Greendustry 2014 rev 1.4
-
Upload
stockholm-lighting -
Category
Documents
-
view
252 -
download
20
description
Transcript of Greendustry 2014 rev 1.4
-
In opzione: sensore di presenza integrato Optionally available: built-in presence sensor
In opzione: sensore di luminosit integrato Optionally available: built-in automatic photo-electric lighting controller
Prodotti con segnalatore di presenza costituiscono unefficiente ed economica alternativa. I sensori di presenza rivelano anche i pi piccoli movimenti, non lasciandovi mai al buio. I rilevatori di presenza controllano lilluminazione in maniera affidabile e sicura garantendo una illuminazione adeguata solamente quando realmente necessaria.
- Sensore a microonde ad alta frequenza (da 10-2,4 Ghz)- Possibilit di impostare la sensibilit di rilevamento (da 2m - 10m di distanza)- Possibilit di impostare la durata di accensione tramite telecomando (da 30 sec a 35min)- M.I.R. (reiezione mutue frequenze) : il circuito MIR sincronizza, su frequenze differenti, lemissione delle microonde, per evitare problemi di interferenza con altri dispositivi.
Prodotti con sensore crepuscolare integrato costituiscono unefficiente ed economica soluzione. Linterruttore crepuscolare integrato con sensore ottico garantisce un comfort ancora maggiore. Il sensore ottico registra la luminosit dellambiente circostante e accende automaticamente i LED alla sera per poi spegnerli di nuovo automaticamente alle prime luci dellalba.
- Si installa e si configura con rapidit.- Sensore di luce ad alta sensibilit.- Risposta spettrale simile allocchio umano- Filtro di luce infrarosso- Temperatura di funzionamento (-40C a +100C)
Products with presence detector constitute an efficient and economic alternative. Presence sensors reveal even the smallest movements, not never leaving you in the dark. The presence sensors control the lighting in a reliable and secure way guaranteeing adequate lighting only when its really necessary.
- High frequency (from 10 to 2.4 Ghz) microwave sensor- Possibility to set the sensitivity of presence detection (2m - 10m away)- Possibility to set the timer operation even by remote control (from 30 sec to 35min)- M.I.R. (mutual frequencies rejection): MIR synchronizes the circuit, on different frequencies, the emission of microwaves, to avoid problems of interference with other devices.
Products with integrated twilight sensor are an efficient and economical solution. The twilight switch with integrated optic sensor ensures even greater comfort. The optical sensor records the brightness of the surrounding environment and automatically turn on the LEDs at night and then turn it off again automatically at dawn.
- Installs and configures quickly.- Light sensor with high sensitivity.- Spectral response similar to the human eye- Filter infrared light- Operating temperature (-40 C to + 100 C)
CONSUMARE RAZIONALMENTE PORTA A VANTAGGI ECONOMICIILLUMINARE MEGLIO, DOVE E QUANDO SERVE
RATIONAL CONSUMPTION LEADS TO ECONOMIC BENEFITSBETTER LIGHT UP, WHERE AND WHEN YOU NEED IT
TUTTO CI GRAZIE AI NUOVI PRODOTTI ERAL DOTATI DI SENSORI DI LUMINOSIT E/O SENSORI DI PRESENZAALL THIS THANKS TO NEW ERAL PRODUCTS EQUIPPED WITH BRIGHTNES SENSORS AND/OR PRESENCE SENSOR
NON SOLO LEDEdith
Alix
Flamp
PRODOTTI DISPONIBILI SU RICHIESTAPRODUCTS AVAIABLE UPON REQUEST
-
ERAL is the leading European manufacturer of LED lighting solutions. Over 15 years ago ERAL began a journey of research, innovation and passion that led it to discover LEDs, a new highly efficient, versatile, clean light source. Low energy consumption, long life and UV-free light are just some of the benefits making LEDs the best light source cur-rently available. Today ERAL continues to travel along the road of in-novation, placing its experience and professional skills at your disposal for the promotion of a new approach to lighting. Thanks to its ongoing technological research, ERAL has attained the highest quality standards in the manufacture of LED products for public and industrial lighting: extremely low energy consumption, reliable, high performance products designed to place the safety of citizens first while creating attractive urban spaces. Streets, car parkings, green areas, industrial buildings: ERAL has the perfect solution for all lighting needs.
ENG
ERAL lazienda leader in Europa per la produzione di soluzioni illumino-tecniche a LED. Pi di 15 anni fa ERAL ha intrapreso un percorso fatto di studio, innovazione e passione che lha condotta a conoscere e sviluppare una nuova fonte di luce efficiente, versatile e pulita, il LED. Consumo ener-getico ridotto, lunga durata nel tempo ed assenza di raggi ultravioletti sono solo alcuni dei grandi vantaggi che rendono il LED la migliore sorgente dilluminazione esistente. Oggi ERAL prosegue sulla strada dellinnova-zione, offrendovi esperienza e competenza per promuovere la diffusione di un nuovo modo di illuminare. Grazie ad una costante ricerca tecnologica, ERAL ha raggiunto i pi alti livelli qualitativi nella produzione di articoli a LED dedicati allilluminazione pubblica e industriale: prodotti a bassissi-mo consumo energetico, affidabili e performanti, nati per mettere in primo piano la sicurezza dei cittadini e valorizzare lestetica dello spazio urbano. La strada, il parcheggio, le aree verdi, la zona industriale: ERAL progetta la risposta adatta ad ogni esigenza dilluminazione, per offrirvi sempre la migliore soluzione.
ITA
-
Energia
Risparmio
Ambiente
Luce
Perch gestire le risorsedel nostro pianeta fondamentale.Because managing our planet resourcesis of vital importance.
Perch consumare razionalmente porta vantaggi economici.Because rational consumptionleads to economic benefits.
Perch rispettare la naturasignifica investire per il futuro.
Because respecting naturemeans investing in the future.
Perch illuminare meglio significa avere luce dove e quando serve.Because better lighting meanslight when and where you need it.
-
By buying ERAL products you will contribute to the employment and de-velopment of our country, Italy. For over 15 years, the Company has been employing over 350 people, standing out from the crowd of companies that buy the finished products in China and then commercialize it in Eu-rope. ERAL can however boast of the Made in Italy and takes pride in its choice, guaranteeing for each product: the creation of items based on its own design and exclusive projects, the manufacturing located in Italy, the support of satellite industries for components and works on behalf of a third party as most of the production process takes place in Italy. ERAL is one of the few companies in Europe that designs and manufactures power supplies and electronics controllers ensuring high energy efficiency and long life of its lighting products.
ENG
Acquistando i prodotti ERAL contribuirete alloccupazione ed allo sviluppo del nostro Paese. Infatti da oltre 15 anni lAzienda che occupa oltre 350 persone si distingue dalla massa di aziende che acquistano il prodotto fini-to in Cina e poi lo commercializzano in Europa. ERAL si pu invece fregiare del Made in Italy ed fiera della sua scelta e orgogliosa di poter garantire per ogni prodotto: la realizzazione su propri disegni e progetti esclusivi; il mantenimento di un indotto per la componentistica e le lavorazioni esterne in quanto gran parte della filiera produttiva si svolge in Italia. ERAL una delle poche aziende in Europa che progetta e produce lelettronica di ali-mentazione, comando e gestione garantendo alta efficienza energetica e lunghissima durata dei propri prodotti per illuminazione.
ITATHIS ISOUR WORK
-
Oltre 350 persone impiegateOltre 15 anni desperienza
Stabilimenti produttivi in Italia
Over 350 employeesOver 15 years of experience Production facilities in Italy
ProduzioneManufacture
CollaudoTesting
ProgettazioneDesign
-
ERAL s.r.l. declares that the Products listed in this price list are free from defects in engineering and manufacturing. ERAL s.r.l. guarantees for a period of five years from the date of purchase of the above-mentioned products to repair free of charge, the devices or components that are not properly working. The warranty can be activated only through the filling of a specific warranty declaration that must be requested and fulfilled within 60 days from the date of delivery of the products; the conditions of the warranty are subject to the EU consumer protection legislation (Consumer Code in Italy) currently in force.The warranty will not cover damages caused by the following:-catastrophic events (earthquakes, volcanic eruptions);-extreme weather conditions (tornados, floods, lightning);- malfunctioning of the electrical grid;- theft and acts of vandalism;- road accidents.
ENG
ITA
La ERAL Srl garantisce che i prodotti elencati nel presente catalogo sono esenti da vizi di progettazione e di fabbricazione. La ERAL Srl garantisce per un periodo di cinque anni dalla data di acquisto dei suddetti prodotti la riparazione gratuita degli apparecchi o dei loro componenti non perfettamente funzionanti. Lattivazione della garan-zia avviene solamente attraverso la compilazione da parte del cliente dellapposita dichiarazione di garanzia che dovr essere richiesta e compilata entro 60 giorni dalla data di consegna dei prodotti, ferma restando la normativa alluopo prevista dal codice del consumo. La garanzia non opera nel caso in cui gli apparecchi siano danneggiati da:- casi fortuiti quali eventi catastrofici (terremoti, eruzioni vulcaniche);- eventi atmosferici straordinari (trombe daria, alluvioni, fulmini);- mal funzionamento dellimpianto elettrico di rete;- incidenti causati dalla circolazione stradale;- furti ed atti di vandalismo.
SU MODULI LED ED ELETTRONICADI PILOTAGGIO
ON LED MODULES AND DRIVEELECTRONICS
WARRANTY
-
Affidabilit nella filiera produttiva, Eral garantisceprodotti esenti da vizi di progettazione e fabbricazioneEral products are free from defects inengineering and manufacturing
Reliablequality
Qualitaffidabile
Modulo da compilare, download disponibiledirettamente da sito aziendale www.eralsolution.comWarranty declaration to fill, available downloadon Eral web site www.eralsolution.com
Formto fill
Moduloda compilare
-
Eral uses a goniophotometer to obtain photometric data. The photometry of a light source quantifies its light distribution. Photometry measures the luminous intensity emitted by a luminaire in every direction expressed in candelas per kilolumen (cd/klm).The polar diagram describes the distribution of the luminous intensity on two mutually perpendicular planes, thus determining 2 polar curves. The cone diagram concerns luminaires which are symmetric to the axis. It describes the illuminance expressed in LUX at different distances from the luminaire.The UGR (Unified Glare Rating) is the direct glare index. It is calculated according to the luminaire features, the position of the lighting fixtures, the environment size and the position of the observers.
ENG
Eral impiega un goniofotometro per ottenere i rilievi fotometrici. La di-stribuzione luminosa di una sorgente espressa tramite la sua fotometria. La fotometria descrive lintensit di luminosa / emessa dalla lampada per ogni direzione dello spazio, espressa in candele su kilolumen (cd/klm). Il diagramma polare rappresenta una descrizione della distribuzione dell intensit luminosa per due piani nello spazio perpendicolare fra loro, defi-nendo cos 2 curve polari.Il cono fotometrico definito per le lampade che posseggono simmetria rispetto all asse. Esso descrive, per diverse distanze dalla lampada, lillu-minamento in LUX.LUGR (Unified Glare Rating), lindice di abbagliamento diretto. Esso vie-ne calcolato in funzione delle caratteristiche delle lampade, della posizione degli apparecchi, della dimensione dell ambiente e della posizione degli osservatori.
