Green Product Chemical Substances...

Version: 12

Primax Electronics LTD.

Green Product Chemical Substances Specification PAGE： 1 OF 31

Green Product Chemical Substances Specification –v12 Document No.: QW-5Q002 Level of Secret ■Common□confidential

Green Product Chemical Substances Specification

Approver Reviewer Issuer Department

By Honda Lee Jay Yung PDTC

Date 01/02/2013 01/02/2013

Version: 12




Version Date Change Content Issuer Approver

1.0 8/29/2003 Original Issue Hongdar Kuo LY Wang

2.0 12/15 / 2003 Title, Scope, Spec and requirement Hongdar Kuo Honda Lee

2.1 12/30 / 2003 Spec update Hongdar Kuo Honda Lee

2.2 1/15 / 2004 Revise testing method, spec and wording

Hongdar Kuo Honda Lee

3.0 9/29/2004 Revise testing method and update spec. Add heat resistance requirements for lead-free component

Jay Yung Honda Lee

4.0 11/21/2005

1. Revise testing method and update spec.

2. Add Primax’s purchasing policy. 3. Add homogenous materials

definition and survey requirement. 4. Add Br and Cr3+ survey

requirements.

Jay Yung Honda Lee

5 05/08/2006 Item 5.2 increase third-party test report deadline

Jay Yung Honda Lee

6 12/26/2006

1. Revise testing method and update spec

2. Revise 6.3.1(b) disassembling guideline for small parts

Jay Yung Honda Lee

7 10/01/2007

1. Add Halogen-Free requirement and testing method. (see items 4.8, 5.2, 5.7, 5.8, 5.9, 6.4, and Appendix 1 C99064)

2. Add PFCs prohibited substance

Jay Yung Honda Lee

8 12/03/2008

1. Increase item 3 reference documents.

2. Revise testing method and update spec.

3. Add REACH SVHC (see item 6.5), PFOA, Toluene, Cyclododecane restricted/managed substance

4. Add item 5.8 requirement.

Jay Yung Honda Lee

9 12/08/2009

1. Modify item 5 requirement content and add battery requirement.

2. Revise Phthalate’s Threshold. 3. Add DMF banned substance. 4. Add REACH SVHC (see item 6.4).

Jay Yung Honda Lee

Version: 12




10 11/16/2010

1. Add REACH SVHC (see item 6.4)2. Add

Phenol,2-(2H-benzotriazol-2-yl)-4,6-bis(1,1-dimethylethyl), DnPP, DIBP, HBCDD restricted/managed substance

3. Revise restriction of Brominated Flame Retardants, As and Be

4. Revise exemption of Pb, Cd, Hg 5. Separate battery requirement (item

6.2.8)

Jay Yung Honda Lee

11 12/06/2011

1. Add DBT , DOT, Cadmium chromate restricted substance

2. Add test report requirements. (item 6.4, 8)

3. Increase item 4.9, 4.11 and revise item 1 and item 5.

Jay Yung Honda Lee

12 01/02/2013

1. Increase item 3.6. 2. Revise item 5.2. 3. Phthalates/HBCDD in item 5.7, 5.8

were deleted. 4. Increase item 5.10. 5. DIBP change from Level Ⅲ to

Level I. 6. Revise CAS Num. of Chlordane.

Jay Yung Honda Lee

Version: 12




1 PURPOSE

This specification describes chemical substances (environment-related substances) contained in the

parts and materials used for Primax Electronic Ltd. products (including DONGGUANG PRIMAX

ELECTRONICS & TELECOMMUNICATION PRODUCTS LTD., PRIMAX ELECTRONICS (KS)

CORP. LTD., PRIMAX ELECTRONICS (CHONGQING) CORP. LTD. And the aforementioned

company in the present and future, directly or indirectly established in countries around the subsidiaries,

affiliates or owned the factories, offices and other business organizations) (referred here after as

Primax). It clearly clarifies banned substances, restricted substances and managed substances so that

impact to the environment can be minimized and achieve the goal of enterprise sustainable

development.

1.1 Primax Green Product Policy:

Primax commits to actively participating in the protection of global environment, implementing

green designs and green management to fulfill our duties as a global citizen, while providing

excellent products and services.

2 SCOPE

2.1 Products are designed, purchased, manufactured, and sold by Primax. Products and parts are

provided by Primax’s suppliers or outsourced contractors.

2.2 Parts, materials and other items used for Primax’s and OEMs’ products are:

‧Assemblies: including function units, modules, and board assemblies.

‧Accessories: for using products such as remote controls, AC adopters, and batteries, etc.

‧Parts: including electronic/electrical parts, mechanical parts, electro-mechanical parts, printed

circuit boards (PWBs), recording media, packaging materials and packaging components.

‧Auxiliary materials: such as adhesives, solder materials, and tapes.

‧Substances are used in process, such as fluxes and washing solutions.

‧Repair parts.

‧Packaging materials are used for transport/protection by part suppliers.

3 REFERENCE DOCUMENTS

3.1 JIG-101 Ed 2.0: Joint Industry Guide: Material Composition Declaration for Electrotechnical

Products

Version: 12




3.2 Regulation of the European Parliament and of the Council on the Registration, Evaluation,

Authorization and Restriction of Chemicals, 1907/2006/EC, December 2006. (REACH

Regulation)

3.3 Directive of the European Parliament and of the Council on Packaging and Packaging waste,

94/62/EC, December 1994.(including the order of extending)

3.4 Council Directive 2006/66/EC on Batteries and Accumulators and Waste Batteries and

Accumulators and Repealing Directive 91/157/EEC, September 2006.

3.5 Directive of the European Parliament and of the Council on the Restriction of the Use of

Certain Hazardous Substances in Electrical and Electronic Equipment, 2002/95/EC and

2011/65/EU. (RoHS Directive) (including the order of extending)

3.6 Customer’s Green Product Requirement.

4 TERMINOLOGY AND ABBREVIATIONS

4.1 Environment-related substances: Substances that have significant impact on environment and

human body and therefore are controlled by Primax.

4.2 Management Category: to manage the above-mentioned substances, the following three levels

are used.

4.2.1 Level I Banned Substances: The substance groups of Level I are those subject to currently

enacted legislations that prohibit or restrict their use in products or marketing. For those

substances may possible be used in Primax product, it must be banned immediately.

4.2.2 Level II Restricted Substances: Substances and purposes classified at this level are those

for which periods for phase-out are individually set, or for which Primax’s clients ban the

use of these substances, which makes Primax an advocate prohibiting the use of these

substances.

4.2.3 Level III Managed Substances: No periods or targets for reduction are currently set for the

substances and purposes classified at this level. However, the contents of the substances in

parts and materials ought to be reduced. Or for survey purposes only.

4.2.4 The following table lists usage status of substances:

Category Subject Allowed to be contained in

parts

Level I Banned Substances

Banned by regulations No, report to Primax

Version: 12




Level II Restricted Substances

Substances that Primax advocates restricting the use

No, report to Primax

Level III Managed

Substances

Substances that are to be prohibited or used in the future or for survey purposes only

Yes, report to Primax

4.3 Contained: a situation in which a substance is added to, fills up, mingles with, or adheres to the

parts or devices employed in products, or the materials used for the parts or devices, regardless

if the situation is intentionally created or not.（When a substance is unintentionally contained in,

or added to a product in processing process.）

4.4 Impurity: a situation in which natural impurities are part of a natural material but cannot be

removed in the refining process, or impurities are generated in a synthesis process and cannot

be removed.

