Grade 80 - THIELE · 2019. 10. 14. · 60 TWN 1320 TWN 1314 TWN 0815 TWN 0795 TWN 0810/4 TWN 0797...

THIELE Lifting Products Grade 80

60

TWN 1320

TWN 1314

TWN 0815

TWN 0795

TWN 0810/4

TWN 0797 TWN 0803 TWN 0810/2TWN 0810/1

TWN 1315

TWN 0817

TWN 0811/1

TWN 0816 TWN 0820

TWN 0811/2

TWN 1313

TWN 0811/4

TWN 0805

Page78 THI-LOK® Connector

Page71-78 Suspension Components

Page70 Round Steel Link Chains

The Namefor Safety.

Product Overview THIELE Lifting Products Grade 80

61

TWN 0860

TWN 0855TWN 0798

TWN 0868

TWN 0855/1

TWN 0799

TWN 0872

TWN 0856

TWN 1340/1

TWN 0873 TWN 0887 TWN 0889

TWN 0858/1 TWN 0859

TWN 0854

TWN 0827 TWN 0827/1 TWN 0851 TWN 0896

Page79-84 Hooks

Page85-86 Shortening Components

62

TWN 1450 TWN 1451 TWN 1452

TWN 0861 TWN 0862 TWN 0870

TWN 0898 TWN 0898/1

TWN 0871 TWN 0897

TWN 0812 TWN 0845 TWN 0869

TWN 0882 TWN 0892 TWN 0893 TWN 0894 TWN 0895

TWN 0869/1 TWN 0875

Page89 Chain Tensioners

Page87-88

Page90-94

Shackles

Special Components and Chains

The Namefor Safety.

63

TWN 0601

TWN 1402

TWN 0950-0952

TWN 0904/0

TWN 0962

TWN 0905/0906

TWN 0967/0

TWN 0920-0922

TWN 0967/1

TWN 1920 TWN 1920

TWN 1908/5TWN 0969TWN 0968

TWN 0930-0932

TWN 0944 TWN 0945 TWN 0946

TWN 0940 TWN 0941

TWN 1400 TWN 1401

Page95-96 Special Components and Chains

Page97-103 Spare Parts and Accessories

64

TWN 0797 TWN 0803 TWN 0805 TWN 0871

The Namefor Safety.

Page107

TWN 0449 TWN 0536 TWN 0710/1

Lashing Chains

Page105

Page110

Form K11 Form K12 Form K22

Endless Chains

Offshore Chain Slings

65

Selection Criteria for Chain Slings

1. Determine the weight of the load to be lifted.

2. Check number of chain-legs required (depending on the numbers of existing lifting points).

3. Determine the trade size by taking the inclination angle into consideration

(see table 1 on page 67, table 2 on page 68 and table 3 on page 69).

4. Consider possible (extreme) temperature influences (see table 4 on page 70).

5. Consider that asymmetry may influence the load factor (see table 5 on page 70).

6. Choose the master links, shortening elements and components suitable for the selected chain trade size.

7. Determine the chain length by considering the total effective reach.

8. Control (inspect) selected components and/or in-use chain slings to ensure that they meet or exceed

all available industry and government safety-laws and regulations (acc. to DGUV).

Special Advices:

Please also consider more complicated conditions of use, such as intermittent impacts or loads when selecting

the slings and/or components. Grade 80 chain slings and components are not allowed to be used over 400°C

temperature. If the slings were used above a temperature of 400°C, then they have to be immediately be

rejected. Please contact the manufacturer. The THIELE assembly system must not be used in the case of

chemical influences such as acids and/or lyes.

THIELE Plant Standard (TWN)

66

• •

• •

• •

• •

• •

• •

• CE-certification

Check interval •

Year •

Inclination angle �

No. of legs

Grade

Working load limit

Nominal chain size

Reg. mark

The Namefor Safety.

Identification Tag

Legal Marking of Grade 80 Chains by the German DGUV

67

67810131618202226283236404550566371

1,121,502,003,155,308,0010,0012,5015,0021,2025,0031,5040,0050,0063,0080,00100,00125,00160,00

1,60 1,122,12 1,502,80 2,004,25 3,157,50 5,3011,20 8,0014,00 10,0017,00 12,5021,20 15,0030,00 21,2033,50 25,0045,00 31,5056,00 40,0071,00 50,0090,00 63,00112,00 80,00140,00 100,00170,00 125,00224,00 160,00

2,36 1,703,15 2,244,25 3,006,70 4,7511,20 8,0017,00 11,8021,20 15,0026,50 19,0031,50 22,4045,00 31,5050,00 37,5067,00 47,5085,00 60,00106,00 75,00132,00 95,00160,00 118,00200,00 150,00265,00 190,00335,00 236,00

0°<� � 45° 45°<� � 60°

1,4 1

[t max.] [t max.]

0°<� � 45° 45°<� � 60°

2,1 1,5

[t max.] [t max.]

� = 0°

1

[t max.]

6-87-88-810-813-816-818-820-822-826-828-8 *32-836-8 *40-8 *45-8 *50-8 *56-8 *63-8 *71-8 *

7β>60°β>60°

Safety Notice:Can fail if damaged, misused or overloaded. Inspect before use. Use only if trained. Observe rated capacity in tables 1, 2, 3. DEATH or INJURY can occur from improper use or maintenance.

• CE-certification

Working Load Limit Tables

Working Load Limit – Type: Direct Sling

1-leg

Nominal Size

[mm]

2-leg 3- and 4-leg

Trade Size

Inclination Angle

Load Factor

Note: THIELE chain slings are available in mounted and welded execution.*These chain slings are only available in welded execution.

Inclination angle

Table 1

68

67810131618202226283236404550566371

0,901,251,602,504,256,308,0010,0011,8017,0020,0025,0031,5040,0050,0063,0080,00100,00125,00

1,251,702,243,556,009,0011,2014,0017,0023,6028,0035,5045,0056,0071,0090,00112,00140,00180,00

0,901,251,602,504,256,308,0010,0011,8017,0020,0025,0031,5040,0050,0063,0080,00100,00125,00

0°<� � 45°

1,12

[t max.]

45°<� � 60°

0,8

[t max.]

1,802,503,155,008,5012,5016,0020,0023,6033,5040,0050,0063,0080,00100,00125,00160,00200,00250,00

1,6

[t max.]

� = 0°

0,8

[t max.]

6-87-88-810-813-816-818-820-822-826-828-8 *32-836-8 *40-8 *45-8 *50-8 *56-8 *63-8 *71-8 *

7β>60°β>60°

Working Load Limit – Type: Choke Hitch

Note: THIELE chain slings are available in mounted and welded execution.*These chain slings are only available in welded execution.

1-leg

Normal-Size

[mm]

2-leg endless chain looped

Trade Size

Inclination Angle

Load Factor

The Namefor Safety.


Inclination angle

Table 2

69

K11 K12 K13

67810131618202226283236404550566371

1,80 1,602,50 2,243,15 2,805,00 4,508,50 7,5012,50 11,8016,00 15,0020,00 18,0023,60 22,4033,50 30,0040,00 35,5050,00 47,5063,00 60,0080,00 71,00100,00 90,00125,00 112,00160,00 140,00200,00 180,00250,00 224,00

� = 0° 0° < � � 25°

1,6 1,45

[t max.] [t max.]

0° < � � 45° 45° < � � 60°

1,12 0,8

[t max.] [t max.]

0° < � � 45° 45° < � � 60°

1,7 1,2

[t max.] [t max.]