ITA
GoniofotometroGoniophotometer
PHOTOMETRY
-
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
160120
240200
80400
Polardiagram
Diagrammapolare
LUX m
3,0110 12,61
4,549 18,91
6,028 25,22
7,518 31,52
9,012 37,83
1,5441 6,30
Photometriccone
Conofotometrico
-
-Reduced CO emissions: wise energy management means reduced consumption with respect to traditional light sources.
-Reduced environmental impact: the components of the LEDs are easy to disassemble, dispose of and recycle.
-The reliability of our products, due to our carefully chosen materials and thanks to the design and manufacture of own electronics (feeding, control and management)
-Immediate switch-on also at very low temperatures-Up to 100000 hours of operation for products with power LEDs -High mechanical resistance does not contain gases nor filaments.
ENG
-Emissioni ridotte di CO: una corretta gestione dellenergia comporta consumi ridotti rispetto alle fonti luminose tradizionali.
-Impatto ambientale ridotto: i componenti dei LED sono facilmente disaggregabili, smaltibili e riciclabili.
-Affidabilit dei prodotti data dallaccurata scelta dei materiali e dalla progettazio-ne e realizzazione interna della elettronica di alimentazione e gestione.
-Accensione istantanea anche a temperature basse.-Fino a 100000 ore di funzionamento per prodotti con LED di potenza. -Rresistenza meccanica elevata dato che il LED non contiene gas n filamenti.
ITA
THINKABOUT IT
-
Impatto ambientale ridottoReduced environmental impact
Costi di manutenzione bassissimi
Extremely low maintenance costs
Resistenza meccanicaHigh mechanical resistent
Resistenza ad escursioni termiche (-40C)
Thermal excursions resistent (-40C)
Lunga durataLong life
-
SAFETYSTANDARD
-
ITA
Illuminare con sicurezzasenza alcun rischio di danni fotobiologiciGli apparecchi ERAL sono conformi alla normativa EN 62471:2008 e rientrano nel gruppo ESENTE DA RISCHI. Questo garantisce la massima sicurezza dei prodotti ERAL, in qualsiasi ambito duso, senza restrizioni. La ricerca e linnovazione unita allalta qualit dei materiali utilizzati ha permesso ad ERAL di realizzare prodotti qualitativamente evoluti, efficienti e sicuri.
ENG
Safe lighting with nophotobiological hazardThe ERAL luminaires are compliant with EN 62471:2008 safety standard and are part of the group RISK EXEMPT GROUP. This ensures the highest safety of ERAL products, in any setting, with no restrictions. Research and innovation combined with high quality materials has enabled ERAL to produce top quality, efficient and safe products.
RiskExempt
LUCE SICURASAFE LIGHTING
-
14 GUIDA ALLA LETTURAHOW TO READ
FINO A
4370LUMEN
DIFFUSORE OPALEOPAL DIFFUSER
DIFFUSORE GOFFRATOEMBOSSED DIFFUSER
CaratteristiChe CostruttiveConstruCtion features
illuminotecnicheilluminotechnicalTubo a LED dotato di sorgente luminosa composta da SMD power LEDs di ultima generazione a alta densit montati su PCB (circuiti stampati). In caso di diffusore interno goffrato con lutilizzo delle ottiche (nelle versioni 30 - 60) o senza utilizzo delle ottiche (nella versione 120) viene garantita una perfetta pulizia del cono di luce grazie alle speciale goffratura. Nella versione con diffusore interno opale la differenza tra le due ottiche (30 - diffusa) sostanzialmente estetica, legata allampiezza dellarea di emissione della luce sul tubo. Sistema ottico brevettato. Articolo disponibile anche con SMD power LEDs ad alto indice di resa cromatica (CRI92).LeD tube equipped with light source composed of sMD power LeDs of the latest generation mounted on PCB. a perfect neatness of the light cone is guaranteed by choosing the internal embossed diffuser, which includes an optics system with 30, 60 or without any lens with 120. in the internal opaline diffuser version, the difference between the two optics (30 - diffused) is substantially aesthetical, related to the width of the light emission on the tube. Patented optical system. article also available with high color rendering index sMD power LeDs(Cri92).
MeccanicheMechanicalTubo in policarbonato nelle due diverse varianti, goffrato e opalino con sistema di chiusura stagna tramite tappi laterali basculanti in alluminio anodizzato (6026). Tramite diversi accessori si hanno molteplici soluzioni di installazione: a sospensione o a plafone (diversi accessori). Montaggio di una particolare valvola tCs come presa daria di protezione per evitare la formazione di condensa allinterno del tubo garantendo cosi una lunghissima vita alla lampada.Polycarbonate tube available in two different versions (embossed or opaline) with airtight closing system by means of anodized aluminum (6026) tilting caps. through different accessories you have multiple installation options: suspension or surface-ceiling installation (various accessories). Mounting of a particular valve TCS as air intake to prevent the formation of condensation inside the tube thus ensuring an extremely long life of the lamp.
elettricheelectricalSistema di connessione a connettori rapidi con serie di cavi accessori per creare linee continue direttamente connesse alla rete elettrica grazie al driver incluso in ogni barra.Connection system with a series of quick connectors and cable accessories to create continuous lines, directly connected to the mains thanks to the driver included in each bar.
High PROTECTIONPlafONIERa a TubO IP66cEILIng LIght tUBE IP66
ACCE
SSOR
I CA
BLAG
GIO
WIR
Ing
Acc
ESSO
RIES
67
Sistema di connessione multiploMulti connection system
TUBESmax 10 m.
INCL
USO
IncL
UDED
Sistema di controllo della traspirazionesystem for controlling the transpiration
202
52PLAFONIERE E INCASSI
REcESSED & cEILIng LIghtS
CODE+
COLOR +
OPTIC
GUIDA COMPOSIZIONE CODICE / CODE COMPOSITION GUIDE
14
53PLAFONIERE E INCASSI
RECESSED & CEILING LIGHTS
4 5
64
Accessori per installazione e per il cablaggio Accessories for installation and wiring
L.
DRIVER INCLUDED
3851
1 2
3
1 INPUT: Connettore rapido maschio - Male quick connector2 OUTPUT: Connettore rapido femmina - Female quick connector3 TCS: Sistema di controllo della traspirazione - Transpiration control system4-5 Tappi terminali isolanti - Isolating end caps
4 5
Photometric curves
Hi
gh W
IRED
EM
BOSS
ED
30
LUX m
3,0132 12,64
4,559 18,95
6,033 25,27
7,521 31,59
9,015 37,91
1,5529 6,32180
150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200
300
400
100
0
LUX m
3,0100 18,80
4,544 28,20
6,025 37,60
7,516 47,00
9,011 56,40
1,5400 9,40200
300250
150100
500
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
60
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200
300
100
0
LUX m
3,093 19,26
4,541 28,90
6,023 38,53
7,515 48,16
9,010 57,79
1,5373 9,63120
Hi
gh W
IRED
OPA
L
30
LUX m
3,0107 15,31
4,547 22,97
6,027 30,62
7,517 38,28
9,012 45,93
1,5427 7,66180
150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200150
250300
1000
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200160120
240
800
LUX m
3,094 19,38
4,542 29,07
6,024 38,77
7,515 48,46
9,010 58,15
1,5377 9,69Diff.
High
WIR
ED E
MBO
SSED
30
LUX m
3,086 12,64
4,522 18,95
6,014 25,27
7,510 31,59
9,015 37,91
1,5346 6,32180
150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200
300
400
100
0
LUX m
3,065 18,80
4,529 28,20
6,016 37,60
7,510 47,00
9,07 56,40
1,5262 9,40200
300250
150100
500
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
60
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200
300
100
0
LUX m
3,061 19,26
4,527 28,90
6,015 38,53
7,510 48,16
9,07 57,79
1,5244 9,63120
Le curve fotometriche si riferiscono al modello lungo 1576 mm con colore luce LED bianco naturale (4000 K); Su richiesta vengono fatti i calcoli illuminotecnici per determinare il numero soddisfacente di prodotti utile a garantire il fabbisogno di luce richiestoPhotometric curves refer to the model 1576 mm with natural white LED light color (4000 K); Upon request, we make lighting calculations to determine the correct number of products useful to ensure the needs of light required
High PROTECTION EMBOSSED CRI80
CODE
COLD WHITE C
6000K
NAT. WHITE N
4000K
WARM WHITE W
3000K
POTENZA NOMINALENOMINAL POWER
WATT
POTENZA TOTALETOTAL POWER
WATT
LUNGHEZZALENGHT
L.. OPTIC
CODE
95254 0,74 Kg 2,72 dm 1350 lm 1350 lm 1260 lm 12,0 W 13,5 W 666 mm 30
60
120
30
60
12
95255 1,13 Kg 4,90 dm + 2730 lm 2730 lm 2540 lm 20,0 W 22,0 W 1276 mm +
95256 1,50 Kg 6,00 dm 4370 lm 4370 lm 4030 lm 35,0 W 38,5 W 1576 mm
High PROTECTION EMBOSSED CRI92
CODE
NAT. WHITE N
4000K
WARM WHITE W
3000K
POTENZA NOMINALENOMINAL POWER
WATT
POTENZA TOTALETOTAL POWER
WATT
LUNGHEZZALENGHT
L.. OPTIC
CODE
94679 0,74 Kg 2,72 dm
+
1073 lm 990 lm 12,0 W 13,5 W 666 mm 30
60
120
30
60
12
94680 1,13 Kg 4,90 dm 2177 lm 2008 lm 20,0 W 22,0 W 1276 mm +
94681 1,50 Kg 6,00 dm 3101 lm 2860 lm 35,0 W 38,5 W 1576 mm
High PROTECTION OPAL CRI80
CODE
COLD WHITE C
6000K
NAT. WHITE N
4000K
WARM WHITE W
3000K
POTENZA NOMINALENOMINAL POWER
WATT
POTENZA TOTALETOTAL POWER
WATT
LUNGHEZZALENGHT
L.. OPTIC
CODE
95257 0,74 Kg 2,72 dm
+
1350 lm 1350 lm 1260 lm 12,0 W 13,5 W 666 mm
+
30 30
95258 1,13 Kg 4,90 dm 2730 lm 2730 lm 2540 lm 20,0 W 22,0 W 1276 mm
Diffused 0095259 1,50 Kg 6,00 dm 4370 lm 4370 lm 4030 lm 35,0 W 38,5 W 1576 mm
DIFFUSORE GOFFRATOEMBOSSED DIFFUSER
DIFFUSORE GOFFRATOEMBOSSED DIFFUSER
DIFFUSORE OPALEOPAL DIFFUSER
80-92 66 08 35
NOME PRODOTTOPRODUCT NAME
FOTO PRODOTTOPRODUCT PHOTO
TECNOLOGIA IMPIEGATAUSED TECNOLOGY
DESCRIZIONE PRODOTTOPRODUCT DESCRIPTION
DISEGNO TECNICO QUOTATOQUOTED TECHNICAL DRAWING
CURVE FOTOMETRICHEPHOTOMETRICAL CURVES
PITTOGRAMMIPICTOGRAMS
GUIDA COMPOSIZIONE DEL CODICECODE GUIDE COMPOSITION
TABELLA TECNICADATA SHEET
DETTAGLIODETAIL
ESEMPIOEXAMPLE
+ + =9524995250
95248 CNW
306012
95249W60
OTTICHE DISPONIBILIAVAILABLE OPTICS
LUNGHEZZALENGHT
CODICE OTTICHEOPTICS CODECODICE PRODOTTO
PRODUCT CODE
PESOWEIGHT
VOLUMEVOLUME
POTENZA ASSORBITAPOWER CONSUMPTION
POTENZA NOMINALENOMINAL POWER
TEMPERATURA COLORECOLOR TEMPERATURE
FLUSSO LUMINOSO NOMINALENOMINAL LUMINOUS FLUX
CODE+
COLOR +
OPTIC
GUIDA COMPOSIZIONE CODICE / CODE COMPOSITION GUIDE
14
53PLAFONIERE E INCASSI
RECESSED & CEILING LIGHTS
4 5
64
Accessori per installazione e per il cablaggio Accessories for installation and wiring
L.
