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


ECCXL, Ek622L, & Ek628L CaBLE sizE COLOr COdE GrEEnLEE1 Burndy2 T & B3 iLsCO2 huskiE2 PanduiT2 BLaCkBurn3

8 AWG Blue KA22-8 X8CART 6TON24 BY17C

6 AWG Gray KA22-6 X6CART 6TON29 CD-2001-4 BY19C

4 AWG Green KA22-4 X4CART 6TON37 CD-2001-1 BY53C

2 AWG Pink KA22-2 X2CART 6TON42 CD-2001-1/0 BY23C

1 AWG Gold KA22-1 X1CART 6TON45 CD-2001-2/0 BY24C

1/O AWG Tan KA22-1/0 X25ART 6TON50 CD-2001-3/0 BY25C

2/O AWG Olive KA22-2/0 X26ART 6TON54 CD-2001-4/0 BY31C

3/O AWG Ruby KA22-3/0 X27ART 6TON60 CD-2001-250 BY32C

4/O AWG White KA22-4/0 X28ART 6TON66 CD-2001-300 BY35C

250 kcmil (MCM) Red KA22-250 6TON71 CD-2001-350 BY37C

300 kcmil (MCM) Blue KA22-300 6TON76 CD-2001-400 BY35C

350 kcmil (MCM) Brown KA22-350 6TON87 BY37C

Notes�for�6-ton�dies:1�Can�be�used�with�22�Series,�CCX�and�EK628L�tools.�Use�UA22�die�adapters�with�CCX.�Use�without�adapters�with�22�Series�and�EK628L.2�Can�be�used�with�22�Series,�CCX�and�EK628L�tools.�Use�UAW�die�adapters�with�CCX.�Use�with�W�die�adapters�with�22�Series.�Use�CJ03�jaws�with�EK628L.3�Can�be�used�with�CCX�and�EK628L�tools.�Cannot�be�used�with�22�Series�tools.�Use�UAK�die�adapters�with�CCX.�Use�CJK�jaws�with�EK628L.

aLL 1230, 1240 & 12CCX TOOLs* CaBLE sizE COLOr COdE GrEEnLEE Burndy T & B iLsCO huskiE PanduiT BLaCkBurn PEnn-uniOn

8 AWG Blue KA12-8 U8CABT 15522 ILD-2 HT41GL B73CH T-7/374

6 AWG Gray KA12-6 U6CABT 15527 ILD-3 HT41GE CD-920-4 B74CH T-8/346

4 AWG Green KA12-4 U4CABTQ 15513 ILD-4 HT41GM CD-920-1 B05CH T-11/375

2 AWG Pink KA12-2 U2CABT 15508 ILD-7 HT41GF CD-920-1/0 B06CHI T-12/348

1 AWG Gold KA12-2 U1CART 15526 ILD-7 CD-920-2/0 B06CHI T-471

1/O AWG Tan KA12-1/0 U25ART 15530 ILD-8 HT41EX CD-920-3/0 B06CH T-296

2/O AWG Olive KA12-2/0 U26ART 15511 ILD-10 HT41EY CD-920-4/0 B09CH T-297

3/O AWG Ruby KA12-3/0 U27ART 15532 ILD-10 HT41GW CD-920-250 B26CH T-467

4/O AWG White KA12-4/0 U28ART 15534 ILD-12 HT41EZ CD-920-300 B10CHI T-298

250 kcmil (MCM) Red KA12-250 U29ART 15514 ILD-13 HT41FW CD-920-350 B11CH T-18/324

300 kcmil (MCM) Blue KA12-300 U30ART 15512 ILD-14 HT41GZ CD-920-400 B11CH T-19/470

350 kcmil (MCM) Brown KA12-350 U31ART 15506 ILD-14 HT41FA CD-920-500 B12CHI T-20/299

400 kcmil (MCM) Green KA12-400 U32ART 15536 ILD-16 HT41HH CD-920-600 B36CH T-22/472

500 kcmil (MCM) Pink KA12-500 U34ART 15505 ILD-16A HT41FB CD-920-500A B76CH T-300

600 kcmil (MCM) Black KA12-600 U36ART 15515 ILD-17 HT41HG CD920-750 T-24/473

700 kcmil (MCM) Yellow U39ART ILD-17 HT41IJ

750 kcmil (MCM) Yellow KA12-750 U39ART 15504 ILD-18 HT41IJ


Crimping Die Cross Reference – Aluminum Color-Coded Lugs and Splices for 12-Ton Tools

Crimping Die Cross Reference – Aluminum Color-Coded Lugs and Splices for 6-Ton Tools


ire &

Cab

le T

erm

inat

ion

218

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

CCX, Ek622L, Ek628L run TaP GrEEnLEE1 Burndy2 T & B3 iLsCO2 huskiE2 PanduiT2 BLaCkBurn3

10 AWG 10AWG W238 HT58DG

8 AWG 8 AWG KD6-15 W162 HT58BZ BY21

4-6 AWG 8 AWG KD6-10 WBG ND-BG HT58G CD-2001-BG BY31



2-3 AWG 4-8 AWG KD6-12 WC ND-C HT58J CD-2001-C BY33

2-3 AWG 2-3 AWG KD6-12 WC ND-C HT58J CD-2001-C BY33

1/O-2/O AWG 8-2 AWG KD6-11 WO HT58AK OJB

1/O-2/O AWG 1/0-2/0 AWG KD6-11 WO HT58AK OJB

3/O-4/O AWG 6-2 AWG D34 DBL

3/O-4/O AWG 1/0-2/0 AWG D34

3/O-4/O AWG 3/0-4/0 AWG D34

Notes�for�6-ton�dies:1�Can�be�used�with�22�Series,�CCX�and�EK628L�tools.�Use�UAW�die�adapters�with�CCX.�Use�D3�adapters�with�22�Series.�Use�CJD3�jaws�with�EK628L.2�Can�be�used�with�22�Series,�CCX�and�EK628L�tools.�Use�UAW�die�adapters�with�CCX.�Use�D3�die�adapters�with�22�Series.�Use�CJD3�jaws�with�EK628L.3�Can�be�used�with�CCX�and�EK628L�tools.�Cannot�be�used�with�22�Series�tools.�Use�UAK�die�adapters�with�CCX.�Use�CJK�jaws�with�EK628L.4�Die�adapters�included�with�EK622L�have�D3�profile.��UAW�adapters�for�CCX�tools�have�D3�profile.�CJD3�jaws�for�EK628L�have�D3�profile.