1,25 0,901,70 1,252,24 1,603,55 2,506,00 4,259,00 6,3011,20 8,0014,00 10,0017,00 11,8023,60 17,0028,00 20,0035,50 25,0045,00 31,5056,00 40,0071,00 50,0090,00 63,00112,00 80,00140,00 100,00180,00 125,00

1,90 1,322,65 1,803,35 2,365,30 3,759,00 6,3013,20 9,5017,00 11,8021,20 15,0025,00 18,0035,50 25,0042,50 30,0053,00 37,5067,00 47,5085,00 60,00106,00 75,00132,00 95,00170,00 118,00212,00 150,00265,00 190,00

K22 K23

6-87-88-810-813-816-818-820-822-826-828-832-836-840-845-850-856-863-871-8

Working Load Limit – Type: Endless Chain

Nominal Size

[mm]

Trade Size

Inclination Angle

Load Factor


Type K11 Type K12 Type K22

Table 3

70

W1

pW

2

p

d

RAL9005 corrothiel

d[mm]

p[mm]

F01452F01458F01464F01469F01474F01479F01484F01494F01499F01514F01519F01524F01529F01534F01539F01545F01555––

F01453F01459F01465F01470F01475F01480F01485F01495F01500F01515F01520F01525F01530F01535F01540F01546F01556F01566F01598

F01454F01457F01429F01450F01476F01487F04580F04606F04629F04695F01521F01526F04814F04838F04889F04900F04908––

6,007,208,0010,0013,0016,0018,0020,0022,0026,0028,0032,0036,0040,0045,0050,0056,0063,0071,00

18,0021,8024,0030,0039,0048,0054,0060,0066,0078,0084,0096,00108,00120,00135,00150,00170,00190,00210,00

0,240,200,320,400,520,640,901,001,101,301,401,601,802,002,302,502,803,203,60

0,50,60,70,91,21,41,61,82,02,32,52,93,04,04,04,55,06,06,0

7,809,4510,4013,0016,9020,8023,4026,0028,6033,8036,4041,6046,8052,0058,5067,5075,6088,0099,00

22,2025,2029,6037,0048,1059,2066,6074,0081,4096,20104,00118,00133,00148,00167,00180,00201,60230,00260,00

1,121,502,003,155,308,0010,0012,5015,0021,2025,0031,5040,0050,0063,0080,00100,00125,00160,00

0,81,11,42,23,85,77,39,010,915,217,623,029,036,045,556,072,589,0110,0

6-87-88-810-813-816-818-820-822-826-828-8 *32-836-8 *40-8 *45-8 *50-8 *56-8 *63-8 *71-8 *

2 31 4

-1

0°– 45° 45° – 60°1,4 1

0°– 45° 45° – 60°1,4 1

0°– 45° 45° – 60°1 1

AQUA – Chain lacquer

self-coloured

Round Steel Link Chains TWN 0805

*These sling chains are only available in welded finish.Elongation at break, self coloured: min. 25%; bright finished: min 20%. Factor: Working load limit : Proof force : Breaking force = 1 : 2,5 : 4 (200 : 500 : 800 N/mm²)

If Grade 80 - alloy slings are used at temperatures exceeding 200°C, then the working load limit has to be reduced.Before using the alloy slings at temperatures below -40°C, the manufacturer has to be consulted.

Article-No. Working LoadLimit[t max.]

Inside Widthw1

[mm min.]

Outside Widthw2

[mm max.]

Weightapp. [kgs]

Trade Size Nominal Size Pitch

Load Reductions

The Namefor Safety.

Table 4

Table 5

-40°C to 200°C 100 %over 200°C to 300°C 90 %over 300°C to 380°C 75 %

Temperature Application Range Working Load Limit

Load Factor at Asymmetry

Inclination Angle �Load Factor

No. of Legs

Temperature Application Range

tol. �[mm]

tol. �[mm]

71

Neu / NewF122880F122890F122930F122970F123010F123030F123070F123090F123190F123110F123130F123150F123170F123210F123230F123270F123290F123300F123320

1,122,003,155,306,708,0010,0012,5015,0021,2025,0031,5040,0050,0063,0080,00100,00125,00160,00

8 36 1810 46 2313 60 3016 70 3518 85 4020 90 4522 100 5026 120 6028 130 6532 140 7036 160 8040 180 9045 200 10050 220 11056 260 13063 280 14070 320 16080 360 18090 400 200

TWN 0795

B 8B 10B 13B 16B 18B 20B 22B 26B 28B 32B 36B 40B 45B 50B 56B 63B 70B 80B 90

0,050,090,200,360,540,730,971,601,902,904,205,808,2011,0016,0022,0031,0046,5065,50

7,9011,3016,0022,6026,8040,0050,00

5,309,0015,0024,4040,0055,0079,00

340 26 180 100 22 160 90410 32 230 125 26 180 100480 36 250 140 32 230 125570 45 320 175 36 250 140660 50 340 190 45 320 175720 56 380 210 50 340 190810 63 430 240 56 380 210

TWN 0797(Offshore)

F0797268F0797328F0797368F0797458F0797508F0797568F0797638

F

B

D

Dimensions[mm]

D F B

Suspension Components


Weightapp. [kgs]

Trade Size

Intermediate Master LinkType B according to

DIN 5688-3

Article-No. Working L. L.( = 0°- 45°)SF= 1:4[t max.]

Weight

app. [kgs]

Dimensions[mm]

E D F B D1 F1 B1

Acc. to DNV 2.7-1:2013-06.

OffshoreMaster Link Assembly

for 3- and 4-LegWire Rope

72

F0803208F0803228F0803268F0803328F0803368F0803408F0803458F0803508F0803568F0803638F0803708F0803808

4,755,608,0012,5016,0019,0025,0031,5040,0050,0063,0080,00

1,101,502,304,406,208,8012,0016,0023,0033,0044,0064,00

20 140 8022 160 9026 180 10032 230 12536 250 14040 290 16045 320 17550 340 19056 380 21063 430 24070 470 26080 520 290

TWN 0803(Offshore)

The Namefor Safety.


Acc. to DNV 2.7-1:2013-06.


Dimensions[mm]

D F B

Weightapp. [kgs]

OffshoreOblong Master Link

Type A

73

F08101068F08101088F08101108F08101138F08101168F08101228

F08102068F08102088F08102108F08102138F08102168F08102228

F08104068F08104088F08104108F08104138F08104168F08104228

1,122,003,155,308,0015,00

1,602,804,257,5011,2021,20

2,364,256,7011,2017,0031,50

0,401,001,202,304,0010,0

0,501,201,904,007,6019,60

1,403,105,4011,1019,0042,80

121 13 90 50147 16 110 60176 18 130 70219 22 160 90255 26 180 100350 36 250 140

121 13 90 50167 18 130 70186 20 140 80239 26 180 100305 32 230 125420 45 320 175

201 16 110 60 13267 22 160 90 16316 26 180 100 20409 32 230 125 26495 40 290 160 28620 50 340 190 40

TWN 0810/1

TWN 0810/2

TWN 0810/4

6-88-810-813-816-822-8

6-88-810-813-816-822-8

6-88-810-813-816-822-8


Article-No.

Article-No.

Article-No.

Working LoadLimit[t max.]

Working Load Limit (� = 0° - 45°)

[t max.]


[t max.]

Dimensions[mm]

E D F B

Dimensions[mm]

E D F B

Dimensions[mm]

E D F B D1

Weightapp. [kgs]

Weightapp. [kgs]

Weightapp. [kgs]

Trade Size

Trade Size

Trade Size

Fixed Size Master LinkAssembly Type TAA 1for 1-Leg Sling Chains

Fixed Size Master LinkAssembly Type TAA 2for 2-Leg Sling Chains

Fixed Size Master LinkAssembly Type TAA 4

for 3- and 4-Leg Sling Chains

74

F08111068F08111088F08111108F08111138F08111168F08111188F08111228

F08112068F08112088F08112108F08112138F08112168F08112188F08112228

F08114068F08114088F08114108F08114138F08114168F08114188F08114228

1,122,003,155,308,0010,0015,00

1,602,804,257,5011,2014,0021,20

2,364,256,7011,2017,0021,2031,50

0,310,571,141,843,205,408,00

0,420,781,603,305,107,9013,00

1,202,294,078,2813,1020,0032,60

91 13 60 30107 16 70 35136 20 90 45159 22 100 50195 26 120 60219 32 140 70260 36 160 80

91 13 60 30107 16 70 35136 20 90 45179 26 120 60205 28 130 65219 32 140 70280 40 180 90

161 16 70 35 13197 20 90 45 16236 22 100 50 20299 26 120 60 26345 32 140 70 28379 36 160 80 32460 40 180 90 40

TWN 0811/1

TWN 0811/2

TWN 0811/4

6-88-810-813-816-818-822-8

6-88-810-813-816-818-822-8

6-88-810-813-816-818-822-8

The Namefor Safety.