DRIVER INCLUDED
3851
1 2
3
1 INPUT: Connettore rapido maschio - Male quick connector2 OUTPUT: Connettore rapido femmina - Female quick connector3 TCS: Sistema di controllo della traspirazione - Transpiration control system4-5 Tappi terminali isolanti - Isolating end caps
4 5
Photometric curves
Hi
gh W
IRED
EM
BOSS
ED
30
LUX m
3,0132 12,64
4,559 18,95
6,033 25,27
7,521 31,59
9,015 37,91
1,5529 6,32180
150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200
300
400
100
0
LUX m
3,0100 18,80
4,544 28,20
6,025 37,60
7,516 47,00
9,011 56,40
1,5400 9,40200
300250
150100
500
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
60
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200
300
100
0
LUX m
3,093 19,26
4,541 28,90
6,023 38,53
7,515 48,16
9,010 57,79
1,5373 9,63120
Hi
gh W
IRED
OPA
L
30
LUX m
3,0107 15,31
4,547 22,97
6,027 30,62
7,517 38,28
9,012 45,93
1,5427 7,66180
150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200150
250300
1000
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200160120
240
800
LUX m
3,094 19,38
4,542 29,07
6,024 38,77
7,515 48,46
9,010 58,15
1,5377 9,69Diff.
High
WIR
ED E
MBO
SSED
30
LUX m
3,086 12,64
4,522 18,95
6,014 25,27
7,510 31,59
9,015 37,91
1,5346 6,32180
150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200
300
400
100
0
LUX m
3,065 18,80
4,529 28,20
6,016 37,60
7,510 47,00
9,07 56,40
1,5262 9,40200
300250
150100
500
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
60
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200
300
100
0
LUX m
3,061 19,26
4,527 28,90
6,015 38,53
7,510 48,16
9,07 57,79
1,5244 9,63120
Le curve fotometriche si riferiscono al modello lungo 1576 mm con colore luce LED bianco naturale (4000 K); Su richiesta vengono fatti i calcoli illuminotecnici per determinare il numero soddisfacente di prodotti utile a garantire il fabbisogno di luce richiestoPhotometric curves refer to the model 1576 mm with natural white LED light color (4000 K); Upon request, we make lighting calculations to determine the correct number of products useful to ensure the needs of light required
High PROTECTION EMBOSSED CRI80
CODE
COLD WHITE C
6000K
NAT. WHITE N
4000K
WARM WHITE W
3000K
POTENZA NOMINALENOMINAL POWER
WATT
POTENZA TOTALETOTAL POWER
WATT
LUNGHEZZALENGHT
L.. OPTIC
CODE
95254 0,74 Kg 2,72 dm 1350 lm 1350 lm 1260 lm 12,0 W 13,5 W 666 mm 30
60
120
30
60
12
95255 1,13 Kg 4,90 dm + 2730 lm 2730 lm 2540 lm 20,0 W 22,0 W 1276 mm +
95256 1,50 Kg 6,00 dm 4370 lm 4370 lm 4030 lm 35,0 W 38,5 W 1576 mm
High PROTECTION EMBOSSED CRI92
CODE
NAT. WHITE N
4000K
WARM WHITE W
3000K
POTENZA NOMINALENOMINAL POWER
WATT
POTENZA TOTALETOTAL POWER
WATT
LUNGHEZZALENGHT
L.. OPTIC
CODE
94679 0,74 Kg 2,72 dm
+
1073 lm 990 lm 12,0 W 13,5 W 666 mm 30
60
120
30
60
12
94680 1,13 Kg 4,90 dm 2177 lm 2008 lm 20,0 W 22,0 W 1276 mm +
94681 1,50 Kg 6,00 dm 3101 lm 2860 lm 35,0 W 38,5 W 1576 mm
High PROTECTION OPAL CRI80
CODE
COLD WHITE C
6000K
NAT. WHITE N
4000K
WARM WHITE W
3000K
POTENZA NOMINALENOMINAL POWER
WATT
POTENZA TOTALETOTAL POWER
WATT
LUNGHEZZALENGHT
L.. OPTIC
CODE
95257 0,74 Kg 2,72 dm
+
1350 lm 1350 lm 1260 lm 12,0 W 13,5 W 666 mm
+
30 30
95258 1,13 Kg 4,90 dm 2730 lm 2730 lm 2540 lm 20,0 W 22,0 W 1276 mm
Diffused 0095259 1,50 Kg 6,00 dm 4370 lm 4370 lm 4030 lm 35,0 W 38,5 W 1576 mm
DIFFUSORE GOFFRATOEMBOSSED DIFFUSER
DIFFUSORE GOFFRATOEMBOSSED DIFFUSER
DIFFUSORE OPALEOPAL DIFFUSER
80-92 66 08 35
CODICE CORRETTORIGHT CODE
=CODE + COLOR + OPTIC
HOWTO READ
-
15INDICEINDEX
ILLUMINAZIONE INDUSTRIALE INDUSTRIAL LIGHTINGTUBI A LED LED TUBES
Oval T8 Top T8 High T8 Drivers T8
20 22 24 26
LUCE GENERALE GENERAL LIGHTING
Edith infos Edith MODULAR CEILING Edith SURFACE Edith RECESSED Edith SUSPENSION
94 102 124 134 140LINEA EMERGENZA EMERGENCY LINE
154
Emergencyline
PLAFONIERE E INCASSI RECESSED & CEILING LIGHTSSMD LEDs SMD LEDs
Top wired High wired Top PROTECTION High PROTECTION Top PROTECTION wired High PROTECTION wired Aline SINGLE Aline DOUBLE Alix SINGLE
Alix DOUBLE & DOUBLE slimAlix QUICK SINGLE Alix QUICK DOUBLE & DOUBLE slim
Alix QUICK XL Acix QUICK Alus
7238 42 48 52 56 60 66 66
74 76 78 80 86 90
ILLUMINAZIONE STRADALE & URBANA STREET & URBAN LIGHTINGTESTE PALO POLE LIGHTS
OVP
OVERVOLTAGEPROTECTION
100
%
80%
60%
40%Transpirationcontrol systemOver voltageprotection
Autocontrol Telecontrol Mini-Parker Parker Mini-Ledweg LedwegLedweg PLUS
Drop
Drop AIR Voyager New Fosten Sphera Spider Megalamp
204 206 210 211 216212
236 238 242 246 250 254 258
222 226 232
PALI POLES
Pali-Poles
264GLOSSARIO GLOSSARY
GLOSSARIOGLOSSARY
GLOSSARIOGLOSSARY274
88838 249
88839 249
88840 249
88841 249
88854 249
88855 249
88856 249
88857 249
88862 249
88863 249
88864 249
88865 249
89161 25
89235 249
89236 249
89237 249
89238 249
89239 249
89240 249
91468 260
91500 260
91502 260
91629 221
91630 221
91631 221
91632 221
91633 221
91634 221
91635 226
91636 226
91637 226
91638 226
91639 226
91640 226
91641 226
91642 226
91643 226
91644 226
91645 226
91646 226
91647 226
91648 226
91649 226
91650 226
91651 226
91652 226
91653 225
91654 225
91655 225
91656 225
91659 225
91660 225
91661 225
91662 225
91665 225
91666 225
91667 225
91668 225
94198 211
94199 211
94200 211
94201 211
94295 23
94296 23
94297 23
94301 23
94302 23
94303 23
94320 167
94321 167
94322 167
94323 167
94324 167
94325 167
94326 167
94327 167
94328 167
94329 167
94330 167
94331 167
94349 253
94350 253
94351 253
94416 179
94417 179
94418 179
94419 215
94420 215
94421 211
94422 211
94423 215
94424 215
94679 55
94680 55
94681 55
94685 59
94686 59
94687 59
94804 51
94805 51
94806 51
94873 156
94874 156
94882 21
94883 21
94884 21
94885 21
94886 21
94887 21
94896 41
94897 41
94898 41
94899 41
94900 41
94901 41
94908 45
94909 45
94910 45
94911 45
94912 45
94913 45
94962 19
94963 19
94964 19
94965 19-37
94966 19-37
94967 19-37
94968 19
94969 19
94970 19
94971 19
94972 19
94973 19
94977 37
94978 37
94979 37
Glossary
276
PLAFONIERE E SOSPENSIONI SUSPENSION & CEILING LIGHTSPOWER LEDs POWER LEDs
Multilamp Mini-Flamp Flamp LOW Flamp infos Flamp Mini-SwingPark SwingPark Mini Parker WALL Parker WALL
168 172 174 176 180 188 190 192 196
-
16 DOVE APPLICAREWHERE TO APPLY
WHERE TO APPLY
Oval T8
Top T8
High T8
TUBI A LED T8LED TUBES T8
Top WIRED
High WIRED Top PROTECTION High PROTECTION Top PROTECTION wired
High PROTECTION wired Aline Alix Acix
Alus Edith
PLAFONIEREE INCASSIRECESSED& CEILING
-
17DOVE APPLICAREWHERE TO APPLY
Mini-Parker Parker
Mini-Ledweg LedwegLedweg PLUS
Drop Drop AIR
Voyager New Fosten Sphera Spider
Megalamp
TESTE PALOPOLE LIGHTS
Multilamp Flamp
Flamp LOW Mini-SwingPark SwingPark Mini-Flamp
Mini Parker WALL Parker WALL
PLAFONIEREE SOSPENSIONI
SUSPENSION& CEILING
-
18TUBI A LED T8
LED TUBES T8
TUBI A LED T8LED TUBES T8
-
Oval T8 20
Top T8 22
High T8 24
Drivers 26
-
20TUBI A LED T8
LED TUBES T8
FINO A
2592LUMEN
CARATTERISTICHE COSTRUTTIVECONSTRUCTION FEATURES
IlluminotecnicheIlluminotechnicalTubo a LED T8 dotato di sorgente luminosa composta da SMD power LEDs di ultima generazione; diodi montati su PCB (circuiti stampati). Ottica diffusa.