Crimping Die Cross Reference – Copper C-Taps for Copper Cables

aLL 1230,1240 & 12CCX TOOLs* run TaP GrEEnLEE Burndy T & B iLsCO huskiE PanduiT BLaCkBurn PEnn-uniOn

10 AWG 10 AWG KD12-35 U238 HT41DG

8 AWG 8 AWG KD12-15 U162 HT41BZ B71AH

4-6 AWG 8 AWG KD12-10 UBG HT41G CD-920-BG B58CS T-BG



2-3 AWG 4-8 AWG KD12-12 UC ILD-C HT41J CD-920-C HKBC

2-3 AWG 2-3 AWG KD12-12 UC ILD-C HT41J CD-920-C HKBC

1/0-2/0 AWG 8-2 AWG KD12-11 UO ILD-O HT41AK HO T-O

1/0-2/0 AWG 1/0-2/0 AWG KD12-11 UO ILD-O HT41AK HO T-O

3/0-4/0 AWG 6-2 AWG KD12-30 UD3 ILD-D3 HT41X CD-920-D3 HD T-D3

3/0-4/0 AWG 1/0-2/0 AWG KD12-30 UD3 ILD-D3 HT41X CD-920-D3 HD T-D3

3/0-4/0 AWG 3/0-4/0 AWG KD12-30 UD3 ILD-D3 HT41X CD-920-D3 HD T-D3


Crimping Die Cross Reference – Copper C-Taps for Copper Cables

www.greenlee.comW


219

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


Ratchet Cable Bender

sPECiFiCaTiOns

Capacity Up through 500 kcmil (MCM) (240 mm²), 600 volt, copper or aluminum cable

Weight 8.2 lbs. (3.7 kg)

Hydraulic Cable Bender

sPECiFiCaTiOns

Capacity 350 - 1000 kcmil (MCM) (185-500 mm²), 600 volt 350 - 750 kcmil (MCM) compact cable

Weight 800 – 7 lbs. (3.2 kg), 802 – 26 lbs. (11.8 kg) 800F1725 – 36 lbs. (16.4 kg)

• Simplifies and speeds cable installation.• 10" (254 mm) ratchet extension is furnished to simplify

bending in deep enclosures.• Includes ratchet wrench, L-wrench, ratchet extension,

bending shoe assembly and storage box.

• One-shot bends up to 90°; automatically unloads cable.• Compact design bends in tight places.• Unit with foot pump keeps both hands free to hold cable.

CABLE BENDING TOOLS


796 22590 Ratchet Cable Bender22578 22578 Ratchet Wrench with Grip22579 22579 L-Wrench with Grip22682 22682 10" (254 mm) Ratchet Extension22934 22934 Bending Shoe30236 30236 Storage Box


800 23892 Hydraulic Cable Bender only802 24395 Hydraulic Cable Bender with High Pressure Hose Unit

and Storage Box800F1725 23893 Hydraulic Cable Bender with 1725 Foot Pump, High

Pressure Hose Unit and Storage Box37729 37729 High Pressure Hydraulic Hose 1/4" x 10' (6.4 mm x 3 m)1725 31353 Hydraulic Foot Pump23955 23955 Metal Storage Box

800F1725


ire &

Cab

le T

erm

inat

ion

220

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

Cable Stripping Tool


1903 12679 Cable Stripping Tool13544 13544 Replacement Blade (2 per package)

sPECiFiCaTiOns

Capacity THHN Cable Size Range: 8AWG to 1250 kcmil (10-625 mm2)Overall Cable Diameter: 0.18" to 1.57" (4.5-40.0 mm)Cable Diameter Using Small Cable Guide Hook: 0.18" to 0.98" (4.5-25.0 mm)Cable Diameter Using Large Cable Guide Hook: 0.79" to 1.57" (20.0-40.0 mm)

Weight .25 lbs (0.1 g)

• Triple action stripping – rotary, linear, and spiral – “Window” stripping is accomplished by combining 2 rotary cuts with a spiral cut in between them.

• Eliminates Cable Scoring. Blade height is adjustable to precisely match insulation thickness

• Interchangeable cable guides for small and large cable diameters• Hook on the cable guide is used to start jacket removal without the

need to use a screwdriver or pliers• Replacement blade storage pocket in the base of the tool• Long life, high-carbon steel blade• Ergonomic handle shape• Suitable for most jacket materials

WIRE AND CABLE STRIPPING TOOLS

Adjustable Cable Stripper

sPECiFiCaTiOns

Capacity 1/0 - 1000 kcmil (MCM) (50 - 500 mm² diameter); insulation rated 600 VAC Nominal

Weight .9 lb. (408 g)

• For mid-span and end termination. Strips TW, THW, THWN, THHN and similar single-layer insulation.

• Fast-close jaws. Quick size and insulation adjustments.• Snap action for same cutting depth time after time.


1905 21533 Adjustable Cable Stripper21978 21978 Blade

Kwik Stripper® Heavy-Duty Wire Stripper• 18-6 AWG (1.0-4.1 mm dia.) stripping capacity.• Front entry jaws for easy access to boxes, panels and tight spaces.• Quick and easy adjustments.• Tough metal alloy construction.