4.5 Homogenous Material: a homogenous material is a unit that cannot be mechanically disjointed

into different materials and that has uniform composition throughout and include alloys,

plastics, glass, ceramics, coating…(electronic component is not homogenous material.)

4.6 ppm threshold: Environment-related substances that are banned or restricted cannot be used in

materials and parts and be provided to Primax. The ppm threshold refers to the maximum

concentration of impurities in homogenous materials, but exceptions are not included. ppm is

parts per million, unit of measurement for weight percentage. 1 ppm = 1 mg/kg = 0.0001 % by

weight.

4.7 Highly hazardous material: materials that are controlled under EU RoHS are defined as highly

hazardous materials. Suppliers are required to provide a testing report (from ITS, SGS, TUV…)

4.8 Halogen-Free requirement：Total bromine or total chlorine concentration of each homogenous

material in the part or product must comply with Br < 900 ppm and Cl < 900 ppm and Br + Cl <

1500 ppm

4.9 Phthalates requirement：Total phthalates and each phthalate concentration of each homogenous

material in the part or product must be less than 1000 ppm.

4.10 Regarding the substances or their purposes whose use is banned by regional or country laws

and ordinances or banned by Primax customer, if the substances or their purposes are not

clearly regulated in this specification, Primax and its supplier must meet the individual

requirement.

4.11 GP Portal：http://gp.primax.com.tw/gpms_primax/

Version: 12




5 Requirement

5.1 Any materials, parts, assemblies, accessories, auxiliary materials and packaging materials

provided to Primax must not contain environment-related substances defined by the Primax

Green Products Chemical Substances Specification (except for substances that are used for

survey). Natural impurities are acceptable but they must be in line with the related regulations.

5.2 When part approved, Primax’s suppliers must send parts/materials to an authorized laboratory

(see Appendix 3) and follow up disassembling rule 6.2.1 to test and complete the “GP Portal”.

(Test report deadline is one year). Test report requirements follow up item 8.

5.3 If parts/materials provided or added to a product in processing process by Primax suppliers

contained environment-related substances listed in Appendix 1, suppliers must report and

complete the “GP Portal” by homogenous materials. In order to comply with EU related

environmental rules (ex. REACH directive…..), Primax’s suppliers must survey all substances

(100% composition) which contained in parts and fill out the “GP Portal”. Reference example:

capacitor (see the following picture) is disassembled at least 7 homogenous materials and fill

out the “GP Portal”.

Terminal Plating

5.4 When fill out the “GP Portal”, supplier must follow up homogenous material principle to

declare coating material which is used on pin of electronic component(such as

Sn-3.0Ag-0.5Cu，matte Sn….) or surface treatment of metal alloy.(such as Ni，Cr3+， Cr6+…)

5.5 Primax will use XRF to carry out incoming inspection for Br and Cr (Cr3+ + Cr6+) contained in

homogenous material of a product. Primax’s suppliers must fill Br, Cr3+ and Cr6+ content

clearly in the “GP Portal”.

5.6 If suppliers don’t follow 5.3 to fill out the “GP Portal”, suppliers must send the samples to test

by Primax approved laboratory. Furthermore, suppliers must provide MSDS/materials content

list of parts and identify what kinds of environment-related substances.

Version: 12




5.7 Halogen threshold of Appendix 1 is applicable to Halogen-Free part.

5.8 Halogen-Free part must meet requirements of Safety, EMC, Reliability, electrical, mechanical

and related criteria.

5.9 Lithium battery must provide MSDS and test report of UN manual of tests and criteria, part III,

subsection 38.3. Non-lithium battery must provide MSDS.

5.10 If parts/materials provided or added to a product in processing process by Primax suppliers

contained conflict minerals, such as tin, tantalum, gold, tungsten or their derivatives. Suppliers

must upload the “Declaration of DRC Conflict-free” and complete the smelter information in

GP Portal.

6 Specifications

6.1 Environment-related substances that are controlled by Primax, for detailed specifications, see

Appendix 1.

6.2 Highly hazardous banned substances:

According to EU RoHS, six chemical substances: lead, cadmium, mercury, hexavalent

Chromium, PBB, and PBDE are considered as highly hazardous banned substances by Primax.

Suppliers must report to Primax if they used the environment-related substances in their

parts/materials and provide testing report if they used highly hazardous banned substances as

well.

6.2.1 The same type of parts may contain several kinds of materials. Therefore, when parts are

testing, they must be disassembled and testing separately. Disassembling rule is suggested

as follows:

a. Outer or exposed parts of a product should be disassembled as separate materials.

E.g.: If ink is used on an outer part, the ink and the outer part should be testing separately.

b. Small-scale parts smaller than 4 cubic millimeter (mm3) need not to be disassembled. The

part is more than 4 mm3 must follow up next 3 steps:

1.The parts with pin need to be disassembled pin and body. (such as: DIP, QFP…)

2.The parts without pin need to be disassembled electrode and body. (such as:

Resistance…)

3.BGA series need to be disassembled solder ball and body.

c. A part with different materials should be disassembled as separate materials.

Version: 12




E.g.: Connectors should be disassembled as housing (plastic) and contact (metal) and be

testing separately.

d. A part with different colors materials (such as ink, plastic and cables) should be testing

separately.

E.g.: If a part has three colors for the same kind of wire: red, blue, and white. Wires of

different colors should be testing separately.

e. Parts made from different formulas or made by different vendors should be testing

separately.

E.g.: Different ABS materials should be testing separately.

f. Notice that materials added in manufacturing process, such as lubricants, must be testing.

6.2.2 Lead:

6.2.2.1 Applicable to all items apart from the exceptions listed in 6.2.2.4

6.2.2.2 Specifications: ･Plastic, rubber, paint, ink, printing, resin and packaging materials: lead concentration < 90 ppm ･Metal: lead concentration < 1000 ppm (*for lead concentration of steel, aluminum, copper, refer to 6.2.2.4 Exceptions) ･Glass materials, ceramic parts: lead concentration < 1000 ppm, but exceptions defined in RoHS are acceptable ･Electronic parts: lead concentration< 1000 ppm ･Solder: lead concentration < 1000 ppm ･Others: lead concentration < 1000 ppm ･Cable: cable wrappings, cable jacket, etc.: lead concentration < 90ppm; the metal part of a cable: lead concentration < 1000 ppm.

6.2.2.3 Testing Method: IEC 62321

6.2.2.4 Exceptions: · Alloys: a. steel: lead concentration < 3500 ppm b. aluminum alloy: lead concentration < 4000 ppm c. copper alloy: lead concentration < 40000 ppm · Lead contained in a high-melting point solder (lead based alloys containing 85% by weight or more lead) · Lead contained in solder used for a server or a storage device. · Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors. (e.g. piezoelectric devices, or in a glass or ceramic matrix compound) The above glass materials include adhesives, resistor elements, glass frit, conductive pastes(silver or cooper ones), and sealing materials. · Lead in glass of cathode-ray tubes.

Version: 12




· Lead in glass of fluorescent tubes not exceeding 0.2 % by weight. · Optical glass, filter glass.

· Solder to complete a viable electrical connection between semiconductor die and carrier within integrated circuit Flip Chip packages.

6.2.3 Cadmium:


6.2.3.2 Specifications:

･Plastic, rubber, paint, ink, printing, resin, solder, resistor element(glass frit) and

packaging materials: cadmium concentration < 5 ppm

･Metal coating: cadmium and cadmium compounds are banned.

･Others: cadmium concentration < 50 ppm

6.2.3.3 Testing Method: IEC 62321/EN 1122 (only for plastics)

6.2.3.4 Exceptions:

· The plating of electrical contacts is required highly reliability, which has no

substitute materials.