LED tube T8 equipped with light source composed of SMD power LEDs of the latest generation; diodes mounted on PCB. Diffused optic.
MeccanicheMechanicalProfilo in alluminio anodizzato con diffusore in policarbonato opalino. Lunghezze e attacchi terminali G13 standard permettono linstallazione su porta lampada a rotazione PBT standard in sostituzione alle tradizionali lampade lineari a scarica di gas.Anodized aluminum profile with polycarbonate opalin diffuser. Standard lengths and standard G13 sockets to replace the traditional linear lamps (gas discharge lamp) and install on standard PBT holders with rotating socket.
ElettricheElectricalTubo a LED con driver integrato. LED starter incluso. Per collegamenti vedi sezione esempi di collegamento (pagina 31)LED tube with integrated driver. LED starter included. For connections, see section Connection examples (page 31)
Oval T8TUBO A LED T8T8 LED TUBE
DIFFUSORE OPALEOPAL DIFFUSER
-
CODE+
COLOR +
OPTIC
GUIDA COMPOSIZIONE CODICE / CODE COMPOSITION GUIDE
14
21TUBI A LED T8
LED TUBES T8
RiskExempt
80 08 33 35
Oval T8 OPAL CRI80
CODE
COLD WHITE C
6000K
NAT. WHITE N
4000K
WARM WHITE W
3000K
POTENZA NOMINALENOMINAL POWER
WATT
POTENZA TOTALETOTAL POWER
WATT
LUNGHEZZALENGHT
L.. OPTIC
CODE
96920 0,22 Kg 1,95 dm
+
2112 lm 2024 lm 1936 lm 18,0 W 19,8 W 1198 mm
+ Diffused 00
96921 0,25 Kg 2,43 dm 2592 lm 2484 lm 2376 lm 22,0 W 24,2 W 1498 mm
DIFFUSORE OPALEOPAL DIFFUSER
Photometric curves
Ov
al T
8 OP
AL
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200160120
240
800
LUX m
3,0116 12,92
4,551 19,38
6,029 25,84
7,519 32,30
9,013 38,77
1,5463 6,46Diff.
Le curve fotometriche si riferiscono al modello lungo 1500 mm con colore luce LED bianco naturale (4000 K); Su richiesta vengono fatti i calcoli illuminotecnici per determinare il numero soddisfacente di prodotti utile a garantire il fabbisogno di luce richiestoPhotometric curves refer to the model 1500 mm with natural white LED light color (4000 K); Upon request, we make lighting calculations to determine the correct number of products useful to ensure the needs of light required
DRIVER INCLUDEDAlimentatori incorporato
Built-in dirver
L.
29,5 230V230V
32
28,5
-
22TUBI A LED T8
LED TUBES T8
FINO A
3130LUMEN
Emergencyline32
Disponibile KIT con sistema elettronico diemergenza (per prodotti senza driver integrato)Available KIT with emergency electronic system
(only for products without integrated driver)
CARATTERISTICHE COSTRUTTIVECONSTRUCTION FEATURES
IlluminotecnicheIlluminotechnicalTubo a LED T8 dotato di sorgente luminosa composta da SMD power LEDs di ultima generazione; diodi montati su PCB (circuiti stampati). Equipaggiato di ottiche per la canalizzazione del fascio luminoso, a scelta fra 30, 60 e 120 poste sotto il diffusore esterno (goffrato o opalino). Sistema ottico bre-vettato. Versione con diffusore goffrato disponibile anche con LED PLCC6 ad alto indice di resa cromatica (CRI92).LED tube T8 equipped with light source composed of SMD power LEDs of the latest generation; diodes mounted on PCB. Featuring with optics for the channeling of the light beam, to be chosen between 30, 60 and 120 placed under the external diffuser (embossed or opal). Patented optical system. Embossed diffuser version also available with LED PLCC6 with high color rendering index (CRI92).
MeccanicheMechanicalProfilo in alluminio anodizzato 6060 con diffusore in policarbonato disponibile nelle versioni goffrata o opalina. Lunghezze e attacchi terminali G13 standard permettono linstallazione su porta lampada a rotazione PBT standard in sostituzione alle tradizionali lampade lineari a scarica di gas.Anodized aluminum 6060 profile with polycarbonate diffuser in two different versions: embossed or opaline. Standard lengths and standard G13 sockets to replace the traditional linear lamps (gas discharge lamp) and install on standard PBT holders with rotating socket.
ElettricheElectricalTubo a LED disponibile con o senza driver integrato. LED starter incluso. Per collegamenti vedi sezione esempi di collegamento (pagina 31)LED tube available with or without integrated driver. LED starter included. For connections, see section Connection examples (page 31)
DIFFUSORE GOFFRATOEMBOSSED DIFFUSER
DIFFUSORE OPALEOPAL DIFFUSER
Top T8TUBO A LED T8T8 LED TUBE
Su richiesta disponibile prodotto con tappi girevoli che permettono di indirizzare il fasco luminiso
On request available product with rotating caps that allow you to direct the beam pipe
0
-80
0 +80
SU R
ICHI
ESTA
UP
ON R
EQUE
ST
LED
INCL
USO
INCL
UDED
LEDSTARTER
InstallazioneInstallation
30
-
CODE+
COLOR +
OPTIC
GUIDA COMPOSIZIONE CODICE / CODE COMPOSITION GUIDE
14
23TUBI A LED T8
LED TUBES T8
Photometric curves
To
p T
8 EM
BOSS
ED 30
LUX m
3,0101 9,99
4,545 14,98
6,025 19,97
7,516 24,96
9,011 29,96
1,5403 4,99180
150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
600800
1000
400200
0
LUX m
3,073 18,80
4,532 28,20
6,018 37,60
7,512 47,00
9,08 56,40
1,5291 9,40200
300250
150100500
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
60
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200160120
240
8040
0
LUX m
3,065 18,91
4,529 28,37
6,016 37,83
7,510 47,29
9,07 56,74
1,5261 9,46120
To
p T
8 OP
AL
30
LUX m
3,078 15,31
4,535 22,97
6,019 30,62
7,512 38,28
9,09 45,93
1,5311 7,66180
150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200150
250300
1000
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200160120
240
800
LUX m
3,069 19,38
4,530 29,07
6,017 38,77
7,511 48,46
9,08 58,15
1,5274 9,69Diff.
Top
T8
EMBO
SSED
30LUX m
3,071 12,64
4,531 18,95
6,018 25,27
7,511 31,59
9,08 37,91
1,5282 6,32180
150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200
300
400
100
0
LUX m
3,053 18,80
4,524 28,20
6,013 37,60
7,59 47,00
9,06 56,40
1,5213 9,40200
300250
150100500
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
60
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200160120
240
8040
0
LUX m
3,048 18,91
4,521 28,37
6,012 37,83
7,58 47,29
9,05 56,74
1,5192 9,46120
Le curve fotometriche si riferiscono al modello lungo 1500 mm con colore luce LED bianco naturale (4000 K); Su richiesta vengono fatti i calcoli illuminotecnici per determinare il numero soddisfacente di prodotti utile a garantire il fabbisogno di luce richiestoPhotometric curves refer to the model 1500 mm with natural white LED light color (4000 K); Upon request, we make lighting calculations to determine the correct number of products useful to ensure the needs of light required
AccessoriesCavo di sicurezza in acciaio per tubi T8Steel security cable for T8 tubes
CODE: 98283
Top T8 EMBOSSED CRI80
CODE
CODE
COLD WHITE C
6000K
NAT. WHITE N
4000K
WARM WHITE W
3000K
POTENZA NOMINALENOMINAL POWER
WATT
POTENZA TOTALETOTAL POWER
WATT
LUNGHEZZALENGHT
L.. OPTIC
CODE
95200 0,26 Kg 0,75 dm 95203 0,39 Kg 0,75 dm
+
975 lm 975 lm 910 lm 8,0 W 9,0 W 590 mm 30
60
120
30
60
12
95201 0,43 Kg 1,47 dm 95204 0,57 Kg 1,47 dm 2185 lm 2185 lm 2015 lm 17,5 W 19,0 W 1200 mm +
95202 0,5 Kg 1,86 dm 95205 0,86 Kg 1,86 dm 3130 lm 3130 lm 2880 lm 24,5 W 27,0 W 1500 mm
Top T8 EMBOSSED CRI92
CODE
CODE
NAT. WHITE N
4000K
WARM WHITE W
3000K
POTENZA NOMINALENOMINAL POWER
WATT
POTENZA TOTALETOTAL POWER
WATT
LUNGHEZZALENGHT
L.. OPTIC
CODE
94882 0,26 Kg 0,75 dm 94885 0,39 Kg 0,75 dm
+
695 lm 650 lm 8,0 W 9,0 W 590 mm 30
60
120
30
60
12
94883 0,43 Kg 1,47 dm 94886 0,57 Kg 1,47 dm 1542 lm 1440 lm 17,5 W 19,0 W 1200 mm +
94884 0,5 Kg 1,86 dm 94887 0,86 Kg 1,86 dm 2262 lm 2112 lm 24,5 W 27,0 W 1500 mm
Top T8 OPAL CRI80
CODE
CODE
COLD WHITE C
6000K
NAT. WHITE N
4000K
WARM WHITE W
3000K
POTENZA NOMINALENOMINAL POWER
WATT
POTENZA TOTALETOTAL POWER
WATT
LUNGHEZZALENGHT
L.. OPTIC
CODE
95206 0,26 Kg 0,75 dm 95209 0,39 Kg 0,75 dm
+
975 lm 975 lm 910 lm 8,0 W 9,0 W 590 mm 30 30
95207 0,43 Kg 1,47 dm 95210 0,57 Kg 1,47 dm 2185 lm 2185 lm 2015 lm 17,5 W 19,0 W 1200 mm +
Diffused 0095208 0,5 Kg 1,86 dm 95211 0,86 Kg 1,86 dm 3130 lm 3130 lm 2880 lm 24,5 W 27,0 W 1500 mm
DIFFUSORE GOFFRATOEMBOSSED DIFFUSER
DIFFUSORE GOFFRATOEMBOSSED DIFFUSER
DIFFUSORE OPALEOPAL DIFFUSER
CABLAGGIO CON DRIVER INCORPORATOWIRING WITH BUILT-IN DRIVER
33230V
L.
30
DRIVER INCLUDEDAlimentatori incorporato
Built-in dirver
CABLAGGIO CON DRIVER ESTERNOWIRING WITH EXTERNAL DRIVER
230V
33
L.
30
DRIVERAlimentatore non incluso
Driver not includedAlimentatori consigliatiRecommended dirvers
26
RiskExempt
80-92 08 40 35
-
24TUBI A LED T8
LED TUBES T8
FINO A
4370LUMEN
Emergencyline32
Disponibile KIT con sistema elettronico diemergenza (per prodotti senza driver integrato)Available KIT with emergency electronic system
(only for products without integrated driver)
CARATTERISTICHE COSTRUTTIVECONSTRUCTION FEATURES
IlluminotecnicheIlluminotechnicalTubo a LED T8 dotato di sorgente luminosa composta da SMD power LEDs di ultima generazione; diodi montati su PCB (circuiti stampati). Equipaggiato di ottiche per la canalizzazione del fascio luminoso, a scelta fra 30, 60 e 120 poste sotto il diffusore esterno (goffrato o opalino). Sistema ottico brevettato. Versione con diffusore goffrato disponibile anche con LED PLCC6 ad alto indice di resa cromatica (CRI92).LED tube T8 equipped with light source composed of SMD power LEDs of the latest generation; diodes mounted on PCB. Featuring with optics for the channeling of the light beam, to be chosen between 30, 60 and 120 placed under the external diffuser (embossed or opal). Patented optical system. Embossed diffuser version also available with LED PLCC6 with high color rendering index (CRI92).