Article-No.

Article-No.

Article-No.



[t max.]


[t max.]

Dimensions[mm]

E D F B

Dimensions[mm]

E D F B

Dimensions[mm]

E D F B D1

Weightapp. [kgs]

Weightapp. [kgs]

Weightapp. [kgs]

Trade Size

Trade Size

Trade Size

Fixed Size Master LinkAssembly Type TAB 1for 1-Leg Sling Chains

Fixed Size Master LinkAssembly Type TAB 2for 2-Leg Sling Chains

Fixed Size Master LinkAssembly Type TAB 4

for 3- and 4-Leg Sling Chains

75

Neu / New

F08150616F08150816F08151016F08151316F08151616F08151816F08150625F08150825F08151025F08151325F08151625F08151825F08152025F08152225F08150640F08150840F08151040F08151340F08151640F08151840F08152040F08152240

16161616161625252525252525254040404040404040

1,122,003,155,308,0010,001,122,003,155,308,0010,0012,5015,001,122,003,155,308,0010,0012,5015,00

1,672,602,603,174,307,802,542,543,785,076,9510,99,979,973,733,735,337,059,4114,513,513,5

TWN 0815

6-88-810-813-816-818-86-88-810-813-816-818-820-822-86-88-810-813-816-818-820-822-8

320 18 260 140 13 60 30330 22 260 140 16 70 35330 22 260 140 16 70 35260 26 260 140260 30 260 140370 36 250 140 26 120 60400 20 340 180 13 60 30400 20 340 180 13 60 30410 24 340 180 16 70 35410 28 340 180 16 70 35430 32 340 180 20 90 45440 40 340 180 22 100 50340 40 340 180340 40 340 180490 22 430 220 13 60 30490 22 430 220 13 60 30500 26 430 220 16 70 35500 30 430 220 16 70 35520 34 430 220 20 90 45530 42 430 220 22 100 50430 42 430 220430 42 430 220

Neu / New

F08160616F08160816F08161016F08161316F08161616F08160625F08160825F08161025F08161325F08161625F08161825F08162025F08160640F08160840F08161040F08161340F08161640F08161840F08162240

16161616162525252525252540404040404040

1,602,804,257,5011,201,602,804,257,5011,2014,0017,001,602,804,257,5011,2014,0021,20

1,882,963,905,759,433,264,145,437,6811,911,918,65,705,707,429,8815,515,523,7

TWN 0816

6-88-810-813-816-86-88-810-813-816-818-820-86-88-810-813-816-818-822-8

320 18 260 140 13 60 30330 22 260 140 16 70 35330 26 260 140 16 70 35350 30 260 140 20 90 45370 36 250 140 26 120 60400 22 340 180 13 60 30410 24 340 180 16 70 35410 28 340 180 16 70 35430 32 340 180 20 90 45440 40 340 180 22 100 50440 40 340 180 22 100 50480 45 340 180 32 140 70500 26 430 220 16 70 35500 26 430 220 16 70 35500 30 430 220 16 70 35500 34 430 220 20 90 45530 42 430 220 22 100 50530 42 430 220 22 100 50570 48 430 220 32 140 70


Article-No. Working Load Limit[t max.]

Dimensions[mm]

E D F B D1 F1 B1

Weight app. [kgs]

Trade Size Suitable for CraneHooks acc. DIN15401 [No.]

Oversize Master Link Assyfor 1-Leg Sling Chains

suitable for Crane HooksDIN 15401

(16 t, 25 t, 40 t)

Article-No. Working Load Limit(� = 0° - 45°)

[t max.]

Dimensions[mm]

E D F B D1 F1 B1

Weight app. [kgs]


Oversize Master Link Assyfor 2-Leg Sling Chains

suitable for Crane HooksDIN 15401

(16 t, 25 t, 40 t)

76

Neu / New

F08170616F08170816F08171016F08171316F08171616F08170625F08170825F08171025F08171325F08171625F08172025F08170640F08170840F08171040F08171340F08171640F08171840F08172240

161616161625252525252540404040404040

2,364,256,7011,2017,002,364,256,7011,2017,0026,502,364,256,7011,2017,0021,2031,50

2,963,905,759,439,434,145,437,6811,9013,2032,305,707,4210,1015,5016,8023,7032,30

TWN 0817

6-88-810-813-816-86-88-810-813-816-820-86-88-810-813-816-818-822-8

330 22 260 140 16 70 35330 26 260 140 16 70 35350 30 260 140 20 90 45370 36 250 140 26 120 60370 36 250 140 26 120 60410 24 340 180 16 70 35410 28 340 180 16 70 35430 32 340 180 20 90 45440 40 340 180 22 100 50460 40 340 180 26 120 60590 55 430 220 36 160 80500 26 430 220 16 70 35500 30 430 220 16 70 35520 34 430 220 20 90 45530 42 430 220 22 100 50550 42 430 220 26 120 60570 48 430 220 32 140 70590 55 430 220 36 160 80

F31000F31010F31020F31030Z05828

2,003,205,008,0011,20

0,360,861,603,005,58

TWN 0820

8-810-813-816-819-8

93,5 68,0 38,0126,0 95,0 49,0158,5 120,0 60,0187,0 140,0 80,0261,0 203,0 98,0

The Namefor Safety.


Article-No. Working Load Limit(� = 0° - 45°)

[t max.]

Dimensions[mm]

E D F B D1 F1 B1

Weightapp. [kgs]


Oversize Master Llink Assyfor 3- and 4-Leg Sling Chainssuitable for Crane HooksDIN 15401 (16 t, 25 t, 40 t)


Dimensions[mm]

E F B

Weightapp. [kgs]

Trade Size

Master Linkwith Pin Coupling

77

F1313013F1313016F1313018F1313020F1313022F1313026F1313032F1313036F1313040F1313045F1313050F1313056F1313063F1313070F1313080F1313085F1313095F1313110

2,003,204,004,805,608,0012,5016,0019,0025,0031,5040,0050,0063,0080,00100,00125,00160,00

0,290,530,791,101,502,304,406,208,8012,0016,0023,0033,0044,0064,0073,00100,00160,00

13 90 5016 110 6018 130 7020 140 8022 160 9026 180 10032 230 12536 250 14040 290 16045 320 17550 340 19056 380 21063 430 24070 470 26080 520 29085 520 29095 580 320110 680 380

TWN 1313

6 (7)810

1316

22

3236404550566371

6(7)810

13161820222628323640455056

Neu / New

F1314016F1314020F1314026F1314032F1314040F1314045F1314050F1314050AF1314063F1314063AF1314080F1314085F1314095F1314110F1314110A

3,154,758,0012,5019,0025,0031,5031,5050,0050,0071,0085,00112,00132,00160,00

1,401,803,807,7013,0018,0025,0028,0049,0049,0086,00106,00146,00223,00252,00

TWN 1314

6-88-810-813-816-818-820-822-826-828-832-836-840-845-850-8

170 16 110 60 13 60 30210 20 140 80 16 70 35270 26 180 100 20 90 45350 32 230 125 26 120 60420 40 290 160 28 130 65460 45 320 175 32 140 70500 50 340 190 36 160 80520 50 340 190 40 180 90630 63 430 240 45 200 100630 63 430 240 45 200 100740 80 520 290 50 220 110780 85 520 290 56 260 130860 95 580 320 63 280 1401000 110 680 380 70 320 1601040 110 680 380 80 360 180


Oblong Master Link Type A


Dimensions[mm]

D F B

Weightapp. [kgs]

For Chain SlingsTrade Size

1-Leg 2-Leg

Article-No. Working Load Limit(� = 0° - 45°)[t max.]

Dimensions[mm]

E D F B D1 F1 B1

Weight app. [kgs]

Trade Size

Master Link Assembly for 3- and 4-Leg Sling Chains

New

New

Note: The new TWN 1313 replaces the TWN 0807 and TWN 0808.Rated for 2-leg chain slings use with inclination angle 0°< � � 45°.

Note: The new TWN 1314 replaces the TWN 0809.