· Filter glass

6.2.4 Mercury:



‧All applications: mercury concentration < 5 ppm


6.2.4.4 Exceptions:

‧Mercury in cold cathode fluorescent lamps and external electrode fluorescent lamps

(CCFL and EEFL) for special purposes (per lamp):

a. Short length (≦500 mm): mercury concentration < 3.5 mg

b. Medium length ( >500 mm and ≦1500 mm): mercury concentration < 5 mg

c. Long length ( >1500 mm): mercury concentration < 13 mg

‧Mercury in other low pressure discharge lamps (per lamp) < 15 mg

6.2.5 Hexavalent Chromium:

6.2.5.1 Applicable to all items, no exception.


･Metal coating, printing, paint and ink: hexavalent chromium and hexavalent

chromium compounds are banned.

Version: 12




･Plastic, rubber and packaging materials: hexavalent chromium concentration < 100

ppm

･Others: hexavalent chromium concentration < 1000 ppm

6.2.5.3 Testing Method: Metal must use IEC 62321 Spot-test or Boiling-water-extraction

method /ISO 3613；Others (including electronic parts) use IEC 62321/USEPA 3060A

6.2.6 PBB/ PBDE

6.2.6.1 Applicable to all items, no exception


･All applications: PBB/PBDE concentration < 5 ppm


6.2.7 Heavy metals contained in packing materials

6.2.7.1 The articles used for cartons to package products, cartons for returnable boxes, and

packaging for part transportation (handles, wooden frames, foil and trays, reels,

letters, sticks, glues, magazines, plastic bags, cushions, fixers, sheets, ropes, cartons,

paint, ink, tape, straps, film, and labels, etc.)

6.2.7.2 Specifications: the allowable concentration of four heavy metals (mercury,

cadmium, hexavalent chromium, and lead) should not only be less than 100 ppm but

also comply with threshold requirements in this specification. (ex. the allowable

concentration of cadmium in a plastic (rubber) part should be less than 5 ppm.)

6.2.7.3 Testing Method: Refer to the testing methods of lead, cadmium, mercury, and

hexavalent chromium.

6.2.8 Battery Requirement

6.2.8.1 Applicable to all battery types (ex: battery, battery pack, button cell), including

accumulators.


･Battery and battery pack: Cadmium concentration < 5 ppm

Lead concentration < 40 ppm

Mercury concentration < 1 ppm

･Button cell: Mercury concentration < 20000 ppm

6.2.8.3 Testing Method: Refer to the testing methods of lead, cadmium, mercury

Version: 12




6.3 Halogen-Free requirement:

When new part approved, Primax’s suppliers must fill all substances (100% composition) in the

“GP Portal” and provide RoHS and Halogen test report.

6.3.1 disassembling rule: refer to 6.2.1

6.3.2 Applicable to all items, no exception

PS: Metal (except soldering wire and soldering paste), Alloy, Electronic component

(except resin material) don’t test for Halogen.

6.3.3 Specifications: Br < 900 ppm and Cl < 900 ppm and Br + Cl < 1500 ppm (each homogenous

material)

6.3.4 Testing Method: EN 14582

6.4 HBCDD、Phthalates requirement:

When new part approved, Primax’s suppliers must fill all substances (100% composition) in the

“GP Portal” and provide RoHS, HBCDD and Phthalates test report.

6.4.1 disassembling rule: refer to 6.2.1

6.4.2 Applicable to all items, no exception

PS: Metal, Alloy, Electronic component (except resin material) don’t test for HBCDD and

Phthalates.

6.4.3 Specifications: HBCDD < 1000 ppm. Total phthalates and each phthalate concentration of

each homogenous material in the part or product must be less than 1000 ppm.

6.4.4 Testing Method: HBCDD US EPA 3540C；Phthalates EN 14372

6.5 REACH SVHC

When new part approved, Primax’s suppliers must confirm and provide content of SVHC

(Substances of Very High Concern) for EU REACH directive. (Boldface substances in

Appendix 1 are both REACH SVHC and Primax’s Environment-related substances)

The last candidate list:http://echa.europa.eu/chem_data/authorisation_process/candidate_list_table_en.asp

7 HEAT RESISTANCE REQUIREMENTS FOR LEAD-FREE COMPONENT

The lead-free part/component used in lead-free process must comply with “Primax Heat Resistance

Version: 12




Requirements for Lead-Free Component” (see Appendix 2). If it could not meet the “Heat

Resistance Requirements”, the supplier must provide max. soldering condition for Primax

evaluation.

7.1 For SMT part/component-- must meet the requirement among item 1. SMT , 2. DIP and 3.

Hand soldering condition. (see appendix 2)

7.2 For DIP part/component-- must meet the requirement of item 2. DIP and 3. Hand soldering

condition. (see appendix 2)

8 TEST REPORT REQUIREMENT

The supplier must comply with PN GP level of Primax to provide test reports.

PN GP Level RoHS Halogen（Br,Cl） HBCDD + Phthalates

G

H

K

L

Version: 12


Green Product Chemical Substance Specification PAGE： 14 OF 31


Appendix 1: Environment-related substances specification

Category Substance CAS# Threshold

Antimony 7440-36-0

Antimony trichloride 10025-91-9

Level Ⅲ Managed Substances. For survey purpose

Antimony trioxide 1309-64-4

a. LevelⅡRestricted Substances. Threshold < 1000 ppm (Except for ceramics and glass) b. Ceramics and glass: Level Ⅲ Managed Substances. For survey purpose (Example: electronic component)

Antimony pentoxide 1314-60-9

Sodium antimonate 15432-85-6

Antimony and Antimony Compounds

Other antimony compounds —


Arsenic 7440-38-2

Gallium arsenide 1303-00-0

Arsenic pentoxide 1303-28-2

Arsenic trioxide 1327-53-3

Potassium arsenate 7784-41-0

Lead arsenate 3687-31-8

Calcium arsenite 27152-57-4

Arsenic Acid, Calcium Salt 7778-44-1

Arsenic Acid, Copper Salt 10103-61-4

Arsenic Acid Disodium Salt, Heptahydrate 10048-95-0

Arsenic Trihydride 7784-42-1

Arsenic Trichloride 7784-34-1

Arsenic Acid, Diammonium Salt 7784-44-3

Arsenic Acid, Lead Salt 7784-40-9

Arsenic Acid, Magnesium Salt 10103-50-1

Arsenious Acid, Potassium Salt 10124-50-2

Arsenious Acid, Copper (II) Salt 10290-12-7

Diarsenic trioxide 1327-53-3

Arsenic and Arsenic Compounds

Other Arsenic compounds —

a. Level Ⅱ Restricted Substances. Threshold < 50 ppm (Except for semiconductors and metal alloys) b. Level Ⅱ Restricted Substances. Restricted in metal alloys. Threshold < 1000 ppm c. Semiconductors: Level Ⅲ Managed Substances. For survey purpose

Beryllium 7440-41-7

Beryllium oxide 1304-56-9

Beryllium-Aluminum alloy 12770-50-2

Beryllium copper —

Beryllium hydroxide 13327-32-7

Beryllium phosphate 13598-15-7

Beryllium and Beryllium Compounds

Beryllium sulfate tetrahydrate 7787-56-6

a. Level Ⅱ Restricted Substances. Threshold < 1000 ppm (Except for electronic components) b. Electronic components: Level Ⅲ