MeccanicheMechanicalProfilo in alluminio anodizzato 6060 con diffusore in policarbonato disponibile nelle versioni goffrata o opalina. Lunghezze e attacchi terminali G13 standard permettono linstallazione su porta lampada a rotazione PBT standard in sostituzione alle tradizionali lampade lineari a scarica di gas.Anodized aluminum 6060 profile with polycarbonate diffuser in two different versions: embossed or opaline. Standard lengths and standard G13 sockets to replace the traditional linear lamps (gas discharge lamp) and install on standard PBT holders with rotating socket.
ElettricheElectricalTubo a LED disponibile con o senza driver integrato. LED starter incluso. Per collegamenti vedi sezione esempi di collegamento (pagina 31)LED tube available with or without integrated driver. LED starter included. For connections, see section Connection examples (page 31)
DIFFUSORE GOFFRATOEMBOSSED DIFFUSER
DIFFUSORE OPALEOPAL DIFFUSER
High T8TUBO A LED T8T8 LED TUBE
Su richiesta disponibile prodotto con tappi girevoli che permettono di indirizzare il fasco luminiso
On request available product with rotating caps that allow you to direct the beam pipe
0
-80
0 +80
SU R
ICHI
ESTA
UP
ON R
EQUE
ST
LED
INCL
USO
INCL
UDED
LEDSTARTER
InstallazioneInstallation
30
-
CODE+
COLOR +
OPTIC
GUIDA COMPOSIZIONE CODICE / CODE COMPOSITION GUIDE
14
25TUBI A LED T8
LED TUBES T8
Photometric curves
Hi
gh T
8 EM
BOSS
ED 30
LUX m
3,0132 12,64
4,559 18,95
6,033 25,27
7,521 31,59
9,015 37,91
1,5529 6,32180
150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200
300
400
100
0
LUX m
3,0100 18,80
4,544 28,20
6,025 37,60
7,516 47,00
9,011 56,40
1,5400 9,40200
300250
150100500
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
60
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200
300
100
0
LUX m
3,093 19,26
4,541 28,90
6,023 38,53
7,515 48,16
9,010 57,79
1,5373 9,63120
Hi
gh T
8 OP
AL
30
LUX m
3,0107 15,31
4,547 22,97
6,027 30,62
7,517 38,28
9,012 45,93
1,5427 7,66180
150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200150
250300
1000
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200160120
240
800
LUX m
3,094 19,38
4,542 29,07
6,024 38,77
7,515 48,46
9,010 58,15
1,5377 9,69Diff.
High
T8
EMBO
SSED
30LUX m
3,086 12,64
4,522 18,95
6,014 25,27
7,510 31,59
9,015 37,91
1,5346 6,32180
150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200
300
400
100
0
LUX m
3,065 18,80
4,529 28,20
6,016 37,60
7,510 47,00
9,07 56,40
1,5262 9,40200
300250
150100500
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
60
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200
300
100
0
LUX m
3,061 19,26
4,527 28,90
6,015 38,53
7,510 48,16
9,07 57,79
1,5244 9,63120
Le curve fotometriche si riferiscono al modello lungo 1500 mm con colore luce LED bianco naturale (4000 K); Su richiesta vengono fatti i calcoli illuminotecnici per determinare il numero soddisfacente di prodotti utile a garantire il fabbisogno di luce richiestoPhotometric curves refer to the model 1500 mm with natural white LED light color (4000 K); Upon request, we make lighting calculations to determine the correct number of products useful to ensure the needs of light required
AccessoriesCavo di sicurezza in acciaio per tubi T8Steel security cable for T8 tubes
CODE: 98283
High T8 EMBOSSED CRI80
CODE
CODE
COLD WHITE C
6000K
NAT. WHITE N
4000K
WARM WHITE W
3000K
POTENZA NOMINALENOMINAL POWER
WATT
POTENZA TOTALETOTAL POWER
WATT
LUNGHEZZALENGHT
L.. OPTIC
CODE
95212 0,26 Kg 0,75 dm 95215 0,39 Kg 0,75 dm
+
1350 lm 1350 lm 1260 lm 12,0 W 13,5 W 590 mm 30
60
120
30
60
12
95213 0,43 Kg 1,47 dm 95216 0,57 Kg 1,47 dm 2730 lm 2730 lm 2540 lm 20,0 W 22,0 W 1200 mm +
95214 0,5 Kg 1,86 dm 95217 0,86 Kg 1,86 dm 4370 lm 4370 lm 4030 lm 35,0 W 38,5 W 1500 mm
High T8 EMBOSSED CRI92
CODE
CODE
NAT. WHITE N
4000K
WARM WHITE W
3000K
POTENZA NOMINALENOMINAL POWER
WATT
POTENZA TOTALETOTAL POWER
WATT
LUNGHEZZALENGHT
L.. OPTIC
CODE
94295 0,26 Kg 0,75 dm 94301 0,39 Kg 0,75 dm
+
1073 lm 990 lm 12,0 W 13,5 W 590 mm 30
60
120
30
60
12
94296 0,43 Kg 1,47 dm 94302 0,57 Kg 1,47 dm 2177 lm 2008 lm 20,0 W 22,0 W 1200 mm +
94297 0,5 Kg 1,86 dm 94303 0,86 Kg 1,86 dm 3101 lm 2860 lm 35,0 W 38,5 W 1500 mm
High T8 OPAL CRI80
CODE
CODE
COLD WHITE C
6000K
NAT. WHITE N
4000K
WARM WHITE W
3000K
POTENZA NOMINALENOMINAL POWER
WATT
POTENZA TOTALETOTAL POWER
WATT
LUNGHEZZALENGHT
L.. OPTIC
CODE
95218 0,26 Kg 0,75 dm 95221 0,39 Kg 0,75 dm
+
1350 lm 1350 lm 1260 lm 12,0 W 13,5 W 590 mm
+
30 30
95219 0,43 Kg 1,47 dm 95222 0,57 Kg 1,47 dm 2730 lm 2730 lm 2540 lm 20,0 W 22,0 W 1200 mm
Diffused 0095220 0,5 Kg 1,86 dm 95223 0,86 Kg 1,86 dm 4370 lm 4370 lm 4030 lm 35,0 W 38,5 W 1500 mm
DIFFUSORE GOFFRATOEMBOSSED DIFFUSER
DIFFUSORE GOFFRATOEMBOSSED DIFFUSER
DIFFUSORE OPALEOPAL DIFFUSER
CABLAGGIO CON DRIVER ESTERNOWIRING WITH EXTERNAL DRIVER
230V
33
L.
30
DRIVERAlimentatore non incluso
Driver not includedAlimentatori consigliatiRecommended dirvers
CABLAGGIO CON DRIVER INCORPORATOWIRING WITH BUILT-IN DRIVER
33230V
L.
30
DRIVER INCLUDEDAlimentatori incorporato
Built-in dirver
26
RiskExempt
80-92 08 40 35
-
26TUBI A LED T8
LED TUBES T8
DRIVERSALIMENTATORI PER TUBIDRIVERs FOR LED TUBES
ERAL dispone di un reparto di elettronica che si occupa dello studio, progettazione e realizzazione di schede elettroniche customizzate che vanno ad integrarsi perfettamente con i prodotti ERAL ga-rantendo una perfetta alimentazione, una ottima-le gestione e un preciso controllo dellillumina-zione a LED. ERAL proponeuna gamma completa di soluzioni per lalimentazione e la gestione dei prodotti a LED, con lobiettivo di offrire il giusto compromesso tra le esigenze di ingombro, affi-dabilit e costo. Particolare attenzione rivolta a tutti gli aspetti normativi quali la sicurezza elettrica, la compatibilit elettromagnetica, la produzione a basso impatto ambientale e il riciclaggio. Alta efficienza energetica e lun-ghissima durata dei prodotti assicurano un uso intelligente delle risorse energetiche nel rispetto dellambiente.Disponibili anche i kit Emergency che per-mettono di alimentare i tubi a LED in assen-za di tensione di rete (blackout) grazie ad un sistema elettronico intelligente e ad un pacco batterie.
ERAL has a department of electronics that specializes in the study, design and manu-facture of customized electronic boards which will be integrated perfectly with the ERAL products ensuring perfect feeding, optimal management and precise control of LED lighting. ERAL offers a complete ran-ge of solution for the power supplies and management of LED tube, by offering the right compromise in terms of size, reliabi-lity and cost. Particular attention has been paid on all standard requirements such as the electrical safety of the product, elec-tromagnetic compatibility, all this with a very low impact on the environment. The high energy efficency and the incredible long life of the products guarantee an intelligent use of the energy resources respecting the environment. Also avai-lable the Emergency kits, which allow to feed the LED tubes in absence of mains voltage (blackout) thanks to an intelligent electronic system and to a battery pack.
-
27TUBI A LED T8
LED TUBES T8
DRIVER 12W 1ch 50V 220mA
Alimentatore per tubi Top T8 di lunghezza 600mm. Limitazione della corrente istantanea in uscita per protezione del LED allaccensione. Protezione autoripristinante contro le sovratemperature, il sovraccarico, il circuito aperto e il corto-circuito sul secondario. Fissaggio tramite asole per viti. Sezione massima per cavo in ingresso e in uscita 2,5 mm. Utilizzare cavo PVC 2x1 mm H03VVH2-F.Power supply for Top T8 (only 600mm lenght) . Instant output current is limited when switching the LED on for LED protection purposes. Self-restoring system protec-tion against overtemperature, overload, open circuit and shortcircuit on the secondary circuit. Fix into place using screw slots. Maximum input and output cable cross-section: 2.5 mm. Use 2x1 mm H03VVH2-F PVC cable.
Potenza massima in uscita - Max output power 12 W
Tensione dingresso - Input voltage 190-250 V AC
Corrente di rete con 230V AC - Main voltage 230V AC 0,13 A
Tensione max sul secondario - Max output voltage 50 V
Efficienza a massimo carico - Max efficiency 84%
Fattore di Potenza - Power factor 0.6 C
Grado IP - IP Protection 40
Temperatura desercizio TA - TA Operating temperature -20...+50 C
Max temp. sul contenitore Tc - Max casing temperature TC 70 C
Immunit ai disturbi (surge) - Transient immunity (surge) EN6100-4-5 500V L-N, criteria BInterasse fori di fissaggio - Drilling fixing holes 107 mm
Peso - Weight 80 g.