78

F30806F30816F30826F30836F30846F30850F30855F30860F30870F30880

1,122,003,155,308,0010,0012,5015,0021,2031,50

0,070,160,300,601,201,862,333,165,009,33

46 15 62 42 11 656 20 78 55 14 969 25 93 68 18 1284 30 116 75 23 15102 35 146 97 26 19122 36 165 110 31 22134 45 185 122 36 26145 46 198 132 38 26164 55 225 156 44 30192 65 268 192 55 37

TWN 1320

6-87/8-810-813-816-818-820-822-826-832-8

THI-LOK®

2,804,005,307,5011,1016,0021,0031,6040,2050,10101,80

1,101,903,105,309,0015,0024,0040,0055,0079,00200,00

1113141822262836404460

200 16 110 60 13 90 50240 18 130 70 16 110 60290 22 160 90 18 130 70340 26 180 100 22 160 90410 32 230 125 26 180 100480 36 250 140 32 230 125570 45 320 175 36 250 140660 50 340 190 45 320 175720 56 380 210 50 340 190810 63 430 240 56 380 2101040 85 520 290 80 520 290

TWN 1315

1012141620242836404460

F1315016F1315018F1315022F1315026F1315032F1315036F1315045F1315050F1315056F1315063F1315085


Dimensions[mm]

E G A C B F

Weightapp. [kgs]

Trade Size

The Namefor Safety.


THI-LOK® Connector

Article-No. Working LoadLimit

( = 0°- 45°)[t max.]SF= 1:4

Weight

app. [kgs]

Dimensions[mm]

E D F B D1 F1 B1

Categorization of the wire rope diameter

Fiber Rope Steel Rope[mm] [mm]

Master Link Assemblyfor 3- and 4-legWire Rope Slingsacc. to EN 13414-1

Note: The new TWN 1315 replaces the TWN 0796.

New

79

Z07274Z07275Z07276Z07277Z07278F092255F092275

1,122,003,155,308,0012,5015,00

0,480,821,653,125,887,339,91

106 22,5 28 22 15133 24 35 25 20167 32 45 35 27208 39 54 41 33250 49 67 54 39257 60 74 57 43290 71 88 62 52

TWN 0798

6-87/8-810-813-816-818/20-822-8

Z07279Z07280Z07281Z07282Z07296F0922055

F336010F336110F336210F336310F336410F33651F33656F33661

1,122,003,155,308,0012,50

1,122,003,155,308,0010,0012,5015,00

0,570,931,753,256,207,28

0,360,751,402,504,407,599,6810,62

98 28 22 15122 33 25 20150 45 35 27186 54 41 33215 67 54 39215 74 57 43

75 24 20 1792 30 25 22113 37 32 28133 42 41 35162 51 50 41195 60 52 50220 65 58 55244 75 64 61

TWN 0799

TWN 1340/1

6-88-810-813-816-818/20-8

6-88-810-813-816-818-8*20-8*22-8*

Hooks

Note: The new TWN 1340/1 replace the TWN 0835/1 (only trade sizes 6-8 to 16-8).With heavy duty forged safety latch.

*TWN 0835/1


Dimensions[mm]

E D G H C1

Weightapp. [kgs]

Trade Size

Eye Self-Locking Hook

Article-No.

Article-No.

Working Load Limit[t max.]


Dimensions[mm]

E G H C

Dimensions[mm]

E G H C

Weightapp. [kgs]

Weightapp. [kgs]

Trade Size

Trade Size

Clevis Self-Locking Hook

Clevis Sling Hook with Safety Latch

New

80

F32103*F32100F32110F32120F32130F32140

0,751,122,003,155,308,00

0,360,381,001,202,084,45

113,5 19 14 13 25 30 10

113 21 19 14 25 30 10

155 25 24,5 19 42 44 16

162 28 28,5 21 42 44 16

190 34 33 28 43 51 19

247 42 43 35 60 64 25

TWN 0854

0,75-8M6-88-810-813-816-8


Dimensions[mm]

E G H C F B D

Weightapp. [kgs]

Trade Size

Swivel Hook with Safety Latch

*Upon request.Note: Also available for wire ropes and thimbles; Swivel hooks are only for stripping and not built for twisting purposes under load.

The Namefor Safety.

Hooks

81

Z04079Z04083Z04080Z04081

Z06159Z06160Z06161Z06162

Z00456F32360F32370F32380F32390F32400Z00457Z00458Z00459

40,0050,0063,0080,00

40,0050,0063,0080,00

1,122,003,155,308,0012,5015,0021,2031,50

31,5046,0063,0080,00

32,3047,0064,4081,90

0,530,931,663,155,417,5011,4013,6028,00

388 72 109 103 78442 84 124 116 89494 90 138 130 99610 102 155 145 110

388 72 109 103 78442 84 124 116 89494 90 138 130 99610 102 155 145 110

95 13 50 24 20125 18 66 33 27146 20 76 35 32175 26 89 41 38205 32 102 48 45235 40 114 54 51265 47 127 70 65305 52 136 80 72327 60 162 93 83

TWN 0855

TWN 0855/1

TWN 0856

36-840-845-850-8

36-840-845-850-8

6-88-810-813-816-818/20-822-826-832-8

Hooks


Dimensions[mm]

E D G H C

Weightapp. [kgs]

Trade Size


Dimensions[mm]

E D G H C

Weightapp. [kgs]

Trade Size


Dimensions[mm]

E D G H C

Weightapp. [kgs]

Trade Size

Eye Sling Hook

Eye Sling Hook with Safety Latch

Eye Foundry Hook

82

F329010F329110F329210F329310F329410F329510F329710F329810F329910

1,122,003,155,308,0012,5015,0021,2031,50

0,360,781,502,554,658,709,7714,2023,80

91 21 11 24 20 17118 28 14 30 25 22145 36 18 37 32 28168 42 21 42 41 35210 54 25 51 50 41270 62 30 65 58 55271 65 30 70 62 54302 70 33 75 71 59350 80 38 90 86 67

TWN 0858/1

6-88-810-813-816-818/20-822-826-832-8

F33310F33320F33330F33340

2,003,155,308,00

1,001,613,405,50

110 66 33 27133 76 35 32159 89 41 38189 102 48 45

TWN 0859

8-810-813-816-8

F18130F18160F18180F18200F18220F18230F18250F18260F18280F18290F18300F18310F18320F18330

0,150,250,400,801,121,502,003,154,004,505,306,008,0010,00

0,120,210,480,911,201,903,404,806,8010,0014,6020,5027,4039,00

80 28 14 10 16100 36 18 12 20130 46 23 16 25160 56 28 20 30180 64 32 22 32200 70 35 26 35230 80 40 32 40260 90 45 36 45300 104 52 40 52350 122 61 45 60400 140 70 51 68450 158 79 57 75500 160 80 63 80550 166 83 72 85

TWN 0860

6-87-88-810-8

13-8

16-818-8

SOLIDO®

Eye Sling Hook with Safety Latch

The Namefor Safety.

Hooks


Dimensions[mm]

E D1 D2 G H C

Weightapp. [kgs]

Trade Size


Dimensions[mm]

E G H C

Weightapp. [kgs]

Trade Size

Clevis Foundry Hook


Dimensions[mm]

E G R D B

Weightapp. [kgs]

Trade Size

S-Hook

Note: Forged safety latch.

83

F35600F35601F35602F35603F35604F35605F35606F35607F35608

1,602,804,257,5011,2017,0021,2030,0045,00

2,403,508,0010,5022,0025,0034,0050,0069,00

90 60 32 60 2090 80 38 70 25140 90 50 80 30145 100 62 90 35155 120 76 110 45175 130 92 120 62205 130 95 140 65230 140 115 160 75255 140 135 180 85

TWN 0873

6-88-810-813-816-818/20-822-826-832-8

F32608F32641

5,3015,00

3,3015,12

174 226 28 20 49 57 60

274 345 44 30 80 90 95

TWN 0868

13-822-8

F35500F35501F35502F35503F35504F35505F35506F35507F35508

1,602,804,257,5011,2017,0021,2030,0045,00

2,504,008,5011,0016,8030,0040,3061,5085,50

150 180 90 60 15 60 20

157 197 90 80 20 70 25

230 278 140 90 22 80 30

241 312 145 100 26 90 35

270 354 155 120 32 110 45

322 398 175 130 40 120 62

364 456 205 130 44 140 65

409 501 230 140 52 160 75

457 557 255 140 64 180 85

TWN 0872

6-88-810-813-816-818/20-822-826-832-8

Note: May only be used in pairs, at inclination angle � = 15-30°.