Managed Substances. For survey purpose

Version: 12





Beryl ore 1302-52-9

Beryllium Carbonate 66104-24-3

Beryllium Nitrate 13597-99-4

Beryllium Chloride 7787-47-5

Beryllium Fluoride 7787-49-7

Beryllium Sulfate 13510-49-1

Beryllium Copper —

Other Beryllium compounds —

Bismuth 7440-69-9

Bismuth trioxide 1304-76-3

Bismuth nitrate 10361-44-1

Bismuth and Bismuth Compounds

Other bismuth compounds —


Cadmium 7440-43-9

Cadmium oxide 1306-19-0

Cadmium sulfide 1306-23-6

Cadmium chloride 10108-64-2

Cadmium sulfate 10124-36-4

Cadmium Carbonate 513-78-0

Cadmium fluoroborate 14486-19-2

Cadmium nitrate 10325-94-7

Cadmium nitrate tetrahydrate 10022-68-1

Cadmium stearate 2223-93-0

Cadmium chromate 14312-00-6

Cadmium and Cadmium Compounds

Other cadmium compounds —

a. Level I Banned Substances. Banned in plastic, rubber, dyes, pigments, paints, polymer colorants , stabilizers, solder, resistor element(glass frit)and packaging materials. Threshold < 5 ppm; Metal coating is not intentionally added. b. Other application. Threshold < 50 ppm

Chromium (Ⅲ) oxide 1308-38-9

Neochromium 64093-79-4 Chromium and its Compounds(excluding hexavalent chromium) Other chromium compounds —


Sodium dichromate 10588-01-9

Chromium(VI) oxide 1333-82-0

Calcium chromate 13765-19-0

Lead(II) chromate 7758-97-6

Potassium dichromate 7778-50-9

Potassium chromate 7789-00-6

Chromium (Cr6+) 18540-29-9

Chromic acetate 1066-30-4

Chromium (VI) and its Compounds2 18540-29-9

Lithium chromate 14307-35-8

Sodium chromate 7775-11-3

Hexavalent Chromium Compounds

Potassium chlorochromate 16037-50-6

a. Level I Banned Substances. Plastic, rubber and packaging materials. Threshold < 100 ppm; Metal coating, printing, ink and paint are not intentionally added. b. Other application. Threshold < 1000 ppm

Version: 12





Ammonium chromate 7788-98-9

Copper chromate 13548-42-0

Magnesium chromate 13423-61-5

Strontium chromate 7789-06-2

Barium chromate 10294-40-3

Lead chromate; chrome yellow 1344-37-2

Zinc chromate 12018-19-8



Ammonium dichromate; ammonium bichromate 7789-09-5

Calcium dichromate; calcium bichromate 14307-33-6

Zinc dichromate; zinc bichromate —

Lead Chromate Pigments 1334-37-2

Lead Chromate Pigments 12656-85-8

Sodium dichromate 7789-12-0

Other hexavalent chromium compounds —

Lead 7439-92-1

Lead(II) Carbonate 598-63-0

Lead(IV) oxide 1309-60-0

Lead(II,IV) oxide 1314-41-6

Lead(II) sulfide 1314-87-0

Lead(II) oxide 1317-36-8

Lead(II) Carbonate basic 1319-46-6

Lead hydroxid Carbonate 1344-36-1

Lead(II) sulfate 7446-14-2

Lead(II) phosphate 7446-27-7

Lead(II) chromate 7758-97-6

Lead(II) titanate 12060-00-3

Lead sulfate,sulphuric Acid, lead salt 15739-80-7

Lead sulphate,tribasic 12202-17-4

Lead stearate 1072-35-1

Lead stearate,dibasic 56189-09-4

Lead selenide 12069-00-0

Lead / Tin alloy 39412-44-7

Dilead trioxide —

Lead azide 13424-46-9

Lead (II) fluoride 7783-46-2

Lead and Lead Compounds

Lead (II) chloride 7758-95-4

a. Level I Banned Substances. Banned in plastic, rubber, dyes, pigments, paints, polymer colorants , stabilizers, and packaging materials. Threshold < 90 ppm b. Other application, e.g. electronic parts. Threshold < 1000 ppm c. Solder: Threshold < 1000 ppm d. Steel: Threshold < 3500 ppm e. aluminum alloy: Threshold < 4000 ppm f. copper alloy: Threshold < 40000 ppm

Version: 12





Lead (IV) chloride 13463-30-4

Lead (II) iodide 10101-63-0

Lead (II) cyanide 592-05-2

Lead fluoroborate 13814-96-5

Lead fluosilicate 25808-74-6

Lead nitrate 10099-74-8

Lead perchlorate 13637-76-8

Lead thiocyanate 592-87-0

Lead (II) acetate,trihydrate 6080-56-4

Lead (II) acetate 301-04-2

Lead (IV) acetate 546-67-8

Lead oleate 1120-46-3

Lead stearate 7428-48-0

Lead (II) metaborate 10214-39-8

Lead metasilicate 11120-22-2

Lead metasilicate 10099-76-0

Lead antimonite 13510-89-9

Lead arsenate (1:1) 7784-40-9

Lead (II) arsenite 10031-13-7

Lead chromate; chrome yellow 1344-37-2

Lead molybdate 10190-55-3

Calcium plumbate 12013-69-3

Tetramethyl lead 75-74-1

Tetraethyl lead 78-00-2

Lead Naphthenate 61790-14-5

Lead Methanesulfonate 17570-76-2

Lead Styphnate 15245-44-0

Other lead compounds —

Mercury 7439-97-6

Mercury(II) chloride 7487-94-7

Mercury(II) oxide 21908-53-2

Mercuric chloride 33631-63-9

Mercuric sulfide 1344-48-5

Mercury alloys; amalgam —

Mercury (I) oxide 15829-53-5

Mercury (I) chloride 10112-91-1

Mercury (II) nitrate 10045-94-0

Mercury (I) sulfate 7783-35-9

Mercury and Mercury Compounds

Mercury (II) fulminate 628-86-4

a. Level I Banned Substances. Threshold < 5 ppm b. Mercury in cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFL and EEFL) for special purposes (per lamp): b-1 Short length (≦500 mm): mercury concentration < 3.5 mg b-2 Medium length ( >500 mm and ≦1500 mm): mercury concentration < 5 mg b-3 Long length ( >1500 mm): mercury concentration < 13 mg

Version: 12





Mercury (II) acetate 1600-27-7

Methylmercury salts 22967-92-6

Ethymercury salts —

Propylmercury salts —

Phenylmercury salts —

Methoxyethylmercury salts —

Dialkylmercury —

Diphenylmercury 587-85-9

Mercuriphenyl Nitrate 55-68-5

Other mercury compounds —

c. Mercury in other low pressure discharge lamps (per lamp) < 15 mg

Nickel(II) oxide 1313-99-1

Nickel(II) Carbonate 3333-67-3

Nickel(II) Sulfate 7786-81-4

Nickel 7440-02-0

Nickel carbonyl 13463-39-3

Nickelhydroxide 11113-74-9

Nickel(II)hydroxide 12054-48-7

Nickeldioxide 12035-36-8

Nickelsubsulphide 12035-72-2

Nickelsulphide 11113-75-0

Nickelsulphide 12137-12-1

Nickel acetate 373-02-4

Nickelocene 1271-28-9

Nickel and Nickel Compounds

Other Nickel compounds —

a. Level Ⅱ Restricted Substances. It is not intentionally added in the surfaces of products that are intended to come into direct and prolonged contact with the skin. b. Other application: Level Ⅲ Managed Substances. For survey purpose