CODE89161
Top T8 600 mm MAX 1 LED TUBE
10710127
48
DRIVER 25W 1ch 37V 720mA
Alimentatore per tubi Top T8 di lunghezza 1500mm.Range dingresso fino a 300VAC. Alta efficienza in qualsiasi condizione di carico. Fattore di potenza a 0,95. Protezione contro i disturbi in ingresso (surge) fino a 4KV. Protezione contro le sovratemperature, il sovraccarico, il circuito aperto e il corto-circuito sul secondario. Fissaggio tramite asole per viti. Sezione massima per cavo in ingresso e in uscita 2,5 mm. Utilizzare cavo PVC 2x1 mm H03VVH2-F.
Power supply for Top T8 LED tubes (only 1500mm lenght). Input range up to 300VAC. High efficiency in every kind load conditions. Power factor 0,95. Protection against input transient (surge) up to 4KV. System protection against overtemperature, overload, open circuit and shortcircuit on the secondary circuit. Fix into place using screw slots. Maximum input and output cable cross-section: 2.5 mm. Use 2x1 mm H03VVH2-F PVC cable.
Potenza massima in uscita - Max output power 25 W
Tensione dingresso - Input voltage 180-300 V AC
Corrente di rete con 230V AC - Main voltage 230V AC 0,15 A
Tensione d uscita a max. carico - Output voltage with max. load 37 V
Efficienza a massimo carico - Max efficiency 90%
Fattore di Potenza - Power factor 0.95
Grado IP - IP Protection 40
Temperatura desercizio TA - TA Operating temperature -20...+50 C
Max temp. sul contenitore Tc - Max casing temperature TC 70 C
Immunit ai disturbi (surge) - Transient immunity (surge) EN6100-4-5 4KV L-N, criteria BInterasse fori di fissaggio - Drilling fixing holes 94,5 mm
Peso - Weight 110 g.
CODE99147
MAX 1 LED TUBETop T8 1500 mm
10394,527
58
DRIVER 35W 1ch 37V 950mA
Alimentatore per tubi High T8 di lunghezza 1500mm.Range dingresso fino a 300VAC. Alta efficienza in qualsiasi condizione di carico. Fattore di potenza a 0,95. Protezione contro i disturbi in ingresso (surge) fino a 4KV. Protezione contro le sovratemperature, il sovraccarico, il circuito aperto e il corto-circuito sul secondario. Fissaggio tramite asole per viti. Sezione massima per cavo in ingresso e in uscita 2,5 mm. Utilizzare cavo PVC 2x1 mm H03VVH2-F.
Power supply for High T8 LED tubes (only 1500mm lenght). Input range up to 300VAC. High efficiency in every kind load conditions. Power factor 0,95. Protection against input transient (surge) up to 4KV. System protection against overtemperature, overload, open circuit and shortcircuit on the secondary circuit. Fix into place using screw slots. Maximum input and output cable cross-section: 2.5 mm. Use 2x1 mm H03VVH2-F PVC cable.
Potenza massima in uscita - Max output power 35 W
Tensione dingresso - Input voltage 180-300 V AC
Corrente di rete con 230V AC - Main voltage 230V AC 0,18 A
Tensione d uscita a max. carico - Output voltage with max. load 37 V
Efficienza a massimo carico - Max efficiency 90%
Fattore di Potenza - Power factor >0.95
Grado IP - IP Protection 40
Temperatura desercizio TA - TA Operating temperature -20...+50 C
Max temp. sul contenitore Tc - Max casing temperature TC 70 C
Immunit ai disturbi (surge) - Transient immunity (surge) EN6100-4-5 4KV L-N, criteria BInterasse fori di fissaggio - Drilling fixing holes 94,5 mm
Peso - Weight 110 g.
CODE99146
MAX 1 LED TUBEHigh T8 1500 mm
10394,527
58
SMART
AVE
SMART
AVE
-
28TUBI A LED T8
LED TUBES T8
DRIVERSALIMENTATORI PER TUBI DRIVERs FOR LED TUBES
DRIVER 22W 350/500/630mA 1-10VAlimentatore per tubi High T8 e Top T8 di lunghezza 600/1200mm. Regolazione tramite interfaccia 1-10V, potenzio-metro o pulsante normalmente aperto. Selezione della corrente di uscita tramite morsetto dedicato. Protezione contro i disturbi in ingresso (surge) fino a 2KV. Protezione autoripristinante contro le sovratemperature, il sovraccarico, il circuito aperto e il corto-circuito sul secondario. Fissaggio tramite asole per viti. Sezione massima per cavo in ingresso e in uscita 2,5 mm. Utilizzare cavo PVC 2x1 mm H03VVH2-F.Power supply for High T8 and Top T8 (only for 600 /1200mm LED tubes lenght). Regulation by 1-10V, potentiometer or normally open button. Output current selectable by connecto. Protection against input transient (surge) up to 2KV. Self-restoring system protection against overtemperature, overload, open circuit and shortcircuit on the secondary circuit. Fix into place using screw slots. Maximum input and output cable cross-section: 2.5 mm. Use 2x1 mm H03VVH2-F PVC cable.
Potenza massima in uscita - Max output power 22 W
Tensione dingresso - Input voltage 190-250 V AC
Corrente di rete con 230V AC - Main voltage 230V AC 0,15 A
Tensione max sul secondario - Max output voltage 48 V DC
Efficienza a massimo carico - Max efficiency 87%
Fattore di Potenza - Power factor 0.96
Grado IP - IP Protection 40
Temperatura desercizio TA - TA Operating temperature -20...+50 C
Max temp. sul contenitore Tc - Max casing temperature TC 70 C
Immunit ai disturbi (surge) - Transient immunity (surge) EN6100-4-5 2KV L-N, criteria B
Interasse fori di fissaggio - Drilling fixing holes 195 mm
Peso - Weight 160 g.
24,4
210
Sync
230V AC48,2
1-10V control unitor N.O. button
L. High T8 Top T8590mm 1 (350mA) 2 (350mA)
1200mm 1 (500mA) 1 (500mA)
1500mm NO NO
High T8
L
Top T8
L
CODE99115
1-10V
DRIVER 40W 720/1000mA 1-10V
Alimentatore per tubi High T8 e Top T8 (vedi tabella). Regolazione tramite interfaccia 1-10V o potenziometro. Selezione della corrente di uscita tramite jumper. Protezione contro i disturbi in ingresso (surge) fino a 2KV. Protezione autoripristinante contro le sovratemperature, il sovraccarico, il circuito aperto e il corto-circuito sul secondario. Fissaggio tramite asole per viti. Sezione massima per cavo in ingresso e in uscita 2,5 mm. Utilizzare cavo PVC 2x1 mm H03VVH2-F.
Power supply for High T8 and Top T8 (see table). Regulation by 1-10V or potentiometer. Output current selectable by jumper. Protection against input transient (surge) up to 2KV. Self-restoring system protection against overtemperature, overload, open circuit and shortcircuit on the secondary circuit. Fix into place using screw slots. Maximum input and output cable cross-section: 2.5 mm. Use 2x1 mm H03VVH2-F PVC cable.
Potenza massima in uscita - Max output power 40 W
Tensione dingresso - Input voltage 190-250 V AC
Corrente di rete con 230V AC - Main voltage 230V AC 0,20 A
Tensione max sul secondario - Max output voltage 48 V DC
Efficienza a massimo carico - Max efficiency 86%
Fattore di Potenza - Power factor 0.95
Grado IP - IP Protection 40
Temperatura desercizio TA - TA Operating temperature -20...+50 C
Max temp. sul contenitore Tc - Max casing temperature TC 90 C
Immunit ai disturbi (surge) - Transient immunity (surge) EN6100-4-5 2KV L-N, criteria B
Interasse fori di fissaggio - Drilling fixing holes 197 mm
Peso - Weight 210 g.
L. High T8 Top T8590mm 2 (720mA) NO
1200mm 2 (1000mA) 2 (1000mA)
1500mm 1 (1000mA) 1 (720mA)
CODE99148
High T8
L
Top T8
L89
40
208
196,7
230V AC
1-10V Sink/SourceControl Unit
or Potentiometer100 Kohm
-
29TUBI A LED T8
LED TUBES T8
DRIVERSALIMENTATORI PER TUBIDRIVERs FOR LED TUBES
DRIVER 24W 350/500/600mA
Alimentatore per tubi High T8 e Top T8 di lunghezza 600/1200mm. Dotato di regolazione di corrente tramite selet-tore. Protezione autoripristinante contro le sovratemperature, il sovraccarico, il circuito aperto, i corto-circuiti sul secondario e le sovratensioni in ingresso. Fattore di potenza >0,95. Alta efficienza in condizione di basso carico. Basso assorbimento in stand-by (0.95. High efficiency under light-load conditions. Low power absorption in stand-by mode (
-
30TUBI A LED T8
LED TUBES T8
HOW TO...COLLEGAMENTO TUBI WIRING LED TUBES
ADEGUAMENTO IMPIANTO TRADIZIONALE AL NEON PER UTILIZZO DEI Top T8 E High T8 ADJUSTMENT OF THE CONVENTIONAL NEON SYSTEM FOR USE OF Top T8 E High T8
OLD LAMP
90
CLOSE
LED TUBE
OPEN
LED TUBE
LED
ISTRUZIONIINSTRUCTIONS
Assicurarsi che il prodotto sia scollegato dalla rete elettricaMake sure that the mains supply voltage is disconnected
Rimuovere la lampada tradizionale (1-2)Remove the conventional lamp (1-2)
Sostituire lo starter tradizionale (3-4)con il LEDstarter ERAL incluso (5-6)Replace the old starter (3-4) with the included ERAL LEDstarter (5-6)
Inserire il tubo a LED ERAL e bloccare la sicura (7-8)Insert the tube LED ERAL and blocks the safety (7-8)
Note: funziona solamente con reattori ferromagnetici, non con alimentatori elettroniciNote: it works only with ferromagnetic ballasts, not with electronic power supplies
LEDTUBE
230V
LEDSTARTER
REACTOR230V
DOUBLE LEDTUBE
LEDSTARTERLEDSTARTER
REACTOR REACTOR
Top T8 / High T8 Top T8 / High T8 Top T8 / High T8
ADEGUAMENTO IMPIANTO TRADIZIONALE AL NEON PER UTILIZZO DEI Oval T8 ADJUSTMENT OF THE CONVENTIONAL NEON SYSTEM FOR USE OF Oval T8
OLD LAMP
90
CLOSE
LED TUBE
OPEN
LED TUBE
ISTRUZIONIINSTRUCTIONS
Assicurarsi che il prodotto sia scollegato dalla rete elettricaMake sure that the mains supply voltage is disconnected
Rimuovere la lampada tradizionale (1-2)Remove the conventional lamp (1-2)
Eliminare lo starter tradizionale (3-4) Remove the old starter (3-4)
Inserire il tubo a LED ERAL e bloccare la sicura (5-6)Insert the tube LED ERAL and blocks the safety (5-6)
Note: funziona solamente con reattori ferromagnetici, non con alimentatori elettroniciNote: it works only with ferromagnetic ballasts, not with electronic power supplies
LEDTUBE
230VREACTOR
230V
DOUBLE LEDTUBE
REACTOR REACTOR
Oval T8 Oval T8 Oval T8
ATTENZIONEConsigliabile rimuovere il condensatore di rifasamento e il ballast elettromagnetico (reattore) se presenti in modo da ottenere il massimo del rendimento dellalimentatore (vedi grafici)
ATTENTIONAdvisable to remove the capacitor and the electromagnetic ballast (reactor) if present in order to obtain the best performance of the power supply (see charts)
Rendimento del driver per tubo a LED (HIGHT8 1200mm)Performance of driver for LED tube (HIGHT8 1200mm)
Rendimento del driver per tubo a LED (HIGHT8 1500mm)Performance of driver for LED tube (HIGHT8 1500mm) La presenza del ballast elettromagnetico, pur
non innescando fenomeni distruttivi, degrada le prestazione dei driver in termini principalmente di rendimento.Per giustificare la diminuzione di rendimento bisogna considerare le perdite nel rame degli avvolgimenti del ballast. Assolutamente da consigliare la rimozione del condensatore di rifasamento presente spesso nelle lampade fluorescenti con potenze superiori a 36,0 W poich, come si nota dai grafici, degra-da notevolmente i parametri di merito del driver.