45019 45019 Kwik Stripper Heavy-Duty Wire Stripper45020 45020 Heavy-Duty Jaws

www.greenlee.comW


221

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


Kwik Stripper® Wire Stripper

Automatic Wire Stripper

• 34-10 AWG (.08-6mm²) stripping capacity.• 12 AWG (4 mm²) solid, 10 AWG (6 mm²) stranded cutting capacity.• Strips and cuts flat and round cable.• Self-adjusts to different wire gauges.• Contoured and cushioned handles.• Front entry jaws have an adjustable strip length guide. • Lightweight reinforced nylon is chemical and corrosion resistant.

• Production grade wire stripper strips insulation from most smaller gauge wire.

• Strips up to 7/8" (22.2 mm) length.• Strips PVC and THHN insulation.• For use with solid and stranded wire.


45000 45000 Kwik Stripper Wire Stripper20243 20243 Blade Cassette

sPECiFiCaTiOns

Capacity 20 - 10 AWG (.5 mm² - 6 mm²) with PVC or THHN insulationWeight .7 lb. (300 g)


1935 37600 Automatic Wire Stripper

Gator® Terminal Crimping Tool• Intelligent Crimping System Technology includes a pressure sensor that monitors the

crimping force of each crimp and provides the operator a visual and audible alert if the force is below specifications.


• LED light provides the operator with the battery charge and tool maintenance status.• In line tool style is light weight and very easy to control• One trigger controls all tool functions.• Crimping head rotates 350°• Tools automatically retract when the crimping or cutting cycle is complete• Overmolded tacky grip areas make gripping the tool easier and more comfortable.• LED work light illuminates dark work areas.• Greenlee battery-powered crimping tools now use bio-degradable oil.• Smart chargers control the charging current, charging voltage and battery temperature

to maximize battery life• Uses all Kwik Cycle 9 crimping dies.• Available with 120V, 12V or 230V battery charger or with 120V or 230V corded adapter

in place of batteries and charger

sPECiFiCaTiOns

Capacity Uses Kwik Cycle 9 Die SetsLength 12-3/4" (324 mm)Weight 3-1/2 lb. (1.6 kg)Battery 18V 1.5 Ah Li-ionCrimping Force 2,900 lb. (13kN)Width 2-7/8" (73 mm)Crimp Cycle Time ~2 secondsBattery Charge Time 30 minutesEst. Cycles per Charge 400

WIRE CRIMPING TOOLS


EK210L11 52079 1.5-Ton Battery-Powered Crimping Tool w/120 volt chargerEK210L12 52080 1.5-Ton Battery-Powered Crimping Tool w/12 volt chargerEK210L22 52081 1.5-Ton Battery-Powered Crimping Tool w/230 volt chargerEK210L120 52082 1.5-Ton Crimping Tool w/120V AC AdapterEK210L230 52083 1.5-Ton Crimping Tool w/230V AC Adapter52177 52177 18V 1.5 Ah Li-ion25752 25752 Carrying Case52178 52178 120V Charger52179 52179 12V Charger52180 52180 230V Charger

.51


ire &

Cab

le T

erm

inat

ion

222

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

Kwik Cycle® 9• Frames are manufactured from heat-treated, hardened tool steel for

superior life and function.• Tools feature a precision, full-cycle ratchet for accurate, repeatable

crimps every cycle.• Crimping dies are manufactured from hardened, heat-treated tool

steel for superior life.• Tension adjustment preset at the factory for optimum performance.• Higher leverage force and ergonomically designed handle for

improved comfort.• Ideal for field installation of connectors as well as shop use.• Die sets are easily interchangeable using a screwdriver.• Uses all Kwik Cycle 9 crimping dies (see below.

sPECiFiCaTiOns

Capacity Uses Kwik Cycle 9 Die SetsWeight 1.1 lb. (500 g)


45504 45504 Kwik Cycle 9" Crimp Frame

Kwik Cycle® 9

INTERChANgEABLE DIE SETS FOR INSuLATED AND NON-INSuLATED TERMINALS

CAT./uPC NO. CONNECTION DESCRIPTION

22-10AWG Colorcodednestsforeasyidentification Standardinsulatedterminals,ringtongue,spadelug,slideonandbuttsplices

22-10AWG Colorcodednestsforeasyidentification Forfullyinsulatedslideonstyleconnectors AMPUltrafast™style

26-16AWG Forminiinsulatedterminalswithsmallerwirebarrels Ringtongue,spade,slideonandbuttsplices 22-10AWG Fornon-insulatedterminalsandsplices

26-10AWG Fornon-insulatedandinsulatedwireferrules 8-4AWG Fornon-insulatedandinsulatedwireferrules

- KWIK CYCLE 9 TOOL W/ DIE 45500 - DIE ONLY 45509



- DIE ONLY 45565

- DIE ONLY 03284

- DIE ONLY 03283

Note: Other dies see page 215.

www.greenlee.comW


223

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


Kwik Cycle® Crimping Tool

Terminal Crimping Tool

Premium Terminal Crimping Tool

• For non-insulated terminals.• Includes ratchet mechanism which releases only after full crimp cycle

is completed.

• Two die positions permit the KP1022 to crimp both insulated and uninsulated terminals and splices.

• Forged steel and hardened design provides long life.• Smooth pivot action allows tool to easily be used with one hand.• Double-cushioned handle grips on the KP1022 are easy on the hands.• Standard handle grips on the KP1022D make it easy to slip in/out of tool

pouches.• Precision machined and hardened cutter blades make wire cutting easy.