Selenium 7782-49-2

Selenous Acid 7783-00-8

Hydrogen selenide 7783-07-5

Sodium selenide 1313-85-5

Selenium dioxide 7446-08-4

Sodium selenate 10112-94-4

Dimethyl selenide 593-79-3

Selenium oxide 12640-89-0

Selenium and Selenium Compounds

Other selenium compounds —


Magnesium Magnesium 7439-95-4 Level Ⅲ Managed Substances. For survey purpose

Dibutyltin oxide 818-08-6

Dibutyltin dichloride 683-18-1

Dibutyltin dilaurate 77-58-7

Dibutyltin and its compounds (DBT)

Dibutyltin bis(benzyl maleate) 7324-74-5

Level Ⅱ Restricted Substance. Threshold < 1000 ppm

Version: 12





Dibutyltin maleate 78-04-6

Dibutuyltin di(acetate) 1067-33-0

Dioctyltin oxide 870-08-6

Dioctyltin maleate 16091-18-2

Dioctyltin dichloride 3542-36-7

Di(n-octyl)tin bis(isooctylthioglycolate) 26401-97-8

Dioctyltin and its compounds (DOT)

Dioctyltin dilaurates (DOTL) 3648-18-8

Level Ⅱ Restricted Substance. Threshold < 1000 ppm

Tributyl Tin Oxide (TBTO)

Bis(tri-n-butyltin) oxide 56-35-9 Level I Banned Substances. Not intentionally added

Triphenyltin N,N'-dimethyldithiocarbamate 1803-12-9

Triphenyltin fluoride 379-52-2

Triphenyltin acetate 900-95-8

Triphenyltin chloride 639-58-7

Triphenyltin hydroxide 76-87-9

Triphenyltin fatty Acid salts (C=9-11)

47672-31-1 18380-71-7 94850-90-5 18380-72-8

Triphenyltin chloroacetate 7094-94-2

Tributyltin methacrylate 2155-70-6

Bis(tributyltin) fumarate 6454-35-9

24291-45-0

Tributyltin fluoride 1983-10-4 7304-48-5

Bis(tributyltin) 2,3-dibromosuccinate 31732-71-5 56323-17-2

Tributyltin acetate 56-36-0

Tributyltin laurate 3090-36-6

Bis(tributyltin) phthalate 4782-29-0

Copolymer of alkyl acrylate, methyl methacrylate and tributyltin methacrylate(alkyl; C=8)

67772-01-4

Tributyltin sulfamate 6517-25-5

Bis(tributyltin) maleate 14275-57-1 24291-38-3

Tributyltin chloride 1461-22-9 7342-38-3

Mixture of tributyl tin cyclopentanecarboxylate and its alaogs (Tributyl tin naphthenate)

85409-17-2

Mixture of tributyltin 1,2,3,4,4a,4b,5,6,10,10a-decahydro-7- isopropyl-1,4a-dimethyl-1-phenanthlenecarboxylate and its analogs (Tributyltin rosin salt)

26239-64-5

Tributyl tin & compounds 688-73-3

Tributyl tin bromide 1461-23-0

Tributyl Tins & Triphenyl Tins

Triphenyl tin bromide —

Level I Banned Substances. Not intentionally added

Version: 12





Triphenyl tin 668-34-8

Other Tributyl Tins & Triphenyl Tins —

polybrominated biphenyls —

Bromobiphenyl (2-Bromobiphenyl) 2052-07-5

Bromobiphenyl (3-Bromobiphenyl) 2113-57-7

Octabromobiphenyl 61288-13-9

Dibromobiphenyl 92-86-4

Hexabromobiphenyl 59080-40-9

Hexabromo-1,1’- biphenyl 36355-01-8

Heptabromobiphenyl —

Polybrominated Biphenyls 59536-65-1

Tetrabromobiphenyl 40088-45-7

Nonabromobiphenyl —

Decabromobiphenyl 13654-09-06

Pentabromobiphenyl —

Tribromobiphenyl —

Hexabromobiphenyl (Firemaster FF-1) 67774-32-7

4-BROMOBIPHENYL (PBB) 92-66-0

Polybrominated Biphenyls (PBBs)

Other polybrominated biphenyls —

Level I Banned Substances. Threshold < 5 ppm

polybrominated diphenyl ethers —

Decabromodiphenyl ether;decabromodiphenyloxide;DBDPE; DBDPO

1163-19-5

Octabromodiphenyl ether;octabromodiphenyloxide 32536-52-0

Hexabromodiphenyl ether;hexabromodiphenyloxide 36483-60-0

Pentabromodiphenylehter;pentabromodiphenyloxide 32534-81-9

4-Bromodiphenyl Ether (PBDE) 101-55-3

Dibromodiphenyl Ether (PBDE) 2050-47-7

Heptabromobiphenylether 68928-80-3

Nonabromobiphenylether 63936-56-1

Tribromodiphenyl Ether (PBDE) 49690-94-0

Tetrabromodiphenyl Ether (PBDE) 40088-47-9

Polybrominated Diphenyl ethers (PBDEs)；Polybrominated Biphenyl ethers(PBBEs)；Polybrominated Biphenyl Oxides(PBBOs)；Polybrominated Diphenyl Oxides(PBDOs)

Other polybrominated diphenyl ethers —

Level I Banned Substances. Threshold < 5 ppm

Polychlorinated biphenyls (PCBs) 1336-36-3

Polychlorinated terphenyls (PCTs) 61788-33-8

Pentachlorobiphenyl 25429-29-2

Aroclor 12767-79-2

Chlorodiphenyl (Aroclor 1260) 11096-82-5

Kanechlor 500 27323-18-8

Polychlorinated Biphenyls (PCBs) and Polychlorinated terphenyls (PCTs)

Aroclor 1254 11097-69-1


Version: 12





Terphenyls 26140-60-3

Polychlorinated biphenyls (PCBs) 59536-65-1

1,1’-Biphenyl, 2,2’,5-trichloro- (PCB 18) 37680-65-2

1,1’- Biphenyl, 2,2’,5,6’- trichloro- (PCB 53) 41464-41-9

1,1’-Biphenyl, 2,4-trichloro- (PCB 7) 33284-50-3

Aroclor 5460 (PCT) 11126-42-4

Aroclor 5442 (PCT) 12642-23-8

any Mixture containing any of the abovementioned substances in a total of more than 0,005 % by weight(=PCT)

—

Other PCBs and PCTs —

Polychlorinated Naphthalenes (Cl=>3) 70776-03-3

Pentachloronaphthalene 1321-64-8

Trichloronaphthalenes 1321-65-9

Tetrachloronaphthalenes 1335-88-2

Octachloronaphthalenes 2234-13-1

Mirex (Perchlordecone); Dodecachlorooctahydro-1, 3, 4-metheno-2Hcycrobuta(cd) pentalene

2385-85-5

Polychloronapthalenes (PCNs) (Cl=>3)

Other polychlorinated Naphthalenes (Cl=>3) —


Vinyl Chloride Polymer (PVC)

Poly vinyl chloride（PVC） 9002-86-2

a. Level Ⅱ Restricted Substance. Not intentionally added (except for cable and connectors) b. Level Ⅲ Managed Substances. Cable and connectors for survey purpose

Brominated flame retardant which comes under notation of ISO 1043-4 code number FR(14) [ Aliphatic/alicyclic brominated compounds ]

—

Brominated flame retardant which comes under notation of ISO 1043-4 code number FR(15) [ Aliphatic/alicyclic brominated compounds in combination with antimony compounds ]