Hooks


Dimensions[mm]

B C D F H

Weightapp. [kgs]

Trade Size

Plate Hook for Basket Chain

Article-No. Working Load Limit

[t max.]

Dimensions[mm]

B A D1 D2 G H C

Weightapp. [kgs]

Trade Size

Pipe Transport Hook



Dimensions[mm]

E E1 B C D F H

Weightapp. [kgs]

Trade Size

Plate Hook for Basket Chain


84

F32160 0,35 0,2498,5 14 14 14 9 20 16

TWN 0887

F33439 0,50 0,55137 19 13 12

TWN 0889

6-8*

*Note: For trade size 6-8, but WLL limited to max 0,5 t.

The Namefor Safety.

Hooks


Dimensions[mm]

E G H C D F B

Weightapp. [kgs]

Trade Size

Swivel Hook


Dimensions[mm]

E G H C

Weightapp. [kgs]

Trade Size

Lifting Hook for Engines

85

F33200F33210F33220F33230F33245

F33201F33211F33221F33231F33246

2,003,155,308,0012,50

2,003,155,308,0012,50

0,530,972,183,407,30

0,540,992,183,457,35

61 9 101 6173 12 125 7595 15 160 95112 18 188 120148 22,5 242 141

61 9 101 6173 12 125 7595 15 160 95112 18 188 120148 22,5 242 141

TWN 0827

TWN 0827/1

8-810-813-816-820-8

8-810-813-816-820-8

TWN 0851

54 81 3274 108 4380 115 4690 134 56117 175 72144 214 86162 241 98158 241 98198 295 118195 309 130240 381 160

6-87-88-810-813-816-818-820-822-826-832-8

F34910F34920F34925F34930F34940F34950F34960F34970F34980F34985F34990

1,121,502,003,155,308,0010,0012,5015,0021,2031,50

0,210,420,560,942,103,575,405,409,0012,0019,00

Shortening Components

Note:With extra wide chain bed.

Note: With extra wide chain bed, complies to DIN 5692.

Article-No.

Article-No.



Dimensions[mm]

E G L B

Dimensions[mm]

E G L B

Weightapp. [kgs]

Weightapp. [kgs]

Trade Size

Trade Size

Clevis Shortening Hook

Clevis Shortening Hookwith Safety Pin


Dimensions[mm]

E L M

Weightapp. [kgs]

Trade Size

Clevis Shortening Claw

86

F0896068F0896088F0896108F0896138F0896168F0896188F0896228

1,122,003,155,308,0010,0015,00

0,320,681,412,604,606,3012,00

137 31 60 10 46 23176 38 78 13 60 30215 46 99 16 70 35270 59 126 18 85 40326 76 150 22 100 50347 79 168 22 100 50450 100 210 32 140 70

TWN 0896

6-88-810-813-816-818-822-8

F30601F30611F30621F30631

F30600F30610F30620F30630

3,155,308,0010,00

3,155,308,0010,00

0,611,242,103,93

0,671,372,284,37

64 16 32 36 21 4783 20 40 49 27 6199 24 48 56 33 75115 30 60 63 42 100

64 16 32 36 21 4783 20 40 49 27 6199 24 48 56 33 75115 30 60 63 42 100

TWN 0861

TWN 0862

10-813-816-818-8

10-813-816-818-8

Shackles


Dimensions[mm]

E E1 E2 B-Link

Weightapp. [kgs]

Trade Size

Shortening Device for fixed size Master Link

The Namefor Safety.

Shortening Components

Chain CouplingShackle with Safety Bolt

Chain Coupling Shackle with Safety Bolt, Nut

and Cotter Pin

Article-No.

Article-No.



Dimensions[mm]

E D C F B1 B2

Dimensions[mm]

E D C F B1 B2

Weightapp. [kgs]

Weightapp. [kgs]

Trade Size

Trade Size

87

F30311F30321F30331F30341F30351F30361F30371F30381F30391F30401F30411

Z04147Z04145F30310F30320F30330F30340F30350F30360F30370F30380F30390F30400F30410

11,62,5456810121620

0,40,611,62,5456810121620

3,155,308,0012,5015,0021,2025,0031,5040,0050,0063,00

1,122,003,155,308,0012,5015,0021,2025,0031,5040,0050,0063,00

0,350,741,302,604,005,7010,0010,5013,9020,5026,60

0,100,200,450,841,403,104,506,3010,1012,3015,6022,2026,30

TWN 0870

TWN 0871

10-813-816-818/20-822-826-828-832-836-840-845-8

6-8*8-810-813-816-818/20-822-826-828-832-836-840-845-8

49 15 16 32 21 4761 19 20 40 27 6173 23 24 48 33 7591 29 30 60 42 96111 33 36 72 47 107120 37 39 78 53 121140 41 45 90 60 136147 45 48 96 66 150158 50 52 104 73 167185 55 60 120 81 185211 61 68 136 90 206

30 8 10 20 14 3036 10 12 24 17 3749 15 16 32 21 4761 19 20 40 27 6173 23 24 48 33 7591 29 30 60 42 96111 33 36 72 47 107120 37 39 78 53 121140 41 45 90 60 136147 45 48 96 66 150158 50 52 104 73 167185 55 60 120 81 185211 61 68 136 90 206

F30586F30596

1,122,00

0,470,54

70 20 39 46 35 6570 20 40 46 35 65

TWN 0897

6-88-8

*Finish: Electro galvanized, welded on nut.

Article-No.

Article-No.



Dimensions[mm]

E D1 D2 C B1 B2

Dimensions[mm]

E D1 D2 C B1 B2

Weightapp. [kgs]

Weightapp. [kgs]

Trade Size

Trade Size

Nominal Size

[DIN 82101]

Nominal Size

[DIN 82101]

Bolt Shackle Type C

Safety Bolt Shackle Type Cwith Nut and Cotter Pin

Shackles

Special Coupling Bolt Shackle with Safety Bolt,

Nut and Cotter Pin


Dimensions[mm]

E D1 C2 F B1 B2

Weightapp. [kgs]

Trade Size

88

F38355F38370

F38357

3570

35

11,8631,46

11,62

166 48 60 96 66 150 186

231 68 85 136 90 206 256

171 38 60 96 48 150 186

TWN 0898

TWN 0898/1

1020

10

The Namefor Safety.

Shackles

Article-No.

Article-No.



Dimensions[mm]

E D H C B1 B2 A

Dimensions[mm]

E D H C B1 B2 A

Weightapp. [kgs]

Weightapp. [kgs]

Trade Size

DIN 82016

Trade Size

DIN 82016

Cargo Shackle

Cargo Shackle with Bush

89

F34179F34199F34189

F34175F34195F34185

F341871F34197

180022002600

180022002600

26003100

4063100

4063100

100160

2,102,704,00

2,503,505,00

7,2011,80

345 270 75375 275 100460 340 120

345 270 75375 275 100460 340 120

675 445 230835 555 280

TWN 1450

TWN 1451

TWN 1452

8-810-813-8

8-810-813-8

13-816-8

Chain Tensioners

Article-No.

Article-No.

Article-No.

Norm. straightload (STF)[daN min.]



Dimensions[mm]

Emax. Emin. hub

Dimensions[mm]

Emax. Emin. hub

Dimensions[mm]

Emax. Emin. hub

Weightapp. [kgs]

Weightapp. [kgs]

Weightapp. [kgs]

Trade Size

Trade Size

Trade Size

Lashing Capacity(LC)

[kN max.]


[kN max.]


[kN max.]

Short Chain Tensioneracc. to DIN EN 12195-3

Short Chain Tensionerwith Ratchet

acc. to DIN EN 12195-3

Chain Tensioner (long lift)acc. to DIN EN 12195-3

Note: Can also be used in slings; also rated for lifting.