The presence of electromagnetic ballast degrades the performance of the main drivers in terms of per-formance.To justify the decrease of efficiency must consider the losses in the copper of the windings of the ballast.Absolutely to recommend the removal of the capaci-tor often present in fluorescent lamps with 36,0 W po-wer above because, as can be seen from the graphs, degrades significantly on the parameters of the driver.
-
31TUBI A LED T8
LED TUBES T8
EXAMPLESESEMPI DI COLLEGAMENTO TUBI
WIRING EXAMPLES LED TUBES
ESEMPI DI COLLEGAMENTO DEI LED TUBES T8WIRING EXAMPLES OF LEDTUBES T8
High T8, Top T8 - driver inclusoHigh T8, Top T8 - driver included
High T8 / Top T8230V
Oval T8 - driver inclusoOval T8 - driver included
230V 230VOval T8
Top T8 - driver non inclusoTop T8 - driver not included
230VCODE 89161
Top T8 590mm
Top T8 590mm+ -
+ -
Driver 350mA
High T8, Top T8 - driver non inclusoHigh T8, Top T8 - driver not included
230V
Top T8 / High T8 1200mm+ -
Driver 500mA
High T8, Top T8 - driver non inclusoHigh T8, Top T8 - driver not included
Top T8 1500mm 99147High T8 1500mm 99146
230V Driver
+ -
Top T8 - driver non inclusoTop T8 - driver not included
CODE 89161
350mA230V
Top T8 590mm+ -
Driver
-
32TUBI A LED T8
LED TUBES T832TUBI A LED T8
LED TUBES T8
KIT EMERGENCY1ch 48V 850/700/500mA
KIT con sistema elettronico di emergenza (solo per tubi a LED senza driver integrato)
KIT with emergency electronic system (only for LEDtubes without integrated driver)
Tensione nominale di ingresso Nominal input voltage
190-250 V AC260-360 V DC
Frequenza Frequency 50-60 Hz
Corrente di ingresso Nominal input current
0,18 A (30 A corrente di spunto con accensione a freddo)0,18 A (30 A inrush current with cold start)
Tensione di uscita (a vuoto) Outout voltage (without load) 48V
Fattore di PotenzaPower factor 0.9 C
Grado IPIP Protection 20
Temperatura desercizio TATA Operating temperature -20 +50 C
Max temp. sul contenitore TcMax casing temperature TC 90 C
Interfaccia di controlloControl interface Switch Line, Rest mode
ProtezioniProtections
Termica, sovraccarico, sovratenzione, cortocircuito, circuito apertoOvertemperature, overload, overvoltage, short-circuit, open circus
Corrente di caricaCharg current 150 mA (initial), 500 mA (power), 50 mA (trickle)
Corrente in uscita in emergenzaEmergency output current 110 mA
Tempo massimo di ricarica batteria Emergency output current 7 h
Normative di riferimento Reference norms
EN 55015 (+A1+A2), EN 61000-3-3 (+A1), EN 61000-3-2 (+A2), EN 61547 (+A1), EN60598-2-22, EN61951-2, CEI EN 61347-1, CEI EN 61347-2-13, CEI EN 50366
44
30
317
CAPACIT BATTERIA (INCLUSA)BATTERY CAPACITY (INCLUDED)
CORRENTECURRENT
TIPO DI TUBOTUBE TYPE
LUNG. TUBOTUBE LENGHT
DRIVER POWER
ITEMCODE
1600 mA/h 500 mA
High T8 1200 mm
432 g 20 W 99120Top T8 1200 mm
1600 mA/h 700 mA Top T8 1500 mm 432 g 25 W 99121
1600 mA/h 850 mA High T8 1500 mm. 432 g 30 W 99122
ACCESSORIO BATTERIABATTERY ACCESSORY
CAPACIT BATTERIABATTERY CAPACITY
VOLT VOLT
ITEMCODE
BATTERIA MAGGIORATAHIGHER BATTERY
2400 mA/h 7,2V 99067
BATTERIA DI RICAMBIOSPARE BATTERY
1600 mA/h 7,2V 99063
Emergencyline
DRIVERSKIT EMERGENZA PER TUBI T8 EMERGENCY KIT FOR LED TUBES T8
-
33TUBI A LED T8
LED TUBES T8 33TUBI A LED T8
LED TUBES T8
EXAMPLESESEMPI DI COLLEGAMENTO KIT
KIT WIRING EXAMPLES
EMERGENCYKit -
-+
+
NiMH Battery PackAA 7.2V, 1600mAh
N
N
SL
L
L
High T8 / Top T8QUAD
RO E
LETT
RICO
ELEC
TRIC
CAB
INET
I1
DriverL
N
High T8 / Top T8
Il Kit Emergency permette il funzionamento in modalit safe: in presenza della tensione di rete attraverso linterruttore I1 possibile accendere e spegnere tutti i tubi a LED. Le lampade connesse al Kit Emergency si attivano in modalit emergenza solo quando viene a mancare la tensione di rete.The Kit Emergency allows the safe operation mode: in the presence of main voltage through the switch I1 you can turn on and turn off all LED tubes. The lamps connected to the Kit Emergency are activated in emergency mode only when there is no mains voltage.
MODALIT SAFESAFE MODE
EMERGENCYKit -
-+
+
NiMH Battery PackAA 7.2V, 1600mAh
N
N
SL
L
L
High T8 / Top T8QUAD
RO E
LETT
RICO
ELEC
TRIC
CAB
INET
I1
DriverL
N
High T8 / Top T8
Il Kit Emergency permette il funzionamento in modalit permanente: in presenza della tensione di rete la lampada LED connessa al Kit Emergency sempre accesa. Attraverso linterruttore I1 possibile spegnere e accendere le lampade LED connesse ai restanti alimentatori LED.The Kit Emergency allows the maintained operation mode: the LED lamp connected to the Kit Emergency is always switched on. The I1 switch allows to switch on and off the LED tubes connected to remaining LED drivers.
MODALIT S.A.S.A. MODE
EMERGENCYKit -
-+
+
NiMH Battery PackAA 7.2V, 1600mAh
N
N
SL
L
L
High T8 / Top T8QUAD
RO E
LETT
RICO
ELEC
TRIC
CAB
INET
I1
DriverL
N
High T8 / Top T8
Il Kit Emergency permette il funzionamento in modalit non permanente: in modalit S.E. (solo emergenza), in presenza della tensione di rete la lampada LED connessa al Kit Emergency sempre spenta. Attraverso linterruttore I1 possibile spegnere e accendere le lampade LED connesse ai restanti alimentatori LED.The Kit Emergency allows the non-maintained operation mode: the LED lamp connected to the Kit Emergency switches on only in the event of power supply failure, otherwise it is always switched off. The I1 switch allows the LED lamps connected to the remaining LED power supply units to be switched on and off.
MODALIT S.E.S.E. MODE
-
34PLAFONIERE E INCASSI
RECESSED & CEILING LIGHTS
PLAFONIERE E INCASSI SMD LEDs
RECESSED &CEILING LAMPS SMD LEDs
-
35PLAFONIERE E INCASSI
RECESSED & CEILING LIGHTS
Top WIRED 38
High WIRED 42
Top PROTECTION 46
High PROTECTION 52
Top PROTECTION WIRED 56
High PROTECTION WIRED 60
Aline SINGLE 66
Aline DOUBLE 66
Alix SINGLE 72
Alix DOUBLE & DOUBLE slim 74
Alix QUICK SINGLE 76
Alix QUICK DOUBLE & DOUBLE slim 78
Alix QUICK XL 80
Acix QUICK 86
Alus 90
-
36PLAFONIERE E INCASSI
RECESSED & CEILING LIGHTS
PRODOTTO INSTALLATOINSTALLED PRODUCT
High WIRED
ACCESSORIOACCESSORY
-
37PLAFONIERE E INCASSI
RECESSED & CEILING LIGHTS
Parcheggio aeroporto Marco Polo, VeneziaParking Marco Polo Airport, Venice
Parcheggio aeroporto Marco Polo, VeneziaParking Marco Polo Airport, Venice
IERIYESTERDAY
OGGITODAY
Le nostre lampade non hanno bisogno di riflettori come le comuni plafoniere poich il flusso luminoso dei LED gi direzionato da una ottica incorporata; non si hanno cosi perdite dovute alla inefficiente riflessione causata dallaccumulo di polvere e condensa di fumi che diminuiscono drasticamente lefficienza della lampada con parabole, recuperatori di flusso o riflettori (se non protetti da schermo).
Our lamps do not need reflectors as on the common ceiling lamps because the luminous flux of LEDs is already directed by a built-in optic, so there are no losses due to inefficient reflection caused by the accumulation of dust and condensation of smoke that drastically
reduced the efficiency of the lamp with parables, recuperators of luminous flux or reflectors (if not protected by the screen).
Parcheggio aereoporto Marco Polo, VeneziaParking Marco Polo Airport, Venice
-
38PLAFONIERE E INCASSI
RECESSED & CEILING LIGHTS
FINO A
3130LUMEN
INFO
RMAZ
IONI
PRO
DOTT
OPR
ODUC
T IN
FORM
ATIO
N
220~240V AC
Collegabile direttamente alla presa elettricaDirectly connectable to the electrical outlet
SPINA NON INCLUSAPLUG NOT INCLUDED
CARATTERISTICHE COSTRUTTIVECONSTRUCTION FEATURES
IlluminotecnicheIlluminotechnicalPlafone tubolare a LED dotato di sorgente luminosa composta da SMD power LEDs di ultima generazione; diodi montati su PCB (circuito stampato). Equipaggiato di ottiche per la canalizzazione del fascio luminoso, a scelta fra 30, 60 e 120 poste allinterno della lampada sotto il diffusore esterno (goffrato o opalino). Sistema ottico brevettato. Versione con diffusore goffrato disponibile con LED ad alto indice di resa cromatica (CRI92).Tubular ceiling LED light equipped with light source composed of SMD power LEDs of the latest generation; diodes mounted on PCB. Featuring with optics for the channeling of the light beam, to be chosen between 30, 60 and 120 placed into the lamp under the external diffuser (embossed or opal). Patented optical system. Embossed diffuser version available with high color rendering index LEDs (CRI92).