—

Brominated flame retardant which comes under notation of ISO 1043-4 code number FR(16) [ Aromatic brominated compounds （excluding brominated diphenyl ether and biphenyls） ]

—

Brominated Flame Retardants

Brominated flame retardant which comes under notation of ISO 1043-4 code number FR(17) [ Aromatic brominated compounds （excluding brominated diphenyl ether and biphenyls） in combination with antimony compounds ]

—

a. Level Ⅱ Restricted Substance. Threshold < 900 ppm (except for cable/connectors, electronic component, fans, power supplier,

Version: 12





Brominated flame retardant which comes under notation of ISO 1043-4 code number FR(22) [ Aliphatic/alicyclic chlorinated and brominated compounds ]

—

Brominated flame retardant which comes under notation of ISO 1043-4 code number FR(42) [ Brominated organic phosphorus compounds ]

—

Poly(2,6-dibromo-phenylene oxide) 69882-11-7

Tetra-decabromo-diphenoxy-benzene 58965-66-5 1,2-Bis(2,4,6-tribromo-phenoxy) ethane 37853-59-1 3,5,3’,5’-Tetrabromo-bisphenol A (TBBA) 79-94-7 TBBA, unspecified 30496-13-0 TBBA-epichlorhydrin oligomer 40039-93-8 TBBA-TBBA-diglycidyl-ether oligomer 70682-74-5 TBBA Carbonate oligomer 28906-13-0 TBBA Carbonate oligomer, phenoxy end capped 94334-64-2 TBBA Carbonate oligomer, 2,4,6-tribromo-phenol terminated

71342-77-3

TBBA-bisphenol A-phosgene polymer 32844-27-2 Brominated epoxy resin end-capped with tribromophenol

139638-58-7

Brominated epoxy resin end-capped with tribromophenol

135229-48-0

TBBA-(2,3-dibromo-propyl-ether) 21850-44-2 TBBA bis-(2-hydroxy-ethyl-ether) 4162-45-2 TBBA-bis-(allyl-ether) 25327-89-3 TBBA-dimethyl-ether 37853-61-5 Tetrabromo-bisphenol S 39635-79-5 TBBS-bis-(2,3-dibromo-propyl-ether) 42757-55-1 2,4-Dibromo-phenol 615-58-7 2,4,6-tribromo-phenol 118-79-6 Pentabromo-phenol 608-71-9 2,4,6-Tribromo-phenyl-alltl-ether 3278-89-5 Tribromo-phenyl-allyl-ether, unspecified 26762-91-4 Hexabromo-cyclo-dodecane (HBCD), unspecified 3194-55-6 Tetrabromo-chyclo-octane 31454-48-5 1,2-Dibromo-4-(1,2 dibromo-methyl)-cyclo-hexane 3322-93-8 TBPA Na salt 25357-79-3 Tetrabromo phthalic anhydride 632-79-1 Bis(methyl)tetrabromo-phtalate 55481-60-2 Bis(2-ethlhexyl)tetrabromo-phtalate 26040-51-7 2-Hydroxy-propyl-2-(2-hydroxy-ethoxy)-ethyl-TBP 20566-35-2 TBPA, glycol-and propylene-oxide esters 75790-69-1 N,N’-Ethylene –bis-(tetrabromo-phthalimide) 32588-76-4 Ethylene-bis(5,6-dibromo-norbornane-2,3-dicarboximide)

52907-07-0

2,3-Dibromo-2-butene-1,4-diol 3234-02-4 Dibromo-neopentyl-glycol 3296-90-0 Dibromo-propanol 96-13-9 Tribromo-neopentyl-alcohol 36483-57-5 Poly tribromo-styrene 57137-10-7 Tribromo-styrene 61368-34-1 Dibromo-styrene grafted PP 171091-06-8

PCB, printer fuser assemblies) b. Level Ⅲ Managed Substances. cable/connectors, electronic component, fans, power supplier, PCB, printer fuser assemblies for survey purpose a. Level Ⅱ Restricted Substance. Threshold <900 ppm (except for cable/connectors, electronic component, fans, power supplier, PCB, printer fuser assemblies) b. Level Ⅲ Managed Substances. cable/connectors, electronic component, fans, power supplier, PCB, printer fuser assemblies for survey purpose

Version: 12





Poly-dibromo-styrene 31780-26-4 Bromo-/Chloro-paraffins 68955-41-9 Bromo-/Chloro-alpha-olefin 82600-56-4 Vinylbromide 593-60-2 Tris-(2,3-dibromo-propyl)-isocyanurate 52434-90-9 Tris(2,4-Dibromo-phenyl) phosphate 49690-63-3 Tris(tribromo-neopentyl) phosphate 19186-97-1 Chlorinated and brominated phosphate esther 125997-20-8 Pentabromo-toluene 87-83-2 Pentabromo-benzyl bromide 38521-51-6 1,3-Butadiene homopolymer,brominated 68441-46-3 Pentabromo-benzyl-acrylate, monomer 59447-55-1 Pentabromo-benzyl-acrylate, polymer 59447-57-3

Decabromo-diphenyl-ethane 61262-53-1 84852-53-9

Tribromo-bisphenyl-maleinimide 59789-51-4 Brominated trimethylphenyl-lindane 59789-51-4

Chloroendic Antydride 115-27-5

Chloroendric Acid 115-28-6

Tetrachlorophthalic Anhydride (TCPA) 117-08-8

Hexabromobenzene 87-82-1

1,1,2,2-Tetrabromoethane 79-27-6

Other Brominated Flame Retardants —

Chlorinated paraffine (C10-13) 85535-84-8 Chloroparaffins, short-chained (10 – 13 Carbon Chain)

8029-39-8

Chloroparaffins, short-chained (10 – 13 Carbon Chain)

63449-39-8

Chlorinated polyethylene 64754-90-1 Alkanes, C10 - C13, chloro 85535-84-8 Chlorinated Paraffins (C12, 60% Chlorine) 108171-26-2 Chlorinated Paraffins (C23, 43% Chlorine) 108171-27-3 Alkanes, C12-13, Chloro 71011-12-6 Alkanes, C12-14, Chloro 85536-22-7 Alkanes, C10-14, Chloro 85681-73-8 Alkanes, C12-21, Chloro 84082-38-2 Alkanes, Chloro 61788-76-9 Alkanes, C6-18, Chloro 68920-70-7 Alkanes, C10-32, Chloro 84776-06-7 Alkanes, C10-26, Chloro 97659-46-6 Paraffins (Petroleum, normal C > 10, Chloro) 97553-43-0 Paraffins oils and hydrocarbon oils, chloro 85422-92-0

Chlorinated Paraffins(Short, normal, long chain)

Other Short Chain Chlorinated Paraffins —


Actinolite 77536-66-4

Amosite 12172-73-5

Anthophyllite 77536-67-5

Chrysotile 12001-29-5

Asbestos

Crocidolite 12001-28-4


Version: 12





Tremolite 77536-68-6

Asbestos and Asbestos Materials 132207-33-1

Asbestos 1332-21-4

Asbestos 132207-32-0

Anthophyllite 17068-78-9

Tremolite 14567-73-8

Actinolite 13768-00-8

Other asbestos —

4-Aminoazobenzene 60-09-3

o -anisidine 90-04-0

2-naphthylamine 91-59-8

3,3'-dichlorobenzidine 91-94-1

4-aminodiphenyl and its salts 92-67-1

Benzidine 92-87-5

o -toluidine 95-53-4

4-chloro-o -toluidine 95-69-2

2,4-toluenediamine 95-80-7

o -aminoazotoluene 97-56-3

5-nitro-o -toluidine 99-55-8

4,4'-methylene-bis-(2-chloroanilene) 101-14-4

4,4'-methylenedianiline 101-77-9

4,4'-oxydeaniline 101-80-4

p-chloroaniline 106-47-8

3,3'-dimethoxybenzidine 119-90-4

3,3'-dimethylbenzidine 119-93-7

p-cresidine 120-71-8

2,4,5-trimethylaniline 137-17-7

4,4'-thiodianiline 139-65-1

4-methoxy-m-phenylenediamine 615-05-4

3,3'-dimethyl-4,4'-diaminodiphenylmethane 838-88-0

Mixture (EINECS number: 611-070-00-2 ; EC-number: 405-665-4 ; No CAS number) of the following compounds:

EINECSnumber:611-070-00-2;

EC-number:405-665-4

Azo Colorants

Compound 1: C39H23ClCrN7O12S.2Na :: disodium (6-(4- anisidino)-3-sulfonato-2-(3,5- dinitro-2-oxidophenylazo)-1- naphtholato)(1-(5-chloro-2- oxidophenylazo)-2- naphtholato)chromate(1-)

118685-33-9


Version: 12





Compound 2: C46H30CrN10O20S2.3Na :: trisodium bis(6-(4-anisidino)-3- sulfonato-2-(3,5-dinitro-2- oxidophenylazo)-1- naphtholato)chromate(1-)”

—

Chlorofluorocarbons, CFCs (Annex A GroupⅠ

substances in the Montreal Protocol) —

Halons (Annex A GroupⅡsubstances in the Montreal Protocol)

—

Chlorofluorocarbons, CFCs (Annex B GroupⅠ

substances in the Montreal Protocol) —

Carbon tetrachloride (Annex B GroupⅡsubstance in the Montreal Protocol)

56-23-5

1,1,1-trichloroethane (Annex B GroupⅢsubstance in the Montreal Protocol)

71-55-6

Bromochloromethane (Annex C GroupⅢsubstance in the Montreal Protocol)

—

Methyl bromide; Bromomethane (Annex E substance in the Montreal Protocol)

74-83-9

Hydrobromofluorocarbons, HBFCs (Annex C GroupⅡsubstances in the Montreal Protocol) —

Ozone depleting substances (Isomers included)

Hydrochlorofluorocarbons, HCFCs (Annex C GroupⅠsubstances in the Montreal Protocol) —


Dibutylphthalate (DBP) 84-74-2

Dioctyl phthalate (DOP) Di(2-ethylhexyl)phthalate (DEHP)

117-81-7

Butyl benzyl phthalate (BBP) 85-68-7 1,2-Benzenedicarboxylic Acid diisodecyl ester Diisodecyl phthalate (DIDP)

26761-40-0 68515-49-1

Diisononyl phthalate (DINP) 28553-12-0 68515-48-0

Di-n-octyl Phthalate (DNOP) 117-84-0

Diisobutyl phthalate (DIBP) 84-69-5

Level I Banned Substances. Threshold <1000 ppm.

Dimethyl Phthalate (DMP) 131-11-3

Diethyl Phthalate (DEP) 84-66-2

Bis(2-methoxyethyl) phthalate 117-82-8

Di-n-hexyl phthalate (DNHP) 84-75-3

Di-n-pentyl phthalate (DnPP) 131-18-0

Phthalates

Other phthalate —


Hexabromocyclododecane (HBCDD)

Hexabromocyclododecane (HBCDD) 25637-99-4 Level I Banned Substances. Threshold < 1000 ppm

Uranium —

Plutonium —

Radon —

Americium —

Radioactive substances

Thorium —


Version: 12





Cesium 7440-46-2

Strontium 7440-24-6

Other radioactive substances —

Benzene Benzene 71-43-2 Level Ⅱ Restricted Substance. Threshold < 1000 ppm

Toluene Di-Isocyanate (TDI) 584-84-9

Methylene Bisphenyl Isocyanate (MDI) 101-68-8

Hexamethylene Di-Isocyanate (HDI) 822-06-0

Polymethylene Polyphenyl Isocyanate (PAPI) 9016-87-0

Isophorone Di-Isocyanate (IPDI) 4098-71-9

1,5 -Naphtalene Di-Isocyanate (NDI) 3173-72-6

Methylene Bis-(4-CyclohexylIsocyanate) 5124-30-1

Toluene di-isocyanate 26471-65-2

Isocyanates

Polyisocyanates (Isocyanate Prepolymers) —


1,1,2,2-Tetrachloroethane 79-34-5

1,1,1,2- Tetrachloroethane 630-20-6

Pentachloroethane 76-01-7

Trichloromethane 67-66-3

1,1,2- Trichloroethane 79-00-5

1,1- Dichloroethylene 75-35-4

Aliphatic CHCs

Tetrachloromethane 56-23-5


1,2- Dichloroethane 107-06-2

Cis-1,2-dichloroethylene 156-59-2

1,3-dichloropropene 546-75-6

Dichloromethane 75-09-2

Tetrachloroethylene 127-18-4

Soil Contaminated Substances/Chlorinated Organic Solvents

Trichloroethylene 79-01-6


Aldrin Aldrin 309-00-2 Level I Banned Substances. Not intentionally added

Endrin Endrin 72-20-8 Level I Banned Substances. Not intentionally added

Chlordane Chlordane

57-74-9 3734-48-3 5103-74-2 5103-71-9 76-44-8

27304-13-8 39765-80-5 5103-73-1


Dieldrin Dieldrin 60-57-1 Level I Banned Substances. Not intentionally added

Hexachlorobenzene Hexachlorobenzene 118-74-1 Level I Banned Substances. Not intentionally added

Version: 12





DDT DDT 789-02-6 Level I Banned Substances. Not intentionally added

Bis(chloromethyl) ether

Bis (chloromethyl) ether 542-88-1 Level I Banned Substances. Not intentionally added

4-Nitrobiphenyl and its chlorides

4-Nitrobiphenyl 92-93-3 Level I Banned Substances. Not intentionally added

Nonylphenol 104-40-5

n- Nonylphenol (Mixed isomers) 25154-52-3

Nonylphenol, industrial 84852-15-3

Phenol, nonyl-,phosphitea 26523-78-4

2-(p- Nonylphenoxy) ethanol 104-35-8

2-(2-( p- Nonylphenoxy)ethoxy) ethanol 20427-84-3

p- Nonylphenol polyethylene glycol ether 26027-38-3

Nonylphenol hepta(oxyethylene)ethanol 27177-05-5

Nonylphenol nona(oxyethylene)ethanol 27177-08-8

Ethoxynonyl-benzene 28679-13-2

Nonylphenoxy ethanol 27986-36-3

Oxirane, methyl-, polymer with oxirane, mono(nonylphenyl) ether

37251-69-7

2-(2-(2-(2-(p- Nonylphenoxy)ethoxy) ethoxy)ethoxy) ethanol

7311-27-5

Nonylphenol polyethylene glycol ether 9016-45-9

Ethanol, 2-[2-( nonylphenoxy)ethoxy]- 27176-93-8

Nonylphenol ethoxylate 37340-60-6

Poly(oxy-1,2-ethanediyl), alpha-(2- nonylphenyl)-omega-hydroxy-

51938-25-1

Nonylphenol ethoxylate 68412-53-3

Poly(oxy-1,2-ethanediyl), alpha(isononylphenyl) omega-hydroxy

37205-87-1

Poly(oxy-1,2-ethanediyl), alpha(nonylphenyl) omega-hydroxy, branched

68412-54-4

Nonylphenols (NP) & Nonylphenol Ethoxylates (NPE)

