Graphic Design Project

John LoCascio

Explanation

• This project includes two graphic designs for a guitar that might be on sale at Guitar Center as well as a design resource that was an inspiration. I did everything myself as I was working by myself.

Design Resource

1. The red, white, and blue star on the left of the rocket was rotated 90° clockwise to form the red, white, and blue star on the left of the rocket

2. The rocket thruster on the left was reflected over the y-axis to create the thruster on the right

Design Resource Cont.

3. The star on the left of the rocket was translated 1.5 inches horizontally to the left to create the star on the right

Design #1• The Product is a guitar on sale at

Guitar Center

A.

B.

C.

A. The large guitar was dilated 50% to create the smaller guitar

B. The top left guitar was reflected over the x-axis to create the bottom left guitar

C. The top left guitar was rotated 90° counterclockwise to create the bottom left guitar

D. It is symmetric horizontally and vertically

E. After being rotated, the top right guitar was translated 1.25 in. south

E.D.

Design #2• The Product is a guitar on sale at

Guitar Center

A.

A. The large guitar was dilated 50% to create the smaller guitar

B. The top left guitar was reflected over the y-axis to create the top right guitar

C. The top left guitar was rotated approx. 61° counterclockwise to create the top right guitar

D. It is symmetric verticallyE. The bottom left guitar was

translated 0.5 in. east to create the bottom right guitar

E.

B.

C.

D.

Research

• Research:http://www.aiga.org/guide-whatisgraphicdesign/ http://www.creativebloq.com/design/flyer-912663