90

F31700F31710F31720F31730F31740F31750F31760

1,122,003,155,308,0010,0015,00

0,100,200,400,871,602,503,80

31 17 39 837 21 50 1146 26 62 1459 33 79 1875 42 99 2279 47 111 25100 55 136 31

TWN 0812

6-88-810-813-816-818-822-8

TWN 0845

108 27 30168 44 44168 44 44184 46 51252 66 64

6-88-810-813-816-8

F34000F34010F34020F34030F34040

1,122,003,155,308,00

0,331,331,332,104,45

Special Sling Components

The Namefor Safety.


Dimensions[mm]

E D1 D2 B

Weightapp. [kgs]

Trade Size

Ringshackle


Dimensions[mm]

E F B

Weightapp. [kgs]

Trade Size

Swivel

91

F313800F313850

3,15 6,3012,50

5,308,00

5,3010,0020,00

1,921,92

4,0217,46–

142 57,5 65 122141 57,5 65 122

13 60 3018 85 4026 120 60

TWN 0869

TWN 0875

13-816-8

123

F31410 1,60110 45 68 82

TWN 0869/1

1

H

L

D

B


Note: Please indicate the dimension of the crane hook or crane hook no.



from to

Dimensions[mm]

E F B A

Dimensions[mm]

L D F B

Weightapp. [kgs]

Weightapp. [kgs]

Trade Size

Trade Size

Skip Suspension Linkwith Pin Coupling andforged Safety Latch

Reduction Assembly

Article-No. Dimensions[mm]

L D B H

Weightapp. [kgs]

Trade Size

ContainerCentring Pivo

New

New

92

F48300F48303F48306F48309F48312F48313F48322F48315F48319F48321F48325

0,400,801,503,405,608,4010,9015,2024,7047,4064,92

42 100 14 18 8 11 1056 130 18 22 10 15 1270 160 22 28 13 19 1591 210 28 40 16 25 20110 260 36 42 20 30 25130 290 40 54 23 34 25130 300 42 54 25 35 30140 330 46 56 28 39 35170 390 54 66 33 46 40210 480 68 80 40 54 50200 700 68 80 40 56 50

TWN 0882

6-88-810-813-816-818-820-822-826-832-832-8

1,602,804,257,5011,2014,0017,0021,2030,0045,00

1,122,003,155,308,0010,0012,5015,0021,2031,50

711242003404906287859501.3001.960

6-88-810-813-816-818-820-822-826-832-8

F

H

Article-No. Dimensions[mm]

E A D1 D2 B C F

Weightapp. [kgs]

Trade Size


0°<� � 45° 45°<� � 60°

Breaking Force

[kN min.]

Trade Size

Balancer

The Namefor Safety.


93

F34250

F08811F08812

3,15

1,601,60

0,82

1,702,30

TWN 0892

TWN 0894

10-8

10-810-8

168 17 20 17 40 25

405,5 13 60 30 95 14,5675,5 13 60 30 95 14,5

F08904F08912F08898F08899

1,122,003,155,30

1,732,163,255,27

307 18 130 70 24 20 17

329 18 130 70 30 25 22

371 18 130 70 37 32 28

425 22 160 90 42 41 35

TWN 0893

6-88-810-813-8

D

L

B1

H

B

C


Note: Isolates a power flow rate till max. 1.000 Volt.

Article-No.

Article-No.



Dimensions[mm]

E d D1 D2 D3 F

Dimensions[mm]

L D C B B1 H

Weightapp. [kgs]

Weightapp. [kgs]

Trade Size

Trade Size

Key Hook

T-Handle Chain


Dimensions[mm]

E D F B G H C

Weightapp. [kgs]

Trade Size

Isolation Assembly

94

F30975 5,30 1,2079 36 28 28 82

TWN 0895

13-8


Note:Working load limit for vertical load only.

The Namefor Safety.


Dimensions[mm]

E D F G A

Weightapp. [kgs]

Trade Size

Swivel Adapter

95

F34171F34172F34173F34174

F34171RF34172RF34173R

4063100160

4063100

8,5012,5021,0037,70

8,5012,5021,00

8-810-813-816-8

8-810-813-8

TWN 1400

TWN 1401

Lashing Chains

Article-No.

Article-No.

Lashing Capacity (LC) under straight load

[kN max.]

Lashing Capacity (LC) under straight load

[kN max.]

Weightapp.[kgs]

Weightapp.[kgs]

Trade Size

Trade Size

Lashing Chain with Spindle Tensioner

Lashing Chain with Ratchet

96

F08945F08946F08947F08948F08961

776940

1.0021.1261.362

20 90 4526 120 6026 120 6032 140 7040 180 90

45 260 15551 260 15557 300 16557 300 16563 330 165

16-820-822-826-832-8

21,3033,4040,2556,2585,20

21,535,546,064,0108,0

TWN 0601

The Namefor Safety.

Magnet Chain Slings TWN 0601

Note: The Magnet Chain Slings acc. to this works standard are made for safe lift of electro magnets. The dimensions, working load limits as well as the manufacturing proof- and break-force comply with the ASTM A391/A391M, the marking meets the requirement of the EN 818-1.The D-type master links and the B-type connecting- and intermediate links comply with DIN 5688-3.The ratio between working load to proof load to break load is 1 : 2 : 4.The maximum inclination angle is 30°.


WorkingLength [mm]

E

Weightapp. [kgs]

Trade Size D-Link[mm]

D1 F1 B1

Master-Link[mm]

D2 F2 B2

97

Artikel-Nr.Article-No.

NenndickeNominal Size

[mm]

TWN 0904/0

6-88-810-813-816-818-820-822-826-832-8

F48694F48352F48355F48358F48361F48364F48369F48367F48373F48371

0,010,010,030,070,110,200,260,310,500,91

TWN 0905 / 0906

10-813-816-818/20-822-826-828-832-836-840-8

F48036F48039F48042F48045F48048F48051F48054F48057F48060F48063

0,070,140,250,440,781,051,602,022,603,89


[mm]

TWN 0920 - 0922

6-88 -810-813-816-836-840-845-850-8

F48420F48423F48426F48429F48469

Z06163Z06164Z06165Z06166

0,020,030,040,110,190,801,001,401,90

Spare Parts and Accessories

Trade Size

Load Pinfor Clevis Type Hooks

Article-No. Packaging Unit Weightapp. [kgs]

Trade Size

Load-Spirol Pins for ChainCoupling Shackles and

Chain Shackles

(TWN 0861, TWN 0870)


Trade Size

Latch Set for Eye Hooks andSwivel Hooks

(TWN 0854, 0855/1)

Article-No.

TWN 0854 TWN 0855/1

Packaging Unit Weightapp. [kgs]

1 set1 set1 set1 set1 set1 set1 set 1 set1 set1 set

1 set1 set1 set1 set1 set1 set1 set 1 set1 set1 set

1 set1 set1 set1 set1 set1 set1 set1 set1 set

98

TWN 1920

6-88-810-813-816-8

18-820-822-826-832-8

F486012F486042F486072F486102F486132

F48615F48617F48619F48622F48625

0,010,020,040,060,11

0,170,270,280,470,85



[mm]

TWN 0930-0932

10-813-816-818/20-822-826-828-832-836-840-845-8

F30451F30461F30471F30481F30491F30501F30511F30521F30531F30541F30551

0,130,250,360,971,311,992,893,694,486,658,20

TWN 1920

The Namefor Safety.

1 set1 set1 set1 set1 set


1 set1 set1 set1 set1 set1 set1 set 1 set1 set1 set1 set

Trade Size

Trade Size

Spare Part Set for THI-LOK®

(TWN 1320)

Spare Part Set for THI-LOK®

(TWN 1320)

Article-No.

Article-No.