Poly(oxy-1,2-ethanediyl), alpha(4- nonylphenyl) omega-hydroxy, branched

127087-87-01


Formaldehyde Formaldehyde 50-00-0

Level I Banned Substances. 1. Threshold < 0.1 ml/m3 (ppm) (Except for textiles, fabrics) 2. Restricted in textiles and fabrics. Threshold < 75 ppm

Monomethyl-tetrachloro-diphenyl methane 76253-60-6

Monomethyl-dichloro-diphenyl methane 81161-70-8

Monomethyl-dibromo-diphenyl methane (DBBT) 99688-47-8

Halogenated Diphenyl Methanes

di-μ-oxo-di-nbutyltin hydroxyborane (DBB) 75113-37-0


Pentachlorophenol Pentachlorophenol 87-86-5 Level I Banned Substances. Not

Version: 12





(PCP) Polychlorinated phenols and derivatives (PCPs) — intentionally added

Red phosphorous Red phosphorous 7723-14-0 Level I Banned Substances. Not intentionally added

N,N’-ditolyl-p-phenylenediamine

N,N’-ditolyl-p-phenylenediamine 27417-40-9 Level I Banned Substances. Not intentionally added

2,4,6-tri-tert-butylphenol (TTBP)

2,4,6-tri-tert-butylphenol (TTBP) 732-26-3 Level I Banned Substances. Not intentionally added

Toxaphene Toxaphene 8001-35-2 Level I Banned Substances. Not intentionally added

Halogen F, Cl, Br, I and its compounds — Level Ⅱ Restricted Substance., Br < 900 ppm and Cl < 900 ppm and Br + Cl < 1500 ppm

Carbon tetrafluoride 75-73-0 PFC

Perfluoroethane 76-16-4

Level Ⅱ Restricted Substance. Not intentionally added and can use in production of products which is not present in the final product.

Perfluorooctane sulfonates Perfluorooctanesulfonic acid

1763-23-1

Perfluorooctanesulfonyl fluoride 307-35-7

Perfluorooctanesulfonic acid (ammonium salt) 29081-56-9

Perfluorooctanesulfonic acid (diethanol amine salt)

70225-14-8

Perfluorooctanesulfonic acid (potassium salt) 2795-39-3

Perfluorooctanesulfonic acid (lithium salt) 29457-72-5

2-Propenoic acid, 2-methyl-, 2-[ethyl[(heptadecafluorooctyl)sulfonyl]amino] ethyl ester

376-14-7

2-Propenoic acid, 2-[butyl[(heptadecafluorooctyl)sulfonyl]amino]ethyl ester

383-07-3

2-Propenoic acid, 2-[ethyl[(heptadecafluorooctyl)sulfonyl]amino]ethyl ester

423-82-5

N-allylheptadecafluorooctanesulphonamide 423-86-9

heptadecafluorooctanesulphonamide 754-91-6

PFOS

1-Propanaminium, 3-[[(heptadecafluorooctyl)sulfonyl]amino]-N,N,N-trimethyl-, iodide

1652-63-7

Level I Banned Substance. It can use in production of products, but the final homogenous material <1000 ppm；coating <1μg/m2.；preparation <50 ppm

Anthracene Anthracene 120-12-7 Level Ⅲ Managed Substances. For survey purpose

Cobalt dichloride Cobalt dichloride 7546-79-9 Level Ⅲ Managed Substances. For survey purpose

5-tert-butyl-2,4,6-trinitro-m-xylene (musk xylene)

5-tert-butyl-2,4,6-trinitro-m-xylene 81-15-2 Level Ⅱ Restricted Substance. Threshold <500 ppm

Triethyl arsenate Triethyl arsenate 15606-95-8 Level Ⅲ Managed Substances. For survey purpose

Version: 12





Cyclododecane Cyclododecane 294-62-2 Level Ⅲ Managed Substances. For survey purpose

Triclosan Triclosan 3380-34-5 Level I Banned Substances. Threshold <10 ppm

Bisphenol A Bisphenol A 80-05-7 Level Ⅱ Restricted Substance. Threshold <50 ppm

Perfluorooctyl acid 335-67-1 3825-26-1

Perfluorooctyl acid (Sodium salt) 335-95-5

Perfluorooctyl acid (Potassium salt) 2395-00-8

Perfluorooctyl acid (Silver salt) 335-93-3

Perfluorooctyl acid (Acid Fluoride) 335-66-0

Perfluorooctyl acid (Methyl ester) 376-27-2

PFOA and individual salts and ethers

Perfluorooctyl acid (Ethyl ester) 3108-24-5

Level Ⅱ Restricted Substance. Threshold <50 ppm

Dimethylfumarate Dimethylfumarate (DMF) 624-49-7 Level I Banned Substances. Threshold < 0.1 ppm

Toluene Toluene 108-88-3 Level Ⅱ Restricted Substance. Threshold <1000 ppm

Phenol,2-(2H-benzotriazol-2-yl)-4,6-bis(1,1-dimethylethyl)

Phenol,2-(2H-benzotriazol-2-yl)-4,6-bis(1,1-dimethylethyl)

3846-71-7 Level I Banned Substances. Not intentionally added

Copper 7440-50-8 Copper and its compounds

Other copper compounds —


Gold 7440-57-5 Gold and its compounds

Other gold compounds —


Palladium 7440-5-3 Palladium and its compounds

Other palladium compounds —


Silver 7440-22-4 Silver and its compounds

Other silver compounds —


Version: 12




Appendix 2: Primax heat resistance requirements for lead-free component

[Assumption] Moisture absorption prior to the reflow/flow soldering of components in dry pack.

With components in dry pack, reflow/flow soldering shall be completed within 168 hours after unpacking

(Storage environment:30°C 70%RH)

1.SMT Reflow soldering

Temperature profile

Components size 28mm or less Over 28mm Unit

A Temp. rise gradient °C/sec

Heating time sec

Heating temperature °C

C Temp. rise gradient °C/sec

D Time over 230°C 90 70 sec

Peak temperature 260 250 °C

Peak-temp. hold time Momentary Momentary sec

Soldering times

*1.Length or width, whichever is the greater outside dimension (length for a rectangular component)

*2.Temperatures and time for A through E in the table above shall be measured on the top surface of the comp

2.Flow (wave) soldering (solder dipping)

260°C

5 sec

1 time

SMD：Dipping the entire componentcomponent for Insertion :Dipping to the lead joint of component

3. Hand soldering / touchup

Soldering iron tip temperature 380°C

Soldering time 3 sec

[Notes on Making Reply]

*Please complete the "Primax Heat Resistance Survey for Lead Free Component" on the following page.

* For SMT Component-- supplier must fill-out SMT/ DIP/ Hand soldering condition

* For DIP Component-- supplier must fill-out DIP/ Hand soldering condition.

Conditions

1 - 5

50 - 150

120 - 180

Peak temperature

Dipping time

Soldering

1 - 5

2

Tem

pera

ture

[°C

]

B

E

Time [sec]

Preheating

peak

Roomtemp. B C DA

E

230°C

*1

*2

180°C

120°C*2

Version: 12




Appendix 3: Primax authorized testing laboratory

Test Center Intertek (ITS) SGS Electronics Testing Center， Taiwan(ETC)

TUV Rheinland Centre Testing International (CTI) Pony Testing International Group(PONY)

Green Product Chemical Substances...

Documents

Transcript of Green Product Chemical Substances...