MeccanicheMechanicalProfilo in alluminio anodizzato 6060 con copertura in policarbonato disponibile nelle versioni goffrata o opalina. Possibili installazioni a plafone su muratura o blindosbarra tramite diversi accessori. Anodized aluminum 6060 profile with polycarbonate cover in two different versions: embossed or opaline. A surface-mount installation on wall or busbar trunking system is possible thanks to several accessories.
ElettricheElectricalAlimentazione integrata per collegamento diretto alla rete elettrica.Integrated power supply for direct connection to the mains is recommended.
Top wiredPLAFONIERA A TUBOCEILING LIGHT TUBE
FINO A
3130LUMEN
DIFFUSORE GOFFRATOEMBOSSED DIFFUSER
DIFFUSORE OPALEOPAL DIFFUSER
DIFFUSORE GOFFRATOEMBOSSED DIFFUSER
DIFFUSORE OPALEOPAL DIFFUSER
Le nostre lampade non hanno bisogno di riflettori come le comuni plafoniere poich il flusso luminoso dei LED gi direzionato; non si hanno cosi perdite dovute alla inefficiente riflessione. Our lamps do not need reflectors as on the common ceiling lamps because the luminous flux of LEDs is already directed; so you do not have losses due to inefficient reflection.
38PLAFONIERE E INCASSI
RECESSED & CEILING LIGHTS
-
CODE+
COLOR +
OPTIC
GUIDA COMPOSIZIONE CODICE / CODE COMPOSITION GUIDE
14
39PLAFONIERE E INCASSI
RECESSED & CEILING LIGHTS
230V
2X1 mm2 PVC31,5 30
L. 25
Alimentatori incorporatoBuilt-in dirver
31,5
230V
2X1 mm2 PVC30
L.
Alimentatori incorporatoBuilt-in dirver
Photometric curves
To
p W
IRED
EM
BOSS
ED
30
LUX m
3,0101 9,99
4,545 14,98
6,025 19,97
7,516 24,96
9,011 29,96
1,5403 4,99180
150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
600800
1000
400200
0
LUX m
3,073 18,80
4,532 28,20
6,018 37,60
7,512 47,00
9,08 56,40
1,5291 9,40200
300250
150100500
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
60
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200160120
240
8040
0
LUX m
3,065 18,91
4,529 28,37
6,016 37,83
7,510 47,29
9,07 56,74
1,5261 9,46120
To
p W
IRED
OPA
L
30
LUX m
3,078 15,31
4,535 22,97
6,019 30,62
7,512 38,28
9,09 45,93
1,5311 7,66180
150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200150
250300
1000
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200160120
240
800
LUX m
3,069 19,38
4,530 29,07
6,017 38,77
7,511 48,46
9,08 58,15
1,5274 9,69Diff.
Top
WIR
ED E
MBO
SSED 30
LUX m
3,071 12,64
4,531 18,95
6,018 25,27
7,511 31,59
9,08 37,91
1,5282 6,32180
150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200
300
400
100
0
LUX m
3,053 18,80
4,524 28,20
6,013 37,60
7,59 47,00
9,06 56,40
1,5213 9,40200
300250
150100500
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
60
180150
120
90
60
300
30
60
90
120
150
C 0 - C 180 C 90 - C 270
200160120
240
8040
0
LUX m
3,048 18,91
4,521 28,37
6,012 37,83
7,58 47,29
9,05 56,74
1,5192 9,46120
Le curve fotometriche si riferiscono al modello lungo 1495 mm con colore luce LED bianco naturale (4000 K); Su richiesta vengono fatti i calcoli illuminotecnici per determinare il numero soddisfacente di prodotti utile a garantire il fabbisogno di luce richiestoPhotometric curves refer to the model 1495 mm with natural white LED light color (4000 K); Upon request, we make lighting calculations to determine the correct number of products useful to ensure the needs of light required
RiskExempt
1 m 80-92 40-44 08 35
AccessoriesMolla a clipClip spring
1x
CODE:99226
Molla a clip con raccordoClip spring with joint
1xCODE:99227
Attacco con serraggio di sicurezzaAttack with locking device
1xCODE:99228
Consigliamo linstallazione di ogni singolo articolo con almeno due accessori di fissaggioWe recommend the installation of each item with at least two fixing accessories
Top WIRED EMBOSSED CRI80
CODE CODE
COLD WHITE C
6000K
NAT. WHITE N
4000K
WARM WHITE W
3000K
POTENZA NOMINALENOMINAL POWER
WATT
POTENZA TOTALETOTAL POWER
WATT
LUNGHEZZALENGHT
L.. OPTIC
CODE
95224 95227 0,47 Kg 0,75 dm 975 lm 975 lm 910 lm 8,0 W 9,0 W 585 mm
+
30
60
120
30
60
12
95225 95228 0,64 Kg 1,47 dm + 2185 lm 2185 lm 2015 lm 17,5 W 19,0 W 1195 mm
95226 95229 0,94 Kg 1,86 dm 3130 lm 3130 lm 2880 lm 24,5 W 27,0 W 1495 mm
Top WIRED OPAL CRI80
CODE CODE
COLD WHITE C
6000K
NAT. WHITE N
4000K
WARM WHITE W
3000K
POTENZA NOMINALENOMINAL POWER
WATT
POTENZA TOTALETOTAL POWER
WATT
LUNGHEZZALENGHT
L.. OPTIC
CODE
95230 95233 0,47 Kg 0,75 dm 975 lm 975 lm 910 lm 8,0 W 9,0 W 585 mm
+
30 30
95231 95234 0,64 Kg 1,47 dm + 2185 lm 2185 lm 2015 lm 17,5 W 19,0 W 1195 mm
Diffused 0095232 95235 0,94 Kg 1,86 dm 3130 lm 3130 lm 2880 lm 24,5 W 27,0 W 1495 mm
DIFFUSORE GOFFRATOEMBOSSED DIFFUSER
Top WIRED EMBOSSED CRI92
CODE CODE
NAT. WHITE N
4000K
WARM WHITE W
3000K
POTENZA NOMINALENOMINAL POWER
WATT
POTENZA TOTALETOTAL POWER
WATT
LUNGHEZZALENGHT
L.. OPTIC
CODE
94896 94899 0,47 Kg 0,75 dm
+
695 lm 650 lm 8,0 W 9,0 W 585 mm
+
30
60
120
30
60
12
94897 94900 0,64 Kg 1,47 dm 1542 lm 1440 lm 17,5 W 19,0 W 1195 mm
94898 94901 0,94 Kg 1,86 dm 2262 lm 2112 lm 24,5 W 27,0 W 1495 mm
DIFFUSORE GOFFRATOEMBOSSED DIFFUSER
DIFFUSORE OPALEOPAL DIFFUSER
-
220~240V AC
PRODOTTO INSTALLATOINSTALLED PRODUCT
High wired
ACCESSORIOACCESSORY
220~240V AC
PRODOTTO INSTALLATOINSTALLED PRODUCT
ACCESSORIOACCESSORY
High wired
40PLAFONIERE E INCASSI
RECESSED & CEILING LIGHTS
ESEMPIO DI INSTALLLAZIONE SU BLINDOSBARRAEXAMPLE OF INSTALLATION ON BUSBAR
ESEMPIO DI INSTALLLAZIONE SUPERFICIE IN LEGNO EXAMPLE OF WOOD SURFACE INSTALLATION
-
41PLAFONIERE E INCASSI
RECESSED & CEILING LIGHTS
Installazione abitazione privata, Santa Lucia (TV)Installation in a private home, Santa Lucia (TV)
41PLAFONIERE E INCASSI
RECESSED & CEILING LIGHTS
Parcheggio Happy Fit, VicenzaParking Happy Fit, Vicenza
-
42PLAFONIERE E INCASSI
RECESSED & CEILING LIGHTS
FINO A
4370LUMEN
FINO A
4370LUMEN
INFO
RMAZ
IONI
PRO
DOTT
OPR
ODUC
T IN
FORM
ATIO
N
220~240V AC
Collegabile direttamente alla presa elettricaDirectly connectable to the electrical outlet
SPINA NON INCLUSAPLUG NOT INCLUDED
DIFFUSORE GOFFRATOEMBOSSED DIFFUSER
DIFFUSORE OPALEOPAL DIFFUSER
CARATTERISTICHE COSTRUTTIVECONSTRUCTION FEATURES
IlluminotecnicheIlluminotechnicalPlafone tubolare a LED dotato di sorgente luminosa composta da SMD power LEDs di ultima generazione; diodi montati su PCB (circuiti stampati). Equipaggiato di ottiche per la canalizzazione del fascio luminoso, a scelta fra 30, 60 e 120 poste allinterno della lampada sotto il diffusore esterno (goffrato o opalino). Sistema ottico brevettato. Versione con diffusore goffrato disponibile con LED ad alto indice di resa cromatica (CRI92).Tubular ceiling LED light equipped with light source composed of SMD power LEDs of the latest generation; density diodes mounted on PCB. Featuring with optics for the channeling of the light beam, to be chosen between 30, 60 and 120 placed into the lamp under the external diffuser (embossed or opal). Patented optical system. Embossed diffuser version available with high color rendering index LEDs (CRI92).
MeccanicheMechanicalProfilo in alluminio (6060) anodizzato con copertura in policarbonato disponibile nelle versioni goffrata o opalina. Possibili installazioni a plafone su muratura o blindosbarra tramite diversi accessori. Anodized aluminum (6060) profile with polycarbonate cover in two different versions: embossed or opaline. A surface-mount installation on wall or busbar trunking system is possible thanks to several accessories.
ElettricheElectricalAlimentazione integrata per collegamento diretto alla rete elettrica.Integrated power supply for direct connection to the mains is recommended.
DIFFUSORE GOFFRATOEMBOSSED DIFFUSER
DIFFUSORE OPALEOPAL DIFFUSER
High wiredPLAFONIERA A TUBOCEILING LIGHT TUBE
Le nostre lampade non hanno bisogno di riflettori come le comuni plafoniere poich il flusso luminoso dei LED gi direzionato; non si hanno cosi perdite dovute alla inefficiente riflessione. Our lamps do not need reflectors as on the common ceiling lamps because the luminous flux of LEDs is already directed; so you do not have losses due to inefficient reflection.
42PLAFONIERE E INCASSI
RECESSED & CEILING LIGHTS
-
CODE+
COLOR +
OPTIC
GUIDA COMPOSIZIONE CODICE / CODE COMPOSITION GUIDE
14
43PLAFONIERE E INCASSI
RECESSED & CEILING LIGHTS
230V
2X1 mm2 PVC31,5 30
L. 25
Alimentatori incorporatoBuilt-in dirver
31,5
230V
2X1 mm2 PVC30
L.
Alimentatori incorporatoBuilt-in dirver
Photometric curves
Hi
gh W
IRED
EM
BOSS
ED
30
LUX m
3,0132 12,64
4,559 18,95
6,033 25,27
7,521 31,59
9,015 37,91
1,5529 6,32180
150
120
90
60
300
30
60
90
120