Packaging Unit

Packaging Unit

Weightapp. [kgs]

Weightapp. [kgs]

Trade Size

Spare Part Set for chain couplings Bolt Shackle

and C-Shackle

(TWN 0862, TWN 0871)



99

TWN 0962

13/16-8 0,28



[mm]

TWN 0950-0952

8-810-813-816-820-8

F48330F48328F48329F48339F48345

0,010,020,030,050,10

TWN 0967/0

6-88-810-813-816-818/20-8

0,010,020,030,060,170,22

F333700F333711F333721F333730F333741F0922057

Trade Size

Spare Set for Skip Suspension Link

(TWN 0869) Old version


F31404 1 set



Trade Size

Spare Part Set forShortening Hook

(TWN 0827/1)


Trade Size

Spare Pin for Clevis Self-Locking Hook

(TWN 0799)


1 set 1 set 1 set 1 set 1 set 1 set

100

TWN 0968

13-816-8

0,070,12

F480131F480161

TWN 0967/1

6-88-810-813-816-818/20-822-8

F329090F329190F329290F329390F329490F0922056F0922056

0,020,030,040,060,110,270,33

TWN 0969

13/16-8 0,20


The Namefor Safety.

Trade Size

Spare Pin for Skip Suspension Link

(TWN 0869)New version


1 set 1 set

Trade Size

Trigger Set for Self-Locking Hooks

(TWN 0798, TWN 0799)

Article-No. Packaging Unit

1 set1 set1 set1 set1 set1 set1 set

Weightapp. [kgs]

Trade Size

Spare Set forSkip Suspension Link

(TWN 0869)New version


F314081 1 set

101

TWN 1908/5

6-88-810-813-816-818-8*

18/20-822-822-8*26-832-8

F48730F48732F48734F48736F48738F48585F48742F48744F48588F48746F48747

0,020,030,130,260,310,560,750,981,021,432,43

0,100,11

TWN 0940

F080401)

F080422)F080441)

F080462)7070


*For TWN 0835/1 (TWN 0908/0).

Trade Size

Spare Parts for Sling Hooks

(TWN 0835/1, TWN 0858/1, TWN 1340/1)

Article-No. Packaging Unit

1 set1 set1 set1 set1 set1 set1 set1 set1 set1 set1 set

Weightapp. [kgs]

Weightapp. [kgs]

Article-No.

Single Leg

Identification Tag for Single and

Multi Leg Sling Chain

Article-No.

Multi Leg

Diameter

[mm]

1) Without welded ring.2) With welded ring.

102 The Namefor Safety.

Chain and Wire Rope Cutter TWN 0941

Cutting RangeRound link chains according to EN 817-7, EN 818-2-8, 818-2-8, ASTM 391, ASTM 973 – grade 80 / 100 and DIN22 252 up to 26 mm diameter, wire rope up to 30 mm diameter and with a strength of 1600 N/mm2, higher strengthsand larger diameters on request.

Accessories1 set of tools for changing the blades, 2 sets of blades, one each for chains and wire rope

The chain and wire rope cutting machine has one of the above mentioned voltages. The hydraulic tank is filled withhydraulic oil. The oil level is to be checked regularly and refilled if necessary.

Special Accessories1. Holding Clamp: The holding clamp keeps the wire rope at a right angle to the cutting direction.

2. Stroke Adjustment:With the stroke adjustment, the cutting stroke can be adjusted from 0 mm to 50 mm. Theadvantage is that a no load operation is avoided when cutting small diameters (working time is saved).

3. Wire Rope Clamp: The wire rope clamp prevents the wire rope from falling onto the ground after it has been cut,which always has to be picked up (easier to work with and assists working time).

Drive: Electro-hydraulic with 700 kN shearing forceArticle-No.: F48950Voltage: 220/380 V 3 Ph. 50 Hz, 220 V 1 Ph. 50 Hz or 440 V 3 Ph. – 60 Hz, ExportDimensions (L x W x H): app. 1.100 x 920 x 1.500 mm (with closed protection cover)Working Height: app. 1.100 mmWeight: app. 270 kgs

Function and Design

The mobile THIELE universal chain and wire rope cutting machine allowsan easy cutting, mounting and inspection of chain and wire rope slings.

The THIELE universal chain and wire rope cutting machines can beeasily and safely moved due to light steerable wheels and fulfil the latestaccident prevention regulations (DGUV). The compact hydraulic unit iscontrolled by a foot switch, allowing the cutting of chain or wire rope dueto fast interchangeable blades. The cutting machine has a lockable tool compartment and a large work top.

103

TWN 0944

TWN 0945

TWN 0946

TWN 1402

–

–

–

–

Z04575

Z03303

F48856

Z07264

0,01

0,60

0,20

0,05

–

–

–

–

Note: Form to file the regular inspections of slings according to DIN EN standard.

Note: Consisting of 6 punches in a plastic holder to disassemble chains from components.The complete set covers all sizes of the the THIELE Sling System.

Note: For regular wear inspection of chain sizes 6-8 to 32-8.


Trade Size

Trade Size

Trade Size

Trade Size

Chain Card File

Assembly Set

Chain Gauge Set

Identification Tag

Article-No.

Article-No.

Article-No.

Article-No.

Packaging Unit

Packaging Unit

Packaging Unit

Packaging Unit

Weightapp. [kgs]

Weightapp. [kgs]

Weightapp. [kgs]

Weightapp. [kgs]

Note: Identification tag for lashing chains acc. to EN 12195-3.

104

TA 2 A / 10-8 T 2000 TWN 1340/1 RAL 9005 RAL 3003

The Namefor Safety.

THIELE Key Design

Mounted chain slings

TA 2 A / 10-8 - R e a c h - TWN 0856

THIELE chain slingsNo. of legs (1...4)

Execution (master or. intermediate link)Trade size – grade Type of assembly

T - THI-LOK® / R - ringshackleUse length in mm (rounded up)TWN of bottom components

Surface finish of chainStandard: black coloured (RAL 9005)

Colour of componentsStandard: red coloured (RAL 3003)

(only 2 legs off)

105

TK 1 / 10-8 G 1000 TWN RAL 9005 RAL 3003

THIELE Key Design

Endless Chains

Table of available components for mounted chain slings

Master Link* ... TWN 1313 Intermediate Link* ... TWN 0795

Master Link for single leg w. Pin Coupling ... TWN 0820

Suspension Shackle for Skips ... TWN 0869

Chain Coupling Bolt Shackle ... TWN 0862 Special Chain Coupling Shackle ... TWN 0861

Special Coupling Shackle ... TWN 0897 Foundry or Container Hook with Pin Coupling ... TWN 0859

Foundry Hook Cont. or Cont. Eye Hook* ... TWN 0856 Ringshackle ... TWN 0812

Bolt Shackle* ... TWN 0871

Sling Hook w. Pin Coupl. and Safety Latch ... TWN 1340/1 Eye Slip Hook with Safety Latch* ... TWN 0858/1

... TWN 0835/1

Self-locking Eye Hook* ... TWN 0798 Self-locking clevis Hook ... TWN 0799

Special Chain Shackle* ... TWN 0870 THI-LOK® ... TWN 1320

Shortening Hook with Pin Coupling ... TWN 0827 Swivel Hook with Latch* ... TWN 0854

Shortening Hook w. Pin Coupling a. Safety Latch ... TWN 0827/1 Chain Swivel* ... TWN 0845

*For complete Chain Slings with THI-LOK®-Connecting Links.

THIELE-endless chainExcecution

1 – simple (K11)2 – with throughout suspension link (K12)

3 – with built-in suspension link (K22)Trade size – gradeType of assembly

G - welded / M - mountedReach in mm ( )

TWN of componentsSurface finish of chain

Standard: black coloured (RAL 9005)Colour of components

Standard: red coloured (RAL 3003)

Please always indicate the THIELE key design in your order.Example: TK 1 / 10-8 G 1000, RAL 9005 (K11-type with black coloured chain)

106

TATATATATATATATATATATATATATATATATATATATATKTATATATATATATATATATATATKTA

1111111111222222222212444444444424

AAAAAAAAAAAAAAAAAAAA1AAAAAAAAAAA3A

//////////////////////////////////

_ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -__ _ -_

TTTTTTTTTTTTTTTTTTTTMTTTTTTTTTTTMT

_ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _ _

13131340/108540856087008710859086108620858/113130835/1085408560858/1087008710859086108621313132013141340/1085408560858/10870087108590861086213131320

_ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ _

_ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ _

04490450/104540456045804590460046104620476/105290530/1053405360566/1053805390540054105420560056307090710/1071407160735/10718071907200721072207310733

The Namefor Safety.