• Storage for two sets of crimping dies in the handles• No tools needed to change dies• Precision mechanism for smooth crimping cycles• Hardened mechanism components for long term durability• Cushioned handles for comfort• Full cycle mechanism assures complete crimps, but tool can be opened in mid-cycle if necessary• Equipped with 3 crimping die sets for 22-10 AWG insulated terminals (red, yellow, blue), 22-10 AWG uninsulated terminals, and 26-8 AWG wire ferrules


K2-1BGL 02632 Kwik Cycle Crimping Tool


KP1022 02155 Terminal Crimping Tool with molded gripKP1022D 10633 Terminal Crimping Tool with dipped grip


K210 10872 Crimping Tool with 10873, 10874 and 10875 die sets10873 10873 DieSet,22-10AWGInsulatedTerminals10874 10874 DieSet,22-10AWGUninsulatedTerminals10875 10875 DieSet,26-8AWGWireFerrules10876 10876 DieSet,RG58/59/62/7110877 10877 DieSet,20-10AWGOpenBarrelConnectors

sPECiFiCaTiOns

Capacity 22 AWG - 6 AWGLength 12.8" (325 mm)Weight .3 lbs. (136 g)

sPECiFiCaTiOns

Overall Length 9-1/2" (241 mm)Weight 1.05 lbs. (.48 kg)Capacity Insulated Terminals & Splices - 10 - 22 AWG

Uninsulated Terminals & Splices - 10 - 22 AWG

sPECiFiCaTiOns

Length 9" (23 cm)Weight 1.35 lbs. (.6 kg)Crimping dies included

22-10 AWG Insulated Terminals22-10 AWG Uninsulated Terminals26-8 AWG Wire Ferrules

KP1022

KP1022d


ire &

Cab

le T

erm

inat

ion

224

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

EDAC/ELCO Crimper

Crimptoolforbroadcastprofessionalsterminatingloose28-18AWG(.08-75mm2)EDACandELCOrackandpanelopenbarrelcontacts.• CrimpsEDACpins516-290-590&516-290-591alongwithELCOpins

000-60-8017-03-13• Embeddedpinlocatorsproperlyalignpinstoensureaccurate,reliable

crimping• Fully-ratchetedtopreventundercrimping• Requireslowhandforceandprovidessuperiorcrimpforce• Trueergonomicdesignforextremecomfortandperformance• Non-slip,softrubberhandles• Double-platedforextendedlong-lifeandcrimpingaccuracy• Factory-calibratedandsetforprecision

CAT. NO. DESCRIPTION

PA1670 EDAC/ELCOCrimper

SPECIFICATIONS

Weight 19oz.(538g)

SPECIFICATIONS

Weight 8oz.(227g)

SPECIFICATIONS

Weight 14oz.(400g)Range Small: 30-24 AWG (0.05-.20 mm2)

Medium: 22-18 AWG (.34-.75 mm2)

Open Barrel Contact Pin Crimper

Professionalcrimpingtoolforopen-barrelboxandroundconnectorcontactswithawirerangeof30-18AWG(0.05-.75mm2)• Precisionfixeddual-platediesforcrimpaccuracy• Crimpsnon-insulatedterminallugs,cablelugsandparallelandserial

splicesor“F-Type”• WorkswithMolex,Waldom&Leoco-typeconnectors• Durablesteelconstructionforlonglife• Rubber-embeddedergonomichandlesforlow-effortoperation


PA1645 OpenBarrelContactPinCrimper

Pinlocators

Electrical Terminal Crimper

• Heavy-dutycrimperforD-sub26-28AWGpinsandsockets;22-26AWGbutt-insulatedconnectors;22-26AWGtelephonepiercingspadelugs;and14-18,20-22AWGopenbarrelconnectors.

• Built-inwirecutter• Dual-durometergripsforimprovedcomfortandcontrol.


PA1176 ElectricalTerminalCrimper

www.greenlee.comW


225

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


SPECIFICATIONS


Medium: 18-14 AWG (.34-.75 mm2)

Open Barrel Contact Pin CrimperProfessionalcrimpingtoolforopen-barrelboxandroundconnectorcontactswithawirerangeof24-14AWG(0.2-2.5mm2)• Precisionfixeddual-platediesforcrimpaccuracy• Built-inlocator• Crimpsnon-insulatedterminallugs,cablelugsandparalleland

serialsplicesor“F-Type”• WorkswithMolex,Waldom&Leoco-typeconnectors• Durablesteelconstructionforlonglife• Rubber-embeddedergonomichandlesforlow-effortoperation


PA1631 OpenBarrelContactPinCrimper

Crimpingtoolfor4-or8-indentcrimpingofclosed-barrelD-subcontacts.• Dual-durometergripsprovidecomfortandcontrol.• 4-IndentcrimperforAWG26-20(0.14-0.50mm2)D-subcontacts(P/N1460)• 4-IndentcrimperforAWG20-12(0.50-4.0mm2)D-subcontacts(P/N1461)• 8-IndentcrimperforAWG26-20(0.14-0.50mm2)D-subcontacts(P/N1462)• Adjustablepinheightlocator(P/Ns1460and1462only)


PA1460PA1461PA1462

D-sub4-Indentcrimper(26-20AWG)D-sub4-Indentcrimper(20-12AWG)D-sub8-Indentcrimper(26-20AWG)

SPECIFICATIONS

Weight 11oz.(312g)

D-Sub Indent Crimpers

Notforuseonhardenedsteel,brassorphosphorbronzecontacts

Open Barrel D-Sub Contact Pin CrimperProfessionalcrimpingtoolforopen-barrelD-subcontactswithawirerangeof28-20AWG(.08-0.50mm2)• CrimpsstandardD-subcontacts• Precisionfixeddual-platediesforcrimpaccuracy• Built-incontactlocator• Durablesteelconstructionforlonglife• Ergonomichandlesforlow-effortoperation


PA1646 OpenBarrelD-SubContactPinCrimper

SPECIFICATIONS


Medium: 22-20 AWG (.34-.50 mm2)


PA1618 HTN21LNon-InsulatedTerminalCrimper

Non-Insulated Terminal Crimper Professionalcrimpingtoolfornon-insulatedterminallugswithawirerangeof20-10AWG(0.5–6.0mm2).• Fixedsteeldiesystem• Built-interminallocator• Crimpsnon-insulatedterminallugs,cablelugsandparalleland

serialsplices• Durablesteelconstructionforlonglife• Ergonomichandlesforlow-effortoperationSPECIFICATIONS

Weight 13.5oz.(380g)Range Small: 28-24 AWG (0.5 - 1.5 mm2)

Medium: 16-14 AWG (1.5 - 2.5 mm2)Large: 12-10 AWG (4.0 - 6.0 mm2)


ire &

Cab

le T

erm

inat

ion

226

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

Non-Insulated Wire Ferrules• For terminating stranded wire into terminal blocks.• Electrolytic copper and tin plating provide maximum conductivity

and low contact resistance.• Meets DIN 46228, part 1, 0.5 - 50 mm2.

sPECiFiCaTiOns

Material Copper surface Tin plated

COnduCTOr sizE CaTaLOG uPC diMEnsiOn L rECOMMEndEd aWG (mm2) nuMBEr COdE inChEs (mm) CriMPinG TOOLs

24 - 23 69 / 5VZ* 04989 .197 (5) K1GL, K32GL, (0.25) 69 / 7VZ* 04990 .276 (7) K30GL, Die 03283

22 70 / 5VZ* 04991 .197 (5) K1GL, K32GL, (0.34) 70 / 7VZ* 04992 .276 (7) K30GL, Die 03283

20 71S / 6VZ 04993 .236 (6) K1GL, K32GL, (0.5) 71S / 8VZ* 04994 .315 (8) K36GL, K30GL, 71S / 10VZ 04995 .394 (10) Die 03283

18 71 / 6VZ 04996 .236 (6) K1GL, K32GL, (0.75) 71 / 8VZ* 04997 .315 (8) K36GL, K30GL, 71 / 10VZ 04998 .394 (10) Die 03283 71 / 15VZ* 04999 .591 (15)

18 - 17 72S / 6VZ 05000 .236 (6) K1GL, K32GL, (1) 72S / 8VZ* 05001 .315 (8) K36GL, K30GL, 72S / 10VZ 05002 .394 (10) Die 03283 72S / 12VZ* 05003 .471 (12) 72S / 15VZ* 05004 .591(15)

16 72 / 7VZ 05005 .276 (7) K1GL, K32GL, (1.5) 72 / 10VZ 05006 .394 (10) K36GL, K30GL, 72 / 12VZ 05007 .471 (12) Die 03283 72 / 15VZ* 05008 .591 (15) 72 / 18VZ 05009 .709 (18) 72 / 20VZ* 05010 .787 (20)

14 73 / 7VZ 05011 .276 (7) K1GL, K32GL, (2.5) 73 / 10VZ 05012 .394 (10) K36GL, K30GL, 73 / 12VZ 05013 .471 (12) Die 03283 73 / 15VZ* 05014 .591 (15) 73 / 18VZ 05015 .709 (18)

12 74 / 9VZ 05016 .354 (9) K32GL, K36GL, (4) 74 / 12VZ 05017 .471 (12) K30GL, 74 / 15VZ 05018 .591 (15) Die 03283 74 / 18VZ 05019 .709 (18) 74 / 20VZ* 05020 .787 (20)

10 75 / 10VZ 05021 .394 (10) K32GL, K34GL, (6) 75 / 12VZ 05022 .471 (12) K36GL, K30GL, 75 / 15VZ 05023 .591 (15) Die 03283 75 / 18VZ 05024 .709 (18) 75 / 20VZ* 05025 .787 (20) 75 / 25VZ* 05026 .984 (25)

8 76 / 12VZ 05027 .471 (12) K28GL, K34GL, (10) 76 / 15VZ 05028 .591 (15) Die 03284 76 / 18VZ 05029 .709 (18) 76 / 20VZ* 05030 .787 (20) 76 / 25VZ* 05031 .984 (25)

COnduCTOr sizE CaTaLOG uPC diMEnsiOn L rECOMMEndEd aWG (mm2) nuMBEr COdE inChEs (mm) CriMPinG TOOLs

6 77 / 12VZ 05032 .471 (12) K28GL, K34GL, (16) 77 / 15VZ 05033 .591 (15) Die 03283 77 / 18VZ 05034 .709 (18) 77 / 20VZ* 05035 .787 (20) 77 / 25VZ 05036 .984 (25) 4 78 / 12VZ* 05038 .471 (12) K28GL, (25) 78 / 15VZ 05039 .591 (15) Die 03284 78 / 20VZ* 05041 .787 (20) 78 / 25VZ 05042 .984 (25) 78 / 28VZ* 05043 1.102 (28)

2 79 / 15VZ* 05044 .591 (15) K28GL (35) 79 / 18VZ 05045 .709 (18) 79 / 22VZ* 05046 .866 (22) 79 / 25VZ 05047 .984 (25) 79 / 30VZ* 05048 1.181 (30)

1/0 80 / 18VZ 05049 .709 (18) K28GL, K29GL (50) 80 / 22VZ* 05050 .866 (22) 80 / 25VZ 05051 .984 (25) 80 / 30VZ* 05052 1.181 (30)

2/0 81 / 22VZ 05053 .866 (22) K29GL (70) 81 / 25VZ 05054 .984 (25) 81 / 30VZ 05055 1.181 (30)

3/0 82 / 25VZ 05056 .984 (25) K29GL (95) 82 / 30VZ 05057 1.181 (30) 82 / 32VZ 05058 1.260 (32) 82 / 34VZ 05059 1.339 (34)

4/0 83 / 30VZ 05060 1.181 (30) 22 Series Tool (120) 83 / 32VZ 05061 1.260 (32) with AE 22/120 83 / 34VZ 05062 1.339 (34) dies 83 / 38VZ 05063 1.496 (38) 83 / 40VZ 05064 1.575 (40)