Examples for the THIELE Key Design

Trade Size Reach

[mm]

Component

[TWN]Chain

[RAL-No.]

Surface Finish

Components[RAL-No.]

Plant Standard

[TWN]

TypeSling

No. of Slings/loops

Execution Typeof As-sem-bly

107

TWN 0449 TWN 0450/1 TWN 0453/1 TWN 0454

TWN 0456 TWN 0458 TWN 0459 TWN 0460

TWN 0461 TWN 0462 TWN 0473 TWN 0475

TWN 0477/1

Examples for Chain Slings

1-Leg Chain Slings

108

TWN 0529 TWN 0530/1 TWN 0533/1 0535/1 TWN 0534

TWN 0536 TWN 0538 TWN 0539 TWN 0540

TWN 0541 TWN 0542 TWN 0545 TWN 560

TWN 0563 TWN 0567/1

The Namefor Safety.


2-Leg Chain Slings

109

TWN 0709 TWN 0710/1 TWN 0713/1 0715/1 TWN 0714

TWN 0716 TWN 0718 TWN 0719 TWN 0720

TWN 0721 TWN 0722 TWN 0730 TWN 0731

TWN 0733 TWN 0736/1

4-Leg Chain Slings


110 The Namefor Safety.

Offshore Products

In the offshore industry, chain slings are exposed to rough environmentalconditions under strong dynamic loads. For this special application, THIELE as an authorized and certified manufacturer,supplies special calibrated welded-type chain slings as per DNV 2.7-1.

111

!Operating Manual

1. Transport and StoringAll products must be protected during transportation, use,and storage in severe weather conditions.

2. Before first useAssembling, disassembling and using should only be ac-complished by authorized persons according to DGUV-R100-500, Chapter 2.8 (in Germany)Check the following points before using the chain sling forthe first time:- all test certificates exist (declaration of conformity, in-spection certificate 3.1.B etc.); the chain sling you aregoing to use is the same that you ordered

- Slinging Chains and Tensioning Chains are provided withthe CE label

- identification and working load limit marked on thechain sling are identical to the corresponding informa-tion indicated on the test certificate; all details concer-ning the chain sling have been entered into the chaincard file

- The mounting is prohibited until it has been found out,that the machine in which should be built in, corre-sponds with the EC Directive for machines and itsamendments ( European rules and regulations).

- In suitable intervals, check the chain sling for damagesor wear (depending upon severity of conditions slingsshall be inspected for damage as frequently as prior toeach lift. All supplied user instructions must be maintained and available for reference until the productis removed from service.

3. Warning and use advice- EC Directive for Machines and its amendments as per2006/42/EG

- Operation and use instructions for chain slings according to DIN 685 - Part 5, EN 818-6.

- Consult safety regulations for round steel chains usedas slinging gear in hot dipped galvanizing plants (Ger-man rules and regulations) according to DGUV-R 109-004

- Consult Safety Regulations for Cranes according toDGUV52

- Consult load Suspension Devices for Lifting Operations(german rules and safety regulations) according toDGUV-R 100-500, Chapter 2.8

- Consult Safety certificate for riggers as per BGI 556- Consult components for sling chains as per EN 1677-2- Consult principles for test of industrial safety of liftingproducts

- Consult slinging of rod iron using steel round steelchains when loading and unloading sea-going ships

- Consult German rules and regulations VDI 2700-2701-2702

Special Components, hooks and clutching devicesshould only be used in straight tensile direction

Especially forbidden is:- the combination of different grades when assembling(except tongs)

- the using of chain slings which do not correspond tograde 80

- overloading- To use a combination of products with different workingload limits, unless the working load noted on the I.D. tagis based on the weakeast component.

- the use of twisted or knotted chains- to use bolts or wires to connect components- to use deformed components, rigid or elongated chains - to lift or pull loads with sharp edges without padding theedges

- to drive equipment over chain sling- to multiple wrap a chain around a loadhook or tensionpoint

- to modify products by welding, burning, bending or other mechanical modifications

- to make inadmissible modifications, e.g. the use of a 2-leg sling chain with shortening hooks as a 4-leg slingchain

- to tip load a hook into a chain link- to apply the load on the tip, side or back of the hook- to load connectors (THI-LOK®) at one side- to adjust chain links or products- to adapt inclination over 60°- to turn swivels or swivel hooks under load- to weld Lifting Point screw type lifting eyes- to exceed the indicated grip on lifting tongs- the use of open or riveted repair links

It must be taken into consideration:In the event that THIELE Chain and Components areused in an automated process, all parts should be de-signed correspondingly larger and inspected at morefrequent intervalls!- the load to be lifted- the free mobility of the hook’s safety latches- the use under chemical influences for example acidsand steam is restricted or prohibited

- the influence of temperature on alloy chain and components

- shock load impacts the chain or fitting while lifting orsecuring

- any type of surface treatment to chain or fittings especially of hot dipped galvanizing can only be carriedout by the manufacturer

- when lifting keep hands and other parts of body faraway from the components

- be careful when locking hooks under load Danger of injury!

- when not in use sling chains must be hung on a rack- ensure free mobility of chain slings or other devices inthe crane hook

- when using hooks without latches pay special attentionto the position of the hook placement

- to the installation positon- if necessary protect screw tensioners bylocking elements to prevent automatic unlocking

- load claws with chains only on the bottom of the pocket claws

- protect chain by padding or wrapping sharp edges- Safety latches should not be obstructed when hooks areloaded

- in case of shortening hooks, load chains must be loadedin the bowl of the hook

- hook openings must point away from the load being lifted

- that the hook up point and lifting hooks are compatible - also be sure that the lifting components are suitable forthe application

- do not sit loads on the chain sling- reduction of working load limits is necessary when making lifts at severe angles

- consult charts when using alloy chain at extremetemperatures

- working load limits must be reduced when using endless and basket slings

- extreme caution should be used when using hooks forlifting molten metal or chemicals

- chain slings shall be loaded properly to avoid damage tochain and load

- keep personnel away from loads being lifted

4. Maintance and tests- The chain sling must be visually inspected before use. If damage is found, you must consult a chain expert according to DGUV-R 100-500.

- The product must be removed from service if the follo-wing damage is found:

- unreadable tags- breaks or deformation- cuts, notches, grooves or cracks- strong corrosion- heating over the admissible temperature allowed- elongation of chain must not exceed 5% of manufacturer’s published size

- elongation of the overall chain length shall not exceed 5 %- to determine wear rejection on the diameter of a link,you must measure the horizontal and the vertical andreject if reduction is more than 10%.

- reject hooks if throat opening is opened greater than10% of new hook or the safety latch does not seat properly

- wear of hook eye or hook body exceed 5 %- missing or damaged safety latch of the hook or shortening component

- incorrect screw replacement on lifting eyes- incorrect or damaged bolts or turn off lockingDon’t repair chain slings yourself unless fully trained.Please contact the manufacturer or a repair expert.Use only original spare parts from THIELE.

5. Regular inspectionsRegular inspection shall include measurement and visualinspection and should be carried out once each year atminimum. Each third year inspection must include thecrack detection (magna flux). On a new chain, you must set up chain card index thatshall contain a description of the chain as well as theidentity of the certificate. The inspection schedule mustbe fixed. The condition of sling chains or tensioningchains and their accessories must be noted at each in-spection. If damage is repaired, all repairs and detailsmust be noted on the chain card.

W A R N I N G!· Sling Chains and Components can only beused, if user instructions and operating in-structions have been read carefully and arecompletely understood.· The indicated values of loads on the I.D.tags must not be exceeded.· Due to improper use, chains can fail.

IT’S A QUESTION OF YOUR SAFETYDeath or injury can occur from improper use or maintenance!

Grade 80 - THIELE · 2019. 10. 14. · 60 TWN 1320 TWN 1314 TWN 0815 TWN 0795 TWN 0810/4 TWN 0797...

Documents

Transcript of Grade 80 - THIELE · 2019. 10. 14. · 60 TWN 1320 TWN 1314 TWN 0815 TWN 0795 TWN 0810/4 TWN 0797...