300 KCMIL 84 / 32VZ 05065 1.260 (32) 22 Series Tool (150) 84 / 34VZ 05066 1.339 (34) with AE 22/150 84 / 40VZ 05068 1.575 (40) dies

350 KCMIL 85 / 32VZ 05069 1.260 (32) 22 Series Tool (185) 85 / 40VZ 05070 1.575 (40) with AE 22/185 dies

*No�applicable�standard.�See�pages�229-231�for�recommended�ferrule�crimping�tools.

www.greenlee.comW


227

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


COLOr COdE: OLd din sTandard

COnduCTOr diMEnsiOns sizE CaTaLOG uPC inChEs (mm) rECOMMEndEd aWG (mm2) nuMBEr nuMBEr COLOr L1 L2 CriMPinG TOOLs

166 / GR 04835 Gray .409 (10.4) .236 (6) K1GL, K32GL, (0.14) 166 / GRL 04836 .488 (12.4) .315 (8) Die 03283

24 167 / H 04837 Light .409 (10.4) .236 (6) K1GL, K32GL, (0.25) 167 / HL 04838 Blue .488 (12.4) .315 (8) K30GL, Die 03283

22 168 / T 04839 Turquoise .409 (10.4) .236 (6) K1GL, K32GL, (0.34) 168 / TL 04840 .488 (12.4) .315 (8) K30GL, Die 03283

20 169 / OK 04841 Orange .471 (12) .236 (6) K1GL, K32GL, (0.5) 169 / O 04842 .551 (14) .315 (8) K36GL, K30GL, 169 / OH 04843 .630 (16) .394 (10) Die 03283

18 170 / WK 04844 White .488 (12.4) .236 (6) K1GL, K32GL, (0.75) 170 / W 04845 .574 (14.6) .315 (8) K36GL, K30GL, 170 / WH 04846 .645 (16.4) .394 (10) Die 03283 170 / WL 04847 .724 (18.4) .471 (12)

18 - 17 171 / GK 04848 Yellow .488 (12.4) .236 (6) K1GL, K32GL, (1) 171 / G 04849 .574 (14.6) .315 (8) K36GL, K30GL, 171 / GH 04850 .645 (16.4) .394 (10) Die 03283 171 / GL 04851 .724 (18.4) .471 (12)

16 172 / RO 04852 Red .574 (14.6) .315 (8) K1GL, K32GL, (1.5) 172 / RH 04853 .645 (16.4) .394 (10) K36GL, K30GL, 172 / RL 04854 .960 (24.4) .709 (18) Die 03283

14 173 / B 04855 Blue .598 (15.2) .315 (8) K1GL, K32GL, (2.5) 173 / BH 04856 .748 (19) .471 (12) K36GL, K30GL, 173 / BL 04857 .984 (25) .709 (18) Die 03283

12 174 / GR 04858 Gray .649 (16.5) .394 (10) K32GL, K36GL, (4) 174 / GRH 04859 .767(19.5) .471 (12) K30GL, 174 / GRL 04860 1.003 (25.5) .709 (18) Die 03283

10 175 / S 04861 Black .787 (20) .471 (12) K32GL, K34GL, (6) 175 / SL 04862 1.024 (26) .709 (18) K36GL, K30GL, Die 03283

8 176 / E 04863 Ivory .846 (21.5) .471 (12) K28GL, K34GL (10) 176 / EL 04864 1.082 (27.5) .709 (18)

6 177 / GR 04865 Green .870 (22.2) .471 (12) K28GL, K34GL (16) 177 / GRL 04866 1.110 (28.2) .709 (18)

4 178 / BR 04867 Brown 1.181 (30) .630 (16) K28GL (25) 178 / BRL 04868 1.377 (35) .866 (22)

2 179 / B 04869 Beige 1.181 (30) .630 (16) K28GL (35) 179 / BL 04870 1.535 (39) .984 (25)

1/0 180 / O 04871 Olive 1.433 (36.4) .787 (20) K28GL, K29GL (50)

COLOr COdE: din 46228, ParT 4


20 469 / 6 04548 White .471 (12) .236 (6) K1GL, K32GL, (0,5) 469 / 8 04549 .551 (14) .315 (8) K36GL, K30GL, 469 / 10 04550 .630 (16) .394 (10) Die 03283

18 470 / 6 04551 Gray .471 (12) .236 (6) K1GL, K32GL, (0,75) 470 / 8 04552 .551 (14) .315 (8) K36GL, K30GL, 470 / 10 04553 .630 (16) .394 (10) Die 03283 470 / 12 04554 .709 (18) .471 (12)

18 - 17 471 / 6 04555 Red .471 (12) .236 (6) K1GL, K32GL, (1) 471 / 8 04556 .551 (14) .315 (8) K36GL, K30GL, 471 / 10 04557 .630 (16) .394 (10) Die 03283 471 / 12 04558 .709 (18) .471 (12)

16 472 / 8 04559 Black .551 (14) .315 (8) K1GL, K32GL, (1,5) 472 / 10 04560 .630 (16) .394 (10) K36GL, K30GL, 472 / 12 04561 .709 (18) .471 (12) Die 03283 472 / 18 04562 .945 (24) .709 (18)

14 473 / 8 04563 Blue .551 (14) .315 (8) K1GL, K32GL, (2,5) 473 / 12 04564 .709 (18) .471 (12) K36GL, K30GL, 473 / 18 04565 .945 (24) .709 (18) Die 03283

12 474 / 10 04566 Gray .699 (17) .394 (10) K32GL, K36GL, (4) 474 / 12 04567 .787 (20) .471 (12) K30GL, 474 / 18 04568 1.024 (26) .709 (18) Die 03283

10 475 / 12 04569 Yellow .787 (20) .471 (12) K32GL, K34GL, (6) 475 / 18 04570 1.024 (26) .709 (18) K36GL, K30GL, Die 03283

8 476 / 12 04571 Red .866 (22) .471 (12) K28GL, K34GL, (10) 476 / 18 04572 1.102 (28) .709 (18) Die 03284

6 477 / 12 04573 Blue .945 (24) .471 (12) K28GL, K34GL, (16) 477 / 18 04574 1.102 (28) .709 (18) Die 03284

4 478 / 16 04575 Yellow 1.181 (30) .630 (16) K28GL, (25) 478 / 18 04576 1.181 (30) .709 (18) Die 03284 478 / 22 04577 1.417 (36) .866 (22)

2 479 / 16 04578 Red 1.181 (30) .630 (16) K28GL (35) 479 / 18 04579 1.181 (30) .709 (18) 479 / 25 04580 1.535 (39) .984 (25)

1/0 480 / 20 04581 Blue 1.417 (36) .787 (20) K28GL, K29GL (50) 480 / 25 04582 1.575 (40) .984 (25)

�See�pages�229-231�for�recommended�ferrule�crimping�tools.

• Terminate stranded wire into terminal blocks.• Electrolytic copper and tin plating provide maximum conductivity

and low contact resistance.

Insulated Wire Ferrules

sPECiFiCaTiOns

Material Coppersurface Tin-platedinsulated Polypropylene Plastic


ire &

Cab

le T

erm

inat

ion

228

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

Insulated Twin Wire Ferrules

• Use to compress two separate conductors together in one ferrule to make chain bridges easy to install.

• Electrolytic copper and tin plating provide maximum conductivity and low contact resistance.

sPECiFiCaTiOns

Material Copper

surface Tin plated

insulation Polypropylene plastic


2 x 20 869 / 8 02954 White .591 (15) .315 (8) K32GL, K36GL, (2 x 0.5) K30GL

2 x 18 870 / 8 02955 Gray .591 (15) .315 (8) K32GL, K36GL, (2 x 0.75) 870 / 10 02956 .669 (17) .394 (10) K30GL

2 x 17 871 / 8 02957 Red .591 (15) .315 (8) K32GL, K36GL, (2 x 1) 871 / 10 02958 .669 (17) .394 (10) K30GL

2 x 15 872 / 8 02959 Black .630 (16) .315 (8) K32GL, K36GL, (2 x 1.5) 872 / 12 02960 .787 (20) .471 (12) K30GL

2 x 13 873 / 10 02961 Blue .728 (18.5) .394 (10) K32GL, K36GL, (2 x 2.5) 873 / 13 02962 .846 (21.5) .512 (13) K30GL

2 x 11 874 / 12 02963 Gray .906 (23) .471 (12) K28GL, K34GL, (2 x 4) K36GL

2 x 10 875 / 14 02964 Yellow 1.024 (26) .551 (14) K28GL, K34GL, (2 x 6)

2 x 8 876 / 14 02965 Red 1.024 (26) .551 (14) K28GL (2 x 10)

2 x 5 877 / 14 02966 Blue 1.181 (30) .551 (14) K28GL (2 x 16)

�See�pages�229-231�for�recommended�ferrule�crimping�tools.

Insulated Wire Ferrules

• Terminate stranded wire into terminal blocks.• Electrolytic copper and tin plating provide maximum conductivity

and low contact resistance.

sPECiFiCaTiOns

Material Copper

surface Tin plated

insulation Polypropylene plastic

COLOr COdE: FrEnCh sTandard.


26 166 / 6 02971 Brown .409 (10,4) .236 (6) K1GL, K32GL, (0.14) 166 / 8 02972 .488 (12,4) .315 (8) Die 03283

24 167 / 6 02973 Light .433 (11) .236 (6) K1GL, K32GL, (0.25) 167 / 8 02974 Yellow .511 (13) .315 (8) K30GL, Die 03283

22 168 / 6 02975 Light .433 (11) .236 (6) K1GL, K32GL, (0.34) 168 / 8 02976 Green .511 (13) .315 (8) K30GL, Die 03283

20 169 / 6 02977 White .433 (11) .236 (6) K1GL, K32GL, (0.5) 169 / 8 02978 .511 (13) .315 (8) K30GL, Die 03283

18 170 / 6 02979 Blue .452 (11.5) .236 (6) K1GL, K32GL, (0.75) 170 / 8 02980 .531 (13.5) .315 (8) K36GL, K30GL, Die 03283

18 - 17 171 / 6 02981 Red .452 (11.5) .236 (6) K1GL, K32GL, (1) 171 / 8 02982 .531 (13.5) .315 (8) K36GL, Die 03283

16 172 / 6 02983 Black .452 (11.5) .236 (6) K1GL, K32GL, (1.5) 172 / 8 02984 .531 (13.5) .315 (8) K36GL, K30GL, 172 / 18 02985 .897 (22.8) .688 (17,5) Die 03283

14 173 / 8 02986 Gray .570 (14.5) .315 (8) K1GL, K32GL, (2.5) 173 / 18 02987 .945 (24) .688 (17.5) K36GL, K30GL, Die 03283

12 174 / 12 02988 Orange .681 (17.3) .452 (11.5) K32GL, K36GL, (4) 174 / 18 02989 1.003 (25.5) .688 (17.5) K30GL, Die 03283

10 175 / 12 02990 Green .787 (20) .452 (11.5) K32GL, K34GL, (6) 175 / 18 02991 1.024 (26) .688 (17.5) K36GL, K30GL, Die 03283

8 176 / 12 02992 Brown .843 (21.5) .471 (12) K28GL, K34GL, (10) 176 / 18 02993 1.062 (27) .688 (17.5) Die 03284

6 177 / 12 02994 Ivory .925 (23.5) .471 (12) K28GL, K34GL, (16) 177 / 18 02995 1.141 (29) .688 (17.5) Die 03284

4 178 / 18 02996 Black 1.181 (30) .688 (17.5) K28GL, (25) Die 03284

See�pages�229-231�for�recommended�ferrule�crimping�tools.

www.greenlee.comW


229

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL


Wire Ferrule CrimperProfessionalcrimpingtoolforinsulatedandnon-insulatedwireferruleswitharangeof20-12AWG(0.5-4mm2).• Fixedsteeldiesystem• Ferrulesinsertfromsideofthetool• FerrulecrimpconformstoDINstandards• Durablesteelconstructionforlonglife• Ergonomichandlesforlow-effortoperation• Singletoolforentirewirerange


PA1648 WireFerruleCrimper


PA901435 PZ6ROTOWireFerruleCrimper

PZ 6 ROTO Wire Ferrule CrimperProfessional-qualityrotarycrimpingtoolforinsulatedandnon-insulatedwireferruleswithawirerangeof24-10AWG(0.25-6.0mm2).• Rotatingdieforfrontorsideferruleinsertion• CrimpsconformtoEN60947-1&DIN46228Pt.1and4• Hardenedsteeldiesystemforlonglife• Singletoolforentirewirerange(noadditionaldiesarerequired)• Durablesteelconstructionforlonglife• Ergonomichandlesforlow-effortoperation

SPECIFICATIONS

Weight 15.2oz.(430g)

SPECIFICATIONS

Weight 13oz.(368g)

Wire Ferrule Crimper

Professional-qualitycrimpingtoolforinsulatedandnon-insulatedwirefer-ruleswitharangeof20-10AWG(0.5-6.0mm2).• FerrulesconformtoDIN46228Pt.1and4• Ferruleinsertionfromthesideofthetool• Singletoolforentirewirerange(noadditionaldiesarerequired)• Durablesteelconstructionforlonglife• Ergonomichandlesforlow-effortoperation


PA1647PA2681

WireFerruleCrimperReplacementdieset

SPECIFICATIONS

Crimper Weight 15.2oz.(430g)Die Weight 2.0oz.(57g)

WIRE FERRULE CRIMPING TOOLS


ire &

Cab

le T

erm

inat

ion

230

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

Wire Ferrule Crimper

Professionalcrimpingtoolforinsulatedandnon-insulatedwireferruleswithawirerangeof10-6AWG(6-16mm2).• Fixedsteeldiesystem• Ferrulesinsertfromsideofthetool• FerrulecrimpconformstoDINstandards• Durablesteelconstructionforlonglife• Ergonomichandlesforlow-effortoperation


PA1649 WireFerruleCrimper

SPECIFICATIONS

Weight 15.2oz.(430g)

Wire Ferrule Crimping Tool 26 - 13 AWG

sPECiFiCaTiOns

range 26 - 13 AWG (.14 - 2.5 mm²)Length 6.9" (175 mm)Weight .4 lbs. (0.2 kg)

• Makes trapezoidal crimps. • Includes cutter and replaceable stripper blade set.


K1GL 02633 Wire Ferrule Crimper


• Makes trapezoidal crimps with full-cycle ratchet mechanism to assure complete crimps.

• Crimps single and twin cable wire ferrules.• Adjusts automatically to correct crimp size.



Wire Ferrule Crimping Tool 10 - 6 AWG• Makes trapezoidal crimp with full-cycle ratchet mechanism to assure

complete crimps.• Crimps single and twin cable wire ferrules.• Adjusts automatically to correct crimp size.



sPECiFiCaTiOns

range Single cable wire ferrules: 26 - 10 AWG (.14 - 6 mm²) Twin wire ferrules: 2 x 20 - 2 x 13 AWG (2 x .5 - 2 x 2.5 mm²)

Length 8.4" (213 mm)Weight 1.1 lbs. (.4 kg)

sPECiFiCaTiOns

range Single cable wire ferrules: 10 - 6 AWG (6 - 16 mm²) Twin wire ferrules: 2 x 11 - 2 x 10 AWG (2 x 4 - 2 x 6 mm²)


www.greenlee.comW


231

Tel: 800.435.0786Fax: 800.451.2632

Tel: 800.435.0786Fax: 800.524.2853

Tel: +1.815.397.7070Fax: +1.815.397.9247

USACAN

ADAINTERN

ATIONAL



sPECiFiCaTiOns

range 25 - 10 AWG (0.14 - 6 mm²)Length 6.9" (175 mm)Weight 1.1 lbs. (0.4 kg)

Wire Ferrule Crimping Tool 7 - 1/0 AWG

• Makes square-shaped crimps.• Full-cycle ratchet mechanism assures complete crimps.• Adjusts automatically to correct crimp size.

• Makes trapezoidal crimps with full-cycle ratchet mechanism to assure complete crimps.

• Crimps single and twin cable wire ferrules.



Wire Ferrule Crimping Tool 1/0 - 3/0 AWG• Makes trapezoidal crimps with full-cycle ratchet mechanism to assure

complete crimps.


K29GL 02635 WIre Ferrule Crimper

sPECiFiCaTiOns

range Single cable wire ferrules: 7 - 1/0 AWG (10 - 50 mm²) Twin wire ferrules: 2 x 11 - 2 x 5 AWG (2 x 4 - 2 x 16 mm²)


sPECiFiCaTiOns

range 1/0 - 3/0 AWG (50 - 90 mm²)Length 13.2" (335 mm)Weight 1.8 lbs. (0.8 kg)




ire &

Cab

le T

erm

inat

ion

232

Tel:

800.

435.

0786

Fax:

800

.451

.263

2Te

l: 80

0.43

5.07

86Fa

x: 8

00.5

24.2

853

Tel:

+1.8

15.3

97.7

070

Fax:

+1.

815.

397.

9247

USA

CANADA

INTERNATIONAL

NOTES

greenlee wire

Documents

Transcript of greenlee wire